Answer:
It develops natural resources.
It works to eliminate poverty through development.
Describe how a student would use the circuit to take the readings necessary to determine the
resistance of resistor R.
Answer:
[tex]R = \frac{V}{A}[/tex]
Explanation:
See attachment for circuit
From the circuit, we have:
[tex]V = Voltage[/tex]
[tex]A = Current[/tex]
[tex]R = Resistance[/tex]
Resistance is calculated as:
[tex]R = \frac{V}{A}[/tex]
The steps are as follows:
Step 1: The student needs first to power on the circuit
Step 2: The student then take readings from both the ammeter (for current) and from the voltmeter (for voltage)
Step 3: Record new readings for current and voltage by adjusting the variable resistor
Step 4: Draw a voltage-current graph
Step 5: : Lastly, calculate the slope of the graph
The slope represents the resistance
what is the effect of divorce on females?
Answer:
Numerous studies have shown that the economic costs of divorce fall more heavily on women. After separation, women experience a sharper decline in household income and a greater poverty risk (Smock 1994; Smock and Manning
Answer:
sadness and stress...................
Cameron is standing on the edge of a 60 m high cliff. He horizontally throws a football
with an initial velocity of 10 m/s. How long does it take for the football to hit the
ground?
Answer:34.6 m/s
Explanation: It is asking how long meaning the answer is in time
The sides of a right triangle that has any given vector for the hypotenuse are called _____
A. Scalar
B. Component
C. Resultant
D. Vector
Answer:
They are the resultant vector.
39. What is the change in momentum for a 5,000 kg ship in
outer space that experiences no net force over a 1 hr
period?
Answer:
Change in momentum is zero.
Explanation:
The following data were obtained from the question:
Mass (m) = 5000 kg
Time (t) = 1 h
Net force (F) = 0
Change in momentum =?
Force = Rate of change of momentum
0 = change in momentum
Change in momentum = 0
We can see from the above illustration that the net force is zero. Thus, the change in momentum is also zero.
Albert Bandura emphasized the idea of __________, which is the belief one has in one’s own ability to succeed. A. operant conditioning B. determinism C. self-efficacy D. self-worth
Answer:
C
Explanation:
Albert Bandura emphasized the idea of Self efficacy which is the belief one has in one’s own ability to succeed.
What is Self efficacy?
A person's self-efficacy relates to their confidence in their ability to carry out the behaviors required to achieve particular performance goals (Bandura, 1977, 1986, 1997).
The belief in one's capacity to exercise control over one's own motivation, behavior, and social environment is known as self-efficacy. The goals for which people strive, the amount of effort put out to obtain goals, and the possibility of achieving particular levels of behavioral performance are all influenced by these cognitive self-evaluations.
Self-efficacy beliefs, unlike conventional psychological notions, are anticipated to change according to the operating domain and the environment in which an action occurs.
Therefore, Albert Bandura emphasized the idea of Self efficacy which is the belief one has in one’s own ability to succeed.
To learn more about Self efficacy, refer to the link:
https://brainly.com/question/28215515
#SPJ6
a car with a mass of 2050 kg is traveling at 4.5 m/s. what is the cars momentum
Answer:
9225 kg m/s
Explanation:
momentum = mass * velocity
momentum = 2050 * 4.5
momentum = 9225
A rocket, with a mass of 5100 kg, has an engine that provides a net upward force of 8.0 x 10^5 N. It starts from rest and reaches a maximum speed of 900 m/s. How long does it take to reach that maximum velocity?
Answer:
5.7375 seconds
Explanation:
The computation of the time required to reach that maximum velocity is shown below:
Given that
Mass = m = 5100 kg
Net upward force F = 8 × times 10^5 N
Initial speed = V_i = 0
Maximum speed = V = 900 m.s
Based on the above information
Impluse J = m(V - V_i)
= 5100 (900 - 0)
= 459 × 10^4 kg m.s
As we know that
J = FT
So
T = J ÷ F
= (459 × 10^4) ÷ (8 × 10^5)
= 5.7375 seconds
A soccer ball was kicked over the edge of a wall and traveled 35 m horizontally at a speed of 5.6m/s. Calculate the vertical height of the wall.
