Answer:
Solution given:
North car
mass[m1]=1460kg
velocity[u1]=27 m/s
mass[m2]=2165kg
velocity [u2]=18m/s
let v be velocity after collision
we have
From the principle of conservation of linear momentum
m1u1+m2u2=(m1+m2)v
1460*27+2165*18=(1460+2165)v
v=[tex] \frac{78390}{3625} [/tex]
v=21.6m/s
the speed after the collision in 21.6 m/s.
For angle.
Tan angle =[tex] \frac{m1u1}{m2u2} [/tex]
Tan angle =[tex] \frac{1460*27}{2165*18} [/tex]
Tan angle=327.74
angle=Tan-¹(327.74)=89.82=90°
in degrees north of east is 90°
True False: Marke each statement as true or false.
shift
1. Light intensity affects the rate of photosynthesis.
in
2. Energy is required by all organisms for life.
3. The ability of a plant to repair tissue depends on respiration.
4. The gas needed for photosynthesis is carbon dioxide (CO2).
5. Plants only carry on photosynthesis, not respiration.
6. Respiration can occur without photosynthesis.
Answer:
1) true 2) true 3) true 4) true 5) false 6) false
Explanation:
Please help... I'm confused on what I represents in terms of solving the total current. Would variable would I be singling out?
Answer:
the researcher say hi for us the best pa the best of us are going out to eat that I can get my money toward a little bit but the best of luck to be at work by then and we will see what the status
After 60 days, 100g of a certain element has decayed to only 12.5g.
What is the half- life of this element?
А
30 days
B.
8 days
С
20 days
D
5 days
Answer:
8 days
Explanation:
Which of the following statements about asexual reproduction is NOT true? A Only one parent sex cell is needed. B The offspring are copies of the parent. C Most single-celled organisms reproduce this way. Dit results in more variation in species than does sexual reproduction
Answer:
D
Explanation:
D is false because asexual reproduction produces offspring much more similar to the parent than that produced in sexual reproduction.
A parallel beam of light of wavelength 4.5 x 10^-7 m is incident on a pair of slits that are 5.0 x 10^-4 m apart. The interference pattern is focused on a screen 2.0 m from the slits. The separation between two adjacent bright fringes is most nearly:_________
Answer:
1.8x10⁻³m
Explanation:
From the question above, the following information was used to solve the problem.
wavelength λ = 4.5x10⁻⁷m
Length L = 2.0 meters
distance d = 5 x 10₋⁴m
ΔY = λL/d
= 4.5x10⁻⁷m (2) / 5 x 10₋⁴m
= 0.00000045 / 0.0005
= 0.0000009/0.0005
= 0.0018
= 1.8x10⁻³m
from the solution above The separation between two adjacent bright fringes is most nearly 1.8x10⁻³m
thank you!
b. Why are the resources listed in part (a) considered "renewable"?
Answer:
I would need to see the part a to be more specific but this may help:
resources like solar, water, wind are considered renewable because they will never run out, they can be replenished over and over again. There will always be a sun (and if there wasn't then we'd have bigger conserns than renewable energy) and the wind will always blow. It can never run out because you use too much unlike coal and fossil fuels.
Hope this helps!
The temperature of a body is from 200 to 300C.The change of temp at absolute scale is
Answer:
mark me brainliest
Explanation:
The change of temperature at absolute scale is. A. 3.73 K
Answer:
373K
Explanation:
300°c - 200°c =100°c
Absolute scale means Kelvin scale so
0°c= 273°c
100°c = 100 + 273
=373K
what is the value of 3 in
24.635
Answer:
3 tens
Explanation:
The value
of 3 in 24.635 is at 3 tens place as the place is two to the left.
The correct answer to the given is question is "0.03".
What is Place Value?The value of each digit in a number is known as place value.For example the 2 in 125 represent 2 tens or 20, however the 2 in 2103 represent 2 thousands or 2000.Frequently, they will only include the letters like Millions, Hundred Thousands, Ten Thousands, Thousands, Hundreds, Tens, Ones, tenths, hundredths, and so on to denote each place. How to solve this question?Let's display the number 24.635 using a place value chart.
Tens -> 2 Ones -> 4 Tenth -> 6 Hundredths -> 3 Thousandths -> 5
The 3 is in Hundredths Place or the value of 3 in 24.635 is 0.03.
Thus, we can conclude that the value of 3 in 24.635 is 0.03 after solving the question.
Learn more about Place Value here:
https://brainly.com/question/569339
#SPJ2
2. A force of magnitude 44 N compresses a spring 0.69 m from equilibrium. What is the value of the spring constant?
60 N/m
64 N/m
32 N/m
49 N/m
Answer:
Spring constant = 63.77 N/m
Explanation:
Given the following data;
Force = 44 N
Extension = 0.69 m
To find the spring constant;
Force = spring constant * extension
Substituting into the formula, we have;
44 = spring constant * 0.69
Spring constant = 44/0.69
Spring constant = 63.77 N/m
In a double-slit experiment, the third-order maximum for light of wavelength 510 nm is located 17 mm from the central bright spot on a screen 1.6 m from the slits. Light of wavelength 670 nm is then projected through the same slits. Part A How far from the central bright spot will the second-order maximum of this light be located
Answer:
14.9 mm
Explanation:
We know dsinθ = mλ where d = separating of slit, m = order of maximum = 3 and λ = wavelength = 510nm = 510 × 10⁻⁹ m
Also tanθ = L/D where L = distance of m order fringe from central bright spot = 17 mm = 0.017 m and D = distance of screen from slit = 1.6 m
So, sinθ = mλ/d
Since θ is small, sinθ ≅ tanθ
So,
mλ/d = L/D
d = mλD/L
Substituting the values of the variables into the equation, we have
d = 3 × 510 × 10⁻⁹ m × 1.6 m/0.017 m
d = 2448 × 10⁻⁹ m²/0.017 m
d = 144000 × 10⁻⁹ m
d = 1.44 × 10⁻⁴ m
d = 0.144 × 10⁻³ m
d = 0.144 mm
Now, for the second-order maximum, m' of the 670 nm wavelength of light,
m'λ'/d = L'/D where m' = order of maximum = 2, λ' = wavelength of light = 670 nm = 670 × 10⁻⁹ m, d = slit separation = 0.144 mm = 0.144 × 10⁻³ m, L' = distance of second order maximum from central bright spot and D = distance of screen from slit = 1.6m
So, L' = m'λ'D/d
So, substituting the values of the variables into the equation, we have
L' = 2 × 670 × 10⁻⁹ m × 1.6 m/0.144 × 10⁻³ m
L' = 2144 × 10⁻⁹ m²/0.144 × 10⁻³ m
L' = 14888.89 × 10⁻⁶ m
L' = 0.01488 m
L' ≅ 0.0149 m
L' = 14.9 mm
PLEASE HELP I WILL MARK BRAINLYIST!!!!!!!!!
All of the matter in the universe formed after the big bang. Scientists
predicted that hydrogen and helium would be the most abundant elements.
What did scientists discover?
A. The universe has 73% hydrogen and 25% helium, which does not
support the big bang theory
B. Planets are made mostly of other elements, which does not
support the big bang theory
C. Stars are made mostly of other elements, which supports the big
bang theory
D. The universe has 74% hydrogen and 24% helium, which supports
the big bang theory.
