Answer:
increase the voltage of the power source to create a higher current.
Explanation:
Using a battery with more voltage will also cause more current to pass through the wire which will increase the power of the electromagnet.
When metals bond with metals, the bond will be
Answer:
While ionic bonds join metals to nonmetals, and covalent bonds join nonmetals to nonmetals, metallic bonds are responsible for the bonding between metal atoms. In metallic bonds, the valence electrons from the s and p orbitals of the interacting metal atoms delocalize.
Explanation:
What element in group 1 is not considered an alkali metal?
A. Hydrogen (H)
B. Lithium (Li)
C. Potassium (K)
D. Cesium (Cs)
Answer:
A
Explanation:
Hydrogen isn't an alkali metal
Answer:
hydrogen
Explanation:
hydrogen is a gas not a metal
Which of the following is the BEST description of a budget? *
10
Answer:
A budget is an estimation of revenue and expenses over a specified future period of time and is usually compiled and re-evaluated on a periodic basis. Budgets can be made for a person, a group of people, a business, a government, or just about anything else that makes and spends money.
If I have 25 moles in a 3.0 M solution of HCI, how many liters do I have?
A weather balloon is inflated to a volume of 60.0 L at 22.0 °C and
1.2 atm. It is released into the air and is eventually found floating
over the Pacific Ocean, off the coast of Alaska, where standard
conditions exist (STP). Determine the new volume of the weather
balloon. NOTE: You must show your calculation on the attached
scratch paper, including
which of the Gas Law formulas you used. *
A. 46.3 L
B. 66.6 L
C. 77.8 L
D. O24.7L
(Please show your work)
Give an example to illustrate the difference between "paying more in taxes ” and paying a higher tax rate .
How much energy is contained in the six-cookie serving size recommended on the label?
Monounsaturated Fat 1g
Mixed Practice:
For questions 6-9, you may not have to use your entire flow chart. Decide where to start and end using your flow chart.
4NH3 + 5O2 → 4NO + 6H2O
MM NH3 = 17.04 g/mol; MM O2 = 32 g/mol; MM NO = 30.01 g/mol; MM H2O = 18.02 g/mol
In the above reaction, how many moles of NO are formed if 824 g of NH3 react?
27.5 mol
3510 mol
48.4 mol
774 mol
Given
Mass of NO - 824 g
Molar mass of NO - 30.01g/mol
No of moles of NO = Given mass/Molar mass
No of moles of NO = 824/30.01= 27.45 mole
Hence 27.5 moles of NO are formed!
A sample of gas has an initial pressure of 1.5 atm, an initial volume of 3.0 L, and an initial temperature of 293K. If the final pressure is 2.5 atm and the final
temperature is 303K, what will the final volume be?
Answer:
1.9 L
Explanation:
Step 1: Given data
Initial pressure (P₁): 1.5 atmInitial volume (V₁): 3.0 LInitial temperature (T₁): 293 KFinal pressure (P₂): 2.5 atmFinal volume (V₂): ?Final temperature (T₂): 303 KStep 2: Calculate the final volume of the gas
If we assume ideal behavior, we can calculate the final volume of the gas using the combined gas law.
P₁ × V₁ / T₁ = P₂ × V₂ / T₂
V₂ = P₁ × V₁ × T₂ / T₁ × P₂
V₂ = 1.5 atm × 3.0 L × 303 K / 293 K × 2.5 atm = 1.9 L
when aluminium and chlorine compared , which has smaller atomic size ? Why ?
aluminium has bigger atomic size than chlorine
because atomic radii decreases across the period and increases down the group
this law would hold owing to the fact that chlorine and aluminum are on the same period
A sample of sulfurous acid (H2SO3) has a mass of 1.31 g.
a) How many H+ ions are present?
b) How many SO32- ions are present?
c) What is the mass in grams of one formula unit of H2SO3?
Answer:
a) 2 (H+) ions
b) 1 (SO3²-) ions
c) 1.36 × 10^-22 grams.
