28. The mass of a steel building frame is 5500 kg. What power is used to raise it to a helght of 5.0 m If the work is done in 12.0 seconds?
Remember to include your data, equation, and work when solving this problem.

Answers

Answer 1

Answer:

2292W

Explanation:

Use the formula for energy first:

[tex]E=D*M[/tex]

Where E = Energy || D = Distance || M = Mass.

Solve that equation:

E = 5 * 5500    ==>     27500J

To find power, divide energy per time:

27500J / 12s =~  2292W

Did it in a rush, any problems message me


Related Questions

a 5 kg block is on a frictionless surface. A 15 N force is applied to the block in a direction parallel to the surface. what is the acceleration of the block?
A. 3 m/s^2
B. 10 m/s^2
C. 20 m/s^2
D. 75 m/s^2

Answers

Answer:

D 75

Explanation:

I'm pretty sure it's just 5x15=75

Answer:

the answer would be 3/s^2

Explanation:

because all u have to do is divide 15 by 5 and u would get 3

A blow-dryer and a vacuum cleaner each operate with a voltage of 120 V. The current rating of the blow-dryer is 14 A, while that of the vacuum cleaner is 4.2 A. Determine the power consumed by (a) the blow-dryer and (b) the vacuum cleaner. (c) Determine the ratio of the energy used by the blow-dryer in 16 minutes to the energy used by the vacuum cleaner in 43 minutes.

Answers

Answer:

The correct solution is:

(a) 1680 W

(b) 504 W

(c) 1.240

Explanation:

The given values are:

Voltage,

V = 120 V

Current of blow dryer,

I₁ = 14 A

Current of vacuum cleaner,

I₂ = 4.2 A

Time,

t₁ = 16 min

t₂ = 43 min

As we know,

⇒ [tex]Power (P) = VI[/tex]

(a)

For blow dryer:

⇒ [tex]P_1=V\times I_1[/tex]

        [tex]=120\times 14[/tex]

        [tex]=1680 \ W[/tex]

(b)

For Vacuum cleaner:

⇒ [tex]P_2=V\times I_2[/tex]

        [tex]=120\times 4.2[/tex]

        [tex]=504 \ W[/tex]

(c)

The ratio will be:

= [tex]\frac{Blow \ dryer \ energy}{Vacuum \ cleaner \ energy}[/tex]

= [tex]\frac{P_1\times t_1}{P_1\times t_2}[/tex]

= [tex]\frac{1680\times 16}{504\times 43}[/tex]

= [tex]\frac{26880}{21672}[/tex]

= [tex]1.240[/tex]

difference between acceleration due to gravity and gravity​

Answers

Answer:

The gravitational force between earth and any object is known as gravity.

...

What would happen to the distance between the bright fringes produced by a diffraction grating if the entire interference apparatus (light source, grating, and screen) were immersed in water

Answers

Answer:

Since the wavelength would be reduced by the factor of N where N is the index of refraction, fringes would be be closer to one another.

(Similar to the difference of fringes of red light and blue light.)

What is the period of a sound wave with a frequency of 20Hz?

Answers

Answer is 0.05

Explanation

Mark was traveling at 40 mph on a road with a drag factor of 0.85. His brakes were working at B0o/o efficiency. To the nearest tenth of a foot, what would you expect the average length of the skid marks to be if he applied his brakes in order to come to an immediate stop

Answers

The average length of the skid marks to be if he applied his brakes in order to come to an immediate stop is 78.43 ft.

The given parameters:

Speed of Mark, v = 40 mphDrag factor, F = 0.85Working efficiency of the brake, n = 80%

The average length of the skid marks to be if he applied his brakes in order to come to an immediate stop is calculated as follows;

[tex]v = \sqrt{30 D fn} \\\\40 = \sqrt{30 \times D \times 0.85 \times 0.8} \\\\40 = \sqrt{20.4 D} \\\\40^2 = 20.4D\\\\1600 = 20.4 D\\\\D = \frac{1600}{20.4} \\\\D = 78.43 \ ft[/tex]

Thus, the average length of the skid marks to be if he applied his brakes in order to come to an immediate stop is 78.43 ft.

Learn more about length of a skid mark here: https://brainly.com/question/16914218

Electrical current is the flow of ____________
A) helium
B) protons
C) atoms
D) electrons

How much voltage is required to make 0.56 A flow through a 72-ohm resistance? [V = I x R]
A)48 V
B)36 V
C)40 V
D)52 V
WILL GIVE BRAINLIEST!!!

Answers

Solution :

A) Electric current is the flow of electrons .

B) We know, by ohm's law :

V = I × R

Putting given values in above equation, we get :

V = 0.56 × 72 V

V = 40.32 V

Hence, this is the required solution.

Solve for resistance. I do not get it. Pls help

Answers

Answer: I think a

Explanation:

Please hurry Describe why electric currents can be dangerous

Answers

Answer:

Cardiac Arrest, burns, and nerve damage.

Explanation:

Basically, the main risk is cardiac arrest, caused by the electric current interfering with the normal operation of the heart muscle. Other possible damages are burns due to the electric energy vaporizing the water inside the cells, and nerve damage caused by excessive current through the nerves.

Pea plant clones are given different amounts of water for a three-week period. The first pea plant receives 400 milliliters a day. The second pea plant receives 200 milliliters a day. The third pea plant receives 100 milliliters a day. The fourth pea plant does not receive any extra water: the plant only receives natural ways of receiving water. The heights of the pea plants are recorded daily.

IV ________________________________


DV_______________________________

Answers

Answer:

3

Explanation:

Electronic flash units for camera contain a capacitor for storing the energy used to produce the flash. In one such unit, the flash lasts for 1675s with an average light power output of 2.70 x 105 W . (a) If the conversion of electric energy to light is 95% efficient ( the rest of the energy goes to thermal energy), how much energy must be stored in the capacitor for one flash

Answers

Answer:

420J

Explanation:

Power is the time rate of change in energy. Power is the ratio of energy to time. The S.I unit of power is in watts.

Given that the flash lasts for 1/675 s, power output is 2.7 * 10⁵ W. Hence:

Power = Energy / time

Substituting:

2.7 * 10⁵ W = Energy / (1/675)

Energy = 2.7 * 10⁵ W * 1/675 = 400J

Therefore the energy emitted as light is 400J.

Since the conversion of electric energy to light is 95% efficient, hence the energy stored as electrical energy is:

Energy(capacitor) = 5% of 400J + 400J = 0.05*400 + 400

Energy(capacitor) = 420J

Describe how to determine the thickness of a sheet of a paper without a caliper.​

Answers

Answer:

Divide the total measurement of the stack/ream of paper by the number of sheets. For example: 2 inches/100 pages = 0.01-inches sheets.

In case you measured the stack, and it gave you less than an inch, then you need to do the same. For example: 0.5-inches/100 sheets = 0.005-inches per sheet.

Answer:

Divide the total measurement of the stack/ream of paper by the number of sheets. For example: 2 inches/100 pages = 0.01-inches sheets.

In case you measured the stack, and it gave you less than an inch, then you need to do the same. For example: 0.5-inches/100 sheets = 0.005-inches per sheet.

Explanation:

Which is a valid ionic compound?

sodide chlorine
sodium chlorine
sodium chloride
sodide chloride

Answers

Answer:

sodium chloride

Explanation:

Sodium chloride is an ionic compound. The ions of the sodium chloride compound is sodium ion and chloride ion.  The sodium ion is cation while the chloride ion is an anion. Sodium chloride is a very stable compound because of the mutual attraction of oppositely charged ions.

Pop up spring Lab
Describe the energy conversion that took place. What energy was present just before the jump? What energy is present at its maximum height? What happens in between?
Draw bar charts of energy before the jump, while the spring toy is compressed and after the jump at the maximum height of its jump. Be sure to label each type of energy.

Answers

Answer:

I honestly don't know but that thing looks cool lol

walk done in units time is called​

Answers

Answer:

Explanation:

work done per unit time is caleed power.it's SI unit is watt.it depends upon time.

What would make oppositely charged objects attract each other more?
increasing the positive charge of the positively charged object and increasing the negative charge of the
negatively charged object

decreasing the positive charge of the positively charged object and decreasing the negative charge of the
negatively charged object

increasing the distance between the positively charged object and the negatively charged object

maintaining the distance
tance between the positively charged object and the negatively charged object

Hurry I need answers quick I’m timed

Answers

Answer:

A). Increasing the positive charge of the positively charged object and increasing the negative charge of the negatively charged object.

Explanation:

The two objects possessing opposite or unlike charges attract one another due to the electromagnetic force between the electrons, as well as, protons in order to develop ionic lattices.

As per the question, the objects having unlike charges would attract one another more when we 'escalate the positive charge of the object having a positive charge and enhance the negative charge of the object possessing negative charge.' This will lead the atoms that are losing electrons to be positively(+ve) charged and the atoms gaining electrons to be negatively

(-ve) charged. Thus, the electromagnetic force among them increases and a stronger ionic network develops leading them to attract each other more. Hence, option A is the correct answer.

Answer:

The person above me is wrong the answer is actually B

Explanation:

I put his/her answer and got it wrong and it showed me theat the answer is b not a

Physicist ____ was found to have completely made up some of the data on which his astounding discoveries were made.

