2. A child swings back and forth on a swing with no friction or air resistance between points X and Z, as shown. Point Y is the lowest point in the swing, where height is zero. Which of the following is equal to the kinetic energy of the child at point Y?
(A) The kinetic energy of the child at point X.
(B) The kinetic energy of the child at point Z.
(C) The potential energy of the child at point Y.
(D) The potential energy of the child at point Z.

Answer:

7.7 m/s

Explanation:

Initial speed=2 m/s

mv=Ft

1*v=3*1.9

v=5.7 m/s

5.7+2=7.7

Answer:

nvjch

ffufuxuhxjcjfbfdhdh

Answer:

The tire fills up just like anything else that holds air when u pump a ball or tire up it fills all the way up cause it is a small confined space and after filling it with air the atoms of the air fill the tire up

Explanation:

Complete question is;

An experiment is carried out to measure the extension of a rubber band for different loads.

The results are shown in the image attached.

What figure is missing from the table?

Answer:

17.3 cm

Explanation:

The image attached showed values for load, extension and initial length.

Now, the first length there is 15.2 cm and as such it's corresponding extension is 0 because it has no preceding measured length.

The second measured length is 16.2 cm. Since it's initial measured length is 15.2 cm, then the extension has a formula; final length - initial length.

This gives: 16.2 - 15.2 = 1 cm

This corresponds to what is given in the table.

For the next measured length, it is blank but we are given the extension to be 2.1 cm. Now, since the initial measured length is 15.2 cm.

Thus;

2.1 cm = Final length - 15.2 cm

Final length = 15.2 + 2.1

Final length = 17.3 cm

Answer:

v=s/t

s=vt

t=s/v

t=(120×10‐³)/172.8

(the distance meters has been changed to kilometres)

t=1/1440 hrs

Given ,

Answer:

238.09 cm^3

Explanation:

V=mass/density

V=2500/10.5

V=238.09 cm^3

Line - A:  (15/10)  =  1.5 inch/second

Line - B:  (0/10)  =  0

Line - C:  (10/10)  =  1.0 inch/second

Line - D:  (-25/20)  =  -1.25 inch/second

Line-A represents the greatest speed.

Answer:

kinetic energy = 1 / 2 mv²

kinetic energy = 1 / 2 × 20 × 10 ²

kinetic energy = 1000 joules

.........

Answer:

i mean i think it is. we have no real pics of the earth they are all fake. And the moon landing was fake. the usa flag was blowing but there is no wind in space . its all fake

Explanation:

Answer: 20.4 m

Explanation: speed v upward is v = vo -gt.

When maximum height v = 0, vo -gt = 0 and

T = vo / g = 20 m/s / 9.81 m/s² = 2.04 s

Now height y = vot -0.5 gt^2 = 20,4 m

This is possible to solve using

Conservation of energy Ek= Ep

0.5mv² = mgh. And h = v²/2g. Results same

Answer:

I think is called Motion

but am not sure

Answer:

Maybe its displacement, I'm not sure?

Explanation:

Answer: The amplitude is 0. (assuming that the amplitude ot both initial waves is the same)

Explanation:

When two monochromatic light waves of the same wavelength and same amplitude undergo destructive interference, means that the peak of one of the waves coincides with the trough of the other, so the waves "cancel" each other in that point in space.

Then if two light waves undergo destructive interference, the amplitude of the resultant wave in that particular point is 0.

Answer:

No, the resulting wave in the diagram does not demonstrate destructive interference. The resulting wave in the diagram shows a bigger wave than Wave 1 or Wave 2. If it demonstrated destructive interference, it would be a smaller wave or a horizontal line. With destructive interference, waves break down to form a smaller wave, or cancel each other out, resulting in no wave formation.

Explanation:

edge

Answer:

given Power= 5.6×1000=5600watt

t=20min=20×60=1200sec. work done=?

P=w/t

w=pt=5600×1200=672×10^4Joule

The amount of work done by the motor is equal to 6.72 Megajoules.

