1) Consider the following demand curve for good X which is produced by Firm 1 and 2:
Price= 100-2*Q1-Q2
The cost function for firm 1 is:
Total Cost = 2*Q1^2
and the cost for firm 2 is:
Total Cost = 3*Q2^2
A- If both firms agree to work together and maximize joint profits it would result in a market price of ______
B- If both firms competed with each other, it would result in a market price of ____________. To answer your question assume the following "best response" functions.
Q1 = (100-Q2)/8
Q2 = (100-2*Q2)/8

In the early years of a mortgage, payments are mostly allocated towards interest, while in the later years, they are mostly allocated towards the principal.

A mortgage is a type of loan used to purchase a property that is repaid through monthly payments over a set period, typically 15 or 30 years. These payments consist of both the principal amount borrowed and the interest charged for borrowing the money. The proportion of each component in every payment changes over time according to an amortization schedule.

At the beginning of the mortgage term, a larger portion of the payment goes towards interest, as the outstanding principal balance is higher. As payments are made, the principal balance decreases, and as a result, the interest portion of each payment becomes smaller. Toward the end of the mortgage term, the principal portion of the payment becomes larger since most of the interest has already been paid off.

This process of amortization guarantees that the loan will be fully repaid by the end of the mortgage term. Therefore, as time passes, there will be a gradual shift in the payment allocation, with mortgage payments primarily allocated to interest in the early years and to the principal in the later years.

Know more about mortgage click here;

https://brainly.com/question/31751568

#SPJ11

Focusing on your assigned work is incredibly effective in achieving your goals and getting things done.

When you concentrate on a task, you are giving it your full attention and energy, which means you can complete it more efficiently and with better quality. By staying focused, you also avoid distractions that can sidetrack you from your work and waste your time. This means that you are able to get more done in less time, which can increase your productivity and job satisfaction.
However, focusing on your work can be challenging, especially with the many distractions that surround us every day. To be effective, you need to create an environment that supports your concentration, such as turning off your phone notifications or finding a quiet workspace. You can also use techniques like time blocking or the Pomodoro method to help you stay on task and limit interruptions.
In short, focusing on your assigned work is highly effective in getting things done and achieving your goals. By eliminating distractions and creating a productive environment, you can work more efficiently and achieve greater success in your job or career.

To know more about Assigned work visit:

https://brainly.com/question/30884203

#SPJ11

Persistence is a key trait that enables individuals to overcome challenges, persevere through setbacks, and stay committed to their goals and aspirations.

Persistence is the ability to continue striving towards goals and objectives despite obstacles, failures, or difficulties. For a school leaver aspiring to become a successful business owner, persistence becomes a valuable asset in several ways.

Firstly, starting and growing a business requires resilience in the face of inevitable challenges. Persistence allows entrepreneurs to navigate obstacles, adapt to changing circumstances, and find creative solutions to problems. It helps them remain focused and determined, even when faced with setbacks or initial failures.

Secondly, building a successful business takes time and effort. It involves long hours, hard work, and the willingness to learn from mistakes. Persistence allows individuals to stay committed to their vision, push through difficult times, and maintain motivation and enthusiasm for their entrepreneurial journey.

Additionally, persistence is essential for continuous learning and improvement. Successful business owners understand that setbacks and failures are part of the process. They use these experiences as learning opportunities, adjust their strategies, and persistently pursue growth and innovation.

Learn more about business, below:

https://brainly.com/question/13160849

#SPJ11

To minimize losses to consumer surplus, protection for infant industries should be provided through subsidies. This is because subsidies allow the industry to produce goods at a lower cost, which in turn makes them more competitive in the market. The correct option is 1) .

However, it is important to note that subsidies must be used in moderation and only for a limited time to avoid creating a dependency on government support. Additionally, subsidies can lead to inefficiencies and may distort the market by favoring certain industries over others. Therefore, it is crucial to strike a balance between protecting infant industries and promoting competition and consumer welfare. In contrast, quotas and tariffs may limit competition and result in higher prices for consumers, while an overvalued exchange rate may lead to inflation and a decrease in the competitiveness of the industry. Overall, subsidies can be an effective tool for protecting infant industries, but they must be implemented with caution and in conjunction with other policies that promote a level playing field for all industries .

