Answer:
Temperature = 0.605°C
Total enthalpy at 300kpa = 545.2 kJ
Total enthalpy at 600kpa = 846.45 kJ.
Explanation:
Checking the table for 134a pressure table. It is given that the specific volume of saturated liquid and the specific volume of the saturated vapor of 280kpa is 0.0007699 m^3/kg and 0.072352 m^3/kg respectively.
Also, the specific volume of saturated liquid and the specific volume of the saturated vapor of 320kpa is 0.0007772 m^3/kg and 0.063604 m^3/kg respectively.
The first thing to do is to determine the value for the specific volume of saturated liquid.
At 300 kpa, the specific volume of saturated liquid,n is given below as;
300 - 280/ 320 - 280 = (n - 0.0007699)/ 0.0007772 - 0.0007699.
Therefore, n = specific volume of saturated liquid = 0.0007735 m^3/kg.
300 - 280/ 320 - 280 = n - 0.072352/ (0.063604 - 0.072352).
n = 0.0679 m^3/kg.
The second thing to do is to determine the value of the specific volume.
Specific volume = 14 × 10^-3/ 10 = 0.0014 m^3/kg.
Determine the enthalpy of the mixture,b(I). This is given below as;
300 - 280/ 320 - 280 = b(I) - 199.54/ (196.7 - 199.54).
b(I) = 198.125 kJ/Kg.
Hence, b = [ 300 - 280/ 320 - 280 = j - 50.18 / 55.16 - 50.18] + [ ( 0.0014 - 0.00077735) / 0.067978 - 0.00077735] × 198.125.
b = 54.517 KJ/Kg.
Total enthalpy = 10 × 54.517 = 545.17 kJ.
Temperature can be Determine as below;
300 - 280/ 320 - 280 = T + 1.25 / 2.46 - 1.25.
Temperature = 0.605°C.
Hence, at 600kpa, the total enthalpy = [81.51 + ( 0.0014 - 0.0008199/ 0.034295 - 0.0008199) × 180.90] × 10
Total enthalpy at 600kpa = 846.45 kJ.
What is the normal pH range of a Base?
Answer:
7.35 - 7.45
Explanation:
The pH scale ranges from 0 (strongly acidic) to 14 (strongly basic or alkaline). A pH of 7.0, in the middle of this scale, is neutral. Blood is normally slightly basic, with a normal pH range of about 7.35 to 7.45. Usually, the body maintains the pH of blood close to 7.40.
Hope this helps
Answer:
The normal pH range if a base is more than 7
Explanation:
Basideally the pH range goes from 0-14 in which
Acidic range is :0-7
Neutral :7
Base : 7 - 14
why it is necessary to rinse the pipette after washing with water
Answer:Because When you're cleaning your glassware, you use water to rinse it off. If the burette is not completely dry by the time you use it, the remaining traces of water on the inside will make your titrant more dilute and thereby change its concentration.Before a burette is used, it needs to be cleaned. During the cleaning process, usually, water is introduced into the burette. Be the water clean or not, if the burette is then used without rinsing it with the solution that it is going to be filled with, the result of that analytical exercise will not be precise and accurate. The reason is that water residue in the burette would dillute the solution when it's filled in the burette which would make it impossible to determine the exact concentration of the solution moved by the burette. By rinsing and re-rinsing the burette several times with the solution it is going to be filled with, residue water from the cleaning process would be successfully removed from the burette as are other leftover substances from the cleaning process.
hope this helps have a nice night ❤️❤️❤️
Explanation:
Is CaO binary or polyatomic?
Answer:
It is going to be binary
Explanation:
How do you name ethers in chemistry?
Answer:
Common names of ethers simply give the names of the two alkyl groups bonded to oxygen and add the word ether. The current practice is to list the alkyl groups in alphabetical order (t-butyl methyl ether), but older names often list the alkyl groups in increasing order of size (methyl t-butyl ether).
Explanation:
Hope it is helpful.......
PLEASE HELP
How should this combustion reaction be balanced?