Explanation:
According to this question, sulfurous acid has a chemical formula; H2SO3. It is made up of hydrogen and sulfite ion. Hydrogen ion (H+) is the cation while sulfite ion (SO32-) is the anion.
Based on the chemical formula, there are 2 moles of hydrogen ions that reacts with 1 mole of sulfite ion as follows:
2H+ + SO3²- → H2SO3
Hence;
- there are 2 hydrogen ions (2H+) present in H2SO3.
- there is 1 sulfite ion (SO3²-) present in H2SO3.
c) The mass of one formula unit of H2SO3 is calculated thus:
= 1.008 (2) + 32.065 + 15.999(3)
= 2.016 + 32.065 + 47.997
= 82.08 a.m.u
Since, 1 gram is = 6.02 x 10^23 a.m.u
82.08 a.m.u = 82.08/6.02 × 10^-23
= 13.6 × 10^-23
= 1.36 × 10^-22 grams.
A sample of a food label is shown below.
Example: Cereal Box
Calories per serving - 167
Total fat - 3 grams
Total saturated fat - 1 gram
Cholesterol - 0mg
Sodium - 250mg
Total carbs - 32 grams
Dietary fiber - 4 grams
Sugars - 11 grams
Protein - 3 grams
Servings per container 5
(a) Is the Calories per serving correctly written? Show your calculation.
(b) Calculate the percent from carbohydrates per serving.
(c) Calculate the Calories if you eat one box of the cereal.
Answer:
A) It's correctly written
B) 77%
C) 835 calories
Explanation:
A) From online sources, we have number of calories as follows;
Fats: 9 calories per gram
Protein; 4 calories per gram
Carbs; 4 calories per gram
Total calories for each;
Total fat = 3 × 9 = 27 calories
Total protein = 3 × 4 = 12 calories
Total carbs = 32 × 4 = 128 calories
(sugar and dietary Fibre are classified as carbohydrates and so total carbs takes care of their calories).
Thus, total number of calories per serving = 27 + 12 + 128 = 167 calories per serving which is same as what is given.
B) percent from carbohydrates per serving = total calories from carbs/total number of calories per serving × 100% = 128/167 × 100% ≈ 77%
C) One box contains 5 servings. Thus total number of calories per box = 167 × 5 = 835 calories
if you wanted to create 500g of calcium carbonate how much calcium chloride and sodium carbonate would you need?I need help please anyone. It's using stiochonometry and limiting reagent both or either one I don't know. But please help me
Mass of Calcium Carbonate = 500 grams
The required reaction would be:
CaCl₂ + Na₂CO₃ → CaCO₃ + 2NaCl
Number of moles of CaCO₃:
Number of moles = given mass / molar mass
Number of moles = 500 / 100 [molar mass of CaCO₃ = 100g/mol]
Number of moles = 5 moles
Using the power of stoichiometry!!!
CaCl₂ + Na₂CO₃ → CaCO₃ + 2NaCl
from the balanced reaction listed above, we can see that one mole of CaCl₂ and one mole of Na₂CO₃ produces one mole of CaCO₃
Moles of CaCl₂ = Moles of Na₂CO₃ = Moles of CaCO₃
we just solved for the number of moles of CaCO₃, which gives us
Moles of CaCl₂ = Moles of Na₂CO₃ = 5 moles
Hence, 5 moles of CaCl₂ and Na₂CO₃ each is required
In volcanic areas, groundwater heated by magma is a source of
a.
lava flows.
b.
silica.
c.
geothermal energy.
d.
pyroclastic flows.
Answer:I believe it is c.
Explanation:
Answer:
C., or "geothermal energy."
pls help i will mark brainliest Part D
Look back at your answer to part A. So far, you haven't added anything to the flask or removed
anything from it. Also, the contents of the flask have returned to the same temperature that they
were in part A. Considering the appearance of the solution in the flask, is the solution unsaturated,
saturated, or supersaturated? Explain your reasoning.
