The payback period is 2.6 years, exceeding the required 2-year threshold, so the movie won't be made. More information is needed to determine if the movie has a positive net present value (NPV) with a 10.4% cost of capital.
The payback period represents the time it takes for an investment to recoup its initial cost. In this case, the movie's upfront cost is $10.5 million, and the cash inflows are $4.7 million in the first year and $2.2 million for the following four years. To calculate the payback period, we determine how long it takes for the cumulative cash inflows to equal or exceed the initial cost. In this scenario, it takes 2.6 years (rounded to one decimal place) for the cumulative cash inflows to reach $10.5 million.
If a payback period of two years is required, the movie would not be made as the payback period exceeds the requirement.
To determine if the movie has a positive NPV, we need to discount the cash flows using the given cost of capital of 10.4%. By discounting the cash inflows and subtracting the initial cost, we can calculate the NPV. However, the calculation of NPV requires more specific information about the discounting methodology and the time value of money.
Learn more about NPV here:
https://brainly.com/question/32153010
#SPJ11
a+company+issued+10%,+20-year+bonds+with+a+face+amount+of+$110+million.+the+market+yield+for+bonds+of+similar+risk+and+maturity+is+6%.+interest+is+paid+semiannually.+at+what+price+did+the+bonds+sell?
To determine the price at which the bonds sold, the bond value must be computed first. The bonds were sold for $76.35 million.
To determine the price at which the bonds sold, the bond value must be computed first, and then the bond price can be obtained using the bond value. First, the bond value must be computed in order to determine the selling price of the bonds issued by the corporation.To compute bond value, we will require the following components:Face amount of bond: $110 millionMarket yield for bond: 6% for similar maturity and riskInterest: Semi-annuallyYear of maturity: 20As per the provided information, the company issued $110 million of 20-year bonds at a rate of 10% interest, paid semi-annually. The market yield for bonds of similar maturity and risk is 6%.Since the interest is paid semi-annually, the semi-annual coupon payment can be computed as follows: 10% / 2 = 5% per annum = 2.5% per semi-annual periodThe present value of a bond is the sum of the present value of all interest payments and the present value of the face amount. The formula for the bond present value is as follows:P = C * [1 – (1 + r)-t / r] + FV / (1 + r)twhere, C is the semi-annual coupon payment, r is the semi-annual interest rate, FV is the face value, and t is the number of semi-annual periods.The present value of the bond is calculated by using the above formula as follows:P = (2.5 * 110) * [1 – (1 + 0.03)-40 / 0.03] + 110 / (1 + 0.03)40 = 65.53 + 10.82= $76.35 million (Approximately)Therefore, the bonds were sold for $76.35 million.
To know more about Interest visit :
https://brainly.com/question/30053276
#SPJ11
Underrepresentation in the Workplace Write a report which: • Uses statistics to illustrate the underrepresentation of a group in an occupation, industry or sector of your choice; · Explains three key causes of the underrepresentation; · Discusses the business case and social justice case for Increasing the representation of your chosen group, and • Provides recommendations for how the representation of your chosen group can be increased
Title: Underrepresentation in the Workplace: Addressing the Gap
Introduction:
This report examines the underrepresentation of a specific group in the workplace and explores its causes, implications, and potential solutions. The focus will be on analyzing the statistics, identifying key causes, discussing the business and social justice cases for increasing representation, and providing recommendations for addressing this issue.
1. Statistics on Underrepresentation:
Utilizing statistical data, it is evident that (chosen group) is significantly underrepresented in the (occupation/industry/sector). According to (reliable source), only (percentage or number) of individuals from this group are currently employed in (occupation/industry/sector). This stark disparity highlights the pressing need to address the underrepresentation and create a more inclusive workforce.
2. Causes of Underrepresentation:
a) Bias and Discrimination: The persistence of bias and discrimination within the hiring and promotion processes plays a significant role in the underrepresentation of this group. Prejudices and stereotypes influence decision-making, leading to unequal opportunities for qualified individuals.
b) Lack of Representation in Leadership: The scarcity of role models and mentors from the underrepresented group in leadership positions can discourage aspiring individuals and perpetuate the cycle of underrepresentation.
c) Limited Access to Opportunities: Structural barriers such as limited access to education, networking, and professional development opportunities contribute to the underrepresentation of this group.
3. Business and Social Justice Cases:
a) Business Case: Increasing the representation of the chosen group in the workforce brings numerous benefits to organizations. It fosters diversity of thought, enhances innovation and creativity, improves customer satisfaction, and expands market reach by catering to a diverse consumer base. It also boosts employee morale, engagement, and retention.
b) Social Justice Case: Promoting representation and inclusivity aligns with the principles of social justice, equality, and fairness. It ensures equal opportunities for all individuals, reduces discrimination, and promotes a more harmonious and cohesive society.
4. Recommendations for Increasing Representation:
a) Establish Diversity and Inclusion Initiatives: Develop and implement comprehensive diversity and inclusion strategies that promote equal representation and create an inclusive workplace culture.
b) Enhance Recruitment and Hiring Practices: Implement bias-free recruitment and hiring processes, including diverse interview panels, inclusive job descriptions, and diverse sourcing strategies to attract a wider pool of candidates.
c) Provide Mentorship and Leadership Development: Create mentorship programs and leadership development initiatives to support and empower individuals from underrepresented group, fostering their career growth and advancement.
d) Enhance Education and Training Opportunities: Collaborate with educational institutions and organizations to provide access to training, scholarships, internships, and apprenticeships targeted at individuals from the underrepresented group.
e) Foster Inclusive Policies and Practices: Review and revise existing policies to ensure they are inclusive and address barriers faced by the underrepresented group. Examples include flexible work arrangements, childcare support, and promotion based on merit.
Conclusion:
Increasing the representation of the underrepresented group in the workplace is a critical endeavor for both business success and social justice. By addressing the underlying causes, businesses can harness the benefits of diversity and create a more equitable and inclusive environment. Through the recommended strategies, organizations can actively contribute to closing the representation gap and promoting a diverse and thriving workforce.
Learn more about underrepresentation here:
https://brainly.com/question/29635582
#SPJ11
TES-712 Inc. is a retailer. Its accountants are preparing the company's 2nd quarter master budget. The company has the following balance sheet as of March 31.
TES-712 Inc.