Given the following data:

Conversion:

To determine the amount of work done by the motor:

Mathematically, the work done by an object with respect to power and time is given by the formula:

[tex]Work\;done = power \times time[/tex]

Substituting the given parameters into the formula, we have;

[tex]Work\;done = 5600 \times 1200[/tex]

Work done = 6,720,000 Joules

Note: 1,000,000 Joules = 1 Megajoules.

Work done = 6.72 Megajoules.

Read more on work done here: https://brainly.com/question/13818347

Answer:

[tex] {2 \times 10} - 7 = 12 {}^{2} \div x \\ x = 2 \times 10 - 7 \div 12 {}^{2} [/tex]

I'm just in jss2 but I read physics. this is what I think

Answer:

acceleration due to gravity: -9.8 m/s^2

Fg=mass of object*(-9.8)

Explanation:

This is a pretty vague question, but I'll answer as best I can.

All matter has gravity. YOU have gravity, although your gravitational pull is small. So, the force of attraction between the Earth and an object on Earth is modeled as

Force of gravity=(Gravitational constant*mass of object 1*mass of object  2)/distance between objects squared

Note that distance between an object on Earth and Earth is the radius of Earth (distance to Earth's core/center of mass)

Answer:

The velocity of the tuning fork sound is 317.4648 m/s

Explanation:

The given parameters are;

The frequency of the fork, f = 426.7 Hz

The length of the closed air column, L = 0.186 m

The diameter of the tube, d = 0.15 m

At the fundamental frequency in a closed tube, we have;

λ = 4·L

Where;

λ = The wavelength of the wave

L = The length of the tube

From the equation for the velocity of a wave, we have;

v = f·λ

Where;

v = The velocity of the (sound) wave

f = The frequency of the wave = 426.7 Hz

λ = 4·L = 4 × 0.186 m = 0.744 m

∴ v = 426.7 Hz × 0.744 m = 317.4648 m/s

Therefore, the velocity of the sound produced by the tuning fork, v = 317.4648 m/s

Answer:

The distance moved by the train is half the distance moved by the force

Explanation:

Given that the force applied to the smaller piston, F₂ = 4,000 N

The pressure in the area of the larger piston, A₁ = 2 × The pressure in the smaller piston, A₂

∴ A₁ = 2 × A₂

We have;

[tex]\dfrac{A_1}{A_2} = \dfrac{2\cdot A_2 }{A_2} =2 = \dfrac{F_1}{F_2}[/tex]

F₁ = 2·F₂ = 2 × 4,000 N = 8,000 N

F₁·d₁ = F₂·d₂

∴ 8,000 N ×d₁ = 4,000 N × d₂

d₁ = 1/2·d₂

∴ The distance moved by the train is half the distance moved by the force

Answer:

huh? I think it's Power.....

Answer:

i dont know

Explanation:

hello

Answer:

Joining a club and getting a hobby

Explanation:

Join a club if you want to meet people, and when they choose a hobby it should be more than just gardening, because gardening sucks in the long term and it doesn't fill that gap. I know because my grandma did it and she is still sad.

Answer:

Newton's First Law of Motion.

Explanation:

Newton's First Law of Motion states that a body continues its state of motion untill and unless an external force acts on it. Here, the truck moves forward even after the breaks are applied in order to maintain its State of motion.

Answer:

If F is a constant, we can take f = 1

f = m×a

ma = 1

therefore we can say that force is hence proportinal to the product of mass and acceleration.

Answer:

The answer would be 450 m kg/s

Explanation/ Explanation / Example:

Provided an object traveled 500 meters in 3 minutes , to calculate the average velocity you should take the following steps: Change minutes into seconds (so that the final result would be in meters per second). 3 minutes = 3 * 60 = 180 seconds , Divide the distance by time: velocity = 500 / 180 = 2.77 m/s .

If this doesn't help let me know!

Answer:

2400 km

Explanation:

30km for 1hr

Need up to 80 hrs , multiply both 80 and 30

So its 2400km

Choose the 2nd Option.....

Answer: 0.24 kg/m