Answer:
d = 96 meters
Explanation:
a = acceleration
t = time
d = distance
[tex]d = \frac{1}{2} \times a \times {t}^{2} [/tex]
[tex]d = \frac{1}{2} \times 3 \times {8}^{2} [/tex]
[tex]d = 96[/tex]
Even after the body stops moving in a collision, the internal organs are still moving.
Answer:
True
Explanation:
The bodies internal organs move around, even after a collision that may impact your skeletal system.
When a collision occurs and the body comes to a sudden stop, the internal organs can continue to move due to their inertia. Yes, that statement is generally true.
Inertia is the property of an object that resists changes in its state of motion. The internal organs of the body, such as the heart, lungs, liver, and others, are not directly attached to the skeletal structure and are instead supported by connective tissues and surrounded by fluids.
During a collision, the body experiences a rapid deceleration or change in velocity. While the external motion of the body may come to a stop, the internal organs, due to their inertia, continue to move forward momentarily until they are acted upon by internal forces. This phenomenon is known as "organ motion" or "organ inertia."
In situations where high-impact collisions occur, such as in car accidents or contact sports, the continued motion of internal organs can result in serious injuries, even when external signs of trauma may be minimal.
To know more about the moment of inertia:
https://brainly.com/question/30051108
#SPJ6
The closest star to our solar system is Alpha Centauri, which is 4.12 × 10^16 m away. How long would it take light from Alpha Centauri to reach our solar system if the speed of light is 3.00 × 10^8 m/s? (Provide an answer in both seconds and in years.)
(According to the textbook the answer is 4.35 years, i'm just not sure how to get there as I keep getting a different answer)
Time = (distance) / (speed)
Time = (4.12x10^16 m) / (3 x10^8 m/s)
Time = 1.37 x 10^8 seconds
Divide the seconds by 86,400 to get days. Then divide the days by 365 to get years.
Time = about 4.35 years
21. When air is blown into a balloon, it expands equally in all directions. The best explanation for this is (circle the correct answer): A - The gas molecules in the balloon are expanding B - Internal air pressure acts at right angles to the balloon surface. C - As more air is blown in, the temperature increases causing the balloon to expand.
Answer:
C
Explanation:
I would have said B but air pressure acts at ALL angles(directions). C makes sense because the increase in the temperature would cause the molecules to bounce off the walls of the balloon and each other which exerts pressure.
Answer:
C c hagwguawnjaahwbhanwbhsqn2nusbwvwf
Un cuerpo de masa m. Tiene una velocidad V. Si la masa del cuerpo se incrementa al triple de su valor original y la velocidad se mantiene constante en dirección y sentido, pero su módulo aumenta al cuádruplo de su valor original, en tal caso la razón entre el tamaño del momentum inicial P2 y el tamaño del momentum final P1 es:
Answer: El momento final es 12 veces el momento inicial.
Explanation:
El momento es definido como la cantidad de movimiento, y la ecuación es:
P1 = m*V
donde m es masa y V es velocidad
Si este es el momento inicial de nuestro objeto, y ahora la masa se triplica y la velocidad se cuadriplica (en modulo) el nuevo momento es:
P2 = (3*m)*(4*V) = 3*4*m*V = 12*m*V
Entonces la razón entre los momentos es:
P2/P1 = 12m*V/(m*V) = 12
A skateboarder rides swiftly up the edge of a bowl-shaped surface and leaps into the air. While in the air, the skateboarder flips upside and tosses the skateboard from hand to hand. The skateboarder then rides safely back down the bowl. During the time that the skateboarder and skateboard are not touching anything, one aspect of their motion that is constant is their total (or combined) [note: neglect any effects due to the air]
a. angular momentum.
b. angular velocity.
c. velocity.
d. momentum.
Answer:
Option(a) is the correct answer to the given question .
Explanation:
The main objective of the angular momentum is evaluating however much the rotational movement as well as the angular velocity in the entity does have.The angular momentum is measured in terms of [tex]kgm^{2 }\ / s[/tex].
In the given question the skateboarder rides quickly up the bottom of a bowl-shaped surface and climb into the air.it means it is rotational movement also it is not touching anything so it is angular momentum.All the other option is incorrect because it is not follows the given scenarioA proton moves perpendicular to a uniform magnetic field B at a speed of 2.30 107 m/s and experiences an acceleration of 1.70 1013 m/s2 in the positive x direction when its velocity is in the positive z direction. Determine the magnitude and direction of the field.
Answer:
Explanation:
Given the following :
Speed (V) = speed of 2.30×10^7 m/s
Acceleration (a) = 1.70×10^13 m/s^2
Using the right hand rule provided by Lorentz law:
B = F / qvSinΘ
Where B = magnitude of the magnetic field
v = speed of the particle
Θ = 90° (perpendicular to the field)
q = charge of the particle
SinΘ = sin90° = 1
Note F = ma
Therefore,
B = ma / qvSinΘ
Mass of proton = 1.67 × 10^-27
Charge = 1.6 × 10^-19 C
B = [(1.67 × 10^-27) × (1.70 × 10^13)] / (1.6 × 10^-19) × (2.30 × 10^7) × 1
B = 2.839 × 10^-14 / 3.68 × 10^-12
B = 0.7715 × 10^-2
B = 7.72 × 10^-3 T
2) Magnetic field will be in the negative y direction according to the right hand thumb rule.
Since Velocity is in the positive z- direction, acceleration in the positive x - direction, then magnetic field must be in the negative y-direction.
Can someone please help me with this ? Neon gas in a container was heated from 20°C to 120°C. It's new volume is 150ml. What was the original volume ?
Answer:
110 mL
Explanation:
Ideal gas law:
PV = nRT
Assuming the container isn't rigid, and the pressure is constant, then:
V/T = V/T
Plug in values (remember to use absolute temperature).
V / 293 K = 150 mL / 393 K
V = 110 mL
A transformer is used to light a lamp rated 40w, 240v from a 400v A.C supply. Calculate:
A. The ratio of the number of turns of the primary to the secondary coil.
B. Current drawn from the main circuit if the efficiency of the transformer is 90%.
Answer:1.81
(a) Explanation:the turn ratio= input voltage÷output voltage.
400÷220=1.81.
Don't know how to solve b part...
PLEASE HELP!!!! Look at the circuit diagram. What type of circuit is shown? A. Closed series circuit B. Closed parallel circuit C. Open parallel circuit D. Open series circuit
Answer:
A. Closed Series Circuit
Explanation:
Let's dissect the image. Just a heads up, I'm going to use a few of street/road analogies here. Think of the current as cars/people, the circuit path as streets/roads, and the resistors(in the bulbs) are like speed bumps.
We have arrows dictating the direction of the current caused by the battery. If the circuit were open, it'd be as though we had a gap in a road so that no cars/people could go through. But because we have a current, that indicates that the circuit is closed.Next there's the question of the whether the resistors are in series or parallel. In simple cases like this, ask yourself if the resistors are on the same "street" or not. By that I mean, can you follow one line of current without breaking off to a different path? Here, it looks like the two resistors/bulbs are in series because they are on the same path.So what you're looking at is a closed series circuit.
a child rides her bicycle in her level drive way. what form of energy does she possess A. Elastic B. Nuclear C. Potential D. Kinetic
Answer:
Kinetic Energy
Explanation:
Kinetic energy is energy due to motion.
Answer:
D
Explanation:
Elastic energy is energy stored in a object when there is a strain or compression on the object.
Nuclear energy is the energy found in the nucleus of an atom.
Potential energy is energy that an object stores because of its position to other objects.
Kinetic energy is the energy that an object has due to motion.
The child is riding her bicycle, therefore the child is in motion. So, the correct answer must be D. Kinetic energy
can all alpha beta and gamma radiation treat cancer
Answer:
No
Explanation:
Only a few of alpha beta and gamma radiation can treat cancer
Given the resistivities below, which matedal is best described as an insulator?
O A. 4.5 Ω•m
O B. 2.8 x 10-8 Ω•m
O c. 3.2 x 108 Ω•m
O D. 1.7 x 10-8 Ω•m
Answer:
C. 3.2 x 10^8 Ω•m
Explanation:
An insulator is a material that resists the flow of electricity.
In the given data the material with the highest resistivity is the best insulator
3.2 x 10^8 Ω•m
Imagine that you are sitting in a chamber with your back to one wall. An electron beam, moving horizontally from the front wall towards the back wall, is deflected by a strong magnetic field to your right side. What is the direction of the magnetic field? Name the rule used to find out the direction of magnetic field in this situation
Answer:
Flemmings' left hand rule and Downward direction
Explanation:
The person could able to determine the path of force by applying the left-hand rule of Fleming.
Via holding the thumb the forefinger and second finger at right angles for one other
The left-hand rule is applied in the electric motors
On the other hand, the right-hand rule is applied for electric generators.
So different hands are used for the different thing as there is a difference between the cause and effect
Therefore in this case there is a left hand rule used and the direction is downward
As a motorcycle takes a sharp turn, the type of motion that occurs is called _______________ motion.
Answer:
circular motion
Explanation:
As a motorcycle takes a sharp turn, the type of motion that occurs is called circular motion.
Circular motion is a movement of an object along a circular path. As this motorcycle makes the sharp turn, it is acted upon by a centripetal force which directs the motorcycle towards the center.
Therefore, circular motion is the correct answer to the question.
Answer:
Circular Motion
I NEEED HELP!!!!! Upon using Thomas Young’s double-slit experiment to obtain measurements, the following data were obtained. Use these data to determine the wavelength of light being used to create the interference pattern.
Do this using three different methods.
The angle to the eighth maximum is 1.12°.
The distance from the slits to the screen is 302.0 cm.
The distance from the central maximum to the fifth minimum is 3.33cm.
The distance between the slits is 0.000250 m
Answer:
The wavelength is approximately 611 nm
Explanation:
We can use the formula for the condition of maximum of interference given by:
[tex]d\,sin(\theta)=m\,\lambda\\(0.000250\,\,m)\,\,sin(1.12^o)=8\,\lambda\\\lambda=\frac{1}{8} \,(0.000250\,\,m)\,\,sin(1.12^o)\\\lambda \approx 610.8\,\,nm[/tex]
We can also use the formula for the distance from the central maximum to the 5th minimum by first finding the tangent of the angle to that fifth minimum:
[tex]tan(\theta)=\frac{y}{D}\\ tan(\theta)=\frac{0.0333}{3.02} =0.011026[/tex]
and now using it in the general formula for minimum:
[tex]d\,sin(\theta)\approx d\,tan(\theta)=(m-\frac{1}{2} )\,\lambda\\\lambda\approx 0.00025\,(0.011026)/(4.5)\,\,m\\\lambda\approx 612.55\,\,nm[/tex]
Answer:
The correct answer is [tex]6.1\times10^{-7}\:m[/tex]
Explanation:
The distance from the central maxima to 5th minimum is:
[tex]x_{5n}-x_{0} =3.33\:cm=0.033\:m[/tex]
The distance between the slits and the screen:
[tex]L = 302\:cm = 3.02\:m[/tex]
Distance between 2 slits: [tex]d = 0.00025\:m[/tex]
[tex](n-\frac{1}{2})\lambda=\frac{d(x_n)}{L}[/tex]
For fifth minima, n = 5... so we have:
[tex]x_{5n}=\frac{9\lambda L}{2d}[/tex]
For central maxima, n = 0... so we have:
[tex]x_{0}=\frac{n\lambda L}{d}=0[/tex]
So the distance from central maxima to 5th minimum is:
[tex]\frac{9\lambda \:L}{2d}-0=0.033[/tex] (Putting the values, we get):
[tex]\Rightarrow \lambda = 6.1\times 10^{-7}\:m[/tex]
Best Regards!
Moment of inertia describes Select one: a. How the mass of an extended object is distributed about a rotation axis. b. How a force can rotate an object. c. The average position of the mass in an extended object. d. The tendency of an object to move in a circular path. e. The tendency of an object to move in a straight line.
Answer: a. How the mass of an extended object is distributed about a rotation axis
Explanation: Moment of inertia is defined as the measure of the rotational inertia of a solid object, it is a quantity that defines the torque needed to reach a desired angular acceleration around a given rotation axis, and it depends mainly on the mass distribution of the object, so the correct answer is: "how the mass of an extended object is distributed about a rotation axis"
Danny lowers the sails on his boat. He paddles upstream at 19 km/hr. The current is still running downstream at 15 km/hr. What is the actual velocity of the boat?
Answer:
4 km/hr
Explanation:
The computation of the actual velocity is shown below:
Because the path of its paddles is opposed to the current direction, the real velocity can be determined by deducting the current velocity to its velocity while paddling
So, the actual velocity is
= Upstream - downstream
= 19 km/hr - 15 km/hr
= 4 km/hr
As we can see it is in positive, so it is an upstream direction
Answer:
since the direction of his paddles is opposite of the the direction of the current, so the actual velocity can be calculated by subtracting the velocity of current to to his velocity when paddling
v = 19 - 15
v = 4 since the answer is positive, then the direction is upstream
Explanation:
a student pushed a 100 N bicycle over a distance of 15 m in 5 s. calculate the power generated.
The catch in this one is: We don't know how much force the student used to push the bike.
It wasn't necessarily the 100N. That's just the weight of the bike. But you know that you can push a car, a wagon, or a bicycle hard, you can push it not so hard, you can give it a little push, you can give it a big push, you can push it strong, you can push it weak, you can push it medium. The harder you push, the more it'll accelerate, but it's completely up to you how hard you want to push. That's what's so great about wheels ! That's why they were such a great invention ! This is where I made my biggest mistake. This guy came into my store one day and said he's got this great invention, it's definitely going to take off, it'll be a winner for sure, he called it a "wheel". I looked at it, I turned it over and I looked on all sides. I thought it was too simple. I didn't know then it was elegant. I threw him out. I was so dumb. I could have invested money in that guy, today I would have probably more than a hundred dollars.
Anyway, can we figure out how much force the student used to push with ? Stay tuned:
-- The bike covered 15 meters in 5 seconds. Its average speed during the whole push was (15m/5s) = 3 meters/sec.
-- If the bike started out with no speed, and its average speed was 3 m/s, then it must have been moving at 6 m/s at the end of the push.
-- If its speed increased from zero to 6 m/s in 5 seconds, then its acceleration was (6m/s / 5 sec) = 1.2 m/s²
-- The bike's weight is 100N.
(mass) x (gravity) = 100N
Bikemass = (100N) / (9.8 m/s²)
Bikemass = 10.2 kilograms
-- F = m A
Force = (mass) x (acceleration)
Force = (10.2 kg) x (1.2 m/s²)
Force = 12.24 N
-- Work = (force) x (distance)
Work = (12.24 N) x (15 m)
Work = 183.67 Joules
-- Power = (work done) / (time to do the work)
Power = (183.67 joules) / (5 seconds)
Power = 36.73 watts
Jorge camina en línea recta por una plaza, cruzándola de forma diagonal, recorriendo 60 m en 3 min. A partir de esta situación, responde: a) ¿Cuál es la distancia que recorre? b) ¿Cuál es el módulo del desplazamiento? c) ¿Qué valor tendrá su rapidez y el módulo de su velocidad?
Answer:
a) d = 60m (distance)
b) D = 60m (displacement)
c) v = 20 m/min
d) |v| = 20 m/min
Explanation:
a) The distance traveled by Jorge is 60m
d = 60m
b) The module of the displacement D, is equal to the values of the distance d, because Jorge walked in a straight line.
D = d = 60m
c) The speed of Jorge is given by the following formula:
[tex]v=\frac{d}{t}[/tex]
d: distance = 60m
t: time of the walk = 3min
[tex]v=\frac{60m}{3min}=20\frac{m}{min}[/tex]
The speed is 20 m/min
The module of the Jorge's velocity is:
[tex]|v|=\frac{D}{t}[/tex]
D: displacement = d = 60m
t: time = 3 min
[tex]|v|=\frac{60m}{3min}=20\frac{m}{min}[/tex]
The module of Jorge's velocity is 20 m/min
Jorge recorre una distancia de 60 m en 3 min. Su desplazamiento de 60 m, lo hace con una rapidez, y módulo de su velocidad, de 20 m/min.
Jorge camina en linea recta por una plaza recorriendo 60 metros en 3 minutos (t).
La distancia recorrida (d) es 60 m.
Como se mueve en linea recta, el desplazamiento (D) coincide con la distancia recorrida, es decir, es de 60 m.
Podemos calcular la rapidez (s) de Jorge usando la siguiente fórmula.
[tex]s = \frac{d}{t} = \frac{60m}{3min} = 20m/min[/tex]
La rapidez es una magnitud escalar y coincide con el modulo de la velocidad, dado que la velocidad es vectorial.
Jorge recorre una distancia de 60 m en 3 min. Su desplazamiento de 60 m, lo hace con una rapidez, y módulo de su velocidad, de 20 m/min.
Aprende mas: https://brainly.com/question/24773606
the value of MA in the third class lever is alaways less than one,why
Answer:
It is always less than 1 because the load arm is always longer than effort arm.
Explanation:
In the formula, MA= effort divided by load which makes it less than 1.
This helps by reducing the applied force(effort). It is a speed multiplier.
Hope it helps.
coma Narrows Bridge across the Puget Sound collapsed. The bridge was a suspension bridge. The wind blowing through the narrows matched the natural frequency of the bridge. This resulted in a large movement of roadway, which eventually caused the bridge to fail. What characteristic of waves caused the bridge to collapse
Answer:
amplitude
Explanation:
Amplitude is the characteristic of waves which caused the bridge to collapse. Amplitude of a wave is the maximum amount of displacement of a particle occurs in the medium from its rest position. When the frequency of a wave reaches the natural frequency of the bridge, the oscillation of the bridge produce an amplitude where it causing the destruction of the bridge which is called Resonance. So we can say that amplitude is the characteristic of waves which is responsible for the collapse of the bridge.
Answer: C.interference, because constructive interference occurred when the wind frequency matched the natural frequency of the bridge
Explanation:
A lens with f= 20.0 cm creates a
virtual image at -37.5 cm (in front of
the lens). The object is 4.44 cm
tall. How tall is the image?
(Mind your minus signs.)
(Unit = cm)
Answer:
h ’= 12,768 cm
Explanation:
For this exercise let's use the constructor equation
1 / f = 1 / p + 1 / q
where f is the focal length, p the distance to the object and q the distance to the image
the magnification equation is
m = h '/ h = -q / p
let's find the distance to the object
1 / p = 1 / f- 1 / q
1 / p = 1/20 - 1 / (- 37.5)
1 / p = 0.076666
p = 13.04 cm
now let's use the magnification equation
h ’= - q / p h
let's calculate
h ’= - (-37.5) / 13.04 4.44
h ’= 12,768 cm
Answer:
12.8
Explanation:
got the answer from chegg. Correct for acellus.
Why is it that when I ask a physics question, literally NO ONE answers. Like I thought that this was a site where al answers were answers. Its so frustrating!!!!! I bet no one will look at this because it says physics.
Answer:
ooof mood
Explanation:
Answer:
i kinda like physics.
Explanation:
what would you do if you are caught on thunder storm
If caught outside in a thunderstorm, find a low spot away from trees, fences, and poles. If your skin tingles and hair stands on end, lightning is about to strike. Crouch down immediately, balancing on the balls of your feet, placing hands on knees with head between them.
I tryed
Answer: take shelter
Explanation: Because u don’t want to die
Dan's plant will require two shifts of skilled workers, seven days a week. As he does his research, he
will pay particular attention to
A. the labor market.
B. regulatory restrictions.
C. performance measures.
D. his target market.
Answer:
the labor market.
