Answer:
2 m/s2
Explanation:
|acceleration| = (change in speed) divided by (time for the change)
Change in speed = (end speed) minus (start speed)
Initial speed of walking = 1 m/s
Final speed of walking = 3 m/s
Change of speed in walking = (3 - 1) m/s
= 2 m/s
Time in which the change of speed occurred = 1 sec
Then
Acceleration = Change of Speed/ Time taken
= 2/1 m/s^2
= 2 m/s^2
Therefore the answer is 2 m/s2.
The acceleration is 2 m/s².
What is acceleration?Acceleration can be defined as the rate of change of velocity.
The acceleration can be calculated using the formula below.
Formula:
a = (v-u)/t................... Equation 1Where:
a = accelerationv = Final velocityu = Initial velocityt = time.From the question,
Given:
v = 3 m/su = 1 m/st = 1 secondsSubstitute these values into equation 1
a = (3-1)/1a = 2 m/s².Hence, The acceleration is 2 m/s².
Learn more about acceleration here: https://brainly.com/question/605631
the homogenvity of s=ut+1/2at^2
Identify each of the following statements related to universal gravitation as either true or false. False The gravitational field around a planet is oriented radially outward. True Stars must be at least 2 or 3 times more massive than our sun in order to become a black hole. False Orbiting astronauts are weightless because of the absence of a support force. False The outer planets in our solar system wobble in their orbits because the gravitational effects of the sun are so small. False The earth is falling toward the sun. False As you move farther from the earth, its gravitational force acting on you increases.
The characteristics of the universal gravitation law allow finding the results for which statements are true:
2. Real stars must be at least 2 to 3 times more massive than our sun to become a black hole.
All the others are false.
The universal gravitational law states that the gravitational force is always attractive and is proportional to the masses and inversely proportional to the square of the distance.
[tex]F = - G \frac{Mm}{r^2}[/tex]
Where F is the force, G is the universal gravitational constant, M and m are the masses and r the distance between the bodies.
Let's analyze the expressions:
1. The gravitational field around a planet is oriented radically outward
False. The force is attractive therefore it is directed towards the center of the planet.
2. Real stars must be at least 2 to 3 times more massive than our sun to become a black hole.
True. From observations of super-novae the minimum mass is 3 solar masses.
3. Astronauts in orbit are weightless due to the absence of a supporting force.
False. Astronauts have no weight because the force of gravity binds to change the direction of their velocity.
4. The outer planets of our solar system wobble in their orbits because the gravitational effects of the sun are very small.
False. The attraction of the sun decreases with the square of the distance, but the wobble is due to the attraction of the other large planets in this area.
5. The earth falls towards the sun.
False. The earth has a speed parallel to the orbit around the sun and the acceleration due to the attraction of the sun changes the direction of the orbital velocity, but the earth is not directed at the sun.
6, As you move away from the ground, the gravitational force acting on you increases.
False. The gravitational force is inversely proportional to the distance, therefore it decreases when leaving the earth.
In conclusion with the characteristics of the universal gravitation law we can find which statements are true:
2. Real stars must be at least 2 to 3 times more massive than our sun to become a black hole.
All the others are false.
Learn more here: brainly.com/question/85842
What is electromagnetic force and how does it work and what it does??
Answer:
Explanation:
The electromagnetic force, also called the Lorentz force, acts between charged particles, like negatively charged electrons and positively charged protons. Opposite charges attract one another, while like charges repel. The greater the charge, the greater the force.
What is the vertical component of a ball thrown at a 27 degree angle at 16 m/s?
y = y 0 + v 0 y t − 1 2 g t 2 . If we take the initial position y 0 to be zero, then the final position is y = 10 m. The initial vertical velocity is the vertical component of the initial velocity: v 0 y = v 0 sin θ 0 = ( 30.0 m / s ) sin 45 ° = 21.2 m / s .
Jake walked 10 meters in 5
seconds. What was his speed?
A. 2 m/s
B. 0.5 m/s
C. 50 m/s
D. 15 m/s
Answer:
[tex]\boxed {\boxed {\sf A. \ 2 \ m/s}}[/tex]
Explanation:
Speed is the distance traveled per unit of time, or how fast an object is moving.
It is calculated by dividing the distance by the time.
[tex]s= \frac{d}{t}[/tex]
Jake traveled 10 meters in 5 seconds.
d= 10 m t= 5 sSubstitute the values into the formula.
[tex]s= \frac{10 \ m}{5 \ s}[/tex]
Divide.
[tex]s= 2 \ m/s[/tex]
Jake's speed was 2 meters per second and choice A is correct.
Different between sound wave and water wave
Water waves shake energy over the surface of the sea, while sound waves thump energy through the body of the air. Sound waves are compression waves. They're also called longitudinal waves because the air vibrates along the same direction as the wave travels.
can someone help me?
Answer:
B
Explanation:
Y won't sink because his shoes have wider area
The maximum allowable potential difference across a 250 mH inductor is 360 V . You need to raise the current through the inductor from 1.5 A to 2.5 A . What is the minimum time you should allow for changing the current?
This question involves the concepts of potential difference, inductance, and current.
The minimum time that should be allowed for the current to change is "0.694 ms".
The inductance of an inductor is given by the following formula:
[tex]E=L\frac{\Delta I}{\Delta t}\\[/tex]
where,
E = potential difference across the inductor = 360 volts
L = inductance of the inductor = 250 mH = 0.25 H
ΔI = change in current = 2.5 A - 1.5 A = 1 A
Δt = time required = ?
Therefore,
[tex]\Delta t = \frac{(0.25\ H)(1\ A)}{360\ volts}[/tex]
Δt = 6.94 x 10⁻⁴ s = 0.694 ms
Learn more about inductance here:
https://brainly.com/question/17431388?referrer=searchResults
An object's _____ energy that is used to perform work is equal to its potential energy plus its kinetic energy.
When positive charges build up in an object, the net charge of that object becomes...
a. it stays the same
b. negative
c. positive
d. neutral
Answer:
c. postive
Explanation:
All physical objects are made up of atoms. Inside an atom are protons, electrons and neutrons. The protons are positively charged, the electrons are negatively charged, and the neutrons are neutral.
Therefore, all things are made up of charges. Opposite charges attract each other (negative to positive). Like charges repel each other (positive to positive or negative to negative). Most of the time positive and negative charges are balanced in an object, which makes that object neutral.
Static electricity is the result of an imbalance between negative and positive charges in an object. These charges can build up on the surface of an object until they find a way to be released or discharged. One way to discharge them is through a circuit.
Hope this helps, have a nice day/night! :D
Answer:
C
Explanation:
C because if you build anything up it remains the same.
Explain how coral reefs alter the weathering and erosion of shorelines.
Answer: Coral reef structures also buffer shorelines against 97 percent of the energy from waves, storms, and floods, helping to prevent loss of life, property damage, and erosion. When reefs are damaged or destroyed, the absence of this natural barrier can increase the damage to coastal communities from normal wave action and violent storms.
The temperature of a body is measured using the resistance of a wire. To calibrate the device the following measurements were taken (ohms is the unit of electrical resistance).
Resistance in melting ice 240 ohms.
Resistance in boiling water 250 ohms.
a. What is the change in resistance for a change in temperature of 1 Degree Celcius?
b. The wire is placed into some hot water and the resistance is mesured to be 246 ohms. What is the temperature of the water?
Answer:
A)250-240
=10+960
=970
what is the purpose of delivering medical aid through drones
A source produces 25 waves every second. The wavelength of the waves is
50 cm. How fast will the waves be travelling?
Answer:
1 s
Explanation:
The speed of the sound, distance travelled and the time taken relationship is given as follows.
Speedofsound,v=Distancetravelled×Timetaken ----eqn 1
With the given values of wavelength = 50 cm = 0.5 m and frequency =1000 Hz, the speed of the wave is calculated as follows.
Speedofsound,v=Frequency(ν)×Wavelength(λ) -- eqn 2
That is, v=ν×λ=1000Hz×0.5m=500m/s
Substituting the value of the speed of sound in eqn 1 gives the time taken for the sound wave to travel a distance of 500 m.
That is, Timetaken=
Distancetravelled
Speedofsound
=
500m
500m/s
=1second.
Hence, the time taken for the sound wave to travel is 1 second.
The speed with which the waves will be travelling is 12.5m/s.
Given the data in the question;
Frequency; [tex]f = 25\ waves\ per\ second = 25s^{-1}[/tex]Wavelength; [tex]\lambda = 50cm = 0.5m[/tex]Speed of the wave; [tex]v =\ ?[/tex]
To determine how fast the waves will be travelling, we use the expression for the relations between wavelength, frequency and speed of wave.
[tex]\lambda = \frac{v}{f}[/tex]
Where [tex]\lambda[/tex] is wavelength, f is frequency and v is speed of wave
We substitute our values into the equation
[tex]0.5m = \frac{v}{25s^{-1}} \\\\v = 0.5m * 25s^{-1}\\\\v = 12.5ms^{-1}[/tex]
Therefore, the speed with which the waves will be travelling is 12.5m/s.
Learn more: https://brainly.com/question/14667830
A piece of wood has a mass of 8g and a volume of 10cm³. Work out the density of the wood in /3 .
no links please just explain how you got the answer.
Answer:
8×10^-3÷10×10^-6=8×10^2=800 kg/m^3
Answer:
2.4/3
Explanation:
first we make 8g/10cm then 0.8 so the only number that can fit for /3 is 2.4
hope helped!
A car was sitting in sunlight all day long. The heat that is now contained in the car was transferred to the car primarily by which of the following processes? Question 1 options: radiation conduction convection electrical energy transfer.
What is the kinetic energy of a 100kg ship moving along the water at a rate of 10m/s?
Answer:
5000 JExplanation:
The kinetic energy of an object can be found by using the formula
[tex]k = \frac{1}{2} m {v}^{2} \\ [/tex]
m is the mass in kg
v is the velocity of the object in m/s
From the question
m = 100 kg
v = 10 m/s
We have
[tex]k = \frac{1}{2} \times 100 \times {10}^{2} \\ = 50 \times 100 \\ = 5000 \: \: \: \: \: \: \: \: [/tex]
We have the final answer as
5000 JHope this helps you
Which of the following are equivalent to 1 Newton?
Answer:
1 kilogram meter per second squared?
Solve this anyone please fast ..!
Answer:
Explanation:
Ax= 20*sin37
Ay =20*cos37
Bx=15*cos40
By = -15*sin40
Cx = -6*cos60
Cy = -6*sin60
Answer:
Ax = 12 cos 53
Ay = 12 sin 53
Bx = 15 cos 320 = 15 cos 40
By = 15 sin 320 = -15 sin 40
Cx = 6 cos 240 = -6 cos 60
Cy = 6 sin 240 = -6 sin 60
Ryan and his dad go paintball img they 700 balls each how much did paintballing cost for the two of them
Answer:
We don't know how much it cost bc u didn't give us a number of how much one person cost or any details but if you add both of the balls together they have 1,400 balls
To calculate the cost of paintballing for Ryan and his dad, we need to know the cost per paintball. Once we have that information, we can multiply it by the total number of paintballs they used (700 balls each).
Let's say the cost per paintball is $0.50.
For Ryan:
Cost for Ryan = Cost per paintball × Number of paintballs used by Ryan
Cost for Ryan = $0.50/ball × 700 balls = $350
For his dad:
Cost for Dad = Cost per paintball × Number of paintballs used by Dad
Cost for Dad = $0.50/ball × 700 balls = $350
Total cost for both of them:
Total Cost = Cost for Ryan + Cost for Dad
Total Cost = $350 + $350 = $700
So, the total cost of paintballing for Ryan and his dad is $700, assuming the cost per paintball is $0.50.
To know more about paintball:
https://brainly.com/question/19052712
#SPJ3
Question 2 (1 point)
Potential energy depends on...
Speed and velocity
Position or shape
Length and color
Density and volume
Answer:
potential energy depends on position or shape
Alex drops a soccer ball and a table tennis ball from the top of a ladder. He wants to compare the velocities of the balls just before they hit the ground.
Which formula should Alex use to calculate the velocity of each ball,
assuming they are in free fall?
A) v=Gt
B) g=vt
C) t=vg
D) v=G/t
Answer:
d is the correct answer
Explanation:i did this math
The energy transferred per unit electric charge in a circuit is .
A current
B charge
C power
D potential difference
Any vector can be expressed as the sum of two components, usually
referred to as what?
Two vectors can be added together to determine the result (or resultant). ... computing the vector sum of all the individual forces acting upon that object.
i hope u understand
Physics has a number of words meaning "mathematical models". Which one does NOT fit?
Group of answer choices
Pattern
Relationship
Affair
Equation
Density of water is-
Answer:
The density of water is around 997 kg/m³ of 1 gran per millilimeter
help me out plssssssssssss
Answer:
1.b
2.c
have a good day bro
Almost all living things depend on the process of ____________________ to supply them with the energy they need.
A.
photosynthesis
B. heterotroph
Cuáles son las diferencias, con respecto al proceso de extracción y tratamiento, entre
el gas propano y el gas metano.
Answer:
la burguesía era de clase alta y en su mayoría rica. La gente de clase trabajadora generalmente trabajaba con un salario mínimo y solo tenía suficiente dinero para poner comida en la mesa. En este momento, la gente veía a los trabajadores de clase media como menos que otras personas.
Explanation:
Determine the kinetic energy of a 1500 kg roller coaster car that is moving with a speed of 35.0 m/s.
Answer:
kinetic energy equation is 85,714.2857 kg.
Explanation: