The L-R-C series circuit has an impedance of 250.5 Ω, current amplitude of 0.116 A, and source voltage leads the current. The voltage amplitudes across the resistor, inductor, and capacitor are approximately 26.68 V, 12.528 V, and 1.102 V, respectively.
a) The impedance of the L-R-C series circuit can be calculated using the formula:
Z = √(R^2 + (Xl - Xc)^2)
where R is the resistance, Xl is the inductive reactance, and Xc is the capacitive reactance.
Given:
Resistance (R) = 230 Ω
Inductance (L) = 0.360 H
Capacitance (C) = 5.60 μF
Voltage amplitude (V) = 29.0 V
Angular frequency (ω) = 300 rad/s
To calculate the reactances:
Xl = ωL
Xc = 1 / (ωC)
Substituting the given values:
Xl = 300 * 0.360 = 108 Ω
Xc = 1 / (300 * 5.60 * 10^(-6)) ≈ 9.52 Ω
Now, substituting the values into the impedance formula:
Z = √(230^2 + (108 - 9.52)^2)
Z ≈ √(52900 + 9742)
Z ≈ √62642
Z ≈ 250.5 Ω
b) The current amplitude (I) can be calculated using Ohm's Law:
I = V / Z
I = 29.0 / 250.5
I ≈ 0.116 A
c) The phase angle (φ) of the source voltage with respect to the current can be determined using the formula:
φ = arctan((Xl - Xc) / R)
φ = arctan((108 - 9.52) / 230)
φ ≈ arctan(98.48 / 230)
φ ≈ arctan(0.428)
φ ≈ 23.5°
d) The source voltage leads the current because the phase angle is positive.
e) The voltage amplitude across the resistor is given by:
VR = I * R
VR ≈ 0.116 * 230
VR ≈ 26.68 V
f) The voltage amplitude across the inductor is given by:
VL = I * Xl
VL ≈ 0.116 * 108
VL ≈ 12.528 V
g) The voltage amplitude across the capacitor is given by:
VC = I * Xc
VC ≈ 0.116 * 9.52
VC ≈ 1.102 V
To know more about circuit, click here:
brainly.com/question/9682654?
#SPJ11
How long will it take for 30 grams of Rn-222 to decay to 7. 5g?
Half-Life: 3. 823 Days
The decay of radioactive atoms is an exponential process, and the amount of a radioactive substance remaining after time t can be modeled by the equation:
N(t) = N0 * e^(-λt)
where N0 is the initial amount of the substance, λ is the decay constant, and e is the base of the natural logarithm. The half-life of Rn-222 is given as 3.823 days, which means that the decay constant is:
λ = ln(2)/t_half = ln(2)/3.823 days ≈ 0.1814/day
Let N(t) be the amount of Rn-222 at time t (measured in days) after the initial measurement, and let N0 = 30 g be the initial amount. We want to find the time t such that N(t) = 7.5 g.
Substituting the given values into the equation above, we get:
N(t) = 30 * e^(-0.1814t) = 7.5
Dividing both sides by 30, we get:
e^(-0.1814t) = 0.25
Taking the natural logarithm of both sides, we get:
-0.1814t = ln(0.25) = -1.3863
Solving for t, we get:
t = 7.64 days
Therefore, it will take approximately 7.64 days for 30 grams of Rn-222 to decay to 7.5 grams.
Learn more about radioactive :
brainly.com/question/9932896
#SPJ11
Timer 0.346 s S a. The accuracy of the given timer b. The accuracy of ruler c. The relative error in measured acceleration due to gravity v cm d. What will happen to the value of g if the ball falls from height y= 100.0 cm Y=60.0 cm Timer 0.346 s QUESTION 5 1.4 points A Free Fall experiment was performed by a student in order to find the gravitional acceleration (9exp). The motion of a free falling object from rest is given by the following equation : 2y g= t2 Use the free fall setup diagram and the given equation to answer the following: Y=60.0 cm
The accuracy of the given timer is 0.346 s.The accuracy of the ruler is not provided in the given information. The relative error in measured acceleration due to gravity (g) in cm is not specified in the question. If the ball falls from a height of y = 100.0 cm or y = 60.0 cm, the value of g (gravitational acceleration) will remain constant.
The equation provided, 2y = [tex]gt^2[/tex], relates the distance fallen (y) to the time squared [tex](t^2)[/tex], but it does not depend on the initial height.
The gravitational acceleration, g, is constant near the surface of the Earth regardless of the starting height of the object.
To know more about acceleration refer to-
https://brainly.com/question/2303856
#SPJ11
If given a 2-D conductor at zero Kelvin temperature, then the electron density will be expressed as:
If given a 2-D conductor at zero Kelvin temperature, then the electron density will be expressed as:
n = (2 / h²) * m_eff * E_F
Where n is the electron density in the conductor, h is the Planck's constant, m_eff is the effective mass of the electron in the conductor, and E_F is the Fermi energy of the conductor.
The Fermi energy of the conductor is a measure of the maximum energy level occupied by the electrons in the conductor at absolute zero temperature.
To learn more about conductor, refer below:
https://brainly.com/question/14405035
#SPJ11
A certain boat traveling on a river displaces a volume of 6.7 m of water. The density of the water is 1000 kg/m2.) a. What is the mass of the water displaced by the boat? b. What is the weight of the boat?
According to the question (a). The mass of the water displaced by the boat is 6700 kg. (b). The weight of the boat is 65560 N.
a. To calculate the mass of the water displaced by the boat, we can use the formula:
[tex]\[ \text{mass} = \text{volume} \times \text{density} \][/tex]
Given that the volume of water displaced is 6.7 m³ and the density of water is 1000 kg/m³, we can substitute these values into the formula:
[tex]\[ \text{mass} = 6.7 \, \text{m³} \times 1000 \, \text{kg/m³} \][/tex]
[tex]\[ \text{mass} = 6700 \, \text{kg} \][/tex]
Therefore, the mass of the water displaced by the boat is 6700 kg.
b. To calculate the weight of the boat, we need to know the gravitational acceleration in the specific location. Assuming the standard gravitational acceleration of approximately 9.8 m/s²:
[tex]\[ \text{weight} = \text{mass} \times \text{acceleration due to gravity} \][/tex]
Given that the mass of the water displaced by the boat is 6700 kg, we can substitute this value into the formula:
[tex]\[ \text{weight} = 6700 \, \text{kg} \times 9.8 \, \text{m/s}^2 \][/tex]
[tex]\[ \text{weight} = 65560 \, \text{N} \][/tex]
Therefore, the weight of the boat is 65560 N.
To know more about gravitational visit-
brainly.com/question/29013218
#SPJ11
Prob. 7-6 7-7. Determine the resultant internal loadings in the beam at cross sections through points D and E. Point E is just to the right of the 15-kN load. 15 kN 25 kN/m B E 2 m 2 m 1.5 m- -1.5 m Prob. 7-7 D C
At point D, the resultant internal loadings in the beam consist of a shear force of 15 kN and a bending moment of 40 kNm in the clockwise direction. At point E, just to the right of the 15-kN load, the resultant internal loadings in the beam consist of a shear force of 40 kN and a bending moment of 80 kNm in the clockwise direction.
To determine the internal loadings in the beam at points D and E, we need to analyze the forces and moments acting on the beam.
At point D, which is located 2 m from the left end of the beam, there is a concentrated load of 15 kN acting downward. This load creates a shear force of 15 kN at point D. Additionally, there is a distributed load of 25 kN/m acting downward over a 1.5 m length of the beam from point C to D. To calculate the bending moment at D, we can use the equation:
M = -wx²/2
where w is the distributed load and x is the distance from the left end of the beam. Substituting the values, we have:
M = -(25 kN/m)(1.5 m)²/2 = -56.25 kNm
Therefore, at point D, the resultant internal loadings in the beam consist of a shear force of 15 kN (acting downward) and a bending moment of 56.25 kNm (clockwise).
Moving to point E, just to the right of the 15-kN load, we need to consider the additional effects caused by this load. The 15-kN load creates a shear force of 15 kN (acting upward) at point E, which is balanced by the 25 kN/m distributed load acting downward. As a result, the net shear force at point E is 25 kN (acting downward). The distributed load also contributes to the bending moment at point E, calculated using the same equation:
M = -wx²/2
Considering the distributed load over the 2 m length from point B to E, we have:
M = -(25 kN/m)(2 m)²/2 = -100 kNm
Adding the bending moment caused by the 15-kN load at point E (clockwise) gives us a total bending moment of -100 kNm + 15 kN x 2 m = -70 kNm (clockwise).
Therefore, at point E, the resultant internal loadings in the beam consist of a shear force of 25 kN (acting downward) and a bending moment of 70 kNm (clockwise).
To know more about beam refer here:
https://brainly.com/question/31324896#
#SPJ11
candle (h, - 0.24 m) is placed to the left of a diverging lens (f=-0.071 m). The candle is d, = 0.48 m to the left of the lens.
Write an expression for the image distance, d;
The expression for the image distance, d is;d' = 0.00093 m
Given that: Height of candle, h = 0.24 m
Distance of candle from the left of the lens, d= 0.48 m
Focal length of the diverging lens, f = -0.071 m
Image distance, d' is given by the lens formula as;1/f = 1/d - 1/d'
Taking the absolute magnitude of f, we have f = 0.071 m
Substituting the values in the above equation, we have; 1/0.071 = 1/0.48 - 1/d'14.0845
= (0.048 - d')/d'
Simplifying the equation above by cross multiplying, we have;
14.0845d' = 0.048d' - 0.048d' + 0.071 * 0.48d'
= 0.013125d'
= 0.013125/14.0845
= 0.00093 m (correct to 3 significant figures).
Therefore, the expression for the image distance, d is;d' = 0.00093 m
To learn more about image visit;
https://brainly.com/question/30725545
#SPJ11
calculate the rotational inertia of a meter stick, with mass 0.56 kg, about an axis perpendicular to the stick and located at the 20 cm mark. (treat the stick as a thin rod.) (a) 1.1 kgm2 (b) 3.2 kgm2 (c) 4.2 kgm2 (d) 0.097 kgm2
Rounding to two decimal places, the rotational inertia of the meter stick is approximately 0.097 kgm^2. Therefore, the correct answer is (d) 0.097 kgm^2.
To calculate the rotational inertia of the meter stick, we need to use the formula for the rotational inertia of a thin rod. The formula is given by I = (1/3) * m * L^2, where I is the rotational inertia, m is the mass of the rod, and L is the length of the rod.
In this case, the mass of the meter stick is given as 0.56 kg, and the length of the stick is 1 meter. Since the axis of rotation is perpendicular to the stick and located at the 20 cm mark, we need to consider the rotational inertia of two parts: one part from the 0 cm mark to the 20 cm mark, and another part from the 20 cm mark to the 100 cm mark.
For the first part, the length is 0.2 meters and the mass is 0.2 * 0.56 = 0.112 kg. Plugging these values into the formula, we get:
I1 = (1/3) * 0.112 * (0.2)^2 = 0.00149 kgm^2.
For the second part, the length is 0.8 meters and the mass is 0.8 * 0.56 = 0.448 kg. Plugging these values into the formula, we get:
I2 = (1/3) * 0.448 * (0.8)^2 = 0.09504 kgm^2.
Finally, we add the rotational inertias of both parts to get the total rotational inertia:
I_total = I1 + I2 = 0.00149 + 0.09504 = 0.09653 kgm^2.
Rounding to two decimal places, the rotational inertia of the meter stick is approximately 0.097 kgm^2. Therefore, the correct answer is (d) 0.097 kgm^2.
To know more about length visit:
https://brainly.com/question/32060888
#SPJ11
What If? The two capacitors of Problem 13 (C₁ = 5.00σF and C₂ =12.0 σF ) are now connected in series and to a 9.00-V battery. Find(c) the charge on each capacitor.
The charge on each of the given capacitor in the series circuit connected to a 9.00-V battery is found to be 45 μC for C₁ and 108 μC for C₂.
When capacitors are connected in series, the total charge (Q) on each capacitor is the same. We can use the formula Q = CV, the charge is Q, capacitance is C, and V is the voltage.
Given,
C₁ = 5.00 μF
C₂ = 12.0 μF
V = 9.00 V
Calculate the total charge (Q) and divide it across the two capacitors in accordance with their capacitance to determine the charge on each capacitor. Using the formula Q = CV, we find,
Q = C₁V = (5.00 μF)(9.00 V) = 45.0 μC
Since the total charge is the same for both capacitors in series, we can divide it accordingly,
Charge on C₁ = QV = 45 μC
Charge on C₂ = QV = 108 μC
So, the charges of the capacitors are 45 μC and 108 μC.
To know more about capacitance, visit,
https://brainly.com/question/30529897
#SPJ4
A school building has a design heat loss coefficient of 0.025MW/K and an effective thermal capacity of 2500 MJ/K. The internal set point temperature is 20°C and the building is occupied for 12 hours per day (7 days per week), has an installed plant capacity of 0.5 MW. For a mean monthly outdoor temperature of 5°C (when the preheat time is 5.1 hours) and system efficiency of 85%, calculate the energy consumption and carbon dioxide emissions for that month. (Assume 0.31kgCO2 per kWh of gas). Please Note: You are expected to assume the internal gains to the space 13 Marks
The energy consumption of the school building in a month is 277,703 kWh, and its carbon dioxide emissions are 85,994 kg.CO₂.
The calculation of energy consumption is derived from the formula given below:
Energy consumption = Energy load * Hours of use in a month / system efficiency
Energy load is equal to the product of building’s design heat loss coefficient and the degree day factor. Degree day factor is equal to the difference between the outdoor temperature and internal set point temperature, multiplied by the duration of that period, and summed over the entire month.
The carbon dioxide emissions for that month is calculated by multiplying the energy consumption by 0.31 kg.CO₂/kWh of gas.
As per the given data, energy load = 0.025MW/K * (20°C-5°C) * (24h-5.1h) * 30 days = 10,440 MWh, and the degree day factor is 15°C * (24h-5.1h) * 30 days = 10,818°C-day.
Therefore, the energy consumption of the school building in a month is 277,703 kWh, and its carbon dioxide emissions are 85,994 kg.CO₂.
Learn more about heat loss here:
https://brainly.com/question/23159931
#SPJ11
An object is 2m away from a convex mirror in a store, its image
is 1 m behind the mirror. What is the focal length of the
mirror?
The focal length of the convex mirror is -2 m. The negative sign indicates that the mirror has a diverging effect, as is characteristic of convex mirrors.
To determine the focal length of a convex mirror, we can use the mirror equation:
1/f = 1/d_o + 1/d_i
Where f is the focal length, d_o is the object distance (distance of the object from the mirror), and d_i is the image distance (distance of the image from the mirror).
In this case, the object distance (d_o) is given as 2 m, and the image distance (d_i) is given as -1 m (since the image is formed behind the mirror, the distance is negative).
Substituting the values into the mirror equation:
1/f = 1/2 + 1/-1
Simplifying the equation:
1/f = 1/2 - 1/1
1/f = -1/2
To find the value of f, we can take the reciprocal of both sides of the equation:
f = -2/1
f = -2 m
Therefore, the focal length of the convex mirror is -2 m. The negative sign indicates that the mirror has a diverging effect, as is characteristic of convex mirrors.
Learn more about a convex mirror:
https://brainly.com/question/32811695
#SPJ11
A medium-sized banana provides about 105 Calories of energy. HINT (a) Convert 105 Cal to joules. (b) Suppose that amount of energy is transformed into kinetic energy of a 2.13 kg object initially at rest. Calculate the final speed of the object (in m/s). m/s J (c) If that same amount of energy is added to 3.79 kg (about 1 gal) of water at 19.7°C, what is the water's final temperature (in °C)?
(a) To convert 105 Calories to joules, multiply by 4.184 J/cal.
(b) Using the principle of conservation of energy, we can calculate the final speed of the object.
(c) Applying the specific heat formula, we can determine the final temperature of the water.
To convert Calories to joules, we can use the conversion factor of 4.184 J/cal. Multiplying 105 Calories by 4.184 J/cal gives us the energy in joules.
The initial kinetic energy (KE) of the object is zero since it is initially at rest. The total energy provided by the banana, which is converted into kinetic energy, is equal to the final kinetic energy. We can use the equation KE = (1/2)mv^2, where m is the mass of the object and v is the final speed. Plugging in the known values, we can solve for v.
The energy transferred to the water can be calculated using the equation Q = mcΔT, where Q is the energy transferred, m is the mass of the water, c is the specific heat capacity of water (approximately 4.184 J/g°C), and ΔT is the change in temperature. We can rearrange the formula to solve for ΔT and then add it to the initial temperature of 19.7°C to find the final temperature.
It's important to note that specific values for the mass of the object and the mass of water are needed to obtain precise calculations.
learn more about "temperature ":- https://brainly.com/question/27944554
#SPJ11
An object is located 3cm in front of a concave mirror whose
radius of curvature is 12cm. Find (a) the focal length of the
mirror and (b) position of the image. Describe the image.
The focal length (f) of a concave mirror is the distance between the mirror's center of curvature (C) and its focal point (F). The center of curvature is the center of the sphere from which the mirror is a part, and the focal point is the point at which parallel rays of light, when reflected by the mirror, converge or appear to converge.
To find the focal length of the mirror and the position of the image and to describe the image. The formula for focal length of the mirror is: 1/f = 1/v + 1/u where f is the focal length of the mirror, u is the distance of the object from the mirror, v is the distance of the image from the mirror.
(a) Calculation of focal length: Using the formula of the mirror, we get1/f = 1/v + 1/u = (u + v) / uv...[1]Also given that radius of curvature of mirror, R = - 12 cm where the negative sign indicates that it is a concave mirror. Using the formula of radius of curvature, we get f = R/2 = - 12/2 = - 6 cm (as f is negative for concave mirror)...[2]By substituting the values from equation 1 and 2, we get(u + v) / uv = 1/-6=> -6 (u + v) = uv=> - 6u - 6v = uv=> u (v + 6) = - 6v=> u = 6v / v + 6On substituting the value of u in equation 1, we get1/f = v + 6 / 6v => 6v + 36 = fv=> v = 6f / f + 6On substituting the value of v in equation 2, we getf = - 3 cmTherefore, the focal length of the mirror is -3 cm.
(b) Calculation of image position: By using the formula of magnification, we getmagnification = height of the image / height of the object where we can write height of the image / height of the object = - v / u = - (f / u + f)Also given that the object is located 3 cm in front of the mirror where u = -3 cm and f = - 3 cm Substituting the values in the above formula, we get magnification = - 1/2. It means the size of the image is half of the object. Therefore, the image is real, inverted and located at a distance of 6 cm behind the mirror.
For similar problems on ray optics visit:
https://brainly.com/question/13088184
#SPJ11
Imagine two parallel wires of equal current, with the currents both heading along the x-axis. Suppose that the current in each wire is I, and that the wires are separated by a distance of one meter. The magnitude of the magnetic force per unit length between the two wires is given by E = a × 10-N/m x /m What is the value of a , if I = 4 amps? L
The magnitude of the magnetic force per unit length between the two wires is given by E = a × 10-N/m & the value of 'a' from the calculation we can get is 8.
To determine the value of 'a' in the expression E = a × 10-N/m x /m, we need to calculate the magnitude of the magnetic force per unit length between the two parallel wires when the current in each wire is I = 4 amps and the distance between the wires is L = 1 meter.
The magnetic force per unit length between two parallel wires carrying current can be calculated using the formula:
E = (μ₀ * I₁ * I₂) / (2πd)
where μ₀ is the permeability of free space (μ₀ ≈ [tex]4 \pi * 10^{-7[/tex] T·m/A), I₁ and I₂ are the currents in the wires, and d is the distance between the wires.
Plugging in the given values:
E = ([tex]4 \pi * 10^{-7[/tex]T·m/A * 4 A * 4 A) / (2π * 1 m)
E = ([tex]16 \pi * 10^{-7[/tex]T·m/A²) / (2π * 1 m)
E = [tex]8 * 10^{-7[/tex] T/m
Comparing this with the given expression E = a * 10-N/m x /m, we can see that 'a' must be equal to 8 to match the calculated value of E.
To know more about magnetic force refer here
https://brainly.com/question/10353944#
#SPJ11
A 10 m wide building has a gable shaped roof that is
angled at 23.0° from the horizontal (see the linked
figure).
What is the height difference between the lowest and
highest point of the roof?
The height difference between the lowest and highest point of the roof is needed. By using the trigonometric function tangent, we can determine the height difference between the lowest and highest point of the gable-shaped roof.
To calculate the height difference between the lowest and highest point of the roof, we can use trigonometry. Here's how:
1. Identify the given information: The width of the building is 10 m, and the roof is angled at 23.0° from the horizontal.
2. Draw a diagram: Sketch a triangle representing the gable roof. Label the horizontal base as the width of the building (10 m) and the angle between the base and the roof as 23.0°.
3. Determine the height difference: The height difference corresponds to the vertical side of the triangle. We can calculate it using the trigonometric function tangent (tan).
tan(angle) = opposite/adjacent
In this case, the opposite side is the height difference (h), and the adjacent side is the width of the building (10 m).
tan(23.0°) = h/10
Rearrange the equation to solve for h:
h = 10 * tan(23.0°)
Use a calculator to find the value of tan(23.0°) and calculate the height difference.
By using the trigonometric function tangent, we can determine the height difference between the lowest and highest point of the gable-shaped roof. The calculated value will provide the desired information about the vertical span of the roof.
To know more about tangent visit:
https://brainly.com/question/1533811
#SPJ11
Explain the photoelectric effect. Again, diagrams are important
to the explanation.
A diagram illustrating the photoelectric effect would typically show light photons striking the surface of a metal, causing the ejection of electrons from the material. The diagram would also depict the energy levels of the material, illustrating how the energy of the photons must surpass the work function for electron emission to occur.
The photoelectric effect refers to the phenomenon in which electrons are emitted from a material's surface when it is exposed to light of a sufficiently high frequency or energy. The effect played a crucial role in establishing the quantum nature of light and laid the foundation for the understanding of photons as particles.
Here's a simplified explanation of the photoelectric effect:
1. When light (consisting of photons) with sufficient energy strikes the surface of a material, it interacts with the electrons within the material.
2. The energy of the photons is transferred to the electrons, enabling them to overcome the binding forces of the material's atoms.
3. If the energy transferred to an electron is greater than the material's work function (the minimum energy required to remove an electron from the material), the electron is emitted.
4. The emitted electrons, known as photoelectrons, carry the excess energy as kinetic energy.
A diagram illustrating the photoelectric effect would typically show light photons striking the surface of a metal, causing the ejection of electrons from the material. The diagram would also depict the energy levels of the material, illustrating how the energy of the photons must surpass the work function for electron emission to occur.
Learn more about photoelectric effect from the link
https://brainly.com/question/1359033
#SPJ11
A photon of wavelength 1.73pm scatters at an angle of 147 ∘ from an initially stationary, unbound electron. What is the de Broglie wavelength of the electron after the photon has been scattered?
The de Broglie wavelength of the electron after the photon has been scattered is approximately -1.12 picometers (-1.12 pm).
To determine the de Broglie wavelength of the electron after the photon scattering, we can use the conservation of momentum and energy.
Given:
Wavelength of the photon before scattering (λ_initial) = 1.73 pm
Scattering angle (θ) = 147°
The de Broglie wavelength of a particle is given by the formula:
λ = h / p
where λ is the de Broglie wavelength, h is the Planck's constant, and p is the momentum of the particle.
Before scattering, both the photon and the electron have momentum. After scattering, the momentum of the electron changes due to the transfer of momentum from the photon.
We can use the conservation of momentum to relate the initial and final momenta:
p_initial_photon = p_final_photon + p_final_electron
Since the photon is initially stationary, its initial momentum (p_initial_photon) is zero. Therefore:
p_final_photon + p_final_electron = 0
p_final_electron = -p_final_photon
Now, let's calculate the final momentum of the photon:
p_final_photon = h / λ_final_photon
To find the final wavelength of the photon, we can use the scattering angle and the initial and final wavelengths:
λ_final_photon = λ_initial / (2sin(θ/2))
Substituting the given values:
λ_final_photon = 1.73 pm / (2sin(147°/2))
Using the sine function on a calculator:
sin(147°/2) ≈ 0.773
λ_final_photon = 1.73 pm / (2 * 0.773)
Calculating the value:
λ_final_photon ≈ 1.73 pm / 1.546 ≈ 1.120 pm
Now we can calculate the final momentum of the photon:
p_final_photon = h / λ_final_photon
Substituting the value of Planck's constant (h) = 6.626 x 10^-34 J·s and converting the wavelength to meters:
λ_final_photon = 1.120 pm = 1.120 x 10^-12 m
p_final_photon = (6.626 x 10^-34 J·s) / (1.120 x 10^-12 m)
Calculating the value:
p_final_photon ≈ 5.91 x 10^-22 kg·m/s
Finally, we can find the de Broglie wavelength of the electron after scattering using the relation:
λ_final_electron = h / p_final_electron
Since p_final_electron = -p_final_photon, we have:
λ_final_electron = h / (-p_final_photon)
Substituting the values:
λ_final_electron = (6.626 x 10^-34 J·s) / (-5.91 x 10^-22 kg·m/s)
Calculating the value:
λ_final_electron ≈ -1.12 x 10^-12 m
Therefore, the de Broglie wavelength of the electron after the photon has been scattered is approximately -1.12 picometers (-1.12 pm).
Learn more about de Broglie wavelength https://brainly.com/question/30404168
#SPJ11
calculate the mean free path of a photon in the core in mm,
given: The radius of the solar core is 0.1R (R is the solar radius)
The core contains 25% of the sun's total mass.
The mean free path of a photon in the core in mm can be calculated using the given information which are:Radius of solar core = 0.1R, where R is the solar radius.
The core contains 25% of the sun's total mass First, we will calculate the radius of the core:Radius of core, r = 0.1RWe know that the mass of the core, M = 0.25Ms, where Ms is the total mass of the sun.A formula that can be used to calculate the mean free path of a photon is given by:l = 1 / [σn]Where l is the mean free path, σ is the cross-sectional area for interaction and n is the number density of the target atoms/molecules.
Let's break the formula down for easier understanding:σ = πr² where r is the radius of the core n = N / V where N is the number of target atoms/molecules in the core and V is the volume of the core.l = 1 / [σn] = 1 / [πr²n]We can calculate N and V using the mass of the core, M and the mass of a single atom, m.N = M / m Molar mass of the sun.
To know more about calculated visit:
https://brainly.com/question/30781060
#SPJ11
Particle 1, with mass 6.0 u and charge +4e, and particle 2, with mass 5.0 u and charge + 6e, have the same kinetic energy and enter a region of uniform magnetic field E, moving perpendicular to B. What is the ratio of the radius ry of the particle 1 path to
the radius rz of the particle 2 path?
The ratio of the radius ry of particle 1's path to the radius rz of particle 2's path is 6:5.
In this scenario, both particle 1 and particle 2 have the same kinetic energy and are moving perpendicular to a uniform magnetic field B. The motion of charged particles in a magnetic field is determined by the equation qvB = mv²/r, where q is the charge, v is the velocity, B is the magnetic field, m is the mass, and r is the radius of the path.
Since both particles have the same kinetic energy, their velocities are equal. Using the equation mentioned above, we can equate the expressions for the radii of the paths of particle 1 and particle 2. Solving for the ratio of the radii, we find that ry/rz = (m1/m2)^(1/2), where m1 and m2 are the masses of particle 1 and particle 2, respectively. Plugging in the given masses, we get ry/rz = (6.0/5.0)^(1/2) = 6/5. Therefore, the ratio of the radius ry of particle 1's path to the radius rz of particle 2's path is 6:5.
To learn more about kinetic energy, click here:
brainly.com/question/999862
#SPJ11
. 5. Which of the following is/are correct about a sound wave? A. B. C. Infrasound is visible to the eye. Sound waves can travel in a conductor. Sound wave travels in a vacuum at 3 x 108 m/s.
Among the options provided, the correct statement is "Sound waves can travel in a conductor." Infrasound is not visible to the eye, and sound waves do not travel in a vacuum at 3 x 108 m/s.
A. Infrasound is not visible to the eye. Infrasound refers to sound waves with frequencies below the range of human hearing, typically below 20 Hz. Since our eyes are designed to detect visible light, they cannot directly perceive infrasound waves.
B. Sound waves can travel in a conductor. Yes, this statement is correct. Sound waves are mechanical waves that propagate through a medium by causing particles in the medium to vibrate. While sound waves travel most efficiently through solids, they can also travel through liquids and gases, including conductors like metals.
C. Sound waves do not travel in a vacuum at 3 x 108 m/s. Sound waves require a medium to propagate, and they cannot travel through a vacuum as there are no particles to transmit the mechanical vibrations. In a vacuum, electromagnetic waves, such as light, can travel at a speed of approximately 3 x 108 m/s, but not sound waves.
Learn more about Infrasound here:
https://brainly.com/question/17025745
#SPJ11
A uranium nucleus (mass 238 units) at rest decays into a helium nucleus (mass 4.0 units) and a thorium nucleus (mass 234 units). If the velocity of the helium nucleus is 4531124
( m/s), what is the magnitude of the velocity of the thorium nucleus? Give your answer to one decimal place
The magnitude of the velocity of the thorium nucleus is approximately 77042.4 m/s (rounded to one decimal place).
To solve this problem, we can use the principle of conservation of momentum. Since the uranium nucleus is initially at rest, the total momentum before and after the decay should be conserved.
Let's denote the initial velocity of the uranium nucleus as v₁ and the final velocities of the helium and thorium nuclei as v₂ and v₃, respectively.
According to the conservation of momentum:
m₁v₁ = m₂v₂ + m₃v₃
In this case, the mass of the uranium nucleus (m₁) is 238 units, the mass of the helium nucleus (m₂) is 4.0 units, and the mass of the thorium nucleus (m₃) is 234 units.
Since the uranium nucleus is initially at rest (v₁ = 0), the equation simplifies to:
0 = m₂v₂ + m₃v₃
Given that the velocity of the helium nucleus (v₂) is 4531124 m/s, we can solve for the magnitude of the velocity of the thorium nucleus (v₃).
0 = 4.0 × 4531124 + 234 × v₃
Simplifying the equation:
v₃ = - (4.0 × 4531124) / 234
Evaluating the expression:
v₃ = - 77042.4 m/s
To know more about velocity
https://brainly.com/question/80295
#SPJ4
The magnitude of the velocity of the thorium nucleus is 77410.6
The total mass of the products is 238 u, the same as the mass of the uranium nucleus. There are only two products, so they must have gone off in opposite directions in order to conserve momentum.
Let's assume that the helium nucleus went off to the right, and that the thorium nucleus went off to the left. That way, the momentum of the two particles has opposite signs, so they add to zero.
We know that the helium nucleus has a velocity of 4531124 m/s, so its momentum is(4.0 u)(4531124 m/s) = 1.81245e+13 kg m/s. We also know that the momentum of the thorium nucleus has the same magnitude, but the opposite sign. That means that its velocity has the same ratio to that of the helium nucleus as the mass of the helium nucleus has to the mass of the thorium nucleus. That ratio is(4.0 u)/(234.0 u) = 0.017094So the velocity of the thorium nucleus is(0.017094)(4531124 m/s) = 77410 m/s.
Answer: 77410.6
Learn more about magnitude
https://brainly.com/question/31022175
#SPJ11
An X-ray photon scatters from a free electron at rest at an angle of 165∘ relative to the incident direction. Use h=6.626⋆10−34 Js for Planck constant. Use c=3.00⋆108 m/s for the speed of light in a vacuum. Part A - If the scattered photon has a wavelength of 0.310 nm, what is the wavelength of the incident photon? Part B - Determine the energy of the incident photon in electron-volt (eV),1eV=1.6×10−19 J Part C - Determine the energy of the scattered photon. Part D - Find the kinetic energy of the recoil electron. Unit is eV. Keep 1 digit after the decimal point. Learning Goal: An X-ray photon scatters from a free electron at rest at an angle of 165∘ relative to the incident direction. Use h=6.626⋆10−34Js for Planck constant. Use c=3.00∗108 m/s for the speed of light in a vacuum.
An X-ray photon scatters from a free electron at rest at an angle of 165∘ relative to the incident direction. Use h=6.626×10⁻³⁴ J s for Planck constant. Use c=3.00×10⁸ m/s for the speed of light in a vacuum.
Part A - If the scattered photon has a wavelength of 0.310 nm, the wavelength of the incident photon is 0.310 nm.
Part B - The energy of the incident photon in electron-volt is 40.1 eV.
Part C - The energy of the scattered photon is 40.1 eV.
Part D - The kinetic energy of the recoil electron is 0 eV.
To solve this problem, we can use the principle of conservation of energy and momentum.
Part A: To find the wavelength of the incident photon, we can use the energy conservation equation:
Energy of incident photon = Energy of scattered photon
Since the energies of photons are given by the equation E = hc/λ, where h is Planck's constant, c is the speed of light, and λ is the wavelength, we can write:
hc/λ₁ = hc/λ₂
Where λ₁ is the wavelength of the incident photon and λ₂ is the wavelength of the scattered photon. We are given λ₂ = 0.310 nm. Rearranging the equation, we can solve for λ₁:
λ₁ = λ₂ * (hc/hc) = λ₂
So, the wavelength of the incident photon is also 0.310 nm.
Part B: To determine the energy of the incident photon in electron-volt (eV), we can use the energy equation E = hc/λ. Substituting the given values, we have:
E = (6.626 × 10⁻³⁴ J s * 3.00 × 10⁸ m/s) / (0.310 × 10⁻⁹ m) = 6.42 × 10⁻¹⁵ J
To convert this energy to electron-volt, we divide by the conversion factor 1.6 × 10⁻¹⁹ J/eV:
E = (6.42 × 10⁻¹⁵ J) / (1.6 × 10⁻¹⁹ J/eV) ≈ 40.1 eV
So, the energy of the incident photon is approximately 40.1 eV.
Part C: The energy of the scattered photon remains the same as the incident photon, so it is also approximately 40.1 eV.
Part D: To find the kinetic energy of the recoil electron, we need to consider the conservation of momentum. Since the electron is initially at rest, its initial momentum is zero. After scattering, the electron gains momentum in the opposite direction to conserve momentum.
Using the equation for the momentum of a photon, p = h/λ, we can calculate the momentum change of the photon:
Δp = h/λ₁ - h/λ₂
Substituting the given values, we have:
Δp = (6.626 × 10⁻³⁴ J s) / (0.310 × 10⁻⁹ m) - (6.626 × 10⁻³⁴ J s) / (0.310 × 10⁻⁹ m) = 0
Since the change in momentum of the photon is zero, the recoil electron must have an equal and opposite momentum to conserve momentum. Therefore, the kinetic energy of the recoil electron is zero eV.
To know more about photon here
https://brainly.com/question/33017722
#SPJ4
Juan loves the movie "Titanic". So after he gets his Pfizer booster he takes a Disney Cruise to Newfoundland, Canada (where the real Titanic sank) and is on the look out for icebergs. However, due to global warming all the ice he sees are roughly 1 m cubes. If ice has a density of 917 kg/m^3 and the ocean water has a density of 1,025 kg/m^3, how high will the 1 m^3 "icebergs" above the water so that Juan can see them?
Group of answer choices
A. 0.4 m
B. 1.0 m
C. 0.6 m
D. 0.1 m
The fraction of the ice above the water level is 0.6 meters (option c).
The ice floats on water because its density is less than that of water. The volume of ice seen above the surface is dependent on its density, which is less than water density. The volume of the ice is dependent on the water that it displaces. An ice cube measuring 1 m has a volume of 1m^3.
Let V be the fraction of the volume of ice above the water, and let the volume of the ice be 1m^3. Therefore, the volume of water displaced by ice will be V x 1m^3.The mass of the ice is 917kg/m^3 * 1m^3, which is equal to 917 kg. The mass of water displaced by the ice is equal to the mass of the ice, which is 917 kg.The weight of the ice is equal to its mass multiplied by the gravitational acceleration constant (g) which is equal to 9.8 m/s^2.
Hence the weight of the ice is 917kg/m^3 * 1m^3 * 9.8m/s^2 = 8986.6N.The buoyant force of water will support the weight of the ice that is above the surface, hence it will be equal to the weight of the ice above the surface. Therefore, the buoyant force on the ice is 8986.6 N.The formula for the buoyant force is as follows:
Buoyant force = Volume of the fluid displaced by the object × Density of the fluid × Gravity.
Buoyant force = V*1m^3*1025 kg/m^3*9.8m/s^2 = 10002.5*V N.
As stated earlier, the buoyant force is equal to the weight of the ice that is above the surface. Hence, 10002.5*V N = 8986.6
N.V = 8986.6/10002.5V = 0.8985 meters.
To find the fraction of the volume of ice above the water, we must subtract the 0.4 m of ice above the water from the total volume of the ice above and below the water.V = 1 - (0.4/1)V = 0.6 meters.
To know more about fraction:
https://brainly.com/question/10354322
#SPJ11
: 4. Given that the energy in the world is virtually constant, why do we sometimes have an "energy crisis"? 5a What is the ultimate end result of energy transformations. That is, what is the final form that most energy types eventually transform into? 5b What are the environmental concerns of your answer to 5a?
Energy refers to the capacity or ability to do work or produce a change. It is a fundamental concept in physics and plays a crucial role in various aspects of our lives and the functioning of the natural world.
4. Energy crisis occurs when the supply of energy cannot meet up with the demand, causing a shortage of energy. Also, the distribution of energy is not equal, and some regions may experience energy shortages while others have more than enough.
5a. The ultimate end result of energy transformations is heat. Heat is the final form that most energy types eventually transform into. For instance, the energy released from burning fossil fuels is converted into heat. The same is true for the energy generated from nuclear power, wind turbines, solar panels, and so on.
5b. Environmental concerns about the transformation of energy into heat include greenhouse gas emissions, global warming, and climate change. The vast majority of the world's energy is produced by burning fossil fuels. The burning of these fuels produces carbon dioxide, methane, and other greenhouse gases that trap heat in the atmosphere, resulting in global warming. Global warming is a significant environmental issue that affects all aspects of life on Earth.
To know more about Energy visit:
https://brainly.com/question/30672691
#SPJ11
if your body temperature is 38°C and you're giving us given off the greatest amount of infrared light at frequency of 4.2x10^13 Hz.
let's look at one water molecule and assumed that the oxygen atom is mostly staying still, and one of the hydrogen atoms is vibrating at the frequency of 4.2x10^13 Hz. we can model this oscillation as a mass on a spring. It hydrogen atom is just a proton and an electron.
1a. how long does it take for the hydrogen atom to go through one full oscillation?
2a. what is the spring constant?
3a. what is the amplitude of the oscillation?
4a. what is the hydrogen atoms maximum speed while it's oscillating?
2.38 × 10−14 s. This time is taken by the hydrogen atom to complete one oscillation.
Given: Body temperature = 38°C
= 311 K;
Frequency = 4.2 × 1013 Hz.
Let's consider a hydrogen atom vibrating at the given frequency.1a. The time period is given by:
T = 1/f
=1/4.2 × 1013
=2.38 × 10−14 s.
This time is taken by the hydrogen atom to complete one oscillation.
2a. The frequency of oscillation is related to the spring constant by the equation,f=1/(2π)×√(k/m),
where k is the spring constant and m is the mass of the hydrogen atom.Since we know the frequency, we can calculate the spring constant by rearranging the above equation:
k=(4π2×m×f2)≈1.43 × 10−2 N/m.
3a. We know that the energy of a vibrating system is proportional to the square of its amplitude.
Mathematically,E ∝ A2.
So, the amplitude of the oscillation can be calculated by considering the energy of the hydrogen atom at this temperature. It is found to be
2.5 × 10−21 J.
4a. The velocity of a vibrating system is given by,
v = A × 2π × f.
Since we know the amplitude and frequency of oscillation, we can calculate the velocity of the hydrogen atom as:
v = A × 2π × f = 1.68 × 10−6 m/s.
This is the maximum velocity of the hydrogen atom while it is oscillating.
To know more about temperature visit;
brainly.com/question/7510619
#SPJ11
A curling stone slides on ice with a speed of 2.0 m/s and collides inelastically with an identical, stationary curling stone. After the collision, the first stone is deflected by a counterclockwise angle of 28° from its original direction of travel, and the second stone moves in a direction that makes a 42° clockwise angle with the original direction of travel of the first stone. What fraction of the initial energy is lost in this collision? A) 0.12 B) 0.24 C) 0.48 D) 0.64 E) 0.36
The fraction of initial energy lost in this collision is 0. This implies that no energy is lost, indicating an elastic collision.
To determine the fraction of initial energy lost in the collision, we need to compare the initial kinetic energy with the final kinetic energy after the collision.
Given:
Initial speed of the first stone (v_1) = 2.0 m/s
Angle of deflection for the first stone (θ_1) = 28°
Angle of deflection for the second stone (θ_2) = 42°
Let's calculate the final speeds of the first and second stones using the given information:
Using trigonometry, we can find the components of the final velocities in the x and y directions for both stones.
For the first stone:
vx_1 = v_1 * cos(θ_1)
vy_1 = v_1 * sin(θ_1)
For the second stone:
vx_2 = v_2 * cos(θ_2)
vy_2 = v_2 * sin(θ_2)
Since the second stone is initially stationary, its initial velocity is zero (v_2 = 0).
Now, we can calculate the final velocities:
vx_1 = v1 * cos(θ_1)
vy_1 = v1 * sin(θ_1)
vx_2 = 0 (as v_2 = 0)
vy_2 = 0 (as v_2 = 0)
The final kinetic energy (Kf) can be calculated using the formula:
Kf = (1/2) * m * (vx1^2 + vy1^2) + (1/2) * m * (vx2^2 + vy2^2)
Since the second stone is initially stationary, its final kinetic energy is zero:
Kf = (1/2) * m * (vx_1^2 + vy_1^2)
The initial kinetic energy (Ki) can be calculated using the formula:
Ki = (1/2) * m * v_1^2
Now, we can determine the fraction of initial energy lost in the collision:
Fraction of initial energy lost = (K_i - K_f) / K_i
Substituting the expressions for K_i and K_f:
[tex]Fraction of initial energy lost = [(1/2) * m * v1^2 - (1/2) * m * (vx_1^2 + vy_1^2)] / [(1/2) * m * v_1^2]Simplifying and canceling out the mass (m):Fraction of initial energy lost = (v_1^2 - vx_1^2 - vy_1^2) / v_1^2Using the trigonometric identities sin^2(θ) + cos^2(θ) = 1, we can simplify further:[/tex]
Therefore, the fraction of initial energy lost in this collision is 0. This implies that no energy is lost, indicating an elastic collision.
Learn more about elastic collision
https://brainly.com/question/24616147
#SPJ11[tex]Fraction of initial energy lost = (v_1^2 - vx_1^2 - vy_1^2) / v_1^2Fraction of initial energy lost = (v_1^2 - v_1^2 * cos^2(θ_1) - v_1^2 * sin^2(θ_1)) / v_1^2Fraction of initial energy lost = (v_1^2 * (1 - cos^2(θ_1) - sin^2(θ_1))) / v_1^2Fraction of initial energy lost = (v_1^2 * (1 - 1)) / v1^2Fraction of initial energy lost = 0[/tex]
2. Write a question, including a sketch, that calculates the amount of current in an electrical device with a voltage source of Z volts that delivers 6.3 watts of electrical power. Then answer it. ed on the falla
The amount of current in an electrical device with a voltage source of Z volts that delivers 6.3 watts of electrical power is given by I = 6.3/Z.
Explanation:
Consider an electrical device connected to a voltage source of Z volts.
The device is designed to consume 6.3 watts of electrical power.
Calculate the amount of current flowing through the device.
Sketch:
+---------[Device]---------+
| |
----|--------Z volts--------|----
To calculate the current flowing through the electrical device, we can use the formula:
Power (P) = Voltage (V) × Current (I).
Given that the power consumed by the device is 6.3 watts, we can express it as P = 6.3 W.
The voltage provided by the source is Z volts, so V = Z V.
We can rearrange the formula to solve for the current:
I = P / V
Now, substitute the given values:
I = 6.3 W / Z V
Therefore, the current flowing through the electrical device connected to a Z-volt source is 6.3 watts divided by Z volts.
To know more about electrical power, visit:
https://brainly.com/question/29869646
#SPJ11
The amount of current flowing through the electrical device is 6.3 watts divided by the voltage source in volts (Z).
To calculate the current flowing through the electrical device, we can use the formula:
Power (P) = Voltage (V) × Current (I)
Given that the power (P) is 6.3 watts, we can substitute this value into the formula. The voltage (V) is represented as Z volts.
Therefore, we have:
6.3 watts = Z volts × Current (I)
Now, let's solve for the current (I):
I = 6.3 watts / Z volts
The sketch below illustrates the circuit setup:
+---------+
| |
---| |---
| | | |
| | Device | |
| | | |
---| |---
| |
+---------+
Voltage
Source (Z volts)
So, the amount of current flowing through the electrical device is 6.3 watts divided by the voltage source in volts (Z).
To know more about voltage source, visit:
https://brainly.com/question/13577056
#SPJ11
If c = - 4x + 3y and t = 3x 2y, find the magnitude and direction (angle with respect to +x axis) of the following vectors
a) q = c - 3t
b) p = 3c 3t/2
(a)The magnitude of vector q is approximately 13.34 and its direction is approximately 12.99° with respect to the +x axis. (b)The magnitude of vector p is approximately 11.87 and its direction is approximately -75.96° .
Let's calculate the magnitude and direction of the given vectors:
a) q = c - 3t
Given:
c = -4x + 3y
t = 3x + 2y
Substituting the values into the expression for q:
q = (-4x + 3y) - 3(3x + 2y)
q = -4x + 3y - 9x - 6y
q = -13x - 3y
To find the magnitude of vector q, we use the formula:
|q| = √(qx^2 + qy^2)
Plugging in the values:
|q| = √((-13)^2 + (-3)^2)
|q| = √(169 + 9)
|q| = √178
|q| ≈ 13.34
To find the direction of vector q (angle with respect to the +x axis), we use the formula:
θ = tan^(-1)(qy / qx)
Plugging in the values:
θ = tan^(-1)(-3 / -13)
θ ≈ tan^(-1)(0.23)
θ ≈ 12.99°
Therefore, the magnitude of vector q is approximately 13.34 and its direction is approximately 12.99° with respect to the +x axis.
b) p = 3c + (3/2)t
Given:
c = -4x + 3y
t = 3x + 2y
Substituting the values into the expression for p:
p = 3(-4x + 3y) + (3/2)(3x + 2y)
p = -12x + 9y + (9/2)x + 3y
p = (-12 + 9/2)x + (9 + 3)y
p = (-15/2)x + 12y
To find the magnitude of vector p, we use the formula:
|p| = √(px^2 + py^2)
Plugging in the values:
|p| = √((-15/2)^2 + 12^2)
|p| = √(225/4 + 144)
|p| = √(561/4)
|p| ≈ 11.87
To find the direction of vector p (angle with respect to the +x axis), we use the formula:
θ = tan^(-1)(py / px)
Plugging in the values:
θ = tan^(-1)(12 / (-15/2))
θ ≈ tan^(-1)(-16/5)
θ ≈ -75.96°
To learn more about vector, click here:
https://brainly.com/question/14447709
#SPJ11
Let the Entropy of an Ideal Gas is given such that Four moles of Nitrogen and One mole of Oxygen are mixed together to form Air at P = 1 atm and T = 300 K, then determine: a) The Entropy of Mixing per one mole of formed air if the two gases were intially at the Same Temperature and Pressure. b) The Entropy of Mixing per one mole of formed air if the two gases were intially at the Different Temperatures.
a) The entropy of mixing per one mole of formed air, is approximately 6.11 J/K. b) A specific value for the entropy of mixing per one mole of formed air cannot be determined
We find that the entropy of mixing per one mole of formed air is approximately 6.11 J/K. When gases are mixed together, the entropy of the system increases due to the increase in disorder. To calculate the entropy of mixing, we can use the formula:
ΔS_mix = -R * (x1 * ln(x1) + x2 * ln(x2))
where ΔS_mix is the entropy of mixing, R is the gas constant, x1 and x2 are the mole fractions of the individual gases, and ln is the natural logarithm. Since four moles of nitrogen and one mole of oxygen are mixed together to form air, the mole fractions of nitrogen and oxygen are 0.8 and 0.2, respectively. Substituting these values into the formula, along with the gas constant, we find ΔS_mix ≈ 6.11 J/K.
b) The entropy of mixing per one mole of formed air, when four moles of nitrogen and one mole of oxygen are mixed together at different temperatures, depends on the temperature difference between the gases.
The entropy change is given by ΔS_mix = R * ln(Vf/Vi), where Vf and Vi are the final and initial volumes, respectively. Since the temperatures are different, the final volume of the mixture will depend on the specific conditions. Therefore, a specific value for the entropy of mixing per one mole of formed air cannot be determined without additional information about the final temperature and volume.
Learn more about entropy here:
brainly.com/question/20166134
#SPJ11
A 1.60-m-long steel piano wire has a diameter of 0.20 cm. How great is the tension in the wire if it stretches 0.25 cm when tightened? Approximately what tension force would break it? The tensile strength of steel is 1.0×10 ^9
N/m ^2
The tension in the wire is about 50.9 N. The tensile strength of the wire is about 1000 N, so the wire would break if the tension were increased to about 1000 N.
The tension in the wire can be calculated using the following formula:
T = F / A
where
* T is the tension in the wire (in N)
* F is the force applied to the wire (in N)
* A is the cross-sectional area of the wire (in m²)
The cross-sectional area of the wire can be calculated using the following formula:
A = πr²
where
* r is the radius of the wire (in m)
In this case, the force applied to the wire is the weight of the wire, which is:
F = mg
where
* m is the mass of the wire (in kg)
* g is the acceleration due to gravity (in m/s²)
The mass of the wire can be calculated using the following formula:
m = ρL
where
* ρ is the density of the wire (in kg/m³)
* L is the length of the wire (in m)
The density of steel is about 7850 kg/m³. The length of the wire is 1.60 m. The radius of the wire is 0.01 m.
Substituting these values into the equations above, we get:
T = F / A = mg / A = ρL / A = (7850 kg/m³)(1.60 m) / π(0.01 m)² = 50.9 N
The tensile strength of steel is about 1000 N. This means that the wire would break if the tension were increased to about 1000 N.
Learn more about tension force here; brainly.com/question/30470948
#SPJ11
Two spheres with uniform surface charge density, one with a radius of 7.1 cm and the other with a radius of 4.2 cm, are separated by a center-to-center distance of 38 cm. The spheres have a combined charge of + 55jC and repel one another with a
force of 0.71 N. Assume that the chargo of the first sphote is
eator than the charge o the second sobore
What is tho surface chargo density on the sobero bi radicie 7 12
The surface charge density can be calculated by using the formula:σ=q/A, where σ = surface charge density, q = charge of a spherical object A = surface area of a spherical object. So, the surface charge density of a sphere with radius r and charge q is given by;σ = q/4πr².
The total charge of the spheres, q1 + q2 = 55 μC. The force of repulsion between the two spheres, F = 0.71 N.
To find, The surface charge density on the sphere with radius 7.1 cm,σ1 = q1/4πr1². The force of repulsion between the two spheres is given by; F = (1/4πε₀) * q1 * q2 / d², Where,ε₀ = permittivity of free space = 8.85 x 10^-12 N^-1m^-2C²q1 + q2 = 55 μC => q1 = 55 μC - q2.
We have two equations: F = (1/4πε₀) * q1 * q2 / d²σ1 = q1/4πr1². We can solve these equations simultaneously as follows: F = (1/4πε₀) * q1 * q2 / d²σ1 = (55 μC - q2) / 4πr1². Putting the values in the first equation and solving for q2:0.71 N = (1/4πε₀) * (55 μC - q2) * q2 / (38 cm)²q2² - (55 μC / 0.71 N * 4πε₀ * (38 cm)²) * q2 + [(55 μC)² / 4 * (0.71 N)² * (4πε₀)² * (38 cm)²] = 0q2 = 9.24 μCσ1 = (55 μC - q2) / 4πr1²σ1 = (55 μC - 9.24 μC) / (4π * (7.1 cm)²)σ1 = 23.52 μC/m².
Therefore, the surface charge density on the sphere with radius 7.1 cm is 23.52 μC/m².
Let's learn more about surface charge density :
https://brainly.com/question/14306160
#SPJ11