Explanation:
Dan's plant will require two shifts of skilled workers, seven days a week. As he does his research, he will pay particular attention to the labor market.
If the phase of the vibrating sources was changed so that they were vibrating completely out of phase, what effect would this have on the interference pattern?
Answer:
There would be complete destructive interference.
Explanation:
This is because since the waves are completely out of phase, the phase difference is half wavelength, that is the phase angle is 180°. The vibrating sources are 180° out of phase with each other.
Since this is the case, the crest of the one source meets the trough of the other, this causes the resultant vibrational wave to cancel out, thus producing a destructive interference pattern.
Since the vibrating sources are completely out of phase, every point they meet is completely out of phase, so the resultant interference pattern would produce a complete destructive interference pattern of no wave.
Study the scenario. The particles in some system are moving around quickly. A few minutes later, the particles are moving, on average, more slowly. How does this change in motion affect the temperature of the system? A. The temperature of the system did not change. The speed of the particles has no effect on the temperature, only the type of atom affects the temperature. B. The temperature of the system is higher now than it was initially. Slower moving particles result in a higher temperature for the system. C. The temperature of the system did not change. The speed of the particles does not affect temperature, the number of particles affects the temperature. D. The temperature of the system is lower now than it was initially. Faster moving particles result in a higher temperature for the system.
Answer:
The correct answer is option D.
Explanation:
With an increase in temperature, the particles increase kinetic energy and move quicker. The normal speed of the particles relies upon their mass just as the temperature – heavier particles move more gradually than lighter ones at a similar temperature.
The temperature increase in this system since the average kinetic energy of the particles increases and particles move quickly. And after some time the temperature of the system is lower now than it was initially.
Thus, the correct answer is option D.
The impact of the change in motion should be option D.
Impact on the temperature:In the case when there is an increase in temperature, the particles should increase kinetic energy and move faster. The normal speed of the particles believes their mass is like the temperature. The temperature rises in this system because the average kinetic energy of the particles should rised and particles move faster.
Learn more about energy here: https://brainly.com/question/6034042
What happens to a hockey puck when a net force of 5 N acts on it? a It accelerates. b It remains at rest. c It increases in mass. d It moves at a constant speed.
Answer:
I think it is A
Explanation:
1. Find the energy required to melt 255g of ice at 0°C into water at 0°C
Answer:
E = 85170 J (/ 85.2 kJ)
Explanation:
Take the latent heat of fusion of water be 334J / g.
From the equation E = ml,
E = energy required (unknown),
mass m = 255g,
latent heat of fusion l = 334J / g,
E = 255 x 334
E = 85170 J (/ 85.2 kJ)
An electron moving with a velocity of 5 × 104 m s -1 enters into a uniform electric field and acquires a uniform acceleration of 104 m s -2 in the direction of its initial motion. (i) Calculate the time in which the electron would acquire a velocity double of its initial velocity. (ii) How much distance the electron would cover in this tim
Answer:
(i) t = 5s
(ii) x = 3.75*10^5 m
Explanation:
(i) To calculate the time that the electron takes to reach twice the value of its initial velocity, you use the following formula:
[tex]v=v_o+at[/tex] (1)
vo: initial velocity of the electron = 5*10^4 m/s
v: final velocity of the electron = 2vo = 1*10^5 m/s
a: acceleration of the electron = 1*10^4 m/s^2
You solve the equation (1) for t, and replace the values of the parameters:
[tex]t=\frac{v-v_o}{a}=\frac{1*10^5m/s-5*10^4m/s}{1*10^4m/s^2}=5s[/tex]
The electron takes 5s to reach twice its initial velocity.
(ii) The distance traveled by the electron in such a time is:
[tex]x=v_ot+\frac{1}{2}at^2[/tex] (2)
you replace the values of the parameters in the equation (2):
[tex]x=(5*10^4m/s)(5s)+\frac{1}{2}(1*10^4m/s^2)(5s)^2\\\\x=3.75*10^5m[/tex]
The distance traveled by the electron is 3.75*10^3m/s