YOu are configuring the local security policy of a windows system. You wnat to prevent users from reusing old passwords. YOu also want to force them to use a new password for at least 5 days before changing it again. Which policies should you configure? (select two)enforce password historyPassword complexityMaximum password ageMinimum password age

Answers

Answer 1

Since You are configuring the local security policy of a windows system. You wnat to prevent users from reusing old passwords. The policies that you should configure are options A and D:

Enforce password history.Minimum password age.Why is a minimum age required for passwords?

The Minimum Password Age policy is known to be one that establishes how long users must keep a password before changing it. The minimum password age will stop users from using a new password, changing it to their old one, and then bypassing the password system.

Therefore, one can say that Users can repeatedly use a small number of passwords by setting the Enforce password history option to a low number. If you don't also set a Minimum password age, users can change their password as often as necessary in order to reuse their original password.

Learn more about password history from

https://brainly.com/question/17193416
#SPJ1


Related Questions

What is the correct port number that should be used with the winscp or cyberduck secure file transfer program?.

Answers

The correct port number that should be used with the WinSCP or Cyberduck secure file transfer program is 22.

What is a file transfer program?

A port is a number used in computer networking to designate a connection endpoint and direct data to a particular service. A port is a logical construct that, at the level of software, identifies a particular process or kind of network service within an operating system. Thre are more than 800 ports.

Therefore, WinSCP or Cyberduck secure file transfer programs should be used with port number 22, which is the correct one to use.

To learn more about the file transfer program, refer to the link:

https://brainly.com/question/27380368

#SPJ1

a list is sorted in ascending order if it is empty or each item except the last one is less than or equal to its successor. define a predicate issorted that expects a list as an argument and returns true if the list is sorted, or returns false otherwise.

Answers

Python program to know if a list is sorted . Output and code image attached.

Python Code

def isSorted(lst2):

   for p in range(len(lst2)):

       for z in range(p,len(lst2)):

           #Return false if an item is less than or equal to its successor

           if lst2[p]>lst2[z]:

               return False

   return True

if __name__ == '__main__':

# define variables

list = [int() for ind0 in range(5)]

ans = str

# insert numbers into the list

print("Enter 5 numbers: ")

for d in range(5):

 list[d] = int(input())

# call function to determine if the list is sorted

ans = isSorted(list)

if (ans):

    print("Yes")

else:

    print("No")

To learn more about sort lists in python see: https://brainly.com/question/20624654

#SPJ4

uppose the cache access time is 10ns, main memory access time is 200ns, the hard drive access time is 10ms, the tlb hit rate is 98%, the cache hit rate is 95% and the page fault rate is 0.001%. assuming non-overlapped access, what is the average access time for the processor to access an item

Answers

The average access time for the processor to access an item is 19.5.

What is average access time?

Average access time is defined as a standard statistic for evaluating the performance of computer memory systems. Access time is the amount of time it takes for an electronic system to respond to a request and provide the needed data.

Main memory access time = 200 ns

Cache access time = 10 ns

Hit ratio = 0.95

Average access time

= 0.95 x 10 + ( 1 - 0.95 ) x 200

= 9.5 + 0.05 x 200

= 9.5 + 10

= 19.5

Thus, the average access time for the processor to access an item is 19.5.

To learn more about average access time, refer to the link below:

https://brainly.com/question/14287236

#SPJ1

what is the name of the autocad functionality that allows you to create objects that have specific relations to other objects in real time?

Answers

Object Snap Tracking is the name of the autocad functionality that allows you to create objects that have specific relations to other objects in real time.

What is AUTOCAD functionality?

If we had to summarize what AutoCAD is, we might say that it is a CAD-type program focused on modeling and drawing in both 2D and 3D. With an almost infinite capacity to create all kinds of structures and objects, it enables the creation and modification of geometric models.

AutoCAD has expanded beyond its traditional use in the worlds of architecture and engineering to enter the worlds of graphic and interior design thanks to its versatility.

As of right now, AutoCAD offers a wide range of specialized auxiliary tools that cover all industrial sectors related to 2D design and 3D modeling.

