Answer:
3
Explanation:
You have 45.2 liters of SO2. This would be equal to
grams of S02
• Use ROUNDED masses from the periodic table in your calculations
• Answer can ONLY include numbers, no units
• Answer should be 3 digits (no decimals)
Answer:
you speak spanish
speak spanish
PLEASE HELP IMMEDIATELY
Answer:
Ability to move
Must be able to eat
grow and develop
reproduce
respond to environment
taking in food
Explanation:
Hope this helped! Have a good day!
Which of the following statements is
incorrect about heat and
temperature?
How could the age be interpreted in a rock in which the blocking temperature has been reached?
Energy is transferred from an organism to the physical environment through __________.
A. respiration
B. heat loss
C. photosynthesis
D. consumption
what is Newton first law
Answer:
law of inertia hope it helps
Gas A has a partial pressure of 6 atm. Gas B has a partial pressure of 2 atm.
What is the partial pressure of Gas C, if the total pressure of the combined
gases is 10 atm?
Answer:
2 atm
Explanation: add both partial pressures and subtract from total pressure
What is plotted on the Y axis
Speed
Distance or time
How would you prepare a 1 L solution of 3 M MgO?
Answer:
You need to measure 120.9132 grams of MgO and add to 1 liter of distilled water in a beaker.
Explanation:
Capital M stands for molarity, or moles/liter. So 3 M MgO means 3 moles per liter of MgO.
1 L × [tex]\frac{3 moles MgO}{1 L MgO}[/tex] = 3 moles MgO
This means you need to measure 3 moles MgO to put into 1 Liter of water.
But you don't know how much that is, so you need to convert moles to grams.
First you need to find how many grams are in 1 mole of MgO.
You can search the molar mass of MgO online to get: 40.3044 g
But if you don't have the internet, use the periodic table to add the masses of Mg and O: 24.305 g + 15.999 g = 40.3044 g
Then write the fraction so that the units cancel out, so you get grams by itself on the top of the fraction.
1 L × [tex]\frac{3 moles MgO}{1 L MgO}[/tex] × [tex]\frac{40.3044 g MgO}{1 mole MgO}[/tex] = 120.9132 g MgO
You need to measure 120.9132 grams of MgO and add to 1 liter of distilled water.
We will prepare 1 L solution of 3 M MgO, by dissolving 120.91 grams of MgO in 1 litre of water.
How molarity is define?Molarity is define as the no. of moles of solute dissolve in per liter if solvent or solution & it is represented as:
M = n / v
In the question, it is given that:
Molarity of MgO = 3M i.e. 3 moles of MgO is present in 1 liter of solution.
So, we have moles of MgO = 3 moles
Now, we convert moles of MgO to grams to know how much of solute is required, in the following manner:
n = W / M, where
M = molar mass of MgO = 40.30 g/mole
W = to find?
W = 3 mole × 40.30 g/mole = 120.91 grams
Hence, 120.91 grams of MgO is required.
To know more about molarity, visit the below link:
https://brainly.com/question/14469428
6. Put the sentences in order to show how electrical energy is produced at a coal-fired
electric power plant.
a. The turbine spins a shaft connected to
a generator.
b. Coal is burned in a furnace through
combustion.
c. Kinetic energy is converted to electrical
energy.
d. Pressurized steam is used to spin a
turbine.
e. Heated water is vaporized inside a boiler.
this is when an organism like insects or plants become trapped in amber
thats very nice lol, things stuck in amber are very cool
how does carbon apply to real life
Answer: This is the magic element for everything on Earth. All life on Earth depends on carbon (C). It is in nearly every biological compound that makes up our bodies, systems, organs, cells, and organelles. When you breathe out, there is a lot of carbon dioxide (CO2).
Explanation:
Answer:
Like Carbon dioxide? or just like carbon? well anyway we breath in oxygen and breath out carbon the carbon goes into the air and gets re-cleaned turned into oxygen again. And also thousands of cars that run everyday going places let out tons of carbon into the the air every minute. (aka which is bad for human society, considering there's probably more carbon in the air then there is oxygen.)
Explanation:
So yes carbon does apply in everyday life. By the way the other person is right too. :)
In which numbered position would a Period 4 element that is a metal with three valence electrons be located?
A) Position 13
B) Position 15
C) Position 20
D) Position 31
The position where a Period 4 element that is also a metal with three valence electrons would be located is: B) Position 15.
What is a periodic table?A periodic table can be defined as an organized tabular array of all the chemical elements, which is typically arranged in order of increasing atomic number or number of protons (in rows).
In Chemistry, a periodic table comprises seven (7) rows and eighteen (18) columns. Also, all chemical elements are arranged (grouped) on the periodic table based on their atomic number (number of protons).