Answer:
Hello, Im Mack. Hope you're doing well. :)
Here is my Correct, custom answer for the lab Question, (I also took the same assignment and got a 100% score)
Explanation:
The heating of the sodium acetate solution made it change from super-saturated to un-saturated. Yet now that it cooled back to room temperature Im sure it is saturated. it wasn't able to disolve the excess sodium acetate left over at room temperature and had to be heated so now that it is back to room temperature I Think it will not disolve the sodium acetate left in the solution until it is heated again.
Hope this helped you out,
Please feel free to comment for further help, and I'll reply asap.
Have a great day my friend :)
What is the pH of .0003 M of NaOH
We are given that the concentration of NaOH is 0.0003 M and are asked to calculate the pH
We know that NaOH dissociates by the following reaction:
NaOH → Na⁺ + OH⁻
Which means that one mole of NaOH produces one mole of OH⁻ ion, which is what we care about since the pH is affected only by the concentration of H⁺ and OH⁻ ions
Now that we know that one mole of NaOH produces one mole of OH⁻, 0.0003M NaOH will produce 0.0003M OH⁻
Concentration of OH⁻ (also written as [OH⁻]) = 3 * 10⁻⁴
pOH of the solution:
pOH = -log[OH⁻] = -log(3 * 10⁻⁴)
pOH = -0.477 + 4
pOH = 3.523
pH of the solution:
We know that the sum of pH and pOH of a solution is 14
pH + pOH = 14
pH + 3.523 = 14 [subtracting 3.523 from both sides]
pH = 10.477
A particle that has the electron configuration 1s²2s²2p³ would:
Have 2 filled orbitals and 3 partially filled orbitals.
Be able to bond with 2 hydrogens.
Have an electron configuration of a noble gas.
Have the electron configuration of an alkali earth metal.
Answer:
Have 2 filled orbitals and 3 partially filled orbitals.
Explanation:
Hello there!
In this case, according to the given information of the electron configuration for that particle; it is possible for us to infer it has 5 valence electrons, as the electrons on its outermost shell (2). Moreover, we undertand this particle needs three bonds, does not have neither the electron configuration of a noble gas which ends by p⁶ nor that of an alkali earth metal as it ends by s².
Therefore, we infer the correct answer is Have 2 filled orbitals and 3 partially filled orbitals because according to the Hund's rule, the s orbital is fulfilled and the p orbital has 1 electron orbital fulfilled and two partially filled orbitals.
Regards!
What is sound? it is a form of energy produced by ____________.
A. conduction C. convection
B. radiation D. vibration
Answer:
D
Explanation:
sound is produced when the matter vibrates
Answer:
D
Explanation:
the sound that is made is basically energy. This energy we call it vibration
a cylinder is filled with 10. 0 L of gas and a piston is put into it. The initial preasure of the gas is measured to be 138 kPa. The piston is now pushed down compressing the gas until the gas has a final volume of 8.30 L calculate the final pressure of the gas be sure your answer has the correct number of significant digits.
Answer:
First you need to convert the cylinder to a boot, then you can successfully compress the water into the tip of the boot, preventing it from busting.
Explanation:
To convert a cylinder to a boot, simply multiply the circumference of the cylinder by 1.3125768927, or 1.31. The .31 is the extra space taken in by the tip of the boot.
How many grams of NiNi are formed from 55.3 g of Ni2O3?
2Ni2O3(s)⟶4Ni(s)+3O2(g)
Answer:
39.2 g
Explanation:
2Ni₂O₃(s) ⟶ 4Ni(s) + 3O₂(g)
First we convert 55.3 g of Ni₂O₃ into moles, using its molar mass:
55.3 g ÷ 165.39 g/mol = 0.334 mol Ni₂O₃
Then we convert 0.334 Ni₂O₃ moles into Ni moles, using the stoichiometric coefficients of the balanced reaction:
0.334 mol Ni₂O₃ * [tex]\frac{4molNi}{2molNi_2O_3}[/tex] = 0.668 mol Ni
Finally we convert 0.668 Ni moles into grams, using its molar mass:
0.668 mol * 58.69 g/mol = 39.2 g
Which is the best description of a cyclone?
a dust storm
rapidly changing weather in an area
a type of tornado
an area of low air pressure
Which 2 minerals are present in mafic igneous rock but not found
in felsic igneous rocks?
Answer: Mafic rocks are dominated by plagioclase and pyroxene (even if you can't see them with the naked eye) and smaller amounts of olivine. Intermediate rocks are roughly even mixtures of felsic minerals (mainly plagioclase) and mafic minerals (mainly hornblende, pyroxene, and/or biotite). There is little or no quartz.
HOPE THIS HELPS
A 200-g sample of a metal absorbs 3,080 J as it is heated from 20°C to 60°C. What is the identity of the sample?
A. Iron
B. Aluminum
C. Gold
D. copper
The identity of the sample is copper. The correct option is D. copper
To determine the identity of the sample, we will determine its specific heat, c.
From the formula
Q = mcΔT
Where Q is the quantity of heat
m is the mass
c is the specific heat of the substance
and ΔT is the change in temperature
From the given information
Q = 3080 J
m = 200 g
ΔT = T₂ - T₁ = 60°C - 20°C = 40°C
Putting the parameters into the formula, we get
3080 = 200 × c × 40
3080 = 8000c
∴ c = 3080 ÷ 8000
c = 0.385 J / g°C
From specific heat table, the substance that has a specific heat of 0.385 J / g°C is Copper.
Hence, the identity of the sample is copper. The correct option is D. copper
Learn more here: https://brainly.com/question/13439286
Which of the following has the greatest mass? (1pt)
A)5 moles of Sodium (Na)
B)5 moles of Phosphorus (P)
C)5 moles of Argon (Ar)
D)They all have the same mass
Answer:
C) 5 moles of Argon (Ar)
Explanation:
5mol Na x 22.990g Na/ 1 mol Na = 114.95g Na
5mol P x 30.974g P/ 1 mol P = 154.87g P
5mol Ar x 39.948g Ar/ 1 mol Ar = 199.74g Ar
Therefore Ar has the greatesr mass.
Which of the following choices is NOT evidence for the recent changes in global climate?
O prairies giving way to deserts in Africa and the American West
more and longer heat waves
O a single, normal weather event like a hurricane
O coral reefs dying off
Answer: single, normal weather event like a hurricane
Explanation:
Climate change is variation in the average weather conditions. This brings about a wetter, drier or warmer condition. Climate change is typically caused by human activities.
Some of the recent changes in global climate include prairies giving way to deserts in Africa and the American West, more and longer heat waves and coral reefs dying off.
It should be noted that a single, normal weather event like a hurricane isn't a result of climate change.
describe in detail the modern model of the atom?
Answer:
Atoms have protons and neutrons in the center, making the nucleus, while the electrons orbit the nucleus. The modern atomic theory states that atoms of one element has its own characteristics atomic number.
Please help I need the answer now!!!
Answer:
The answer is A: (more below)
Liquid A: Neutral
Liquid B: Acid
Liquid C: Base
Explanation:
Ph scale: 1 - 6 are acids, 7 is neutral, 8 - 14 are bases.
14
13
12
11
10
9
8
7
6
5
4
3
2
1
What is the mass of 564 liters of oxygen in kilograms?
9.When two protons combine to form one nucleus, the result is one proton and one
neutron. How did the one proton become a neutron?
Answer:
josephmelichar
Explanation:
In the first step, 2 protons combine. In doing so one of the protons will convert into a neutron by losing a positron (positive electron) and a neutrino; this is also known as beta decay. This changes one of the protons (positive charge) into a neutron (neutral charge) and allows the two particles to combine.
NEED HELP ASAP PLEASE!
4 NH3(g) + 5 O2(g) --> 4 NO(g) + 6 H2O(g)
You need 16 moles of NO(g). How many moles of O2 do you need to start with?
Answer:
20 moles of o2
5 moles=4moles
?moles=16moles