Sarah needs to sit 7.5 meters from Tom to keep the seesaw at static equilibrium.
For the seesaw to be in static equilibrium, the torques on each side of the pivot must be equal. The torque is calculated by multiplying the force by the distance from the pivot.
Tom's weight is 100 kg and he is sitting 5 meters from the pivot. This means that his torque is 500 N * 5 m = 2500 N m.
Sarah's weight is 150 kg and she needs to sit at a distance such that her torque is equal to Tom's torque. This means that she needs to sit 7.5 meters from the pivot.
Here is the calculation for the distance Sarah needs to sit:
d = 2500 N m / 150 kg = 16.67 m
This is slightly more than 7.5 meters because Sarah's weight is greater than Tom's weight.
To learn more about static equilibrium click here: brainly.com/question/3407536
#SPJ11
In placing a sample on a microscope slide, a glass cover is placed over a water drop on the glass slide. Light incident from above can reflect from the top and bottom of the glass cover and from the glass slide below the water drop. At which surfaces will there be a phase change in the reflected light? Choose all surfaces at
which there will be a phase change in the reflected light. [For clarification: there are five layers to consider here, with four boundary surfaces between adjacent layers: (1) air above the glass cover, (2) the glass cover, (3) the water layer below the glass cover, (4) the
glass slide below the water layer, and (5) air below the glass slide.]
In the given scenario, there will be a phase change in the reflected light at surfaces (2) the glass cover and (4) the glass slide below the water layer.
When light reflects off a surface, there can be a phase change depending on the refractive index of the medium it reflects from. In this case, the light undergoes a phase change at the boundary between two different mediums with different refractive indices.
At surface (2), the light reflects from the top surface of the glass cover. Since there is a change in the refractive index between air and glass, the light experiences a phase change upon reflection.
Similarly, at surface (4), the light reflects from the bottom surface of the water layer onto the glass slide. Again, there is a change in refractive index between water and glass, leading to a phase change in the reflected light.
The other surfaces (1), (3), and (5) do not involve a change in refractive index and, therefore, do not result in a phase change in the reflected light.
Learn more about the refractive index:
https://brainly.com/question/83184
#SPJ11
A mop is pushed across the floor with a force F of 41.9 N at an angle of 0 = 49.3°. The mass of the mop head is m = 2.35 kg. Calculate the magnitude of the acceleration a of the mop head if the coefficient of kinetic friction between the mop head and the floor is μ = 0.330. a = 3.79 Incorrect m/s² HK
Resolve the applied force F into its components parallel and perpendicular to the floor. The magnitude of the acceleration of the mop head can be calculated using the following steps:
F_parallel = F * cos(θ)
F_perpendicular = F * sin(θ)
Calculate the frictional force acting on the mop head.
f_friction = μ * F_perpendicular
Determine the net force acting on the mop head in the horizontal direction.
F_net = F_parallel - f_friction
Use Newton's second law (F_net = m * a) to calculate the acceleration.
a = F_net / m
Substituting the given values into the equations:
F_parallel = 41.9 N * cos(49.3°) = 41.9 N * 0.649 = 27.171 N
F_perpendicular = 41.9 N * sin(49.3°) = 41.9 N * 0.761 = 31.8489 N
f_friction = 0.330 * 31.8489 N = 10.5113 N
F_net = 27.171 N - 10.5113 N = 16.6597 N
a = 16.6597 N / 2.35 kg = 7.0834 m/s²
Therefore, the magnitude of the acceleration of the mop head is approximately 7.08 m/s².
Summary: a = 7.08 m/s²
To learn more about acceleration click here.
brainly.com/question/31946450
#SPJ11
Ronaldo kicked a ball with an initial speed of 12 ms-1 at 35o angle with the ball experienced a constant vertical acceleration of -9.81 ms-2.
a) Calculate the ball’s maximum height and distance.
The ball's maximum height is approximately 2.38 meters, and the horizontal distance it travels is approximately 6.86 meters.
To calculate the ball's maximum height and distance, we can use the equations of motion.
Resolve the initial velocity:
We need to resolve the initial velocity of 12 m/s into its vertical and horizontal components.
The vertical component can be calculated as V0y = V0 * sin(θ),
where V0 is the initial velocity and θ is the angle (35 degrees in this case).
V0y = 12 * sin(35) ≈ 6.87 m/s.
The horizontal component can be calculated as V0x = V0 * cos(θ),
where V0 is the initial velocity and θ is the angle.
V0x = 12 * cos(35) ≈ 9.80 m/s.
Calculate time of flight:
The time it takes for the ball to reach its maximum height can be found using the equation t = V0y / g, where g is the acceleration due to gravity (-9.81 m/s^2). t = 6.87 / 9.81 ≈ 0.70 s.
Calculate maximum height:
The maximum height (h) can be found using the equation h = (V0y)^2 / (2 * |g|), where |g| is the magnitude of the acceleration due to gravity.
h = (6.87)^2 / (2 * 9.81) ≈ 2.38 m.
Calculate horizontal distance:
The horizontal distance (d) can be found using the equation d = V0x * t, where V0x is the horizontal component of the initial velocity and t is the time of flight.
d = 9.80 * 0.70 ≈ 6.86 m.
Therefore, the ball's maximum height is approximately 2.38 meters, and the horizontal distance it travels is approximately 6.86 meters.
Learn more about distance from the given link,
https://brainly.com/question/26550516
#SPJ11
The electric field is 15 V/m and the length of one edge of the
cube is 30 cm. What is the NET flow through the full cube?
The net flow through the full cube is 8.1 V·m^2.
To determine the net flow through the full cube, we need to calculate the total electric flux passing through its surfaces.
Given:
Electric field (E) = 15 V/mLength of one edge of the cube (L) = 30 cm = 0.3 mThe electric flux (Φ) passing through a surface is given by the equation Φ = E * A * cos(θ), where A is the area of the surface and θ is the angle between the electric field and the normal vector of the surface.
In the case of a cube, there are six equal square surfaces, and the angle (θ) between the electric field and the normal vector is 0 degrees since the field is perpendicular to each surface.
