Answer:
V=f*(wavelength)
V= (800)(20m)
16000m/s
Explanation:
Identifying Cell Structures
Which structures are found in plant colls, but not in animal cells? Check all that apply
)
coll wall
coll membrane
chloroplasts
O lysosomes
ribosomes
vacuoles
Answer:
cell wall and chloroplasts
Explanation:
Help me please I’ll give brainliest answer
Answer:
the answer is c I believe
If an electron has an acceleration of 2.33 × 102 m/sec2, what is this value in units of m/min2?
Answer:
The electron has an acceleration of 838800 [tex]\frac{m}{min^{2} }[/tex]
Explanation:
An electron has an acceleration of 2.33*10² [tex]\frac{m}{sec^{2} }[/tex]
To be able to express in units [tex]\frac{m}{min^{2} }[/tex], you must carry out the conversion taking into account that 1 [tex]\frac{m}{sec^{2} }[/tex]= 3600 [tex]\frac{m}{min^{2} }[/tex]. Then you can apply the following rule of three: if 1 [tex]\frac{m}{sec^{2} }[/tex] equals 3600 [tex]\frac{m}{min^{2} }[/tex], 2.33 * 10² [tex]\frac{m}{sec^{2} }[/tex] equals how much [tex]\frac{m}{min^{2} }[/tex]?
[tex]\frac{m}{min^{2} }=\frac{2.33*10^{2} \frac{m}{sec^{2} }*3600\frac{m}{min^{2} }}{1\frac{m}{sec^{2} }}[/tex]
[tex]\frac{m}{min^{2} }=838800[/tex]
The electron has an acceleration of 838800 [tex]\frac{m}{min^{2} }[/tex]
What is the correct formula for the missing product from the equation below:
Na2CO3(aq)
+
CaCl2 (aq)
> NaCl +
Answer:
CaCO3 (s)
Explanation:
This equation is a double replacement equation, which means that since Na and Cl and paired, Ca and CO3 will be paired.
Then, you look at the charge of each element and balance
Ca has a 2+ charge
CO3 has a 2- charge
The 2+ charge and the 2- charge will cancel so there is no need for a subscript or to balance the equation
The complete equation will be Na2CO3 (aq) + CaCl2(aq) -> NaCl (aq) + CaCO3 (s)
I hope this helps and have a great day!
A 25.00 mL sample of the ammonia solution
was accurately diluted to 250.0 mL. A 25.00mL
aliquot of the diluted ammonia solution was
placed in a conical flask. Indicator was then added
and the solution was titrated with 0.208 molL-1
hydrochloric acid. The indicator changed colour
permanently when 19.64 mL of the acid had been
added. Calculate the concentration of ammonia in
the original solution.
Answer:
1.634 molL-1
Explanation:
The mol ration between NH3 and HCl is 1 : 1
Using Ca Va / Cb Vb = Na / Nb where a = acid and b = base
Na = 1
Nb = 1
Ca = 0.208 molL-1
Cb = ?
Va = 19.64 mL
Vb = 25.00mL
Solving for Cb
Cb = Ca Va / Vb
Cb = 0.208 * 19.64 / 25.0
Cb = 0.1634 molL-1 (Concentration of diluted ammonia solution)
Using the dilution equation;
C1V1 = C2V2
Initial Concentration, C1 = ?
Initial Volume, V1 = 25.00 mL
Final Volume, V2 = 250 mL
Final Concentration, C2 = 0.1634 molL-1
Solving for C1;
C1 = C2 * V2 / V1
C1 = 0.1634 * 250 / 25.00
C1 = 1.634 molL-1
Which of these statements describes a physical property of hydrogen? Group of answer choices it is found in acids. it is less dense than oxygen gas. it reacts with oxygen to form water. it is highly flammable.
Answer:
it is less dense than oxygen gas.
Explanation:
Hydrogen is the simplest chemical element that exists. The symbol for the chemical element Hydrogen is "H" and it is a colourless, tasteless, odorless, and highly flammable gas.
Hydrogen is a chemical element found in group (1) of the periodic table and as such it has one (1) electrons in its outermost shell. Therefore, Hydrogen has an atomic number of one (1) and a single valence electrons because it has only one proton and one electron in its nucleus.
In Chemistry, the properties of a chemical element that can be observed and measured without changing its chemical nature is known as a physical property. It includes density, color, freezing point, opacity, smell, melting point, viscosity, etc.
Hence, the statement which describes a physical property of hydrogen is that it is less dense (density) than oxygen gas.
Dipole-dipole interactions are (weaker than, stronger than, equal to) hydrogen bonds.
Answer and Explanation:
Dipole-Dipole interactions are weaker than hydrogen bonds.
Hydrogen bonds are a form of dipole-dipole interactions, being the strongest form of dipole-dipole interactions.
#teamtrees #PAW (Plant And Water)
The diagram shows the molecular structure of butane. What is the chemical
formula for butane?
Butane
H
Н
Hн
н—с-с-с-с-Н
|| []
Н н н Н
А. 4C1ОН
В. С4Н10
С. 4CH10
D. HC4H
Answer: B
Explanation: sorry if I'm too late but i just did this question and that was the right answer
most of the earth's landmasses is covered by a mixture of bits of rock and bit of once~living part of plants or animal. this material is called
and its not fossil
I went for a walk the other day. I went four blocks east, then seven blocks south, then one block west and finally
eight blocks north
a.What distance did I travel?
b. What's my displacement?
Answer:
a) distance is 4+7+1+8=20 blocks
b) displacement is 10 blocks
Explanation:
find displacement: x and y
x axis displacement = 4-1 = 3 blocks
y axis displacement = -7+8= 1 block
displacement = the square root of 3^2 + 1^2
= 9+1 = 10 blocks.
You can find the angle of displacement with respect to the initial position using trig identities, if you wish.
Give one example of
a) Homogeneous mixture of two elements
Answer:
honey
Coffee
blood
Explanation:
These components are uniformly distrubuted and these cannot be seperated unlike heterogeneous
Which of the nine substances are made of three elements?
Answer: You are made of mostly 6 elements: Oxygen, Carbon, Hydrogen, Nitrogen, Calcium, and Phosphorus. Some of these elements combine to form compounds in your body.
Explanation:
Which statement correctly describes the relationship between air temperature and air pressure?
-Warm air rises, creating an area of low pressure.
-Cool air sinks, creating an area of low pressure.
-Warm air sinks, creating an area of low pressure.
-Cool air rises, creating an area of low pressure.
Answer:
-Warm air sinks, creating an area of low pressure.
Explanation:
Heat will weigh more, than cool air!
Present in a state where it molecules are far apart during a change of state it's molecules slow down which change of state has most likely taken place from a gas to a liquid from a liquid to a gas from a solid to a liquid from a gas to a plasma
Answer:
The change of state that has occurred is from a gas to a liquid
Note: The question is incomplete. The complete question is given blow.
H₂O is initially present in a state where its molecules are far apart. During a change of state, its molecules slow down. Which change of state has most likely taken place?
from a gas to a liquid
from a liquid to a gas
from a solid to a liquid
from a gas to a plasma
Explanation:
Water can exists in three states: as gaseous water vapor, as liquid water, and as solid ice. Each of these states of water can be interconverted from one to another by the addition or removal of heat in a process known as change of state.
Liquid water can be converted to solid ice by the removal of heat, while solid ice ice can be converted to liquid water by the addition of heat. Also, liquid water can be converted to water vapor by the addition of heat, while water vapor can be converted to liquid water by the removal of heat.
Of the three states of water, the one in which the molecules are farthest apart is in the gaseous state. The molecules have high kinetic energy and move randomly while colliding with one another. When a heat is removed from these highly energetic molecules, the molecules slow down and lose some of their kinetic energy and a change of occurs from gaseous to liquid state.
Therefore, the change of state that occurred as described, is from gas to liquid.
A 500-gram block of solid cheese is melted in a pot. Which is most likely be the mass of the cheese after it is melted?
pleaseeeeeeeeee answer
Answer:
due to the law of conservation of mass, the mass would stay the same.
1. Using the structural formulas for ammonia (NH3 on the left) and hexane (C6H14 on the right) below which statement explains what will happen when ammonia and hexane are mixed?
A. Hexane will dissolve with ammonia if you stir them together for 10 minutes
B. Ammonia and hexane will not dissolve because one molecule is polar and the other is non polar.
C. Ammonia and hexane will dissolve together
D. Ammonia and hexane will not dissolve because one molecule is ionic and the other is non polar
2. If you add water to 750.0 mL of a 2.800 M KCl solution, and its molarity changes to 1.500 M, what will the new volume be?
1200 mL
401.0 mL
1400 mL
800.0 mL
Answer:
1. B. Ammonia and hexane will not dissolve because one molecule is polar and the other is non polar.
2. 1400 mL
Explanation:
In chemistry, like dissolve like! Ammonia is a polar molecule having a significant dipole moment owing to its three N-H bonds. On the other hand, hexane is a purely non-polar hydrocarbon hence the two substances can never dissolve in each other.
From the dilution formula;
C1V1=C2V2
C1= Initial concentration of the solution
V1 = Initial volume of the solution
C2 = Final concentration of the solution
V2= Final volume of the solution
2.8 M * 750.0 mL = 1.5 M * V2
V2 = 2.8 M * 750.0 mL/1.5 M
V2 = 1400 mL
Consider the following reaction occurring in a 1.0 L container:
H2 (g) + I2 (g) → 2 HI (g)
State 2 requirements for a successful collision between H2 and I2.
Answer:
jjjjajwhejwhswjiwiwvssvwvow9qiwgdvdbslw
Select the most reactive metal from the options below
Iron
Copper
Zinc
Gold
Answer: Hello, This is my most favorite class so I know this is right.
The most Reactive metal source is Copper.
Explanation:
This is the most reactive because it contains Lithium supplement.
Your Welcome! Mark me as Brainliest! :)
When naming an acid, which of the following is true?
chlorite changes to chloric acid
chlorate changes to chloric acid
none of these is true
chlorate changes to chlorous acid
Answer:
chlorate changes to chlorous acid
in what two ways do minerals form
Answer:
Minerals can form in three primary ways being precipitation, crystallization from a magma and solid- state transformation by chemical reactions (metamorphism). Mineral Precipitation is when a mineral is formed by crystallization from a solution. Examples include quartz, halite (table salt), calcite, and gypsum.
Answer:
When magma cools slowly, deep below the surface, it has time to form large crystals in regular patterns. The second way that minerals form is through solutions. (A solution is when one substance is dissolved uniformly in a liquid.) When elements and compounds leave the solution, they can crystalize.
how many moles is 130g of cocl2
Answer:
1.3142 mol CoCl2
Explanation:
Well, to answer this we need to find out how many grams are in a single mole of CoCl2. Two find that we need to get the molar mass of CoCl2
Co = 28.0101 g Co per mole
Cl = 35.453 * g Cl per mole
28.0101 + 2 * 35.453 = 98.9161 g CoCl2 per mole
Now, we divide:
130/98.9161 = 1.3142 mol CoCl2
There are 1.31 moles in 130grams of cobalt chloride (CoCl2). Details about how to convert mass to moles can be found below.
How to calculate number of moles?The number of moles of a substance can be calculated by dividing the mass of the substance by its molar mass.
According to this question, there are 130g of CoCl2.
molar mass of CoCl2 = 28 + 35.5(2) = 99g/mol
moles = 130g ÷ 99g/mol
moles = 1.31 moles
Therefore, there are 1.31 moles in 130grams of cobalt chloride (CoCl2).
Learn more about number of moles at: https://brainly.com/question/14919968
Which is which, acid or base?
Answer:
HCI - BASE
KOH - ACID
H2SO4 - ACID
H30 + :- BASE
NAOH - ACID
how many grams of sulphur contain 3.0×1021 atoms
Answer:
There are 0.16 g of sulphur in 3.0 × 10²¹ atoms.
Explanation:
One mole of a substance contains 6.02 × 10²³ particles
One mole of sulphur atom contains 6.02 × 10²³ atoms
Number of moles of sulphur present in 3.0 × 10²¹ atoms = 3.0 ×10²¹/6.02 10²³
Number of moles of sulphur atom = 0.00498 moles of sulphur atom
The mole of a substance is related to its mass by a quantity known as molar mass which is defined as the mass of one mole of that substance.
Molar mass of sulphur atom = 32 grams per mole (g/mol)
Mass of 0.00498 moles of sulphur atom = 0.00498 moles × 32 g/mol
Mass of sulphur = 0.16 g
Therefore, there are 0.16 g of sulphur in 3.0 × 10²¹ atoms.
PLEASE HELP ASAP!!!!!!????
Answer:
The third one!
before you retire in the evening, you sit down for a snack of milk and cookies. when you waken in the morning, you discover a carton of sour milk on the counter. knowing that milk sours if left in the refrigerator too long, has the reaction rate increased or decreased for the carton of milk on the counter? what has happened to its reaction time
Answer:
Increased
Explanation:
We know that the higher the temperature the higher the rate of reaction. This implies that as the temperature is increased, a reaction tends to proceed faster.
This follows from the collision theory, the higher the temperature, the higher the energy of the reacting particles hence they collide with each other faster and more effectively.
Thus the rate of reaction( or reaction time) for the carton of milk on the counter was increased.
Which feature separates watershed
Answer:
Ridges.
Explanation:
Watersheds are separated from one another by ridges. Ridges are elevated boundaries that divide watersheds.
Stoichmetric calculations must not be based on the limiting reagent
true or false
Answer:
Ture
Explanation:
Ture
True
True
True
Please help will mark Brainliest!!!
How many grams of HCL (hydrochloric acid) can you make with 50 grams of Cl.
H + Cl -> HCL is the balanced equation
Answer:
Explanation:
It's 21 /
do i have to know the chemical and physical properties of alloys? only chemistry students answer this.
Answer:
yes you do so you know how strong it is how maluble it's is so it can be customised to it's specific use
Answer:
alloy's properties are usually different from those of its component elements. Alloy constituents are usually measured by mass. Unlike pure metals, most alloys do not have a single melting point; rather, they have a melting range in which the substance is a mixture of solid and liquid.
physical properties of alloys:-Alloy steels have a wide range of special properties, such as hardness, toughness, corrosion resistance, magnetizability, and ductility. Nonferrous alloys, mainly copper–nickel, bronze, and aluminum alloys, are much used in coinage.
chemical properties of alloys:-Pure metals are useful but their applications are often limited to each individual metal's properties. Alloys allow metal mixtures that have increased resistance to oxidation, increased strength, conductivity, and melting point; Essentially any property can be manipulated by adjusting alloy concentrations.
dnt learn all thr properties.
these are the main properties..u can learn thse only. hope it will help u
Newtons law of motion