Answer:
Are you sure it was soccer ball? Or meine hearts
Explanation:
A wave in the ocean has a wavelength of 2 m and a frequency of 0’5 Hz. What is the speed of this wave?
Answer:
the speed of the wave =1m/s
Which phrase describes velocity?
u
A. A quantity with direction only
B. A quantity with magnitude only
C. A quantity with no units
D. A quantity with magnitude and direction
SUBMI
You are designing a new roller-coaster. The main feature of this particular design is to be a vertical circular loop-the-loop where riders will feel like they are being squished into their seats even when they are in fact upside-down (at the top of the loop). The coaster starts at rest a height of 80m above the ground, speeds up as it descends to ground level, and then enters the loop which has a radius of 20m. Suppose a rider is sitting on a bathroom scale that initially reads W (when the coaster is horizontal and at rest). What will the scale read when the coaster is moving past the top of the loop
Answer:
The reading on the scale is N = 9W
Explanation:
Since the roller coaster drops from a height, h of 80 m, the potential energy lost equals the kinetic energy gained as it enters the loop.
So, mgh = 1/2mv² where m = mass of rider, g = acceleration due to gravity = 9.8 m/s², h = initial height of roller coaster above ground level = 80 m and v = speed of roller coaster as it enters the loop.
So, mgh = 1/2mv²
v² = 2gh
v = √(2gh)
v = √(2 × 9.8 m/s² × 80 m)
v = √(1568 m²/s²)
v = 39.6 m/s
Now, as the roller coaster gets to the top of the vertical loop, the centripetal force, F and the weight W acts downwards. For the passenger not to fall off, this must equal the normal force, N
So, F = mv²/r where v = speed of roller coaster = 39.6 m/s and r = radius of vertical loop = 20 m and m = mass of rider = W/g
F = Wv²/gr
F = W(39.6 m/s)²/(9.8 m/s² × 20 m)
F = (1568 m²/s²)W/196 m²/s²
F = 8W
Since F + W = N
8W + W = N
9W = N
So, N = 9W
So, the reading on the scale is N = 9W
A liquid fueled rocket is red on a test stand. The rocket nozzle has an exit diameter of 30 cm and the combustion gases leave the nozzle at a velocity of 3800 m/s and a pressure of 100 kPa, which is the same as the ambient pressure. The temperature of the gases in the combustion area is 2400 C. Find (a) the temperature of the gases at the nozzle exit plane, (b) the pressure in the combustion area, and (c) the thrust developed. Assume that the gases have a speci c heat ratio of 1.3, and a molar mass of 9. Assume that the ow in the nozzle is isentropic.
Answer:
1. Temperature= 869.35 K
2. Pressure of combustion = 12994.043 kpa
3. Thrust = 127x10⁶N
Explanation:
this problem has been fully explained in the attachment. please use it to get a clearer explanation of the answer.
1.
The temperature = (273+2400k) - (3800)²/2(4003)
= 2673 - 14440000/8006
= 2673 - 1803.65
= 869.35 K
Approximately 869.4K
2. We first get mach number
= 3800/√1.3(923.8)(869.35)
= 3800/1021.78
= 3.719
Pressure = 100kpa[1+2.07464415]^1.3/0.3
= 12995.043kpa
C. Thrust
Pi/4(3800)²(0.3)²(100x10³)/(923.8)(869.4)
= 12678.621
= 126.781 kN
Thrust is approximately 127kN = 127x10⁶N
A 450.0 kg roller coaster is traveling in a circle with radius 15.0m. Its speed at point A is 28.0m/s and its speed at point B is 14.0 m/s. At point A the cart is already moving with circular motion. a) Draw free bodydiagramsfor the cartatpointsAand B(two separate free body diagrams). b) Calculate the acceleration of the cartat pointsAandB(magnitude and direction). c) Calculate the magnitude of the normal force exerted by the trackson the cartat point A. d) Calculate the magnitude of the normal force exerted by the tracks on the cart at point B.
Answer:
b) a = 52.26 m / s², a ’= 13.06 m / s², c) N = 2.79 10⁴ N, d) N = 1.89 10³ N
Explanation:
a) In the attached we can see the free body diagrams for the two positions, position A in the lower part of the circle and position B in the upper part of the circle
b) Let's start at point A
Let's use that the acceleration is centripetal
a = v² / r
let's calculate
a = 28² / 15.0
a = 52.26 m / s²
as they relate it is centripetal it is directed towards the center of the circle, therefore for this point it is directed vertically upwards
Point B
a ’= 142/15
a ’= 13.06 m / s²
in this case the acceleration is vertical downwards
c) The values of the normal force
point A
let's use Newton's second law
∑ F = m a
N- W = m a
N = mg + ma
N = m (g + a)
N = 450.0 (9.8 + 52.25)
N = 2.79 10⁴ N
d) Point B
-N -W = m (-a)
N = ma -m g
N = m (a-g)
N = 450.0 (14.0 - 9.8)
N = 1.89 10³ N
4. Draw conclusions: What is the minimum energy required to break the egg?
.
Answer:
0.25 J
Explanation:
The strength of the egg shell, the size of the egg, and the force used to break it are just some of the variables that affect how much energy is needed to crack an egg. When an object hits the egg with an impact energy of 12–26 mJ, cracks occur.
What is energy?The capacity of a system or object to do work is called energy, which is a fundamental term in physics. Kinetic energy, potential energy, heat energy, electromagnetic energy, and nuclear energy are just a few of the different forms of energy.
While potential energy is the energy possessed by an object as a result of its position or position, kinetic energy is the energy of motion. While electromagnetic energy is energy carried by electromagnetic waves like light, thermal energy is energy related to the temperature of a substance. The energy stored in the nucleus of an atom is called nuclear energy.
Therefore, when an object hits the egg with an impact energy of 12–26 mJ, cracks occur.
Learn more about Energy, here:
https://brainly.com/question/1932868
#SPJ2
A particle move in the xy plane so that its position vector r=bcosQi +bsinQj+ ctk, where b, Q and c are constants. show that the partial move with constant speed.
Answer:
The speed of this particle is constantly [tex]c[/tex].
Explanation:
Position vector of this particle at time [tex]t[/tex]:
[tex]\displaystyle \mathbf{r}(t) = b\, \cos(Q)\, \mathbf{i} + b\, \sin(Q) \, \mathbf{j} + c\, t\, \mathbf{k}[/tex].
Write [tex]\mathbf{r}(t)[/tex] as a column vector to distinguish between the components:
[tex]\mathbf{r}(t) = \begin{bmatrix}b\, \cos(Q) \\ b\, \sin(Q) \\ c\, t\end{bmatrix}[/tex].
Both [tex]b[/tex] and [tex]Q[/tex] are constants. Therefore, [tex]b\, \cos(Q)[/tex] and [tex]b \sin (Q)[/tex] would also be constants with respect to [tex]t[/tex]. Hence, [tex]\displaystyle \frac{d}{dt}[b\, \cos(Q)] = 0[/tex] and [tex]\displaystyle \frac{d}{dt}[b\, \sin(Q)] = 0[/tex].
Differentiate [tex]\mathbf{r}(t)[/tex] (component-wise) with respect to time [tex]t[/tex] to find the velocity vector of this particle at time [tex]t\![/tex]:
[tex]\begin{aligned}\mathbf{v}(t) &= \frac{\rm d}{{\rm d} t} [\mathbf{r}(t)] \\ &=\frac{\rm d}{{\rm d} t} \left(\begin{bmatrix}b\, \cos(Q) \\ b\, \sin(Q) \\ c\, t\end{bmatrix}\right) \\ &= \begin{bmatrix}\displaystyle \frac{d}{dt}[b\, \cos(Q)] \\[0.5em] \displaystyle \frac{d}{dt}[b\, \sin(Q)]\\[0.5em]\displaystyle \frac{d}{dt}[c \cdot t]\end{bmatrix} = \begin{bmatrix}0 \\ 0 \\ c\end{bmatrix}\end{aligned}[/tex].
