you design an experiment to test the effect of adding different amounts of ice (grams) to a given volume of water.
For each trial you record the initial temperature of the water and then the final temperature after the ice was added.

In this experiment, the amount of ice is the
variable, and the temperature change is the
variable.

We can use the ideal gas law to solve for the volume of oxygen gas produced:

PV = nRT

where P is the pressure, V is the volume, n is the number of moles, R is the ideal gas constant (0.08206 L atm/mol K), and T is the temperature in Kelvin.

First, we need to calculate the number of moles of oxygen gas produced from the given mass of potassium chlorate. We can use the molar mass of KClO3 (122.55 g/mol) and the stoichiometry of the balanced equation:

15.0 g KClO3 x (1 mol KClO3/122.55 g KClO3) x (3 mol O2/2 mol KClO3) = 0.184 mol O2

Now we can solve for the volume of oxygen gas at 756 torr (convert to atm) and 27°C (convert to Kelvin):

P = 756 torr = 0.996 atm

T = 27°C + 273.15 = 300.15 K

n = 0.184 mol

R = 0.08206 L atm/mol K

V = nRT/P = (0.184 mol)(0.08206 L atm/mol K)(300.15 K)/(0.996 atm) = 4.76 L

Therefore, the volume of O2 collected at 27°C and 756 torr pressure is 4.76 L.

Part B:

If the oxygen gas is collected over water, it will be saturated with water vapor. This means that the total pressure in the container will be the sum of the pressure of the oxygen gas and the pressure of the water vapor. The pressure of the water vapor can be calculated using the vapor pressure of water at the given temperature.

At 27°C, the vapor pressure of water is 26.7 torr. Therefore, the total pressure in the container will be:

P total = P oxygen gas + P water vapor = 756 torr + 26.7 torr = 782.7 torr

Since the problem provided the pressure in torr, we need to convert to atm before using the ideal gas law. Therefore, we need to adjust the pressure to:

P = 782.7 torr x (1 atm/760 torr) = 1.03 atm

We can then use the same equation as in part A to calculate the volume of oxygen gas:

V = nRT/P = (0.184 mol)(0.08206 L atm/mol K)(300.15 K)/(1.03 atm) = 4.32 L

Therefore, if the oxygen gas is collected over water, the volume of oxygen gas produced would be 4.32 L instead of 4.76 L (as in part A).

To learn more about ideal gas follow the given link: https://brainly.com/question/15132707

#SPJ1

Answer:

Explanation:Before dividing the initial solution:

Initial volume = 1.0 L

Initial concentration = 0.40 M

After dividing into two equal parts:

Each part has a volume of 0.5 L

The first part has a concentration of 0.40 M

The second part has a concentration of 0.20 M (diluted by 50% with 1.5 L of water)

When the two parts are mixed:

Total volume = 1.0 L + 0.5 L + 0.5 L + 1.5 L = 3.5 L

Total moles of sulfuric acid = (1.0 L x 0.40 M / 1000) + (0.5 L x 0.40 M / 1000) + (0.5 L x 0.20 M / 1000) + (1.5 L x 0 / 1000) = 0.5 mol

Final concentration before adding more sulfuric acid = 0.5 mol / 3.5 L = 0.14 M

When 2.0 L of 0.1 M sulfuric acid are added:

Total volume = 3.5 L + 2.0 L = 5.5 L

Total moles of sulfuric acid = 0.5 mol + (2.0 L x 0.1 M / 1000) = 0.7 mol

Final concentration = 0.7 mol / 5.5 L = 0.13 M

Therefore, the final molar concentration of the solution is 0.13 M.

Answer:

The density equation is given by:

p = 70.5 * exp(82700000 * p)

where p is the pressure in pounds per square inch (lbf/in²) and ρ is the density in pounds per cubic foot (lbm/ft³).

To determine the units of the constants 70.5 and 82700000 in short, we can use dimensional analysis.

The unit of the exponential term is dimensionless, so we only need to consider the units of the constant term.

The unit of the density (ρ) is lbm/ft³, and the unit of the pressure (p) is lbf/in².

So, we can write the equation as:

ρ = (70.5 lbm/ft³) * exp(82700000 * p)

To get the units of the constant 70.5, we can divide both sides by the exponential term and simplify:

ρ / exp(82700000 * p) = 70.5 lbm/ft³

Therefore, the units of 70.5 are lbm/ft³.

To get the units of the constant 82700000, we can rearrange the equation and take the natural logarithm of both sides:

ln(ρ/70.5 lbm/ft³) = 82700000 * p

The units of the left-hand side are dimensionless, and the units of the right-hand side are 1/in². So, the units of the constant 82700000 are 1/in².

Volume is the measure of the space a substance takes up, hence the correct option is A.

Nominal, ordinal, interval, and ratio measurements are the four main types of measurement.

An object or event's attributes are quantified through measurement so that they can be compared to those of other things or events. In other words, measurement is the process of comparing a physical quantity to a fundamental reference quantity of the same kind to determine how big or small it is.

Learn more about measurements here:

https://brainly.com/question/27233632

#SPJ1

One should consider factors such as the process constraints, the process dynamics, and process output requirements.

What are process constraints?

Process constraints are limitations on the process variables due to physical, chemical, or economic factors. A constraint is a limitation or bias on the variability or possibilities of change in the sort of such elements. A constraint is an effort by a group of elements to reduce the degrees of freedom of the elements of a system.

The selection of variables to measure for the control of a chemical process can be quantified using a process flow diagram and a process control hierarchy. The process flow diagram shows the process variables and their relationships, while the process control hierarchy shows the control loops and the measurement and control variables for each loop. The number and type of variables to measure depend on the complexity of the process, the desired control objectives, and the available instrumentation and control technologies.

Therefore, process constraints, the process dynamics, and process output requirements are the factors.

To learn more about process constraints the link

https://brainly.com/question/28346259

#SPJ1

The reaction of 2,2-dichloro-3-methylbutane with water results in the formation of 3-methyl-2-butanol, which can react with OH- in a nucleophilic substitution reaction to form 3-methyl-2-butyl alcohol and water.

The reaction can be represented by the following equation:

2,2-dichloro-3-methylbutane + H2O → 3-methyl-2-butanol + H+ + Cl-

The reaction of 2,2-dichloro-3-methylbutane with water can result in the formation of an alcohol and a hydrogen ion. The product of this reaction is 3-methyl-2-butanol.

The reaction can be represented by the following equation:

2,2-dichloro-3-methylbutane + H2O → 3-methyl-2-butanol + H+ + Cl-

In this reaction, one of the chlorine atoms from 2,2-dichloro-3-methylbutane is replaced by a hydroxyl group (-OH) from water, resulting in the formation of an alcohol group (-OH) in the product, 3-methyl-2-butanol. The other chlorine atom remains as an ion, Cl-.

The product, 3-methyl-2-butanol, can react with OH- in a nucleophilic substitution reaction. In this reaction, the hydroxide ion (OH-) acts as a nucleophile and attacks the carbon atom that is attached to the leaving group (the -OH group) in the 3-methyl-2-butanol molecule. The leaving group then departs with its pair of electrons, forming a new bond with the nucleophile (OH-). The result is the formation of a new alcohol molecule.

The reaction can be represented by the following equation:

3-methyl-2-butanol + OH- → 3-methyl-2-butyl alcohol + H2O

In this reaction, the -OH group of 3-methyl-2-butanol is replaced by the hydroxide ion (OH-) to form 3-methyl-2-butyl alcohol, and a water molecule is formed as a byproduct.

Learn more about hydrogen ion here:

https://brainly.com/question/15082545

#SPJ1

We need to calculate the stoichiometric ratios of the reactants and choose the set that provides the required ratios with the least amount of excess or unused reactants.

To determine the most efficient set of reactants for a reaction, we should consider the stoichiometry of the reaction, which tells us the ratios of the reactants and products that are involved in the reaction. The most efficient set of reactants will be the one that produces the desired product with the least amount of excess or unused reactants, and hence the least amount of waste.

2A + 3B → 4C If we have 4 moles of A and 6 moles of B, we have the exact stoichiometric amounts required for the reaction to proceed, and all the reactants will be consumed completely to form 8 moles of product C. In this case, there will be no waste of materials, and the reaction will be the most efficient. On the other hand, if we have an excess of one of the reactants, for example, if we have 6 moles of A and 6 moles of B, then only 4 moles of A can react with 6 moles of B to produce 8 moles of C, and the remaining 2 moles of A will be unused and wasted. In this case, the reaction will be less efficient.

To know more about stoichiometric ratios visit:-

brainly.com/question/6907332

#SPJ1

Answer:

To calculate the molar mass of the gas, we can use the ideal gas law, which relates the pressure, volume, temperature, and number of moles of a gas:

PV = nRT

where P is the pressure in atmospheres, V is the volume in liters, n is the number of moles, R is the ideal gas constant (0.0821 L·atm/mol·K), and T is the temperature in kelvin.

First, we need to convert the temperature to kelvin:

T = 99.0 °C + 273.15 = 372.15 K

Next, we can calculate the number of moles of gas using the ideal gas law:

n = PV/RT

where P is the pressure in atmospheres (we convert 748 torr to atmospheres by dividing by 760 torr/atm), V is the volume in liters (we convert 250 mL to 0.25 L), R is the ideal gas constant, and T is the temperature in kelvin:

n = (748/760) × 0.25 L / (0.0821 L·atm/mol·K × 372.15 K) = 0.0105 mol

Finally, we can calculate the molar mass of the gas by dividing the mass of the condensed vapor (1.097 g) by the number of moles:

molar mass = mass/number of moles = 1.097 g / 0.0105 mol = 104.38 g/mol

Therefore, the molar mass of the gas is approximately 104.38 g/mol.

Explanation:

The mass of the unknown element cobalt is obtained as 40 g. This can be seen from the calculation that we have in the solution.

If you have a compound that contains an unknown element, you can use the molar mass of the compound to find the relative atomic mass of the unknown element

We can see that the question has already given us the mass of the sample as we have and the percentage of the cobalt that we have in the sample.

50 = x/80 × 100

x = 50/100 × 80

= 40 g

Thus we would have a total of about 40 g of cobalt in the sample.

Learn more about molar mass:https://brainly.com/question/22997914

#SPJ1

Missing parts;

A sample of the compound weighs 80 grams.  If the mass percent of cobalt is 50%, How many grams of cobalt are in the sample?

Answer:

density = mass/volume

Rearranging, we get:

volume = mass/density

Substituting the given values, we get:

volume = 108g / 0.90 g/mL

volume = 120 mL

Therefore, the volume of the material is 120 mL. Answer: C

The density of a substance is its mass by volume. Then, the volume of the 108 g of material with a density of 0.90 g/ml is 120 mL.

Density is a physical property of matter that describes the amount of mass in a given volume of a substance. It is defined as the ratio of an object's mass to its volume.

Mathematically, density is expressed as:

Density = Mass / Volume

The unit of density depends on the units of mass and volume used. For example, in the SI system, the unit of mass is kilograms (kg) and the unit of volume is cubic meters (m³), so the unit of density is kg/m³.

Given that, density = 0.90 g/ml

mass = 108 g

then volume = mass/densiy

v = 108 g/0.900 g/ml = 120 mL.

Therefore, density of the material is 120 mL.

Find more on density:

https://brainly.com/question/29775886

#SPJ2

Most frequently, a salicylates component is used to: Aid in the diagnosis of sudden or progressive aspirin toxicity. When you take a lot of aspirin at once, you might get acutely poisoned.

Blood test results are frequently impacted by prescription medicines, non-prescription pharmaceuticals (such as aspirin, cold medicine, and vitamins), and alcohol consumption. In order to properly interpret the findings of your blood tests, your doctor needs a thorough and candid picture of your medication use.

Aspirin Reaction Units are used to report test findings (ARU). 350-549 ARU is the therapeutic range for people on an antiplatelet regimen to effectively suppress platelets. Those who are not taking aspirin or whose treatment is ineffectively suppressing platelet function have values of 550–700 ARU.

To know more about poisoned visit:

https://brainly.com/question/30334309

#SPJ1

Answer: 2.025

Explanation: Set up the ratio 100ml/78.5g = xml/1.59kg

Once you have your units in order, solve for x and then convert to liters and there you have your answer!

Lipids dissolve in alcohol, a solvent. It removes the skin's lipids, particularly from the stratum corneum.

Because the lipids that normally prevent water loss are removed during alcohol soaking, the rate of water loss increases.

Therefore, water may evaporate more slowly than other liquids despite having a lower molecular weight. The molecules of ethyl (rubbing) alcohol, which are more loosely bound than those of water, evaporate almost five times faster than water. Lower-energy, lower-temperature molecules are left behind when energetic molecules leave a liquid.

The rate of water loss from the skin of a hand was measured. Following the measurement, the hand was soaked in alcohol for 15 minutes. After all the alcohol had been removed from the hand, the rate of water loss was again measured. Compared with the rate of water loss before soaking, what difference, if any, would you expect in the rate of water loss after soaking the hand in alcohol?

Learn more about alcohol:

brainly.com/question/551659

#SPJ1

Answer:

the new concentration of the sodium chloride solution after 300 mL of solvent evaporates is 1.12 M.

Explanation:

To calculate the new concentration of the sodium chloride solution after 300 mL of solvent evaporates, we need to first determine how many moles of solute are present in the original solution:

moles of solute = concentration x volume

moles of solute = 0.70 M x 0.800 L

moles of solute = 0.56 moles

Next, we can calculate the new volume of the solution after 300 mL evaporates:

new volume = original volume - amount evaporated

new volume = 0.800 L - 0.300 L

new volume = 0.500 L

Finally, we can calculate the new concentration of the solution using the moles of solute and the new volume:

new concentration = moles of solute / new volume

new concentration = 0.56 moles / 0.500 L

new concentration = 1.12 M

Therefore, the new concentration of the sodium chloride solution after 300 mL of solvent evaporates is 1.12 M.

The percent by mass of Xe in sample A is calculated as 77.6%.

To calculate the mass percent of an element in compound, we divide the mass of element in 1 mole of compound by the molar mass of compound and multiply the result by 100.

The percent by mass of Xe in sample A can be calculated using the following formula:

percent by mass of Xe = (mass of Xe / total mass of sample) x 100%

Given mass of Xe is 77.6 g and total mass of sample is 100.0 g.

Putting these values into the formula, we get:

percent by mass of Xe = (77.6 g / 100.0 g) x 100% = 77.6%

Hence, the percent by mass of Xe in sample A is 77.6%.

To know more about percent by mass, refer

https://brainly.com/question/26150306

#SPJ1

The vapor pressure of mercury at 25°C is 1.85 torr. To convert the vapor pressure of mercury from mmHg to atm, we can use the conversion factor 1 atm = 760 mmHg:

A liquid's molecules enter the gaseous phase when heated because they have enough kinetic energy to overcome the forces holding them in the liquid. By doing this, they produce a population of molecules in the vapour phase above the liquid, which leads to the creation of a pressure—the liquid's vapour pressure.

1.85  mmHg x (1 atm / 760 mmHg) = 0.00243 atm (rounded to 3 significant digits)

Therefore, the vapor pressure of mercury at 25°C is 0.00243 atm.

To convert the vapor pressure of mercury from mmHg to torr, we can simply use the definition that 1 torr = 1 mmHg:

1.85 mmHg = 1.85 torr (rounded to 3 significant digits)

To know more about vapor pressure visit:-

brainly.com/question/11864750

#SPJ1

Number of moles of S2 needed to produce 750 moles of SO2 is 375.

For more information on moles kindly visit to

https://brainly.com/question/20486415

#SPJ9

Answer:

In a perfect world, where the calorimeter does not exchange any heat with its contents, the amount of heat lost by the hot water will be equal to the amount of heat gained by the cool metal pieces. This is due to the principle of conservation of energy, which states that energy cannot be created or destroyed, only transferred from one form to another. Therefore, the number of calories gained by the metal pieces will be equal to the number of calories lost by the hot water, which is 75 calories.

Explanation:

In summary, according to the principle of conservation of energy, in a perfect world where a calorimeter does not exchange any heat with its contents, the number of calories gained by the cool metal pieces will be equal to the number of calories lost by the hot water, which is 75 calories.

Answer:

(0.22 L) × (1 mL/10^-3 L) × (1.57 g/mL) / (61.04 g/mol) = ?

First, let's simplify the units:

(0.22 L) × (1000 mL/1 L) × (1.57 g/mL) / (61.04 g/mol) = ?

(0.22 L) × (1570 g/mol) / (61.04 g/mol) = ?

Now we can cancel out the units of g/mol:

(0.22 L) × (1570/61.04) = ?

(0.22 L) × 25.73 = ?

5.66 L·g

Therefore, the units of the student's answer are L·g.

A contraption that swiftly prepares food is run by infrared rays. Microwaves employ infrared rays to heat meals by warming any water that may be present.

Numerous food production processes, including drying, boiling, heating, peeling, polyphenol recovery, freeze-drying, antioxidant recovery, microbiological inhibition, sterilizing grains, baking bread, roasting food, making juices, and cooking food, all use infrared technology.

Infrared radiation has the ability to ease or release muscle tension and encourage local blood circulation in the body. Infrared radiation has been used in conventional and modern medicine to treat conditions including autoimmune diseases and issues with wound healing in addition to relieving muscle pain and tension.

To learn more about infrared waves visit:

brainly.com/question/30309627

#SPJ1

Answer:

a. The solute is the substance that is being dissolved, in this case, the red Gatorade mix.

b. The solvent is the substance in which the solute is being dissolved, in this case, water.

c. The solution is the resulting homogeneous mixture of the solute (red Gatorade mix) and the solvent (water).

d. To increase the molarity of the Gatorade in the water, you could add more Gatorade mix to the water while keeping the volume of the solution constant. Alternatively, you could decrease the volume of water while keeping the amount of Gatorade mix constant, which would increase the concentration of Gatorade in the solution.

(Please could you kindly mark my answer as brainliest you could also follow me so that you could easily reach out to me for any other questions)

If you start with 4.55 x 10²⁵ molecules of C₅H₁₂, you would produce 1.82 x 10²⁶ g of H₂.

The balanced equation shows that for every one molecule of C₅H₁₂ that reacts, 2 molecules of H₂ are produced.

C₅H₁₂ --> C₅H₈ + 2H₂

To determine the mass of H₂ produced, we need to convert the number of molecules of C₅H₁₂ to molecules of H₂ using the stoichiometry of the balanced equation:

1 molecule of C₅H₁₂ produces 2 molecules of H₂

4.55 x 10²⁵ molecules of C₅H₁₂ x (2 molecules of H₂ / 1 molecule of C₅H₁₂) = 9.10 x 10²⁵ molecules of H₂

Now, to find the mass of H₂ produced, we need to use the molar mass of H₂, which is approximately 2 g/mol:

9.10 x 10²⁵ molecules of H₂ x (2 g/mol) = 1.82 x 10²⁶ g of H₂

Learn more about reactant mass here; https://brainly.com/question/26682140

#SPJ1

Answer:

9.10 x 10²⁵ molecules of H₂ x (2 g/mol) = 1.82 x 10²⁶ g of H₂

Explanation:

Answer:

The balanced equation for the reaction between sodium hydroxide and sulfuric acid is:

H2SO4 + 2NaOH → Na2SO4 + 2H2O

From this equation, we can see that one mole of sulfuric acid reacts with two moles of sodium hydroxide.

The amount of sodium hydroxide used in the titration is:

n(NaOH) = C(NaOH) x V(NaOH) = 0.246 M x 29.61 mL = 0.007298 moles of NaOH

Since two moles of NaOH react with one mole of H2SO4, the amount of H2SO4 present in the sample is:

n(H2SO4) = 0.007298 moles of NaOH / 2 = 0.003649 moles of H2SO4

The volume of the sulfuric acid solution used in the titration is 10.00 mL. Therefore, the molarity of the sulfuric acid solution is:

M(H2SO4) = n(H2SO4) / V(H2SO4) = 0.003649 moles / 10.00 mL = 0.3649 M

So, the molarity of sulfuric acid is 0.3649 M.

Answer:

1 mole of Cl2 reacts with 2 moles of NaBr to produce 1 mole of Br2.

So, to calculate the number of moles of Br2 produced, we first need to find the number of moles of Cl2 required to react with 5.2 moles of NaBr. Since the stoichiometric ratio of Cl2 to NaBr is 1:2, we need half as many moles of Cl2 as moles of NaBr:

Number of moles of Cl2 = 5.2 moles NaBr / 2 = 2.6 moles Cl2

Now we can use the stoichiometric ratio between Cl2 and Br2 to calculate the number of moles of Br2 produced:

1 mole Cl2 produces 1 mole Br2

Therefore, 2.6 moles Cl2 will produce 2.6 moles Br2.

Explanation:

The thyroid gland produces and secretes two hormones, thyroxine (T4) and triiodothyronine (T3), which are involved in regulating the body's metabolism.

The thyroid gland is regulated by the pituitary gland, which secretes thyroid-stimulating hormone (TSH). When TSH binds to receptors on the thyroid gland, it stimulates the production and secretion of T4 and T3. These hormones play an important role in the growth and development of the body's tissues and organs, including the brain, heart, and muscles.

If there is an overproduction of thyroid hormones, it can lead to hyperthyroidism, which can cause symptoms such as weight loss, nervousness, and rapid heartbeat. On the other hand, an underproduction of thyroid hormones can lead to hypothyroidism, which can cause symptoms such as fatigue, weight gain, and cold intolerance.

To know more about thyroid gland visit:-

brainly.com/question/16867213

#SPJ1

The pressure exerted by the nitrogen gas in the container of volume 10.0L  at a temperature of 298K is 12.14 atm.

Pressure in chemistry is defined as the force per unit area exerted by a gas on the walls of its container. It is the result of the constant, random motion of gas molecules colliding with the walls of the container.

To find the pressure exerted by the N₂ gas, we can use the ideal gas law:

PV = n*R*T

R is the universal gas constant, whose value is constant and is given by 0.0821 L·atm/mol·K

To solve for P:

P = n*R*T/V

Substituting the given values, we get:

P = (0.50 mol) *  (298 K) / (10.0 L)* (0.0821 L·atm/mol·K)

P = 12.14 atm

Therefore, the pressure exerted by the N₂ gas in the 10.0L container at 298K is 12.14 atm.

To find out more about pressure, visit:

https://brainly.com/question/29341536

#SPJ1

The formula for iron(II) bromide is FeBr2, while the formula for barium chloride is BaCl2. The products of the reaction are barium bromide (BaBr2) and iron(II) chloride (FeCl2).

What is Balanced Equation ?

A balanced chemical equation is a symbolic representation of a chemical reaction that shows the relative numbers of reactant and product molecules or ions involved. In a balanced equation, the number of atoms of each element must be the same on both the reactant and product sides, in order to obey the law of conservation of mass.

The balanced chemical equation for the reaction between iron(II) bromide and barium chloride is:

FeBr2 + BaCl2 → BaBr2 + FeCl2

In this reaction, the iron(II) ion (Fe2+) in iron(II) bromide (FeBr2) is replaced by the barium ion (Ba2+) from barium chloride (BaCl2), forming barium bromide (BaBr2) and iron(II) chloride (FeCl2). The balanced equation shows that two bromide ions (Br-) and two chloride ions (Cl-) are involved in the reaction, which ensures that the equation is balanced in terms of both mass and charge.

Learn more about Balanced Equation  from given link

https://brainly.com/question/11904811

#SPJ1

a. The maximum and minimum temperature of a thermocouple is   [tex]-200^{o} C to 350^{o} C[/tex].

Therefore the difference between the actual and indicated temperature is indicated as [tex](125*5 = 625^{o} C/s)[/tex]

c.The time lag between the actual temperature and the indicate temperature is equal to the time constant of the thermocouple.

A sensor that detects temperature is a thermocouple. It is made up of two distinct metals that are attached at one end. A voltage is produced that is linked to temperature when the junction of the two metals is heated or cooled.

Learn more about thermocouple

https://brainly.com/question/16729324

#SPJ9

Answer: 0.1334983576 g

Explanation:

The mass must be conserved on both sides of the equation. Mass put in must must = mass put out. So we must start by finding the mass of the reactants and then the mass of 2H2O. Then we must subtractio the mass of the reactants from the mass of 2H2O which will gives us the mass of CO2.

Mass of CH4:

(12.0107)+ 4(1.00794) = 16.48246 g/mol

we are given three mols of CH4 so divide 3 mol by 16.48246 g/mol

3 mol/ 16.48246 g/mol = 0.1820116657 g CH4

Mass of 2O2:

2(15.99994) = 31.99988 g/mol

we are given 2 moles of 2O2 so divide 2 mol by 31.99988 g/mol  

2 mol/ 31.99988 g/mol = 0.0625002344 g 2O2

Mass of 2H2O:

2(1.00794)+(15.99994) = 18.01582 g/mol

we are given 2 moles of 2H2O so divide 2 mol by 18.01582 g/mol

2 mol/ 18.01582 g/mol = 0.1110135425 g 2H20

Now we add up the grams on the reactatnt side and subtract that number from the mass of 2H2O:

0.1820116657 g CH4 + 0.0625002344 g 2O2 = 0.2445119001 g (total of g of reactants)

0.2445119001 g -  0.1110135425 g =  0.1334983576 g CO2

Capturing quality data and using analytics are critical for the fire and emergency services to improve situational awareness, enhance resource management, improve incident management, and develop better planning and prevention strategies.

What is fire?

Fire is a chemical reaction that occurs when a fuel (such as wood, paper, or gasoline) combines with oxygen in the air, producing heat and light. The reaction is exothermic, meaning it releases energy in the form of heat and light. Fire requires three elements to exist: fuel, oxygen, and heat. These elements are often referred to as the "fire triangle."

Capturing quality data and using analytics are critical for the fire and emergency services for several reasons:

Improved situational awareness: Fire and emergency services need accurate, up-to-date information to make informed decisions and respond effectively to emergencies.

Enhanced resource management: Fire and emergency services often operate under tight budget constraints and need to make the most of their resources.

Improved incident management: The ability to capture and analyze data in real-time can help fire and emergency services manage incidents more effectively.

Learn more about Fire from given link

https://brainly.com/question/26386412

#SPJ1