You want to transport 140 000 tons of granulate from DUQM to SOHAR
The product has a S.G. of 0,4
The internal measures of the 30ft containers are:
Length: 29'7"
Width: 8'4"
Height: 9'7"
Occupation degree is 90%
Weight of the container is 3 tons.
Max. Payload of the container is 33 tons.
Max. Weight of the train is 1600 tons.
Length of the train is not relevant.
We will use 4-axle SGNS wagons with a tare of 20 tons each.
The capacity of a SGNS wagon is 60ft.

a) How many containers do we have to transport? (30 marks)
b) How many containers fit on a train? (10 marks)
c) How many trains do we have to run? (10marks)
d) Debate the pros and cons of rail and road transport. (20 mark)

According to the definition of congruence modulo n, two integers a and b are said to be congruent modulo n if (a − b) is divisible by n. If n is a positive integer, then n divides a if there exists an integer q such that a = qn. Option(C) is correct  3a = 2 (mod 9).

a) There exists an integer a so that 5a = 2 (mod 9). To prove the given statement, let's assume a = 8. Then 5a = 5(8) = 40, which leaves a remainder of 4 on dividing by 9. So, 5a ≠ 2 (mod 9). Hence, the given statement is false.b) There exists an integer a so that 4a = 2 (mod 9). To prove the given statement, let's assume a = 7. Then 4a = 4(7) = 28, which leaves a remainder of 1 on dividing by 9. So, 4a ≠ 2 (mod 9). Hence, the given statement is false.c) There exists an integer a so that 3a = 2 (mod 9). To prove the given statement, let's assume a = 3. Then 3a = 3(3) = 9, which leaves a remainder of 2 on dividing by 9. So, 3a = 2 (mod 9). Hence, the given statement is true. So, (c) is the only true statement.According to the definition of congruence modulo n, two integers a and b are said to be congruent modulo n if (a − b) is divisible by n. If n is a positive integer, then n divides a if there exists an integer q such that a = qn.

To know more about integer visit :

https://brainly.com/question/31991876

#SPJ11

Project scheduling is a mechanism for developing and maintaining project timetables and project plans. The process takes into account task dependencies, constraints, and resource requirements.

The following items must be found for the project listed below: 1. Total project finishing time: Total Project Finishing Time = Late Finish Time (LFT) for the last activity in the project network diagram. In the table given, we can notice that Activity C is the last task in the project, and its duration is six weeks. As a result, the total project finishing time is six weeks.2. Critical Path:The Critical Path is the longest route through a project network diagram in terms of duration. In the network diagram given, the critical path includes A - T - U - N - C, with a total duration of 25 weeks. 4. If Activity B is delayed by seven weeks, explain how this will affect the total project critical path.The critical path of a project will change if one or more of its tasks are delayed beyond their early start time. If Activity B is delayed by seven weeks, it will be completed in week eleven, extending the length of Activity P by seven weeks.

The critical path would then be A-T-P-N-C, with a total duration of 31 weeks. This is due to the fact that Activity B, the predecessor of Activity P, is now delayed by seven weeks. The free float of Activity B is just one week, which indicates that its delay will cause a delay in the following activities.

To know more about Project scheduling visit-

https://brainly.com/question/30882691

#SPJ11

The mean of the children is 54 and the standard error is 0.822

From the question, we have the following parameters that can be used in our computation:

Mean = 54

Standard deviation = 5.2

Sample size = 40

The sample mean is always equal to the population mean

So, we have

Mean = 54

Here, we have

SE = σ/√n

So, we have

SE = 5.2/√40

Evaluate

SE = 0.822

Hence, the standard error is 0.822

Read more about standard error at

https://brainly.com/question/1191244

#SPJ4

Given that the cost of gasoline in Calgary is S151 CDN dollars/L and the cost of gasoline in Dallas, Texas is $4.19 US dollars/US gallon.

Let's first convert the exchange rates into US dollars:

1 CDN dollar $0.77 US Dollar1 US dollar $1.30 CDN Dollar Now,

let's convert the cost of gasoline in Calgary from S/L to USD/L:

[tex]S151 \text{ CDN dollars/L} \times 0.77 \text{ US Dollar/1 CDN dollar} = \boxed{$116.27 \text{ US dollars/L}}[/tex]

[tex]\$116.27\text{ US dollars/L}[/tex] Now,

let's convert the cost of gasoline in Dallas from US dollars/gallon to USD/L:$4.19 US dollars/US gallon x 1 US gallon/3.81

= $1.10 US dollars/L

Now we can compare the prices:

$116.27 USD/L (Calgary) vs $1.10 USD/L (Dallas)Since the cost of gasoline in Dallas is significantly cheaper than in Calgary, Dallas is the better deal for gasoline.

To know more about exchange rates visit:

https://brainly.com/question/26952144

#SPJ11

The vector is (-8, 4, 1, 0.5). The task is to calculate the magnitude of this vector. Therefore, the magnitude of the vector (-8, 4, 1, 0.5) is approximately 9.02.

For finding the magnitude of a vector, we use the formula ||v|| = √(v₁² + v₂² + v₃² + ... + vₙ²), where v₁, v₂, v₃, ..., vₙ are the components of the vector.

For the given vector (-8, 4, 1, 0.5), we need to calculate (-8)² + 4² + 1² + (0.5)². Simplifying this expression, we have 64 + 16 + 1 + 0.25 = 81.25.

For finding the square root of 81.25, we can use a calculator or approximate it to the nearest decimal. The square root of 81.25 is approximately 9.02.

Therefore, the magnitude of the vector (-8, 4, 1, 0.5) is approximately 9.02.

To learn more about vector click here

brainly.com/question/28173919

#SPJ11

Hence, we can conclude that if AB = 0, where A is a 3×2 matrix and B is a 2×3 non-zero matrix, then A is not left invertible. The statement is True.

To prove it, let's assume that A is left invertible, meaning there exists a matrix C such that CA = I, where I is the identity matrix. We will show that this assumption leads to a contradiction.

Given that AB = 0, we can multiply both sides of the equation by C:

C(AB) = C0

(CA)B = 0

IB = 0  (since CA = I)

B = 0 However, this contradicts the given information that B is a non-zero matrix. Therefore, our assumption that A is left invertible leads to a contradiction. we can conclude that if AB = 0, where A is a 3×2 matrix and B is a 2×3 non-zero matrix, then A is not left invertible.

To know more about matrix visit:

brainly.com/question/29132693

#SPJ11

The given partial differential equation is a one-dimensional heat equation. To solve it, we can use the method of separation of variables.

Assuming u(x, t) can be expressed as a product of two functions, u(x, t) = X(x)T(t), we substitute this into the partial differential equation:

X(x)T'(t) = X''(x)T(t)

Dividing both sides by X(x)T(t) gives:

T'(t)/T(t) = X''(x)/X(x)

Since the left side of the equation depends only on t and the right side depends only on x, they must be equal to a constant, say -λ^2:

T'(t)/T(t) = -λ^2 = X''(x)/X(x)

Now we have two ordinary differential equations:

T'(t)/T(t) = -λ^2

X''(x)/X(x) = -λ^2

The solutions to the time equation are of the form T(t) = Aexp(-λ^2t), where A is a constant. The solutions to the spatial equation are of the form X(x) = Bsin(λx) + Ccos(λx), where B and C are constants.

Applying the boundary conditions, we find that C = 0 and Bsin(10λ) = 100. This implies that λ = nπ/10, where n is an integer.

Therefore, the general solution is given by u(x, t) = Σ(A_nsin(nπx/10)exp(-(nπ/10)^2t)), where n ranges from 1 to infinity.

Finally, using the initial condition u(x, 0) = 10x, we can determine the coefficients A_n by expanding 10x in terms of the eigenfunctions sin(nπx/10) and performing the Fourier sine series expansion.

In conclusion, the solution to the given partial differential equation is u(x, t) = Σ(A_nsin(nπx/10)exp(-(nπ/10)^2t)), where A_n are determined by the Fourier sine series expansion of 10x.

To learn more about Coefficients - brainly.com/question/1594145

#SPJ11

Total number of arrangements = n! - nC₁  × (n - 1)! - nC₁ × (n - 1)! + nC₂ × (n - 2)! + nC₁ × (n - 1)C₂ × (n - 3)! - nC₂ × (n - 2)C₁  × (n - 3)! + nC₁  × (n - 1)C₃ × (n - 4)! Suppose there are n rowing boats arranged in a square table with n rows and n columns. The solution is obtained through the application of permutations and combinations.

Step 1: We consider all the possible permutations of the rowing boats ignoring the fact that some boats may lie on the same row or column. The total number of such permutations is n!.

Step 2: We subtract from the number of permutations above, the number of permutations where two boats lie on the same row.

The number of permutations where two boats lie on the same row can be obtained as  nC₁  × (n - 1)!

Step 3: Next, we add to the number of permutations in step 2, the number of permutations where two boats lie on the same column.

The number of permutations where two boats lie on the same column can be obtained as nC₁  × (n - 1)!

Step 4: We then subtract the number of permutations where two boats lie on the same row and the same column.

This is because we counted these arrangements twice in step 2 and step 3. The number of such permutations is nC₂ × (n - 2)!

Step 5: Next, we add the number of permutations where three boats lie on the same row, since they are subtracted thrice in step 2, step 3, and step 4. The number of such permutations is nC₁  × (n - 1)C₂ × (n - 3)!

Step 6: We then subtract the number of permutations where two boats lie on the same row and two boats lie on the same column.

This is because we counted these arrangements twice in step 4 and step 5. The number of such permutations is nC₂ × (n - 2)C₁  × (n - 3)!

Step 7: We add the number of permutations where four boats lie on the same row or column since we subtracted them four times in step 2, step 3, step 4, and step 6. The number of such permutations is nC₁ × (n - 1)C₃ × (n - 4)!

Total number of arrangements = n! - nC₁  × (n - 1)! - nC₁ × (n - 1)! + nC₂ × (n - 2)! + nC₁ × (n - 1)C₂ × (n - 3)! - nC2 × (n - 2)C₁  × (n - 3)! + nC₁  × (n - 1)C₃ × (n - 4)!

To know more about permutations , refer

https://brainly.com/question/1216161

#SPJ11

The difference between strength and fit when interpreting regression equations is that strength refers to the relationship between two variables, while fit refers to how well a regression line fits the data.

When interpreting regression equations, strength and fit are two different concepts.

Here is a detailed explanation of both concepts:

Strength: In regression analysis, the strength of the relationship between two variables is measured by the correlation coefficient.

The correlation coefficient measures the degree of association between two variables.

It ranges between -1 and +1.

A correlation coefficient of -1 indicates a perfect negative relationship, whereas a correlation coefficient of +1 indicates a perfect positive relationship.

When the correlation coefficient is close to 0, it indicates that there is no relationship between the two variables.

Fit: Fit refers to how well a regression line fits the data.

The goodness of fit of a regression line is measured by the coefficient of determination, also known as R-squared.

The R-squared value ranges between 0 and 1. A high R-squared value indicates a good fit, while a low R-squared value indicates a poor fit.

In general, an R-squared value greater than 0.5 is considered acceptable.

The R-squared value tells us the proportion of the variation in the dependent variable that can be explained by the independent variable(s).

To know more about, regression equations visit

https://brainly.com/question/32162274

#SPJ11

Here, pw(v) = (118/105, 176/105, -92/105).

(a) In order to find the matrix of the linear map prwV:V, one needs to compute the images of the basis vectors e1, e2, e3 and e4 under prwV.

For e1, we have prwV(e1) = 2u1 + u2, which means that the first column of the matrix is [2, 1, 0, 0].

For e2, we have prwV(e2) = u1 + u2, which means that the second column of the matrix is [1, 1, 0, 0].

For e3 and e4, we have prwV(e3) = 0 and prwV(e4) = 0, which means that the third and fourth columns of the matrix are [0, 0, 1, 0] and [0, 0, 0, 1], respectively. Therefore, the matrix of the linear map prwV:V in the standard basis S = {e1,e2, €3, €4} of V is given by:

[2 1 0 0][1 1 0 0][0 0 1 0][0 0 0 1]

(b) To find the projection vector pw(v), we need to find an orthogonal basis for W. From the given vectors, we can see that u1 and u2 are linearly independent. Therefore, we only need to orthogonalize them using the Gram-Schmidt process. Let v = (1, 1, 5)u1 = (1, -1, 1)u2 = (1, 2, 1)

Then, we get u1' = u1 = (1, -1, 1) and

u2' = u2 - projv(u2) = (1, 2, 1) - (2/15)(1, 1, 5) = (7/15, 8/15, -7/15)

Therefore, the orthogonal basis of W is {u1', u2'}.

Now, the projection vector pw(v) is given by

pw(v) = projW(v) = (v · u1')u1' + (v · u2')u2'

Therefore, pw(v) = ((1, 1, 5) · (1, -1, 1))/(1² + 1² + 1²)((1, -1, 1) + ((1, 1, 5) · (7/15, 8/15, -7/15))/(1² + 2² + 1²)((7/15, 8/15, -7/15))= (3/7, -1/7, 5/7) + (31/15, 29/15, -41/15)= (118/105, 176/105, -92/105)

Therefore, pw(v) = (118/105, 176/105, -92/105).

To know more about pw(v) visit:

https://brainly.com/question/31065339

#SPJ11

The marginal revenue function is R'(z) = -0.092 dollars, the marginal cost function is C'(z) = 75 - 0.16z dollars, and the marginal profit function is P'(z) = 0.16z - 75.092 dollars.

The given revenue function is R(z) = 1052 - 0.092z dollars.

Differentiating R(z) with respect to z, we get the marginal revenue function:

R'(z) = -0.092

The given cost function is C(z) = 1000 + 75z - 0.08z² dollars.

Differentiating C(z) with respect to z, we get the marginal cost function:

C'(z) = 75 - 0.16z

The profit function is given by P(z) = R(z) - C(z).

Differentiating P(z) with respect to z, we get the marginal profit function:

P'(z) = R'(z) - C'(z)

      = -0.092 - (75 - 0.16z)

      = -0.092 - 75 + 0.16z

      = 0.16z - 75.092

Learn more about marginal profit function here: brainly.com/question/21859959

#SPJ11

According to the information we can infer that the prices have risen by 25 percent more than the prices in the base year.

If the price index of the base year with respect to the current year is 125 percent, it means that the prices in the current year have increased by 25 percent compared to the prices in the base year. This implies that the prices have risen by 25 percent more than the prices in the base year.

According to the above, the correct option would be: 25 percent of prices increased in current year as compared to base year (option A).

Learn more about prices increase in: https://brainly.com/question/28542708
#SPJ4

To double the wide variety of pets sold in August as compared to April, you need to decide the number of pets sold in April after which multiply that wide variety through 2.

The variable "A" represents the number of pets sold in April. By multiplying "A" by 2, you purchased the favored quantity of pets offered in August, that is 2A.

This manner that the number of pets offered in August is twice the variety sold in April.

Thus, by enforcing strategies including promotional gives, marketing campaigns, or unique activities, you may potentially entice greater clients and increase the range of puppy sales in August, accordingly reaching the aim of doubling the income in comparison to April.

For more details regarding marketing, visit:

https://brainly.com/question/27155256

#SPJ1

(i) F0.75,6,15: Use the F-distribution table to find the value of F for cumulative probability 0.75 and degrees of freedom 6 and 15.

(ii) X²0.975,12: Use the chi-square distribution table to find the value of chi-square for cumulative probability 0.975 and degrees of freedom 12.

(iii) t0.9,22: Use the t-distribution table to find the value of t for cumulative probability 0.9 and degrees of freedom 22.

(iv) Z0.025: Use the standard normal distribution table to find the value of Z for cumulative probability 0.025.

(v) F0.05,9,10: Use the F-distribution table to find the value of F for cumulative probability 0.05 and degrees of freedom 9 and 10.

(vi) k: Use a tolerance factor table or statistical software to find the value of k for a given sample size, tolerance level, and confidence level in a two-sided tolerance interval.

(i) To find the value of F0.75,6,15, we use the F-distribution table. The first number, 0.75, represents the cumulative probability, and the second and third numbers, 6 and 15, represent the degrees of freedom. In the F-distribution table, we locate the row corresponding to the numerator degrees of freedom (6) and the column corresponding to the denominator degrees of freedom (15). The intersection of this row and column gives us the value of F0.75,6,15.

(ii) To find the value of X²0.975,12, we use the chi-square distribution table. The number 0.975 represents the cumulative probability, and the number 12 represents the degrees of freedom. In the chi-square distribution table, we locate the row corresponding to the degrees of freedom (12) and the column that is closest to 0.975. The value at the intersection of this row and column gives us X²0.975,12.

(iii) To find the value of t0.9,22, we use the t-distribution table. The number 0.9 represents the cumulative probability, and the number 22 represents the degrees of freedom. In the t-distribution table, we locate the row corresponding to the degrees of freedom (22) and the column that is closest to 0.9. The value at the intersection of this row and column gives us t0.9,22.

(iv) To find the value of Z0.025, we use the standard normal distribution table. The number 0.025 represents the cumulative probability. In the standard normal distribution table, we locate the row corresponding to the desired cumulative probability (0.025) and find the value in the column labeled "Z". This value gives us Z0.025.

(v) To find the value of F0.05,9,10, we use the F-distribution table. The first number, 0.05, represents the cumulative probability, and the second and third numbers, 9 and 10, represent the degrees of freedom. Similar to (i), we locate the row corresponding to the numerator degrees of freedom (9) and the column corresponding to the denominator degrees of freedom (10) in the F-distribution table. The intersection of this row and column gives us F0.05,9,10.

(vi) To find the value of k when n = 15, the tolerance level is 99%, and the confidence level is 95% for a two-sided tolerance interval, we need to use a tolerance factor table or a statistical software package that provides tolerance factor calculations. The tolerance factor table will have rows for different confidence levels and columns for different tolerance levels. In this case, we look for the row corresponding to a confidence level of 95% and the column corresponding to a tolerance level of 99%. The value at the intersection of this row and column gives us the value of k.

To learn more about standard normal distribution visit : https://brainly.com/question/4079902

#SPJ11

Confidence interval for μd = μ1 − μ2. Approach for The confidence interval for μd = μ1 − μ2 is given by:

Confidence interval = (X¯d- tα/2sD / √n, X¯d+ tα/2sD / √n)Where,

X¯d = Sample mean.

d = Sample mean difference.

tα/2 = The t-value for the selected level of significance (two-tailed).

sD = Standard deviation of the sample mean difference.

n = Sample size.

Formula used:

Sample Mean Difference = X¯d = Σd / n

Where,

Σd = Sum of the difference between the pairs

n = Number of pairs of data.

t - value = tα/2

= [ t-value table ]sD

= SD

= √[ Σd2 - (Σd)2 / n ] / (n - 1)

Calculation:

The given confidence level is 90%,So, the level of significance (α) is 1 - 0.9 = 0.1

The degrees of freedom is (n - 1) = 8 - 1 = 7Using the t-distribution table for 0.1 level of significance and 7 degrees of freedom, we get tα/2 as 1.895Given data is as follows:

PairsDifference (d)

110.08220.00330.11041.16652.11262.34672.478

We can calculate sample mean difference,

Sample Mean Difference (X¯d)

= Σd / nΣd

= 4.298n

= 8X¯d

= Σd / n

= 4.298 / 8

= 0.53725

Standard deviation of the sample mean difference (sD)

= SD

= √[ Σd2 - (Σd)2 / n ] / (n - 1)Σd2

= (0.082)2 + (0.003)2 + (0.110)2 + (1.166)2 + (2.112)2 + (2.346)2 + (2.478)2

= 14.691184SD

= √[ Σd2 - (Σd)2 / n ] / (n - 1)

= √[ 14.691184 - (4.298)2 / 8 ] / 7

= √[ 14.691184 - 9.2628203125 ] / 7

= √5.428363625 / 7

= 0.3856713846

Substitute the values in the formula,Confidence interval

= (X¯d- tα/2sD / √n, X¯d+ tα/2sD / √n)

= (0.53725 - (1.895 * 0.3856713846 / √8), 0.53725 + (1.895 * 0.3856713846 / √8))

= (0.0855, 0.9890)

Hence, the confidence interval is (0.0855, 0.9890).

To know more about mean  , visit;

https://brainly.com/question/1136789

#SPJ11

The value of  ∂z/∂u  is -145. Option B

From the information given, we have that the function is;

z = xy - y²

x = u - v

y = uv.

(u,v = (3, 5)

Now, let use partial derivatives of the function z with respect to u.

First, Substitute the expressions, we have;

z = (u - v)(uv) - (uv)²

= u²v - uv - u²v²

With v as constant, we have;

dz/du = 2uv - v² - 2uv²

Substituting the values u = 3 and v = 5 , we get;

dz/du = 2(3)(5) - (5)² - 2(3)(5)²

dz/du = 30 - 25 - 150

subtract the values, we have;

dz/du = -145

Learn more about partial derivatives at: https://brainly.com/question/30264105

#SPJ4

The radius of the n = 80 state of the Bohr hydrogen atom is 3.52 × 10² Å.

The formula to find the radius of an atom in the nth state of the Bohr model is:

r = n² × (0.529 Å) / Z

Where:

r = radius

n = state number

Z = atomic number (for hydrogen, Z = 1)

0.529 Å = Bohr radius

For n = 80,

the radius of the Bohr hydrogen atom can be calculated as:

r = (80)² × (0.529 Å) / 1r = 3.52 × 10² Å (rounded to three significant figures)

Therefore, the radius of the n = 80 state of the Bohr hydrogen atom is 3.52 × 10² Å.

To know more about radius , visit

https://brainly.com/question/13449316

#SPJ11

Cartesian equation is[tex]4y^2 = x\ or\ y^2 = x/4[/tex]We know that the polar equation of the form [tex]r = f(\Theta)[/tex]can be obtained by converting the Cartesian equation x = g(y) into polar coordinates.

To convert the equation, [tex]x = 4y^2[/tex] into polar coordinates, we need to replace x and y with their respective polar coordinates.

We know that [tex]x = r\ cos\ \Theta[/tex] and [tex]y = r\ sin\ \Theta[/tex], where r is the radial distance and θ is the polar angle.

So, the Cartesian equation can be expressed as follows:[tex]4(r\ sin\ \theta)^2 = r\ sin\ \theta\⇒\\\ 4r^2 sin^2 \theta = r\ cos\ \theta\⇒ \\r = 4\ cos\ \theta sin^2 \theta[/tex]

Therefore, the polar equation for the curve represented by the given Cartesian equation is [tex]r = 4\ cos\ \theta\ sin^2\ \theta[/tex].The polar equation for the curve represented by the given Cartesian equation [tex]x = 4y^2\ is\ r = 4\ cos\ \theta\ sin\ \theta[/tex].

To convert the given Cartesian equation[tex]r = 4 \cos\ \theta \sin^2 \theta[/tex][tex]x = 4y^2[/tex] into polar coordinates, we need to replace x and y with their respective polar coordinates.

Using the equation [tex]x = r\ cos\ \theta[/tex]and [tex]y = r\ sin\ \theta[/tex], we get [tex]4(r\ sin\ \theta)^2 = r\ cos\ \theta[/tex], which simplifies to [tex]r = 4\ cos\ \theta \sin^2 \theta[/tex].

Hence, the polar equation for the curve represented by the given Cartesian equation is r = 4 cos θ sin² θ.

Therefore, the polar equation for the given Cartesian equation [tex]x = 4y^2[/tex]is [tex]r = 4\ cos \ \theta\ sin^2 \theta[/tex].

To know more about Cartesian equation visit -

brainly.com/question/32622552

#SPJ11

Answer:

b) 100m

Step-by-step explanation:

tan(angle) = opposite/adjacent

tan(76) = height/25

4.01078093 = height/25

height = 25(4.01078093) = 100.23 or 100

The 96 confidence interval for the fraction of families is (49.8%, 64.2%)

We are 96% confident that 49.8% to 64.2% of families watch Gülümse Kaderine in Şile

From the question, we have the following parameters that can be used in our computation:

Sample size, n = 200

Familes,, x = 114

z-score at 96% confidence, z = 2.05

So, we have the proportion of families to be

p = 114/200

p = 0.57

Next, we calculate the margin of error using

E = z *  √[(p * (1 - p) / n]

So, we have

E = 2.05 * √[(0.57 * (1 - 0.57) / 200]

Evaluate

E = 0.072

The confidence interval is then calculated as

CI = p ± E

So, we have

CI = 0.57 ± 0.072

Evaluate

CI = (49.8%, 64.2%)

In (a), we have

CI = (49.8%, 64.2%)

This means that we are 96% confident that 49.8% to 64.2% of families watch Gülümse Kaderine in Şile

Read more about confidence interval at

https://brainly.com/question/20309162

#SPJ4

The computations that must be done last are:

a. Subtraction: 16-7

b. Addition: 10-5+4

c. Multiplication: 24x2

d. Division: 21,045/345

e. Subtraction: 5x6-3x4

f. Division: 9/3

g. Multiplication: 6/2x4

h. Multiplication: (8-2)3

To determine the computation that must be done last in each expression, let's analyze them one by one:

a. 5(16-7)-18

The computation that must be done last is the subtraction inside the parentheses, which is 16-7.

b. 54/(10-5+4)

The computation that must be done last is the addition inside the parentheses, which is 10-5+4.

c. (14-3)+(24x2)

The computation that must be done last is the multiplication, which is 24x2.

d. 21,045/345+8

The computation that must be done last is the division, which is 21,045/345.

e. 5x6-3x4+2

The computation that must be done last is the subtraction, which is 5x6-3x4.

f. 19-3x4+9/3

The computation that must be done last is the division, which is 9/3.

g. 15-6/2x4

The computation that must be done last is the multiplication, which is 6/2x4.

h. 5+(8-2)3

The computation that must be done last is the multiplication inside the parentheses, which is (8-2)3.

To learn more about expression visit : https://brainly.com/question/1859113

#SPJ11

The function 0 = 4e^(5t) - 2e^(2t) is a solution to the differential equation d²0/dt² + 50 = -7e^(2t). This is because when the function is substituted into the differential equation, it satisfies the equation for all intervals of t.

To determine whether the given function is a solution to the given differential equation, we substitute the function into the differential equation and check if it satisfies the equation for all values of t.The given differential equation is d²0/dt² + 50 = -7e^(2t). Substituting the function 0 = 4e^(5t) - 2e^(2t) into the differential equation, we have:
d²0/dt² + 50 = -7e^(2t)
Taking the second derivative of the function, we get:
d²0/dt² = (4e^(5t) - 2e^(2t))''
Evaluating the second derivative, we have:
d²0/dt² = (20e^(5t) - 4e^(2t))
Substituting this expression into the differential equation, we have:(20e^(5t) - 4e^(2t)) + 50 = -7e^(2t)
Simplifying the equation, we get:
20e^(5t) + 50 = 3e^(2t)
We can see that this equation holds true for all intervals of t. Therefore, the function 0 = 4e^(5t) - 2e^(2t) is indeed a solution to the given differential equation d²0/dt² + 50 = -7e^(2t).

Learn more about differential equation here

https://brainly.com/question/25664524



#SPJ11

Based on the given sample data, we have enough evidence to suggest that the average cost of tuition and fees at a four-year public college is greater than $5700.

To test the claim that the average cost of tuition and fees at a four-year public college is greater than $5700, we can use the traditional method of hypothesis testing.

Let's go through the five steps:

State the hypotheses.

The null hypothesis (H0): The average cost of tuition and fees at a four-year public college is not greater than $5700.

The alternative hypothesis (Ha): The average cost of tuition and fees at a four-year public college is greater than $5700.

Set the significance level.

Let's assume a significance level (α) of 0.05.

This means we want to be 95% confident in our results.

Compute the test statistic.

Since we have the population standard deviation, we can use a z-test. The test statistic (z-score) is calculated as:

z = (sample mean - population mean) / (population standard deviation / √sample size)

In this case:

Sample mean ([tex]\bar{x}[/tex]) = $5950

Population mean (μ) = $5700

Population standard deviation (σ) = $659

Sample size (n) = 36

Plugging in these values, we get:

z = ($5950 - $5700) / ($659 / √36)

z = 250 / (659 / 6)

z ≈ 2.717

Determine the critical value.

Since our alternative hypothesis is that the average cost is greater than $5700, we are conducting a one-tailed test.

At a significance level of 0.05, the critical value (z-critical) is approximately 1.645.

Make a decision and interpret the results.

The test statistic (2.717) is greater than the critical value (1.645).

Thus, we reject the null hypothesis.

There is sufficient evidence to support the claim that the average cost of tuition and fees at a four-year public college is greater than $5700.

For similar question on sample data.

https://brainly.com/question/30529546  

#SPJ8

Answer:

10 pi

Step-by-step explanation:

the formula for circumference is 2 x pi x radius, and since the diameter is given, we divide 10 by 2 to get 5. Then, we do 5x2, which is ten, so the answer is 10 pi! :)

A uniformly better estimator of θ can be obtained using the Rao-Blackwell theorem.

The Rao-Blackwell theorem states that if we have an unbiased estimator and a sufficient statistic, then we can obtain a uniformly better estimator by taking the conditional expectation of the estimator given the sufficient statistic.

In this case, since T(X) = X(1) is a jointly sufficient statistic for θ and E[X(1)] = θ, we can use the Rao-Blackwell theorem to improve the estimator.

Let's denote the improved estimator as θ' and calculate its conditional expectation given T(X):

E[θ' | T(X)] = E[X(1) | T(X)]

Since T(X) = X(1), we have:

E[θ' | T(X)] = E[X(1) | X(1)] = X(1)

Therefore, the improved estimator θ' is simply X(1), the first order statistic of the random sample.

This improved estimator is uniformly better than X(1) because it has the same unbiasedness property as X(1) but with potentially lower variance. By conditioning on the sufficient statistic, we have utilized more information from the data, leading to a more efficient estimator.

Learn more about Rao-Blackwell theorem

brainly.com/question/31316145

#SPJ11

The speed of the car, in kilometers per hour, at the time the brakes are first applied, for which the braking distance is less than 20 meters, could be 20 km/h and 30 km/h.

According to the given formula, the braking distance (d) is equal to 200 times the square of the speed of the car (s). To find the speeds at which the braking distance is less than 20 meters, we need to solve the inequality d < 20. Substituting the formula, we get 200[tex]s^{2}[/tex]< 20. Dividing both sides of the inequality by 200 gives [tex]s^{2}[/tex] < 0.1. Taking the square root of both sides, we have s < √0.1. Evaluating this value, we find that s is less than approximately 0.316. Converting this value to kilometers per hour, we get s < 0.316 * 60 = 18.96 km/h. Thus, any speed below 18.96 km/h will result in a braking distance less than 20 meters. However, since the options provided are discrete values, the closest speeds that satisfy the condition are 20 km/h and 30 km/h. Therefore, the possible speeds at which the braking distance is less than 20 meters are 20 km/h and 30 km/h.

Learn more about speed here:

https://brainly.com/question/29395239

#SPJ11

The transfer time T is expressed as T = L / B, where L is the number of kilobytes transmitted and B is the speed in kb/s. The PMF of T can be derived from the joint PMF of L and B.


The transfer time T is calculated by dividing the number of kilobytes transmitted (L) by the speed (B), giving T = L / B.

To find the PMF of T, we need to derive it from the joint PMF of L and B. The joint PMF table provided for PL,B(L, B) can be used to determine the probabilities associated with different values of T.

To calculate the PMF of T, we need to sum up the probabilities for all combinations of L and B that satisfy the condition T = L / B.

The CDF and PDF of W, given random variables X and Y, can be found using the joint PDF of X and Y. By integrating the joint PDF over the appropriate ranges, we can obtain the CDF and differentiate it to obtain the PDF of W. The specific calculations would depend on the ranges of X and Y as indicated in the joint PDF.


Learn more about Probability click here :brainly.com/question/30034780

#SPJ11

a. To find the curl of F, we calculate the cross product of the del operator (∇) and the vector F. The curl of F is given by curl F = (∂F₃/∂y - ∂F₂/∂z)i + (∂F₁/∂z - ∂F₃/∂x)j + (∂F₂/∂x - ∂F₁/∂y)k.

b. The answer to part (a) tells us about the circulation of the vector field F around a closed curve C. By Stokes' theorem, the line integral of F around a closed curve C is equal to the surface integral of the curl of F over any surface S bounded by C. Therefore, curl F represents the circulation density of the vector field F around a given curve. c. If C' is any closed curve, we can say that the line integral of F around C' is equal to the surface integral of the curl of F over any surface bounded by C'. This is a consequence of Stokes' theorem, which relates the circulation of a vector field around a closed curve to the flux of the curl of the vector field through any surface bounded by that curve.

d. Now, considering the half circle C' defined by (x - 10)² + (y - 25)² = 1 with y > 25, traversed from (11, 25) to (9, 25), we can use the result from part (c). Since C' is a closed curve, we can apply Stokes' theorem. We can take C as the combination of C' and the line segment connecting the endpoints of C. By Stokes' theorem, the line integral of F around C is equal to the surface integral of the curl of F over any surface bounded by C. We can evaluate the line integral by calculating the surface integral of the curl F over the surface bounded by C, which includes C' and the line segment.

However, without a specific surface bounded by C, it is not possible to provide a numerical value for ScF.dr. The result would depend on the specific surface chosen.

To learn more about vector field click here:

brainly.com/question/24332269

#SPJ11

The only set of vectors that forms a basis for R² is (4, 2), (-8,-6). So the correct answer is: b. a To answer this question, we need to recall that the set of vectors v₁, v₂, ... vₙ, is said to be a basis of a vector space V if and only if they are linearly independent and span the vector space V.

(a) (6, 6), (8, 0) :These vectors are not linearly independent since one of them is a multiple of the other: 2(6, 6) = (12, 12)

= 2(8, 0)

Therefore, they do not form a basis for R².

(b) (4, 2), (-8,-6) : We'll start by checking if these vectors are linearly independent, which means we need to check if there exist any scalars c₁ and c₂ such that:

c₁(4, 2) + c₂(-8, -6)

= (0, 0)

By equating the coefficients, we obtain the system of equations:

4c₁ - 8c₂ = 02c₁ - 6c₂

= 0

Dividing the second equation by 2 gives:

c₁ - 3c₂ = 0  and

so: c₁ = 3c₂.

Substituting this into the first equation, we get:

4(3c₂) - 8c₂ = 0,

Which simplifies to: c₂ = 0.

Substituting back into c₁ = 3c₂, we find that c₁ = 0.

Therefore, the only solution is (c₁, c₂) = (0, 0).

Thus, the vectors are linearly independent and since they are in R², they span R² as well.

Therefore, (4, 2), (-8,-6) is a basis for R².(c) (0,0), (4, 6). Here, one vector is a multiple of the other:

2(0,0) = (0,0)

≠ (4, 6).

Therefore, these vectors are linearly dependent and do not form a basis for R².(d) (6,2), (-12,-4). These vectors are not linearly independent since one of them is a multiple of the other:

-(6, 2) = (-12, -4).

Therefore, they do not form a basis for R².

To summarize, the only set of vectors that forms a basis for R² is (4, 2), (-8,-6). So the answer is: b. a

To know more about set of vectors, refer

https://brainly.com/question/31328368

#SPJ11

Answer:

28=-8a+4

Step-by-step explanation:

combine like terms

-6+-2=-8

-3+7=4