Answer:
The answer is D. Here is proof . Plz mark brainliest
Explanation:
A golf club rotates 215 degrees and has a length (radius) equal to 29 inches. The time it took to swing the club was 0.8 seconds. What is the average linear velocity (inches/second) of the golf club
Answer:
The average linear velocity (inches/second) of the golf club is 136.01 inches/second
Explanation:
Given;
length of the club, L = 29 inches
rotation angle, θ = 215⁰
time of motion, t = 0.8 s
The angular speed of the club is calculated as follows;
[tex]\omega = (\frac{\theta}{360} \times 2\pi, \ rad) \times \frac{1}{t} \\\\\omega = (\frac{215}{360} \times 2\pi, \ rad) \times \frac{1}{0.8 \ s} \\\\\omega = 4.69 \ rad/s[/tex]
The average linear velocity (inches/second) of the golf club is calculated as;
v = ωr
v = 4.69 rad/s x 29 inches
v = 136.01 inches/second
Therefore, the average linear velocity (inches/second) of the golf club is 136.01 inches/second
During an auto accident, the vehicle's air bags deploy and slow down the passengers more gently than if they had hit the windshield or steering wheel. According to safety standards, the bags produce a maximum acceleration of 60g, but lasting for only 32 ms (or less). How far does a person travel in coming to a complete stop in 32 ms at a constant acceleration of 60g
Answer:
s = 0.3 m
Explanation:
In order to calculate the distance traveled by the person, we will use the second equation of motion:
[tex]s = v_it + \frac{1}{2}at^2[/tex]
where,
s = distance traveled = ?
vi = initial speed = 0 m/s
t = time = 32 ms = 0.032 s
a = acceleration = 60g = (60)(9.81 m/s²) = 588.6 m/s²
Therefore,
[tex]s = (0\ m/s)(0.032\ s)+\frac{1}{2}(588.6\ m/s^2)(0.032\ s)^2[/tex]
s = 0.3 m
Which of the following phase changes occurs at point B on the phase diagram shown below? (choose all that apply)
solid
liquid
gas
T
melting
sublimating
boiling
condensing
Answer:
Condensation and Melting
Explanation:
Gas to liquid = Condensation
Solid to liquid = Melting
An electrical insulator is a material that:
A) contains no charge
B) does not allow electrons to flow
C) has more protons than electrons
D) must be a crystal
Answer:
Option B is appropriate for this question
Solve the following problem. A force of 5N is being applied to the right, and a force of
3N is being applied to the left. What is the net force?
A- 15 N
B- 8 N
C- 7N
D- 2N
Answer:
D 2N
Explanation:
these are opposite forces so one becomes negative and the other positive that is
-3+5=2 or 5-3=2
A magnetic field of 0.27 T exists in the region enclosed by a solenoid that has 599 turns and a diameter of 9.29 cm. Within what period of time must the field be reduced to zero if the average magnitude of the induced emf within the coil during this time interval is to be 12.8 kV
Answer: [tex]8.54\times 10^{-5}\ s[/tex]
Explanation:
Given
The initial magnetic field is [tex]B=0.27\ T[/tex]
No of turns [tex]N=599\ \text{turns}[/tex]
Diameter of the solenoid [tex]d=9.29\ cm[/tex]
Induced EMF [tex]E=12.8\ kV[/tex]
Induced emf is the product of no of turns and rate of change of flux.
[tex]\Rightarrow E=-N\cdot \dfrac{\Delta \phi }{\Delta t}\\\\\Rightarrow E=-N\cdot \dfrac{\Delta (B\cdot A)}{\Delta t}\\\\\Rightarrow E=-NA\cdot \dfrac{\Delta B}{\Delta t}\\\\\text{Insert the values}\\\\\Rightarrow 12.8=-599\times \pi r^2\cdot \dfrac{(0-B)}{\Delta t}\\\\\Rightarrow \Delta t=\dfrac{599\times \pi \times (4.64\times 10^{-2})\times 0.27}{12.8\times 10^3} \\\\\Rightarrow \Delta t=854.71\times 10^{-7}\ s\\\\\text{Taking absolute value}\\\Rightarrow \Delta t=8.54\times 10^{-5}\ s[/tex]
A skydiver weighing 200 lbs with clothes that have a drag coefficient of .325 is falling in an area that has an atmospheric density of 1.225 kg/m2 (and assuming that altitude has a negligible effect on atmospheric density). The skydiver can change the body orientation from straight-erect with a cross-sectional area of 6 sqft to a belly-flat cross-sectional area of 24 sqft. Calculate the terminal velocity of the person when the body has straight and when the body has belly-flat orientations. Calculate the terminal velocity on these two different orientations.
Answer:
The right solution is:
(a) 89.455 m/s
(b) 44.73 m/s
Explanation:
The given values are:
Mass,
m = 200 lbs
or,
= [tex]\frac{200}{2.205} \ kg[/tex]
= [tex]90.7 \ kg[/tex]
Air's density,
[tex]\delta = 1.225 \ kg/m^3[/tex]
Drag coefficient,
[tex]C_d=0.325[/tex]
When body is straight, area,
[tex]A_1=6 \ ft^2[/tex]
As we know,
Terminal velocity,
⇒ [tex]V_t=\sqrt{\frac{2W}{C_d \delta A} }[/tex]
or,
⇒ [tex]=\sqrt{\frac{2mg}{C_d \delta A} }[/tex]
At straight orientation,
⇒ [tex]V_t'=\sqrt{\frac{2\times 90.7\times 9.8}{0.325\times 1.225\times 0.558} }[/tex]
⇒ [tex]=\sqrt{\frac{1777.72}{0.223}}[/tex]
⇒ [tex]=89.455 \ m/s[/tex]
When belly flat,
⇒ [tex]V_t''=\sqrt{\frac{2\times 90.7\times 9.8}{0.325\times 1.225\times 0.558\times 4} }[/tex]
⇒ [tex]=\sqrt{\frac{1777.72}{0.889} }[/tex]
⇒ [tex]=44.73 \ m/s[/tex]
please help, im having trouble can you please explain how to do it
Answer:
independent and the second one with the (-8, 1, -3)
Question 15 of 25
You feel warm sitting next to a bright light. Which type of heat transfer are
Experiencing?
Answer:
radiation
Explanation:
A 1 kg flashlight is dropped from rest and falls to the floor without air resistance . At the point during its fall, when it is 0.7 meters above the floor, its potential energy exactly equals its kinetic energy. How fast is the flashlight moving at this point, in m/s 3.7
Answer:
The speed of the flashlight at that point is 3.7 m/s
Explanation:
When an object of mass M is at a height H above the ground, the potential energy of the object is:
U = M*H*g
Where g is the gravitational acceleration, g = 9.8 m/s^2
And for an object with velocity v, the kinetic energy is:
K = (M/2)*v^2
We know that when the flashlight of mass 1kg is 0.7 meters above the ground, the potential energy is equal to the kinetic energy, then:
M = 1kg
H = 0.7m
g = 9.8 m/s^2
Replacing these in the equations, we get:
U = K
(1kg)*(0.7m)*(9.8 m/s^2) = ((1kg)/2)*v^2
As the mass factor appears in both sides, we can remove it:
(0.7 m)*(9.8 m/s^2) = (v^2)/2
Now we can multiply both sides by 2:
2*(0.7 m)*(9.8 m/s^2) = v^2
Now let's apply the square root to both sides:
√(2*(0.7 m)*(9.8 m/s^2)) = v = 3.7 m/s
g hoop rolls without slipping on a horizontal surface. The hoop has a mass m and radius r. What is the ratio of the hoop's translational kinetic energy to the hoop's rotational kinetic energy, KT /KR
Answer:
[tex]\frac{K.E_t}{K.E_r} = 1[/tex]
Explanation:
The translational kinetic energy of the hoop is given as:
[tex]K.E_t = \frac{1}{2} mv^2[/tex] ---------------------- equation (1)
where,
[tex]K.E_t[/tex] = translational kinetic energy
m = mass of hoop
v = linear speed of hoop
The rotational kinetic energy of the hoop is given as:
[tex]K.E_r = \frac{1}{2} I\omega^2[/tex]
where,
[tex]K.E_r[/tex] = rotational kinetic energy of the hoop
I = Moment of Inertia of the hoop = mr²
r = radius of the hoop
ω = angular speed of hoop = [tex]\frac{v}{r}[/tex]
Therefore,
[tex]K.E_r = \frac{1}{2} (mr^2)(\frac{v}{r} )^2\\\\K.E_r = \frac{1}{2} mv^2[/tex]------------------- equation (2)
dividing equation (1) and equation (2), we get:
[tex]\frac{K.E_t}{K.E_r} = \frac{\frac{1}{2}mv^2 }{\frac{1}{2}mv^2 }\\\\\frac{K.E_t}{K.E_r} = 1[/tex]
Select the correct answer. A body travels 10 meters during the first 5 seconds of its travel, and it travels a total of 30 meters over the first 10 seconds of its travel. What is its average speed during the time from t = 5 seconds to t = 10 seconds? A. 2 meters/second B. 3 meters/second C. 4 meters/second D. 5 meters/second E. 6 meters/second
Answer:
2 m/s
Explanation:
...........................