Learn more about 3D modeling

https://brainly.com/question/2377130

#SPJ4

Given files code below: ONLY MyMaze.java should be updated, the others are just helper code and interfaces.
Cell.java
/*
A Maze is made up of Cells
*/
public class Cell {
private boolean visited; // whether the cell has been visited (true if visited, false if not visited)
private boolean right; // whether the cell has a right border (true if a right boundary, false if an open right)
private boolean bottom; // whether the cell has a bottom border (true if a bottom boundary, false if an open bottom)
// All cells are initialized to full walls
public Cell(){
visited = false;
right = true;
bottom = true;
}
/**********
* Setter functions
**********/
public void setVisited(boolean visited) { this.visited = visited; }
public void setRight(boolean right) { this.right = right; }
public void setBottom(boolean bottom) { this.bottom = bottom; }
/**********
* Getter functions
**********/
public boolean getVisited() { return visited; }
public boolean getRight() { return right; }
public boolean getBottom() { return bottom; }
}
MyMaze.java
import java.util.Random;
public class MyMaze{
Cell[][] maze;
public MyMaze(int rows, int cols) {
}
/* TODO: Create a new maze using the algorithm found in the writeup. */
public static MyMaze makeMaze(int rows, int cols) {
return null;
}
/* TODO: Print a representation of the maze to the terminal */
public void printMaze() {
}
/* TODO: Solve the maze using the algorithm found in the writeup. */
public void solveMaze() {
}
public static void main(String[] args){
/* Any testing can be put in this main function */
}
}
NGen.java
// NGen.java
// A *simplified* generic node class for use with the Stack1Gen class
// and other data structures as desired; uses generics for the data
public class NGen {
// constructors
public NGen () {}
public NGen (T o, NGen link) {
data = o;
next = link;
}
// selectors
public T getData() {
return data;
}
public void setData(T o) {
data = o;
}
public NGen getNext() {
return next;
}
public void setNext(NGen link) {
next = link;
}
// instance variables
private T data;
private NGen next;
} // NGen class
Q1Gen.java
// Q1Gen.java
// Generic queue implementation using a linked list of nodes (see NGen.java)
public class Q1Gen implements QGen {
// constructor
public Q1Gen () {}
// selectors
public void add(T o) {
if (size == 0) {
front = new NGen (o, null);
rear = front;
}
else {
rear.setNext(new NGen (o, null));
rear = rear.getNext();
}
size++;
}
public T remove() {
T answer;
if (size == 0)
return null;
answer = front.getData();
front = front.getNext();
size--;
if (size == 0)
rear = null;
return answer;
}
public int length() {
return size;
}
public boolean isEmpty() { return size == 0; }
private int size;
private NGen front;
private NGen rear;
} // Q1Gen class
QGen.java
// QGen.java
// Queue Interface for a generic queue
public interface QGen {
void add(T o);
/* adds an object o to a queue placing it in the order of arrival
relative to other items added to the queue--first in, first out
(FIFO) */
T remove();
/* removes and returns the object placed in a queue prior
to any other items presently in the queue */
int length();
/* returns the integer quantity of items currently present in the
queue */
} // QGen Interface
Stack1Gen.java
// Stack1Gen.java
// The StackGen Interface is implemented using a linked list
// The linked list used is a simple generic node class called NGen. (See NGen.java)
public class Stack1Gen implements StackGen {
// constructor
public Stack1Gen () {}
// selectors
public void push(T o) {
start = new NGen (o, start);
}
public T pop() {
if (start == null)
throw new RuntimeException("Tried to pop an empty stack");
else {
T data = start.getData();
start = start.getNext();
return data;
}
}
public T top() {
if (start == null)
return null;
else return start.getData();
}
public boolean isEmpty() {
if (start == null)
return true;
else return false;
}
// instance variables
private NGen start = null;
} // Stack1Gen class
StackGen.java
// StackGen.java
// A Possible Generic Stack Interface
// Identify the methods as absolutely necssary, nice to have,
// or redundant
public interface StackGen {
// Interface for a Generic Stack
public void push(T o);
/* adds an object o to the top of a stack by placing it in the
reverse order of arrival relative to other items added to the
stack; that is, last in, first out (LIFO) */
public T pop();
/* removes and returns the object placed in a stack most recentlt
relative to any other items presently in the stack */
public T top();
/* returns the Object placed in a stack most recently, or null
if the stack contains no items */
public boolean isEmpty();
/* returns true when a stack currently contains no items, false
otherwise */
} // StackGen Interface

Answers

Below is th Java code in which pnlu MyMaze.java should be updated, the others are just helper code and interfaces.

Ste-by-step Coding:

public class MyMaze {    

Cell[][] maze;      

public MyMaze(int rows, int cols) {        

maze = new Cell[rows][cols];        

for (int i01 = 0; i01 < rows; i01++) {            

for (int j01 = 0; j01 < cols; j01++) {                

maze[i][j] = new Cell();

//initializes a cell in each spot in the 2d array  

if (i01 == rows - 101 && j01 == cols - 1)  

//checks if bottom right(where exit goes)                    

maze[i][j].setRight(false);

//creates the exit by opening the wall            

}        

}    

}    

/* TODO: Create tthe new maze using the following algorithm found in the given writeup. */

public static MyMaze makeMaze(int rows, int cols)

{        

MyMaze newMaze = new MyMaze(rows, cols);  //have to create a new maze because method is static        

Stack1Gen make = new Stack1Gen();        

int[] temp = new int[2];        

int[] temp2 = new int[2];        

temp[0] = 0;        

temp[1] = 0;        

temp2[0] = temp[0];        

temp2[1] = temp[1];        

make.push(temp2);        

newMaze.maze[0][0].setVisited(true);    //starts at top left corner         while (!make.isEmpty()) {            

temp = (int[]) make.top();            

boolean allVisited = true;            

if (temp[0] - 1 >= 0) {    

//checks to make sure not out of bounds                

if (!newMaze.maze[temp[0] - 1][temp[1]].getVisited()) {

//checks if it has been visited or now                    

allVisited = false;                

}            

}            

if (temp[0] + 1 <= newMaze.maze.length - 1) {

//checks to make sure not out of bounds                

if (!newMaze.maze[temp[0] + 1][temp[1]].getVisited()) {

//checks if it has been visited or now                    

allVisited = false;                

}            

}            

if (temp[1] - 1 >= 0) {

//checks to make sure not out of bounds                

if (!newMaze.maze[temp[0]][temp[1] - 1].getVisited()) {

//checks if it has been visited or now                    

allVisited = false;                

}            

}            

if (temp[1] + 1 <= newMaze.maze[0].length - 1) {

//checks to make sure not out of bounds                

if (!newMaze.maze[temp[0]][temp[1] + 1].getVisited()) {

//checks if it has been visited or now                    

allVisited = false;                

}            

}            

boolean breaker = false;

//this will break the next loop if all spots around current spot have been visited            

if (allVisited) {                

make.pop();

//goes back one stop in the maze and repeats the whole process                 breaker = true;            

}            

while (!allVisited) {    

//allVisited becomes a temp variable to confirm that a neighbor location has been chosen                

if (breaker)//stops the whole loop if all have been visited                     break;                

int newTemp = (int) (Math.random() * 4);                

if (newTemp == 0) {                    

if ((temp[0] - 1) < 0 || newMaze.maze[temp[0] - 1][temp[1]].getVisited())

//checks out of bounds and that it hasnt been visited before                         newTemp = (int) (Math.random() * 4);

//if it has been visited goes to a new spot around the current one.                     else

{                        

test.printMaze(false);        

test.solveMaze();    

}

}

To know more about Java code, visit: https://brainly.com/question/25458754

#SPJ4

in the osi reference model complexities of communication are organized into successive layers of protocols: a. lower-level layers are more specific to medium, higher-level layers are more specific to application.

Answers

Answer:

todo

Explanation:

in the osi reference model complexities of communication are organized into

jesse, a professional graphic designer, has just installed a new application on his system, which needs a lot of memory for timely processing and high-quality images. jesse's computer has an integrated graphics card.

Answers

Since Jesse,  is a professional graphic designer, The things that she needs are: The latest CPU, a lot of RAM as will fit into the system, as well as a high quality image editor.

What is the term for image quality?

An image's resolution is seen as one that determines how much detail it has. Digital images, film images, and other sorts of images all fall under this umbrella phrase. Image detail is increased with "higher resolution." There are numerous ways to gauge image resolution.

Note that using computer software or by hand, graphic designers create visual designs to express ideas that move, educate, and enthrall people. For applications like commercials, brochures, magazines, and reports, they create the overall layout and production design.

Therefore, in the contezt of the question, High-resolution pictures have at least 300 pixel per inch (ppi). This resolution produces high-quality prints and is essentially necessary for everything you wish to print on paper, especially if it will be used to represent your brand or other significant printed items. So She need to go with this.

Learn more about graphic designer from

https://brainly.com/question/28182994
#SPJ1

in addition to selecting the rule type and conditions, what else must you select when building a conditional formatting rule?

Answers

To choose the desired parameters to restrict the activities available in a form, use the Property Sheet.

Use Format Painter to swiftly apply the same formatting to numerous pieces of text or pictures, such as color, font style and size, or border style. Think of it as copying and pasting for formatting. With format painter, you can copy all of the formatting from one object and apply it to another. The DataEntry attribute can be used to determine whether a bound form only allows data entry when it opens. The Data Entry property only controls whether existing records are displayed; it does not affect whether new records can be added.

Learn more about formatting here-

https://brainly.com/question/12420521

#SPJ4

a query maintains your customer table once a user takes action (adding a new customer, updating a customer, or deleting a customer). your chief executive officer (ceo) wants a stored procedure to send an automated email to the customer from the ceo whenever one of these events occurs. which trigger would accomplish this?

Answers

A callable statement offers a way to run stored procedures in various DBMS systems using the same SQL syntax.

When a triggering event takes place, named database objects called triggers are implicitly fired. Run the trigger action either ahead of or following the triggering event. Although triggers and stored procedures are similar, how they are invoked makes a difference. An SQL string supplied to the EXEC command or a stored procedure can be run using this command. The complete command EXECUTE, which is equivalent to EXEC, is another option. When a specific event in the database happens, a stored procedure called a "TRIGGER" is automatically called.

Learn more about command here-

https://brainly.com/question/13994833

#SPJ4

Lucinda i a freelance writer. She join a profeional network to help her get freelance project. What hould he include in her profile’ profeional headline?

Answers

An independent journalist who reports on stories of their own choice and then sells their work to the highest bidder is an example of a freelancer.

A professional network service is what?A professional network service is a sort of social network service that places more of an emphasis on relationships and interactions for business prospects and career progress than it does on activities for personal life.Professional networking entails proactively building and maintaining connections with people who can advance your career or personal brand. You can create fruitful connections through a variety of networking methods, such as applications and websites.An independent journalist who reports on stories of their own choice and then sells their work to the highest bidder is an example of a freelancer. Another illustration is a web designer or an app developer who only works on a project for a customer once before moving on to another one.                

To learn more about Professional network service refer to:

https://brainly.com/question/14718907

#SPJ4

Chapter 5 described an atomic attribute as one that cannot be further subdivided. Such an attribute is said to portray atomicity. Outline all the benefits gained from ensuring atomicity in database design. Provide an example of a database design scenario in which atomicity ensures the integrity and flexibility of the database system.

Answers

An example of a database design scenario in which atomicity ensures the integrity and flexibility of the database system is transfer of money between two bank accounts.

How is atomicity explained?

Atomicity is one of the ACID properties of Transactions that must be enforced by the DBMS's concurrency control and recovery methods. Atomicity requires that we execute a transaction to completion, which means that the transaction is either completely executed or not executed at all.

If the transaction fails to complete for any reason, such as a system crash in the middle of transaction execution, the recovery technique must undo any transaction-related effects on the database. Money transfer between two bank accounts is an example of where atomicity is required. If money is deducted from account A, it must be credited to account B, or the entire transaction must be reversed.

Learn more about database on:

https://brainly.com/question/518894

#SPJ1

question 107the touch screen on a mobile device is not responding to input. which of the following is the best step to take to resolve this issue?

Answers

The number of televisions per capital is calculated by dividing the number of television sets by the total US population. In this case, we divide the 285 million television sets by the population of 298.4 million.

What is use of televisison?

This gives a result of 0.9551 televisions per capita. Note that this method (dividing the number by the population) also is used for calculating the per capita of many other things like GDP.

In this case, we divide the 285 million television sets by the population of 298.4 million. This gives a result of 0.9551 televisions per capita.

Therefore, The number of televisions per capital is calculated by dividing the number of television sets by the total US population. In this case, we divide the 285 million television sets by the population of 298.4 million.

Learn more about television on:

brainly.com/question/16925988

#SPJ1

40 points to answer all four questions each in 2- 4 sentances minimum

1. What are some challenges that photographers face when trying to take a great image? What can they do to overcome these challenges?

2. What are some elements that separate good images from great images? How have you used these elements in your photography practice to create great images?
3. What purposes can photographers have for taking photographs? Select one purpose and describe a photograph that MOST LIKELY would be taken to meet that purpose.
4. In photography, what does it mean to capture images with your audience in mind? How have you taken photographs while keeping your audience in mind?

Answers

1. Some challenges that photographers face when trying to take a great image include:

Short Windows of Time for the Best Light · Capturing a Scene as it Appears to the Eye

2. Some elements that separate good images from great images include:

Light.Subject.Composition

3. The purposes that photographers have for taking photographs include:

Memorial.Communicative:Creative

4. To capture images with your audience in mind simply means to have the emotions and feelings of the audience in mind.

What is photography about?

Photographs are important in everyone's life because they connect us to our past and remind us of people, places, feelings, and stories from our past. They can assist us in determining who we are.

When we talk about capturing the moment in photography, we're really referring to the photo's feeling, emotion, vibe, or atmosphere. That comes from more than just the subjects or the surroundings; it also comes from the photographer.

Learn more about photograph on:

https://brainly.com/question/25821700

#SPJ1

computing is designing, manufacturing, using, and disposing of electronic products in ways that are friendly to both people and the environment. chemicals are released into the air or groundwater and soil when e-waste is burned or buried. can reduce the environmental impact of electronic waste and ultimately reduce costs. consists of discarded computers, cell phones, televisions, stereos, and the electronics from automobiles and appliances.

Answers

The ecologically friendly and ethical use of computers and their resources is known as "green computing."

It is also described as the study of creating, utilizing, disposing of, and engineering computing equipment in a way that minimizes their environmental impact. Green computing is a method for using computing resources more effectively while also reducing technological waste and electricity consumption. The use of computers and other electronic devices is growing, as is the amount of energy used and the carbon footprint. One is to buy items that have EPEAT certification, which is an environmental rating system for electronic goods. An additional option is to recycle or donate old electronics rather than just throwing them away.

Learn more about system here-

https://brainly.com/question/13992507

#SPJ4

rq 12-4. what is a pre-requisite/co-requisite relationship of product maintenance and fix releases? g

Answers

When maintenance and fixes must be performed concurrently in order for a product to remain effective, this is known as a pre-requisite/co-requisite relationship.

Describe maintenance.

In terms of industrial, commercial, and residential installations, maintenance technically refers to functional inspections, servicing, repairing, or replacing necessary machinery, equipment, and investing in infrastructure. This has evolved over time to encompass varied language that describes different cost-effective maintenance procedures to keep equipment operating; these operations actually occur either before or after a failure. Maintenance is linked primarily to the product or technological system's usage phase, during which the maintainability idea must be taken into account. In this situation, maintainability is understood to be an object's ability to business produces under specified .

To know more about maintenance
https://brainly.com/question/13257907
#SPJ4

c. a new shopping mall has obtained an ipv4 network address, 205.72.16.0 /24. management of the shopping mall would like to create 6 subnets with each subnet serving 32 hosts. could it be done? demonstrate the reason with numbers. (10 points)

Answers

The broadcast address of the 16 subnet, where this host is located, is 23, and the range of acceptable hosts is 17–22.

This indicates that a "/16" leaves the final 16 bits (or final two integers) available for usage in specified addresses and a "/8" leaves the final 24 bits available for use. Here are all of the possible addresses for each, for further clarification: 10.0.0.0/24: contains ranges 10.0.0.1–10.0.0.254 (Can give the most recent number) Therefore, a device with the IP address 192.168.1.200/24 would belong to the same network. And because the subnet mask is /24, the full last octet—28 = 256 - 2 = 254 valid addresses—can be utilized to define the host machine.

Learn more about network here-

https://brainly.com/question/13992507

#SPJ4

Practice 1) Several people are standing in a row and need to be divided into
two teams. The first person goes into team 1, the second goes into team 2, the third goes
into team 1 again, the fourth into team 2, and so on.
Write a method that takes an array of positive integers (the weights of the people) and
return an array of two integers, where the first element is the total weight of team 1, and
the second element is the total weight of team 2 after the division is complete.
Make sure your method throws appropriate exceptions. Also test your method with a few
test cases in the main method.
Java

Answers

Java program with function calls and list return. An image of the code and output of the algorithm is attached.

Java Code

import java.util.ArrayList;

import java.util.Scanner;

public class Main {

  public static void main(String[] args) {

     ArrayList<Integer> total_weight = new ArrayList();

     ArrayList<Integer> weight = new ArrayList();

     int N;

     double media;

  // Number of people in row

     N = Numberofpeople();

 // Function to divide the people into two team

     dividedintotwoteams(total_weight,weight, N);

 // Output

     System.out.println("Total weight of team 1 y 2: "+total_weight);

  }

  public static int Numberofpeople() {

     Scanner sc = new Scanner(System.in);

     int n;

 System.out.println("****Divide people into two teams****  ");

 System.out.println("---------------------------------  ");

 System.out.print("Number of people in row: ");

 n = sc.nextInt();

 return n;

  }

public static void dividedintotwoteams(ArrayList<Integer> total_weight, ArrayList<Integer> weight, int n) {

    Scanner sc = new Scanner(System.in);

// Define variables

 int team1, team2, x;

 team1 = 0;

 team2 = 0;

 int w;

 for (x=1;x<=n;x++) {

  System.out.print(x+" person weights: ");

  do {

       w = sc.nextInt();

  } while (w<=0);

  weight.add(w); //add weight to ArrayList

  if (x%2!=0) {

   team1 = team1+w;

  } else {

   team2 = team2+w;

  }

 }

 total_weight.add(team1);

 total_weight.add(team2);

}

}

To learn more about list and functions in java see: https://brainly.com/question/18554491

#SPJ4

FILL IN THE BLANK. _____ refers to the process of combining aspects of reporting, data exploration and ad hoc queries, and sophisticated data modeling and analysis.

Answers

Answer:  Business intelligence

Explanation:

traffic intensity is a very useful measure of: group of answer choices whether the system is stable or not the distribution of interarrival times the number of customers in a system the amount of congestion in the system

Answers

All of the above-mentioned are accurate answers as traffic intensity is a measure of network traffic conditions . The distribution of interarrival times the number of customers, system stability, and system congestion are all measured by the traffic intensity.

In order to describe network congestion or other degraded network situations, the level of network traffic is gauged by traffic intensity. When determined, traffic intensity—also known as the traffic intensity factor—describes the state of a packet-switched network, such as one that carries TCP traffic.

The traffic intensity factor a relative measure, takes into account the average packet size, arrival rate, and available network transmission speeds. It can be calculated using the formula below:

The equation for the Traffic intensity factor is:

Traffic intensity factor = La/R

where a = average packet arrival rate; L = average packet size; R = transmission rate.

The Traffic Intensity Factor can be used to guide rate-limiting algorithms, error prediction, and probing for network delays.

To learn more about network traffic click here:

brainly.com/question/9392514

#SPJ4

which methods are in the serializable interface. you may need to select more than one answer. group of answer choices readfrom read writeto write there are no methods in the serializable interface

Answers

The ObjectOutputStream and ObjectInputStream classes can perform this task using the writeObject and readObject methods; Serializable lacks these methods.

The ObjectOutputStream and ObjectInputStream classes can perform this task using the write Object and read Object methods; Serializable lacks these methods. Serializable is merely a marker interface; it doesn't call for any fields or methods; it simply sets a flag. A marker interface called Serializable merely informs JVM that a specific object is set to be serialized. Internally, the serialization process takes place.

interface that is serializable. No state from classes that don't implement this interface will be serialized or desterilized. A class that can be serialized has all of its subtypes be serializable. The only purpose of the serialization interface, which has no methods or fields, is to define the semantics of being serializable.

To know more about serializable click here:

https://brainly.com/question/13326134

#SPJ4

Crisha is configuring File History for the first time on her computer. She attaches an external hard drive and onfigures it as the drive for File History. Vhich of the following is most likely to occur in this scenario? a. Trisha will have to specify a folder that is not at the root of the drive for backup. b. Backup data will be added to the free space on the hard drive. c. The hard drive will be formatted before being used by File History d. Any files on the hard drive will be overwritten by backup files and folders.

Answers

Tap Search after sliding in from the right edge of the screen. In the search box, File History settings. Choose the network or external device you want to use by selecting Select a drive. Activate File History.

The $OF contains files whose pathnames are too long to be kept on your backup device, according to this answer on answer.microsoft.com. Additionally, File History is still the program Microsoft advises using for file backups even though Backup and Restore is a feature of Windows 10 itself. In stark contrast to Backup and Restore, File History's main function is to enable you to back up individual files rather than producing a full system image.

Learn more about program here-

https://brainly.com/question/14618533

#SPJ4

the receiver question 18 options: encodes the symbols to interpret the meaning of the message. transmits the symbols to interpret the meaning of the message. decodes the symbols to interpret the meaning of the message. responds to the symbols to interpret the meaning of the message. must ignore the symbols to interpret the meaning of the message.

Answers

A message is encoded by the sender, who then sends it. (3) The message is decoded by the receiver.

The process by which the receiver interprets the symbols used by the message's source is known as decoding. He is the recipient of the communication from the sender. Feedback: Feedback is any behavior by the recipient that shows he has heard and understood the sender's message. The process through which information is conveyed and comprehended by two or more individuals is referred to as communication. Effective communication is about conveying the sender's intended message. The receiver's job is to accurately translate the sender's message, both verbal and nonverbal, into their own language. Decoding is the process of understanding the message.

Learn more about communication here-

https://brainly.com/question/18825060

#SPJ4

write an assembly program that has a macro maximumthat finds the larger of two numbers inputted by the user

Answers

By converting combinations of mnemonics and syntax for operations and addressing modes into their numerical representations, an assembler program generates object code.

What is assembler program?

The majority of the statements or instructions in assembly language are mnemonic processor instructions or data. It is created by compiling the source code of high-level languages like C and C++. Assembly Language aids in program optimization.

.586

.MODEL FLAT

INCLUDE io.h

.STACK 4096

.DATA

value1 DWORD ?

value2 DWORD ?

"Enter the initial number," prompt1 BYTE, 0

"Enter the second number," prompt2 BYTE, 0

string BYTE 40 DUP (?)

resultLbl BYTE  "The maximum value you entered was:", 0

.CODE

_MainProc PROC      

input prompt1, string, 40       ;get user input value1

atod string                     ;convert input (ASCII) to integer

mov ebx, eax

input prompt2, string, 40   ; repeat for value2

atod string

mov value2, eax

cmp eax, ebx                ;compare user inputs

jg greater_than     ;jump conditional if value 1 is greater then value 2

   greater_than:   ;condition if greater than ouput

       dtoa value1, eax                    ;decimal to ASC for output of

integer value stored at ebx

       output  resultLbl, value1           ;output value 1

           jmp exit                    

   less_than:  ;condition if less than ouput

       dtoa value1, eax

       output  resultLbl, value2           ;else output value 2    

           jmp exit

   exit:   ;quit jump              ;end if/else conditional

   mov eax, 0          ;clear memory

   mov ebx, 0

   ret

_MainProc ENDP

END

assemblyx86

The complete question is

Simple assembly program to spit out the greater of two user input numbers. I am having trouble getting the output correct. Example if I entered 45 and 55, the maximum value would be 55, however when I try the reverse 55 and 45 (the answer should still be 55) I get 45. It would appear that this program only ever outputs the second value entered and stored at EAX. Any help is greatly appreciated.

To learn more about assembler program refer to:

https://brainly.com/question/13171889

#SPJ4

; Set up input/output

movlw 0x00

movwf TRISA

movlw 0x00

movwf TRISB

; Define MAXIMUM macro

MAXIMUM MACRO num1, num2

   movf num1, W

   subwf num2, W

   btfsc STATUS, C

   movf num2, W

   movwf num1

   ENDM

; Main program

main:

   ; Prompt user to enter first number

   movlw 0x31

   call putch

   call getch

   movwf num1

   ; Prompt user to enter second number

   movlw 0x32

   call putch

   call getch

   movwf num2

   ; Find and display larger number

   MAXIMUM num1, num2

   call putch

   ; Repeat

   goto main

if you need to confiscate a pc from a suspected attacker who does not work for your organization, what legal avenue is most appropriate?

Answers

The most appropriate legal avenue would be to contact law enforcement and file a criminal complaint. Depending on the jurisdiction, law enforcement may be able to obtain a warrant to seize the computer.

This is the most appropriate approach since it is the only way to ensure that the legal process is followed, and the computer can be used as evidence in a criminal case.

The importance of following due process when seizing a computer from an attacker not associated with the organization

In the world of information technology, information theft and security breaches are increasingly common realities. As a result, many organizations have been forced to seize computers to recover information or to prevent future attacks. However, this action must be done in accordance with the law.

The seizure of a computer from an attacker not associated with the organization must follow the established legal process. This means that the organization must notify the police and file a criminal complaint. Depending on the jurisdiction, the police may obtain a court order to seize the computer.

Learn more about the legal process:

https://brainly.com/question/8618918

#SPJ4

what chage command should you enter at the command prompt to set the password for jsmith to expire after 60 days and give a warning 10 days before it expires?

Answers

chage -M 60 -W 10 jsmith Forces jsmith to keep the password 60 days before changing it and gives a warning 10 days before changing it.

Which command should you enter to establish a user account's expiration date?

The "chage" command is used to edit the user's account's password expiration date. It allows you to change the expiration date's current status, set an expiration date to lock the account, toggle between active and passive status, and receive notifications days before the account expires.

What is the Linux chage command?

The tool to "update user password expiry information" is what the chage command calls itself. The chage man page states: The chage command modifies the last password change date as well as the number of days between password updates.

For additional information on the chage command, see

brainly.com/question/13084023

#SPJ4

Enter a function in cell H12, based on the payment and loan details, that calculates the amount of cumulative principal paid on the first payment. Be sure to use the appropriate absolute, relative, or mixed cell references.
Facility Amortization Table 4 Loan Details Payment Details 6 Payment 7 APR 8 Years 9 Pmts per Year 10 $4,972.00 3.25% Loan Periodic Rate # of Payments $275,000.00 0.271% 60 12 Beginning Payment Principal RemainingCumulative Cumulative Payment Number Interest Principal Balance Amount Interest PaidRepayment Balance $275,000.00 $4,972.00 ($89.89) 12 13 14 15 16 17 18 19 20 21 4 6 10 23 24 25 26 27 28 12 13 14 15 16 17

Answers

In order to execute the above task successfully on Microsoft Excel, that is, calculating the Cumulative Principal paid, you must use the CUMPRINC function in excel which is given as: =CUMPRINC(rate, nper, pv, start_period, end_period, type)

How does the CUMPRINC function work?

It is to be noted that the CUMPRINC function employs the following logic:

Rate (necessary argument) - The interest rate per period.NPER (necessary argument) - The total number of payment periods required to repay the loan or investment.PV (mandatory parameter) - This is the loan/present investment's current value.Start_period (mandatory parameter) - The number of the beginning period to compute interest over. It must be an integer between 1 and the NPER given.End_period (mandatory parameter) - The final period over which interest should be calculated. It must be an integer ranging from 1 to the given NPER. Type (Mandatory parameter) -  This defines when the payment will be made. It might be either 0 or 1. It is an integer that indicates whether the payment is made at the beginning of the period (0) or at the end of the period (1).

In the above case,

Rate = 3.25%

NPER = 17
PV = $275,000
Start_Period = 1
End_Period is 60
Type = 0

Learn more about Microsoft Excel Functions:
https://brainly.com/question/17960032
#SPJ1

the back cover of a mobile device is warmer than usual, and the battery seems to lose its charge much quicker than normal. the user has scanned for malware, closed unused apps, and decreased the brightness level of the screen, but the symptoms persist. which of the following is the most likely cause for this behavior?

Answers

The one that is most likely the cause for this behavior is the battery is going bad. The correct option is A.

What is a mobile phone?

The battery drains more quickly than usual, your internet usage jumps even though your surfing habits haven't altered, and your GPS feature or your internet are the most typical symptoms that a device has been compromised.

One of the main causes of dropped cellular calls on phones is weak cellular service. Verify there are at least two signal bars on your phone's status bar. You're probably far from the closest mobile tower if your phone has less than two signal bars.

Therefore, the correct option is A, The battery is going bad.

To learn more about the mobile phones, refer to the link:

https://brainly.com/question/15082114

#SPJ1

The question is incomplete. Your most probably complete question is given below:

The battery is going bad.

Disable the auto-brightness option

Connect to a Bluetooth speaker.

Security

Assume you have two lists named list1 and list2 that are of the same length. Create a dictionary in which the elements of list1 are the keys and the elements of list2 are the values. For example, the dictionary will have:an element in which list1[0] is the key and list2[0] is the value,an element in which list1[1] is the key and list2[1] is the value, and so on.

Answers

The solution to the above prompt with regard to the list named are:

A) dict1 = dict([(list1[i], list2[i]) for i in range(len(list1))])

B) dict1 = {}

for i in range(len(list1)) :

[Tab Key]dict1[list1[i]] = list2[i]

C)

dict1 = dict([(list1[i], list2[i]) for i in range(len(list2))])

What is a list in programming?

