The stone makes approximately 1.32 revolutions before coming to rest.
(a) Assuming the kinetic coefficient of friction between steel and stone is 0.30, the equation for the conservation of energy is:
W = ∑F_app
where W is the work done on the system, F_app is the net force acting on the system, and the sum is taken over all forces acting on the system.
The work done on the system is:
W = F_axe * d
where F_axe is the force applied by the axe, and d is the displacement of the stone.
The displacement of the stone is:
d = v_axe * t + v_stone * t_rest
where v_axe is the initial velocity of the axe, t_rest is the time it takes the axe to come to rest, and v_stone is the initial velocity of the stone.
Substituting the given values, we get:
W = (12.0 * 0.30) * d
where d is the distance the stone moves in its circular path.
The distance the stone moves is:
d = r * v_stone
where r is the radius of the grindstone.
Substituting the given values, we get:
d = 0.490 * 87.0 = 40.81
The displacement of the stone can also be found using the fact that the stone is moving in a circular path, so:
d = v_stone * t_rest = 80.0 * t_rest
where t_rest is the time it takes the stone to come to rest.
The time it takes the stone to come to rest is given by:
t_rest = 2 * pi * r / v_stone
Substituting the given values, we get:
t_rest = 2 * pi * 0.490 / 87.0 = 0.0105 rad
The time it takes the axe to come to rest is given by:
t_axe = d / v_axe
Substituting the given values, we get:
t_axe = 40.81 / 12.0 = 3.36 s
The net force acting on the system is the force applied by the axe minus the force of friction:
F_net = F_axe - F_fric
where F_fric is the force of friction between the stone and the grindstone.
The force of friction is given by:
F_fric = F_normal * cos(theta)
where F_normal is the normal force exerted by the axe on the stone, and theta is the angle of friction.
The normal force is given by:
F_normal = F_app / (mu * d)
where F_app is the net force applied to the stone, mu is the coefficient of static friction between the stone and the grindstone, and d is the distance the stone moves.
Substituting the given values, we get:
F_normal = (12.0 * 0.30) / (0.30 * 40.81) = 26.73 N
The angle of friction is given by:
theta = tan[tex]^-1[/tex](mu / F_normal)
Substituting the given values, we get:
theta = tan[tex]^-1[/tex](0.30 / 26.73) = 0.052 rad
The force of friction is given by:
F_fric = F_normal * cos(theta) = 26.73 * 0.052 = 1.42 N
The net force is given by:
F_net = F_axe - F_fric = 12.0 - 1.42 = 10.58 N
The direction of the net force is in the direction of the applied force, so it is downwards.
(b) To calculate the number of turns the stone makes before coming to rest, we can use the equation:
θ = v_θ * t + θ_0
where θ is the angular position of the stone, v_θ is the instantaneous angular velocity of the stone, t is the time it takes for the stone to come to rest, and θ_0 is the initial angular position of the stone.
The angular velocity of the stone is given by:
v_θ = v_stone * cos(θ) / r
where v_stone is the initial velocity of the stone, θ is the angle between the stone's velocity vector and the positive x-axis, and r is the radius of the stone.
The initial angular position of the stone is given by:
θ_0 = θ_rest - θ_axe
where θ_rest is the final angular position of the stone, and θ_axe is the angle the axe makes with the positive x-axis when it comes to rest.
The angle between the stone's velocity vector and the positive x-axis is given by:
θ = 90° - v_stone * t / r
where t is the time it takes for the stone to come to rest.
Substituting the given values, we get:
θ_0 = θ_rest - θ_axe = 0 - 87.0 = -87.0°
The final angular position of the stone is given by:
θ_rest = v_stone * t / r - θ_axe
Substituting the given values, we get:
θ_rest = 12.0 * 0.30 / 0.490 - 87.0 = -67.18°
The angle the axe makes with the positive x-axis is given by:
θ_axe = 90° - v_axe * t / r
Substituting the given values, we get:
θ_axe = 90° - 12.0 * 0.30 / 0.490 = -83.41°
The number of turns the stone makes before coming to rest is given by:
θ = v_θ * t + θ_0
θ = 12.0 * 0.30 * 1 / 0.490 - 87.0 * 0.0105 / 0.490 + (-87.0)
θ = 40.81 * 0.30 / 0.490 + 1.42
θ = 1.32 rad
Therefore, the stone makes approximately 1.32 revolutions before coming to rest.
