If you analyze a carbon sample and discover that 6% of the carbon atoms have an atomic number greater than 12, you may safely assume that 6% of the sample is made up of carbon isotopes.
Carbon-12 (12 C), which has six neutrons in addition to its six protons, is by far the most common isotope of carbon. The following-heaviest isotope of carbon, carbon-13 (13 C), has seven neutrons. They are both referred to as stable isotopes since neither 12 C nor 13 C experience radioactive decay over time. The nuclear charge number (sign Z) of an atomic nucleus is the chemical element's atomic number. The proton number in regular nuclei is equivalent to this (np).
Learn more about atomic number here
https://brainly.com/question/16858932
#SPJ4
Identify the type of friction acting in each scenairo
A surfer rides an ocean wave is fluid friction
A bowling ball travels down a bowling lane rolling friction
A baseball flies through the air is air resistance
A hose rests on the edge of a truck is static friction.
What is friction?Friction is described as the force resisting the relative motion of solid surfaces, fluid layers, and material elements sliding against each other.
Static friction is that force that keeps an object at rest.
It is that friction experienced when individuals try to move a stationary object on a surface, without actually triggering any relative motion between the body and the surface on which it is on.
Learn more about friction at: https://brainly.com/question/24338873
#SPJ1
Complete question:
dentify the type of friction acting in each scenario.
A surfer rides an ocean wave.
A bowling ball travels down a bowling lane.
A baseball flies through the air.
A hose rests on the edge of a truck.
OPTIONS:
air resistance
fluid
rolling
sliding
static
which properties of a material are affected by a bonding type
[tex]\huge\underline{\red{A}\green{n}\blue{s}\purple{w}\pink{e}\orange{r} -»}[/tex]
Hardness, melting and boiling points, solubility, and conductivity.Explanation:
Hope it helps you~When converting between metric units, use the prefixes to help you determine the magnitude of a value. The prefix k indicates kilo, 1000g = 1kg.
A 25.0 kg iron weightlifting plate has a volume of 3180 cm^3 . What is the density of the iron plate in g/cm^3?
Express your answer in grams per cubic centimeter to three significant figures.
The density of the iron plate in g/cm³, given that it has a mass of 25.0 Kg and a volume of 3180 cm³ is 7.86 g/cm³
How do I determine the density of the iron plate?The density of a material is defined as the mass of the material per unit volume of the material. This is written as:
Density = mass / volume
Using the above formula, we can obtain the density of the iron plate as illustrated below:
Mass of iron plate = 25 Kg = 25 × 1000 = 25000 gVolume of iron plate = 3180 cm³Density of iron plate = ?Density = mass / volume
Density of iron plate = 25000 / 3180
Density of iron plate = 7.86 g/cm³
Thus, from the above calculation, we can conclude that the density of the iron plate is 7.86 g/cm³
Learn more about density:
https://brainly.com/question/952755
#SPJ1
assuming all are in the liquid phase, which of the following substances would you expect to be able to place the maximum number of drops of on the surface of the penny?
The material with the highest surface tension is the one that can hold the most drips on a penny. So, [tex]HF[/tex] is the correct answer.
It behaves as though its surface were an elastic membrane because of a liquid quality. The The strength of this membrane-like activity increases with a liquid's surface tension. Because of this, a liquid with a high surface tension will favor taking the shape of an object with a limited surface area. This explains why a high surface tension liquid develops into a more compact shape, allowing for the placement of more droplets on the coin, as opposed to a low surface tension liquid. In other words, the amount of droplets that can fit on a penny depends on the surface tension of the liquid.
A penny can hold the most drops on the substance with the highest surface tension. A liquid's surface's elastic tendency to reduce surface area is referred to as surface tension. As the most electronegative element, fluorine creates stronger hydrogen bonds, which contribute to higher surface tension.
To know more about surface tension:
brainly.com/question/28146435
#SPJ4
The complete question is:
On the surface of a penny, liquid droplets are put as part of an experiment. Assuming all are in the liquid phase, which of the following substances would you expect to be able to place the maximum number of drops of on the surface of the penny?
a) [tex]HF[/tex]
b) [tex]H_2O[/tex]
c) [tex]CH_3CH_2CHO[/tex]
d) [tex]CCl_4[/tex]
5. Explain the reactivity of the the elements in 2 groups of the periodic table
The reactivity of the elements in group 2 would increase down the group.