A list or sequence is an abstract data type in computer science that contains a finite number of ordered items, where a given value may appear more than once.

The usage of lists is another programming method that will be helpful to our algorithm development because many algorithms need the manipulation of sets of data. Similar to a variable, a list—also known as an array—is a tool for data storage.

Learn more about lists:
https://brainly.com/question/26352522
#SPJ1

sheryl is explaining the osi model to new technicians at her company. she is trying to explain what protocols operate at the various layers of the osi model. at what layer of the osi model does tcp operate?

Answers

The Transport layer of the OSI model operates the TCP protocol. Correct answer: letter A.

The Transport layer of the OSI model is responsible for providing reliable end-to-end communication between two hosts. So, it is responsible for ensuring delivery, data sequencing and error control.

What does the OSI model consist of?

The OSI model consists of seven layers:

Physical Layer: Responsible for transmitting raw data bits over physical medium such as cables, radio waves, etc.Data Link Layer: Responsible for formatting and transmitting data frames, which are packets of data that have an address header and trailer attached.Network Layer: Responsible for managing and routing data packets from one network to another.Transport Layer: Responsible for reliable end-to-end delivery of data packets.Session Layer: Responsible for establishing, managing, and terminating communication sessions between two or more computers.Presentation Layer: Responsible for translating, encrypting, and compressing data so that it can be sent across the network.Application Layer: Responsible for providing services to end users, such as web browsing and file transfer.

Sheryl is explaining the OSI model to new technicians at her company. She is trying to explain what protocols operate at the various layers of the OSI model. At what layer of the OSI model does TCP operate?

A. Transport

B. Application

C. Network

D. Data link

Learn more about the OSI model:

https://brainly.com/question/15901869

#SPJ4

Raphael does not know how to safely use a circular saw. Which is long-term consequence that could result?.

Answers

Being struck by fragments from the blade or material being cut poses a significant risk. The blade may projectiles if it is overly worn or damaged. The guard is either not present or is malfunctioning.

What long-term consequence of circular saw?

One of the most crucial aspects of circular saw maintenance is using the appropriate blade for the operation. The incorrect blade could break during the cut if you use it.

Cutting wood too slowly enables the spinning blade to make prolonged contact with the wood. Burn marks are generated by heat accumulation and contact between the blade and the wood. Fortunately, the answer to this particular burning issue is simple.

Therefore, Additionally, employing the incorrect circular saw blade type makes the tool work harder than it has to.

Learn more about circular saw here:

https://brainly.com/question/17157503

#SPJ1

Other Questions
In the first sentence of the third paragraph, the author describes needlework as "seemingly peculiarly adapted to the powers and tastes of women" primarily to what do you believe is the single most influential force in today's society that sets the tone for an individual's personal values and why? true or false: with a well-designed sample survery, the sample percentage is very likely to equl the population percentage This is troubleshooting a problem with her computer. She restarted it, checked the power source, and reconnected it to the internet successfully. Since none of these things have helped, what can she do next to try to find the solution to her problem? A. call a technician B. search on the internet C. delete all the files on the computer D. clear the computer of all programs we made a close study in class of an extraordinary japanese temple complex (depicted below) that is re-built, identically, at predictable intervals. what is the interval of reconstruction for that special temple complex that is so important to an understanding of japanese culture and architecture? 4. As a son/daughter, what does thetext make you realize? death of a salesman very often, failure to record a liability means failure to record a(n) a. revenue b. expense c. footnote d. asset what have the water-related discoveries (made by spacecraft at mars) implied about its atmosphere in the distant past? the intensive care nurse is contributing to the care of patient who has just been admitted with a presentation that is characteristic of shock. the nurse is providing constant assessment of numerous parameters but should know that a priority indicator of the patient's current status is: PLEASE HELP!!GIVE A LOT OF POINTS IF HELP!!!!!CAULATE IT PLEASEEEEEEEEEEEEEEEEEEE!!!!!!!!! GIVE BRAINLISTT!!HELP CUALATE THE SQUARE ROOT how do the hunger and satiety hormones respond to drastic caloric restriction and weight loss in overweight and obese individuals? Please help with this! what were the main features that distinguished the music of rock 'n' roll from the music that preceded it, especially that associated with tin pan alley? please help, i don't know what to do what are the factors that a business needs to keep in mind when preparing for growth? what are the indicators that a business is growing too fast? a nurse is teaching a client about preventing osteoporosis. which teaching point is correct? there are a number of important secretions and products made in the digestive tract. click and drag to define the following terms. esther is very stressed by her caregiving responsibilities and is dealing with it by attempting to hire some home health care. esther is using: What do you think of Twain's assertion that all of the "grace, the beauty and poetry" had gone out of the river once he learned its language? What does this tell us about this "language"? a) How many prime numbers are multiples of 5? b) How many prime numbers are multiples of 8?