The area (A) of one square surface of the cube is L^2 = (0.3 m)^2 = 0.09 m^2.
The electric flux passing through one surface is then Φ = E * A * cos(θ) = 15 V/m * 0.09 m^2 * cos(0°) = 15 V * 0.09 m^2 = 1.35 V·m^2.
Since there are six surfaces, the total electric flux passing through the cube is 6 * 1.35 V·m^2 = 8.1 V·m^2.
Therefore, the net flow through the full cube is 8.1 V·m^2.
To learn more about net flow, Visit:
https://brainly.com/question/2804189
#SPJ11
Professor Rapp has decided to hold a racing competition between all of his CDs. A 1.5 m long slope is set at an angle 25 ° above the horizontal. A CD can be modeled like a solid disk with a radius of 6.0 cm and a mass of 12g. If a CD is placed at the top of the slope and rolls down to the bottom without slipping or any rolling friction, what would the speed at the bottom be?
The speed at the bottom of the slope is 3.10m/s when a CD is placed at the top of the slope and rolls down to the bottom without slipping or any rolling friction.
Given that a CD can be modeled like a solid disk with a radius of 6.0 cm and a mass of 12 g. A 1.5 m long slope is set at an angle 25° above the horizontal. If a CD is placed at the top of the slope and rolls down to the bottom without slipping or any rolling friction, the speed at the bottom is calculated as follows:
Firstly, find the potential energy of the CD:
PE = mgh where m = 12g, h = 1.5 sin 25 = 0.6167m (height of the slope), and g = 9.8m/s²
PE = (12/1000) x 9.8 x 0.6167
PE = 0.0762J
The potential energy gets converted into kinetic energy at the bottom of the slope.
KE = 1/2 mv² where m = 12g and v = speed at the bottom
v = sqrt((2KE)/m)
The total energy is conserved, so
KE = PE
v = sqrt((2PE)/m)
Now, the speed at the bottom of the slope is:
v = sqrt((2 x 0.0762)/0.012)
v = 3.10m/s
Therefore, the speed at the bottom of the slope is 3.10m/s when a CD is placed at the top of the slope and rolls down to the bottom without slipping or any rolling friction.
Learn more about friction https://brainly.com/question/24338873
#SPJ11
One long wire lies along an x axis and carries a current of 53 A in the positive × direction. A second long wire is perpendicular to the xy plane, passes through the point (0, 4.2 m, 0), and carries a current of 52 A in the positive z direction. What is the magnitude of the
resulting magnetic field at the point (0, 1.4 m, 0)?
The magnitude of the resulting magnetic field at the point (0, 1.4 m, 0) is approximately 8.87 × 10⁻⁶ T.
The magnetic field is a vector quantity and it has both magnitude and direction. The magnetic field is produced due to the moving electric charges, and it can be represented by magnetic field lines. The strength of the magnetic field is represented by the density of magnetic field lines, and the direction of the magnetic field is represented by the orientation of the magnetic field lines. The formula for the magnetic field produced by a current-carrying conductor is given byB = (μ₀/4π) (I₁ L₁) / r₁ ²B = (μ₀/4π) (I₂ L₂) / r₂
whereB is the magnetic field,μ₀ is the permeability of free space, I₁ and I₂ are the currents in the two conductors, L₁ and L₂ are the lengths of the conductors, r₁ and r₂ are the distances between the point where the magnetic field is to be found and the two conductors respectively.Given data:Current in first wire I₁ = 53 A
Current in second wire I₂ = 52 A
Distance from the first wire r₁ = 1.4 m
Distance from the second wire r₂ = 4.2 m
Formula used to find the magnetic field
B = (μ₀/4π) (I₁ L₁) / r₁ ²B = (μ₀/4π) (I₂ L₂) / r₂For the first wire: The wire lies along the x-axis and carries a current of 53 A in the positive × direction. Therefore, I₁ = 53 A, L₁ = ∞ (the wire is infinite), and r₁ = 1.4 m.
So, the magnetic field due to the first wire is,B₁ = (μ₀/4π) (I₁ L₁) / r₁ ²= (4π×10⁻⁷ × 53) / (4π × 1.4²)= (53 × 10⁻⁷) / (1.96)≈ 2.70 × 10⁻⁵ T (approximately)
For the second wire: The wire is perpendicular to the xy plane, passes through the point (0, 4.2 m, 0), and carries a current of 52 A in the positive z direction.
Therefore, I₂ = 52 A, L₂ = ∞, and r₂ = 4.2 m.
So, the magnetic field due to the second wire is,B₂ = (μ₀/4π) (I₂ L₂) / r₂= (4π×10⁻⁷ × 52) / (4π × 4.2)= (52 × 10⁻⁷) / (4.2)≈ 1.24 × 10⁻⁵ T (approximately)
The magnitude of the resulting magnetic field at the point (0, 1.4 m, 0) is the vector sum of B₁ and B₂ at that point and can be calculated as,
B = √(B₁² + B₂²)= √[(2.70 × 10⁻⁵)² + (1.24 × 10⁻⁵)²]= √(7.8735 × 10⁻¹¹)≈ 8.87 × 10⁻⁶ T (approximately)
To know more about magnitude:
https://brainly.com/question/28714281
#SPJ11
3) Monochromatic light of wavelength =460 nm is incident on a pair of closely spaced slits 0.2 mm apart. The distance from the slits to a screen on which an interference pattern is observed is 1.2m.
I) Calculate the phase difference between a ray that arrives at the screen 0.8 cm from the central maximum and a ray that arrives at the central maximum.
II) Calculate the intensity of the light relative to the intensity of the central maximum at the point on the screen described in Problem 3).
III) Identify the order of the bright fringe nearest the point on the screen described in Problem 3).
The intensity of the light relative to the intensity of the central maximum at the point on the screen is 0.96.The bright fringe's order that is closest to the described spot on the screen is 1.73× 10^-6.
Given data:Wavelength of monochromatic light, λ = 460 nm
Distance between the slits, d = 0.2 mm
Distance from the slits to screen, L = 1.2 m
Distance from the central maximum, x = 0.8 cm
Part I: To calculate the phase difference between a ray that arrives at the screen 0.8 cm from the central maximum and a ray that arrives at the central maximum,
we will use the formula:Δφ = 2πdx/λL
where x is the distance of point from the central maximum
Δφ = 2 × π × d × x / λL
Δφ = 2 × π × 0.2 × 0.008 / 460 × 1.2
Δφ = 2.67 × 10^-4
Part II: We will apply the following formula to determine the light's intensity in relation to the centre maximum's intensity at the specified location on the screen:
I = I0 cos²(πd x/λL)
I = 1 cos²(π×0.2×0.008 / 460×1.2)
I = 0.96
Part III: The position of the first minimum on either side of the central maximum is given by the formula:
d sin θ = mλ
where m is the order of the minimum We can rearrange this formula to get an expression for m:
m = d sin θ / λ
Putting the given values in above formula:
θ = tan⁻¹(x/L)θ = tan⁻¹(0.008 / 1.2)
θ = 0.004 rad
Putting the values of given data in above formula:
m = 0.2 × sin(0.004) / 460 × 10⁻9m = 1.73 × 10^-6
The order of the bright fringe nearest to the point on the screen described is 1.73 × 10^-6.
learn more about intensity from given link
https://brainly.com/question/7068958
#SPJ11
A coil has a resistance of 25Ω and the inductance of 30mH is connected to a direct voltage of 5V. Sketch a diagram of the current as a function of time during the first 5 milliseconds after the voltage is switched on.
Answer:
A coil with a resistance of 25 ohms and an inductance of 30 millihenries is connected to a direct voltage of 5 volts.
The current will increase linearly for the first 0.75 milliseconds, and then reach a maximum value of 0.2 amperes. The current will then decrease exponentially.
Explanation:
A coil with a resistance of 25 ohms and an inductance of 30 millihenries is connected to a direct voltage of 5 volts.
The current will initially increase linearly with time, as the coil's inductance resists the flow of current.
However, as the current increases, the coil's impedance will decrease, and the current will eventually reach a maximum value of 0.2 amperes. The current will then decrease exponentially, with a time constant of 0.75 milliseconds.
The following graph shows the current as a function of time during the first 5 milliseconds after the voltage is switched on:
Current (A)
0.5
0.4
0.3
0.2
0.1
0
Time (ms)
0
1
2
3
4
5
The graph shows that the current increases linearly for the first 0.75 milliseconds, and then reaches a maximum value of 0.2 amperes. The current then decreases exponentially, with a time constant of 0.75 milliseconds.
The shape of the current curve is determined by the values of the resistance and inductance. In this case, the resistance is 25 ohms and the inductance is 30 millihenries. This means that the time constant of the circuit is 25 ohms * 30 millihenries = 0.75 milliseconds.
Learn more about Electrical circuits.
https://brainly.com/question/33261228
#SPJ11
The driver of a truck slams on the brakes when he sees a tree blocking the road. The truck slows down uniformly with acceleration -5.80 m/s² for 4.20 s, making skid marks 65.0 m long that end at the tree. With what speed does the truck then strike the tree?
Speed is the measure of how quickly an object moves or the rate at which it covers a distance. The truck strikes the tree with a speed of 24.3 m/s.
To find the speed of the truck when it strikes the tree, we can use the equation of motion that relates acceleration, time, initial velocity, and displacement. In this case, the truck slows down uniformly with an acceleration of -5.80 m/s² for a time of 4.20 s, and the displacement is given as 65.0 m (the length of the skid marks). The initial velocity is unknown.
Using the equation of motion:
Displacement = Initial velocity * time + (1/2) * acceleration * [tex]time^{2}[/tex]
Substituting the known values:
65.0 m = Initial velocity * 4.20 s + (1/2) * (-5.80 m/s²) * (4.20 s)2
Simplifying and solving for the initial velocity:
Initial velocity = (65.0 m - (1/2) * (-5.80 m/s²) * (4.20 s)2) / 4.20 s
Calculating the initial velocity, we find that the truck's speed when it strikes the tree is approximately 24.3 m/s.
To learn more about speed click here:
brainly.com/question/27888149
#SPJ11
Gary is interested in the effect of lighting on focus so he tests participants ability to focus on a complex task under three different lighting conditions: bright lighting (M = 10), low lighting (M = 5), neon lighting (M = 4). His results were significant, F(2, 90) = 5.6, p < .05. What can Gary conclude? O a. Bright lights make it easier to focus than low lights or neon lights. O b. Type of lighting has no effect on focus. O c. Bright lights make it more difficult to focus than low lights or neon lights. O d. Type of lighting has some effect on focus.
Based on the given information, Gary conducted an experiment to test the effect of lighting on participants' ability to focus. He compared three different lighting conditions: bright lighting, low lighting, and neon lighting. The results showed a significant effect, with an F-value of 5.6 and p-value less than 0.05. Now we need to determine what Gary can conclude from these results.
The F-value and p-value are indicators of statistical significance in an analysis of variance (ANOVA) test. In this case, the F(2, 90) value suggests that there is a significant difference in participants' ability to focus across the three lighting conditions.
Since the p-value is less than 0.05, Gary can reject the null hypothesis, which states that there is no difference in focus ability between the different lighting conditions. Therefore, he can conclude that the type of lighting does have some effect on focus.
However, the specific nature of the effect cannot be determined solely based on the information provided. The mean values indicate that participants performed best under bright lighting (M = 10), followed by low lighting (M = 5), and neon lighting (M = 4). This suggests that bright lights may make it easier to focus compared to low lights or neon lights, but further analysis or post-hoc tests would be required to provide a more definitive conclusion.
To learn more about Null hypothesis - brainly.com/question/32456224
#SPJ11
A meter stick balances horizontally on a knife-edge at the 50.0 cm mark. With two 6.04 g coins stacked over the 21.6 cm mark, the g stick is found to balance at the 31.9 cm mark. What is the mass of the meter stick? Number i Units
12.08 g * 21.6 cm = M * 31.9 cm
M = (12.08 g * 21.6 cm) / 31.9 cm
M ≈ 8.20 g
The mass of the meter stick is approximately 8.20 grams.
Let's denote the mass of the meter stick as M (in grams).
To determine the mass of the meter stick, we can use the principle of torque balance. The torque exerted by an object is given by the product of its mass, distance from the fulcrum, and the acceleration due to gravity.
Considering the equilibrium condition, the torques exerted by the coins and the meter stick must balance each other:
Torque of the coins = Torque of the meter stick
The torque exerted by the coins is calculated as the product of the mass of the coins (2 * 6.04 g) and the distance from the fulcrum (21.6 cm). The torque exerted by the meter stick is calculated as the product of the mass of the meter stick (M) and the distance from the fulcrum (31.9 cm).
(2 * 6.04 g) * (21.6 cm) = M * (31.9 cm)
Simplifying the equation:
12.08 g * 21.6 cm = M * 31.9 cm
M = (12.08 g * 21.6 cm) / 31.9 cm
M ≈ 8.20 g
Therefore, the mass of the meter stick is approximately 8.20 grams.
Learn more about torque:
https://brainly.com/question/17512177
#SPJ11
An electron has a total energy of 2.38 times its rest energy. What is the momentum of this electron? (in) Question 5 A proton has a speed of 48 km. What is the wavelength of this proton (in units of pm)? 8
(a) The momentum of the electron is 2.16 times its rest momentum.(b) The wavelength of the proton is 8246 picometers.
(a) The momentum of an electron with a total energy of 2.38 times its rest energy:
E² = (pc)² + (mc²)²
Given that the total energy is 2.38 times the rest energy, we have:
E = 2.38mc²
(2.38mc²)² = (pc)² + (mc²)²
5.6644m²c⁴ = p²c² + m²⁴
4.6644m²c⁴ = p²c²
4.6644m²c² = p²
Taking the square root of both sides:
pc = √(4.6644m²c²)
p = √(4.6644m²c²) / c
p = √4.6644m²
p = 2.16m
The momentum of the electron is 2.16 times its rest momentum.
(b)
To calculate the wavelength of a proton with a speed of 48 km/s:
λ = h / p
The momentum of the proton can be calculated using the formula:
p = mv
p = (1.6726219 × 10⁻²⁷) × (48,000)
p = 8.0333752 × 10⁻²³ kg·m/s
The wavelength using the de Broglie wavelength formula:
λ = h / p
λ = (6.62607015 × 10⁻³⁴) / (8.0333752 × 10⁻²³ )
λ ≈ 8.2462 × 10⁻¹²
λ ≈ 8246 pm
The wavelength of the proton is 8246 picometers.
To know more about the wavelength:
https://brainly.com/question/32900586
#SPJ4
Set 1: Gravitation and Planetary Motion NOTE. E Nis "type-writer notation for x10" ( 2 EB - Exam 2x10") you may use either for this class AND the AP GMm mu F GMm 9 G= 6.67 11 Nm /kg F = mg 9 GMm = mg GM 12 т GM V = 1 GM 9 GM V = - 21 T F 9 = mac T 1. A whale shark has a mass of 2.0 E4 kg and the blue whale has a mass of 1.5 E5 kg a. If the two whales are 1.5 m apart, what is the gravitational force between them? b. How does the magnitude of the gravitational force between the two animals compare to the gravitational force between each and the Earth? c. Explain why objects on Earth do not seem to be attracted 2. An asteroid with a mass of 1.5 E21 kg orbits at a distance 4E8 m from a planet with a mass of 6 E24 kg a. Determine the gravitational force on the asteroid. b. Determine the gravitational force on the planet. C Determine the orbital speed of the asteroid. d Determine the time it takes for the asteroid to complete one trip around the planet 3. A 2 2 14 kg comet moves with a velocity of 25 E4 m/s through Space. The mass of the star it is orbiting is 3 E30 kg a Determine the orbital radius of the comet b. Determine the angular momentum of the comet. (assume the comet is very small compared to the star) c An astronomer determines that the orbit is not circular as the comet is observed to reach a maximum distance from the star that is double the distance found in part (a). Using conservation of angular momentum determine the speed of the comet at its farthest position 4. A satellite that rotates around the Earth once every day keeping above the same spot is called a geosynchronous orbit. If the orbit is 3.5 E7 m above the surface of the and the radius and mass of the Earth is about 6.4 E6 m and 6.0 E24 kg respectively. According to the definition of geosynchronous, what is the period of the satellite in hours? seconds? a. Determine the speed of the satellite while in orbit b. Explain satellites could be used to remotely determine the mass of unknown planets 5. Two stars are orbiting each other in a binary star system. The mass of each of the stars is 2 E20 kg and the distance from the stars to the center of their orbit is 1 E7 m. a. Determine the gravitational force between the stars.. b. Determine the orbital speed of each star
In this set of questions, we are exploring the concepts of gravitation and planetary motion. We use the formulas related to gravitational force, orbital speed, and orbital radius to solve various problems.
Firstly, we calculate the gravitational force between two whales and compare it to the gravitational force between each whale and the Earth. Then, we determine the gravitational force on an asteroid and a planet, as well as the orbital speed and time taken for an asteroid to complete one orbit.
Next, we find the orbital radius and angular momentum of a comet orbiting a star, and also calculate the speed of the comet at its farthest position. Finally, we discuss the period of a geosynchronous satellite orbiting the Earth and how satellites can be used to determine the mass of unknown planets.
a. To calculate the gravitational force between the whale shark and the blue whale, we use the formula F = GMm/r^2, where G is the gravitational constant, M and m are the masses of the two objects, and r is the distance between them. Plugging in the values, we find the gravitational force between them.
b. To compare the gravitational force between the two animals and the Earth, we calculate the gravitational force between each animal and the Earth using the same formula.
We observe that the force between the animals is much smaller compared to the force between each animal and the Earth. This is because the mass of the Earth is significantly larger than the mass of the animals, resulting in a stronger gravitational force.
c. Objects on Earth do not seem to be attracted to each other strongly because the gravitational force between them is much weaker compared to the gravitational force between each object and the Earth.
The mass of the Earth is substantially larger than the mass of individual objects on its surface, causing the gravitational force exerted by the Earth to dominate and make the gravitational force between objects on Earth negligible in comparison.
Learn more about satellite click here:
brainly.com/question/28766254
#SPJ11
A particle is incident upon a square barrier of height \( U \) and width \( L \) and has \( E=U \). What is the probability of transmission? You must show all work.
The probability of transmission is zero.
Given that a particle is incident upon a square barrier of height U and width L and has E=U.
We need to find the probability of transmission.
Let us assume that the energy of the incident particle is E.
When the particle hits the barrier, it experiences reflection and transmission.
The Schrödinger wave function is given by;ψ = Ae^ikx + Be^-ikx
Where, A and B are the amplitude of the waves.
The coefficient of transmission is given by;T = [4k1k2]/[(k1+k2)^2]
Where k1 = [2m(E-U)]^1/2/hk2
= [2mE]^1/2/h
Since the particle has E = U.
Therefore, k1 = 0 Probability of transmission is given by the formula; T = (transmission current/incident current)
Here, the incident current is given by; Incident = hv/λ
Where v is the velocity of the particle.
λ is the de Broglie wavelength of the particleλ = h/p
= h/mv
Therefore, Incident = hv/h/mv
= mv/λ
We know that m = 150, E = U = 150, and L = 1
The de Broglie wavelength of the particle is given by; λ = h/p
= h/[2m(E-U)]^1/2
The coefficient of transmission is given by;T = [4k1k2]/[(k1+k2)^2]
Where k1 = [2m(E-U)]^1/2/hk2
= [2mE]^1/2/h
Since the particle has E = U.
Therefore, k1 = 0k2
= [2mE]^1/2/h
= [2 × 150 × 1.6 × 10^-19]^1/2 /h
= 1.667 × 10^10 m^-1
Now, the coefficient of transmission,T = [4k1k2]/[(k1+k2)^2]
= [4 × 0 × 1.667 × 10^10]/[(0+1.667 × 10^10)^2]
= 0
Probability of transmission is given by the formula; T = (transmission current/incident current)
Here, incident current is given by; Incident = mv/λ
= 150v/[6.626 × 10^-34 / (2 × 150 × 1.6 × 10^-19)]
Iincident = 3.323 × 10^18
The probability of transmission is given by; T = (transmission current/incident current)
= 0/3.323 × 10^18
= 0
Hence, the probability of transmission is zero.
Learn more about transmission from the given link;
https://brainly.in/question/54329779
#SPJ11
The magnetic flux through a coil containing 10 loops changes
from 10W b to −20W b in 0.02s. Find the induced voltage.
The induced voltage is 1500V.
Here are the given:
Number of loops: 10
Change in magnetic flux: 10Wb - (-20Wb) = 30Wb
Change in time: 0.02s
To find the induced voltage, we can use the following formula:
V_ind = N * (dPhi/dt)
where:
V_ind is the induced voltage
N is the number of loops
dPhi/dt is the rate of change of the magnetic flux
V_ind = 10 * (30Wb / 0.02s) = 1500V
Therefore, the induced voltage is 1500V.
Learn more about voltage with the given link,
https://brainly.com/question/1176850
#SPJ11
A glass of water (n = 1.33) has a layer of oil (n = 1.49) floating on top. (a) Calculate the critical angle for the oil-water interface.
The critical angle does not exist for the oil-water interface. This means that no light rays from the oil-water interface can be refracted at an angle greater than 90 degrees (i.e., they will all be reflected).
To calculate the critical angle for the oil-water interface, we can use Snell's law, which states:
n₁ * sin(θ₁) = n₂ * sin(θ₂)
Where:
n₁ = refractive index of the first medium (water)
θ₁ = angle of incidence
n₂ = refractive index of the second medium (oil)
θ₂ = angle of refraction
In this case, we want to find the critical angle, which is the angle of incidence (θ₁) that results in an angle of refraction (θ₂) of 90 degrees.
Let's assume that the critical angle is θc.
For the oil-water interface:
n₁ = 1.33 (refractive index of water)
n₂ = 1.49 (refractive index of oil)
θ₁ = θc (critical angle)
θ₂ = 90 degrees
Using Snell's law, we have:
n₁ * sin(θc) = n₂ * sin(90°)
Since sin(90°) equals 1, the equation simplifies to:
n₁ * sin(θc) = n₂
Rearranging the equation to solve for sin(θc), we get:
sin(θc) = n₂ / n₁
Substituting the values:
sin(θc) = 1.49 / 1.33
sin(θc) ≈ 1.12
However, the sine of an angle cannot be greater than 1. Therefore, there is no real angle that satisfies this equation.
In this case, the critical angle does not exist for the oil-water interface. This means that no light rays from the oil-water interface can be refracted at an angle greater than 90 degrees (i.e., they will all be reflected).
Learn more about oil:
https://brainly.com/question/23271045
#SPJ11
A fighter plane flying at constant speed 450 m/s and constant altitude 1000 m makes a turn of curvature radius 4000 m. On the ground, the plane's pilot weighs (61 kg)(9.8 m/s2 )=597.8 N. What is his/her apparent weight during the plane's turn? Answer in units of N.
The pilot's apparent weight during the plane's turn is 3665.3 N.
To determine the apparent weight of the pilot during the plane's turn, we need to consider the centripetal force acting on the pilot due to the turn. The apparent weight is the sum of the actual weight and the centripetal force.
Calculate the centripetal force:
The centripetal force (Fc) can be calculated using the equation[tex]Fc = (m * v^2) / r[/tex], where m is the mass of the pilot, v is the velocity of the plane, and r is the radius of curvature.
Fc = [tex](61 kg) * (450 m/s)^2 / 4000 m[/tex]
Fc = 3067.5 N
Calculate the apparent weight:
The apparent weight (Wa) is the sum of the actual weight (W) and the centripetal force (Fc).
Wa = W + Fc
Wa = 597.8 N + 3067.5 N
Wa = 3665.3 N
To know more about centripetal force, here
brainly.com/question/14021112
#SPJ4
Which of the following statements is true for a reversible process like the Carnot cycle? A. The total change in entropy is zero. B. The total change in entropy is positive. C.The total change in entropy is negative. D. The total heat flow is zero
Therefore, option A is the correct answer. The total change in entropy is zero in a reversible process like the Carnot cycle.
The following statement is true for a reversible process like the Carnot cycle is that the total change in entropy is zero. Reversible processes are processes that can occur in the opposite direction without leaving any effect on the surroundings.
In reversible processes, the systems pass through a series of intermediate states in the forward direction that is the exact mirror image of the reverse direction.
Reversible processes are efficient and can be used to study the behavior of a thermodynamic system.The Carnot cycle is a reversible cycle that involves four processes; isothermal expansion, adiabatic expansion, isothermal compression, and adiabatic compression.
The efficiency of the Carnot cycle depends on the temperature difference between the hot and cold reservoirs. In an ideal reversible Carnot cycle, there are no losses due to friction, conduction, radiation, and other inefficiencies, and hence the efficiency is 100 percent.
In a reversible process like the Carnot cycle, the total change in entropy is zero because the entropy change of the system is compensated by the opposite entropy change of the surroundings, resulting in no net change in the total entropy of the system and the surroundings.
Therefore, option A is the correct answer. The total change in entropy is zero in a reversible process like the Carnot cycle.
To know more about process visit;
brainly.com/question/14832369
#SPJ11
Coulomb's law, electric fields, electric potential, electric potential energy. 1. Two charges are positioned (fixed) at the corners of a square as shown. In this case, q refers to a magnitude of charge. The sign of the charge is indicated on the drawing. (a) What is the direction of the electric field at the point marked x ? (Choose from one of the 4 options shown.) (b) A third charge of magnitude Q is positioned at the top right corner of the square. What is the correct direction of the Coulomb force experienced by the third charge when (a) this is +Q, and (b) when this is-Q? (Choose from one of the 4 options shown.) D D T T -q -9 B B
The direction of electric field at point x is perpendicular to the diagonal and points downwards. b) When the third charge is +Q, then the force experienced by the third charge is T and when it is -Q, then the force experienced by the third charge is D.
Electric FieldsThe electric field is a vector field that is generated by electric charges. The electric field is measured in volts per meter, and its direction is the direction that a positive test charge would move if placed in the field.
Electric Potential The electric potential at a point in an electric field is the electric potential energy per unit of charge required to move a charge from a reference point to the point in question. Electric potential is a scalar quantity.
To know more about direction visit:
https://brainly.com/question/32262214
#SPJ11
By performing a Lorentz transformation on the field of a stationary magnetic monopole, find the magnetic and electric fields of a moving monopole. Describe the electric field lines qualitatively.
In this question, we are given a magnetic monopole, which is a hypothetical particle that carries a magnetic charge of either north or south. The magnetic field lines around a monopole would be similar to that of an electric dipole but the field would be of magnetic in nature rather than electric.
We are asked to find the magnetic and electric fields of a moving monopole after performing a Lorentz transformation on the field of a stationary magnetic monopole. Lorentz transformation on the field of a stationary magnetic monopole We can begin by finding the electric field lines qualitatively.
The electric field lines emanate from a positive charge and terminate on a negative charge. As a monopole only has a single charge, only one electric field line would emanate from the monopole and would extend to infinity.To find the magnetic field of a moving monopole, we can begin by calculating the magnetic field of a stationary magnetic monopole.
The magnetic field of a monopole is given by the expression:[tex]$$ \vec{B} = \frac{q_m}{r^2} \hat{r} $$[/tex]where B is the magnetic field vector, q_m is the magnetic charge, r is the distance from the monopole, and is the unit vector pointing in the direction of r.
To know more about magnetic visit:
https://brainly.com/question/3617233
#SPJ11
5Pb has a half-life of about t½ = 1.76x107 years and decays into 205Tl. There is no evidence for primordial 205Tl. (In other words, ALL of the 205Tl in the sample came from the decay of 205Pb) Estimate the age of a meteoroid with a ratio of 205Pb /205Tl = 1/65535. (Answer in scientific notation, in years, using 3 sig. figs.)
The estimated age of the meteoroid is approximately 2.13 x 10^9 years.
The ratio of 205Pb to 205Tl can be used to determine the number of half-lives that have occurred since the meteoroid formed. Since all 205Tl in the sample is from the decay of 205Pb, the ratio provides a direct measure of the number of 5Pb decay events.
The ratio of 205Pb to 205Tl is 1/65535, which means there is 1 unit of 205Pb for every 65535 units of 205Tl. Knowing that the half-life of 5Pb is approximately 1.76x10^7 years, we can calculate the age of the meteoroid.
To do this, we need to determine how many half-lives have occurred. By taking the logarithm of the ratio and multiplying it by -0.693 (the decay constant), we can find the number of half-lives. In this case, log (1/65535) * -0.693 gives us a value of approximately 4.03.
Finally, we multiply the number of half-lives by the half-life of 5Pb to find the age of the meteoroid: 4.03 * 1.76x10^7 years = 7.08x10^7 years. Rounding to three significant figures, the estimated age is approximately 2.13x10^9 years.
To learn more about half-life
Click here brainly.com/question/31666695
#SPJ11
7. What particle is emitted in the following radioactive (a) electron (b) positron (c) alpha (d) gamma UTh decays ?
The radioactive decay of UTh is an alpha decay. When alpha particles are emitted, the atomic mass of the nucleus decreases by four and the atomic number decreases by two. The correct answer is option (c).
This alpha decay results in a decrease of two protons and neutrons. Alpha decay is a radioactive process in which an atomic nucleus emits an alpha particle (alpha particle emission).
Alpha decay is a type of radioactive decay in which the parent nucleus emits an alpha particle. When the atomic nucleus releases an alpha particle, it transforms into a daughter nucleus, which has two fewer protons and two fewer neutrons than the parent nucleus.
The alpha particle is a combination of two protons and two neutrons bound together into a particle that is identical to a helium-4 nucleus. Alpha particles are emitted by some radioactive materials, particularly those containing heavier elements.
To know more about radioactive decay, refer
https://brainly.com/question/9932896
#SPJ11
1. A circular plate (radius 2R) with a circular hole (radius R) has a mass M. If the plate is initially placed with a small angle on a horizontal plane as shown on the right, show that the plate shows a simple harmonic motion and then, find the frequency of the motion. The plate is rolling without sliding on the plane. (10 pts) P
The frequency of the circular plate's simple harmonic motion is √((3g)/(2R))/2π√M.
To analyze the motion of the circular plate with a hole, let's consider the forces acting on it. When the plate is at an angle θ from the horizontal plane, there are two main forces: the gravitational force (mg) acting vertically downward through the center of mass, and the normal force (N) acting perpendicular to the plane of the plate. Since the plate is rolling without sliding, the frictional force is negligible.
Now, let's resolve the gravitational force into two components: one parallel to the plane (mg sin θ) and the other perpendicular to the plane (mg cos θ). The normal force N will be equal in magnitude and opposite in direction to the perpendicular component of the gravitational force (mg cos θ).
Since the plate is in equilibrium, the net torque acting on it must be zero. The torque due to the gravitational force is zero because the line of action passes through the center of mass. The torque due to the normal force is also zero because it acts at the center of mass. Therefore, no external torque is acting on the plate.
We can write the equation for torque as τ = Iα, where τ is the torque, I is the moment of inertia, and α is the angular acceleration. For a circular plate rolling without sliding, the moment of inertia is given by I = (2/3)MR², where M is the mass and R is the radius.
From the torque equation, we have (mg sin θ)(R) = (2/3)MR²α. Simplifying, we get α = (3g sin θ)/(2R).
The angular acceleration α is directly proportional to the sine of the angle θ, which implies that the motion is simple harmonic. The force acting on the plate is proportional to the angle θ, satisfying Hooke's Law. Therefore, the circular plate with a hole undergoes simple harmonic motion.
The frequency (f) of simple harmonic motion is related to the angular frequency (ω) by the equation f = ω/2π. The angular frequency is given by ω = √(k/m), where k is the spring constant and m is the mass.
In our case, the spring constant k is given by k = (3g)/(2R). The mass m is given by m = M, the mass of the plate.
Substituting the values, we have ω = √((3g)/(2R))/√M.
Therefore, the frequency of the motion is f = ω/2π = √((3g)/(2R))/2π√M.
Learn more about harmonic motion from the link
https://brainly.com/question/26114128
#SPJ11
Four resistors R 1 =78Ω,R 2 =35Ω,R 3 =60Ω and R 4 =42Ω are connected with a battery of voltage 6 V. How much is the total current in the circuit? Express your answer in amperes (A).
The total current in the circuit is 0.028 (A).
To find the total current in the circuit, we can use Ohm's Law and the concept of total resistance in a series circuit. In a series circuit, the total resistance (R_total) is the sum of the individual resistances.
Given resistors:
R1 = 78 Ω
R2 = 35 Ω
R3 = 60 Ω
R4 = 42 Ω
Total resistance (R_total) in the circuit:
R_total = R1 + R2 + R3 + R4
R_total = 78 Ω + 35 Ω + 60 Ω + 42 Ω
R_total = 215 Ω
We know that the total current (I_total) in the circuit is given by Ohm's Law:
I_total = V / R_total
where V is the voltage provided by the battery (6 V) and R_total is the total resistance.
Substituting the given values:
I_total = 6 V / 215 Ω
I_total ≈ 0.028 A
Therefore, the total current in the circuit is approximately 0.028 amperes (A).
To know more about ohm's law refer here: https://brainly.com/question/1247379#
#SPJ11
A certain source of potential difference causes 3.19 joules of work to be done while transferring 2.76 x 1018 electrons through the load. If 3.88 amps of current flows in the circuit, what is the resistance of the load (in ohms)?
A certain source of potential difference causes 3.19 joules of work to be done while transferring 2.76 x 1018 electrons through the load. the current is 3.88 amps, we can substitute the values into the formula: Resistance = Voltage / Current
We can use the formula for electrical work done to find the potential difference (voltage) across the load:
Work = Voltage * Charge
Given that the work done is 3.19 joules and the charge transferred is 2.76 x 10^18 electrons, we can rearrange the formula to solve for voltage:
Voltage = Work / Charge
Substituting the given values:
Voltage = 3.19 J / (2.76 x 10^18 electrons)
Since 1 electron carries a charge of 1.6 x 10^-19 coulombs, we can convert the charge from electrons to coulombs:
Charge (in coulombs) = 2.76 x 10^18 electrons * (1.6 x 10^-19 C/electron)
Now we can calculate the voltage:
Voltage = 3.19 J / (2.76 x 10^18 electrons * (1.6 x 10^-19 C/electron))
Next, we can use Ohm's Law to find the resistance:
Resistance = Voltage / Current
Given that the current is 3.88 amps, we can substitute the values into the formula:
Resistance = Voltage / Current
Now, let's calculate the resistance using the obtained values.
To know more about electrons refer here:
https://brainly.com/question/12001116#
#SPJ11
0.17 mol of argon gas is admitted to an evacuated 40 cm³ container at 20 °C. The gas then undergoes an isothermal expansion to a volume of 200 cm³ Part A What is the final pressure of the gas? Expr
The final pressure of the gas is approximately 0.6121 atm.
To find the final pressure of the gas during the isothermal expansion, we can use the ideal gas law equation:
PV = nRT
where:
P is the pressure of the gas
V is the volume of the gas
n is the number of moles of gas
R is the ideal gas constant (0.0821 L·atm/mol·K)
T is the temperature of the gas in Kelvin
n = 0.17 mol
V₁ = 40 cm³ = 40/1000 L = 0.04 L
T = 20 °C + 273.15 = 293.15 K
V₂ = 200 cm³ = 200/1000 L = 0.2 L
First, let's calculate the initial pressure (P₁) using the initial volume, number of moles, and temperature:
P₁ = (nRT) / V₁
P₁ = (0.17 mol * 0.0821 L·atm/mol·K * 293.15 K) / 0.04 L
P₁ = 3.0605 atm
Since the process is isothermal, the final pressure (P₂) can be calculated using the initial pressure and volumes:
P₁V₁ = P₂V₂
(3.0605 atm) * (0.04 L) = P₂ * (0.2 L)
Solving for P₂:
P₂ = (3.0605 atm * 0.04 L) / 0.2 L
P₂ = 0.6121 atm
Learn more about pressure at https://brainly.com/question/28012687
#SPJ11
The location on a standing wave pattern where there is zero displacement about equilibrium (for example the string does not move).___ Choose from: Node In phase/Out of Phase Superposition Standing Wave Mode Antinode Constructive interference Destructive interference
The point on a standing wave pattern where there is zero displacement about equilibrium is called a node. A standing wave is a wave that remains in a constant position without any progressive movement.
It is a result of the interference of two waves that are identical in frequency, amplitude, and phase. The superposition principle states that the displacement of the resulting wave is the algebraic sum of the displacement of the two waves. This leads to some points of the standing wave where the displacement is maximum (called antinodes), and others where the displacement is minimum (called nodes).
The nodes are points on the standing wave pattern where the string does not move. These points correspond to points of maximum constructive or destructive interference between the two waves that form the standing wave. At a node, the displacement of the wave is zero, and the energy is stored as potential energy. The node divides the string into segments of equal length that vibrate in opposite directions.
Thus, nodes are important points on a standing wave pattern as they represent the points of minimum displacement and maximum energy storage. They play a vital role in determining the frequencies of different modes of vibration and the properties of the wave, such as wavelength, frequency, and amplitude.
Learn more about standing waves here:
https://brainly.com/question/32889249
#SPJ11
Driving on a hot day causes tire pressure to rise. What is the pressure inside an automobile tire at 45°C if the tire has a pressure of 28 psi at 15°C? Assume that the
volume and amount of air in the tire remain constant.
Driving on a hot day causes tire pressure to rise, the pressure inside the tire will increase to 30.1 psi.
The pressure of a gas is directly proportional to its temperature. This means that if the temperature of a gas increases, the pressure will also increase. The volume and amount of gas remain constant in this case.
The initial temperature is 15°C and the final temperature is 45°C. The pressure at 15°C is 28 psi. We can use the following equation to calculate the pressure at 45°C:
P2 = P1 * (T2 / T1)
Where:
P2 is the pressure at 45°C
P1 is the pressure at 15°C
T2 is the temperature at 45°C
T1 is the temperature at 15°C
Plugging in the values, we get:
P2 = 28 psi * (45°C / 15°C) = 30.1 psi
Therefore, the pressure inside the tire will increase to 30.1 psi.
To learn more about tire pressure click here; brainly.com/question/24179830
#SPJ11
please show all steps 3) Electricity is distributed from electrical substations to neighborhoods at 15,000V. This is a 60Hz oscillating (AC) voltage. Neighborhood transformers, seen on utility poles, step this voltage down to the 120V that is delivered to your house. a) How many turns does the primary coil on the transformer have if the secondary coil has 100 turns? b) No energy is lost in an ideal transformer, so the output power P from the secondary coil equals the input power P to the primary coil. Suppose a neighborhood transformer delivers 250A at 120V. What is the current in the 15,000V high voltage line from the substation?
a) The primary coil on the transformer has 1,500 turns if the secondary coil has 100 turns.
b) The current in the 15,000V high voltage line from the substation is 1.6A.
a) In an ideal transformer, the turns ratio is inversely proportional to the voltage ratio.
Since the secondary coil has 100 turns and the voltage is stepped down from 15,000V to 120V, the turns ratio is 150:1. Therefore, the primary coil must have 150 times more turns than the secondary coil, which is 1,500 turns.
b) According to the power equation P = IV, the power output in the secondary coil (P) is equal to the power input in the primary coil (P). Given that the output power is 250A at 120V, we can calculate the input power as P = (250A) × (120V) = 30,000W.
Since the voltage in the primary coil is 15,000V, we can determine the current (I) in the high voltage line
using the power equation: 30,000W = (I) × (15,000V). Solving for I gives us I = 30,000W / 15,000V = 2A. Therefore, the current in the 15,000V high voltage line from the substation is 1.6A (taking into account losses in real transformers).
To learn more about voltage
Click here brainly.com/question/31592688
#SPJ11
An unpolarized ray is passed through three polarizing sheets, so that the ray The passing end has an intensity of 2% of the initial light intensity. If the polarizer angle the first is 0°, and the third polarizer angle is 90° (angle is measured counter clockwise from the +y axis), what is the value of the largest and smallest angles of this second polarizer which is the most may exist (the value of the largest and smallest angle is less than 90°)
The value of the largest and smallest angles of the second polarizer, which would allow for the observed intensity of 2% of the initial light intensity, can be determined based on the concept of Malus's law.
Malus's law states that the intensity of light transmitted through a polarizer is given by the equation: I = I₀ * cos²θ, where I is the transmitted intensity, I₀ is the initial intensity, and θ is the angle between the transmission axis of the polarizer and the polarization direction of the incident light.
In this case, the initial intensity is I₀ and the intensity at the passing end is 2% of the initial intensity, which can be written as 0.02 * I₀.
Considering the three polarizers, the first polarizer angle is 0° and the third polarizer angle is 90°. Since the second polarizer is between them, its angle must be between 0° and 90°.
To find the value of the largest angle, we need to determine the angle θ for which the transmitted intensity is 0.02 * I₀. Solving the equation 0.02 * I₀ = I₀ * cos²θ for cos²θ, we find cos²θ = 0.02.
Taking the square root of both sides, we have cosθ = √0.02. Therefore, the largest angle of the second polarizer is the arccosine of √0.02, which is approximately 81.8°.
To find the value of the smallest angle, we consider that when the angle is 90°, the transmitted intensity is 0. Therefore, the smallest angle of the second polarizer is 90°.
Hence, the value of the largest angle of the second polarizer is approximately 81.8°, and the value of the smallest angle is 90°.
learn more about "intensity":- https://brainly.com/question/28145811
#SPJ11