The speed [tex]v[/tex] (a scalar) of a particle is the magnitude of its velocity :
[tex]\begin{aligned}v(t) &= \| \mathbf{v}(t) \| \\ &= \left\|\begin{bmatrix}0 \\ 0 \\ c\end{bmatrix}\right\| \\ &= \sqrt{0^2 + 0^2 + c^2} = c\end{aligned}[/tex].
Therefore, the speed of this particle is constantly [tex]c[/tex] (a constant.)
If you have a 0.125 kg lead piece at
20.0°C, how much heat must you
add to melt it? (Remember, you
must warm it to its melting point
first.)
Material
Lead
Melt Pt (°C)
327
L (1/kg)
2.32.104
Boil Pt (°C) Lv (1/kg)
1750 8.59.105
c (1/(kg*c)
128
(Unit = J)
Answer:
7,812 J
Explanation:
Using the relation:
Q = mcΔθ
Q = quantity of heat
C = specific heat capacity of lead
Δθ = temperature change (T2 - T1)
M = mass of substance
Q = mass * specific heat * Δθ
Q = 0.125kg * 128 * (327 – 20)
Q = 0.125 * 128 * 307
Q = 4912 J
For melting:
Q = mass * Hf
0.125 * (2.32 * 10^4)
= 2,900 J
Total = 4,912 J + 2,900 J = 7,812 J
Physical quantities are generally not purely numerical: They have a particular dimension or combination of dimensions associated with them. Thus, your height is not 74, but rather 74 inches, often expressed as 6 feet 2 inches. Although feet and inches are different units they have the same dimension--length.
Required:
a. Find the dimensions [V] of volume.
b. Find the dimensions [v] of speed.
Answer:
a, The dimension of volume is L³
b. The dimension of speed = L/T
Explanation:
The three fundamental quantities are Mass, Length and time. Other physical quantities are obtained from or derived from these three. These other quantities are known as derived quantities. The units of the fundamental quantities are Kilogram (kg) for Mass, meters for length, and second for time.
In the given question:
a. Volume = length * breadth * height
since breadth and height all measure length, the dimension of volume becomes:
volume = length * length * length = L³
Thus, the dimension of volume is L³
b. Speed, v = distance/time
Distance measures length, therefore, the dimension of speed will be:
Speed = length / time = L/T
Therefore, the dimension of speed = L/T
because there the sperm and eggs are combining together to produce
so thats why they look alike
Answer:
yes. that is how a baby is conceived.
Question 3 (5 points)
Yissel was going to be late to Mr. Scharff's science class. Just as the bell was about to ring. Vissel ran the last little bit of the hallway at 2.47
meters/second for 8 seconds to beat the bell. How far away was Yissel from Mr. Scharff's classroom when she started to run?
In the Styrofoam ball investigation, it is likely that the charges on the ball and rod are
?
A. the same
B. opposite
C. constantly changing.
Answer:
answer = opposite
they are not changing being in a place as being they-self
the same would not be true because its different then the Styrofoam and it could only be different and its make the most sense aswell.
Both ball and rod has opposite charges on their bodies because of presence of different charges on it.
What are the charges on ball and rod?In the Styrofoam ball investigation, it is likely that the charges on the ball and rod are opposite because Styrofoam ball is negatively charged due to the presence of electrons while on the other hand, the rod is positively charged because of lining of positive charges on the rod.
So we can conclude that both ball and rod has opposite charges on their bodies because of presence of different charges on it.
Learn more about charges here: https://brainly.com/question/25923373
#SPJ2
Imagin you have mixed together some sand and salt Based on the venn diagram this mixture would be placed where
Answer:
a
Explanation:
ajjkiikkkkkhglutfgkitfgghiiij
What is the Radiation left over from the big bang called?
Answer:
The Big Bang theory predicts that the early universe was a very hot place and that as it expands, the gas within it cools. Thus the universe should be filled with radiation that is literally the remnant heat left over from the Big Bang, called the “cosmic microwave background", or CMB.
Explanation:
The Big Bang theory suggest that the universe in early stage was at very hot place and which can be expanded, the gas within it cools. It is in an infinite universe and it has no edge.
What is big bang theory ?The Big Bang theory is a cosmological model which explain the existence of the observable universe from the earliest periods to the large-scale evolution.
The model describes the mechanism behind the universe expansion from an initial state of high density and temperature, it is very important concept as a lot of research is going on in this field to find out exactly how the universe began billions of years ago.
The universe began to cool down in order to allow the formation of particles become atoms after its initial phase of expansion, Primordial elements such as Hydrogen, Helium, and Lithium are condensed through gravity are formed early stars and galaxies.
For more details regarding big bang theory, visit:
https://brainly.com/question/1160650
#SPJ2
A spring with a constant of 76 N/m is extended by 0.9 m. How much energy is stored in the extended spring?
Answer:
[tex]E=30.78\ J[/tex]
Explanation:
The force constant of the spring, k = 76 N/m
The extension in the spring, x = 0.9 m
We need to find the energy is stored in the extended spring. The energy stored in the spring is given by :
[tex]E=\dfrac{1}{2}kx^2\\\\E=\dfrac{1}{2}\times 76\times (0.9)^2\\\\E=30.78\ J[/tex]
So, 30.78 J of energy is stored in the spring.
Which statement best compares potential and kinetic energy?
O Objects always have more potentiał energy than kinetic energy.
O Kinetic energy increases and potential energy decreases when the velocity of an object increases
O Only potential energy decreases when an object's height increases.
O Objects always have more kinetic energy than potential energy.
Answer:
Kinetic energy increases and potential energy decrease when velocity of an object increase.
Two objects are electrically charged. The net charge on one object is doubled.
Therefore, the electric force _____.
reverses
doubles
quadruples
divides
QUCIK!! SOMEONE PLEASE HELP! I’LL MARK BRAINLIEST!!
Answer:
A. v = √2gh
B. No! The final velocity does not depend on the mass of the car.
C. Yes! the final velocity depends on the steepness of the hill
D. 3.28 m/s
Explanation:
A. Determination of the final velocity.
½mv² = mgh
Cancel out m
½v² = gh
Cross multiply
v² = 2gh
Take the square root of both side
v = √2gh
B. Considering the formula obtained for the final velocity i.e
v = √2gh
We can see that there is no mass (m) in the formula.
Thus, the final velocity does not depend on the mass of the car.
C. Considering the formula obtained for the final velocity i.e
v = √2gh
We can see that there is height (h) in the formula.
Thus, the final velocity depends on the steepness of the hill
D. Determination of the final velocity.
Height (h) = 0.55 m
Acceleration due to gravity (g) = 9.8 m/s²
Velocity (v) =?
v = √2gh
v = √(2 × 9.8 × 0.55)
v = √10.78
v = 3.28 m/s
if a current of 5A flows for 2minutes, find the quantity of electricity transfered
An iron nail becomes a permanent magnet if it is
if you stroke it an iron nail with a bar magnet the nail will become a permanent or long lasting magnet.
Hope it's perfect for you.
Two charged point-like objects are located on the x-axis. The point-like object with charge q1 = 4.60 µC is located at x1 = 1.25 cm and the point-like object with charge q2 = −2.14 µC is located at x2 = −1.80 cm.
A) Determine the total electric potential (in V) at the origin.
B) Determine the total electric potential (in V) at the point with coordinates (0, 1.50 cm).
Answer:
a) the total electric potential is 2282000 V
b) the total electric potential (in V) at the point with coordinates (0, 1.50 cm) is 1330769.23 V
Explanation:
Given the data in the question and as illustrated in the image below;
a) Determine the total electric potential (in V) at the origin.
We know that; electric potential due to multiple charges is equal to sum of electric potentials due to individual charges
so
Electric potential at p in the diagram 1 below is;
Vp = V1 + V2
Vp = kq1/r1 + kq2/r2
we know that; Coulomb constant, k = 9 × 10⁹ C
q1 = 4.60 uC = 4.60 × 10⁻⁶ C
r1 = 1.25 cm = 0.0125 m
q2 = -2.06 uC = -2.06 × 10⁻⁶ C
location x2 = −1.80 cm; so r2 = 1.80 cm = 0.018 m
so we substitute
Vp = ( 9 × 10⁹ × 4.60 × 10⁻⁶/ 0.0125 ) + ( 9 × 10⁹ × -2.06 × 10⁻⁶ / 0.018 )
Vp = (3312000) + ( -1030000 )
Vp = 3312000 -1030000
Vp = 2282000 V
Therefore, the total electric potential is 2282000 V
b)
the total electric potential (in V) at the point with coordinates (0, 1.50 cm).
