Answer:
f=90N
Explanation:
2. 4 A stellar atmosphere consists almost entirely of hydrogen. Assume that 50% of the hydrogen molecules are dissociated into atoms and that the pressure is 100 Pa. Given that the binding energy of the hydrogen molecule is 4. 48 eV, estimate the temperature
The estimated temperature in the stellar atmosphere is T = 4.48 / 8.62 x 10^-5 * ln([H2]/4) .
To estimate the temperature of a stellar atmosphere consisting almost entirely of hydrogen, we can use the concept of dissociation equilibrium. When a gas is in equilibrium, the rate of formation of molecules from atoms is equal to the rate of dissociation of molecules into atoms. The dissociation equilibrium constant (Kd) is given by the ratio of the concentration of atoms to the concentration of molecules, at a given temperature and pressure.
In this case, it is given that 50% of the hydrogen molecules are dissociated into atoms, so the concentration of atoms is half the concentration of molecules. The pressure is also given as 100 Pa.
The dissociation equilibrium constant (Kd) can be calculated using the following equation:
Kd = [H]^2 / [H2]
Where [H] is the concentration of atomic hydrogen and [H2] is the concentration of molecular hydrogen.
The equilibrium constant can also be related to the binding energy of the hydrogen molecule (E) and the temperature (T) using the following equation:
Kd = e^(-E/kT)
Where k is the Boltzmann constant.
By combining the above two equations:
[H]^2 / [H2] = e^(-E/kT)
And since we know that [H] = [H2]/2
[H2]/4 = e^(-E/kT)
Now we can solve for T:
T = -E/k * ln([H2]/4)
Given that the binding energy of hydrogen molecule is 4.48 eV and k = 8.62 x 10^-5 eV/K.
T = 4.48 / 8.62 x 10^-5 * ln([H2]/4)
The pressure is not used in the above calculation. The temperature is related to the binding energy and the dissociation equilibrium constant which is dependent on the concentration of the hydrogen molecules and atoms.
It is important to note that the above calculation is a rough estimate and the temperature of a stellar atmosphere can be affected by many other factors such as radiation, convection, and other chemical reactions.
Learn more about binding energy here:
https://brainly.com/question/30073915
#SPJ4
An electron acquires 3. 45×10−16 J of kinetic energy when it is accelerated by an electric field from plate A to plate B.
a. What is the potential difference between the plates?
b. Which plate is at the higher potential? Plate A or Plate B
The potential difference between the plates is 2156V Plate B has the higher potential because the electron moves from A to B as it acquire its own kinetic energy.
Given kinetic energy of electron (KE) = 3.45×10^−16 J
The electron is accelerated from plate A to plate B by an electric field.
We know kinetic energy = charge of electron x potential difference.
So, KE = -qV where q = 1.6 x 10^-19C which is charge of electron.
-3.45×10^−16 = -1.6 x 10^-19 x V
V = 3.45×10^−16/1.6 x 10^-19 = 2156V
Sine the potential difference is positive we can say that plate B has higher potential that plate A.
To learn more about kinetic energy click here https://brainly.com/question/26472013
#SPJ4
. A stuntman rode his motorcycle for seven straight hours on the wall of a large vertical cylinder.
His average speed was 45 km/hr. Suppose that in a time of 30 seconds, he increases his speed
steadily from 8.3 m/s to 11.7 m/s while circling inside the cylindrical wall. How far does he
travel in the time interval in meters?
He travels a distance of 300 m in that time interval.
What is the distance that he travels?We know that we can be able to obtain the time that he travelled if we use the formula that applies to the average speed. In this case we are told in a time of 30 seconds, he increases his speed steadily from 8.3 m/s to 11.7 m/s.
Thus;
distance = Average speed/Time
Distance = (8.3 + 11.7/2) * 30
Distance = 300 m
We can see that he would move through a distance of well about 300m as the velocity is increasing as shown here.
Learn more about average speed:https://brainly.com/question/12322912
#SPJ1
C) The man raises his body a vertical distance of 0. 63 m to go from stage 1
to stage 2. Calculate the work done by the man. Use your answer to part
(b)Use the equation: work done = force x distance
The work done by the man in lifting his body is 493.92J.
What is work done?
When an object is moved over a specific distance by an external force, the quantity of energy transferred to it is called work. The quantity of energy transmitted to an object through work is referred to as the work done on the thing. Since the man raises his body a vertical distance of 0.63m to go from stage 1 to stage 2 he is doing work against gravity. So, the work done in this case is given by W=mgh where m is the mass of the body, g is the acceleration due to gravity and h is the height raised by the body.
Now, according to the question
Mass of the man=80Kg
Height raised by the man=0.63m
Acceleration due to gravity=9.8
On substituting the values in the given formula, we get the work done as
W=80×9.8×0.63
W=493.92J
Therefore, the work done by the man is 493.92J.
To know more about the work done, visit the link:
brainly.com/question/28708867
#SPJ4
a person throws a rock straight up into the air. at the moment it leaves the person's hand it is going 29 mph. when the rock reaches its peak, how fast is it going and what is the magnitude and direction of its acceleration? ignore air drag. express your answer using appropriate mks units.
In a downward direction, the magnitude of the acceleration is negative and velocity is zero.
What is acceleration?The rate of change in velocity is defined as acceleration.The rate at which speed changes with time, in terms of both speed and direction.If a factor or an object moves in a straight line, it is said to be extended.The acceleration of the Earth is always downward.As a result, when an object is launched upward, its acceleration is directed downward.If the object is moving downward, so is the acceleration.Here,
The object would cease to move at the maximum height, and thus the velocity of the object at the peak of motion would be seen to be zero. In this case, the acceleration would be negative.To learn more about acceleration refer to :
https://brainly.com/question/460763
#SPJ4
if the radius of a planet is larger than that of earth by a factor of 7.01, how much bigger is the volume of the planet than earth's?
The radius of a planet is 7.01 times of earth's. The volume of the planet is 344.47 times bigger than the volume of earth.
Let's assume that the shape of both planets are perfect spheres. The volume of a sphere is given by:
V = 4/3 πr³
Where r is the radius.
Hence, the volume is directly proportional to r³, or:
V ∝ r³
Let:
r_p = radius of the planet
r_e = radius of earth
Then,
r_p = 7.01 r_e
Using direct proportionality:
V_p : V_e = r³_p : r³_e
V_p : V_e = (7.01 r_e)³ : r³_e
V_p : V_e = 344.47 : 1
V_p = 344.47 V_e
Therefore, the volume of the planet is 344.47 times bigger than earth's.
Learn more about proportion here:
https://brainly.com/question/22807400
#SPJ4
what is the minimum number of degrees that the star below could be rotated so that it would look exactly the same as it did at its starting point?
The minimum number of degrees is 108°.
Based on the accompanying figure,
The angle of rotation from point A to point B is the smallest angle at which the star can overlap itself.
Let a° be the angle formed by A and B.
By connecting the star's vertices, we can form a pentagon.
The formula to calculate a polygon's internal angle is
The internal angle measurement is
=> 180 x (n-2)/n
=> 180 x (5-2)/5
=> 180 x 3/5
=> 36
ABC measured as:
= 108°
Since the inner angle is divided into three equal parts by a side star,
36° is the internal angle measurement.
the AOB,
The sum of a triangle's inner angles is 180 degrees, or m(OAB) + m(AOB) + m(ABO).
36° + a + 36° = 180°
a + 72° = 180°
a = 180 - 72
a = 108°
To learn more about Minimum angle :
https://brainly.com/question/29079675
#SPJ4
The full question is :
What is the minimum angle of rotation (in degrees) that will carry the star onto itself?
a rock with mass of 7.45 kg is thrown straight up with a force of 497 n gravity is 9.81 what is the net acceleration of the rock
The net acceleration working on the rock is 56.9 m/s² in upward direction, if the mass of the rock is 7.45 kg and the force applied on it is 497 N.
The upward force applied on the rock, F = 497 N
Mass of the rock, M = 7.45 kg
Acceleration due to gravity, g = 9.81 m/s²
We know force = Mass × Acceleration
Acceleration produced in the rock due to the force applied, a = 497/7.45
= 66.71 m/s²
Acceleration due to gravity is working downward, so net acceleration working on the rock, = 66.71 - 9.81 = 56.9 m/s²
To know more about acceleration, here
https://brainly.com/question/12550364
#SPJ4
The maximum horizontal distance a boy can throw a ball is 50 m. Assume he can throw
with the same initial speed at all angles. How high does he throw the ball when he throws
it straight upward?
(Hint: At what angle should the boy throw the ball to get furthest distance?]
The height the ball reaches when the boy throws the ball up in the air is 12.6m.
Given the maximum horizontal distance a boy can throw a ball (s) = 50m
The initial speed of the ball = um/s
The maximum height reached = ym
The motion in vertical direction is given as:
y = ut1 + 1/2at1^2 where v is the speed in vertical direction and a is the acceleration and t1 is the time taken to travel upward distance.
s = 0 + gt^2/2 then t = √2s/g = √2 x 50/9.8 = 3.18s
We know that as the velocity is same at any point in distance travelled distance = speed x time = 50m
So t1 = t/2 as it covers half time when reached maximum height.
The velocity (v) = gt = 9.8 x 3.18 = 31.164m/s
The maximum height reached (y) = vt1 + 1/2gt1^2 where t1 - t/2
y = vt/2 + 1/2g(t/2)^2
y = 50/2 + 1/2(9.8)(3.18/2)^2
y = 12.6m
Hence the maximum height the ball can be thrown is 12.6m.
To learn more about speed click here https://brainly.com/question/28224010
#SPJ4
a pith ball has a shortage of 1.85 x 10^17 electrons. what is the net charge on this ball in coulombs?
The net charge on the pith ball in coulombs when the number of electrons is specified is calculated to be 2.96 × 10⁻² C.
Given that, number of electrons = 1.85 × 10¹⁷
We know the charge on electron as, e = 1.6 × 10⁻¹⁹ C
The relation between charge and number of electrons is known to be,
Q = n e
where, Q is charge
n is number of electrons
e is charge on electron
After putting the values into the equation above, we have,
Q = 1.85 × 10¹⁷ × 1.6 × 10⁻¹⁹ = 2.96 × 10⁻² C
Thus, the net charge is calculated to be 2.96 × 10⁻² C.
To know more about charge:
https://brainly.com/question/26263242
#SPJ4
what did Zhou artisans discover
Iron production was mastered by Zhou craftsmen.
Zhou artisans: what are they?The Zhou dynasty was one of the greatest in Chinese history, and among its many achievements were the artisans who discovered how to make iron. Iron became a common material for agricultural equipment, which was revolutionary for the Chinese people and extremely beneficial for agriculture. Everything became lot easier, quicker, and more efficient as a result.
The Zhou dynasty, which followed the Shang dynasty, was the longest to rule China.
Artisans are individuals who create handicrafts.
What made the Zhou Dynasty famous?Agriculture, education, military planning, Chinese literature, music, philosophical schools of thought, social stratification, as well as political and religious advancements, all benefited from the Zhou Dynasty's considerable cultural contributions.
To know more about Zhou dynasty :
brainly.com/question/6440800
#SPJ1
what is meant by intensity of sound 6.81 times as great as the intenstiy of another sound. relative the the quieter sound, what is the intensity level
The energy of the first sound is 6.81 times bigger than the energy of the second sound, or 6.81 times stronger than the intensity of another sound.
Its intensity is the term used to describe how loud a sound is to an individual. Loudness cannot be quantified objectively since everyone perceives loudness differently. Following is a description of the relative characteristics of the acoustic signal, audio intensity, and sound intensity. The kinetic energy of the mass of air is created by the combination of the source's increasing amplitude and the vibrating surface.
The formula for sound intensity is acoustic power divided by the normal area to the propagation direction.
Learn more about sound:
https://brainly.com/question/29707602
#SPJ4
the equator is characterized by relatively high or low pressure aloft
The equator is characterized by relatively low atmospheric pressure aloft.
What is equator?The equator is a large circle that surrounds Earth and sits on a plane perpendicular to its axis, everywhere being equally far from the geographic poles.
This geographic, or terrestrial, Equator separates Earth's Northern and Southern hemispheres and serves as the fictitious reference line on the planet's surface from which latitude is calculated; in other words, it is the line at latitude 0°.
In hotter equatorial regions, the air above expands, gets less dense, and rises. At this latitude, this causes a low pressure band to form.
Learn more about equator here:
https://brainly.com/question/24203207
#SPJ1
if the string breaks when its tension exceeds 22.5n, what is the maximum speed the object can have at the bottom of the path
If the string is at the breaking point at the bottom of the circle, then the speed of the object at this point is 7.82m/s.
The force transferred through a rope, string, or wire when pushed by forces acting from opposite sides is referred to as tension. The tension force is applied along the entire length of the wire and exerts an equal amount of strain on the bodies at each end. Every physical object that comes into contact with another one applies some sort of force.
At the bottom of the circle,
Let the maximum speed will be V.
It is given when the string breaks its tension exceeds 22.5N
it means, T=22.5N
now, we know,
In a Circular path,
⇒ [tex]\frac{mV^2}{r} = T-mg[/tex]
⇒ [tex]V^{2}=\frac{r}{m}(T-mg)[/tex]
⇒ [tex]V^{2}=r(\frac{T}{m} -g)[/tex]
⇒ [tex]V=\sqrt{r(\frac{T}{m} -g)}[/tex]
According to the question,
m = 0.275KG, r = 0.850m and T = 22.5N
Putting the values, We get,
⇒ [tex]V=\sqrt{(0.850)(\frac{22.5}{0.275}-9.80 )}[/tex]
⇒ [tex]V=7.82m/s[/tex]
To know more about tension
brainly.com/question/29376597
#SPJ4
The complete question is:
A 0.275 Kg ball wings in a vertical circular path on a string L=0.850m long. If the string breaks when its tension exceeds 22.5N, what is the maximum speed the ball can have at the bottom before that happens?
a box of mass 50.0 kg fell from a shelf to the floor 2.00 m below. when the box hit the floor, one corner was crushed while the box came to rest in 0.05 s. what was the average net force applied to the box while it came to rest?
The net force applied by to the box is 6264.2 N, if the mass of the box is 50.0 kg and it comes to rest in 0.05 second.
Free fall height of the box, h = 2.0 m
Free fall velocity of the box just before touching the ground, v = √(2gh)
= √(2×9.81×2) = 6.264 m/s
Final velocity or the box after 0.05 sec, = 0
Time to stop, t = 0.05 sec
We know that the applied force is equal to the rate of change of momentum.
F = m(v-u)/t
F = 50 × (6.264-0)/0.05 = 6264.2
So, F = 6264.2 N
To know more about net force, here
https://brainly.com/question/29261584
#SPJ4
a baseball is thrown vertically into the air with a velocity v, and reaches a maximum height h. at what height was the baseball moving with one-half its original velocity? assume air resistance is negligible.
At the height of 3h/4 meter, the velocity of the baseball will be half of its original velocity v, if it reaches a maximum height h.
Maximum height reached by the baseball, = h
The velocity of the ball at maximum height v₁ = 0
Initial velocity, = v
by the 3rd equation of motion, v₁² = v² - 2gh
0 = v² - 2gh
v² = 2gh
Now let the height at which the velocity will be half of the original velocity = h₁
Then by the 3rd equation of motion,
(v/2)² = v² - 2gh₁
2gh₁ = v² - v²/4 = 3v²/4
h₁ = 3v²/8g
We know v² = 2gh, So
h₁ = 3(2gh)/8g = 3h/4 m.
To know more about velocity, here
https://brainly.com/question/18084516
#SPJ4
indicate which beam scenario will have better resolution- temporal resolution- 10cm sector size, scanning at 18cm or 7cm sector size, scanning at 13cm?
The beam scenario with a 7cm sector size and a scanning rate of 13cm will have better resolution.
This is because the more modest sector size considers a more engaged beam, and the faster scanning rate takes into account more information to be gathered in a more limited measure of time. This results in a higher-resolution image.
In the first scenario, the temporal resolution is 10cm sector size and scanning at 18cm. In this scenario, the sector size is 10cm, which means that the beam is 10cm wide.
The scanning rate is 18cm per second, which means that the beam scans 18cm in one second. The slower scanning rate in this scenario will result in a lower temporal resolution because less data are being collected in the same amount of time.
To learn more about temporal resolution:
https://brainly.com/question/28903864
#SPJ4
how did they control a camera on the moon to perfectly follow the lunar lander as it descended from the surface
To control a camera on the moon to perfectly follow the lunar lander as it descended from the surface, engineers used a combination of tracking systems and software.
First, they used a tracking camera to monitor the descent of the lander. This camera was mounted in a fixed position, and was able to track the movement of the lander in real-time.
Additionally, engineers used software to calculate the exact trajectory of the lander and to calculate the corresponding camera movements. This allowed the camera to perfectly follow the lunar lander as it descended from the surface.
Learn more about control a camera on the moon:
https://brainly.com/question/18126882
#SPJ4
a galaxy has a b-k color of 3.2 magnitudes, where b refers to blue wavelengths and k refers to infrared wavelengths. what is the new b-k color if the luminosity of the galaxy at blue wavelengths rises by a factor of 100, without any change in the luminosity at k wavelengths? [
The b-k colour of a galaxy is a measure of the difference in brightness between the galaxy at blue (b) wavelengths and infrared (k) wavelengths. If the luminosity of the galaxy at blue wavelengths rises by a factor of 100, without any change in the luminosity at k wavelengths, the new b-k colour will be different.
We can use the following equation to calculate the new b-k colour:
b-k = -2.5 * log(Lb/Lk)
Where Lb and Lk are the luminosity of the galaxy at blue and infrared wavelengths, respectively.
Given that the luminosity at blue wavelengths has increased by a factor of 100 and the luminosity at k wavelengths has remained unchanged, the new b-k colour can be calculated as:
b-k = -2.5 * log(100*Lb/Lk) = -2.5 * log(100) + b-k = -2.5 * 2 + 3.2 = -0.8 + 3.2 = 2.4
Therefore, the new b-k colour of the galaxy is 2.4 magnitudes.
Learn more about Luminosity here: https://brainly.com/question/14140223
#SPJ4
A spring has a constant of 2000 N/m. If 1000 kg is placed on the spring
how far in meters will it compress?
The compression in the spring will be 4.9m
What is spring force?
The force needed to compress or extend a spring attached to an object is known as the spring force. A spring exerts an equal and opposite force on a body when the object exerts a force on it. It always acts to bring mass back to its equilibrium. Spring force exerted by the spring on the body is given by = where k is the spring constant of the spring x is the compression or extension caused in the spring. To find the x we can use this formula.
Now, according to the question we have
Spring constant=2000N/m
Mass attached to the spring=1000Kg
On substituting the values in the above formula, we get the compression as
F=kx
mg=kx
1000×9.8=2000×x
x=4.9m
Therefore, the compression in the spring is 4.9m
To know more about spring force, visit the link:
brainly.com/question/20785296
#SPJ4
g if the prism is surrounded by a fluid, what is the maximum index of refraction of the fluid that will still cause total internal reflection within the prism?1
Therefore, the highest fluid index of refraction at which we can still produce entire internal reflection is 1.34.
What occurs when light is refracted?A wave bends when it reaches a medium with a different speed, which is known as refraction. When light travels through a slow medium after traveling through a fast medium, the light ray is bent in the direction of the boundary between the two media.
Explain to children what refraction is.When light travels from one material to another and changes direction or bends, this is known as refraction. When light strikes water, for instance, it refracts after passing through the air. This may cause a straw in a glass of water to seem twisted at the surface.
To know more about Refraction visit:
https://brainly.com/question/14760207
#SPJ4
the ability to do activities for more than a few minutes is
The ability to do activities for more than a few minutes is called aerobic ability.
Endurance is the ability to maintain an activity for extended periods of time and usually refers to aerobic ability. For example, children can play actively for hours. We need this ability to perform repetitive activities of daily living, such as stirring food while cooking, using a hair dryer to dry our hair, or walking up steps.
Recreational and job-related activity also often require a high level of endurance. Local muscle endurance is best defined as the ability to resist muscular fatigue and demonstrate how a given type of contraction can be sustained, typically measured in terms of the number of repetitions.
To know more about aerobic ability, here
https://brainly.com/question/4446990
#SPJ4
a proton orbits just at the surface of a charged sphere of radius 4.43 cm. if the speed of the proton is 3.22 x105 m/s, what is the charge on the sphere?
The charge on the sphere is found to be 1.5 x 10⁻¹⁵ C.
The proton is orbiting the surface of the charged sphere of radius 4.43 cm and the speed of the proton is 3.22 x 10⁵m/s. The charge on proton is 1.6 x 10⁻¹⁹ C and the mass of the proton is 1.67 x 10⁻²⁷ kg.
Now,
For revolving,
Electrostatic forces = Centripetal force
KQq/r² = Mv²/r
Here,
R is the radius of the orbit,
Q and q are the charges of the sphere and the proton,
M is the mass of the proton.
Putting values,
9 x 10⁹ x Q x 1.6 x 10⁻¹⁹/0.0443 = 1.67 x 10⁻²⁷ x 3.22 x 10⁵
Q = 1.5 x 10⁻¹⁵ C
So, the charge on the sphere is 1.5 x 10⁻¹⁵ C.
To know more about Charge, visit,
https://brainly.com/question/18102056#:~:text=Expert%2DVerified%20Answer&text=Protons%20have%20a%20positive%20%2B%20charge,for%20the%20protons%20and%20neutrons.
#SPJ4
a bullet is fired straight up and takes 14.8 s to reach its peak. determine how high the bullet goes and its initial velocity (magnitude
The bullet goes up to the height of 1074.6 m, and its initial velocity was 145.2 m/s, If the bullet takes 14.8 sec to reach its peak.
Time taken by the bullet to reach its peak, t = 14.8 sec
Velocity after 14.8 sec, v = 0
Let the initial velocity, = u
Acceleration working on the bullet, a = -g = -9.81 m/s²
By the first equation of motion,
v = u + at
0 = u - 9.81 × 14.8
u = 145.2 m/s
Let the highest peak reach by the bullet is h meter, then by using the second equation of motion,
h = ut + 0.5at²
h = (145.2 × 14.8) + 0.5(-9.81)(14.8)²
h = 1074.6 m
To know more about initial velocity, here
https://brainly.com/question/9365999
#SPJ4
Now imagine the same bouncing basketball as it is moving down. Does it have a positive or a negative acceleration? Why?
Imagine the same bouncing basketball as it is moving down, it is having a negative acceleration, as it is moving down.
This is because acceleration is defined as the rate of change of velocity, and negative acceleration occurs when an object's velocity is decreasing. The basketball is moving down, it is losing height, and its velocity is decreasing, thus it has a negative acceleration. To be more precise, the negative acceleration of the basketball is due to the force of gravity acting upon it, which is pulling it down toward the earth. The force of gravity is a constant force, acting downward, and it causes all objects to accelerate downward at a rate of 9.8 m/s^2 (on the surface of the earth).
To know more about acceleration please refer: https://brainly.com/question/12550364
#SPJ4
two point charges are separated by a distance of 60.0 cm. the numerical value of one charge is twice that of the other. each charge exerts a force of magnitude 85.0 n on the other. 1) find the magnitude of the charge with a smaller magnitude.
The magnitude of the charge with a smaller magnitude is 2.42 × 10⁴ Coulomb. The result is obtained by using the formula for electrostatic force.
What is the formula for electrostatic force?The formula for electrostatic force is
F = kq₁q₂/r²
Where
F = electrostatic force (N)k = Coulomb's constant (9 × 10⁹ Nm²/C²)q₁ and q₂ = charges (C)r = distance between the charges (m)Two point charges are separated.
We have
r = 60 cm = 0.6 mq₁ = 2q₂F = 85 NFind the smaller magnitude of the charge!
The smaller magnitude of the charge is q₂.
We use the formula above to find q₂.
F = kq₁q₂/r²
85 = (9×10⁹)2q₂q₂/(0.6)²
85 = (18×10⁹)q₂²/0.36
q₂² = (18×10⁹)/(85×0.36)
q₂² = (18×10⁹)/30.6
q₂² = 5.88 × 10⁸
q₂ = √(5.88 × 10⁸)
q₂ = 2.42 × 10⁴ Coulomb
Hence, the smaller magnitude of the charge is 2.42 × 10⁴ Coulomb.
Learn more about electrostatic force here:
https://brainly.com/question/30299443
#SPJ4
a merry-go-round rotates at the rate of 0.27 rev/s with an 85 kg man standing at a point 2.2 m from the axis of rotation. what is the new angular speed when the man walks to a point 0 m from the center? consider the merry-go-round is a solid 67 kg cylinder of radius of 2.2 m. answer in units of rad/s.
The new angular speed of the merry go round after the man came to the point 0m on the merry go round will be 1.37 rev/s.
The merry go round is rotating at the speed of 0.27 rev/s with a man of mass 85 kg on it at a pint of 2.2 m form he center of the axis of rotation.
We have to find the new speed of the merry go round when the person walk to the center of the circle.
The mass and radius of the merry go round are given to be 67 kg and 2.2m.
Using the conservation of momentum as the system is not under any external force,
Initial momentum = final momentum
I₁W₁ = I₂W₂
I₁ and W₁ are initial moment of inertia and angular speed, I₁ and W₁ are final moment of inertia and angular speed.
Putting values,
(85+67)(2.2)₂0.27 = (67)W₂
1.34 rev/s = W₂
So, the final angular speed is 1.34 rev/s.
To know more about Angular speed, visit,
https://brainly.com/question/25279049
#SPJ4
a propeller plane and a jet travel 3000 miles. the velocity of the plane is 1/3 the velocity of the jet. it takes the prop plane 10 hours longer to complete the trip. what is the velocity of the jet?
The velocity of the jet is calculated to be 900 miles/hr when the relation between velocities of both propeller and the jet is given.
The distance travelled by a propeller plane and a jet = 3000 miles
Velocity of the plane Vp = 1/3 Velocity of the jet Vj
Vp = 1/3 Vj
Vj = 3 Vp ----(1)
Time taken by the propeller plane to complete the trip = 10 hours
Velocity of the propeller plane = Distance of the propeller plane/Time
⇒ 3000/10 = 300 miles/hr
The velocity of the jet = 3 times the velocity of the propeller plane
⇒ 3 × 300 miles/hr = 900 miles/hr
To know more about velocity:
https://brainly.com/question/3203266
#SPJ4
does sound travel faster in warm air or in cold air? in humid air or dry air?
In warm air, sound travels more quickly than in cold air. Since the speed of sound is directly inversely proportional to the square root of the air's absolute temperature, the speed of sound rises with temperature.
Additionally, dry air travels faster than humid air for sound. The speed of sound is slightly affected by humidity, with sound traveling slightly slower in more humid air. This is due to the fact that airborne water vapor has the ability to slow down sound waves by absorbing some of their energy.
What is moisture?The amount of water vapor in the air is measured by humidity. At a given temperature, it is typically expressed as a percentage of the maximum amount of water vapor that the air can hold.
It is said that the air has a humidity of 100 percent when it is saturated. Any additional water vapor will condense into liquid or solid form (such as dew, fog, clouds, or precipitation) because the air cannot hold any more water vapor at this point. The air can hold more water vapor and is less likely to reach 100% humidity as the temperature rises.
Specific humidity or mixing ratio, which is the ratio of the mass of water vapor in the air to the mass of the air as a whole, is another way to measure humidity.
The weather and climate can be significantly affected by humidity. High humidity can cause clouds to form and precipitation to fall. It can also make the air feel hotter. Low humidity can make the air feel cooler, make it dry, and make wildfires more likely. The human body is also affected by humidity; low humidity can dry out the skin and nasal passages, while high humidity can make it difficult to cool down and can exacerbate respiratory issues.
To know more about respiratory problems :
brainly.com/question/7048893
#SPJ4
the resultant of a 40-n force at right angles to a 30-n force is
The magnitude of resultant force of the two forces (40 N and 30 N) at right angles is 50 N.
The Pythagorean theorem is used to calculate the consequence of two forces acting at right angles to one another. According to the Pythagorean theorem, the square of the hypotenuse, the longest side opposite the right angle, in a right triangle, equals the sum of the squares of the other two sides. (the two shorter sides).
In this instance, the two forces combine to form the triangle's two shorter sides, with the hypotenuse as the third force.
Therefore, the amount of the resulting force can be determined as follows:
⇒ √(40² + 30²) = √(1600 + 900) = √2500 = 50 N
Hence, the magnitude of the resultant force of the two forces (40 N and 30 N) at right angles is 50 N.
To know more about force:
https://brainly.com/question/7932831
#SPJ4