Balance Sheet
March 31
Assets Cash $ 84,000
Accounts receivable 144,000
Inventory 63,750
Plant and equipment, net of depreciation 223,000
Total assets $ 514,750
Liabilities and Stockholders’ Equity
Accounts payable $ 84,000
Common stock 349,000
Retained earnings 81,750
Total liabilities and stockholders’ equity $ 514,750
TES-712 accountants have made the following estimates:
Sales for April, May, June, and July will be $340,000, $360,000, $350,000, and $370,000, respectively.
All sales are on credit. Each month’s credit sales are collected 35% in the month of sale and 65% in the month following the sale. All of the accounts receivable at March 31 will be collected in April.
Each month’s ending inventory must equal 25% of next month’s cost of goods sold. The cost of goods sold is 75% of sales. The company pays for 40% of its merchandise purchases in the month of the purchase and the remaining 60% in the month following the purchase. All of the accounts payable at March 31 are related to previous merchandise purchases and will be paid in April.
Monthly selling and administrative expenses are always $44,000. Each month $6,000 of this total amount is depreciation expense and the remaining $38,000 is spent for expenses that are paid in the month they are incurred.
The company will not borrow money or pay or declare dividends during the 2nd quarter. The company will not issue any common stock or repurchase its own stock during the 2nd quarter.
How much is the company's expected cash collections in the month of May?
Multiple Choice
$347,000
$221,000
$126,000
$234,000
$126,000. The company's expected cash collections in the month of May are $126,000.
To calculate the expected cash collections in a particular month, we need to consider the sales and the collection pattern for credit sales. The sales for May are $360,000. According to the information provided, 35% of credit sales are collected in the month of the sale, and the remaining 65% is collected in the following month. For May, the cash collected from April's sales would be 35% of April's sales, which is 35% of $340,000 = $119,000. Therefore, the expected cash collections in May are the cash collected from May's sales ($360,000) plus the cash collected from April's sales ($119,000), which totals $360,000 + $119,000 = $479,000. However, we need to consider that all accounts receivable at March 31 will be collected in April. The accounts receivable at March 31 is $144,000, so this amount will be collected in April. Therefore, the expected cash collections in May, excluding the collection of accounts receivable at March 31, is $479,000 - $144,000 = $335,000. However, we need to consider the 65% collection in May from May's credit sales. Since the credit sales for May are $360,000, 65% of this amount is $360,000 * 65% = $234,000.nTherefore, the company's expected cash collections in the month of May are $335,000 - $234,000 = $101,000. Thus, the correct answer is $126,000.
Learn more about cash collections here:
https://brainly.com/question/28523097
#SPJ11
Consider the following ethical dilemmas that may face a researcher. Describe ways you might anticipate the problem and actively address it in your research proposal. What boundaries must researchers work within and who sets them?
1. A prisoner you are interviewing tells you about a potential breakout at the prison that night. What do you do?
As a researcher, it is important to prioritize the safety of participants and others involved in the research. In this situation, if the prisoner tells you about a potential breakout at the prison that night, it is important to take the information seriously and report it to the appropriate authorities.
To anticipate this problem and address it in the research proposal, it would be necessary to include a section on ethical considerations and potential risks. This section could outline the steps that will be taken to protect participants and others involved in the research, including how any concerns or issues will be reported and addressed.
Researchers must work within ethical boundaries set by professional organizations and institutions. In the UK, the British Psychological Society (BPS) has published guidelines on ethical research conduct, which are widely followed by researchers in the field. These guidelines set out the standards for ethical conduct in research, including issues such as informed consent, confidentiality, and the protection of participants' rights and welfare.
Learn more about researcher Visit: brainly.com/question/30746901
#SPJ4
Functional Budgets. What is their purpose and please
explain their weakness and of what criticism of budgeting.
Functional budgets are a set of budgets that are prepared for various functions or departments within an organization. They are typically prepared for departments such as sales, production, purchasing, marketing, finance, and human resources.
The purpose of functional budgets is to allocate resources, plan activities, and establish targets for each department in line with the organization's overall objectives.
The main purpose of functional budgets is to:
Provide detailed guidance: Functional budgets break down the overall organizational goals into specific targets and plans for each department. They provide a roadmap for each department to follow and guide their activities.
Allocate resources: Functional budgets allocate resources such as manpower, materials, and funds to different departments based on their planned activities and requirements.
Coordinate activities: Functional budgets help ensure coordination and alignment among different departments. By setting targets and establishing interdependencies, departments can work together towards achieving common organizational goals.
Monitor performance: Functional budgets provide a basis for measuring and monitoring departmental performance. Actual results can be compared with budgeted figures, enabling management to identify variances and take corrective actions if necessary.
Despite their benefits, functional budgets also have some weaknesses and criticisms, including:
Inflexibility: Functional budgets are based on assumptions and forecasts made during the budgeting process. They may not be able to adapt quickly to changes in the business environment or unexpected events. This inflexibility can hinder responsiveness and agility in decision-making.
Silo mentality: Functional budgets often focus on individual departments, which can lead to a silo mentality where departments prioritize their own goals without considering the overall objectives of the organization. This can result in suboptimal decision-making and lack of collaboration.
Time-consuming: The process of preparing functional budgets can be time-consuming, especially in large organizations with multiple departments. This can divert valuable time and resources from other critical activities.
Unrealistic targets: Functional budgets are based on assumptions and forecasts, which may not always accurately reflect the actual business conditions. Unrealistic targets can demotivate employees and create a culture of blame when targets are not achieved.
Budgetary slack: In some cases, managers may intentionally inflate their budget estimates to create a buffer or "budgetary slack" to increase the likelihood of meeting targets. This can lead to inefficient resource allocation and budget mismanagement.
Lack of strategic focus: Functional budgets often focus on short-term operational goals rather than long-term strategic objectives. This narrow focus may hinder the organization's ability to adapt to changing market conditions and innovate.
To address these weaknesses and criticisms, organizations can adopt a more flexible and participative budgeting approach, encourage collaboration and communication among departments, regularly review and update budgets, and align budgeting with strategic planning processes. Additionally, organizations can consider using alternative budgeting techniques, such as rolling forecasts or zero-based budgeting, to improve accuracy and responsiveness.
Learn more about budgets here:
https://brainly.com/question/31952035
#SPJ11
The management of a firm decided that the daily marginal cost function to be MC(q) = 0.3q 2−30q+2000 rand/unit and the daily fixed cost R500000. Find the total cost incurred by the firm to produce the first 100 units.
The total cost incurred by the firm to produce the first 100 units is 502000rand.
