Which is one-dimensional
A.
acceleration
B.
all of them
C.
speed
D.
velocity
Answer:
B
Explanation:
They are all one-dimensional
calculate the magnitude of distance and displacement of a body moving in a complete circle
Answer:
Total distance = 2πr
Total displacement = 0
Explanation:
To Calculate the magnitude of distance and displacement of a body moving in a complete circle, we must come to these facts that:
The distance = circumference of the circle which is equal to the product of 2 ,pi and radius r
That is
Circumference = 2πr
Since velocity is changing and not constant, it is a vector quantity. Likewise displacement is a vector quantity.
The total displacement will be equal to zero.
Therefore, total distance is equal to the circumference of a circle while total displacement is equal to zero.
A hockey puck slides with a constant velocity across a frictionless ice surface. In one paragraph, using your own words, describe the net force on the hockey puck and the observation which allowed you to draw that conclusion.
Answer:
The net force on the hockey puck is zero because it's acceleration is zero due to constant velocity.
The hockey will remain in it's uniform motion unless compelled by an external force.
Explanation:
[tex]from \: vector \: mechanics \\ a = \frac{dv}{dt} \\ but \: at \: constant \: velocity \\ \frac{dv}{dt} = 0 \\ hence : \: \: a = \frac{0}{dt} \\ a = 0[/tex]
a measuring cylinder contains water when put rock level rises what is volume of rock
Answer:
The volume displacement resulting from the action, minus the original volume.
a battery causes a current of 2.0 A to flow through a lamp. the power used by the lamp is 12 watts. what is the voltage (i asked this before and never got the answer, i need the answer soon)
Answer: 6V
Explanation:
is wooden blocks transparent,translucent or opaque
Answer:
opaque
Explanation:
Materials such as wood, stone, and metals are opaque to visible light.
eating disorder Symptoms
Answer:
some symptoms can be lack of energy, and dizziness.
Explanation:
You are adding sugar to a cup of tea. What could you do to make the sugar dissolve
faster? (Select all that apply)
Stir/agitate
Heat the tea
Break the sugar into smaller parts
Keep adding more sugar
Answer:
Stir/agitate and heat the tea
Answer:
Stir the tea, Heat the tea, and Grind the sugar
Explanation:
Heating and stirring both increase the energy of the tea molecules, which increases interactions with the sugar. Grinding sugar allows more sugar molecules to be exposed to the solvent particles that dissolve them.
10. A jogger runs along a road for a distance of 2700 m. If it takes her 900 seconds
to run that distance, what is her speed?
Answer:
Speed = 3 m/s
Explanation:
Given the following data;
Distance = 2700m
Time = 900 s
To find the speed;
Speed can be defined as distance covered per unit time. Speed is a scalar quantity and as such it has magnitude but no direction.
Mathematically, speed is given by the formula;
[tex]Speed = \frac{distance}{time}[/tex]
Substituting into the equation, we have;
[tex]Speed = \frac{2700}{900}[/tex]
Speed = 3 m/s
What is the purpose of chloroplasts, and why do you think it is missing from the root hair cell?
Explanation:
Mitochondria are essential parts of many eukaryotes, but they are useless without oxygen. Therefore, chloroplasts are extremely important. They produce breathable air for life. Root hairs are seen to not have chloroplasts as their job is to collect water and nutrients.
BRAINILIEST PLEASEQuestion 4 of 25
Which statement correctly compares nuclear fission with nuclear fusion?
A. Nuclear fission forms a larger nucleus, and nuclear fusion forms
smaller nuclei.
B. Nuclear fission uses a common isotope, and nuclear fusion uses a
rare isotope.
C. Nuclear fission reactions demonstrate the conservation of atomic
number, and nuclear fusion reactions do not.
D. Both nuclear fission and nuclear fusion produce energy from
matter
Help please
Answer:
Both nuclear fission and nuclear fusion produce energy from
matter
:D
Both nuclear fission and nuclear fusion produce energy from matter is the statement correctly comparing nuclear fission with nuclear fusion.
What is nuclear fusion?The process by which two or more tiny nuclei unite to generate a bigger nucleus is known as a nuclear fusion reaction.
The more energy it takes to liberate an electron from a smaller atom. This is referred to as binding energy.
As a result, when two little nuclei fuse together, there is more binding energy than when two big nuclei fuse together.
For example, the fusion of two hydrogen atoms produces more energy than the fusion of one helium atom, and surplus energy is expelled into space upon binding.
Both nuclear fission and nuclear fusion produce energy from matter is the statement correctly comparing nuclear fission with nuclear fusion.
Hence option D is correct.
To learn more about nuclear fusion refer to the link;
https://brainly.com/question/14019172
HELP
Which type of wave interaction is shown in the photo?
A. Interference
B. Refraction
C. Reflection
D. Diffraction
Answer: the answer is c (think bc im on that too)
Explanation:
The interference is a type of wave interaction shown in the photo. Option A is correct.
What is the interference of waves?The result of two or more wave trains flowing in opposite directions on a crossing or coinciding pathways. This phenomenon is known as the interference of waves.
The effect is the sum of the individual wave amplitudes at each site where more than one wave is present.
When two wave pulses are traveling along a string toward each other. They meet and the phenomenon is occur known as interference.
The interference is a type of wave interaction shown in the photo
Hence option A is correct.
To learn more about the interference of waves refer to the link;
brainly.com/question/16098226
HELPPPP PLSSS I NEED HELP
Answer:
D. Pearl Harbor
Explanation:
Which of the following regions of the EM epxtrum has the highest
frequency?
1) x rays
2) microwaves
3) infrared light
4) ultraviolet light
Answer:
1) x rays
Explanation:
Honestly Gamma rays has the Highest frequency, but in your options, gamma rays is not among, so x rays has the highest frequency among your options.
by Manshow
Answer:
The answer is (X-rays)
number 1
Why do we need satellites?
(There is no science colum)
Answer:
Because they provide information about clouds, oceans, land and ice.
If the current in a wire which is placed perpendicular to a magnetic field increases the force on the wire
Answer:
The force on the wire increases
Explanation:
Since the force on the wire F = BILsinФ where B = magnetic field strength, I = current in wire, L= length of wire and Ф = angle between the magnetic field and the wire.
Given that the magnetic field and the wire are perpendicular, Ф = 90°
So, F = BILsin90° = BIL
Since B and L are constant, F ∝ I
So, if the current in the wire increases, the force on the wire also increases.
When a 6 Ω resistor is connected across the terminals of a 3 V battery, the number of coulombs passing through the resistor per second is
Answer:
Given that - R = 6 ohm
V = 3 volt
n = ?
so by ohms law , V = I X R
I = V \ R = 3 \ 6 = 0.5 A
we know that I = Q / T here t is 1 sec
Q = I X T = 0.5 X 1 = 0.5 C
By the law of quantization ,
Q = n x e
n = Q / e = 0.5 / 1.6 x 10 ^-19
n = 0.3125 x 10^19
hoped so u got the answer mark me as brainellist :)
Answer:
0.5/1.6×10^-19
Explanation:
formula for current is v
I R
3/6=0.5
charge if found by the product of current and time which is one second
0.5×1 =0.5
deficiency of n=no of charges×charge of electrons
0.5/1.6×10^-19
A 1.50 kg cart moves in a circular path of 1.30 m radius at a constant speed of 2.00 m/s. (a) Calculate the magnitude of the centripetal acceleration of the cart.
(b) Calculate the magnitude of the centripetal force on the cart.
(c) Calculate the coefficient of friction between the tires and the ground
(d) Describe the direction of the centripetal force.
Answer:
the answer is 1500 because of the internet
What is potential energy?
Answer:
energy that is stagnant and cannot be changed
Answer:
Potential energy is a form of mechanical energy in which an object is at rest or it's not moving
A motorbike accellerates from 15m/s to 25m/s in 15 seconds. How far does thew motrobike trsavel in this time?
Answer:
300 m.
Explanation:
From the question given above, the following data were obtained:
Initial velocity (u) = 15 m/s
Final velocity (v) = 25 m/s
Time (t) = 15 secs
Distance (s) =?
The distance travelled by the motorbike can be obtained as follow:
s = (u + v)t / 2
s = (15 + 25) × 15 / 2
s = 40 × 15 / 2
s = 600 / 2
s = 300 m
Thus, the distance travelled by the motorbike is 300 m.
IF ITS RIGHT YOU WILL GET 5 STARS AND A BRAINLY WITH A LIKE
Answer:
DNA IS SMALLEST
NUCLEUS IS BIGGEST
PLEASE MARK BAiniRINIiEST
How is a plant able to cycle matter through the processes of cellular respiration and photosynthesis?
The carbon cycle refers to the processes by which carbon in the biosphere is recycled. Photosynthesis sucks carbon dioxide out of the atmosphere, while cellular respiration releases it into the environment. Photosynthesis is the process by which solar energy reaches a plant and is converted into glucose.
How photosynthesis and cellular respiration are similar:
Photosynthesis is a method by which plants and other organisms transform light energy into chemical energy, which is then released to fuel the organism's metabolic activities through cellular respiration.
A mass of 3.6 kg oscillates on a horizontal spring with a spring constant of 160 N/m. When the mass passes the equilibrium point its speed is 5.2 m/s. d. What is the maximum displacement of the mass?
Answer:
x = 0.78 m = 78 cm
Explanation:
Applying the law of conservation of energy to the spring-mass system, we can write the following equation:
[tex]Kinetic\ Energy\ at\ Mean\ Position= Potential\ Energy\ at\ extreme\ position\\\frac{1}{2}mv^2 = \frac{1}{2}kx^2\\\\x^2 = \frac{mv^2}{k}\\\\x = \sqrt{\frac{mv^2}{k} }[/tex]
where,
x = maximum displacement = ?
m = mass = 3.6 kg
v = speed at mean position = 5.2 m/s
k = spring constant = 160 N/m
Therefore,
[tex]x = \sqrt{\frac{(3.6\ kg)(5.2\ m/s)^2}{160\ N/m} }\\\\[/tex]
x = 0.78 m = 78 cm
If a balloon has 12 electrons on its surface but also 13 protons, what
is the net charge on the balloon?
Answer:
q = 1
Explanation:
Given that,
No. of electrons = -12
No. of protons = 13
We need to find the net charge on the balloon. We know that net charge is equal to the sum of proton and the electrons such that,
Net charge = No. of electrons + no. of protons
= -12 + 13
= 1
So, the net charge is equal to 1.
Of the following metals, which one is the BEST conductor of electricity?
Iron
Steel
Aluminum
Silver
Silver
Take a look at the chart attached for most conductive
has anyone done this???i need the last questions for 1 and 2
Answer:
no i haven't done it
Explanation:
clean yo computer tho
how can we improve natural resources
Answer:
reduce, reuse, and recycle paper,plastic, electricity, glass, fiber
A 100 N force is applied to move an object a horizontal distance of 5 meters at constant speed in 10 seconds. How much power is done?
The power used when a 100 N force is applied to move an object through a distance of 5 m at constant speed in 10 seconds is 50 W
We'll begin by calculating the energy. This can be obtained as follow:
Force (F) = 100 N
Distance (s) = 5 m
Energy (E) =?E = F × s
E = 100 × 5
E = 500 JFinally, we shall determine the power. This can be obtained as follow:
Energy (E) = 500 J
Time (t) = 10 s
Power (P) =?[tex]P = \frac{E}{t}\\\\P = \frac{500}{10}[/tex]
P = 50 WTherefore, the power used in moving the object is 50 W.
Learn more:
https://brainly.com/question/24817638
A bucket is held up by a rope.
What force is pulling the bucket down?
O Force Gravity
O Force Tension
O Force Elastic
O Force Normal
Answer:
gravity...................
Answer:
Force GravityHope it help you
Which of these provides the best explanation for why the pencil appears broken?
A. The pencil absorbs all the light rays that hit it
B. Water reflects light rays away from the pencil
C. Light rays are bent by the water in the glass
D. The surface of the water reflects lights rays
C. Light rays are bent by the water in the glass.
Explanation:
The light defracts as is it leaves the medium of air and enters the medium of the water/glass.
The link below is to a short video that explains this concept very well.
https://youtu.be/Iq1a_KJTWJ8