Answers

Answer:

Jan Hendrik Schön I believe


A skipper on a boat notices wave crests passing the anchor chain every 6.0 seconds. The skipper estimates the distance between crests at 30.0
m. What is the speed of the water waves?

Answers

Explanation:

given Time Period = 5 Sec

Amplitude = 1m, Wave length = 15 m

using time period = 1/ frequency , Frequency = 1/5 cycles per sec = 0.2 sec = 12 per min

wave speed= Frequency * Wave length

speed = 0.2*15 = 3m/s

A 15-watt bulb is connected to a circuit that has a total of 60. Ω of resistance. How many electrons are passing through that bulb every second?

Answers

Answer:

3.2075*10^16

Explanation:

Q=P/V just search up a converter and youll get 30V and so you do 15/30 which is a half and a single coulomb is 6.415*10^16 so you half it. I belive this is correct if you dont belive me wait for someone else smarter to answer and compare.

Which statement best describes the Sun Earth-Moon system?

Answers

Answer:

A

Explanation:

A. The Moon orbits the Earth, and the Earth-Moon system orbits the Sun

B. The Earth and Moon both orbit the Sun separately

C. The Sun orbits the Earth-Moon system

D. The Moon revolves around Earth but not the Sun

You are given two converging lenses to build a compound microscope. Lens A has focal length 0.50 cm and lens B has focal length of 3.0 cm. Which one of the two lenses would you use for the objective

Answers

Answer:

The lens to be used for the objective is lens A

Explanation:

The objective of a compound microscope

The focal length of the lens used for the objective = 1/(magnification obtained)

The focal length of most modern is equal to the tube length

The range of sizes for the focal length of a microscope is between 2 mm and 40 mm

Therefore, the appropriate lens to be used for the objective of the compound is lens A that has a focal length of 0.50 cm = 5 mm

HELP ME ASAP I WILL MARK YOU THE BRAINLIEST NO LINKS

Answers

Answer:

rolling friction is the lady in the forest

static friction is the man pushing the fridge

sliding friction is the snow kid

and fluid fraction is the bird I'm pretty sure

1. Static Friction
2. Sliding Friction
3. Fluid Friction
4. Rolling Friction

I don’t know if im fully correct, correct me if im wrong. Thanks!:)

I WILL MARK YOU THE BRAINLIEST NO LINKS
What type of friction is acting on the airplane?
sliding friction
static friction
fluid friction
rolling friction

Answers

Answer:

I believe it's sliding friction.

Explanation:

A 56.6-kg crate rests on a level floor at a shipping dock. The coefficients of static and kinetic friction are 0.517 and 0.260, respectively. What horizontal pushing force is required to (a) just start the crate moving and (b) slide the crate across the dock at a constant speed

Answers

Answer:

Explanation:

Magnitude of frictional force = μ mg

μ is either static or kinetic friction.

To start the crate moving , static friction is calculated .

a ) To start crate moving , force required = μ mg where μ is coefficient of static friction .

force required =.517 x 56.6  x 9.8 = 286.76  N .

b ) to  slide the crate across the dock at a constant speed , force required

= μ mg where μ is coefficient of kinetic  friction , where μ is kinetic friction

= .26 x 56.6  x 9.8 = 144.21 N .

In an electric circuit, 40 C of electric charge pass a point in 5.0 s.
What is the current in the circuit?
A 0.13A
B
8.0A
C 45A
D
200 A

Answers

Answer:

Explanation:

current=amount of charge/time taken

=40/5

=8 ampere(A)

The current flowing in the circuit is 8 A.

The correct answer to the question is Option B. 8 A.

Quantity of electricity, current and time are related by the following equation:

Q = It

Where

Q is the quality of electricity.

I is the current.

t is the time.

With the above formula, we can obtain the current in the circuit as illustrated below:

Quantity of electricity (Q) = 40 C

Time (t) = 5 s

Current (I) =?

Q = It

40 = I × 5

Divide both side by 5

I = 40 / 5

I = 8 A

Thus, the current in the circuit is 8 A.

The correct answer to the question is Option B. 8 A

Learn more: https://brainly.com/question/21690385

A spring with a spring constant of 2.5 N/m is stretched by 0.2 m. What is the potential energy in the spring

Answers

Answer:

Explanation:

PE = [tex]\frac{1}{2}k[/tex](Δ[tex]x^2[/tex])

where k is the spring constant and Δx is the displacement of the spring when an object is hung from it. Plugging in:

[tex]PE=\frac{1}{2}(2.5)(.2^2)[/tex] which gives us

PE = .05 J

A table is moved using 60 N of force.
How far is the table moved if 900 J of work is done on the table?
960 m
840 m
15 m
0.06 m

Answers

Answer:

15m

Explanation:

W=f×s

[tex]s = \frac{w}{f} \\ s = \frac{900j}{60n} \\ s = 15m [/tex]

The table moved "15 m".