In this context, the position where a Period 4 element that is also a metal with three valence electrons would be located is Position 15 on the periodic table.
Read more on periodic table here: https://brainly.com/question/18384230
What was the niche of the lion king
Answer:
Known as the "king of the jungle" or the "king of beasts," lions are at the top of the food chain, and they hunt and eat other animals to survive. Their niche in the ecosystem allows them to help with other animal population control and prevent the spread of disease.
Explanation:
How many grams of oxygen are required to react with 2.05 g
g
of dihydrogen sulfide?
Answer:
38 g
Explanation:
I think thats the answer in your question
Which of the following bonds has the greatest polarity?
P4
Br-Br
Te-F
CI-F
Bond polarity and ionic character go hand in hand: We can say that polarity and ionic character are positively correlated. The classical way to determine either is to compare the electronegativity difference (ΔEN) between the bonding atoms. The greater the difference in electronegativity, the larger the dipole moment, the greater the polarity, and the greater the ionic character of the bond.
The Pauling electronegativity scale, which should be provided in most chemistry texts and is certainly available online, can be used to determine ΔEN. As a very general rule of thumb, an ΔEN that is equal to 2.0 or greater indicates an ionic bond. We don't have to worry about that here, though, since we're only interested in polarity. But this is just some conceptual relation to consider; indeed, ionic bonds can be seen as very polar covalent bonds (or covalent bonds with significant ionic character).
There is no known bond that has a 100% ionic character (ΔEN = 4), i.e., a purely ionic bond. But there are many bonds that we know of with 0% ionic character (ΔEN = 0), i.e., a completely nonpolar bond. We can think about this logically without even knowing specific electronegativity values: If the difference in electronegativity between two bonding atoms is 0, then the two atoms must have equivalent electronegativities. And when can this be the case? Well, atoms from the same element have the same electronegativity. So one case of completely nonpolar bonding would be covalent bonding between atoms of the same element.
In the question given, there are two such cases: P4 and Br-Br. P4 is a tetrahedral molecule composed of four covalently bonded P atoms, each one bearing a lone electron pair and bonded to the other three. With each P having the same electronegativity (ΔEN = 0), no P-P bond in P4 has a dipole moment, and the P4 molecule itself is nonpolar. Br-Br is how bromine is found naturally (as diatomic Br₂); since this is a covalent bond between the atoms of the same element, the ΔEN = 0 and there is no dipole moment. A bromine molecule is completely nonpolar.
Fluorine (F) has the greatest electronegativity among the elements, so whether the Te-F or the Cl-F bond has the greater polarity (i.e., the greater ΔEN) really depends on the electronegativity of Te and Cl.
But let's think about this first. Both Cl and F are halogens; Cl is in the period right below F, and, following periodic trends, Cl itself is quite electronegative. Generally, nonmetals don't form ionic bonds with each other (the underlying reason is complicated and not relevant here, but that notion agrees with ΔEN between any two nonmetals being less than 2.0). Nonmetallic elements can form very polar covalent bonds whose ΔEN is very close to 2.0, however.
Tellurium (Te) is a metalloid that is three periods below F. Electronegativity generally decreases as you go down a group. Even though Te and Cl are not in the same group, the fact that Te is two periods below should give a strong presumption that Te has a lower electronegativity than Cl. Moreover, electronegativity increases you move left to right on the periodic table (that is, as the group number increases); Te is in a group to the left of fluorine's and chlorine's. So, using periodic trends alone, we know that Te is in a group to the left of and below that of Cl, both of which trend toward decreasing electronegativity. Thus, it would be reasonable to assume that Te would have a smaller electronegativity than Cl. And so, the ΔEN of Te-F > ΔEN of Cl-F, which means the Te-F bond should have the greater polarity. And, indeed, this is true using the Pauling scale: The EN of F is 4.0; the EN of Cl is 3.0; and the EN of Te is 2.1.
In all, given that the ΔEN of P-P = 0; ΔEN of Br-Br = 0; ΔEN of Te-F = 1.9; and ΔEN of Cl-F = 1.0; the Te-F bond has the greatest polarity.
Which of the statements below are TRUE, knowing what we know about forces and motion?
Choose ANY that are TRUE.
A. Objects at rest need a force to keep them at rest.
B. A net force causes objects to accelerate.
C. If forces acting on an object are balanced, the object can change its velocity.
D.Inertia means that an object will keep its same state of motion.
Mass and weight are the same thing and are both forces.
Answer:
b
Explanation:
if there is a net force acting on an object, the object will have an acceleration and the objects velocity will change
__H2 + __O2 --> __H2O
If 42.3 moles of water are produced, how many moles of hydrogen gas was reacted?
Answer:
42.3moles
Explanation:
The chemical equation given in this question is as follows:
H2 + O2 → H2O
However, this equation is unbalanced, the balanced chemical equation is as follows:
2H2 + O2 → 2H2O
This equation shows that;
2 moles of hydrogen gas (H2) will produce 2 moles of water (H2O)
Hence, If 42.3 moles of water (H2O) are produced, 42.3 × 2/2
= 42.3moles of hydrogen was reacted.
You have a 9.51 mol sample of an
unknown element. If the sample has a mass
of 1157.9376 g, what element is this?
Answer:
Antimony
Explanation:
Number of moles = 9.51 mol
Mass= 1157.9376 g
The identity of an element is obtained from it's Molar mass.
This is given by the equation;
Molar mass = Mass / Number of moles
Molar mass = 1157.9376 g / 9.51 mol
Molar mass = 121.76
The only element with molar mass of 121.76 is Antimony
An object accelerates at 8 m/s2 when a force of 40 N is applied to it. What is the mass of the object
Answer:
f=ma
40=m*8
m=5kg
another object of same mass is added
=>m=5+5=10kg
f=10*8=80N
Explanation:
Which is one factor that increases the speed of a sound wave? A. higher temperature B. lower temperature C. traveling in a liquid rather than a solid D. traveling in a gas rather than a liquid
Answer: c
Explanation:
what is the only thing in nature that can be a solid,liquid,or gas?
A.water
B.hydrogen
C.helium
D.oxygen
pls answer will give brainliest
Answer:
A. Water
Explanation:
Virtually every known substance can be referred to as MATTER, as long as it has weight and occupies space. Matter can exists in three different forms namely: solid, liquid and gaseous states.
However, each state of matter has its own unique property that characterizes it. WATER is the only matter that can exists in the three different states as follows:
- LIQUID - WATER
- SOLID - ICE
- GASEOUS - STEAM OR VAPOUR.
How many moles would be present in 300 liters of dinitrogen monoxide at
STP?
Answer: 13.4
Explanation: i guessed it and got it correct on ck-12
STP is the standard pressure and temperature condition of the ideal gas. 0.13 moles of dinitrogen monoxide will be present at STP.
What is the ideal gas equation?An ideal gas equation is a relation between the pressure, volume with moles, gas constant, and the temperature of the ideal gas. The ideal gas equation is given by,
[tex]\rm PV = nRT[/tex]
Given at STP,
Pressure = 1 atm
Volume = 300 L
Moles = ?
Gas constant =8.3144598 J per mol per Kelvin
Temperature = 273 K
Substituting values in the ideal gas equation we get:
[tex]\begin{aligned} \rm n &= \rm \dfrac{ PV}{RT}\\\\&= \dfrac{1 \times 300}{273 \times 8.314}\\\\&=0.1321\end{aligned}[/tex]
Therefore, 0.13 moles of dinitrogen monoxide are produced at STP.
Learn more about STP here:
https://brainly.com/question/15828565
where do these all go?
Answer:
The one inside with "+"--- Protons
The grey ones inside--neutrons
The ones on the electron orbits---electron
Everything is called an atom
Explanation:
what are three disadvantages of making and using plastic?
sugar cannot be separated from sugar solution by filtering explain why?
Answer:
The sugar particles are so small that they have dissolved in the water, and can easily pass through the filter.
Answer:
Sugar can not be separated due it has very fine particles.
Explanation:
When we use to separate sugar with salt they both are dissolved with the water.
the lungs are covered with a thin layer called ________
interstitium
#keeponlearning
Answer:
pleura
Explanation:
The lungs are covered by a thin tissue layer called the pleura. The same kind of thin tissue lines the inside of the chest cavity -- also called pleura.
Explain whether chromium is more or less reactive than aluminium.
Answer: Chromium is less reactive as compared to Aluminium as it can not easily electrons as aluminium.
Explanation:
The arrangement of metals in a series according to the decreasing order of their reactivity is called reactivity series.
The metals that are placed above hydrogen are more reactive and those below hydrogen are less reactive.
A metal placed above another metal can displace lower metal from its salt solution. Thus a metal placed above in series is more reactive than metals placed below it.
As aluminium can easily lose electrons as compared to chromium , it is more reactive than Chromium.
Even when an object appears to be at rest, its atoms and molecules are in constant motion
A.true
B.false
(6th-grade science please help)
Answer:
the answer is True
Explanation:
the answer is True
Science has had no negative impacts on society. Please select the best answer from the choices provided T F
Answer:
false
Explanation:
not all science is good, or has good effects
False.
Science can possibly be dangerous when used by the wrong people. It can be used to create bombs, bioweapons, and much more.
Please mark Brainliest if this was helpful, and let me know if you have questions! :)