C5H3 + 02 → CO2 + H20
A. C5Hg + 502 → 5C02 + H20
B. C5Hg + 702 → 5C02 + 4H20
O C. C5H3 + 3.502 → 5C02 + 8H20
D. C5Hg + 302 → CO2 + 4H20
Answer:
B
Explanation:
All elements on both sides of the equation have the same amount of moles
Early chemists, known at the time as alchemists, had a difficult time understanding the Law of Conservation of Mass. Using the burning of wood as an example, what property of matter made this law difficult for early scientists to understand?
The law of conservation of mass states that, for any isolated system, the mass can neither be created nor be destroyed
After burning a log, the remains that are left behind after it burns are lesser than what would initially seem. There is a difference in mass before the burning of the log after the burning of the log. This seems like a violation of the law of conservation of mass, which would have made it difficult for early chemists to understand it. But if we consider the surroundings as a system then we can see that the mass that is lost in burning is actually converted into smoke and energy or forming other forms of substances. Then considering the whole system we can see that the mass and energy are conserved and interrelated.learn more about conservation of mass and energy:
https://brainly.com/question/13971039
How to frick a chicken...
Answer:uhhhhh should I be concerned
Explanation:
Answer:
hmmm o_O Maybe you... shouldnt
explain how liquid can enter the gas phase without reaching its boiling point
There is a 2 percent defect rate at a specific point in a production process. If an inspector is placed at this point, all the defects can be detected and eliminated. The inspector would cost $10 per hour and could inspect units in the process at the current production rate of 48 per hour.
If no inspector is hired and defects are allowed to pass this point, there is a cost of $11 per defective unit to correct the defects later on.
Assume that the line will operate at the same rate (i.e., the current production rate) regardless of whether the inspector is hired or not.
a. If an inspector is hired, what will be the inspection cost per unit? (Round your answer to 3 decimal places.)
Inspection cost per unit _____________$
b. If an inspector is not hired, what will be the defective cost per unit? (Round your answer to 3 decimal places.)
Defective cost per unit _____________$
c. Should an inspector be hired based on costs alone?
Answer:
A) $0.208 per unit
B) $0.220 per unit
C) An inspector should be hired
Explanation:
percentage of defect rate = 2% = 0.02
cost of inspector = $10 per hour
production rate = 48 per hour
cost of not hiring an inspector = $11
A) Determine the inspection cost per unit if an inspector is hired
= cost of inspector / production rate
= 10 / 48 = $0.208 per unit
B) Determine the defective cost per unit if an Inspector is not hired
= cost of not hiring an inspector * percentage of defect rate
= 11 * 0.02
= $0.220 per unit
C) Inspection cost < defective cost i.e. $0.208 < $0.220 hence an inspector should be hired
An unknown compound contains only C , H , and O . Combustion of 5.90 g of this compound produced 11.8 g CO2 and 4.83 g H2O . What is the empirical formula of the unknown compound
Answer:
C₂H₄O
Explanation:
In a compound that contains Cabon, hydrogen and oxygen, the combustion produce CO₂ from the carbon, and H₂O from the hydrogens. Using the mass of the products we can solve the moles of Carbon and hydrogen. The empirical formula is the simplest whole-number of atoms present in a molecule.
Moles CO₂ = Moles C:
11.8g CO₂ * (1mol / 44g) = 0.268 moles CO₂ = 0.268 moles C * (12g/mol) =
3.216g C
Moles H₂O = 1/2 moles H:
4.83g H₂O * (1mol / 18g) = 0.268 moles H₂O * (2 mol H / 1 mol H₂O) =
0.537 mol H * (1g/mol) = 0.537g H
Mass O to find moles O:
5.90g Sample - 3.216g C - 0.537g H = 2.147g O * (1mol / 16g) = 0.134 moles O
Ratio of atoms -Dividing in 0.134 moles-:
C = 0.268mol C / 0.134 mol O = 2
H = 0.537mol H / 0.134 mol O = 4
O = 0.134mol O / 0.134 mol O = 1
Empirical formula is:
C₂H₄OHELP!!!! Which of the following substances is a major component in acid rain?
A) KOH
B) NH3
C) SO2
D) NaOH
Answer:
(C) SO2.
SO2 is known as sulfur dioxide.
The below information about acid rain and SO2’s involvement is from epa.gov:
“Acid rain results when sulfur dioxide (SO2) and nitrogen oxides (NOX) are emitted into the atmosphere and transported by wind and air currents. The SO2 and NOX react with water, oxygen and other chemicals to form sulfuric and nitric acids. These then mix with water and other materials before falling to the ground.”
Explanation:
An astronomer observes an asteroid in the solar system. He notes that the asteroid is three times farther from the Sun than Earth is.
How far away from the Sun is the asteroid in astronomical units?
1 AU
2 AU
3 AU
4 AU
helpppppppp
Answer:
3 AU
Explanation:
The distance from the Earth to the Sun is known as 1 AU, or 1 Astronomical Unit. If an asteroid is three times this distance, it is 3 AU away.
Please help, and if you could also give me a step by step that would be awesome!!
Answer:
4.4 g
Explanation:
Step 1: Write the balanced equation
Cu + 4 HNO₃ ⇒ Cu(NO₃)₂ + 2 NO₂ + 2 H₂O
Step 2: Calculate the moles corresponding to 3.2 L of NO₂ at STP
At standard temperature and pressure, 1 mole of NO₂ occupies 22.4 L.
3.2 L × 1 mol/22.4 L = 0.14 mol
Step 3: Calculate the moles of Cu needed to produce 0.14 moles of NO₂
The molar ratio of Cu to NO₂ is 1:2. The moles of Cu needed are 1/2 × 0.14 mol = 0.070 mol.
Step 4: Calculate the mass corresponding to 0.070 moles of Cu
The molar mass of Cu is 63.55 g/mol.
0.070 mol × 63.55 g/mol = 4.4 g
The Rock Cycle moves in a specific order. True or
False
Answer:
it is false
Explanation:
it goes in different ways not in order
a hypothesis is tested by ___.
a. proposing a theory
b. conducting an experiment
c. making further observations
d. talking with other scientists
Answer:
A.
Explanation:
because a theory is like a prediction and a prediction is like a hypothesis.
What causes lightning?
A. Build up of electric charges in the clouds
B. Flow of electric charges among clouds
C. Light energy created in the clouds
D. Reflection of light by the clouds
Answer:
B.
Explanation:
Not sure if this is correct if not sorry.
I would like to get some examples of Newtons 1st,2nd, and 3rd Law
Answer:
Explanation:
Newtons 1st law:
If you slide a hockey puck on ice, eventually it will stop, because of friction on the ice. It might also stop if a hockey player places their stick in front of it.
Newton's 2nd law:
If the mass of an object is 20 kg and it's acceleration is 5 m/s, the force acting upon it is (m*a or 20*5) 100 N.
Another example that proves that force is dependent upon mass is that if you were to move a car and a truck (that were both previously stationary) at the same speed, the car would take less force/effort to move than the truck.
Newton's 3rd law:
If a book on a table, the table is exerting a force on it that is equal and opposite to the force of gravity.
If two soccer balls of the same mass collide, one moving and one stationary, then they would both apply an equal and opposite force onto each other, causing the moving ball to stop and the previously stationary ball to move at the speed of the previously moving ball.
DIRECTION: Supply the missing information about the scientist listed in the graphic
organizer.
HELP ME PLEASSEEEE
I'll give you brainliest I promise
Answer:
The missing information or their role in the discovery of the cell is as follows:
Robert Hooke: He was the first scientist to called cells to tiny box-like cavities he saw in cork and illustrated as cells.
A. Leeuwenhoek: he was a microscopist and microbiologist who used microscopes and observed many other living cells. He called animalcules to these single-cell living organisms later used to prove that cells are the fundamental unit of life.
Schwann and Schleiden: They presented the theory that suggested that the cells are basic building blocks of all living things.
Virchow: He observed that the cell dividing and come from pre-existing cells.
What is the equilibrium constant for the reaction
SO2(g) + NO2(9) = SO3(g) + NO(g)?
А. Keq: [S03)(S02]
[NO][NO2]
B. Keq: [SO2)(NO2]
[SO3)(NO]
C. Keq: [SO3)3(NO]
[SO2)2(NO2)2
D. Keq: [SO3)(NO]
[SO2]NO2]
Answer:
D. Keq: [SO3][NO] /[SO2]NO2]
Explanation:
Hello!