What is the reactivity?We have to note that when we are talking about the reactivity of the elements we are looking at how easiliy the elements are able to engage in the process of chemical combination.
For the group two elements, they are highly reactive but not as reactive as the elements that we can find in group 1. The reactivity of the element is that are in group 2 would increase as we move down the group of the elements.
Learn more about reactivity:https://brainly.com/question/1598581
#SPJ1
Below is the amino acid histidine at pH 7. Select all the atoms that are part of a plane of three or more atoms.
Histidine was unique among amino acids in that it could exist in neutral or positively charged states inside the functional pH range of 5.0 to 7.0.
As a result, histidine may interact with the other aromatic residues and establish hydrogen bonds between polar but also charged residues.
Histidine seems to be a semi-essential amino acid (which children should get from food) that's also required in humans for growth as well as tissue repair. It is also essential for the preservation of myelin sheaths which protect nerve fibers and therefore is metabolized towards the neurotransmitter histamine.
Histamines perform a variety of roles in immune function, gastrointestinal secretion, as well as sexual function. Histidine too is essential for the production of blood cells and protects tissues from harm due to radiation as well as heavy metals.
Thus, the correct answer is (B)
The question is incomplete, the complete question is :
Below is the amino acid histidine at pH 7. Select all the atoms that are part of a plane of three or more atoms.
To know more about Histidine
https://brainly.com/question/29718665
#SPJ4
The equilibrium constant for the reaction represented by the equation below is greater than 1.0. Which of the following gives the correct relative strengths of the acids and bases in the reaction?H2PO4− + HBO32− ⇄ HPO42− + H2BO3−Acids BasesA.H2PO4− > H2BO3− and HBO32− > HPO42− B.H2BO3− > H2PO4− and HBO32¯ > HPO42− C.H2PO4− > H2BO3− and HPO42− > HBO32− D.H2BO3− > H2PO4− and HPO42− > HBO32− E.H2PO4− = H2BO3− and HPO42− = HBO32−
Giving the right relative importance of the bases and acids used in the reaction is H2PO4 > H2BO3 and HBO32 > HPO42.
What are acids, exactly?A chemical that produces salts and release hydronium ions into water when it reacts with any of these metals. Acids have one sour taste and give some colours a reddish tint. Chemicals taste acidic whenever dissolved in water and conduct electricity, and combine with metals to produce oxygen and hydrogen. Litmus is one indicator compound that can be used to identify acids. Acids cause the blue litmus material to turn red. One type of acid is sodium hydroxide.
Which one has the strongest acid?For example, pure sulfuric acid has a shocking pH of -12 while nitric acid has a pH of 1.08 and bleach has a pH of 1.6. So, the strongest "regular" acid you will encounter is weakly acidic.
To know more about acid visit:
https://brainly.com/question/29796621
#SPJ4
Help with beers law please I will rate brainliest
Answer:
Beer's law (sometimes called the Beer-Lambert law) states that the absorbance is proportional to the path length, b, through the sample and the concentration of the absorbing species, c: A α b · c. The proportionality constant is sometimes given the symbol a, giving Beer's law an alphabetic look: A = a · b · c.
Explanation:
I found some useful info for you. Hope it helps! Great to be of service to you! ⚔
for the following chair conformations of 1,3-dibromocyclohexane, determine the orientations of the two substituents, and determine if the conformation is cis or trans.
The way the bonds are built will determine how they are oriented. Additionally, the relative orientation of bonds affects conformation. Dibromocyclohexane is used to study the conformation.
How can you tell whether a molecule is chiral or not?Having a few very notable exceptions, the general rule is that molecules with at least one stereocenter are chiral, while molecules with no stereocenters are achiral. In most circumstances, an easiest approach to determine whether a molecule is chiral or achiral is to seek for one or even more stereocenters.
What does cis in cyclohexane refer to?Two substituent groups inside the same plane are regarded to be the cis isomer of cyclohexane (either equatorial or axial). Cis-1-methyl-4-hydroxymethyl cyclohexane is cyclohexane with a methyl group in the axial plane (-CH3)also the hydroxyl group (-OH).
To know more about dibromocyclohexane visit:
https://brainly.com/question/14168127
#SPJ4
2Cl2 + O2 → 2Cl2O
How many of each type of bond are present in the reactants?
How many of each type of bond are present in the product?
Use the Bond Energy Table to find the total change in bond energy. (187 kJ/mol)
Is this reaction endothermic or exothermic? How do you know?
Answer:
endothermic reaction; need more info on the reactants to answer the other questions
Explanation:
Given the change in bond energy of 187 kJ/mol, you can determine whether the reaction is endothermic or exothermic. If the bond energy is positive, the reaction is endothermic, meaning it absorbs energy. If the bond energy is negative, the reaction is exothermic, meaning it releases energy. In this case, the bond energy is positive so it's an endothermic reaction.
How many moles of NaCl are there in 40.3 g of sodium chloride?
Please answer all the questions in the picture below
Thank you
Answer:
58.44277 gram
Explanation:
The flask contains 25 mL of an unknown diprotic acid aqueous solution that reacts in a 1:2 stochiometric ratio with NaOH. Titrate the solution with NaOH to determine the concentration of the acid.
The concentration of the acid (the analyte) is determined using the formula below:
Ca = * Cb * Vb / 2* VaWhat is a titration?
Titration is a method of quantitative chemical analysis used to determine the concentration of an unknown substance known as the analyte.
Titrants are created as standard solutions with established concentrations and volumes as reagents. To ascertain the concentration of an analyte, the titrant reacts with an analyte solution. The titration volume is the amount of titrant that interacted with the analyte.
The concentration of the acid (the analyte) is determined using the formula given below as follows:
Ca = * Cb * Vb / 2* Va
where;
Ca is the concentration of the acidCb is the concentration of the baseVb is the volume of the baseVa is the volume of the acid.Learn more about titration at: https://brainly.com/question/186765
#SPJ1
Determine the [OH−] , pH, and pOH of a solution with a [H+] of 0.0078 M at 25 °C. Determine the [H+] , pH, and pOH of a solution with an [OH−] of 0.0011 M at 25 °C. Determine the [H+] , [OH−] , and pOH of a solution with a pH of 7.77 at 25 °C. Determine the [H+] , [OH−] , and pH of a solution with a pOH of 2.15 at 25 °C.
a) The pH of the solution is 2.11
b) The pH of the solution is 2.96
c) The [H+] of the solution is 1.69 * 10^-8
d) The [OH−] of the solution is 7.1 * 10^-3
What is the pH?What we call the pH of the solution is the negative logarithm of the hydrogen ion concentration of the solution. In this case, we have been asked to obtain the pH of the solution at different points.
a) pH = -log (0.0078 )
= 2.11
pOH = 14 - 2.11 = 11.89
[OH−] = Antilog (-11.89)
= 1.3 * 10^-12
b) pH = -log (0.0011)
= 2.96
pOH = 14 - 2.96
= 11.04
[OH−] = Antilog (-11.04)
= 9.1 * 10^-12
c) [H+] = Antilog (-7.77)
= 1.69 * 10^-8
[OH−] = 1 * 10^-14/1.69 * 10^-8
= 5.9 * 10^-7
pOH = -log( 5.9 * 10^-7)
= 6.22
d) [OH−] = Antilog (-2.15)
= 7.1 * 10^-3
[H+] = 1 * 10^-14/ 7.1 * 10^-3
= 1.41 * 10^-12
pH = -log( 1.41 * 10^-12)
= 10.9
Learn more about pH:https://brainly.com/question/15289714
#SPJ1
how many moles are in 559 grams of Mg(CIO3)2
The number of moles which are in 559 grams of Mg(CIO3)2 is 2.92mol.
What is Mole?This is referred to as the unit of the quantity amount of substance and is also defined as a measure of how many elementary entities of a given substance are in an object or sample.
The formula is mole = mass/molar mass.
Mg(CIO3)2 has a molar mass of 191.20g/mol
Mole = 599/191.20 = 2.92mol.
Read more about Mole here https://brainly.com/question/15356425
#SPJ1
propose five combinations of aqueous ionic reagents that likely would form a precipitate when they are mixed
propose five combinations of aqueous ionic reagents that likely would form a precipitate when they are mixed NaCl + AgNO3 (aq) (aq) CaCl2 (aq) + Na3PO4 (aq) CuSO4 (aq).
+ Zn(NO3)2 BaCl2 (aq) + Na2SO4 (aq) (aq) KI + Pb(NO3)2 (aq) (aq) Silver chloride (AgCl) precipitates from sodium chloride (NaCl) and silver nitrate (AgNO3). Lead (II) nitrate (Pb(NO3)2) and potassium iodide (KI) combine to generate lead (II) iodide (PbI2). Copper (II) sulfate (CuSO4) and sodium hydroxide (NaOH) combine to generate copper (II) hydroxide (Cu(OH)2).Aluminum chloride (AlCl3) reacts with sodium hydroxide (NaOH) to generate aluminum hydroxide (Al(OH)3). Barium chloride (BaCl2) and sodium sulfate (Na2SO4) react to generate barium sulfate (BaSO4).and silver nitrate (AgNO3). Lead (II) nitrate (Pb(NO3)2) and potassium iodide (KI) combine to generate lead (II) iodide (PbI2). Copper (II) sulfate (CuSO4) and sodium hydroxide (NaOH) combine to generate copper (II) hydroxide .
learn more about Copper here:
https://brainly.com/question/13677872
#SPJ4
which of the following will not interfere with the reagent strip test for leukocytes? group of answer choices formaldehyde nitrite
Ascorbic acid will not interfere with the reagent strip test for leukocytes.
What is ascorbic acid?Ascorbic acid, often known as vitamin C, is an organic molecule that occurs naturally. It is a water-soluble vitamin that is necessary for the immune system to operate properly, for the skin to produce collagen, and for the body to absorb iron.
Why ascorbic acid does not interfere with reagent strip test for leukocytes?Because ascorbic acid cannot be detected by the test. Leukocyte reagent strip tests often involve the use of a particular chemical reagent, such as nitrofurantoin or esculin, which reacts with the enzymes contained in leukocytes to generate a noticeable color shift.
Ascorbic acid does not react with the reagent used in the test because it does not share the same chemical characteristics as leukocytes.
Which of the following factors will not interfere with the reagent strip test for leukocytes?
A) ascorbic acid
B) formaldehyde
C) nitrite
D) urinary protein level of 500 mg/dL
To know more about ascorbic acid, visit:
brainly.com/question/13961146
#SPJ4
Consider the reactant shown. Select all statements that correctly describe the reduction of this compound.
Reduction is an activity to reduce something. In chemistry there is also a reduction reaction that is related to the oxygen content of a substance.
When a reduction reaction occurs, the substance will experience an increase in electrons, making it more negative. The following are examples of reduction reactions that occur in everyday life:
Iron Ore ExtractionIn the extraction of iron oxide (iron ore) is reduced to remove the oxygen in it. This is done to obtain pure iron (Fe) with the help of carbon monoxide (CO) as a reducing agent.
Copper refining reactionCopper purification reaction using a voltaic cell. Where Cu2+ ions will undergo a reduction reaction with a reducing agent in the form of magnesium to produce a precipitate of pure copper (Cu). From the reaction it can be seen that Cu has increased by 2 electrons so that its charge becomes neutral.
Reaction of copper (II) oxide and magnesiumAccording to Chemical Equations, this reaction is a reaction between magnesium (Mg) powder and black copper (II) oxide (CuO) powder to produce pure copper (Cu) and white magnesium oxide (MgO) powder.
Learn more about reduction at
https://brainly.com/question/28813812.
#SPJ4
How many carbon atoms are in the following compound: Barium Carbonate?
The chemical compound Barium Carbonate (BaCO3) is composed of one Barium atom (Ba), one Carbon atom (C) and three Oxygen atoms (O3). Therefore, the number of carbon atoms in Barium Carbonate is 1.
The compound Barium Carbonate has 1 carbon atom.