Learn more about initial velocity
https://brainly.com/question/9365999
#SPJ4
Why must the amplitudes of the energy eigenfunctions in the finite depth box and in the adjoining barrier regions have the same value at the boundary?
The amplitudes of the energy eigenfunctions in the finite depth box and in the adjoining barrier regions must have the same value at the boundary due to boundary conditions.
When solving for the energy eigenfunctions in a finite depth box and adjoining barrier regions, it is important to consider the boundary conditions. At the boundary between the finite depth box and the adjoining barrier regions, the wave function must be continuous and its derivative must be continuous. This means that the amplitudes of the wave function in the two regions must be equal at the boundary. If the amplitudes were not equal, the wave function would not be continuous, violating the boundary conditions and leading to unphysical results.
To learn more about eigenfunctions, click here:
https://brainly.com/question/31391312
#SPJ11
is it possible to develop a reversible heat-engine cycle that is more efficient than a carnot cycle operating between the same temperature limits?
No, it is not possible to develop a reversible heat-engine cycle that is more efficient than a Carnot cycle operating between the same temperature limits.
The reason for this has to do with the second law of thermodynamics, which states that in any heat-engine cycle, some energy will always be lost as heat. This means that no heat-engine cycle can be 100% efficient. However, the Carnot cycle is considered the most efficient possible heat-engine cycle because it achieves the maximum possible efficiency for a given temperature difference.
The Carnot cycle achieves this efficiency by using reversible processes, which means that the cycle can be run backwards with no net energy loss. This is not possible for any other heat-engine cycle, including those that are not reversible, because some energy will always be lost as heat.
So, to answer your question, it is not possible to develop a reversible heat-engine cycle that is more efficient than a Carnot cycle operating between the same temperature limits. The efficiency of the Carnot cycle is the maximum possible efficiency for any heat-engine cycle, and this is due to the laws of thermodynamics.
The Carnot cycle represents the most efficient cycle for a heat engine, as it is an idealized process that assumes reversible operations. Any other reversible heat-engine cycle would have the same efficiency as the Carnot cycle or lower efficiency, but never higher.
To know more about Carnot cycle visit:-
https://brainly.com/question/31645644
#SPJ11
what is the diameter of an aluminum sphere with the same mass as 11 l of water? the densities of water and aluminum are 1000 kg/m3 and 2700 kg/m3 , respectively.
Diameter of the aluminum sphere is ∛ 7.77 m with the same mass as 11 l of water.
Mass of aluminum =11 L
Density of the aluminum=2700 kg/m³
Mass of water=11 L
Density of water=1000 kg/m³
Thickness is characterized as the mass per unit volume. In an article material is firmly pressed. This make sense of how firmly a material is stuffed together.
Density= M/V
V=M/density
= 11 /2700 kg/m³= 4.07m³
The sphere's volume is the amount of space it occupies. This indicates how much space or air a sphere contained. The letter V stands for it. Diameter is the straight distance between the sides of the sphere. It is measured in cubic units and is denoted by d.
Putting the values into the sphere's volume expression,
V= π/6 .d³
4.07 m³ = π/6 .d³
d³ =4.07 m³ .6/3.14= 7.77 m³
d= ∛7.77 m
Learn more about Density:
brainly.com/question/952755
#SPJ4
Is an object with a temperature of 273.2 K hotter than, colder than, or at the same temperature as an object with a temperature of 0°C?a. hotterb. colderc. at the same temperature
The correct answer is at the same temperature
An object with a temperature of 273.2 K is equivalent to 0°C. This is because 0°C is the same as the freezing point of water, and at this temperature, water freezes and becomes a solid.
On the other hand, 273.2 K is the same as the melting point of water, where water changes from a solid to a liquid.
Therefore, an object with a temperature of 273.2 K is at the same temperature as an object with a temperature of 0°C.
This is an example of the Celsius and Kelvin temperature scales being directly related and can be converted from one to the other using the formula: K = °C + 273.15.
To know more about temperature please visit...
brainly.com/question/437822
#SPJ11
find the four-potentials in lorenz gauge due to the time-dependent ideal electric dipole
The four-potential in Lorenz gauge due to a time-dependent ideal electric dipole can be found using the electric dipole moment vector (P) and the Lorenz gauge condition.
The four-potential is represented as (A, φ), where A is the magnetic vector potential and φ is the scalar electric potential.
For a time-dependent electric dipole, the electric dipole moment P can be written as P(t) = p0 * sin(ωt), where p0 is the amplitude of the dipole moment, ω is the angular frequency, and t is the time.
In the Lorenz gauge, the four-potential components A and φ must satisfy the wave equation and the Lorenz condition (∇ · A + 1/c² ∂φ/∂t = 0), where c is the speed of light.
By solving the wave equation for both A and φ and considering the Lorenz gauge condition, we can obtain the four-potential components due to the time-dependent electric dipole. The results will be functions of the dipole moment, its position, and time, allowing us to analyze the electromagnetic fields produced by the dipole.
Learn more about electric dipole here
https://brainly.com/question/24170040
#SPJ11
57. how many volts are needed to illuminate an indicator light on an fm radio that has a resistance of 160ώ, given 24.5 ma passes through it?
To calculate the number of volts needed to illuminate an indicator light on an FM radio, we need to use Ohm's law which states that voltage is equal to the product of current and resistance. In this case, the current passing through the indicator light is 24.5 mA and the resistance is 160 ω.
Using the formula, V=IR, we can calculate the voltage as:
V = (24.5 mA) * (160 ω) = 3.92 volts
Therefore, the indicator light on the FM radio needs 3.92 volts to illuminate. It's important to note that if the voltage is too high, it could damage the indicator light or the circuitry, so it's crucial to use the correct voltage.
you know more about illuminate pls visit-
https://brainly.com/question/29156148
#SPJ11
a class a amplifier has an 8 v pp output that is being applied to a 200 ω load. what is the total ac load power? 640 mw 40 mw 320 mw 80 mw
A class A amplifier has an 8 v pp output that is being applied to a 200 ω load. The total AC load power is 80 mW.
The given output voltage of the class A amplifier is 8 V peak-to-peak. The peak voltage is given by:
Vp = Vpp/2 = 8/2 = 4 V
The RMS voltage is given by:
Vrms = Vp/√2 = 4/√2 = 2.828 V
Using Ohm's law, the current in the load is:
I = Vrms/R = 2.828/200 = 0.01414 A
The power in the load is given by:
P = I^2 * R = 0.01414^2 * 200 = 0.040 mW
However, this is only the power for one-half of the AC cycle. The total AC load power is given by:
Ptotal = 2 * P = 2 * 0.040 = 0.080 mW = 80 mW.
To learn more about AC click here
https://brainly.com/question/2397982
#SPJ11
a uniform ball is released from rest on a no-slip surface, as shown in the figure. after reaching its lowest point, the ball begins to rise again, this time on a frictionless surface. when the ball reaches its maximum height on the frictionless surface, it is
the height of the highest point above the no-slip surface is equal to the height of the lowest point.
When the uniform ball is released from rest on a no-slip surface and reaches its lowest point, all of its potential energy is converted to kinetic energy. At the lowest point, the ball's kinetic energy is maximum and its potential energy is minimum.
As the ball begins to rise again on the frictionless surface, its kinetic energy is converted to potential energy. At the highest point, the ball's potential energy is maximum and its kinetic energy is minimum.
The total mechanical energy of the ball, which is the sum of its kinetic energy and potential energy, is conserved throughout the motion. Therefore, the ball's potential energy at the highest point is equal to its kinetic energy at the lowest point:
mgh = (1/2)mv^2
where m is the mass of the ball, h is the height of the highest point above the no-slip surface, and v is the velocity of the ball at the lowest point.
Since the ball is released from rest, its velocity at the lowest point is:
v = sqrt(2gh)
Substituting this into the previous equation, we get:
mgh = (1/2)mv^2 = (1/2) m (2gh) = mgh
Therefore, the height of the highest point above the no-slip surface is equal to the height of the lowest point. So, when the ball reaches its maximum height on the frictionless surface, it is at the same height as its release point on the no-slip surface.
Visit to know more about No slip surface:-
brainly.com/question/1593442
#SPJ11
if the hydraulic piston exerts a 18 knkn force on the arm at bb , what is the arm's angular acceleration?
Angular acceleration is the rate at which the angular velocity of an object changes over time. It is denoted by the symbol alpha (α) and is expressed in units of radians per second squared (rad/s²).
To calculate the arm's angular acceleration, we need to know the moment of inertia and torque acting on the arm. The moment of inertia is a measure of an object's resistance to rotational motion and depends on the shape and mass distribution of the object. The torque is the product of the force and the distance from the point of rotation at which the force is applied.
Once we know these values, we can use the equation:
α = τ / I
where α is the angular acceleration, τ is the torque, and I is the moment of inertia.
Therefore, without knowing the moment of inertia and torque acting on the arm, we cannot determine the arm's angular acceleration.
To know more about Angular acceleration click this link -
brainly.com/question/29428475
#SPJ11
A ray of light traveling through air at an angle of 46
enters a sheet of crown glass. If nair=1.00 and nwater=1.33, what is the angle of refraction in the glass (in degrees)?
The refraction angle of glass is about 33.82°. To determine the angle of refraction when a ray of light is incident on the crown glass, Snell's law can be applied, which relates the angles of incidence and refraction to the refractive index of the medium involved.
In this case the ray passes through air (n_air = 1.00) and enters the crown glass (n_glass = 1.33).
Snell's law states that the ratio of the sine of the angle of incidence (θ₁) to the sine of the angle of refraction (θ₂) is equal to the ratio of the refractive indices of the two media.
n_air * sin(θ₁) = n_glass * sin(θ₂)
Substituting the given values gives:
1.00 * sin(46°) = 1.33 * sin(θ₂)
To find θ₂, rearrange the equations.
sin(θ₂) = (1.00 * sin(46°)) / 1.33
θ₂ = arcsin((1.00 * sin(46°)) / 1.33)
Using a calculator to evaluate the right side of the equation, we find that θ₂ is approximately 33.82°. Therefore, the refraction angle of glass is approximately 33.82°. Snell's law describes how light bends or refracts as it passes through various media, and the index of refraction determines the degree of that bending. In this case, the light beam travels from a medium with a low index of refraction (air) to a medium with a high index of refraction (crown glass), bending the light in the normal direction. The angle of refraction is less than the angle of incidence and reflects the change in direction of light as it passes through the glass.
For more such questions on Snell's law,
https://brainly.com/question/31576122
#SPJ11
If a particle is connected to a spring, the elastic spring force is expressed by F=ks. The term " s " in this equation is: a. the difference between the deformed length and un-deformed length. b. deformed length of the spring. c. the spring constant. d. un-deformed length of the spring.
The term "s" in the equation F = ks is the difference between the deformed length and the un-deformed length of the spring. This is also known as the displacement of the spring from its equilibrium position.
When a force is applied to a spring, it deforms from its natural, unstretched state. This deformation is measured as the difference between the original length of the spring and its new length under the applied force. This difference is known as the displacement or "s" in the spring force equation.
The spring constant "k" is a measure of the stiffness of the spring, and it determines the magnitude of the force required to deform the spring by a certain amount. The greater the value of "k", the stiffer the spring, and the greater the force required to deform it.
Learn more about spring constants here:- brainly.com/question/14159361
#SPJ11
7.an electrician uses a clamp-on ammeter and a voltmeter to measure the current and voltage of a motor. if the two values are multiplied, is the product the true power or the apparent power?
No, multiplying the current and voltage readings obtained using a clamp-on ammeter and a voltmeter does not give the true power of a motor.
The product of current and voltage gives the apparent power of the motor, which is the product of the voltage and current that are delivered to the motor, without considering the phase angle between them.
To determine the true power of a motor, the electrician needs to measure the power factor, which is the ratio of the true power to the apparent power. The power factor takes into account the phase angle between the voltage and current, which can affect the efficiency of the motor.
Once the power factor is known, the true power of the motor can be calculated by multiplying the apparent power by the power factor. Alternatively, if the motor's resistance and reactance are known, the true power can be calculated using other formulas that take into account these values.
In summary, to accurately measure the power of a motor, an electrician needs to use a combination of instruments that can measure voltage, current, and power factor.
Learn more about voltmeter
https://brainly.com/question/8505839
#SPJ4
6. Which color of light has a longer wavelength: red or green?
Answer:
Red
Explanation:
The visible colors from shortest to longest wavelength are: violet, blue, green, yellow, orange, and red.
So red has a longer wavelength than green.
when you walk through still air at a rate of 1 m/s, would you expect the character of the airflow around you to be most like that depicted in fig. 9.6a, b, or c? explain.
Based on the information given, I would expect the character of the airflow around you to be most like that depicted in figure 9.6a. This is because figure 9.6a shows laminar flow, which is a smooth, steady flow of air. At a slow walking speed of 1 m/s, the air around you is not likely to be turbulent, as depicted in figures 9.6b and 9.6c. Turbulent flow occurs when the velocity of the air exceeds a certain threshold, which is unlikely to happen at a walking speed. Therefore, laminar flow in figure 9.6a is the most appropriate representation of the airflow around you when walking through still air at a rate of 1 m/s.
For more question like airflow visit the link below:
https://brainly.com/question/29250379
#SPJ11
What are the three main events in the story the legend of sleepy hollow
(c) if the average intensity of the wave is 1 watt/m2, what is the peak value of the magnetic field, b0, of the wave?
The peak value of the magnetic field of the wave is 1.67 × 10^-5 T. The average intensity of the wave is the average power per unit area that is transported by the wave.
The peak value of the magnetic field, b0, of an electromagnetic wave can be determined using the equation b0 = √(2μ0ε0Iav), where μ0 is the permeability of free space, ε0 is the permittivity of free space, and Iav is the average intensity of the wave. Substituting the given values, we get b0 = √(2 × 4π × 10^-7 × 8.85 × 10^-12 × 1) = 1.67 × 10^-5 T.
Therefore, the peak value of the magnetic field of the wave is 1.67 × 10^-5 T.
It is related to the electric and magnetic fields of the wave by the equations Iav = 1/2ε0cE0^2 and Iav = c/2μ0b0^2, where c is the speed of light in vacuum. By equating these two equations and solving for b0, we obtain the equation b0 = √(2μ0ε0Iav). This equation relates the peak value of the magnetic field of the wave to its average intensity.
Learn more about magnetic field here:
brainly.com/question/11285755
#SPJ11
what is the greatest magnitude of the orbital angular momentum l for an electron in a state with principal quantum number n
The greatest magnitude of the orbital angular momentum L in units of h-bar for an electron in a state with principal quantum number n = 9 is 9h-bar.
According to the quantum mechanics, the orbital angular momentum L of an electron is given by the expression L = nh-bar, where n is the principal quantum number. The value of n determines the energy and the size of the electron's orbit. For a given value of n, the maximum value of L is n-1, which occurs when the electron is in a state with maximum angular momentum. In this case, n = 9, so the maximum value of L is 8h-bar.
However, the question asks for the greatest magnitude of L, not the maximum value of L. The magnitude of L is given by the expression L = ±(l(l+1)h-bar) ^1/2, where l is the orbital quantum number. For a given value of n, the maximum value of l is n-1, so in this case, the maximum value of l is 8. Thus, the greatest magnitude of L is found by plugging in l = 8 into the expression for L and taking the absolute value, which gives L = 9h-bar. Therefore, the greatest magnitude of the orbital angular momentum L in units of h-bar for an electron in a state with principal quantum number n = 9 is 9h-bar.
Learn more about magnitude here:
brainly.com/question/14123452
#SPJ11
Complete Question:
What is the greatest magnitude of the orbital angular momentum L in units of h-bar for an electron in a state with principal quantum number n = 9?
you build a circuit with three incandescent bulbs in parallel one day in the phys 251 laboratory. bulbs 1 and 2 are identical, but bulb 3 has a larger resistance. bulb 1 burns out (becomes a break). we can say that:
If bulb 1 burns out in a parallel circuit with three incandescent bulbs, bulbs 2 and 3 will remain lit, but the overall resistance of the circuit will decrease, resulting in an increase in the total current flowing through the circuit.
In a parallel circuit, each bulb has its own path to the power supply, so if one bulb burns out, the current can still flow through the other bulbs. Bulbs 2 and 3 in this case will remain lit because they are still receiving the same voltage as before, but the overall resistance of the circuit will decrease due to the absence of bulb 1. This is because the resistance of the circuit is determined by the sum of the individual resistances of each bulb, and with one bulb removed, the total resistance of the circuit decreases.
Since the voltage across the circuit remains the same, the decrease in resistance results in an increase in the total current flowing through the circuit, which can cause the remaining bulbs to become brighter than they were before. It is important to note that the increase in current could potentially cause bulb 3 to burn out faster than it would have if all three bulbs were still functioning, as it is the bulb with the larger resistance and therefore may not be able to handle the increased current.
Learn more about resistance here:
brainly.com/question/17044230
#SPJ11
to find the focal point of the lens, a. move the viewing screen until the image is upright b. move the viewing screen until no image is formed c. move the viewing screen until the image is inverted
To find the focal point of a lens, move the viewing screen until the image is either upright or inverted. The focal point is reached when a clear and sharp image is formed.
The focal point of a lens is the point where parallel rays of light converge or appear to diverge from after passing through the lens. To find the focal point, you can adjust the position of the viewing screen until you achieve a clear and sharp image.
In the case where you move the viewing screen until the image is upright, you are looking for the position where the image formed by the lens is upright and in focus. This position corresponds to the focal point of the lens, where the light rays converge to form the image.
On the other hand, if you move the viewing screen until the image is inverted, you are still seeking the focal point. In this case, the image formed by the lens appears inverted, indicating that the light rays have crossed and converged at the focal point.
However, if you move the viewing screen to a position where no image is formed, it suggests that the screen is either too close or too far from the lens. This position does not correspond to the focal point, as no clear image is obtained.
Therefore, by adjusting the position of the viewing screen until an upright or inverted image is achieved, you can determine the location of the focal point of the lens.
Learn more about focal point : brainly.com/question/11210390
#SPJ11
if a resistor that is color-coded yellow-violet-brown-gold is connected to a 12 v source, then what is the current flow?
The current flow through the resistor when it is connected to a 12 V source is approximately 0.255 mA.
The color code yellow-violet-brown-gold corresponds to a resistor with a nominal value of 47 kΩ and a tolerance of +/- 5%.
To calculate the current flow through the resistor when it is connected to a 12 V source, you need to apply Ohm's Law, which states that the current (I) through a resistor is equal to the voltage (V) across the resistor divided by its resistance (R):
I = V / R
Substituting the values, we get:
I = 12 V / 47 kΩ
I = 0.000255 A or 0.255 mA (rounded to three significant figures)
Therefore, the current flow through the resistor when it is connected to a 12 V source is approximately 0.255 mA.
Visit to know more about Current:-
brainly.com/question/1100341
#SPJ11
numerical forecast models with ________ scales can predict weather phenomena with ________ detail.
Numerical forecast models with smaller scales can predict weather phenomena with higher detail.
Numerical forecast models are computer simulations that use mathematical equations to predict future weather conditions. These models divide the atmosphere into a grid system, with each grid representing a specific area.
The size of the grid cells determines the scale of the model. Smaller-scale models have smaller grid cells and can capture more localized features and fine-scale atmospheric processes. This allows them to provide more detailed predictions of weather phenomena such as thunderstorms, local winds, and precipitation patterns.
In contrast, larger-scale models have larger grid cells and are better suited for capturing broader weather patterns like fronts and large-scale circulation. Therefore, models with smaller scales have the ability to predict weather phenomena with higher detail due to their finer resolution.
For more questions like Weather click the link below:
https://brainly.com/question/12426129
#SPJ11
based on your answer to part a, which of the following best describes why the distance from earth to the galaxy increases as the balloon expands?
The distance from Earth to the galaxy increases as the balloon expands because of the expansion of space.
As the balloon expands, it stretches the space between galaxies, causing them to move further away from each other. This expansion of space is a fundamental property of the universe and is responsible for the observed redshift of light from distant galaxies. As a result, the further away a galaxy is from us, the faster it appears to be moving away due to the expansion of space. This is known as Hubble's law and is one of the key pieces of evidence for the Big Bang theory.
To learn more about galaxy:
https://brainly.com/question/31361315
#SPJ11
If the shaft is subjected to a torque of M=(15t^2) N*m , where t is in seconds, determine the angular velocity of the assembly when t=5s , starting from rest. RodsAB and BC each have a mass of 9kg.
The angular velocity of the assembly at t = 5s is 1250 rad/s
How We calculated the angular velocity?To solve this problem, we need to use the principle of conservation of angular momentum. We can assume that the assembly starts from rest and then find the angular velocity at t = 5s.
The moment of inertia of the assembly can be calculated as the sum of the moments of inertia of the individual components.
In this case, we have two rods, AB and BC, each with a mass of 9kg. The moment of inertia of a rod about its center of mass is (1/12)xmxL[tex]^2[/tex], where m is the mass and L is the length of the rod.
Since each rod has a length of 1m, the moment of inertia of each rod is rod is (1/12)9(1[tex]^2[/tex]) = 0.75 kgxm[tex]^2[/tex].
The moment of inertia of the assembly is then the sum of the moments of inertia of the two rods: I = 2x(0.75) = 1.5 kgxm[tex]^2[/tex].
The torque acting on the assembly is given by M = 15t[tex]^2[/tex] Nxm.
We can now use the equation for angular acceleration: α = τ/I, where α is the angular acceleration, τ is the torque, and I is the moment of inertia.
At t = 5s, the torque is M = 15x(5[tex]^2[/tex]) = 375 Nxm.
Thus, the angular acceleration is α = 375/1.5 = 250 rad/s[tex]^2[/tex].
Starting from rest, the initial angular velocity is ω = 0.
The final angular velocity can be calculated using the equation ω = ω0 + αxt, where ω0 is the initial angular velocity, α is the angular acceleration, and t is the time.
Substituting the values, we get:
ω = 0 + 250x5 = 1250 rad/s
Learn more about angular velocity
brainly.com/question/29557272
#SPJ11
a 3.81 μg particle moves at 1.83×108 m/s. what is its momentum ?
The momentum of a 3.81 μg particle moving at 1.83×108 m/s can be calculated using the formula p=mv, where p is the momentum, m is the mass, and v is the velocity. First, we need to convert the mass from micrograms to kilograms by dividing it by 10^9. So, the mass is 3.81x10^-9 kg. Then, we can substitute the mass and velocity values in the formula to get the momentum as follows: p = (3.81x10^-9 kg) x (1.83x10^8 m/s) = 6.97x10^-1 kg*m/s. Therefore, the momentum of the particle is 6.97x10^-1 kg*m/s.
Your question is: What is the momentum of a 3.81 μg particle moving at 1.83×10^8 m/s?
To calculate the momentum, we use the formula: momentum = mass × velocity. First, convert the mass from micrograms (μg) to kilograms (kg) by dividing by 1,000,000,000. So, 3.81 μg = 3.81 × 10^-9 kg. Now, multiply the mass (3.81 × 10^-9 kg) by the velocity (1.83 × 10^8 m/s) to find the momentum.
Momentum = (3.81 × 10^-9 kg) × (1.83 × 10^8 m/s) = 6.9773 × 10^-1 kg·m/s.
Therefore, the momentum of the particle is approximately 6.98 × 10^-1 kg·m/s.
To know more about momentum visit-
https://brainly.com/question/30677308
#SPJ11
a ladder is at rest leaning against a wall and makes an angle. what is the force of static friction on the ladder from the ground?
The force of static friction on the ladder from the ground depends on the angle at which the ladder is leaning against the wall. To determine the force of static friction, we need to consider the equilibrium conditions.
When the ladder is at rest and not slipping, the force of static friction counteracts the tendency of the ladder to slide down the wall. This force acts in the upward direction along the ladder.
If we assume the ladder is leaning against the wall at an angle θ, the force of static friction can be calculated using the equation:
F_friction = m * g * cos(θ)
where m is the mass of the ladder, g is the acceleration due to gravity, and θ is the angle at which the ladder is leaning.
It's important to note that the maximum force of static friction is limited by the coefficient of static friction (μ_s) and the normal force (N) between the ladder and the ground. If the calculated force of static friction exceeds the maximum static friction force (μ_s * N), the ladder will start to slip.
Therefore, to accurately determine the force of static friction on the ladder from the ground, we would need additional information such as the coefficient of static friction and the normal force acting on the ladder.
Learn more about Ladder here:
https://brainly.com/question/29013068
#SPJ11
a car experiences a centripetal acceleration of 4.9 m/s2 as it rounds a corner with a speed of 15 m/s .what is the radius of the corner?
To find the radius of the corner, we can use the formula for centripetal acceleration:
a = (v^2) / r
Where:
a is the centripetal acceleration (4.9 m/s^2),
v is the speed of the car (15 m/s), and
r is the radius of the corner (unknown).
We rearrange the formula to solve for the radius:
r = (v^2) / a
Plugging in the given values:
r = (15 m/s)^2 / 4.9 m/s^2
Calculating the result:
r = 225 m^2/s^2 / 4.9 m/s^2
r ≈ 45.92 meters
Therefore, the radius of the corner is approximately 45.92 meters. This means that if the car maintains a speed of 15 m/s and experiences a centripetal acceleration of 4.9 m/s^2 while rounding the corner, the radius of the corner is approximately 45.92 meters. The larger the radius, the less sharp the turn, indicating that the car is making a relatively wide turn in this case.
To learn more Centripetal acceleration - brainly.com/question/17123770
#SPJ11
water travels through a pipe at 15.2 m/s. the pipe contracts from a cross sectional area of 1.4 m2 to an area of 0.280 m2. what is the speed of the water in the second part of the pipe in m/s?
The speed of the water in the second part of the pipe is 76 m/s.
According to the principle of conservation of mass, the mass of water flowing through the pipe will remain constant. As the pipe contracts, the speed of the water will increase to maintain this principle. We can use the equation of continuity to solve for the speed of water in the second part of the pipe.
The equation of continuity states that the product of the cross-sectional area and the speed of the fluid is constant along the length of the pipe. Mathematically, we can express it as A1v1 = A2v2, where A1 and v1 are the cross-sectional area and speed of the water in the first part of the pipe, and A2 and v2 are the cross-sectional area and speed of the water in the second part of the pipe.
Substituting the given values, we get:
1.4 x 15.2 = 0.280 x v2
v2 = (1.4 x 15.2) / 0.280
v2 = 76 m/s (rounded to two decimal places)
Therefore, the speed of the water in the second part of the pipe is 76 m/s.
learn more about cross-sectional area Refer: https://brainly.com/question/13945652
#SPJ11
in solar heating applications, heat is stored in some medium until it is needed (i.e., to heat a home at night). should this medium have a high or low specific heat? explain.
In solar heating applications, it is desirable for the medium used to store heat to have a high specific heat. This is because the specific heat of a substance is the amount of heat energy required to raise the temperature of a unit mass of the substance by one degree Celsius. Therefore, a substance with a high specific heat can absorb a large amount of heat energy without a significant increase in temperature. This means that a high specific heat medium can store a large amount of heat energy while remaining at a relatively constant temperature, which is ideal for efficient heat storage. In contrast, a medium with a low specific heat would require a large increase in temperature to store the same amount of heat energy, which could result in thermal losses and reduced efficiency.
For more question like solar heating applications visit the link below:
https://brainly.com/question/31453475
#SPJ11
The place the Sun stops its northward motion along the ecliptic is the
A) equator.
B) prime meridian.
C) summer solstice.
D) vernal equinox.
The place where the Sun stops its northward motion along the ecliptic is the summer solstice.
The summer solstice occurs around June 21st in the Northern Hemisphere and marks the longest day and shortest night of the year. During this time, the Sun reaches its highest point in the sky and appears to stand still or "solstice" (from the Latin words "sol" for Sun and "sistere" for standing still) for a brief period before its direction changes.
At the summer solstice, the Sun's declination is at its maximum value, which means it is at its farthest point north of the celestial equator. After the summer solstice, the Sun begins its southward motion along the ecliptic, leading to shorter days and longer nights as it moves towards the autumnal equinox.
Therefore, the correct answer is C) summer solstice.
To know more about hemisphere please visit:
https://brainly.com/question/501939
#SPJ11
5.0 a of current flows with uniform current density through a wire of 3.0 mm diameter. at what two radii is the magnetic field 3.33 gauss (3.33x10-4 t)? [8 pts]
The magnetic field is 3.33 Gauss at radii of 8.9 mm and 3.8 mm from the center of the wire.
We can use Ampere's Law to find the magnetic field at a distance r from the center of the wire:
∮B·dl = μ₀I,
where B is the magnetic field, dl is a differential element of length around a closed loop, μ₀ is the permeability of free space, and I is the current.
Since the current density J is uniform, we have:
I = JA,
where A is the cross-sectional area of the wire.
For a wire of diameter d, we have:
A = π(d/2)² = πd²/4
So, I = Jπd²/4.
Using these expressions and solving for B, we obtain:
B = μ₀Jr/2
where r is the distance from the center of the wire.
Setting B = 3.33x10⁻⁴ T, we can solve for the values of r:
3.33x10⁻⁴ = 4πx10⁻⁷ x 5.0 x (r/1.5) / 2
r = 0.0089 m = 8.9 mm and r = 3.8 mm.
To learn more about current density click on,
https://brainly.com/question/30889804
#SPJ4