you are developing a mind map for determining which material is the best conductor of electricity. at which stage in the process will you list each of the individual materials you will use in the experiment?

The moon revolves around the earth approximately 13.37 times when the earth makes one revolution around the sun.

The time taken by the earth to complete one revolution around the sun is approximately 365.25 days. On the other hand, the time taken by the moon to revolve around the earth once is approximately 27.3 days.

To find out how many times the moon revolves around the earth when the earth makes one revolution around the sun, we can divide the time taken by the earth to complete one revolution around the sun by the time taken by the moon to revolve around the earth once:

365.25 days/27.3 days ≈ 13.37

This means that the moon revolves around the earth approximately 13.37 times when the earth makes one revolution around the sun. However, this is an average value, as the actual number of lunar revolutions may vary depending on the position of the moon in its orbit around the earth at a given time.

To learn more about revolution click on,

https://brainly.com/question/30417317

#SPJ4

The reflection of the first wave in the rope is what causes the second wave to occur.

When two waves with the same wavelength and amplitude move at the same speed in opposite directions along the same path, standing waves are created.

The necessary condition for the formation of a standing wave is that, two waves travelling on the same medium in opposite directions must have the same frequency and with the same peak values.

The reflection of the first wave as it travels down the rope causes the second wave to occur.

We are able to create standing waves because of the wave's reflection and inversion.

To learn more about standing waves, click:

https://brainly.com/question/14176146

#SPJ1

a) Using the lens equation, 1/f = 1/do + 1/di, where f is the focal length, do is the distance to the object, and di is the distance to the image, we can calculate the distance to the object: 1/3 = 1/do + 1/5

Solving for do, we get:

do = 15/8 cm

Therefore, the distance to the object is 15/8 cm.

b) The magnification of the image can be calculated using the formula, m = -di/do, where m is the magnification. Substituting the given values, we get:

m = -di/do = -(3 cm)/(15/8 cm) = -0.5

Therefore, the magnification of the image is -0.5, which means the image is smaller than the object and inverted.

c) To show the location of the image relative to the lens using a ray diagram, we can draw two rays from the top of the object. One ray is drawn parallel to the principal axis and refracts through the focal point on the opposite side of the lens. The other ray passes through the optical center of the lens and refracts without changing direction. The point where these two rays intersect is the location of the image.

In this case, the object is located between the focal point and the lens, so the image is real and inverted. The image is also located on the same side of the lens as the object, which means it is a virtual image. The image is smaller than the object, as determined by the negative magnification value. Therefore, the image is located 3 cm to the right of the lens, inverted, virtual, and smaller than the object.

Learn more about  focal length : brainly.com/question/31755962

#SPJ11

The torque is the measure of the effectiveness of a force in causing rotational motion. It is calculated by multiplying the magnitude of the force applied by the perpendicular distance from the axis of rotation to the line of action of the force, known as the moment arm.

In this case, a person pushes on a door with a force of 25 N, and the moment arm is given as 0.5 meters. To calculate the magnitude of the torque, we use the equation:

Torque = Force × Moment Arm.

Substituting the given values into the equation, we have:

Torque = 25 N × 0.5 m.

Calculating this expression gives us the magnitude of the torque.

Torque = 12.5 N·m.

Therefore, the magnitude of the torque exerted on the door is 12.5 N·m. This means that the person's force of 25 N, applied at a perpendicular distance of 0.5 meters from the axis of rotation, creates a rotational effect equivalent to a torque of 12.5 N·m on the door.

To know more about torque click this link-

https://brainly.com/question/30338175

#SPJ11

The angle that the laser beam can make with the vertical is 41.805°.

When a light beam travelling through a medium with a higher refractive index approaches a second medium at an angle of incidence larger than the critical angle, a total internal reflection occurs at the border between the two transparent media.

Total internal reflection occurs at an angle of 90 degrees above the threshold final angle.

Now considering the boundary between the air and the plastic,  

Applying Snell's law,

n(plastic) sinθ' = n(air) sinθ

sinθ' = n(air) sinθ/n(plastic)

sinθ' = (1/1.5) x sin90

sinθ' = 2/3

Therefore, the angle that the laser beam can make with the vertical,

θ' = sin⁻¹(2/3)

θ' = 41.805°

To learn more about Total internal reflection, click:

https://brainly.com/question/13088998

#SPJ1

True. The direction of the magnetic field at a given location is determined by the direction that the north pole of a compass points when placed at that location.

A compass needle aligns itself with the Earth's magnetic field, with the north pole of the compass needle pointing towards the Earth's magnetic north pole. This property of the compass can be attributed to the interaction between the Earth's magnetic field and the magnetized needle within the compass.

The Earth itself acts as a giant magnet, with its magnetic field generated by the movement of molten iron in its outer core. The Earth's magnetic field extends from its interior and surrounds the planet.

When a compass is placed at a particular location, the magnetized needle aligns itself with the Earth's magnetic field lines. The north pole of the compass needle points towards the magnetic north pole of the Earth, which is close to the geographic south pole. This allows us to determine the direction of the magnetic field at that location.

Therefore, it is true that the direction of the magnetic field at a given location is indicated by the direction that the north pole of a compass points when placed at that location.

To know more about magnetic field, please click on:

https://brainly.com/question/30331791

#SPJ11

We expect the cosmic background radiation (CBR) to be almost, but not quite, the same in all directions due to two primary reasons: the initial conditions of the universe and the Doppler effect.

1. Initial Conditions of the Universe: The CBR is the remnant radiation from the early universe, specifically from the period known as recombination, when atoms formed from the primordial plasma. The universe was initially highly homogeneous and isotropic, meaning it had similar properties in all directions. This leads to the CBR being almost the same in all directions.

2. Doppler Effect: Despite the initial uniformity, there are small fluctuations in the CBR due to the motion of the Earth relative to the cosmic microwave background. This motion causes a Doppler effect, which results in a slight anisotropy in the observed CBR. The Doppler effect makes the CBR appear slightly hotter (blueshifted) in the direction of our motion and slightly cooler (redshifted) in the opposite direction.

So, the cosmic background radiation is expected to be almost the same in all directions because of the homogeneous and isotropic nature of the early universe, but not quite the same due to the Doppler effect caused by the Earth's motion relative to the cosmic microwave background.

To learn more about Doppler effect - brainly.com/question/15318474

#SPJ11

The net force pushing out on the window can be calculated using the formula:F = P * A. The net force pushing against the window is roughly 37,995 N, which is equivalent to 3.87 tonnes of force.

               First, we need to convert the pressures from atmospheres to Pascals:

Outside pressure = 0.96 atm = 96,000 Pa

Inside pressure = 1.0 atm = 101,325 Pa

The pressure difference is:

ΔP = P(outside) - P(inside)

ΔP = 96,000 - 101,325

ΔP = -5,325 Pa

Note that the pressure difference is negative, indicating that the net force will be pushing out on the window.

The area of the window is:

A = 3.4 * 2.1

A = 7.14 m^2

Now we can calculate the net force:

F = ΔP * A

F = -5,325 * 7.14

F = -37,994.5 N

The net force pushing out on the window is approximately 37,995 N, which is equivalent to approximately 3.87 tons of force.

To learn more about force:

https://brainly.com/question/13191643

#SPJ11

The point where the electric field magnitude is e/4 is located 4 meters away from the isolated point charge.

The electric field due to a point charge decreases inversely with the square of the distance from the charge. Therefore, if the field magnitude is e at a distance of 2 meters, it will be (1/4)e at a distance of 4 meters. This is because the electric field strength is proportional to the inverse square of the distance from the point charge, so the field strength decreases rapidly with increasing distance.

In summary, the point where the electric field magnitude is e/4 is located 4 meters away from the isolated point charge due to the inverse square relationship between the electric field and distance from the charge.

Learn more about magnitude here:

brainly.com/question/14123452

#SPJ11

The diameter of the sphere made from 4.0 mol of gold is 6.0 cm.

The first step to solving this problem is to find the mass of the gold sphere. The molar mass of gold is 196.97 g/mol, so 4.0 mol of gold has a mass of 787.88 g. The next step is to use the formula for the volume of a sphere, V = (4/3)πr^3, and solve for the radius, r. The density of gold is 19.3 g/cm^3, so the mass of the sphere can be used to find its volume, V = m/d = 787.88 g / 19.3 g/cm^3 = 40.8 cm^3. Solving for r, we get r = (3V/4π)^(1/3) = (3(40.8 cm^3)/(4π))^(1/3) = 1.71 cm. Finally, the diameter is just twice the radius, so the diameter is 2 * 1.71 cm = 3.4 cm rounded to two significant figures.

To learn more about sphere:

https://brainly.com/question/11374994

#SPJ11

Quasars are extremely bright and distant celestial objects that emit a large amount of energy, including radiation, X-rays, and radio waves. Their brightness is believed to come from the accretion of gas and dust onto a supermassive black hole at the center of a distant galaxy.

This accretion process generates a tremendous amount of energy that is emitted as radiation, making quasars visible from vast distances.

There is strong evidence to support the theory that quasars are the centers of distant galaxies. Firstly, observations have shown that quasars are often surrounded by a large amount of gas and dust, which is believed to be the material being pulled into the supermassive black hole at the center of the galaxy. Secondly, studies of the motion of stars within galaxies have shown that the centers of galaxies are often associated with massive objects, such as supermassive black holes, which are believed to be the engines powering quasars. Additionally, the distribution of galaxies and quasars in the universe suggests a close relationship between the two, with quasars found mainly in the centers of galaxies.

To Learn more about Quasars. Click this!

brainly.com/question/29982221

#SPJ11

The volume occupied by 0.255 mol of helium gas at 1.25 atm and 305 K is approximately 5.11 liters.

To find the volume occupied by 0.255 mol of helium gas at 1.25 atm and 305 K, we can use the Ideal Gas Law equation:
[tex]PV = nRT[/tex]
where P is pressure, V is volume, n is the number of moles, R is the gas constant (0.0821 L atm / K mol), and T is temperature.

the area that one mole of any (ideal) gas takes up at normal pressure and temperature
We have:
P = 1.25 atm
n = 0.255 mol
R = 0.0821 L atm / K mol
T = 305 K
Rearranging the equation for volume, V:
[tex]V = nRT / P[/tex]
Substitute the given values:
V = (0.255 mol)(0.0821 L atm / K mol)(305 K) / (1.25 atm)
Calculate the result:
V ≈ 5.11 L

Learn more about pressure  here

https://brainly.com/question/29493123

#SPJ11

Wrapping a second wire around a guitar string to increase its mass while maintaining the same tension will decrease the frequency of the fundamental standing wave formed on the string.

This is because the frequency of a vibrating string is inversely proportional to its length and directly proportional to the square root of its tension and mass per unit length.

Adding a second wire increases the mass per unit length of the string, thus decreasing its frequency. The wavelength of the fundamental standing wave will also increase since the speed of the wave is proportional to the square root of tension and inversely proportional to the square root of mass per unit length.

Overall, the fundamental frequency of the guitar string will be lowered, resulting in a lower pitch when played. The change in mass may also affect the timbre and tone of the string, potentially making it sound thicker or duller.

To learn more about string click on,

https://brainly.com/question/15414260

#SPJ4

The entropy change when 275 g of water is heated from 20.0°C to 80.0 °C is 236 J/K.

The formula for calculating the change in entropy is ΔS = Q/T, where Q is the heat added to the system and T is the temperature in Kelvin. In this case, we can use the specific heat capacity of water to calculate the heat added to the system.

First, we need to calculate the change in temperature:

ΔT = 80.0°C - 20.0°C = 60.0°C

Next, we can calculate the heat added to the system:

Q = mcΔT, where m is the mass of water and c is the specific heat capacity of water.

m = 275 g = 0.275 kg (converting from grams to kilograms)

c = 4.18 J/g°C (specific heat capacity of water)

Q = (0.275 kg)(4.18 J/g°C)(60.0°C) = 693.09 J

Finally, we can calculate the entropy change:

ΔS = Q/T

T = 20.0°C + 273.15 = 293.15 K (converting from Celsius to Kelvin)

ΔS = 693.09 J / 293.15 K = 2.36 J/K

Therefore, the entropy change is 236 J/K.

To learn more about Entropy click here

https://brainly.com/question/2899530

#SPJ11

When a capacitor of capacitance c_a is charged to a voltage v_0, it stores an amount of electric charge that is proportional to the product of its capacitance and volume.

Capacitance is the measure of a capacitor's ability to store electric charge, and it is directly proportional to the amount of charge that the capacitor can store. Therefore, when the capacitor is charged to a voltage v_0, it stores an amount of electric charge that is proportional to its capacitance c_a and the voltage v_0.

The amount of charge stored on a capacitor can be calculated using the formula Q = C * V, where Q is the charge stored on the capacitor, C is the capacitance of the capacitor, and V is the voltage across the capacitor. Therefore, when a capacitor of capacitance c_a is charged to a voltage v_0, the charge stored on the capacitor is given by Q = c_a * v_0.
To Know more about voltage visit;
https://brainly.com/question/13521443
#SPJ11

The potential difference between two points separated by a distance of 2 m along the x-axis is 10 V. The potential difference between two points separated by a distance of 3 m along the y-axis is 0 V. Yes, my answer is consistent with the answer to questions 2 and 3.

The potential difference between two points in an electric field is given by the product of the electric field strength and the distance between the two points. Therefore, the potential difference between two points separated by a distance of 2 m along the x-axis is 5 V/m * 2 m = 10 V. Similarly, the potential difference between two points separated by a distance of 3 m along the y-axis is 5 V/m * 0 m = 0 V, because the electric field is perpendicular to the y-axis and does not contribute to the potential difference. This is consistent with the fact that the electric field is uniform and only has a component in the x-direction.

To learn more about potential difference:

https://brainly.com/question/12198573

#SPJ11

The capacitance of the capacitor is 1.38 microfarads (μF) (rounded to two significant figures).

The capacitance of a capacitor whose reactance is 111 Ω at a frequency of 84.0 Hz can be calculated using the formula:
Capacitive reactance (Xc) = 1 / (2πfC)
Where f is the frequency in Hertz, C is the capacitance in Farads, and π is approximately equal to 3.14.
Rearranging the formula, we get:
C = 1 / (2πfXc)
Substituting the given values, we get:
C = 1 / (2π x 84.0 Hz x 111 Ω)
C = 1.38 x 10^-6 Farads

To learn more about capacitance, click here:
https://brainly.com/question/17176550

#SPJ11

The more massive a white dwarf, the smaller its radius.

A white dwarf is a remnant of a low to intermediate-mass star which has exhausted its nuclear fuel and undergone gravitational collapse. As a result of this collapse, the white dwarf's core becomes degenerate and is supported by electron degeneracy pressure.

This is because of the nature of electron degeneracy pressure. As a white dwarf's mass increases, its electrons become more tightly packed, and its velocity increases. As a result, the pressure they exert on each other also increases, pushing the outer layers of the white dwarf inward, causing the star's radius to decrease.

