Answer:
a) 10.23°C
b) - 0.8795 kJ / k
Explanation:
Given data :
mass of ice = 100 gram = 0.1 kg
mass of water in calorimeter = 100 grams = 0.1kg
temperature of water in calorimeter = 373K
a) Determine the Final temperature of the water once thermal equilibrium is established
Heat lost by water = heat gained by Ice
Mwater * CPwater * Δt = Mice * Lice + Mice * CPwater * Δt
0.1 * (4.2 * 10^3 ) * ( 100 - t ) = ( 0.1 * 334 * 10^3 ) + 0.1 * (4.2 *1063 ) * ( T - 0 )
42000 = 33400 + 0.2 * 4200 * T
∴ equilibrium temp ( T ) = 10.23°C
B) Determine the entropy change of the universe of the process
Entropy change of ice = 33400/ 273 + 0.1 * 42 * 10^3 * In 283.23 / 273
= 276.84 J/K
Entropy change of water = 0.1 * 42* 10^3 * In 283.23 / 273
= -1156.34 J/K
Hence Entropy change of variance = 276.84 J/K + ( - 1156.34 J/K )
= - 0.8795 kJ / k
What happens if you are riding your bike and hit something (like a curb) with the front wheel
Which is a tool that use in medicine to view internal organs and pregnancy
Electromagnetic waves used in cell phones are called
a. radio waves
b.microwaves
c. Gamma rays
d. Ultraviolet rays
Answer:
A.Radio waves
Explanation:
Which device increases or decreases voltage as electricity is transmitted from power plants to homes and businesses?
generator
power line
transformer
turbine
Answer:Transformer
Explanation:All the other devices generate their own electricity apart from power line and Transformer, power line just carries electricity. A transformer can be used to step up or step down voltages from a source.
Answer:
transformer!! :)
Explanation:
When a 2kg metal is exposed to 2MJ of
heat it dissolves into liquid at 500K
Calculate the latent heat of fusion for
the metal. Betty went in to get you metal is exposed to to megajoules of heat
Answer:
1×10⁶ J/Kg
Explanation:
From the question given above, the following data were obtained:
Mass (m) of metal = 2 Kg
Heat (Q) = 2 MJ
Latent heat of Fusion (Hf) =?
Next, we shall convert 2 MJ to J. This can be obtained as follow:
1 MJ = 1×10⁶ J
Therefore,
2 MJ = 2 MJ × 1×10⁶ J / 1 MJ
2 MJ = 2×10⁶ J
Finally, we shall determine the latent heat of fusion. This can be obtained as follow:
Mass (m) of metal = 2 Kg
Heat (Q) = 2×10⁶ J
Latent heat of Fusion (Hf) =?
Q = m•Hf
2×10⁶ = 2 × Hf
Divide both side by 2
Hf = 2×10⁶ / 2
Hf = 1×10⁶ J/Kg
Thus, the latent heat of fusion for the metal is 1×10⁶ J/Kg
1. Budding is a way that some very tiny organisms can reproduce.
True
False
____________________________________
Male-female reproduction needs two parent cells to begin.
True
False
Answer:1.. true 2 false
Explanation:
Which of the following is true of work?
A. Work = force x distance
B. Work = force x how tired you feel
C. Work = force x weight of the object
D. Work = weight of the object x how tired you feel
Answer:
Explanation:
C: Force and Weight are related. This is not the answer.
B: Not true Much as we might feel this way after working, it is not the answer either. Not in Physics at least.
D: is treated the same way as B.
A: is the actual answer in physics. How you feel has nothing to do with it. Work is some Force moving a distance. Both are needed.
A gas is stored in a sealed container of constant volume. The temperature of the gas increases.
This causes the pressure of the gas to increase
What happens to the gas molecules during this pressure increase?
A The average kinetic energy of the molecules increases.
B The average separation of the molecules decreases
The average separation of the molecules increases,
с
D
The volume of each molecule increases.
Answer:
If the gas volume is decreased, the container wall area decreases and the molecule-wall collision frequency increases, both of which increase the pressure exerted by the gas. Avogadro's law. At constant pressure and temperature, the frequency and force of molecule-wall collisions are constant.
Explanation:
As the temperature increases, the average kinetic energy increases as does the velocity of the gas particles hitting the walls of the container. The force exerted by the particles per unit of area on the container is the pressure, so as the temperature increases the pressure must also increase.