As illustrated in the second image;
r1² = 0.015² + 0.0125²
r1 = √[ 0.015² + 0.0125² ]
r1 = √0.00038125
r1 = 0.0195
Also
r2² = 0.015² + 0.018²
r2 = √[ 0.015² + 0.018² ]
r2 = √0.000549
r2 = 0.0234
Now, Electric Potential at P in the second image below will be;
Vp = V1 + V2
Vp = kq1/r1 + kq2/r2
we substitute
Vp = ( 9 × 10⁹ × 4.60 × 10⁻⁶/ 0.0195 ) + ( 9 × 10⁹ × -2.06 × 10⁻⁶ / 0.0234 )
Vp = 2123076.923 + ( -762962.962 )
Vp = 2123076.923 -792307.692
Vp = 1330769.23 V
Therefore, the total electric potential (in V) at the point with coordinates (0, 1.50 cm) is 1330769.23 V
a) The total electric potential is 2282000 V
b) The total electric potential (in V) at the point with coordinates (0, 1.50 cm) is 1330769.23 V
What is electric potential?The electric potential is defined as the amount of work energy needed to move a unit of electric charge from a reference point to a specific point in an electric field.
Given the data in the question and as illustrated in the image below;
a) Determine the total electric potential (in V) at the origin.
We know that; electric potential due to multiple charges is equal to sum of electric potentials due to individual charges
Electric potential at p in diagram 1 below is;
[tex]V_P=V_1+V_2[/tex]
[tex]Vp = \dfrac{kq_1}{r_1} + \dfrac{kq_2}{r_2}[/tex]
we know that; the Coulomb constant, k = 9 × 10⁹ C
q1 = 4.60 uC = 4.60 × 10⁻⁶ C
r1 = 1.25 cm = 0.0125 m
q2 = -2.06 uC = -2.06 × 10⁻⁶ C
location x2 = −1.80 cm; so r2 = 1.80 cm = 0.018 m
so we substitute
Vp = ( 9 × 10⁹ × 4.60 × 10⁻⁶/ 0.0125 ) + ( 9 × 10⁹ × -2.06 × 10⁻⁶ / 0.018 )
Vp = (3312000) + ( -1030000 )
Vp = 3312000 -1030000
Vp = 2282000 V
Therefore, the total electric potential is 2282000 V
b)The total electric potential (in V) at the point with coordinates (0, 1.50 cm).
As illustrated in the second image;
[tex]r_1^2=0.015^2+0.0125^2[/tex]
[tex]r_1 = \sqrt{[ 0.015^2 + 0.0125^2 ][/tex]
[tex]r_1 = \sqrt{0.00038125}[/tex]
[tex]r_1 = 0.0195[/tex]
Also
[tex]r_2^2 = 0.015^2 + 0.018^2[/tex]
[tex]r_2 = \sqrt{0.015^2 + 0.018^2}[/tex]
[tex]r_2 = \sqrt{0.000549[/tex]
[tex]r_2 = 0.0234[/tex]
Now, Electric Potential at P in the second image below will be;
Vp = V1 + V2
[tex]Vp = \dfrac{kq_1}{r_1} + \dfrac{kq_2}{r_2}[/tex]
we substitute
Vp = ( 9 × 10⁹ × 4.60 × 10⁻⁶/ 0.0195 ) + ( 9 × 10⁹ × -2.06 × 10⁻⁶ / 0.0234 )
Vp = 2123076.923 + ( -762962.962 )
Vp = 2123076.923 -792307.692
Vp = 1330769.23 V
Therefore, the total electric potential (in V) at the point with coordinates (0, 1.50 cm) is 1330769.23 V
To know more about electric potential follow
https://brainly.com/question/25923373