Answer:
A:2 m/s
Explanation:
Plato
The power output of a car engine running at 2500 rpm is 500 kW . You may want to review (Pages 574 - 577) . Part A How much work is done per cycle if the engine's thermal efficiency is 20.0 %
Answer:
Explanation:
2500 rpm = 2500 / 60 rps ( revolution per second )
= 41.67 rps .
power output = 500 kW
thermal efficiency = 20 %
power input = (100 /20) x 500 kW
= 2500 kW .
work done per second = 2500 kJ
work done per cycle = 2500 / 41.67
= 60 kJ .
We have that the workdone per cycle is mathematically given as
Wc=12.00KJ
Workdone per cycle of engineQuestion Parameters:
The power output of a car engine running at 2500 rpm is 500 kW
Generally the work done per cycle is mathematically given as
Wc=500*1/41.666
Where
=2500rev/60sec
=41.666
Meaning one cycle takes 1/41.666
Hence
Wc=500*1/41.666
Wc=12.00KJ
For more information on work
https://brainly.com/question/756198
An electrical appliance draws 9.0 amperes of current when connected to a 120-volt
source of potential difference. What is the total amount of power dissipated by this
appliance?
1100 W
110 W
13 W
130 W
Answer:
The correct answer is "1080 W".
Explanation:
Given:
Current,
I = 9.0 A
Potential difference,
V = 120 volt
As we know,
⇒ [tex]Power=IV[/tex]
On substituting the values, we get
⇒ [tex]=120\times 9.0[/tex]
⇒ [tex]=1080 \ W[/tex]
A current of 5 a flows in a copper wire for 20 s. how many coulombs of charge passed through the wire in this time?
Answer:
I think so too
Explanation:
:*
En una carga de prueba de 2 microcoulomb se sitúa en un punto en el que la intensidad del campo eléctrico es de 5 * 10 / 2 N/C cuál es la fuerza de la magnitud que actúa sobre ella?
Answer:
Fuerza, F = 0.001 Newton
Explanation:
Dados los siguientes datos;
Intensidad del campo eléctrico = 5 * 10² N/C
Carga = 2 microculombios = 2 * 10^{-6} culombios
Para encontrar la fuerza que actúa sobre la carga;
Matemáticamente, la intensidad del campo eléctrico viene dada por la fórmula;
Intensidad del campo eléctrico = fuerza/carga
F = E * Q
F = 5 * 10² * 2 * 10^{-6}
Fuerza, F = 0.001 Newton
using the image provided, which moon phase is next?
Answer:
Waning Crescent
Answer: waxing crescent
Explanation:
Describe each of the FITT training principles. (Site 1
Answer:
The FITT principles are an exercise prescription to help participants understand how long and how hard they should exercise. FITT is acronym that stands for Frequency, Intensity, Time, and Type. FITT can be applied to exercise in general or specific components of exercise.
Explanation:
a spring has a spring constant of 330 n/m. how far is the spring compressed when 150 newtons of force are used?
a. 0.0014 meters
b. 0.45 meters
c. 2.2 meters
d. 5.0 meters
show your work
Answer:
I think its B
Explanation: