Answer:
1) dependent
2) Experiment
3) Controlled variable
4) hypothesis
5) Inquiry
Explanation:
The dependent variables are those variables that change when the experimental or independent variable is being manipulated.
An experiment is a carefully designed study that tends to establish a cause and effect relationship between two or more variables.
A control variable is any variable which is held constant or unchanged throughout the course of the investigation(experiment).
Hypothesis is a precise statement which can be tested and predicts the outcome of the study.
The independent variable is the variable that is being manipulated.
The bat emits a sound wave with a frequency of 25.0 kHz and a wavelength of 0.0136
metres.
Calculate the speed of this sound wave.
Answer:
The calculation that you then need to do is 25000 x 0.0136 = 340. You must not forget the units of speed, which here are metres per second, or m/s. Your final answer is 340 m/s.
help would be greatly appreciated
How does an unbalanced force cause a change in direction of an object?
Answer:
Explanation:
The net force is in the same direction of the acceleration. Acceleration changes the speed of an object.
Imagine that I have a ping-pong ball and a bowling ball resting on the floor of our classroom. I go up to the bowling ball and give it a push so that it starts rolling. If I give a push of the exact same strength to the ping-pong ball, how will the resulting motion of the ping-pong ball be different
Answer:
the speed and aceleration of the ping pong ball is greater than that of the bowling ball.
Explanation:
We can analyze this exercise from several points of view, if we use Newton's second law
Bowling ball
F = M a₁
pingpongg ball
F = m a₂
as the forces the same
M a₁ = m a₂
a₂ = [tex]\frac{M}{m}[/tex] a₁
Since the mass of the bowling ball is much greater than the ping pong ball,
a₂ »a₁
so the acceleration of the ping pong ball is much greater than the acceleration of the bowling ball.
If we use the relationship of momentum and momentum, assuming that the time for the two cases is the same and that both start from rest
Bowling ball
I = F t = Δp
I = M (v₁ - v₀)
Ping pong ball
I = F t = Δp
I = m (v₂ -v₀)
the impulse itself
M v₁ = m v₂
v₂ = [tex]\frac{M }{ m}[/tex] v₁
so we conclude that the speed of the ping pong ball is much greater than the speed of the bowling ball.
In conclusion the speed and aceleration of the ping pong ball is greater than that of the bowling ball.
S
m
On a frictionless toy race track, a 0.035 kg toy car moving right at 0.30 collides with another 0.040 kg toy
m
car moving left at 0.20 After the collision, the 0.035 kg car moves left at 0.20
S
m
S
What is the final speed of the 0.040 kg toy car?
Answer: 0.24 m/s
Explanation:
A tennis player hit a .057-kg ball with a force of 40 N. The duration of the force was .05 s.
Two soccer players kick a soccer ball back and forth along a straight line. The first player kicks the ball 11 m to the right to the second player. The second player kicks the ball to the left weakly; it only moves 2.7 m before stopping. (Consider the right to be the positive direction. Where applicable, indicate the direction with the sign of your answer.)
(a) What is the total distance that the ball moved?
m
(b) At the end, what is the displacement of the ball (from the first player)?
m
Answer:
a) 13.7 m
b) 8.3 m
Explanation:
a)
The total distance traveled by the ball is just the sum of the distances traveled after being kicked by the first player (11 m.) plus the distance moved after being kicked by the second player (2.7 m), independent of the direction of the movement:[tex]d = d_{1} + d_{2} = 11.0 m + 2.7 m = 13.7 m (1)[/tex]
b)
The total displacement of the ball, is just the difference between the final and initial position, by definition.If we choose the origin to be in the place that the ball is kicked by the first player,[tex]x_{o} = 0 (2)[/tex]
The final position along the x-axis, is just the distance traveled to the right (11 m) minus the distance traveled to the left (considering the right to be the positive direction), 2.7 m:[tex]x_{f} = x_{1} - x_{2} = 11.0 m - 2.7 m = 8.3 m (3)[/tex]
⇒ Δx = xf - x₀ = 8.3 m - 0 m = 8.3 m
What are the two main ways in which chemical bonds are formed
Answer:
The two main types of bonds formed between atoms are ionic bonds and covalent bonds.
Explanation:
Hope this helped <3
PLEASE HURRY Take 40 points.please just look at the picture.
Answer:
It you get a sushi for work, for a party, then it leads to people being happy, as an independant variable
It is changing the molecular structure of a protein
Explanation:
Block A, mass 250 g , sits on top of block B, mass 2.0 kg . The coefficients of static and kinetic friction between blocks A and B are 0.34 and 0.23, respectively. Block B sits on a frictionless surface. What is the maximum horizontal force that can be applied to block B, without block A slipping
Answer:
F = 69.3 N
Explanation:
For this exercise we use Newton's second law, remembering that the static friction force increases up to a maximum value given by
fr = μ N
We define a reference system parallel to the floor
block B ( lower)
Y axis
N - W₁-W₂ = 0
N = W₂ + W₂
N = (M + m) g
X axis
F -fr = M a
for block A (upper)
X axis
fr = m a (2)
so that the blocks do not slide, the acceleration in both must be the same.
Let's solve the system by adding the two equations
F = (M + m) a (3)
a =[tex]\frac{F}{ M+m}[/tex]
the friction force has the formula
fr = μ N
fr = μ (M + m) g
let's calculate
fr = 0.34 (2.0 + 0.250) 9.8
fr = 7.7 N
we substitute in equation 2
fr = m a
a = fr / m
a = 7.7 / 0.250
a = 30.8 m / s²
we substitute in equation 3
F = (2.0 + 0.250) 30.8
F = 69.3 N
A 1.0 C charged object and a 2.0 C charged object are separated by 100 m. Where should a -1.0x10-3 C charged object be placed on a line between the positively charged objects so that the net electrical force exerted on the negatively charged object is zero
Answer:
x = 41.2 m
Explanation:
The electric force is a vector magnitude, so it must be added as vectors, remember that the force for charges of the same sign is repulsive and for charges of different sign it is negative.
In this case the fixed charges (q₁ and q₂) are positive and separated by a distance (d = 100m), the charge (q₃ = -1.0 10⁻³ C)) is negative so the forces are attractive, such as loads q₃ must be placed between the other two forces subtract
F = F₁₃ - F₂₃
let's write the expression for each force, let's set a reference frame on the charge q1
F₁₃ = [tex]k \frac{q_1 q_3}{x^2}[/tex]
F₂₃ = [tex]k \frac{q_2 q_3}{(d-x)^2}[/tex]
they ask us that the net force be zero
F = 0
0 = F₁₃ - F₂₃
F₁₃ = F₂₃
k \frac{q_1 q_3}{x^2} =k \frac{q_2 q_3}{(d-x)^2}
[tex]\frac{q_1}{x^2} = \frac{q_2}{(d-x)^2 }[/tex]q1 / x2 = q2 / (d-x) 2
(d-x)² = [tex]\frac{q_2}{q_1}[/tex] x²
we substitute
(100 - x)² = 2/1 x²
100- x = √2 x
100 = 2.41 x
x = 41.2 m
The resistivity of a material is 2x10-3Ωm. What is the conductivity\n
Answer:
Conductivity, [tex]\sigma=500\ (\Omega-m)^{-1}[/tex]
Explanation:
Given that,
The resistivity of a material, [tex]\rho=2\times 10^{-3}\ \Omega-m[/tex]
We need to find the conductivity of the material.
We know that the reciprocal of resistivity is called conductivity.
[tex]\sigma=\dfrac{1}{\rho}\\\\\sigma=\dfrac{1}{2\times 10^{-3}}\\\\\sigma=500\ (\Omega-m)^{-1}[/tex]
So, the conductivity of the material is [tex]500\ (\Omega-m)^{-1}[/tex].
diffraction of light is the __________ of light as it passes through the Edges of a barrier or a slit.
1, reflections
2, refraction
3,bending
4,absorbing
Answer:
3 bending
Explanation:
____made up of glucose and fructose and found in plants.
1.Xylose
2.Maltose
3.Lactose
4.Sucrose
Answer:
1.Lactose
I Hope its help for you
Have a good day
For each of the motions described below, determine the algebraic sign (+, -, or 0) of the velocity and acceleration of the object at the time specified. For all of the motions, the positive y axis is upward.Part A. An elevator is moving downward when someone presses the emergency stop button. The elevator comes to rest a short time later. Give the signs for the velocity and the acceleration of the elevator after the button has been pressed but before the elevator has stopped.Part B. A child throws a baseball directly upward. What are the signs of the velocity and acceleration of the ball immediately after the ball leaves the child's hand?Part C. A child throws a baseball directly upward. What are the signs of the velocity and acceleration of the ball at the very top of the ball's motion (i.e., the point of maximum height)?
Answer:
A. Velocity is negative (-)
Acceleration is positive,(+)
B. Velocity is positive. (+)
Acceleration is negative (-)
C. Velocity is zero (0).
Acceleration is negative (-)
Explanation:
The elevator is said to be moving downward, therefore, its motion is in the negative direction as the positive direction is upward in the y-axis. Velocity is negative (-)
As the elevator is making an emergency stop, it is decelerating. Deceleration is negative acceleration. However, since it occurs in the opposite direction, i.e. acceleration vector is pointing upward, acceleration is positive,(+)
The motion of the ball is in the upward direction, therefore the velocity is positive. (+)
The acceleration due to the force of gravity acts in the opposite direction to that of the ball, i.e. downwards, acceleration is negative (-)
At maximum height, the ball will stop moving, therefore, velocity is zero (0).
Since acceleration due to the force of gravity acts downward, the acceleration is negative (-)
Can I get help on this question I’m scared to get it wrong .
Identify the labeled parts in the figure.
i. Which of the labeled parts is a chemical symbol?
ii. Which of the labeled parts is a coefficient?
iii. Which of the labeled parts is the number of atoms of the element?
iv. Which of the labeled parts indicates that only one atom of the element is present in the substance?
Answer:
I. a, c, f and h
II. e
III. b, d, g and i
IV. i
Explanation:
I. Chemical symbols are simple abbreviations used to represent various elements or compound. They consist entire of alphabet.
For the diagram given above, the labelled parts which represent chemical symbol are: a, c, f and h
II. Coefficients are numbers written before the chemical symbol of elements or compound.
For the diagram given above, the labelled part which represent Coefficient is: e
III. Number of atoms of element present in a compound is simply obtained by taking note of the numbers written as subscript in the chemical formula of the compound.
For the diagram given above, the labelled part which represent the number of atoms of the element are: b, d, g and i
IV. When no number is written as subscript in the formula of the element in the compound, it means the element has just 1 atom in the compound.
For the diagram given above, the labelled part which indicates that only 1 atom of the element is present is: i
Answer:
i. a, c, f, h
ii. e
iii. b, d, g, i
iv. i
You are driving up a long, inclined road. After 1.50mi you notice that signs along the roadside indicate that your elevation has increased by 510ft . b) How far do you have to drive to gain an additional 110ft of elevation
Answer:
1.825 miles
Explanation:
Given that :
Distance driven = hypotenus = 1.5 miles
Elevation at distance of 1.5 miles = 510 feets
Converting miles to feets for the hypotenus :
1 mile = 5280 feets
1.5 miles = (5280 * 1.5) = 7920 feets
To obtain the angle of inclination :
Using Pythagoras rule :
Sinθ = opposite / hypotenus
θ = Sin^-1(510 / 7920)
θ = 3.692°
For an additional elevation of 110 ft ; new height = 110 + 510 = 620 feets
Distance driven, d =?
Sin 3.69 = (620 / d)
0.0643581 * d = 620
d = 620 / 0.0643581
d = 9633.5970 feets
Converting to feets :
9633.5970 / 5280 = 1.8245448
= 1.825 miles
Calculate the change in momentum of a ball has 35 kg mass and it changed its velocity from 3m/s to 6 m/s
please hellllpppppp
Answer:
105 kg.m/s
Explanation:
Formula for change in momentum is given as;
ΔP = m(v - u)
We are given;
Mass; m = 35 kg
Initial velocity; u = 3 m/s
Final velocity; v = 6 m/s
Thus;
ΔP = 35(6 - 3)
ΔP = 35 × 3
ΔP = 105 kg.m/s
A boat moves up and down as water waves pass under the boat. If the amplitude of the wave gets bigger, then
A)
the boat will rise up higher.
B)
the boat will not rise up as high.
C)
the boat will go up and down more often.
D)
the boat will continue to move the same way.
Answer: The Boat will rise
Explanation: Because high amplitude means high in heights.
A steel ball (mass = 50 grams) and a plastic ball of the same dimensions (mass = 10 grams) are dropped from the same height at the same time. Which of the following will occur? (ASSUME NO AIR RESISTANCE)
a. the plastic ball will hit the ground before the steel ball hits the ground
b. the steel ball will hit the ground before the plastic ball hits the ground
c. the steel ball and the plastic ball will hit the ground at the same time
Take 47 points. Hurry Someone save me just look the picture
Answer:
suppose buying pizza for a work party leads to positive morale and to the work being done in half the time. Pizza is the independent variable, Work speed is the dependent variable, The mediator, the middle man without which there would be no connection, is positive morale. Denaturation, in biology, the process of modifying the molecular structure of a protein. Denaturation involves the breaking of many of the weak linkages, or bonds (e.g., hydrogen bonds), within a protein molecule that is responsible for the highly ordered structure of the protein in its natural (native) state.
Explanation:
hope this helps have a good rest of your day :) ❤
Explanation:
HW1. For example, suppose buying pizza for a work party leads to positive morale and to the work being done in half the time. Pizza is the independent variable, Work speed is the dependent variable, The mediator, the middle man without which there would be no connection, is positive morale.
HW2. The word denature means to render food unpleasant or dangerous to consume, it is denatured by adding a substance known as a denaturant. Aversive agents—primarily bitterants and pungent agents—are used to produce an unpleasant flavor.
Hope It Helps U
Please Mark As Brainl
What is a measure of how much matter an object is made of?
Answer:
grams
Explanation:
What three factors determine the amount of potential energy in a object are ______,______,and ______.
Answer:
It should be Mass, Gravity and Height
Explanation:
4. Taylor Swift pushes Kanye West,
headfirst fearless, off a high dive with and
initial speed of 6m/s. If the platform is 20m
high, what is Kanye's impact velocity with
the water? (velocity and angle)
a star produces energy by? ( a p e x )
A. absorbing and releasing the matter of other stars.
B. rotating quickly on its axis.
C. reflecting energy from nearby stars.
D. creating helium from hydrogen in its core.
A star produces energy by creating helium from hydrogen in its core (option D).
How does a star produce energy?A star is a luminous celestial body, made up of plasma (particularly hydrogen and helium) and having a spherical shape.
Nuclear fusion is the energy-producing process in stars. The "proton-proton chain," a series of events that turns four hydrogen atoms into one helium atom, dominates this process for the majority of stars.
Nuclear fusion is the combining of the nuclei of small atoms to form the nuclei of larger ones, with a resulting release of large quantities of energy.
Hydrogen atoms fuse in the core of the star to form a helium atom, which generates the energy for the star.
Learn more about stars at: https://brainly.com/question/463927
#SPJ1
how many carbon (C) atoms are in a molecule of CH2O?
Answer:1 carbon atom
Explanation:AP3X
Answer:
1
Explanation:
2. What is the cheetah's speed for the first four seconds. She
Explanation:
Cheetahs can go from 0 to 60 miles per hour in just 3.4 seconds and reach a top speed of 70 miles per hour. While they are the fastest land animal in the world, they can only maintain their speed for only 20 to 30 seconds.
Can someone help me grasp the concept of solving this please
Answer:
Q= m × c × change in tempQ= 1000 cal/kg × C Q= (5kg) × (1000 ) × (100-13) Q= 435000Hence 4.35 × 10^5 Ask any questions!I also do quizzes and exams if your interested! Look at the equation. What detail is missing? 3 m/s2= (33 m/s - X)/30 S
Answer:
The starting velocity.
Explanation:
We must understand that this equation comes from the following equation of kinematics.
[tex]v_{f}=v_{o}+a*t[/tex]
where:
Vf = final velocity = 33 [m/s]
Vo = starting velocity [m/s]
a = acceleration = 3 [m/s²]
t = time = 30 [s]
So, these values can be assembly in the following way:
[tex]v_{f}=v_{o}+a*t\\a*t=v_{f}-v_{o}\\3=\frac{33-v_{o}}{30}[/tex]
Use g = 9.80 m/s2 (down]
1. What velocity does a freely falling object reach after 4.0 s if it starts from rest?
The velocity of the freely falling object reached after 4.0 s is equal to 39.2 m/s.
What is the equation of motion?A relation can be established between the velocity of the body and acceleration of the body when the body is moving along a straight line with uniform acceleration. The distance traveled by the body in a specific time has expressed a set of equations called equations of motion.
The first equation of motion can be expressed as follows:
v = u + at
Where u is the initial velocity, v is the final velocity and a is the acceleration and t is the time of the object.
Given, the acceleration of the falling object, g = 9.8 m/s²
The initial velocity of the object, u = 0, and the time = 4 sec
The velocity of the object after time, t = 4 sec.
v = (0) + (9.80)× (4)
v = 39.2 m/s
Therefore, the velocity of the falling object will be 39.2 m/s after 4 seconds.
Learn more about the equation of motion, here:
https://brainly.com/question/16782759
#SPJ2