Answer:
[tex]M_{base}=0.0311M[/tex]
Explanation:
Hello there!
In this case, according to the given information, it turns out possible for us to solve for the molarity of the KOH solution by knowing this base react in a 1:1 mole ratio with nitric acid, HNO3; thus, we can write the following equation, as their moles are the same at the endpoint:
[tex]n_{acid}=n_{base}[/tex]
Which in terms of molarities and volumes is:
[tex]M_{acid}V_{acid}=M_{base}V_{base}[/tex]
Thus, we solve for the molarity of the base (KOH) to obtain:
[tex]M_{base}=\frac{M_{acid}V_{acid}}{V_{base}} \\\\M_{base}=\frac{4.60mL*0.1852M}{27.35mL}\\\\M_{base}=0.0311M[/tex]
Regards!
is A tomato smells rotten a chemical
reaction
Answer:
yup
Explanation:
because chemical change took place
the reaction cant be reversible
In the equation C H4 + O2 C O2 + H2 O, what are the products?
A) C H4 + H2 O
B) C O2 + H2 O
C) O2 C O2
D) C H4 + O2
Answer:
Option B clearly shows the Products of the reaction
What is the rate of diffusion of NO gas to CO gas?
Answer:
0.97
Explanation:
Let R₁ represent the rate of diffusion of NO.
Let R₂ represent the rate of diffusion of CO.
Molar mass of NO (M₁) = 14 + 16 = 30 g/mol
Molar mass of CO (M₂) = 12 + 16 = 28 g/mol
Thus, the rate of NO to CO can be obtained as follow:
R₁ /R₂ = √(M₂/M₁)
R₁ /R₂ = √(28/30)
R₁ /R₂ = √(28/30)
R₁ /R₂ = 0.97
R₁ : R₂ = 0.97
NO : CO = 0.97
Therefore, the rate of diffusion of NO to CO is 0.97
Please help me ASAP State 2 uses of a retort
stand according to Chemistry
Answer:
2 uses of retort stand:
Retorts are used for distillation experiments (such as organic distillations) and titrations (where they hold a burette). They are also used as supports in filtration.When a car uses a gallon of gas, how much carbon dioxide is emitted into the environment? I give branlyest
Answer:
19.5
Please tell me if wrong.
When a car uses a gallon of gas, 22.0 miles per gallon of carbon dioxide is emitted into the environment.
What happens when carbon dioxide is emitted?After being released into the atmosphere, carbon dioxide (CO₂) is initially quickly dispersed among the atmosphere, the upper ocean, and plants.
The sources of carbon dioxide emissions include both natural and human activities. Decomposition, oceanic discharge, and respiration are examples of natural sources.
The annual carbon dioxide emissions from a typical passenger automobile are around 4.6 metric tonnes. This estimates that the typical gasoline car on the road today gets roughly 22.0 miles per gallon of fuel and travels about 11,500 miles annually.
Thus, 22.0 miles per gallon of carbon dioxide is emitted into the environment.
To learn more about the carbon dioxide, follow the link;
https://brainly.com/question/3049557
#SPJ6
what physical and social systems are involved in the service industry
Answer:
Hey mate.....
Explanation:
This is ur answer........
For example, the communications industry includes all of the physical and social systems that produce books, newspapers, magazines, radio and television broadcasts, billboard advertisements, Internet websites, telephones, and telecommunications, such as the GPS.
Hope it helps!
Brainliest pls!
Follow me! :)
If a mineral has a mass of 20 and a volume of 4, What is its density?
Answer:
5 g/cm^3
Explanation:
Density of a substance= mass/ volume
Given:
volume = 4,
mass = 20
Assume volume is in cm^3
Mass is in "g"
Then substitute the values
Density of the substance=( 20/4)
= 5 g/cm^3
Another term for natural radioactive decay into another element is
Answer:
The process of unstable (or radioactive) atoms becomes stable by emitting radiation. This event over time is called radioactive decay. Alpha decay results in the loss of two protons and two neutrons from the nucleus
Answer:
radioactive disintegration
Explanation:
Conversion of solid state to liquid state is called fusion; what is meant by latent heat of fusion?