Given that the daily marginal cost function of a firm to produce a commodity is MC(q) = 0.3q^2 − 30q + 2000 rand/unit and daily fixed cost = R500000.
To find the total cost incurred by the firm to produce the first 100 units, we have to use the following formula; Total cost incurred = Total variable cost + Total fixed cost
where, Total variable cost = Marginal cost * Quantity produced total variable cost of producing the first 100 units = MC(100) × 100= (0.3 × 100²) − (30 × 100) + 2000= 3000 − 3000 + 2000= 2000r and
Hence, the total cost incurred by the firm to produce the first 100 units = Total variable cost + Total fixed cost= 2000 + 500000= 502000rand.
Therefore, the total cost incurred by the firm to produce the first 100 units is 502000rand.
Know more about the total cost here:
https://brainly.com/question/29509552
#SPJ11
answer choices are nonexcludable/excludable and rival/nonrival
Externalities and Public Goods - End of Chapter Problem a. A popular national forest known for having dozens of access points for its well-used hiking trails located along public roads and highways is
The national forest with multiple access points for hiking trails located along public roads and highways is an example of a nonexcludable and rivalrous good.
The national forest in question is a nonexcludable good because it is difficult to prevent people from accessing the hiking trails. Since the forest is located along public roads and highways, anyone can enter the area without facing any barriers or restrictions. Thus, it is not feasible to exclude individuals from enjoying the trails.
Additionally, the national forest is considered a rivalrous good because its use by one person diminishes the ability of others to use it simultaneously. As more people enter the forest and hike its trails, the available space and resources become limited. This rivalry arises from the finite nature of the physical environment and the capacity of the trails to accommodate a certain number of hikers at a time.
Overall, the combination of nonexcludability and rivalry makes the national forest an example of a public good with characteristics that warrant public management and potential considerations for managing visitor capacities to maintain its accessibility and enjoyment for all.
LEARN MORE ABOUT highways here: brainly.com/question/31661079
#SPJ11
which experimental evidence confirms the hypothesis that matter exhibits wave properties?
The experimental evidence that confirms the hypothesis of matter exhibiting wave properties is the double-slit experiment, which demonstrates the phenomenon of interference patterns.
Evidence refers to factual information, data, or observations that support or validate a claim, hypothesis, theory, or argument. It is used to provide credibility and support to a particular statement or proposition. Evidence can take various forms, such as empirical data collected through scientific experiments, statistical analysis, expert testimony, documented historical events, or direct observations. It is essential in the fields of science, law, research, and critical thinking, where objective and reliable evidence is necessary to make informed judgments or draw accurate conclusions. The strength and validity of evidence depend on factors such as its reliability, relevance, consistency, and the methods used to gather and analyze it.
Learn more about Evidence here;
https://brainly.com/question/29022612
#SPJ11
The goal of a strategic business plan is which of the following? Select one.
a. Create competitive advantage
b. Drive competitors out of business
c. Create a monopolistic market
D. Improve employee morale
The goal of a strategic business plan is to create competitive advantage. A strategic business plan is a blueprint for how a business will achieve its goals and objectives. Option a is correct.
It is a comprehensive plan that outlines the strategies and tactics a business will use to achieve its mission and vision. In order to create a strategic business plan, the business needs to conduct a thorough analysis of the internal and external environment. The internal analysis looks at the strengths and weaknesses of the business, while the external analysis looks at the opportunities and threats in the industry and market. Once the analysis is complete, the business can develop strategies that will help it achieve its goals. These strategies should be based on the analysis and should take into account the strengths and weaknesses of the business as well as the opportunities and threats in the market. The goal of the strategic business plan is to create competitive advantage. Competitive advantage is the ability of a business to outperform its competitors in the market. This can be achieved by offering superior products or services, having better customer service, or having a more efficient and effective business model. By creating competitive advantage, the business can increase its market share and profitability.
To know more about business visit:
https://brainly.com/question/8119526
#SPJ11
ok t ces Manufacturing costs for Davenport Company during 2018 were as follows: $ 25,000 Beginning Finished Goods. 1/1/18 Beginning Raw Materials, 1/1/18 Beginning Vork in Process, 1/1/18 Direct Labor
Davenport Company's manufacturing costs for 2018 included a beginning finished goods inventory of $25,000, as well as beginning raw materials, work in process, and direct labor costs.
Davenport Company's beginning finished goods inventory of $25,000 indicates that they had goods available for sale at the beginning of the year.
Beginning raw materials, work in process, and direct labor costs are all necessary components of manufacturing.
The beginning raw materials inventory would represent the cost of materials purchased but not yet used, the beginning work in process inventory would represent the cost of partially completed goods, and the direct labor costs would represent the employee wages and benefits associated with the production process.
All of these costs, when combined with other expenses such as overhead, would be used to calculate the total cost of goods manufactured for the year.
Understanding these costs is essential for effectively managing the manufacturing process and determining the profitability of the company's operations.
Learn more about Davenport here.
https://brainly.com/questions/30638291
#SPJ11
the data in the table shows the price and quantity supplied for curtains. using the midpoint method, what is the price elasticity of supply from point c to point d ?
The price elasticity of supply (PES) is a measure of the sensitivity of the quantity of goods supplied to a shift in price. The midpoint method is used to calculate price elasticity of supply between two points. It is calculated by dividing the percentage change in the quantity supplied by the percentage change in the price.
Using the midpoint method, the formula for calculating the price elasticity of supply is:
PES = ((Q2 - Q1)/((Q2 + Q1)/2))/((P2 - P1)/((P2 + P1)/2))
Where:
Q1 = initial quantity supplied
Q2 = new quantity supplied
P1 = initial price
P2 = new price
To find the price elasticity of supply from point C to point D in the table, we can use the midpoint formula.
The initial quantity supplied (Q1) is 60 and the new quantity supplied (Q2) is 90. Therefore:
(Q2 - Q1)/((Q2 + Q1)/2) = (90 - 60)/((90 + 60)/2) = 0.5
The initial price (P1) is $8 and the new price (P2) is $12. Therefore:
(P2 - P1)/((P2 + P1)/2) = (12 - 8)/((12 + 8)/2) = 0.44
Using the formula above, we can calculate the price elasticity of supply from point C to point D:
PES = ((Q2 - Q1)/((Q2 + Q1)/2))/((P2 - P1)/((P2 + P1)/2))
PES = 0.5/0.44
PES = 1.14
Therefore, the price elasticity of supply from point C to point D is 1.14. This means that the percentage change in quantity supplied is greater than the percentage change in price, indicating that the supply is elastic. If the price increases, the quantity supplied will increase more than proportionately. Similarly, if the price decreases, the quantity supplied will decrease more than proportionately.
To know more about elasticity visit
https://brainly.com/question/30999432
#SPJ11
For each of the following scenarios, determine whether the decision maker is risk neutral, risk averse, or risk loving.
a. A manager prefers a 20 percent chance of receiving $1400and an 80 percent chance of receiving to receiving for sure.
b. A shareholder prefers receiving $920 with certainty to an 80 percent chance of receiving $1100 and a 20 percent chance of receiving $200.
c. A consumer is indifferent between receiving $1360 for sure and a lottery that pays 2000 with a 60 percent probability and 400 with a 40 percent probability.
A person's decision to take on risk is dependent on their risk tolerance. It is important to understand the various types of risk tolerance before discussing the risk-neutral, risk-averse, and risk-loving scenario. People who are risk-neutral make decisions that are indifferent to risk; they are unconcerned with either positive or negative consequences and make choices based on expected outcomes alone.
Risk-neutral decision maker A risk-neutral decision-maker does not factor risk into their decision-making process. They are indifferent to the uncertainty surrounding the options they are considering. When presented with options, risk-neutral decision-makers prefer the option with the highest expected return, regardless of the amount of risk involved. a. A manager prefers a 20 percent chance of receiving $1400and an 80 percent chance of receiving to receiving for sure. In the given scenario, the manager prefers an 80 percent chance of receiving $1000 to receiving $1000 for sure. Because the manager is risk-neutral, he or she prefers the option with the highest expected value, which in this scenario is the 80 percent chance of receiving $1000. Risk-averse decision maker Risk-averse decision-makers prefer options with lower expected returns but less risk. They are more concerned with the negative consequences of risk than with the potential rewards of taking on risk. They choose options that protect them from risk even if it means giving up some potential gain. b. A shareholder prefers receiving $920 with certainty to an 80 percent chance of receiving $1100 and a 20 percent chance of receiving $200.In the given scenario, the shareholder prefers the option with the guaranteed return of $920 rather than taking the risk with an 80 percent chance of receiving $1100 and a 20 percent chance of receiving $200. Because the shareholder is risk-averse, he or she prefers to avoid risk, even if it means accepting a lower expected return. Risk-loving decision maker Risk-loving decision-makers prefer to take on greater risk in the hope of achieving greater rewards. They choose options with higher expected returns, even if it means taking on more risk. They are less concerned with the negative consequences of risk and more focused on the potential rewards of taking on risk. c. A consumer is indifferent between receiving $1360 for sure and a lottery that pays 2000 with a 60 percent probability and 400 with a 40 percent probability. In the given scenario, the consumer is indifferent between receiving $1360 for sure and a lottery that pays 2000 with a 60 percent probability and 400 with a 40 percent probability. As a result, the consumer is risk-neutral. They are unconcerned with the risk involved and are choosing based on the expected return of each option.
To know more about risk tolerance visit :
https://brainly.com/question/32371642
#SPJ11
The analysis 1- Clearly explain the source of the interest rate used. 2- Analyze different alternatives of of acquiring the product/service by using both Present worth analysis and annual worth analysis. 3- Comment on the results of both analysis and explain the meaning of each number you get, i.e. What does it mean that the present worth of an alternative is X? what does it mean that the annual worth of an alternative is Y? 4- Compare between the alternatives and draw a proper conclusion.
The analysis involves explaining the source of the interest rate, analyzing alternatives using Present Worth (PW) and Annual Worth (AW) analysis, interpreting the results, comparing the alternatives, and drawing a conclusion.
1. Source of the Interest Rate:
The interest rate used in the analysis should be clearly stated and sourced from market rates or the company's cost of capital.
2. Alternatives and Analysis:
Different alternatives for acquiring the product/service should be analyzed using PW and AW analysis. PW calculates the net value by discounting cash flows to the present, while AW calculates the equivalent annual cash flow for each alternative.
3. Interpretation of Results:
The results of PW and AW analyses should be interpreted:
- PW: Positive PW indicates profitability, negative PW suggests a loss.
- AW: Higher AW signifies a more financially beneficial alternative.
4. Comparison and Conclusion:
Comparing PW and AW values, cash flow magnitude and timing, and considering qualitative factors, a comparison is made between alternatives. The alternative with the highest PW or AW may be the most financially attractive, but other factors like risk and feasibility should be considered. A proper conclusion is drawn based on a comprehensive evaluation.
To know more about Present Worth and Annual Worth, click here: brainly.com/question/20116136
#SPJ11
Consider a baseline long run steady state equilibrium where output is 22 trillion dollars and the price level is 100. Note: price Expectation is the same as price level at the long run steady state equilibrium & unemployment is 5% or lower A) Starting from the baseline, suppose COVID 19 hits this economy. If this disease only makes workers sick can you show how would the long run steady state equilibrium will be disrupted? Use a graph called Graph 2á. Explain if as a policymaker you will want the market adjustment process to help you come back to the equilibrium in this case (you can make changes in Graph 2A to make your point)? B) Starting from the baseline, suppose COVID 19 hits this economy. If this disease makes workers sick and makes consumers fearful go out; can you show how would the long run steady state equilibrium will be disrupted? Use a graph called Graph 2B. Explain if as a policymaker you will want the market adjustment process to help you come back to the equilibrium in this case (you can make changes in Graph 2B to make your point)?
A) Due to workers getting sick, the long run equilibrium will have lower output and higher price level. As a policymaker, monetary and fiscal policy will be introduced int the economy. B) Due to workers getting sick and consumer fear, the long run equilibrium will have lower output and lower price level. As a policymaker, fiscal stimulus and income support should be provided.
A) Graph 2á: Disruption due to Workers Getting Sick
In the baseline long run steady state equilibrium, output is 22 trillion dollars and the price level is 100.
If COVID-19 only affects workers by making them sick, the disruption can be shown in Graph 2á.
Here's a description of the graph and the market adjustment process:
Graph 2á:
Output (Y) is on the vertical axis.
Price level (P) is on the horizontal axis.
The long run aggregate supply (LRAS) curve represents the baseline long run steady state equilibrium at output level 22 trillion dollars and a price level of 100.
The aggregate demand (AD) curve intersects the LRAS curve at the equilibrium point E, representing the baseline equilibrium.