To know more about Consumers visit :

https://brainly.com/question/17256785

#SPJ11

A stock with a current market price of $50 and a strike price of $45 has an associated call option priced at $6.50. This call has an intrinsic value of $5 and a time value of $1.50.

The intrinsic value of a call option is the difference between the current market price of the underlying asset and the strike price of the option. In this case, the intrinsic value of the call option is $50 - $45 = $5. The time value of a call option is the difference between the total price of the option and its intrinsic value. In this case, the total price of the call option is $6.50, and its intrinsic value is $5. Therefore, the time value of the call option is $6.50 - $5 = $1.50.

Learn more about intrinsic value here:

https://brainly.com/question/27908904

#SPJ11

An increase in the volatility of a firm's stock returns is typically associated with an increase in the value of a call option on the firm's stock because call options allow the owner to buy the underlying stock at a predetermined price, but they are not obligated to do so.

As volatility increases, the potential range of stock prices at expiration also increases, which makes the call option more valuable. The value of a call option is affected by several factors, including the current stock price, the strike price, the time until expiration, the risk-free rate, and the volatility of the underlying stock.

An increase in volatility increases the potential range of stock prices at expiration, which increases the likelihood that the stock price will be above the strike price, making the call option more valuable.

However, it's worth noting that other factors, such as the time until expiration and the risk-free rate, can also impact the value of a call option.

To know more about stock refer here:

https://brainly.com/question/29992015#

#SPJ11

The amount of depreciation is $125,000.

The accounting break-even point is the level of sales at which total revenues equal total costs. It can be calculated using the following formula:

Accounting Break-Even = (Fixed Costs + Depreciation) / (Unit Price - Unit Variable Cost)

We are given the accounting break-even point of 25,000, the unit price of $24, and the unit variable cost of $10. We also know that the fixed costs are $225,000. Substituting these values into the formula, we get:

25,000 = (225,000 + Depreciation) / (24 - 10)

Simplifying the right-hand side of the equation, we get:

25,000 = (225,000 + Depreciation) / 14

Multiplying both sides by 14, we get:

350,000 = 225,000 + Depreciation

Subtracting 225,000 from both sides, we get:

Depreciation = 125,000

This means that $125,000 of the fixed costs are attributed to depreciation expenses.

To know more about depreciation here

https://brainly.com/question/30531944

#SPJ4

Complete Question:

In each of the following cases, find the unknown variable. Ignore taxes. (Do not round intermediate calculations and round your answers to the nearest whole number, e.g., 32.)

a. Accounting Break-Even 25,000

Unit Price $24

Unit Variable Cost $10

Fixed Costs $225,000

Depreciation $?

In microeconomics, demand and supply functions refer to the relationship between the price of a good or service and the quantity that consumers are willing and able to buy, and the quantity that producers are willing and able to sell, respectively.

These functions are used to determine the equilibrium price and quantity of a good or service in a market. In macroeconomics, the concepts of aggregate demand (AD) and aggregate supply (AS) functions refer to the relationship between the overall level of prices and the level of output in the economy.

AD represents the total amount of spending in the economy, while AS represents the total amount of goods and services produced. These functions are used to determine the equilibrium level of output and price level in the overall economy.

The main difference between these concepts is the level of analysis. Demand and supply functions are used to analyze the behavior of individual consumers and producers in a specific market, while AD and AS functions are used to analyze the behavior of the entire economy as a whole.

Additionally, AD and AS functions take into account factors such as inflation, unemployment, and government policies, which are not typically included in demand and supply functions. Another key difference is the nature of the relationship between price and quantity.

In demand and supply functions, there is an inverse relationship between price and quantity, meaning that as price increases, quantity demanded decreases and quantity supplied increases. In AD and AS functions, there is a positive relationship between price and output, meaning that as prices increase, the level of output also increases.

In summary, while demand and supply functions in microeconomics and AD and AS functions in macroeconomics are related concepts, they differ in their level of analysis and the nature of the relationship between price and quantity or output.

To know more about microeconomics refer here:

https://brainly.com/question/31193845#

#SPJ11

Software that businesses use to manage activities in both the internal and external operational environment is known as Enterprise Resource Processing. Thus, option A is correct.

With the use of a central database that compiles inputs from several departments, including accounting, manufacturing, supply chain management, sales, marketing, and human resources (HR), ERP is an application that automates company activities and offers insights and internal controls.

Every company has work to finish that involves many stakeholders with different responsibilities. However, it becomes difficult when the data required to carry out procedures and make crucial judgements is dispersed among disparate platforms. Employees struggle to locate the information they need and sometimes don't have access to it at all, regardless of whether the data is stored in spreadsheets or basic business management software. For instance, the accounting and FP&A teams might each have an own spreadsheet for tracking expenses that contains different data.

Learn more about ERP here:

https://brainly.com/question/30086499

#SPJ1

True, President Reagan reduced marginal tax rates as a part of his economic policy, known as Reaganomics, in order to encourage work and business risk-taking. This approach aimed to stimulate economic growth and investment.

President Reagan implemented several economic policies during his time in office, including reducing marginal tax rates. The idea behind this was that by lowering taxes on income and profits, individuals and businesses would have more incentive to work harder and take greater risks, which would ultimately stimulate economic growth. This policy is often referred to as Reaganomics, and while it has been the subject of much debate over the years, there is no denying that it had a significant impact on the U.S. economy during Reagan's presidency. So, to answer your question, it is true that President Reagan reduced marginal tax rates in order to promote work and business risk-taking.

Learn more about Reaganomics: https://brainly.com/question/12814840

#SPJ11

1. Surf Side originally planned to install 50 pools in April. 2. Surf Side actually installed 45 pools in April.

General understanding of the concepts and terms mentioned in the requirements:

The original number of pools that Surf Side initially planned or expected to install in April.

The actual number of pools that Surf Side actually installed in April.

The number of pools that the flexible budget is based on. The flexible budget is designed to adjust to changes in activity levels, and the number of pools is a key factor in determining the budgeted amounts.

The budgeted sales price per pool refers to the planned or estimated price at which Surf Side intended to sell each pool.

The budgeted variable cost per pool represents the estimated cost directly associated with producing or installing each pool.

The flexible budget variance is the difference between the actual results and the flexible budget. It shows the variation in costs or revenues that can be attributed to the difference between the actual activity level and the budgeted activity level.

The volume variance reflects the difference between the flexible budget and the static budget. It indicates the variation in costs or revenues resulting from differences in activity levels.

The missing numbers in the performance report would need to be filled in with the relevant data from the partially completed report.

Learn more about revenues  here:

https://brainly.com/question/14952769

#SPJ11

a) To derive the monopoly price and quantity, we need to find the profit-maximizing level of output for the monopolist. The monopolist maximizes profits by producing where marginal revenue (MR) equals marginal cost (MC).

First, we need to find the monopolist's marginal revenue. We can do this by taking the derivative of the demand function with respect to Q: MR = d(QP)/dQ = 70 - 2Q.

Next, we need to find the monopolist's marginal cost. We can do this by taking the derivative of the total cost function with respect to Q: MC = d(TC)/dQ = 4Q^2/100 - 5.

Setting MR equal to MC and solving for Q, we get:

70 - 2Q = 4Q^2/100 - 5

or

4Q^2 + 200Q - 10500 = 0

Solving this quadratic equation for Q, we get Q = 50. Therefore, the monopolist will produce 50 units of output.

To find the monopoly price, we can substitute Q = 50 into the demand function: P = 70 - Q = 70 - 50 = 20. Therefore, the monopoly price is $20 per unit.

To find the monopoly profits, we need to subtract the total cost of producing 50 units from the total revenue earned by selling 50 units:

TR = P x Q = $20 x 50 = $1000

TC = 4/300(50)^3 - 5(50) + 250 = $975

Therefore, the monopoly profits are $25.

b) The Lerner Index measures the extent of market power of the monopolist and is calculated as (P-MC)/P, where P is the price charged by the monopolist and MC is the marginal cost of production. In this case, the Lerner Index is:

(P-MC)/P = (20 - (4(50)^2/100 - 5))/20 = 0.5 or 50%

c) If the government sets the maximum price at $40, the monopolist will produce where MR = MC as before. However, the price will be set at the maximum allowed price of $40.

From the previous calculations, we know that the monopolist will produce 50 units of output. To find the price, we can use the demand function:

P = 70 - Q = 70 - 50 = 20 (this is the maximum price that can be charged)

Therefore, the monopolist will produce 50 units of output and charge $20 per unit, resulting in total revenue of $1000. The deadweight loss is the difference between the total surplus in the absence of the price ceiling (i.e., under monopoly) and the total surplus under the price ceiling. In this case, the deadweight loss is the triangle between the demand curve, the supply curve, and the vertical line at the quantity produced, which is 0.5 x ($40-$20) x 50 = $500.

d) If the government sets the maximum price at $30, the monopolist will produce where MR = MC as before. However, the price will be set at the maximum allowed price of $30.

From the previous calculations, we know that the monopolist will produce 33.33 units of output. To find the price, we can use the demand function:

P = 70 - Q = 70 - 33.33 = 36.67

Therefore, the monopolist will produce 33.33 units of output and charge $36.67 per unit, resulting in total revenue of $1222.

To know more about the monopoly price and quantity click this link -

brainly.com/question/25651654

#SPJ11

To calculate an estimate of the stock price, we would need additional information such as the EV/EBITDA ratio, the number of shares outstanding, and potentially other financial details.

The EV/EBITDA ratio is used to value a company by comparing its enterprise value (EV) to its EBITDA. The ratio varies depending on factors such as industry, company size, growth prospects, and market conditions. Without a specific ratio provided, it is not possible to estimate the stock price accurately.

To estimate the stock price of CSH (assuming EBITDA is provided in the question), we need the appropriate EV/EBITDA ratio and the relevant financial figures. However, the question does not provide the EV/EBITDA ratio or the number of shares outstanding. Without this information, it is not possible to calculate an estimate of CSH's stock price.

To calculate an estimate of the stock price, we would need additional information such as the EV/EBITDA ratio, the number of shares outstanding, and potentially other financial details.

Learn more about EV/EBITDA ratio at https://brainly.com/question/32064553

#SPJ1

If $1 exchanges for 0.90 euro this year, it means that the euro has appreciated in value compared to the US dollar. In other words, it now takes more dollars to buy the same amount of euros than it did last year. Therefore, we can conclude that the US dollar has weakened in relation to the euro.

It can be calculated as follows:
1. Last year's exchange rate: $1 U.S. = 1 Euro
2. This year's exchange rate: $1 U.S. = 0.90 Euro
3. Compare the exchange rates: The U.S. dollar now exchanges for fewer Euros than it did last year.
4. Conclusion: The U.S. dollar has depreciated against the Euro.

Learn more about exchange rate here: https://brainly.com/question/10187894

#SPJ11

The expected return for Stock A is 8.09% and the standard deviation is 0.50%.  The expected return for Stock B is 6.64% and the standard deviation is 1.31%.

To calculate the expected return for each stock, we multiply the probability of each state of the economy by the corresponding rate of return for that state, and sum the results.

Expected return for Stock A:

= (0.17 * -0.05) + (0.62 * 0.09) + (0.21 * 0.16)

= -0.0085 + 0.0558 + 0.0336

= 0.0809 or 8.09%

Expected return for Stock B:

= (0.17 * -0.21) + (0.62 * 0.08) + (0.21 * 0.25)

= -0.0357 + 0.0496 + 0.0525

= 0.0664 or 6.64

To calculate the standard deviation for each stock, we need to calculate the variance first. The variance is the sum of the squared difference between each rate of return and the expected return, multiplied by the probability of each state.

Variance for Stock A:

= (0.17 * (-0.05 - 0.0809)^2) + (0.62 * (0.09 - 0.0809)^2) + (0.21 * (0.16 - 0.0809)^2)

= 0.000025053

Standard deviation for Stock A:

= sqrt(Variance)

= 0.005005 or 0.50%

Variance for Stock B:

= (0.17 * (-0.21 - 0.0664)^2) + (0.62 * (0.08 - 0.0664)^2) + (0.21 * (0.25 - 0.0664)^2)

= 0.000170488

Standard deviation for Stock B:

= sqrt(Variance)

= 0.013055 or 1.31%.

Learn more about economy  here:

https://brainly.com/question/28208676

#SPJ11

Since the original cost is lower than the replacement cost, the inventory should be valued at $54 according to the lower of cost or market rule.

Based on the terms provided, I'll answer your question:

When determining the value of inventory, the lower of cost or market (LCM) rule is applied.

This rule states that inventory should be valued at the lesser of its original cost or current market replacement cost.

In this scenario, the original cost of the item is $54 and the current replacement cost is $67.

Applying the LCM rule, we compare the original cost ($54) and the replacement cost ($67).

Since the original cost is lower than the replacement cost, the inventory should be valued at $54 according to the lower of cost or market rule.

Learn more about LCM at

https://brainly.com/question/14923663

#SPJ11

The Duerr Company makes a $60,000, 60-day, 12% cash loan to Ryan Co. To calculate the interest and total amount to be collected at maturity, use the following formula:

Interest = Principal x Rate x Time

In this case, the principal is $60,000, the rate is 12% (0.12), and the time is 60/360 (since it's a 60-day loan and we're using a 360-day year).

Interest = $60,000 x 0.12 x (60/360) = $1,200

Now, to find the total amount to be collected at maturity, add the interest to the principal:

Total = Principal + Interest = $60,000 + $1,200 = $61,200

So, the correct answer is E) $61,200.

Learn more about interest click here

https://brainly.in/question/8172355

#SPJ11

Inventory decreases by $6,000, and cost of goods sold increases by $6,000.

The effect of this entry on the company's financial statements would be a decrease in the balance of the merchandise inventory account by $6,000 and an increase in the cost of goods sold account by $6,000.

This entry represents the cost of the merchandise that was sold during the period, which is recognized as an expense in the income statement. The cost of goods sold is subtracted from the revenue earned from the sale of merchandise to determine the gross profit of the company.

On the other hand, the decrease in the balance of the merchandise inventory account represents the cost of goods that were sold during the period and is reported as a current asset on the company's balance sheet.

Therefore, this entry would have the following effects on the financial statements:

An increase in the cost of goods sold account by $6,000, which would decrease the gross profit of the company.

A decrease in the merchandise inventory account by $6,000, which would decrease the current assets of the company.

Learn more about journal entry

brainly.com/question/14531346

#SPJ11

(a)This reduces the demand curve slope for each firm because they must lower their prices to compete with other firms in the market.(b)Each firm  is produced 100/3N units. (C)Each firm charges a price of 200/3N. (d) Each firm makes a profit of 4.71 (e) There would be 70 firms in the long run.

a. The number of firms N in the market affects each firm's demand curve by determining the overall level of competition in the market. As N increases, the market becomes more competitive, and each firm's market share decreases.

b. To determine how many units each firm produces, we can set marginal revenue equal to marginal cost, i.e., MR=MC. Using the equations given, we get:

100/N-2Q = 2Q

Solving for Q, we get:

Q = 100/3N

Each firm produces Q units, so substituting Q into the above equation, we get:

Each firm produces 100/3N units.

c. To determine the price each firm charges, we can substitute the quantity produced Q into the demand equation, which gives:

Q = 100/N - P

P = 100/N - Q

Substituting Q, we get:

P = 100/N - 100/3N = 200/3NEach firm charges a price of 200/3N.

d. To determine the profit each firm makes, we need to calculate total revenue and total cost. Total revenue is simply the price times the quantity, i.e., TR = P*Q. Total cost is given by the equation TC = 50 + Q². Substituting the values for P and Q from above, we get:

TR = (200/3N)*(100/3N) = 20000/9N²

TC = 50 + (100/3N)² = 5000/9N² + 50

Profit is given by the difference between total revenue and total cost, i.e., Profit = TR - TC. Substituting the values for TR and TC, we get:

Profit = 20000/9N² - 5000/9N² - 50 = 15000/9N²  - 50

Each firm makes a profit of 15000/9N² - 50 = N² = 200/9 =  4.71

e. In the long run, new firms can enter the market if there is a positive profit, and existing firms can exit if there is a negative profit. In this case, we can calculate the break-even price, i.e., the price at which the profit is zero:

15000/9N² - 50 = 0

N = √(5000)

This gives us approximately N = 70.7. Since N must be an integer, we can conclude that there will be 70 firms in the long run.

To know more about market

https://brainly.com/question/29077643

#SPJ4

To calculate the NPV of the project, we need to determine the cash flows associated with the project for each year and discount them to the present value using the required rate of return.

Year 0:

Initial fixed asset investment: -$2,400,000

Year 1 to Year 3:

Sales: $2,530,000

Costs: -$1,550,000

Depreciation: -$800,000 ($2,400,000 / 3)

Taxable income: $180,000 ($2,530,000 - $1,550,000 - $800,000)

Taxes (25%): -$45,000

Net income: $135,000

Add back depreciation: $800,000

Net cash flow: $935,000 ($135,000 + $800,000)

Using the required rate of return of 10%, we can calculate the present value factor (PVF) for each year:

Year 0: PVF = 1

Year 1: PVF = 1 / (1 + 0.10)^1 = 0.9091

Year 2: PVF = 1 / (1 + 0.10)^2 = 0.8264

Year 3: PVF = 1 / (1 + 0.10)^3 = 0.7513

The present value of the cash flows can be calculated as follows:

Year 0: -$2,400,000

Year 1: $935,000 x 0.9091 = $849,500

Year 2: $935,000 x 0.8264 = $772,196

Year 3: $935,000 x 0.7513 = $702,646

The sum of the present value of the cash flows is $19,342. Therefore, the NPV of the project is:

NPV = Sum of present value of cash flows - Initial investment

NPV = $19,342 - $2,400,000

NPV = -$2,380,658

The negative NPV indicates that the project is not financially viable and should be rejected.

Learn more about Net income here:

https://brainly.com/question/15570931

#SPJ11

There are several reasons why a company would want to hire a member of its external audit team. Firstly, external auditors are professionals who have experience and expertise in auditing and financial reporting.

By hiring a member of their team, the company can leverage their knowledge and skills to improve their own internal audit processes and financial reporting practices. Secondly, external auditors can bring a fresh perspective to the company's operations and help identify areas of improvement. They can also help the company comply with regulations and industry standards, ensuring that they are operating within legal and ethical boundaries.

Thirdly, hiring a member of the external audit team can help build a stronger relationship between the company and the audit firm. This can lead to better communication and cooperation in future audits, which can ultimately benefit the company in terms of cost savings and improved audit outcomes.

To know more about audit team click here

brainly.com/question/31085333

#SPJ11

The Advisory Committee is a group that meets with the- c. company once a year at their Chicago offices.

Their purpose is to provide feedback and advice on various business initiatives. The project team, on the other hand, is dispersed across different states and works collaboratively online.

This allows for a more flexible work environment and the ability to work on projects in a more efficient manner. The use of technology such as video conferencing and online collaboration tools has made it possible for team members to communicate effectively and work together seamlessly, despite the distance between them.

Overall, this approach has proven to be successful in promoting collaboration and achieving project goals.

To know more about Advisory Committee visit:

https://brainly.com/question/31284749

#SPJ11

The graph shows an upward-sloping relationship between output and capital, The graph shows an upward-sloping relationship between output and labor, with a diminishing marginal productivity of labor.

To graph the relationship between output and capital, we need to hold labor constant at its current value of N=100. So, the production function becomes

Y= 0.2(K+√(100)) = 0.2(K+10) = 0.2K+2

To graph this function, we can plot the points for different values of K

K Y

100 22

200 42

300 62

400 82

The graph of this function is a straight line with a slope of 0.2, which means that the MPK is constant and equal to 0.2. The marginal productivity of capital does not diminish as more capital is added.

To graph the relationship between output and labor, we need to hold capital constant at its current value of K=100. So, the production function becomes

Y= 0.2(100+√(N)) = 0.2N+20

Here are the points to plot for the graph.

N Y

100 20

110 23.148

120 25.962

To find the MPN for an increase of labor from 100 to 110, we need to calculate the change in output

MPN = (Y₂-Y₁)/(N₂-N₁) = (0.2(110+√(110))-0.2(100+√(100)))/(110-100) = 0.563

To find the MPN for an increase in labor from 110 to 120, we need to calculate the change in output

MPN = (Y₂-Y₁)/(N₂-N₁) = (0.2(120+√(120))-0.2(110+√(110)))/(120-110) = 0.536

The MPN diminishes as more labor is added, as seen from the decreasing values of MPN.

To know more about MPN:

https://brainly.com/question/30887275

#SPJ4

Plugging in the given values, we get: Market price per share = 14.6 * $14.00 = $204.40. Therefore, the answer is D. $204.40.

For the first question, we can use the formula for price-earnings ratio: P/E ratio = Market price per share / Earnings per share. Rearranging the formula, we can solve for the market price per share: Market price per share = P/E ratio * Earnings per share.For the second question, we need to calculate the weighted average number of common shares outstanding for the year. Since the additional 18,000 shares were issued on September 1, we need to prorate the number of shares outstanding for the year. The weighted average number of common shares outstanding is: (54,000 * 12) + (18,000 * 4) = 720,000. Now we can calculate the earnings per share: EPS = (Net income - Preferred dividends) / Weighted average number of common shares outstanding. Since the preferred stock is cumulative, we need to calculate the amount of preferred dividends for the year. The preferred dividend is: 10,000 * $100 * 6% = $60,000. Therefore, the earnings available to common shareholders is: $370,000 - $60,000 = $310,000.
Now we can calculate the earnings per share: EPS = $310,000 / 720,000 = $0.431 (rounded to the nearest cent). Therefore, the answer is D. $4.31.

To know more about Market visit:

brainly.com/question/13414268

#SPJ11

To calculate Sherry's selling price, we need to add the cost price and the additional margin.

The additional margin is obtained by multiplying the cost price ($60,000) by the markup percentage (25% expressed as 0.25):

Additional Margin = $60,000 x 0.25 = $15,000

Now, we can calculate the selling price by adding the cost price and the additional margin:

Selling Price = Cost Price + Additional Margin

Selling Price = $60,000 + $15,000

Selling Price = $75,000

Therefore, Sherry's selling price for each Volkswagen SUV will be $75,000.

Learn more about the selling price here:

brainly.com/question/2495593

#SPJ11

The internal control weakness that allowed the theft to occur was option A: the accounting system was not adequate to detect the fraud.

In order to prevent future incidents like this, LRC should implement stronger internal controls such as establishing segregation of duties, where different employees are responsible for different parts of the cash handling process. For example, one employee could be responsible for collecting the cash, another employee could be responsible for preparing the cash count sheet, and a third employee could be responsible for depositing the cash in the bank. This would create a system of checks and balances and reduce the risk of fraud.

In addition, LRC should consider implementing a system of regular audits and reviews of financial records to detect any irregularities or suspicious activities. This could include conducting surprise cash counts, comparing financial records to bank statements, and monitoring employee behavior for signs of financial stress or lavish spending.

Overall, it is essential for companies to prioritize strong internal controls to prevent fraud and protect their financial assets. By implementing these measures, LRC can ensure that their financial processes are secure and reliable, and avoid future incidents of theft or fraud. Therefore, the correct option is A.

The question was incomplete, Find the full content below:

After several months, LRC’s supervisor is arrested for stealing nearly $10,000 from the company.

Identify the internal control weakness that allowed this theft to occur. A. The accounting system was not adequate to detect the fraud.

A. The accounting system was not adequate to detect the fraud.

B. The cash collection clerks should have been at least four in number, one for each area-east, west, north, south.

C. The cash collection clerks should have been made responsible for depositing the cash in the bank.

D. The supervisor was responsible for handling the cash, preparing the cash count sheet, and depositing cash in the bank.

E, The supervisor was not professionally qualified to account for the cash.

Know more about Internal control here:

https://brainly.com/question/31074683

#SPJ11

The first step in preparing the lease amortization schedule is to calculate the present value of the minimum lease payments. Using the lessee's incremental borrowing rate of 8%, the present value of the lease payments is $32,287.

The lease amortization schedule for Manufacturers Southern is as follows: Date Lease Payment Interest Expense Lease Liability Equipment

1/1/21 - - $135,990 $135,990

3/31/21 $18,200 $8,639 $127,751 -

6/30/21 $18,200 $8,220 $117,771 -

9/30/21 $18,200 $7,779 $107,350 -

12/31/21 $18,200 $7,316 $96,466 -

12/31/21 $32,287 $1,971 - $32,287

At the end of the lease term, the lease liability will be reduced to zero, and the equipment will have a net book value of zero. The interest expense is calculated using the effective interest method, which uses the beginning lease liability balance multiplied by the incremental borrowing rate.The appropriate journal entries for Manufacturers Southern are as follows: 1/1/21: Lease Receivable $32,287, Equipment $135,990, Lease Liability $168,277

3/31/21: Lease Receivable $18,200, Interest Expense $8,639, Lease Liability $9,561

6/30/21: Lease Receivable $18,200, Interest Expense $8,220, Lease Liability $10,341

9/30/21: Lease Receivable $18,200, Interest Expense $7,779, Lease Liability $11,162

12/31/21: Lease Receivable $18,200, Interest Expense $7,316, Lease Liability $11,884

12/31/21: Cash $32,287, Lease Receivable $32,287

The lease receivable account is used to record the amortization of the lease liability over the lease term, and the lease liability account is used to record the present value of the lease payments. The equipment account is used to record the cost of the leased asset, and the interest expense account is used to record the interest cost of the lease liability. The cash account is used to record the payment of the residual value to the lessor at the end of the lease term.

Learn more about incremental here

https://brainly.com/question/25811981

#SPJ11

Bundling strategies are not applicable to CapSim, the Pioneer Strategy, the Balanced Scorecard, or Challenger firms.

Bundling strategies refer to the practice of combining multiple products or services together and offering them as a package to customers. In the context of CapSim, which is a business simulation game, bundling strategies may not be applicable or directly implemented as a specific feature or strategy within the game's framework.

CapSim focuses on various aspects of business management, such as marketing, finance, operations, and strategic decision-making. While bundling strategies can be a valuable marketing tactic in real-world business scenarios, their direct application or relevance may not be explicitly addressed or emphasized in the specific context of the CapSim simulation.

Therefore, among the given answer choices, the accurate response would be that bundling strategies are not applicable to CapSim, as they are not a specific feature or strategy emphasized within the game's framework.

Leran more about strategies here:

https://brainly.com/question/28561700

#SPJ11

The probability of waiting for more than 10 minutes after already waiting for 20 minutes is 0.4647. X follows the exponential distribution with a rate parameter of 1/16, denoted as X ~ Expo(1/16).

This means that X represents the time between consecutive sightings of Peter the Anteater, and the distribution of X assumes that sightings occur randomly and independently over time.

To find the probability of waiting less than 20 minutes before seeing Peter, we can use the cumulative distribution function (CDF) of the exponential distribution:

P(X < 20) = 1 - e^(-1/16 * 20) = 0.7135

Therefore, the probability of seeing Peter in less than 20 minutes is 0.7135.

To find the probability of not seeing Peter for the next 15 minutes but seeing him before the next lecture in 25 minutes, we can use the properties of the exponential distribution and the CDF:

P(X > 15 and X < 25) = e^(-1/16 * 15) - e^(-1/16 * 25) = 0.1820

Therefore, the probability of not seeing Peter in the next 15 minutes but seeing him before the next lecture in 25 minutes is 0.1820.

Lastly, if you have already been waiting for 20 minutes to see Peter and want to know the probability of waiting for more than 10 more minutes, we can use the survival function (SF) of the exponential distribution:

P(X > 30 | X > 20) = P(X > 10) = e^(-1/16 * 10) = 0.4647

Therefore, the probability of waiting for more than 10 minutes after already waiting for 20 minutes is 0.4647.

To know more about Exponential Distribution visit:

https://brainly.com/question/22692312

#SPJ11

A credit union is a financial cooperative that allows its members to pool their money together and provide loans to one another at a lower interest rate than what traditional banks offer.

Credit unions are not-for-profit organizations that operate with the goal of serving their members and providing them with affordable financial services. Members of credit unions typically have a common bond, such as living in the same community or working in the same industry. Credit unions are often able to offer lower interest rates on loans because they are owned and operated by their members, so there are no outside shareholders looking to profit off of the money being lent out. By working together and leveraging the power of their collective resources, credit union members are able to save money and obtain loans at a more affordable rate than what is typically available through traditional banks.

To know more about union visit:

https://brainly.com/question/31678862

#SPJ11