Given:

Force,

F = 60 N

Work done,

W = 900 J

We know,

→ [tex]W = F\times s[/tex]

or,

→ [tex]s = \frac{W}{F}[/tex]

By putting the values, we get

      [tex]= \frac{900}{60}[/tex]

      [tex]= 15 \ m[/tex]

Thus the above response i.e., "Option c" is right.

Learn more about work done here:

https://brainly.com/question/8625856

G.P.E = weight (n) x height (m). 2 identical twins are skiing down 2 different slopes. one is 1000m high, the other is 1500 m high. the twin at 1000m weighs 150 N. the other twin weighs 100 N. which twin has the most P.E before they begin skiing?

Answers

Answer:

I don't know i really I'm sorry I wish I could help

Suppose that Joe and Jim are twins and :

________________________________

Joe :

Height = 1000 m

==》 PE = 150 × 1000

Weight = 150 N

==》 PE = 150,000 j

_________________________________

Jim :

Height = 1500 m

==》PE = 100 × 1500

Weight = 100 N

==》PE = 150,000 j

______________________________

As u can see Joe and Jim has equal PE before they begin skiing .

what is the power of a student that has done a work of 10 joules in 10 seconds​

Answers

Answer:

1 Watt

Explanation:

P=W/t

P=10/10

P=1 Watt

why doesn't the arrow fly forever

Answers

Because gravity pulls it down

Other Questions
Find the value of x. Please help why to write stories Find the ratio of the areas of two circles with radii 4 and 12 Suppose the length of each side of a square is increased by 5 feet. If the perimeter of the square is now 56 feet, what were the original side lengths of the square? A. 9 ft B. 11 ft C. 14 ft D. 36 ft A stock was priced [tex]$12 | 3/8[/tex] per share. It rose in price by [tex]$3 | 1/4[/tex] per share. What was its new price?A. [tex]$15 | 5/8\\[/tex]B. [tex]$9 | 1/4[/tex]C. [tex]$15 | 1/3[/tex]D. [tex]$9 | 1/8[/tex] Write an explicit formula for AN, the NTH term of the sequence 2, 4, 6 How does the graph of g(x) = x+ 5 compare with the graph of the parentfunction, f(x) = X?A. The graph of g(x) is compressed vertically by a factor of 5.B. The graph of g(x) is compressed horizontally by a factor of 5.C. The graph of g(x) is shifted 5 units up.D. The graph of g(x) is shifted 5 units to the right. How can data be calculated? What is Negotiation Strategies A gas at STP occupies 0.055 L of space. If the pressure changes to2.8 atm and the temperature increases to 195C, what is the newvolume? If h(x) = 6 X, what is the value of (hon (10)? O 4 -2 10 If p(x) = 2x2 - 4x and q(x) = x - 3, what is (pq)(x)? O 2x2 - 4x + 12 O 2x2 16x + 18 O 2x2 16x + 30 O 2x2 16x + 15 What part of the body breaks down food pieces to glue close or glue close pieces. (A. Stomach) ( B. Intestines) ( C. Mouth) The pastor divided the 3,000 circulars among 15 teenagers. How many circulars did each young person receive? (Write the explanation and answer) Consider an electron confined in a region of nuclear dimensions (about 5 fm). Find its minimumpossible kinetic energy in MeV. Treat this problem as one-dimensional, and use the relativistic relationbetweenEandp. Give your answer to 2 significant figures. (The large value you will find is a strongargument against the presence of electrons inside nuclei, since no known mechanism could contain anelectron with this much energy.) mr.lewis shared 3/4 of a loaf of bread equally aming her children what fraction of the whole loaf would 4 of her children recieve in total escreva na forma ax2+bx+c=0 as seguintes equaes do 2 grau Vista Company installed a standard cost system on January 1. Selected transactions for the month of January are as follows. 1. Purchased 18,400 units of raw materials on account at a cost of $3.90 per unit. Standard cost was $3.80 per unit. 2. Issued 18,400 units of raw materials for jobs that required 18,100 standard units of raw materials. 3. Incurred 16,000 actual hours of direct labor at an actual rate of $4.10 per hour. The standard rate is $4.60 per hour. (Credit Factory Wages Payable). 4. Performed 16,000 hours of direct labor on jobs when standard hours were 16,190. 5. Applied overhead to jobs at the rate of 100% of direct labor cost for standard hours allowed.Journalize the January transactions. Helpppppppppppppppppppp Which example best states an argument rather than an explanation? Jada wants to improve her word choice. Which word would best replace the word "moving" in her draft?1.shuddering 2.squirming3.standing 4.swiveling