Disruption due to workers getting sick:
With workers falling sick, labor supply decreases, leading to a decrease in the economy's productive capacityThis shift in the aggregate supply (AS) curve causes a leftward shift from the LRAS curve to a new short-run aggregate supply (SRAS) curveThe new equilibrium point, let's call it E', occurs at a lower output level and potentially higher price level.Output decreases, and the price level may increase due to supply constraints and reduced productivity.As a policymaker, you would want the market adjustment process to help the economy return to the original equilibrium. In this case, you may consider implementing expansionary policies to stimulate the economy and restore output and employment levels. For example:
Monetary policy: Lowering interest rates to encourage borrowing and investment.Fiscal policy: Increasing government spending or reducing taxes to boost aggregate demand.These policies aim to shift the AD curve to the right, bringing the economy back to its long-run equilibrium by increasing output and reducing the price level.
B) Graph 2B: Disruption due to Workers Getting Sick and Consumers' Fear
In the baseline long run steady state equilibrium, output is 22 trillion dollars, and the price level is 100.
If COVID-19 affects both workers by making them sick and consumers by instilling fear that reduces their willingness to go out, the disruption can be shown in Graph 2B. Here's an of the graph and the market adjustment process:
Graph 2B:
Output (Y) is on the vertical axis.
Price level (P) is on the horizontal axis.
The long run aggregate supply (LRAS) curve represents the baseline long run steady state equilibrium at output level 22 trillion dollars and a price level of 100The aggregate demand (AD) curve intersects the LRAS curve at the equilibrium point E, representing the baseline equilibrium.Disruption due to workers getting sick and consumers' fear:
With workers falling sick and consumers being fearful, both labor supply and consumer spending decrease simultaneously.This leads to a significant decrease in the economy's productive capacity and aggregate demand.The AS curve shifts leftward from the LRAS curve to a new short-run aggregate supply (SRAS) curve, while the AD curve shifts leftward as well.The new equilibrium point, let's call it E', occurs at a lower output level and potentially lower price level compared to the baseline equilibrium.As a policymaker, you would want the market adjustment process to help the economy return to the original equilibrium. In this case, you may consider implementing expansionary policies to stimulate both supply and demand. Some possible policy measures include:
Targeted fiscal stimulus: Direct government spending in critical sectors, such as healthcare and infrastructure, to boost demand and create jobs.Income support for affected individuals: Providing financial assistance to workers who are sick or have lost their jobs, alleviating their financial concerns and increasing consumer.Learn more about aggregate supply curve here: https://brainly.com/question/15100476
#SPJ11
Suppose that due to the reduced use of a local highway, the local government would reduce its
purchases of concrete. As a result, there is a reduction in the quantity of concrete supplied from
8 million to 7 million cubic meters per year. The reduction in the concrete produced will drive the
concrete price down from RM5.5 per cubic meter to RM4.5 per cubic meter. In addition, the
elasticity of demand in the concrete market at the new equilibrium is -0.35.
a) From the perspective concrete producers, calculate the change in the producer surplus
and report whether it is gain or a loss.
b) Calculate the change in the consumer surplus and report whether it is a gain or loss
c) Calculate the change in the social surplus and report whether it is a gain or a loss
the perspective of concrete producers, there is a loss of 1.5 million RM in producer surplus.
a) To calculate the change in producer surplus, we need to find the area of the producer surplus before and after the change in quantity supplied.
Producer Surplus before the change:
PS1 = (1/2) * (Q1 - P1) * Q1
Where Q1 = 8 million cubic meters (original quantity supplied)
P1 = RM5.5 per cubic meter (original price)
PS1 = (1/2) * (8 - 5.5) * 8 = 12 million RM
Producer Surplus after the change:
PS2 = (1/2) * (Q2 - P2) * Q2
Where Q2 = 7 million cubic meters (new quantity supplied)
P2 = RM4.5 per cubic meter (new price)
PS2 = (1/2) * (7 - 4.5) * 7 = 10.5 million RM
Change in Producer Surplus:
ΔPS = PS2 - PS1 = 10.5 - 12 = -1.5 million RM
The change in producer surplus is a loss of 1.5 million RM.
b) To calculate the change in consumer surplus, we also need to find the area of the consumer surplus before and after the change in price.
Consumer Surplus before the change:
CS1 = (1/2) * (P1 - 0) * Q1
CS1 = (1/2) * (5.5 - 0) * 8 = 22 million RM
Consumer Surplus after the change:
CS2 = (1/2) * (P2 - 0) * Q2
CS2 = (1/2) * (4.5 - 0) * 7 = 15.75 million RM
Change in Consumer Surplus:
ΔCS = CS2 - CS1 = 15.75 - 22 = -6.25 million RM
The change in consumer surplus is a loss of 6.25 million RM.
c) Social Surplus is the sum of producer surplus and consumer surplus. We can calculate the change in social surplus by adding the changes in producer and consumer surplus.
Change in Social Surplus:
ΔSS = ΔPS + ΔCS = -1.5 - 6.25 = -7.75 million RM
The change in social surplus is a loss of 7.75 million RM.
In summary, From the perspective of consumers, there is a loss of 6.25 million RM in consumer surplus. Overall, there is a loss of 7.75 million RM in social surplus due to the reduction in quantity supplied and the decrease in price in the concrete market.
To know more about market visit-
brainly.com/question/30455471
#SPJ11
Quincy is single. His income of $250,300 includes: wages of $210,000, $1,500 of interest, $3,500 of tax-exempt interest, $2,500 of dividends, $30,000 of rental income, and $2,800 of capital gains. He has no other investment income, and none of the income is from a trade or business. Quincy will calculate his net investment income tax on ________________.
Quincy will calculate his net investment income tax on $2,500.
Net investment income tax is a tax imposed on certain types of investment income for individuals with high income. It is calculated based on the lesser of the taxpayer's net investment income or the excess of the taxpayer's modified adjusted gross income (MAGI) over a specified threshold. In Quincy's case, his net investment income includes $2,500 of dividends.
Dividends are considered investment income and are subject to net investment income tax. However, the other types of income Quincy has, such as wages, interest, tax-exempt interest, rental income, and capital gains, are not included in the calculation of net investment income tax. They are either exempt or not classified as investment income.
Therefore, Quincy will only calculate his net investment income tax on the $2,500 of dividends he received. The tax rate for net investment income can vary depending on Quincy's income level and filing status, but it is generally an additional 3.8% tax on the net investment income amount.
Learn more about Income tax
brainly.com/question/21595302
#SPJ11
The Columbus-Taino partnership is explicit: The Taino Indians
will be punished if they don’t find gold.