In conclusion, the more massive a white dwarf, the smaller its radius. This is due to the nature of electron degeneracy pressure, which becomes stronger as they become more tightly packed. A more massive white dwarf will eventually undergo further collapse and evolve into a neutron star or black hole.

To know more about white dwarf, visit:

https://brainly.in/question/50062726

#SPJ11

To determine the initial speed with which the ball was thrown, we can analyze the horizontal and vertical components of its motion separately.

Since the ball is thrown horizontally from the top of the hill, its initial vertical velocity is 0 m/s. We can use the equation of motion for vertical motion:

Δy = V₀y * t + (1/2) * g * t²

In this case, Δy represents the vertical displacement (which is the height of the hill, 20 m), V₀y represents the initial vertical velocity (0 m/s), g represents the acceleration due to gravity (approximately 9.8 m/s²), and t represents the time of flight.

Substituting the known values:

20 = 0 * t + (1/2) * 9.8 * t²

20 = 4.9 * t²

t² = 20 / 4.9

t ≈ 2.04 s

Since the time of flight for the ball is 2.04 seconds, we can now determine the initial horizontal velocity using the equation:

V₀x = Δx / t

In this case, Δx represents the horizontal displacement, which is equal to the distance traveled horizontally when the ball strikes the ground (which we don't have in the given information).

Therefore, without the horizontal displacement or any additional information, we cannot determine the exact initial speed with which the ball was thrown.

Learn more about Displacement and Speed here:

https://brainly.com/question/16738360

#SPJ11

True. Mapping the Milky Way galaxy in optical wavelength is indeed challenging due to the presence of dust in the disk. This dust absorbs and scatters the optical light, making it difficult for astronomers to observe and map the galaxy.

The Milky Way is a spiral galaxy that consists of a central bulge, a thin disk, and a halo. The disk is where most of the galaxy's stars and gas are located, and it is also where the dust is most abundant. The dust is made up of tiny particles that scatter and absorb light, creating a haze that obstructs our view of the galaxy.

To overcome this challenge, astronomers use infrared and radio wavelengths to map the Milky Way. Infrared light can penetrate the dust and reveal the structures and features of the galaxy that are hidden from optical observations. Radio waves are also able to pass through the dust and reveal the distribution of gas in the Milky Way.

In conclusion, mapping the Milky Way galaxy in optical wavelength is difficult because of the presence of dust in the disk. However, astronomers have developed techniques to overcome this challenge by using alternative wavelengths such as infrared and radio waves to map the galaxy.

To know more about Milky Way galaxy click this link-

https://brainly.com/question/30714548

#SPJ11

1.8cm will be the location of the image relative to the lens. Image will be real, upright, and smaller  than the object

Define lens

A lens is a transmissive optical tool that employs refraction to focus or disperse a light beam. A compound lens is made up of numerous simple lenses that are often aligned along a common axis, as opposed to a simple lens, which is made up of a single transparent piece.

A concave lens is one that bends a straight light beam away from the source and focuses it into a distorted, upright virtual image. Both actual and virtual images can be created using it. At least one internal surface of concave lenses is curved.

u ⇒ 4.5cm

f ⇒ 3cm

v ⇒?

1/v ⇒ 1/f + 1/u

1/v ⇒ 1/3 +1/4.5

v ⇒3*4.5(3+4.5)

v ⇒1.8cm

To learn more about concave lens  use:

https://brainly.com/question/2289939

#SPJ4

To determine the required rate at which the magnetic field (B) must increase to induce a current of 2.0 A in the coil, we can use Faraday's law of electromagnetic induction, which states:

ε = -N * dΦ/dt

where ε represents the induced electromotive force (emf), N is the number of turns in the coil, and dΦ/dt is the rate of change of magnetic flux.

The magnetic flux (Φ) through the coil can be calculated as:

Φ = B * A

where B is the magnetic field and A is the area of the coil.

Given:

N = 100 turns

Diameter of the coil (d) = 8.0 cm = 0.08 m

Radius of the coil (r) = 0.04 m (half of the diameter)

Wire diameter (d_wire) = 0.50 mm = 0.00050 m

Current (I) = 2.0 A

The area of the coil can be calculated as:

A = π * r²

The area of the wire can be calculated as:

A_wire = π * (d_wire/2)²

The effective area for magnetic flux can be calculated as:

A_eff = A - A_wire

Substituting the given values into the equations, we can find A_eff and then calculate the required rate of change of magnetic field (dB/dt):

A = π * (0.04)^2

A_wire = π * (0.00050/2)^2

A_eff = A - A_wire

Using the calculated effective area, we can find dB/dt:

ε = -N * dΦ/dt

ε = -N * (dB/dt) * A_eff

Rearranging the equation to solve for dB/dt:

dB/dt = -(ε / (N * A_eff))

Substituting the known values:

N = 100 turns

A_eff = Calculated value

ε = I (current) = 2.0 A

By plugging in the values and performing the calculation, you will obtain the required rate at which the magnetic field must increase to induce a current of 2.0 A in the coil.

Learn more about Coil here:

https://brainly.com/question/15237530

#SPJ11

Rub the glass rod with silk to make it positively charged and the silk negatively charged. Bring one metal sphere near the silk and the other near the glass rod to transfer charges and obtain two spheres with equal but opposite charges.

One method of giving the spheres exactly equal but opposite charges using the given materials is:

1. Rub the glass rod with the silk to transfer some electrons from the glass to the silk. The glass will become positively charged and the silk will become negatively charged.

2. Bring one of the metal spheres close to the charged silk. Electrons from the negative charge on the silk will repel the electrons in the metal sphere, causing some electrons to move away from the sphere and towards the stand. This leaves the sphere with a positive charge.

3. Bring the other metal sphere close to the charged glass rod. Electrons from the positive charge on the glass will be attracted to the metal sphere, causing some electrons to move from the stand to the sphere. This leaves the sphere with a negative charge.

4. Check the charges on the spheres using an electroscope or a pith ball. If the charges are not exactly equal and opposite, repeat steps 2 and 3 until the desired charges are obtained.

By following this method, the two metal spheres will be given exactly equal but opposite charges, with one sphere having a positive charge and the other sphere having a negative charge.

Visit to know more about Positively charged:-

brainly.com/question/23532831

#SPJ11

(a) The torque on the circular loop can be found using the formula τ = NABi, where N is the number of turns in the loop, A is the area of the loop, and B is the magnetic field strength. Since the loop is circular, its area can be expressed as A = πr², where r is the radius of the loop. We can also express the total length of the wire as L = 2πr, which means that r = L/(2π). Substituting these values into the formula for torque, we get τ = (π/2)BLi.

(b) If the same length of wire is used to form a square loop, its side length would be L/4. The area of the square loop would be A = (L/4)² = L²/16. Using the same formula for torque, we get τ = (BLi)L²/16. Comparing the two torques, we can see that the torque on the square loop is larger, since it has a larger area than the circular loop.
To find the torque on the circular loop carrying a current i with a total wire length L in a uniform magnetic field B parallel to the plane of the loop, we can use the formula τ = μ × B, where μ is the magnetic moment.

For a circular loop, the magnetic moment is given by μ = iA, where A is the area of the loop. Since A = πr^2 and L = 2πr, we can solve for r: r = L/(2π). The torque on the circular loop is then τ_c = iBπ(L/(2π))^2.
For the square loop with the same wire length, the side length is L/4. The area of the square loop is (L/4)^2. The magnetic moment μ_s = i(L/4)^2, and the torque τ_s = iB(L/4)^2.
Comparing the two torques, τ_c = iBπ(L/(2π))^2 and τ_s = iB(L/4)^2, the torque on the circular loop is larger due to the π factor in the formula.

To know more about Magnetic visit-

https://brainly.com/question/2841288

#SPJ11

The part functionality that does not depend on surface attributes is thermal conductivity. Thermal conductivity refers to a material's ability to conduct heat, and it is an intrinsic property of the material that does not depend on the surface of the material.

Friction and wear, corrosion resistance, and fatigue life are all surface attributes that affect the part functionality. Friction and wear are affected by the surface roughness, hardness, and lubrication of the material. Corrosion resistance is affected by the surface composition, passivation, and coating of the material. Fatigue life is affected by the surface finish, residual stresses, and microstructure of the material.

In contrast, thermal conductivity depends on the molecular structure and bonding of the material, which are intrinsic properties that do not change with the surface of the material. Therefore, thermal conductivity is not influenced by the surface attributes of a part, and it remains constant for a given material regardless of its surface conditions.

To know more about Thermal conductivity click this link -

brainly.com/question/7643131

#SPJ11

A 10.0-cm-tall object is 12 cm in front of a diverging lens that has an-8-em focal length. The image distance is 1.55 cm, option C is Correct.

We can use the thin lens equation:
[tex]\frac{1}{f} =\frac{1}{do} -\frac{1}{di}[/tex]
where f is the focal length, do is the object distance, and di is the image distance.
First, we need to convert the height of the object to meters:

A converging lens is an optical device that causes all light rays passing through it to converge. The primary purpose of a convergent lens is to focus and converge the incoming light rays from an object to produce a picture. The size of an object's picture will depend on how near it is to the lens; it might also remain the same.
10.0 cm = 0.1 m
Then, we can plug in the given values:
1/-8 = 1/0.12 - 1/di
Solving for di:
di = -1.55 cm
Since the image distance is negative, this means that the image is virtual (i.e. on the same side of the lens as the object).
Therefore, the answer is C) -1.55 cm.

Learn more about converging lens here

https://brainly.com/question/29994652

#SPJ11

The width of the central maximum on the screen is approximately [tex]4.219 * 10^{-6} m[/tex], or 4.219 µm.

To determine the width of the central maximum of the diffraction pattern produced by helium-neon laser light (λ = 632.8 nm) passing through a single slit of width 0.30 mm, you can use the formula for the angular width of the central maximum in a single-slit diffraction experiment:
θ = (2 * λ) / slit width
First, convert the given measurements to meters: λ = 632.8 nm = [tex]632.8 * 10^{-9} m[/tex], and slit width = 0.30 mm = [tex]0.30 * 10^{-3} m[/tex]. Next, calculate the angular width:
θ = [tex](2 * 632.8 * 10^{-9} m) / (0.30 * 10^{-3} m) = 4.219 * 10^{-6}[/tex] radians
Now, to find the width of the central maximum on a screen 1.0 m behind the slit, use the formula:
Width = distance to screen * θ
Width = [tex]1.0 m * 4.219 * 10^{-6} radians[/tex] ≈ [tex]4.219 * 10^{-6} m[/tex]

To learn more about diffraction click here https://brainly.com/question/12290582

#SPJ11

The time period will remain the same when it is taken to the surface of moon. So, option D.

The frequency becomes twice the original frequency, when mass on the spring is quadrupled.

a) The expression for the time period of the spring-block simple harmonic oscillator is given by,

T = 2π√(m/k)

So, from the equation, it is clear that the time period of the spring-block system does not depend on the acceleration due to gravity.

Therefore, the time period will remain the same when it is taken to the surface of moon.

So, the time period of spring-block system on moon = T

b) The expression for the frequency of the spring-block system is given by,

f = (1/2π)√(m/k)

When the mass of the spring is quadrupled, the frequency of the spring-block system,

f' = (1/2π)√(4m/k)

f' = 2 x (1/2π)√(m/k)

f' = 2f

So, the frequency becomes twice the original frequency.

To learn more about time period, click:

https://brainly.com/question/29251256

#SPJ1