In this case, according to the process to set up equilibrium expressions for chemical reactions at equilibrium, we realize we need to write up the concentration of products on top and that of reactants on bottom; thus, for there chemical reaction herein specified, we obtain:
[tex]Keq=\frac{[SO_3][NO]}{[SO_2][NO_2]}[/tex]
Thereby, the answer is D. Keq: [SO3][NO] /[SO2]NO2].
Best regards!
Answer:
D
Explanation:
7. Consider an element with 2
electrons on the 1st shell and 4
electrons on the 2nd shell. What
element is likely to have that Bohr
model?
Answer:
Carbon (C)
Explanation:
The electron configuration of Carbon is 2-4.
there is no such thing as a universal solvent- explain? I’ll mark brainiest!!!
Answer:
A true universal solvent does not exist. Although water is considered to be a the "universal solvent" it only dissolves other polar molecules. It does not dissolve nonpolar molecules, including organic compounds such as fats and oils. It is only called so because it can dissolve many more than other liquids.
What is the number of nitrogen molecules that reacted with excess hydrogen to make 2x10^10 molecules of ammonia
According to stoichiometry and mole concept,1×10¹⁰ molecules reacted with excess hydrogen to make 2 x 10¹⁰ molecules of ammonia.
What is stoichiometry?Stoichiometry is the determination of proportions of elements or compounds in a chemical reaction. The related relations are based on law of conservation of mass and law of combining weights and volumes.
Stoichiometry is used in quantitative analysis for measuring concentrations of substances present in the sample.It is important while balancing chemical equations.
In the given example, as 1 molecule of nitrogen produces 2 molecules of ammonia
∴2 x 10¹⁰ molecules of ammonia will be produced when 2 x 10¹⁰×1/2=1×10¹⁰ molecules .
Thus, 1×10¹⁰ molecules reacted with excess hydrogen to make 2 x 10¹⁰ molecules of ammonia.
Learn more about stoichiometry,here:
https://brainly.com/question/9743981
#SPJ6
Given a sample of poly[ethylene-stat-(vinyl acetate)] A.Calculate the mean repeat unit molar mass for a sample of poly[ethylene-stat-(vinyl acetate)] that comprises 12.9 wt% vinyl acetate repeat units.B.Given that its number-average molar mass is 39,870 g/mol, calculate the number-average degree of polymerization of the copolymer.
Answer:
a) The mean repeat unit molar mass for PEVA is 30.72 g/mol
b) degree of polymerization of the copolymer is 1300
Explanation:
Given that;
the wt% of copolymer consist of 12.9 wt% of vinyl acetate and 87.1 wt% Ethylene.
Basis: 100 g of PEVA consist of 12.9 of vinyl acetate and 87.1g of Ethylene.
now we calculate the mole fraction of vinyl acetate Ethylene in the copolymer;
the molecular weights of vinyl acetate and ethylene are 86.09 g/mol and 28.05 g/mol respectively
so
moles of vinyl acetate = wt. of vinyl acetate / molecular weights of vinyl acetate
moles of vinyl acetate = 12.9 g / 86.09 g/mol
moles of vinyl acetate = 0.1498 mol
moles of Ethylene = wt. of Ethylene / molecular weights of Ethylene
moles of Ethylene = 87.1 g / 28.05 d/mol
moles of Ethylene = 3.1052 mol
Total moles = 0.1498 mol + 3.1052 mol = 3.255 mol
Next we calculate the mole percent;
mole percent of vinyl acetate [tex]X_{V}[/tex] = moles of vinyl acetate / total moles
[tex]X_{V}[/tex] = (0.1498 mol / 3.255 mol) × 100
[tex]X_{V}[/tex] = 4.6%
mole percent of Ethylene [tex]X_{E}[/tex] = moles of Ethylene / total moles
[tex]X_{E}[/tex] = (3.1052 mol / 3.255 mol) × 100
[tex]X_{E}[/tex] = 95.397% ≈ 95.4%
we know that, mean repeat unit molar mass for a sample = ∑[tex]X_{i}[/tex][tex]M_{i}[/tex]
where [tex]X_{i}[/tex] is the fraction ratio and [tex]M_{i}[/tex] is the molecular weight
so or the PEVA
mean repeat unit molar mass M = ( [tex]X_{V}[/tex][tex]M_{V}[/tex]) + ( [tex]X_{E}[/tex][tex]M_{E}[/tex])
so we substitute
M = ( 4.6% × 86.09) + ( 95.4% × 28.05 )
M = 3.96014 + 26.7597
M = 30.72 g/mol
Therefore, The mean repeat unit molar mass for PEVA is 30.72 g/mol
b)
Degree of polymerization
[tex]DP_{n}[/tex] = [tex]\frac{M_{n} }{M}[/tex]
where [tex]M_{n}[/tex] is the number average molecular weight ( 39,870 g/mol )
so we substitute
[tex]DP_{n}[/tex] = 39,870 g/mol / 30.72 g/mol
[tex]DP_{n}[/tex] = 1297.85 ≈ 1300 { 3 significance figure }
Therefore, degree of polymerization of the copolymer is 1300
How many moles of "02" are in a 192g sample of O2? *
1
2
3
4
5
6
7
Answer: The number of moles of [tex]O_2[/tex] are 6.
Explanation:
According to avogadro's law, 1 mole of every substance occupies 22.4 L at STP and contains avogadro's number [tex]6.023\times 10^{23}[/tex] of particles.
To calculate the moles, we use the equation:
[tex]\text{Number of moles}=\frac{\text{Given mass}}{\text {Molar mass}}[/tex]
Given mass = 192 g
Molar mass = 32 g/mol
[tex]\text{Number of moles}=\frac{192g}{32g/mol}=6mol[/tex]
The number of moles of [tex]O_2[/tex] are 6.
When lava cools outside the Earth, ____ igneous rocks are formed
Answer:The rock forms large crystals
Explanation:
A sample of metal has a mass of 16.12 g, and a volume of 4.87 mL. What is the density of this metal?
Answer:
3.31 g/cm³
Explanation:
1000cm³ = 1L
4.87mL = 4.87 × 10^-3 × 1000 = 4.87 cm³
density = mass/volume = 16.12/4.87 = 3.31 g/cm³
PLEASE HELP! Will mark Brainly if correct!
Answer:
6.591
explanation
mass of weight is 1.092 , and mass of weight boat and sample = 7.683
mass of the solid sample= (mass of weight boat and sample) - (weight of the boat) = (1.092-7683) = 6.591 g
hence, the mass of the solid sample is 6.591 g
what do liquid methane and liquid water have in common
Answer:
methane on the other hand is made of one carbon atom and 4 hydrogen atoms. like water, the bonds are covalent.
Liquid methane and Liquid water are both covalent compounds, thus, they both have covalent bonds in common.
What is methane?Methane is a covalent compound which exists as a gas at room temperature.
Methane is composed of four hydrogen atoms and a carbon atom linked together by covalent bonds.
What is water?Water is a covalent compound which exists as a liquid at room temperature.
Water is composed of two atoms of hydrogen and one atom of oxygen linked together by covalent bonds.
What do liquid methane and Liquid water have in common?Since both liquid water and liquid methane are covalent compounds, they both have covalent bonds in common.
Therefore, liquid methane and liquid water have covalent bonds in common.
Learn more about covalent bonds at: https://brainly.com/question/1853488
Ionic compounds form between two metals true
Answer (TL;DR):
False, ionic compounds form between a metal and a nonmetal. This is because metals are looking to lose electrons to get a full outer shell while nonmetals are looking to gain electrons to get a full outer shell.
Explanation:
Atoms have a full outer shell when their outermost shell holds the maximum number of electrons. For example, if the outermost shell is the first shell of the atom, it can hold up to 2 atoms. When this shell holds 2 atoms, it is considered full. If the outermost shell is the second shell of the atom, it can hold up to 8 atoms. When this shell holds 8 atoms, it is considered full. This can also be referred to as an atom "gaining a complete octet." The reason that atoms want a complete octet is to become stable and less reactive.
Let's say an atom with 3 shells has only 1 electron on the third shell. It doesn't have a complete octet and it wants to gain one. The third shell can hold up to 8 electrons. So, to gain a complete octet, the atom can either gain 7 electrons or just lose the 1 that it already has, which is the easier option. This is the case with metals and the opposite goes for nonmetals.
Because metals want to lose electrons and nonmetals want to gain electrons, they form compounds with each other.
I hope this helps!
I need help please please
Answer:
B should be the answer, and ur low-key valid lol
Explanation: