1. The equation for the reaction between zinc and aqueous copper(II) sulfate is shown.

Zn + Cuso, → ZnSO, + Cu

Which statement is correct?

a. The oxidation state of the oxidising agent has changed from 0 to +2.

b. The oxidation state of the reducing agent has changed from 0 to +2.

c. The oxidation state of the reducing agent has changed from +2 to 0

d. This is not a redox reaction. The solution changes from colourless to blue.

Answer:

[tex]n=1.732mol[/tex]

[tex]\% N=18.7\%[/tex]

Explanation:

Hello!

In this case, since the molecular formula of glycine is C₂H₅NO₂, we realize that the molar mass is 75.07 g/mol; thus, the moles in 130.0 g of glycine are:

[tex]n=130.0g*\frac{1mol}{75.07 g}\\\\ n=1.732mol[/tex]

Furthermore, we can notice 75.07 grams of glycine contains 14.01 grams of nitrogen; thus, the percent nitrogen turns out:

[tex]\% N=\frac{14.01}{75.07}*100\% \\\\\% N=18.7\%[/tex]

Best regards!

Answer:

The total change in enthalpy for the reaction is - 81533.6 J/mol

Explanation:

Given the data in the question;

Reaction;

HCl + NaOH → NaCl + H₂O

Where initial temperature is 21.2 °C and final temperature is 28.0 °C. Ccal is 1234.28 J

Moles of NaOH  = 50.mL × 1.00 M = 50.0 mmol = 0.0500 mol

Moles of HCl = 50.mL × 1.00 M = 50.0 mmol = 0.0500 mol

so, 0.0500 moles of H₂O produced

Volume of solution = 50.mL  +  50.mL  = 100.0 mL

Mass of solution m = volume × density = 100.0mL × 1.0 g/mL = 100 g

now ,

Heat energy of Solution q= (mass × specific heat capacity × temp Δ) + Cal

we know that; The specific heat of water(H₂O) is 4.18 J/g°C.

so we substitute

q_soln = (100g × 4.18 × ( 28.0 °C - 21.2 °C) ) + 1234.28

q_soln = 2842.4 + 1234.28

q_soln = 4076.68 J

Enthalpy change for the neutralization is ΔH[tex]_{neutralization}[/tex]

ΔH[tex]_{neutralization}[/tex] = -q_soln / mole of water produced

so we substitute

ΔH[tex]_{neutralization}[/tex] = -( 4076.68 J ) / 0.0500 mol  

ΔH[tex]_{neutralization}[/tex] = - 81533.6 J/mol

Therefore, the total change in enthalpy for the reaction is - 81533.6 J/mol

Answer:

the de Broglie wavelength of one of the electrons is 5.3787 × 10⁻¹¹ m

Explanation:

Given the data in the question;

we know that; ( electron volt ) 1 eV = 1.602 × 10⁻¹⁹ J

so given that Kinetic Energy KE = 520 eV

KE = 520 × 1.602 × 10⁻¹⁹ = 8.3304 × 10⁻¹⁷ J

we know that;

Kinetic Energy = 1/2 × mv²

where m is the electron mass

and mass of electron is  9.109 × 10⁻³¹ kilograms

so

8.3304 × 10⁻¹⁷ = 1/2 × 9.109 × 10⁻¹⁷× v²

v = √[(8.3304 × 10⁻¹⁷) / (1/2 × 9.109 × 10⁻³¹)]

v = 1.3524 × 10⁷ m/s

speed of the electron v = 1.3524 × 10⁷ m/s

now, de Broglie equation;

wavelength λ = h / mv

where h is Planck constant ( 6.626 × 10⁻³⁴ m² kg / s )

so we substitute

wavelength λ = 6.626 × 10⁻³⁴ / ( 9.109 × 10⁻³¹ × 1.3524 × 10⁷)

wavelength λ = 5.3787 × 10⁻¹¹ m

Therefore, the de Broglie wavelength of one of the electrons is 5.3787 × 10⁻¹¹ m

Answer:

A: Helium or Hydrogen

Explanation:

Terrestrial planets are the 4 inner most planets of the solar system which are mercury, venus, earth, Mars, while the giant planets are the 4 outer most which are Jupiter, Saturn, Uranus and Neptune.

Now, these outer most ones are the surface ones and are surrounded primarily by layers of hydrogen and helium gases.

Answer:

b

Explanation:

Combinations between two strands:

T - A

A - T

C - G

G - C

(so if one strand has A for example, then the other strand must have T in the same spot)

Bases   which are present on the other strand of DNA are TAT.

DNA or deoxyribonucleic acid is a hereditary material present in humans as well as all living beings. Almost every cell present in the body has DNA. Most DNA are located inside the cell , that is in the nucleus of the cell. But a small portion of DNA  can be found in the mitochondria of the cell as well.

The information in DNA is stored as a code which is composed of four chemical bases 1) adenine 2)guanine 3) cytosine  4) thymine . The human DNA consists of 3 billion bases . The order of of these bases determine information which is used for building and maintaining an organism.

The DNA bases can pair with each other .Adenine pairs with thymine   and guanine with cytosine to form units which are called as base pairs.Each base apart from other complementary base it also attaches itself to a sugar and a phosphate molecule.

Learn more about DNA ,here:

https://brainly.com/question/22499464

#SPJ6

Explanation:

Molar mass

96.09 g/mol

glad to help....

Answer:

Forgive me if im wrong but i am pretty sure the answer is C

Explanation:

Answer:4.2 6.4 6.7 9.5 5.5 3.8

Explanation:

Answer:

B

Explanation:

Most planets in the solar system don't have water. Helium and hydrogen are two of the many gasses in planets. Therefore, B is the best answer.

Answer:

60.88%

Explanation:

The balanced equation of the reaction is given as;

2 AgNO3 (aq) + BaCl2 (aq) → 2 AgCl (s) + Ba(NO3)2 (aq)

Since AgNO3 is in excess, the limiting reactant is BaCl2. From the reaction;

1 mol of BaCl2 produces 2 mol of AgCl

Converting to masses;

Mass = Number of mol * Molar mass

BaCl2;

Mass = 1 * 208.23 g/mol = 208.23 g

AgCl;

Mass = 2 * 143.32 g/mol = 286.64 g

208.23 g BaCl2 produces 286.64 g of AgCl

x g BaCl2 produces 7.123 g of AgCl

Solving for x;

x = 7.123 * 208.23 / 286.64 = 5.1745 g

Mass percent = Mass / Total mass of Mixture  * 100

Mass Percent = 5.1745 / 8.500 = 0.6088 * 100 = 60.88%

Answer:

The correct one is dynamite fishing

Answer: Rate of disappearance of [tex]N_2[/tex]= 0.032 M/s

Rate of disappearance of [tex]H_2[/tex] = 0.096 M/s

Explanation:

Rate law says that rate of a reaction is directly proportional to the concentration of the reactants each raised to a stoichiometric coefficient determined experimentally called as order.

[tex]N_2(g)+3H_2(g)\rightarrow 2NH_3(g)[/tex]

The rate in terms of reactants is given as negative as the concentration of reactants is decreasing with time whereas the rate in terms of products is given as positive as the concentration of products is increasing with time.

Rate in terms of disappearance of [tex]N_2[/tex] = [tex]-\frac{1d[N_2]}{dt}[/tex]

Rate in terms of disappearance of [tex]H_2[/tex] = [tex]-\frac{1d[H_2]}{3dt}[/tex]

Rate in terms of appearance of [tex]NH_3[/tex] = [tex]\frac{1d[NH_3]}{2dt}[/tex]

Rate = [tex]-\frac{1d[N_2]}{dt}=-\frac{1d[H_2]}{3dt}=\frac{1d[NH_3]}{2dt}[/tex]

Given : = 0.032 M/s

Rate of disappearance of =

Rate of disappearance of [tex]H_2[/tex] = [tex]-\frac{d[H_2]}{dt}=3\times 0.032M/s=0.096M/s[/tex]

Answer:

Step 1 should be convert atoms to moles (n). Step 2 should be convert moles (n) to mass (m).

Step 1

Use dimensional analysis to convert the number of atoms to moles.

1 mole atoms = 6.022 × 10²³ atoms

n(Ag) = 2.3 × 10²⁴ Ag atoms × (1 mol Ag/6.022 × 10²³ Ag atoms) = 3.8193 mol Ag

Step 2

Convert the moles of Ag to mass.

mass (m) = moles (n) × molar mass (M)

n(Ag) = 3.8193 mol Ag

M(Ag) = atomic weight on the periodic table in g/mol = 107.868 g Ag/mol Ag

m(Ag) = 3.8193 mol × 107.868 g/mol = 412 g Ag = 410 g Ag rounded to two significant figures

The mass of 2.3 × 10²⁴ Ag atoms is approximately 410 g.

Explanation:

The number of moles that are present is 2.3 × 10²⁴ atoms of silver are 3.8193 moles that can be determined using Avogadro's law.

One mole:

A mole is defined as 6.022 × 10²³ of some chemical unit, be it atoms, molecules, ions, or others.

1 mole = 6.022 × 10²³ atoms

n(Ag) = 2.3 × 10²⁴ Ag atoms × (1 mol Ag/6.022 × 10²³ Ag atoms)

n(Ag) = 3.8193 mol Ag

Thus, the number of moles is 3.8193 moles.

Find more information about one mole here:

brainly.com/question/1358482

Answer:

The average speed must be 30mph so this means the car traveled for 2hrs 60/30

Answer:

the distillate (D) and the bottoms (B) products flow rates are;

B = 72.1875 kmol/hr

D = 37.8125 kmol/hr

Explanation:

Given the data in the question;

as illustrated in the image below;

F1 stream, ( 90 kmol/hr ) contains 42 mol% p-xylene and Feed 2 ( 20 kmol/hr) contains 9mol% p-xylene, so;

more volatile → p-xylene

less volatile → o-xylene

now, Overall balance;

F1 + F2 = D + B

90 + 20 = D + B

D + B = 110    ------------- let this be equation 1

p-xylene. component balance;

0.42F1 + 0.09F2 = 0.99D +  0.03B

0.42(90) + 0.09(20) = 0.99D +  0.03B

37.8 + 1.8 = 0.99D +  0.03B

0.99D +  0.03B = 39.6 --------------- let this be equation 2

from equation 1 and 2

input (D = 110 - B) into equation 2

0.99(110 - B) +  0.03B = 39.6

108.9 - 0.99B + 0.03B = 39.6

108.9 - 39.6 = 0.99B - 0.03B

69.3 = 0.96B

B = 69.3 / 0.96

B = 72.1875

now, input B = 72.1875 into equation 1

D + B = 110

D + 72.1875 = 110

D = 110 - 72.1875

D = 37.8125

Therefore, the distillate (D) and the bottoms (B) products flow rates are;

B = 72.1875 kmol/hr

D = 37.8125 kmol/hr

Answer:

d. a brittle solid.

Explanation:

Hello!

In this case, since cesium fluoride is widely known as an ionic compound due to the large electronegativity difference, it is possible to discard a. due to its crystalline structure, b. because conducting solids are metals, c. because ionic compounds are not likely to be gases and e. because even when it is soluble in water, the problem is not referring to an aqueous solution; therefore, the answer is d. a brittle solid.

Best regards!

Answer:

1. H2 + Cl2 => 2HCl

2. Na2S + 2HCl => 2NaCl + H2S

3. 6HCl + 2Al => 2AlCl3 + 3H2

4. C3H8 + 5O2 => 3CO2 + 4H2O

5. C6H12O6 + 6O2 => 6CO2 + 6H2O

6. 4C12H23O11 + 49O2 => 48CO2 + 46H2O

7. 4NH3 + 7O2 => 4NO2 + 6H2O

8. 2Mg + 02 => 2MgO

hope it helps

Answer:

Fact: There’s only one letter that doesn’t appear in any U.S. state name

And that is Q

Explanation:

Answer:

0.012 M

Explanation:

Step 1: Given and required data

Step 2: Calculate the moles (n) of solute (KCl)

We will use the following expression.

n = m/M = 0.64 g / (74.553 g/mol) = 8.6 × 10⁻³ mol

Step 3: Calculate the molar concentration (C) of the solution

The molarity is equal to the moles of solute divided by the liters of solution.

C = 8.6 × 10⁻³ mol/0.725 L = 0.012 M

Answer:

Fe + H(C2H3O2) ........

Answer:

true

Explanation:

it is because hormone determines various factors

28 mol CaF

Math

Pre-Algebra

Order of Operations: BPEMDAS

Chemistry

Atomic Structure

Stoichiometry

Step 1: Define

[Given] 1.7 × 10²⁵ molecules CaF

[Solve] moles CaF

Step 2: Identify Conversions

Avogadro's Number

Step 3: Convert

Step 4: Check

Follow sig fig rules and round. We are given 2 sig figs.

28.2298 mol CaF ≈ 28 mol CaF

Answer:

Ammonia

Explanation:

Both amines and amides are structurally similar to ammonia, the difference is the introduction of a carbon into the structure.

Answer:

c. water is added to coffe until the solution becomes clear

Answer:

c

Explanation:

Water is added to coffee until the solution becomes

clear.

Answer:

Explanation:

Para mejor entendimiento, reeescribiremos la ley que pusiste:

S = 64t - 8t²    (1)

De acuerdo al enunciado del problema, S tiene unidades de pie y t en segundos, por lo tanto, S, que se refiere a la posición o altura alcanza de la piedra, puede ser determinado usando esa expresión a tiempos específicos.

Para el calculo de velocidad usamos la siguiente expresión:

V = -g * t     (2)      g: 32.16 ft/s

Tomando en cuenta estas expresiones, veamos los valores de posición y velocidad:

a) Para t = 2 s

S = 64(2) - 8(2)²

S = 96 ft

V = -32.16 * 2

V = -64.32 ft/s

Para t = 3 s

S = 64(3) - 8(3)²

S = 120 ft

V = -32.16 * 3

V = -96.48 ft/s

b) Para saber la altura que alcanzará, usamos la expresión de altura máxima que es la siguiente:

Smáx = -V₀² / 2g   (3)

Para el valor de la velocidad inicial, podemos asumir el valor de la velocidad dada por la formula de la ley S, que es 64. Esto porque al ser multiplicado por el valor del tiempo, queda en unidades de distancia, asi que este valor debe tener unidades de velocidad. Reemplazando este valor en la expresión:

Smáx = -(64)² / 2 * 32.16

Smáx = 63.68 ft

c) Para esta parte, usamos nuevamente la formula de la ley S, usando t = 4 s y listo:

S = 64(4) - 8(16)

S = 128 ft

Espero te sirva

Answer:

d)

Explanation:

in one mole of phosphoric acid you have 3 mol hydrogen, 2 mol phosphorus, and 4 mol oxygen. just multiply everything by 2 and you get 2 mol of phosphoric acid

Answer:

2. A 3.C

Explanation: