Answer:
15.2mL of the 0.10M sodium formate solution and 4.8mL of the 0.10M formic acid solution.
Explanation:
To find the pH of a buffer based on the concentration of the acid and conjugate base we must use Henderson-Hasselbalch equation:
pH = pKa + log [A⁻] / [HA]
Where [A⁻] could be taken as moles of the sodium formate and [HA] moles of the formic acid
4.25 = 3.75 + log [A⁻] / [HA]
0.5 = log [A⁻] / [HA]
3.162 = [A⁻] / [HA] (1)
As both solutions are 0.10M and you want to create 20mL of the buffer, the moles are:
0.10M * 20x10⁻³L =
2x10⁻³moles = [A⁻] + [HA] (2)
Replacing (2) in (1):
3.162 = 2x10⁻³moles - [HA] / [HA]
3.162 [HA] = 2x10⁻³moles - [HA]
4.162[HA] = 2x10⁻³moles
[HA] = 4.805x10⁻⁴ moles
[A⁻] = 2x10⁻³moles - 4.805x10⁻⁴ moles = 1.5195x10⁻³moles
That means, to create the buffer you must add:
[A⁻] = 1.5195x10⁻³moles * (1L / 0.10mol) = 0.0152L =
15.2mL of the 0.10M sodium formate solution[HA] = 4.805x10⁻⁴ moles * (1L / 0.10mol) = 0.0048L =
4.8mL of the 0.10M formic acid solutionwhat element has a higher ionization energy carbon or silicon
What two types of elements make up an Ionic bond ?
Answer:
Metals and Non-metals
Explanation:
When you finish exercising, you are hot, tired, and sweating. After a bottle of juice, you feel a lot better. Which organ systems are working together in this scenario?
Answer:
Nervous and Excretory
Explanation:
The nervous system makes you thirsty. The integumentary system makes you sweat. the integumentary system is very similar to the Excretory system.
Nervous and Excretory systems are working together in this scenario.
The nervous system makes you thirsty. The integumentary system makes you sweat. the integumentary system is very similar to the Excretory system.
The blood flow increases, your brain is exposed to more oxygen and nutrients. Exercise also induces the release of beneficial proteins in the brain. Sweating cools the body when it becomes warm. When the body temperature rises, such as when exercising on a hot day, the dermal blood vessels dilate.The excretory system works with the endocrine system to help maintain homeostasis.Learn more:
brainly.com/question/17342396
A piece of metal has a mass of 0.650 kilograms, has a width of 0.136 meters, and has a length of 0.0451 meters.Part A: If the metal’s volume is 291 cm3, what is the height of the metal in centimeters? (The width & length values given above are in a different unit!)
Part B: What is the density of this piece of metal?
Answer:
height = 4.74 cm
density = 2.23 g/ cm³
Explanation:
Mass of metal = 0.650 kg (650 g)
Width = 0.136 m
Length = 0.0451 m
Volume of metal = 291 cm³
Height in cm = ?
density of metal =?
Solution:
Width = 0.136 m (0.136 m×100 cm/1m = 13.6 cm)
Length = 0.0451 m (0.0451 m×100 cm/1m = 4.51 cm)
First of all we will calculate the height:
Volume = height× width× length
291 cm³ = h × 13.6 cm × 4.51 cm
291 cm³ = h × 61.34 cm²
h = 291 cm³ / 61.34 cm²
h = 4.74 cm
Density:
d = m/v
d = 650 g/291 cm³
d = 2.23 g/ cm³
A solution is made by mixing of 42.g water and 77.g of acetic acid HCH3CO2. Calculate the mole fraction of water in this solution.
Moles of [tex]H_2O[/tex] ,
[tex]n_{H_2O}=\dfrac{42}{2\times 1 + 16}=\dfrac{42}{18}\\\\n_{H_2O}=2.33\ moles[/tex]
Moles of acetic acid [tex]HCH_3CO_2[/tex] ,
[tex]n_{A.A}=\dfrac{77}{1 + 12 + 3 + 12 + 16\times 2}=\dfrac{77}{60}\\\\n_{A.A}=1.28\ moles[/tex]
Mole fraction of water :
[tex]M.F_{H_2O}=\dfrac{n_{H_2O}}{n_{H_2O}+n_{A.A}}\\\\M.F_{H_2O}=\dfrac{2.33}{2.33+1.28}\\\\M.F_{H_2O}=0.645[/tex]
Therefore, mole fraction of water in this solution is 0.645 .
Hence, this is the required solution.
Solid diarsenic trioxide reacts with fluorine gas (F2) to produce liquid arsenic pentafluoride and oxygen gas (O2). Write the Qc for this reaction.
Answer:
QC= [O2]^3/[F2]^10
Explanation:
2 2 6 2 6 2 10 3
1s 2s 2p 3s 3p 4s 3d 4p
=
Answer:
ARSENIC
Explanation:
It has an atomic number of 33
A balloon contains 1.1 L of gas at a pressure of 0.80 atm. How will the volume
change if the pressure is increased to 2.0 atm?
Answer:
Final volume = 0.44 L
Explanation:
Given data:
Initial volume of balloon = 1.1 L
Initial pressure = 0.80 atm
Final volume = ?
Final pressure = 2.0 atm
Solution:
The given problem will be solved through the Boly's law,
"The volume of given amount of gas is inversely proportional to its pressure by keeping the temperature and number of moles constant"
Mathematical expression:
P₁V₁ = P₂V₂
P₁ = Initial pressure
V₁ = initial volume
P₂ = final pressure
V₂ = final volume
Now we will put the values in formula,
P₁V₁ = P₂V₂
0.80 atm × 1.1 L = 2.0 atm × V₂
V₂ = 0.88 atm. L/ 2.0 atm
V₂ = 0.44 L
1. What 2 subatomic particles have charges? List the particle name and its charge.
Answer: Proton - positive charge (+)
Neutron - neutral charge (0)
Electron - negative charge (-)
Explanation:
Which set of procedures would be best to follow when separating a mixture of sand, salt, and water?
Answer:
Pour the mixture through a filter to separate the sand, then evaporate the liquid to separate the salt.
Explanation:
There are various methods used to separate single substances from a mixture. The method adopted depends upon the type of mixture and the ingredients used in it. According to the given question, the mixture comprises of sand, salt and water. Here, the first process will be the process of filtration. Through filtration, the salt-water solution and sand can be separated. Salt-water solution can be separated by the process of evaporation in which sat and water will be separated individually.
Observing a phenomenon in the lab includes which of the following?
Throwing away irrelevant items
Sorting through and disposing of police reports
Collecting evidence
Identifying unique features of evidence
Answer:
D
Explanation:
Identifying unique features of evidence
A laboratory is a place where scientific investigations and experiments are conducted. Observing a phenomenon in the lab includes identifying unique features of evidence. Thus, option D is correct.
What is observation?
An observation is said to be the deduction that is seen or heard and is due to the actions of the process or event that are gained from the information from a conducted experiment.
It is an important factor in an experiment and research and is used in the lab to falsify or prove the hypothesis. It is made based on the experimental setup and involves various steps.
The observations are used to draw conclusions and inferences based on the detailed identification of the characteristics of the evidence. The evidence supports the observation.
Therefore, option D. the features of evidence are the correct option.
Learn more about observations here:
https://brainly.com/question/28041973
#SPJ2
What is the most highly populated rotational level of Cl2 (i) 25deg C and (ii) 100 deg C? Take B=0.244cm-1.This question should not be resubmitted, it is a textbook question from the Atkins physical chemistry txtbook. 10 e.
Answer:
i
[tex]J_{m} = 20 [/tex]
ii
[tex]J_{m} = 22.5 [/tex]
Explanation:
From the question we are told that
The first temperatures is [tex]T_1 = 25^oC = 25 +273 =298 \ K[/tex]
The second temperature is [tex]T_2 = 100^oC = 100 +273 = 373 \ K[/tex]
Generally the equation for the most highly populated rotational energy level is mathematically represented as
[tex]J_{m} = [ \frac{RT}{2B}] ^{\frac{1}{2} } - \frac{1}{2}[/tex]
Here R is the gas constant with value [tex]R =8.314 \ J\cdot K^{-1} \cdot mol^{-1}[/tex]
Also
B is given as [tex]B=\ 0.244 \ cm^{-1}[/tex]
Generally the energy require per mole to move 1 cm is 12 J /mole
So [tex]0.244 \ cm^{-1}[/tex] will require x J/mole
[tex]x = 0.244 * 12[/tex]
=> [tex]x = 2.928 \ J/mol [/tex]
So at the first temperature
[tex]J_{m} = [ \frac{8.314 * 298 }{2* 2.928 }] ^{\frac{1}{2} } - 0.5 [/tex]
=> [tex]J_{m} = 20 [/tex]
So at the second temperature
[tex]J_{m} = [ \frac{8.314 * 373 }{2* 2.928 }] ^{\frac{1}{2} } - 0.5 [/tex]
=> [tex]J_{m} = 22.5 [/tex]
a. Describe the molecule chlorine dioxide, CIO in terms of three possible resonance structures.
b. Do any of these resonance structures satisfy the octet rule for every atom in the molecule? Why or why not?
Answer:
See explanation
Explanation:
The compound ClO2 has 19 valence electrons. ClO2 is a bent molecule with tetrahedral electron pair geometry but has two lone pairs of electrons. This is indicated by the presence of four electron pairs on the outermost shell of the central atom.
The molecule has an odd number of valence electrons, hence, it is generally regarded as a paramagnetic radical. None of the proposed Lewis structures for the molecule is satisfactory because none of them obeys the octet rule.
From the images attached, one can easily see that the electron dots around the oxygen and chlorine atoms does not satisfy the octet rule in all the resonance structures shown.
A student measured the masses of four different-sized blocks. The student determined that each block had a mass of 50 grams.
(There is a small block, a little bit bigger block, a big block and the biggles block)
Which block has the least density?
Answer:..
Explanation:
What specific portion of the gill is used to increase surface area though which gas (oxygen and carbon dioxide) exchange take place?
Answer:
gill lamellae
Explanation:
Gills in fishes are structures that permit fish to carry out gaseous exchange in water. Fishes exchange gases such as oxygen and carbon dioxide using gills.
Fish gills carry out their activity mainly through its major component called the gill lamellae. These are comb-like filaments which help increase the surface area of the gills in order to facilitate gaseous exchange
If you collect 5.74 mL of O 2 at 298 K and 1.00 atm over 60.0 seconds from a reaction solution of 5.08 mL, what is the initial rate of the reaction
Answer:
7.71 × 10⁻⁴ M/s
Explanation:
The initial rate of the reaction can be expressed by using the formula:
[tex]\dfrac{\Delta [O_2]}{\Delta t}[/tex]
where the number of moles of O₂ = [tex]\dfrac{PV}{RT}[/tex]
where;
Pressue P = 1.00 atm
Volume V =5.74mL = (5.74 /1000) L
Rate R = 0.082 L atm/mol.K
Temperature = 298 K
[tex]= \dfrac{1.00 \ atm \times \dfrac{5.74 }{1000}L}{0.082 \ L \ atm/mol.K \times 298 K}[/tex]
= 2.35 × 10⁻⁴ mol
Δ[O₂] = [tex]\dfrac{moles \ produced - initial \ mole}{\dfrac{5.08 }{1000}L }[/tex]
Δ[O₂] = [tex]\dfrac{2.35 \times 10^{-4} M - 0 M}{\dfrac{5.08 }{1000}}[/tex]
Δ[O₂] = 0.04626 M
The initial rate = [tex]\dfrac{\Delta [O_2]}{\Delta t}[/tex]
= [tex]\dfrac{0.04626}{60}[/tex]
= 7.71 × 10⁻⁴ M/s
which material should you use so that the area is cool in terms of temperture O asphalt O red bricks O concrete O soil O
Answer:
red bricks
Explanation:
right on edg 2020
Red bricks should you use so that the area is cool in terms of temperture. Therefore, option B is correct.
What are red bricks used for?Red bricks can be used in the construction of structures such as buildings, foundations, arches, pavement, and bridges. These can also be used for aesthetic purposes such as landscaping, face work, and a variety of other architectural purposes.
Traditional red bricks are saw to be more robust, and structures constructed with them are stronger than hollow block structures.Red brick can be warm, with rust or terracotta undertones. They could also be cool and more burgundy.
Thus, Red bricks should you use so that the area is cool in terms of temperture, option B is correct.
To learn more about the red bricks, follow the link;
https://brainly.com/question/14893671
#SPJ6
In the laboratory you dissolve 18.7 g of copper(II) bromide in a volumetric flask and add water to a total volume of 375mL.
Required:
a. What is the molarity of the solution?
b. What is the concentration of the copper(II) cation?
c. What is the concentration of the acetate anion?
Answer:
a) - 0.2 M
b) - 0.2 M
c)- 0
Explanation:
The chemical formula of copper (II) bromide is CuBr₂. Its molar mass (MM) is calculated as follows:
MM(CuBr₂)= MM(Cu) + (2 x MM(Br) = 63.5 g/mol + (2 x 80 g/mol)= 223.5 g/mol
a). Molarity = moles CuBr₂/1 L solution
moles CuBr₂ = mass/MM = 18.7 g x 1 mol/223.5 g = 0.084 mol
Volume in L = 375 mL x 1 L/1000 mL = 0.375 L
M = 0.084 mol/(0.375 L) = 0.223 M ≅ 0.2 M
b). When is added to water, CuBr₂ dissociates into ions as follows:
CuBr₂ ⇒ Cu²⁺ + 2 Br⁻
We have 1 mol Cu²⁺ (copper (II) cation) per mol of CuBr₂. Thus, the concentration of copper (II) cation is:
0.2 mol CuBr₂ x 1 mol Cu²⁺/mol CuBr₂ = 0.2 M
c). The concentration of acetate anion is 0. There is no acetate anion in the solution (the anion from CuBr₂ is bromide Br⁻).
) What would be the effect on the molarity of the NaOH solution if some of the water evaporated from the Florence flask after the NaOH solution was standardized with the KHP
Answer:
The effect is the increasing of the molar concentration.
Explanation:
When you standarize a solution of NaOH with KHP you are establish its molar concentration (That is the amount of moles of NaOH per liter of solution).
If you evaporated some water of the solution, you are increasing its concentration because volume is decreasing doing the amount of moles per liter increasing.
Please help will give brainliest _________________________________________________________________________________________________________________________________________
Answer:
What subject is this for?
Explanation:
Why does sodium chloride form a crystal lattice
Answer:
Ions of opposite charge strongly attract each other; those of like charges repel. As a result ions in an ionic compound are arranged in a particular manner.
Explanation:
Google is smart
Which element will gain three electrons to form an anion?
A. aluminum
B. chromium
C. iron
D. nitrogen
Answer:
D represents the element nitrogen which will gain three valence electrons forming a 3 ion.
Answer:
answer is
Explanation:
D
PLEASE HELP! WILL DO BRAINLIEST! What do scientists call all of the compounds that contain carbon and are found in living things?
organic
inorganic
acidic
nonacidic
Answer:
acidic because of electrical issues and the body of electrical equipment
What is the pH of a solution made by mixing 0.050 mol of NaCN with enough water to make a liter of solution
Answer:
pH = 11
Explanation:
The equilibrium of a weak base as NaCN in water is:
NaCN(aq) + H₂O(l) ⇄ OH⁻(aq) + Na⁺(aq) + HCN(aq)
And kb, the equilibrium constant, is:
Kb = [OH⁻] [HCN] / [NaCN]
Where Kb of NaCN is 2.04x10⁻⁵
In the beginning, the [NaCN] is 0.050mol / L = 0.050M.
Both [OH⁻] and [HCN] are produced from this equilibrium, and its concentration is X, that is:
2.04x10⁻⁵ = [X] [X] / [0.050M]
1.02x10⁻⁶ = X²
X = 1x10⁻³ = [OH⁻]
As pOH = - log [OH⁻]
pOH = 3.00
And pH = 14 - pOH
pH = 11
The Earth can gain or lose matter. True False
Answer:
True
Explanation:
According to some calculations, the Earth is losing 50,000 metric tons of mass every single year, even though an extra 40,000 metric tons of space dust converge onto the Earth's gravity well, it's still losing weight.
Answer:
true
Explanation:
If the earth was a guava fruit, the space where the seeds are would be the core/mantle
which two options are examples of chemical changes?
A. A shinny metal bar glows red and expands when heated.
B. white piece of paper turns black and gives off a smell when burned
C. When two clear colorless liquids are mixed together, a white solid forms
D. A white powder mixed with a clear, colorless liquid makes a solution that is also clear, colorless liquid
Answer:
B
Explanation:
It's the only thing that actually changes into something different and when u burn it it makes chemicals
Fluorine is the first element in Group 17 of the periodic table. Bromine is the third element in the same group. Which statement is true of both
elements?
A. Both of their ions will have the same positive charge.
B. The charge on the ion formed by fluorine will be less than the charge on the bromine ion.
C. The charge on the ion formed by fluorine will be greater than the charge on the ion formed by bromine.
D. Both of their ions will have the same negative charge.
Answer:D. Both of their ions will have the same negative charge
Explanation:
If 25.98 mL of 0.1180 M KOH reacts with 52.50 mL of CH3COOH solution, what is the molarity of the acid solution?
Answer:
Explanation:
We shall use the formula S₁V₁ = S₂V₂
S₁ = .1180 M , V₁ = 25.98 mL
S₂ = ? , V₂ = 52.50 mL
.1180 M x 25.98 = 52.50 x S₂
S₂ = .0584 M
Molarity of the acid solution = .0584 M .
The concentration of the acid solution is 0.058 M.
The equation of the reaction is;
CH3COOH(aq) + KOH(aq) -----> CH3COOK(aq) + H2O(l)
The following are known;
Concentration of base CB = 0.1180 M
Volume of base VB = 25.98 mL
Concentration of acid CA = ?
Volume of acid VA = 52.50 mL
Number of moles of acid NA = 1
Number of moles of base NB = 1
Using;
CAVA/CBVB =NA/NB
CAVANB = CBVBNA
CA= CBVBNA/VANB
CA = 0.1180 M × 25.98 mL × 1/52.50 mL × 1
CA = 0.058 M
Learn more: https://brainly.com/question/24381583
2) (3 pts) Convert 85 oF to oC.
Answer:
The answer will be 29.4˚C.
Explanation:
Using the formula 5(˚F-32)/9, plug in the numbers and you'll get 29.4˚C.