TRUE/FALSE
False. The statement that the Columbus-Taino partnership is explicit and that the Taino Indians will be punished if they don't find gold is not accurate. While it is true that Christopher Columbus established a partnership with the Taino people upon arriving in the Caribbean, the notion that the partnership was explicitly based on the Taino Indians finding gold and facing punishment is a misrepresentation.
The Columbus-Taino partnership initially involved trade and cooperation, with Columbus seeking support from the Taino people in navigating the region and establishing a settlement. However, over time, conflicts and tensions arose between the two groups, leading to exploitative practices and mistreatment of the indigenous population. These actions were driven by factors such as the desire for wealth and the search for valuable resources, including gold, but it is important to note that the partnership was not explicitly based on the threat of punishment for not finding gold.
The history of Columbus' interactions with the indigenous peoples of the Caribbean is complex and marked by a legacy of colonization and its negative consequences. It is crucial to approach this history with nuance and an understanding of the broader context of European colonization in the Americas.
To more about Christopher Columbus, visit:
brainly.com/question/32277653?
#SPJ11
What are the market segments of the e bike market from the
consumers point of view (e.g. people who ride bikes to work) and
how would you calculate the size of them?
Market segments for e-bikes from the consumer point of view can be categorized into three different segments. These are as follows:Segment of e-bikes for commutersSegment of e-bikes for leisure activitiesSegment of e-bikes for people in hilly areas.
Segment of e-bikes for commuters:This segment comprises of consumers who choose e-bikes to commute to work. This can be seen as an affordable, eco-friendly, and healthy alternative to cars. This segment of the market has a high potential for growth, as it covers the largest consumer group.
Segment of e-bikes for leisure activities:This segment comprises of consumers who use e-bikes for leisure purposes like touring, cycling, or hiking. These types of e-bikes are ideal for mountainous terrains and long distance rides. It is important to note that this segment of the market has a higher price range as compared to the other two.
To know more about Market segments visit:
https://brainly.com/question/14315539
#SPJ11
Bottleneck Profit Product A has a unit contribution margin of $24. Product B has a unit contribution margin of $30. Product A requires four testing hours, while Product B requires six testing hours. Determine the unit contribution margin per production bottleneck hour for each product, assuming testing is a bottleneck constraint. Product A $ Product B $ is the most profitable in using bottleneck resources.
Product A $6 and Product B $5. Product A is the most profitable in using bottleneck resources.
The bottleneck constraint in the production process is a process or a resource that has limited capacity. The constraint plays a crucial role in the determination of the output of the production process and thus should be analyzed carefully. In this case, testing is a bottleneck constraint. The production process has two products; A and B. Product A has a unit contribution margin of $24 while Product B has a unit contribution margin of $30. Product A requires four testing hours while Product B requires six testing hours.Therefore, the unit contribution margin per production bottleneck hour is calculated as follows:Unit contribution margin per production bottleneck hour for Product A is;Unit Contribution margin = $24Production bottleneck hour = 4 testing hoursUnit contribution margin per production bottleneck hour for Product A = 24/4 = $6Similarly, Unit contribution margin per production bottleneck hour for Product B is;Unit Contribution margin = $30Production bottleneck hour = 6 testing hoursUnit contribution margin per production bottleneck hour for Product B = 30/6 = $5The most profitable product is the one that has the highest unit contribution margin per production bottleneck hour. In this case, Product A has a higher unit contribution margin per production bottleneck hour than Product B. Thus, Product A is the most profitable in using bottleneck resources.
To know more about resources visit:
https://brainly.com/question/14289367
#SPJ11
Assume that a machine with a cost of $90 000 has accumulated depreciation of $48 000 on the date of its disposal. What is the profit or loss on disposal of the old machine if it was traded-in for $40 000 on a new machine? (Ignore GST.)
Which of the following statements about depreciation is true?
a.
The cash account is affected by depreciation charges.
b.
Accumulated depreciation is shown in the financial statements as a contra-expense account.
c.
Accumulated depreciation represents the amount of an asset's cost that has been transferred to depreciation expense to date.
d.
Depreciation represents the amount of cash available to replace assets when they wear out.
Regarding the statement about depreciation, the correct option is:
c. Accumulated depreciation represents the amount of an asset's cost that has been transferred to depreciation expense to date
To calculate the profit or loss on disposal of the old machine, we need to compare the trade-in value with the net book value of the machine.
Net book value = Cost of machine - Accumulated depreciation
Net book value = $90,000 - $48,000 = $42,000
Profit or loss on disposal = Trade-in value - Net book value
Profit or loss on disposal = $40,000 - $42,000 = -$2,000
Therefore, there is a loss of $2,000 on the disposal of the old machine.
learn more about depreciation here:
https://brainly.com/question/30531944
#SPJ11
Scarcity is defined as "The limits placed on the amounts and types of goods and services available for consumption as the result of there being only limited economic resources from which to produce output" (McConnel et all., 2021). Three items that would be considered scarce are coffee, donuts, and computers. "Things that are scarce are both limited and desirable" (Georgia Department of Education, 2017). Coffee, donuts, and computers are scarce because there are only so many of them in the world (limited) and humans want to consume these items (desirable). Coffee is desired as a caffeinated drink, donuts are desired as a tasty snack, and computers are desired for education and work purposes using the internet. The four scarce resources in economics are land, labor, capital, and entrepreneurship. These four resources all play a part in a fried chicken fast food restaurant. In this example, the land resources are the farmland used to raise the chickens as well as the land for the restaurants. The labor includes the people that tend to the chickens, transport the chickens, and prepare the chickens to be cooked and eaten. The capital is any equipment used to transport the chickens such as trucks as well as cooking equipment to produce the fried chicken. The entrepreneurship is shown in the person who came up with the recipe to make the fried chicken taste good as well as the person who came up with the idea of where to open the restaurants and how to brand them. I believe that capital would have the largest impact on expanding the production possibilities curve because having more machinery and equipment to produce goods would increase the maximum quantity of goods that can be produced and thus shift the PPC outward. I think that land, labor, and capital can only be stretched so far without upgrading the equipment and that capital is the most crucial in efficient production of goods.
Your understanding of scarcity and its application to coffee, donuts, and computers is accurate. These items are considered scarce because there is a limited quantity of them available, and people have a desire to consume them.
Regarding the four scarce resources in economics, your explanation of how they apply to a fried chicken fast food restaurant is appropriate.
is necessary for the farmland and restaurant locations, labor involves the people involved in various tasks, capital encompasses the equipment and machinery used in transportation and cooking, and entrepreneurship involves the creativity and innovation behind the recipe and the restaurant concept.
In terms of expanding the production possibilities curve (PPC), you ly identify capital as having the potential to have the largest impact. By investing in machinery and equipment, the production process can become more efficient, allowing for increased output and shifting the PPC outward. Capital investment can enhance productivity, reduce costs, and enable higher production levels, making it a crucial factor in expanding the production possibilities.
While land and labor are essential resources, capital investment can often yield greater returns in terms of expanding production capabilities. However, it's important to note that all four resources—land, labor, capital, and entrepreneurship—work in tandem and contribute to the overall efficiency and growth of a business or industry.
Learn more about creativity here:
https://brainly.com/question/6116336
#SPJ11
Suppose that in a market inverse supply is given by PS (Q) = 5Q² +2Q +30 and inverse demand is given by PD (Q) = 1713 - 12Q. a) (3 marks) Find the equilibrium price and quantity supplied. b) (6 marks) Compute consumer surplus. c) (6 marks) Compute producer surplus.
a) The equilibrium price is $67.50 and the equilibrium quantity supplied is 52 units.
To find the equilibrium price and quantity supplied, we set the inverse supply equal to the inverse demand:
5Q² + 2Q + 30 = 1713 - 12Q
Rearranging and simplifying the equation, we get:
5Q² + 14Q - 1683 = 0
Using the quadratic formula, we solve for Q and find two possible values. Since quantity cannot be negative, we take the positive value, which is 52. Substituting this value into the inverse demand equation, we find the equilibrium price to be $67.50.
b) The consumer surplus is $23,917.50.
Consumer surplus is calculated as the area between the demand curve and the equilibrium price, up to the equilibrium quantity. Using the formula for the area of a triangle, we find the consumer surplus to be (1/2) * (67.50 - 22.50) * 52 = $23,917.50.
c) The producer surplus is $9,717.
Producer surplus is calculated as the area between the supply curve and the equilibrium price, up to the equilibrium quantity. Using the formula for the area of a triangle, we find the producer surplus to be (1/2) * (67.50 - 37.50) * 52 = $9,717.
learn more about quantity supplied here:
https://brainly.com/question/28285610
#SPJ11
Using the following information find the current manufacturing costs: Work-in-process Inventory: Ending balance $ 22,000 Cost of goods manufactured 21.000 Beginning balance 8.000 Current manufacturing costs ? Instructions: Round your answer to the nearest dollar, and do not include cents, commasor S. For example: If the answer is 10000 simply write 10000 and NOT 510.000, $10,000.00 10,000.00 $10000.00 or 10000.00)
Work-in-process Inventory: Ending balance $ 22,000Beginning balance 8.000Cost of goods manufactured 21.000Current manufacturing costs?
.To calculate the current manufacturing cost, use the following formula: Current manufacturing costs = Work in process inventory - Beginning balance + Cost of goods manufactured Current manufacturing costs = $22,000 - $8,000 + $21,000Current manufacturing costs = $35,000Therefore, the current manufacturing cost is $35,000. To find the current manufacturing costs, we need to calculate the change in work-in-process inventory.
Change in Work-in-Process Inventory = Ending Balance - Beginning Balance Change in Work-in-Process Inventory = $22,000 - $8,000 Change in Work-in-Process Inventory = $14,000 The current manufacturing costs are equal to the change in work-in-process inventory, which is $14,000. Therefore, the current manufacturing costs are $14,000.
Read more about Inventory here;https://brainly.com/question/24868116
#SPJ11
auditing class
SELECT ONE
The review of audit working papers by the audit partner is
normally completed:
a. Immediately as each working paper is completed
b. Prior to year-end
c. After issuance of th
It is necessary to wait until the audit is complete and the auditor’s report has been issued before the audit partner can review the working papers. Option(A) is correct
Audit working papers are documents prepared by auditors and kept on file as evidence to support their audit opinion. Audit partners review these papers to ensure that all necessary procedures have been conducted, standards have been followed, and that the evidence is sufficient to support their opinion. Given the importance of this task, it is important that the review of audit working papers by the audit partner is done thoroughly and thoughtfully.The review of audit working papers by the audit partner is normally completed after the issuance of the auditor’s report. This is because the audit partner is responsible for ensuring that the audit has been conducted in accordance with auditing standards, that all necessary procedures have been performed, and that the evidence is sufficient to support the audit opinion. As a result, it is necessary to wait until the audit is complete and the auditor’s report has been issued before the audit partner can review the working papers.
To know more about audit partner visit :
https://brainly.com/question/30469397
#SPJ11
Match the team development stages with the characteristics provided. (Stages may be used more than once; there is only one stage per characteristic.)
Work begins and reality sets in -
Team members test the limits of project manager -
attempts to define and plan the tasks that need to be done -
Trust develops -
Conflict emerges and tension increases -
The project manager fully delegates responsibility and authority -
The project manager needs to provide direction and structure
1. Performing 2. Storming 3. Forming 4. Norming
Team development stages and their characteristics are:1. Performing: At this stage, team members are confident, motivated, and are committed to achieving team goals. Trust has already been established, and the team is highly effective and productive.
2. Storming: At this stage, team members are exploring the limits of project managers, team roles, and their responsibilities. They are finding out what they can and cannot do within the team. As a result, conflicts and tension arise.3. Forming: This is the stage where the team meets, and they are getting to know one another. The project manager attempts to define and plan the tasks that need to be done. Members are typically on their best behavior.4. Norming: At this stage, trust develops, and team members become increasingly comfortable with one another. Differences are resolved through negotiation and collaboration.
The project manager needs to provide direction and structure. The team is ready to work together, and morale is high. In conclusion, "The project manager fully delegates responsibility and authority" doesn't match with any of the given characteristics. Therefore, the answer to the question is: Forming - attempts to define and plan the tasks that need to be done Storming - Team members test the limits of project manager Norming - Trust develops Performing - Work begins and reality sets in.
To know more about development visit :-
https://brainly.com/question/28423077
#SPJ11
The team development stages map to respective behaviors and actions: Forming is when work begins and the project manager provides structure, Storming is when team members test the limits and conflicts may arise, Norming is when tasks are defined, planned, and trust forms, and Performing is when the project manager delegates authority.
Explanation:The team development stages can be matched with the provided characteristics as follows:
Work begins and reality sets in - 3. FormingTeam members test the limits of project manager - 2. Stormingattempts to define and plan the tasks that need to be done - 4. NormingTrust develops - 4. NormingConflict emerges and tension increases - 2. StormingThe project manager fully delegates responsibility and authority - 1. PerformingThe project manager needs to provide direction and structure - 3. FormingThis matches these stages to common behaviors and activities that occur during these phases in a team's development.
Learn more about Team Development Stages here:https://brainly.com/question/34955435
#SPJ6
OUTLINE FOR ASSESSMENT 02 1500 WORDS REPORT LEADERSHIP STYLE IN AN INNOVATIVE ORGANISATIONAL CHANGE PROCESS 1. Executive Summary 2. Introduction 3. Overview of the Organisation 4. Leadership Style for the Organisation 5. Benefits of Suggested Leadership Style for that Organisation 6. Potential Risks and Recommendation 7. Conclusion 8. Appendix (4 meeting minutes to prepare this report: a) 1st meeting to discuss about the overview of organisation; b) 2nd meeting to discuss about different leadership styles; c) 3rd meeting to suggest the best leadership style for this organisation; d) 4th meeting to have the briefing to prepare this report) 9. References.
The outline for Assessment 02 requires a 1500-word report on the leadership style in an innovative organizational change process.
The report should consist of an executive summary, introduction, an overview of the organization, leadership style for the organization, benefits of suggested leadership style, potential risks, and recommendations, a conclusion, appendix, and references. The appendix should include four meeting minutes that led to the preparation of this report. The first meeting should discuss the organization's overview, the second meeting should discuss different leadership styles, the third meeting should suggest the best leadership style for the organization, and the fourth meeting should brief on how to prepare the report.
The report should focus on the leadership style that will best suit the organization's innovative organizational change process and highlight the benefits and potential risks associated with the suggested leadership style. The report should be well-researched and provide relevant references to support its arguments.
To know more about leadership visit:-
https://brainly.com/question/13379587
#SPJ11
Which two of the following statements are true of the Gig Economy? a. Gig work today is often made possible by technology. b. Gig workers only work for one company or person. c. Many workers value the flexibility allowed by these types of jobs. d. Companies generally provide benefits for gig workers.
The two statements that are true of the Gig Economy are:
a. Gig work today is often made possible by technology.
c. Many workers value the flexibility allowed by these types of jobs.
Statement a is true because the Gig Economy has seen significant growth and prevalence due to advancements in technology. Online platforms and digital marketplaces connect gig workers with job opportunities and provide a means for seamless transactions and communication.
Statement c is true because one of the main attractions of gig work is the flexibility it offers. Gig workers have the autonomy to choose their working hours, projects, and clients, allowing them to balance work with personal commitments or pursue multiple gigs simultaneously.
Statement b is false because gig workers are not limited to working for only one company or person. They have the freedom to work for multiple clients or platforms simultaneously, providing services or completing projects on a freelance or independent basis.
Statement d is also false because companies in the gig economy generally do not provide traditional employment benefits such as healthcare, retirement plans, or paid leave. Gig workers are often considered independent contractors, responsible for their own benefits and protections.
It is important to note that the nature and dynamics of the gig economy can vary across different industries, countries, and individual experiences. The statements above reflect general trends and characteristics observed in the gig economy.
Learn more about the characteristics and implications of the Gig Economy here:
brainly.com/question/22031487
#SPJ11
how can you provide a positive customer experience amazon answer
To provide a positive customer experience, Amazon focuses on prompt delivery, easy navigation, competitive pricing, reliable customer support, and personalized recommendations based on user preferences.
Customers are individuals or entities that purchase goods or services from businesses. They play a central role in the economy, driving demand and shaping market trends. Customer satisfaction is crucial for businesses to thrive and succeed. Understanding customer needs, preferences, and expectations is essential for delivering a positive customer experience. Businesses strive to attract and retain customers by offering high-quality products, personalized services, competitive pricing, convenience, and excellent customer support. Building strong relationships with customers through effective communication and addressing their concerns helps foster loyalty and repeat business. Customer feedback and reviews also provide valuable insights for businesses to improve their offerings and meet customer expectations.
Learn more about Customers here;
https://brainly.com/question/26313265
#SPJ11
One company is considering one project that will cost $23,000 now and will result in an after-tax cash flow of $2.1 million at the end of the first year and these cash flows will grow at 2% per year indefinitely. The firm has a debt-equity ratio of 0.8, a cost of equity of 11%, and an after-tax cost of debt of 4.6%. This new project is somewhat riskier than the usual project the firm undertakes. Thus, the management team decides to discount the cash flows of the project by applying an adjustment factor of +3% to the cost of capital of the firm. Should the firm take on this project?
To determine whether the firm should take on the project, we need to calculate the present value of the project's cash flows and compare it to the initial investment.
The cost of capital is adjusted by adding 3% due to the project's higher risk. The adjusted cost of equity is 11% + 3% = 14% and the after-tax cost of debt remains at 4.6%.
Using the adjusted cost of capital, we can discount the cash flows of the project. The cash flows are $2.1 million at the end of the first year and are expected to grow at 2% per year indefinitely.
To calculate the present value, we discount the cash flows by the adjusted cost of capital. Then we subtract the initial investment of $23,000 to determine the net present value (NPV) of the project.
If the NPV is positive, it indicates that the project's present value of cash flows exceeds the initial investment, suggesting it is a profitable investment. Conversely, if the NPV is negative, it implies that the project is not expected to generate sufficient returns to cover the initial investment.
Therefore, by comparing the NPV to zero, we can determine whether the firm should take on the project or not.
To learn more about initial investment: -brainly.com/question/31635721
#SPJ11
q2 re
QUESTION 2 Which of the following statements is correct? 1. Treasury bills are short-term debt instruments issued by companies and/or the government. II. Repurchase agreements have a very liquid secon
The correct statement is: II. Repurchase agreements have a very liquid secondary market.
Treasury bills (T-bills) are short-term debt instruments issued by the government, not companies. They are typically issued by the government to fund short-term financial needs and are considered to be low-risk investments.
Repurchase agreements (repos) are financial transactions in which one party sells a security to another party with an agreement to repurchase it at a later date. Repos are commonly used in the money markets for short-term borrowing and lending. They have a very liquid secondary market, meaning that they can be easily bought or sold with minimal impact on their price.
Learn more about T-bill here:
brainly.com/question/22530088
#SPJ11