Answer:
Explanation:
Latent heat of fusion, also known as enthalpy of fusion, is the amount of energy that must be supplied to a solid substance (typically in the form of heat) in order to trigger a change in its physical state and convert it into a liquid (when the pressure of the environment is kept constant). For example, the latent heat of fusion of one kilogram of water, which is the amount of heat energy that must be supplied to convert 1 kg of ice without changing the temperature of the environment (which is kept at zero degrees celsius) is 333.55 kilojoules
The latent heat of fusion of a substance also accounts for the energy required to accommodate any increase in the volume of the substance post the change of its physical state. The temperature at which the substance undergoes the phase transition is called the melting point of the substance. Unless specified to be otherwise, the pressure of the environment (when expressing the latent heat of fusion of a substance) is always assumed to be 1 atmosphere of pressure (which is roughly equal to 101.325 kilopascals).
Where is glycogen stored? (choose all that apply)
muscles
bones
organs
skin
Pick the MAIN output form of energy.
A snail eating a carrot so the snail has energy to move.
Electrical Kinetic Energy
Motion Kinetic Energy
Chemical Potential Energy
Thermal Kinetic Energy
Motion Potential Energy
Nuclear Potential Energy
Answer:
Chemical Potential Ener
How do you think the human population has changed over time? What makes you say that?
Answer:The world population increased from 1 billion in 1800 to 7.7 billion today. The world population growth rate declined from 2.2% per year 50 years ago to 1.05% per year. Other relevant research: World population growth – This article is focusing on the history of population growth up to the present.
Explanation:
How many grams of NaCl are in 1.25 X 1024
molecules of Naci? Use one decimal place
Answer:
121.1g
Explanation:
First, we need to convert the number of molecules of NaCl to moles (n) by dividing by Avagadro number
That is, n = number of molecules ÷ 6.02 × 10²³
n = 1.25 X 10²⁴ ÷ 6.02 × 10²³
n = 1.25/6.02 × 10^ (24-23)
n = 0.207 × 10¹
n = 2.07moles
Using the formula; mole = mass ÷ molar mass
Molar mass of NaCl = 23 + 35.5 = 58.5g/mol
mass = molar mass × mole
mass = 58.5 × 2.07
mass = 121.1g
what is atom
what is atom
Answer:
An atom is a chemical substance which exist freely in nature without any reaction .
An ideal gas is contained in a cylinder with a volume of 5.0x102 mL at a temperature of 30°C and a pressure of 710. Torr. The gas is then compressed to a volume of 25 mL, and the temperature is raised to 820° C. What is the new pressure of the gas?
Answer:
51207 torr is the new pressure of the gas
Explanation:
We can solve this question using combined gas law that states:
P1V1T2 = P2V2T1
Where P is pressure, V volume and T absolute temperature of 1, initial state and 2, final state of the gas
Computing the values of the problem:
P1 = 710torr
V1 = 5.0x10²mL
T1 = 273.15 + 30°C = 303.15K
P2 = ?
V2 = 25mL
T2 = 273.15 + 820°C = 1093.15K
Replacing:
710torr*5.0x10²mL*1093.15K = P2*25mL*303.15K
3.881x10⁸torr*mL*K = P2 * 7.579x10³mL*K
P2 = 51207 torr is the new pressure of the gas
Can someone please explain this to me t,t
I could do the second part if i just understood the first-
Answer:
Theoretical 32.04 g
The precent yeild 87. 39 %
Explanation:
Mole of H2 = m/mw = 4/2 = 2 mol
From the equation
1 mol H2 --> 1/2 mol CH3OH
2 mol H2 -->??
So we have 1 mol Ch3oh
Mass of Ch3oh = mole *Mw = 1* 32.04
= 32.04g >>> the theoretically
For percent yeild = actual / theoretical * 100%
( 28.0/32.04) *100% =
87.93%
What are three advantages of renewable energy?
how many grams are in 3.0 moles of H2O
Answer:
18x3=54 gram
Explanation:
When you express molecular mass (in case of molecule)/atomic mass(in case of atom) in gram it will be equivalent to one mole. For example:
12 gram Carbon atom = 1 mole of Carbon atom = N number of Carbon atom
16 gram Oxygen atom= 1 mole of Oxygen atom = N number of Oxygen atom
32 gram Oxygen molecule (O2) = 1 mole of Oxygen molecule (O2) = N number of Oxygen molecule (O2)
similarly 1 mole of water is equivalent to molecular mass of water x 3 that is 18x3=54 gram. It would constitute 3N molecules of water.
N: Avogadro's number : 6.022140857 × 10^23
Describe the concept of using radioactive elements to establish an age for a fossil. Be sure to include how the parent and daughter elements are used in the determination of age. Answer in 1 paragraph.
Answer:
The nuclear decay of radioactive elements is a process that is a useful tool for determining the absolute age of fossils and rocks. It is used as a clock, in which daughter elements or isotopes converted from parent isotopes by decaying at a particular time.
Radioactive decay rates are constant and do not change over time. It is measured in half-life. A half-life is a time it takes half of a parent isotope to decay and converted into a stable daughter isotope. How many parent isotopes and daughter isotopes present in the fossil or their abundance can help in determining the age of fossil or rock.
HELP ASAP!!! #2 only please.
Answer:
friend me on here and imma send you the link Explanation:
Energy that is made from the power of moving water
a
b
ОООО
wind
hydroelectric
coal
с
d
biomass
Hydroelectric energy is produced.
Can the excess reactant control the percentage yield
Explanation:
when one reactants is in excess, there will always be some left over. The other reactants becomes limiting factor and controls show much of each product is produced.while using excess percentage yields this is at the expense of atom economy.
A physics experiment is conducted at a pressure of 14.0 kPa. What is this pressure in mmHg?
Answer:
18.4 mmHg. The answer is 18.4 mmHg.
2KOH + H2SO4 → K2SO4 + 2H20
What mass of water would be produced if 19.6g of KOH were reacted?
19.6 × ( 1 mol KOH / 56 grams KOH )
= 0.35 mol KOH
_________________________________
0.35 mol KOH ×( 2 mol H2O / 2 mol KOH )
= 0.35 mol H20
_________________________________
0.35 mol H2O × ( 18 g H2O / 1 mol H2O )
= 6.3 grams H2O
where do fossils live
The body system that transports molecules to and from all cells of the body
Answer:
El sistema cardiovascular tiene como función distribuir los nutrientes y el oxígeno a las células del cuerpo y recoger los desechos metabólicos para después eliminarlos en los riñones a través de la orina, y por el aire exhalado en los pulmones. El sistema cardiovascular comprende el corazón, que actúa como una bomba que mantiene el conjunto en funcionamiento, los vasos sanguíneos (arterias, venas y capilares), que son los conductos que transportan la sangre y, la sangre, que es el líquido fluido que contiene las células producidas por la maduración de las células madre de la médula
What is diffusion? How does the motion of gas molecules explain how a gas diffuses throughout a room?
Answer:
Diffusion in gases
Diffusion is driven by differences in concentration. When chemical substances such as perfume are let loose in a room, their particles mix with the particles of air. The particles of smelly gas are free to move quickly in all directions
Explanation:
hope this helps
plz help me solve this question is it A,B,C or D
Hydrochloric acid reacts with sodium hydroxide to form sodium chloride (the salt) and water. Sodium chloride is made up of Na+ cations from the base (NaOH) and Cl- anions from the acid (HCl). HCl+NaOH→H2O+NaCl.
A chemical lab has isolated a metallic element from a compound. The metal
is highly reactive by itself and reacts with chlorine in a 1 to 1 ratio. In which
group of the periodic table is this element most likely found?
O A. 18
B. 17
C. 1
D. 2
SUBMIT
Answer:
C. 1
Explanation:
Group 1 metals are highly reactive (such as Sodium) and form 1 to 1 ratio of ions with halogens (such as chlorine, bromine etc).
This happens because group 1 element can donate 1 valence electron to fulfill their octet rule and halogens can receive 1 valence electron to fulfill their octet.
An oxide of nitrogen contain its own volume of nitrogen
its vapour dentity is 22. Find the molecular formula
Of nitrogen Oxide
Answer:
NO2 is the molecular formula of nitrogen Oxide
Explanation:
Correct question
An oxide of nitrogen contain its own volume of nitrogen
its vapour dentity is 23. Find the molecular formula
Of nitrogen Oxide
Solution
As we know
Molecular Weight is equal to two times the vapour density
Hence, the molecular weight of Oxide of nitrogen is 2 * 22 = 44
Molecular weight of Oxide of nitrogen is the sum of atomic weight of nitrogen and oxygen
Molecular weight of Oxide of nitrogen = 14 + 16 *Y
14 + 16 *Y = 46
Y = 2
Hence, the formula is NO2