As the temperature of the gas increases, the particles gain kinetic energy and their speed increases. This means that the particles hit off the sides more often and with greater force. Both of these factors cause the pressure of the gas to increase.
What is temperature ?
Temperature is a measure of the degree of hotness of a body. The SI unit of temperature is kelvin (K).The instrument used to measure temperature is called a thermometer.
What is kinetic energy ?
Kinetic energy is a form of energy that an object or a particle has by reason of its motion. If work, which transfers energy, is done on an object by applying a net force, the object speeds up and thereby gains kinetic energy.
Know more about kinetic energy here
https://brainly.com/question/5223218
#SPJ2
Rolled cookies are cut into fancy shapes.
True
False
Answer:
false
Explanation:
the answer is false
Answer:
true
Explanation:
cause why not, try new things init
Explain how this makes sense in consideration of the equation for speed (speed = distance/ time)
Answer: Ok um so The formula for speed is speed = distance ÷ time. To work out what the units are for speed, you need to know the units for distance and time. In this example, distance is in metres (m) and time is in seconds (s), so the units will be in metres per second (m/s).
Explanation:
In light of the speed equation (speed = distance/time), this makes sense. because the speed unit is appropriate.
What is speed?Speed is defined as the rate of change of the distance or the height attained. it is a time-based quantity. it is denoted by u for the initial speed while v for the final speed. its si unit is m/sec.
The unit of distance is the meter and the unit of time is a second.
The distance is found as follows;
Distance = speed × time
speed = distance/ time
Put the units in formula;
speed = m/sec
m/sec=m/sec
This makes sense in consideration of the equation for speed (speed = distance/ time). Because the unit of speed is justified.
Hence,in consideration of the speed equation, (speed = distance/time), this makes sense.
To learn more about the speed refer to the link;
https://brainly.com/question/7359669
#SPJ2
Theano was one of the first known mathematicians.
A. True
B. False
Answer:
Theano is considered by some to be the first known woman mathematician. Based on the works that have survived, it is thought that she worked on The Golden Mean and The Golden Rectangle. While her exact life story remains unknown, she is believed to be either the student or wife of Pythagoras, and sometimes both.
True
Answer: False
Explanation: It's a software
2. What will be the extension of this spring if the load is a) 4N and b) 75 g?
Answer:
6
Explanation:
just add
PLEASE HELP ASAP!!!
An object has a kinetic energy of 50 J and a velocity of 5 m/s, what is the mass of the
object?
A. 4 kg
B. 55 kg
С. 10 kg
D. 1 kg
Answer:
0.5mv^2=50, v=5, 25/2×m=50, m=50×2/25, So, the answer is 4
If a force is applied, but the object does
not move, what can we say about the
amount of work that is done?
A. Some work is done.
B. No work is done.
C. The work equals the force.
D. A large amount of work is done.
Answer:
doesn't move, no work is done; if a force is applied and the object moves a distance d in a direction other than the direction of the force, less work is done than if the object moves a distance d in the direction of the applied.
Answer:
B. No work is done.
Explanation:
Work is only done when the object moves in the direction of the force.
What order shows increasing frequency for gamma
rays, microwaves, visible light, and X-rays?
A. gamma rays, X-rays, visible light, microwaves
B. microwaves, visible light, X-rays, gamma rays
C. visible light, gamma rays, microwaves, X-rays
D. X-rays, microwaves, gamma rays, visible light
Answer:
The answer is B: microwaves, visible light, X-rays, gamma rays
Explanation:
I had the same question and I got option B as the correct answer.
The waves arranged in their order of increasing frequency will be
Microwaves,Visible light, X-rays and Gamma rays.What order shows the increasing frequency for gamma rays, microwaves, visible light, and X-rays?Generally, frequency is the numeral of occurrences of a repeating event per unit of duration.
Therefore, gamma rays, microwaves, visible light, and X-rays will be arranged in their order of increasing frequency
In conclusion, The order is given as folllows
microwaves, Visible light, X-rays, and Gamma rays.
Option B is correct
Read more about Wave
https://brainly.com/question/3004869
Constructive interference occurs when the crest of 2 waves meet. This can occur when 2 troughs meet as well. When this occurs, water waves look
A- the same (no change)
B- larger
C- invisible
D- smaller
Answer:
B; LargerExplanation:
I took the K-12 quiz, and that was the correct answer. Hope this helped!The tundra is located _______.
a.
north of the equator
b.
south of the equator
c.
along the equator
d.
both north and south of the equator
Please select the best answer from the choices provided
A
B
C
D
Answer:
d: both north and south
Explanation:
10. What patterns do you notice between the angles of incidence and the
angles of the reflected light rays?
1
EXPLORE/EXPLAIN Lesson 2 Reflection and Mir
Answer:
The law of reflection states that the angle of reflection equals the angle of incidence—θr = θi. The angles are measured relative to the perpendicular to the surface at the point where the ray strikes the surface.
An experimental procedure calls for 35.9 g sodium chloride and 15.2 g silver nitrate. What tool should be used to measure these substances?
Answer:
Electronic Balance
Explanation:
A lightbulb has a power rating of 6.75 W and draws a current of 0.75 A when connected to a battery.
b. What is the voltage of the battery?
c. What is the resistance of the lightbulb?
Two copper rods are rubbed together will they become charged
Answer:
Explanation:When insulating materials rub against each other, they may become electrically charged . Electrons , which are negatively charged, may be 'rubbed off' one material and on to the other. The material that gains electrons becomes negatively charged.
miniature spring-loaded, radio-controlled gun is mounted on an air puck. The gun's bullet has a mass of 5.00 g, and the gun and puck have a combined mass of 120 g. With the system initially at rest, the radio controlled trigger releases the bullet causing the puck and empty gun to move with a speed of 0.500 m/s. What is the bullet's speed
Answer:
12 m/s
Explanation:
From the question,
Applying the law of conservation of momentum,
total momentum before collision = Total momentum after collision
mu+Mu' = mv+Mv'........................... Equation 1
Where m = mass of the bullet, u = initial velocity of the bullet, M = combined mass of the gun and the puck, u' = initial velocity of the gun and the puck, v = final velocity of the bullet, v' = final velocity of the gun and the puck
make v the subeject of the equation
v = [(mu+Mu')-Mv']/m................. Equation 2
Given: m = 5.00 g = 0.005 kg, M = 120 g = 0.12 kg, u = u' = 0 m/s (at rest), v' = 0.5 m/s
Substitute these values into equation 2
v = [0-(0.12×0.5)]/0.005
v = -0.06/0.005
v = -12 m/s
The negative sign can be ignored since we are looking for the speed, which has only magnitude.
Hence the speed of the bullet is 12 m/s
You push
on box A with a horizontal
100-N force (Fig. Q4.31). Box A
weighs 150 N, and box B
weighs 50 N. Is the force that
box A exerts on box B equal to 100 N, greater than 100 N, or less than 100 N? Explain.
2. Which process is used by plants to cycle water from the ground, through the roots, and out the leaves as water vapor?
sublimation
O perspiration
O transpiration
O runoff
Answer:
The answer is transpiration
In 1994, Leroy Burrell of the United States set what was then a new world record for the men’s 100 m run. He ran the 1.00 102 m distance in 9.5 s. Assuming that he ran with a constant speed equal to his average speed, and his kinetic energy was 3.40 103 J, what was Burrell’s mass?
Answer:
61.33 Kg
Explanation:
From the question given above, the following data were obtained:
Distance = 1×10² m
Time = 9.5 s
Kinetic energy (KE) = 3.40×10³ J
Mass (m) =?
Next, we shall determine the velocity Leroy Burrell. This can be obtained as follow:
Distance = 1×10² m
Time = 9.5 s
Velocity =?
Velocity = Distance / time
Velocity = 1×10² / 9.5
Velocity = 10.53 m/s
Finally, we shall determine the mass of Leroy Burrell. This can be obtained as follow:
Kinetic energy (KE) = 3.40×10³ J
Velocity (v) = 10.53 m/s
Mass (m) =?
KE = ½mv²
3.40×10³ = ½ × m × 10.53²
3.40×10³ = ½ × m × 110.8809
3.40×10³ = m × 55.44045
Divide both side by 55.44045
m = 3.40×10³ / 55.44045
m = 61.33 Kg
Thus, the mass of Leroy Burrell is 61.33 Kg
How many joules of gravitational potential energy does a person have after they went up stairs that are 10 meters tall? Assume the person has a mass of 60 kilograms. And assume this takes place on earth.
Answer:
P = 5880 J
Explanation:
Given that,
The mass of a person, m = 60 kg
The height of the stairs, h = 10 m
We need to find the gravitational potential energy of the person. The formula is as follows :
[tex]P=mgh[/tex]
Substitute all the values,
[tex]P=60\times 9.8\times 10\\\\P=5880\ J[/tex]
So, the required gravitational potential energy is equal to 5880 J.
On a spaceship designed to support a multiyear voyage to the outer planets of the solar system, plants will be grown to provide oxygen and to recycle carbon dioxide. Because the spaceship will be so far from the sun, an artificial light source will be needed to support photosynthesis. Which wavelengths of light should be used to maximize plant growth?
Answer:
A mixture of blue & red light.
Explanation:
During photosynthesis, the oxygen delivered emanates from water particles and if a weighty isotope of oxygen atom was noticed in delivered sub-atomic oxygen, the water atoms were marked with the hefty isotope.
In order to maximize the growth rate of the plant, the required wavelength of light to be used is a mixture of blue & red light. This is on the grounds that as the absorption optima of plant's photoreceptors are at wavelength frequency of red and blue light, subsequently the combination of red and blue light would be ideal for plant growth and development.
The productivity of red (650–665 nm) LEDs on plant development is straightforward on the grounds that these wavelength frequencies entirely fit with the retention pinnacle of chlorophylls and phytochrome, while the enhanced blue light presented the possibility that development under regular light could be mirrored utilizing blue and red LEDs with negligible use of energy.
How much work is done to increase the speed of a 1.0 kg toy car by 5.0 m/s?
50 J,
12.5 J,
25 J,
49 J
Answer:
The correct option is (b).
Explanation:
We need to find the work done to increase the speed of a 1 kg toy car by 5 m/s.
We know that, the work done is equal to the kinetic energy of an object i.e.
[tex]W=\Delta K\\\\W=\dfrac{1}{2}mv^2\\\\W=\dfrac{1}{2}\times 1\times 5^2\\W=12.5\ J[/tex]
So, 12.5 J of work is done to increase the speed of a 1.0 kg toy car by 5.0 m/s.
Two sticky spheres are suspended from light ropes of length LL that are attached to the ceiling at a common point. Sphere AA has mass 2mm and is hanging at rest with its rope vertical. Sphere BB has mass mm and is held so that its rope makes an angle with the vertical that puts BB a vertical height HH above AA. Sphere BB is released from rest and swings down, collides with sphere AA, and sticks to it.
In terms of H,H, what is the maximum height above the original position of A reached by the combined spheres after their collision?
Answer:
h’ = 1/9 h
Explanation:
This exercise must be solved in parts:
* Let's start by finding the speed of sphere B at the lowest point, let's use the concepts of conservation of energy
starting point. Higher
Em₀ = U = m g h
final point. Lower, just before the crash
Em_f = K = ½ m [tex]v_{b}^2[/tex]
energy is conserved
Em₀ = Em_f
m g h = ½ m v²
v_b = [tex]\sqrt{2gh}[/tex]
* Now let's analyze the collision of the two spheres. We form a system formed by the two spheres, therefore the forces during the collision are internal and the moment is conserved
initial instant. Just before the crash
p₀ = 2m 0 + m v_b
final instant. Right after the crash
p_f = (2m + m) v
the moment is preserved
p₀ = p_f
m v_b = 3m v
v = v_b / 3
v = ⅓ [tex]\sqrt{2gh}[/tex]
* finally we analyze the movement after the crash. Let's use the conservation of energy to the system formed by the two spheres stuck together
Starting point. Lower
Em₀ = K = ½ 3m v²
Final point. Higher
Em_f = U = (3m) g h'
Em₀ = Em_f
½ 3m v² = 3m g h’
we substitute
h’= [tex]\frac{v^2}{2g}[/tex]
h’ = [tex]\frac{1}{3^2} \ \frac{ 2gh}{2g}[/tex]
h’ = 1/9 h
A5 N object at a height has gravitational potential energy of 30 J. What is the height of the object?
30=5×h then divide both sides by 5 you will get h=6m
If a 5 N object at a height has a gravitational potential energy of 30 J , then the height of the object would be 6 meters.
What is mechanical energy?Mechanical energy is the combination of all the energy in motion represented by total kinetic energy and the total potential energy stored energy in the system which is represented by total potential energy.
As given in the problem a 5 N object at a height has gravitational potential energy of 30 J, then we have to find the height of the object.
Similarly, the total gravitational potential energy of the object,
PE = m × g × h
30 = 5 × h
h = 30 / 5
h = 6 meters
Thus, if a 5 N object at a height has a gravitational potential energy of 30 J, then the height of the object would be 6 meters.
To learn more about mechanical energy from here, refer to the link given below ;
brainly.com/question/12319302
#SPJ2