The chemical formula for Barium Carbonate is BaCO3, which means it contains 1 atom of Barium (Ba), 1 atom of Carbon (C), and 3 atoms of Oxygen (O). Therefore, the compound Barium Carbonate has 1 carbon atom.
For more information on Carbon atoms in Barium Carbonate:
https://brainly.com/question/29822909
for each of the following compounds, draw in all h atoms, label each unique h atom(s) that would give a distinct signal in 1h nmr (e.g. ha, hb, etc.), then indicate the expected multiplicity of signals from each proton signal.
When a proton is coupled to two different neighboring proton sets with identical or very close coupling constants.
Define unique atoms?
The atomic number (Z) of an element is the number of protons in the nucleus of each atom of that element. This means that the number of protons is the characteristic which makes each element unique compared to all other elements.Carbon atoms are unique because they can bond together to form very long, durable chains that can have branches or rings of various sizes and often contain thousands of carbon atoms. Silicon and a few other elements can form similar chains; but they are generally shorter, and much less durable.One chemist, John Dalton, suggested that these elements were made up of atoms and that the atoms of an element are all the same. This simple model could explain the millions of different materials around us. There are more than 109 different types of atom - one for each element.To learn more about atoms refers to:
https://brainly.com/question/17545314
#SPJ4
Briefly explain why ethanol (C2H6O), an alcohol has a much higher boiling point than dimethyl ether (C2H60).
Ethanol (C2H6O), an alcohol has a much higher boiling point than dimethyl ether (C2H60) because hydrogen bonds found in the former are typically much stronger attractions than ordinary dipole moments in the latter.
What is Boiling point?
This is referred to as the temperature at which the vapor pressure of a liquid equals the pressure surrounding the liquid and the liquid changes into a vapor.
Ethanol (C2H6O), an alcohol has a much higher boiling point than dimethyl ether (C2H60) because hydrogen bonds have a stronger attraction which makes it more difficult for the atoms to be broken down hence the reason why the boiling point will be higher in this scenario.
Read more about Boiling point here https://brainly.com/question/24675373
#SPJ1
02 Question (6 points) 1st attempt IH See Periodic Table Name and define the four quantum numbers that identify the highest energy electron in a francium; Fr, atomic orbital; Symbol Value Principal quantum number Ancular momentum quantum number Magnetic quantum number Spin magnetic quantum number
The four quantum numbers that identify the highest energy electron in a francium, fr, atomic orbital are n, ℓ, m, and s.
Which four quantum numbers are there?The energy levels of an atom are connected by a set of quantum numbers. The entire and singular quantum state of a single electron in an atom, also known as its wave function or orbital, is described and explained by the four quantum numbers, n, l, m, and s. Accordingly, the four quantum numbers are n, l, m, and s.
The quantum number is used to define the location of electrons, and an orbital is a place inside the atom where an electron can be found. The quantum number of the shell orbitals of an atom depends on the number of electron shells it contains.
Learn more about quantum here: brainly.com/question/5927165
#SPJ4
Why is there no reaction if you remove mercury oxide,HgO from the reaction?
The reaction stops because the reaction is a decomposition reaction.
What is a reaction?We have to note that there is a reaction when there is change of the reactants that are in the system to the products. We have to note that in this case. we have the decomposition of the mercury oxide.
Since it is a decomposition reaction, we can see that there is a break down of the mercury oxide to give rise to the oxygen and to the mercury as such if we remove the mercury oxide the reaction stops.
Learn more about reaction:https://brainly.com/question/28984750
#SPJ1
A sample of gold has a mass of 23.82
The volume of the gold sample, given the theoretical density and the mass, is 1.23 ml
How to find the volume ?When given the theoretical density of a gold sample and the mass, you can use the formula for density to find the volume of the gold sample.
The volume for density is:
Density = Mass / Volume
Mass = 23. 82 g
Density = 19. 30 g / ml
The volume is:
19.30 = 23 .82 / Volume
Volume x 19. 30 = 23. 82
Volume = 23. 82 / 19. 30
= 1.23 ml
Find out more on volume at https://brainly.com/question/28717703
#SPJ1
The full question is:
A sample of gold has a mass of 23.82 g, given that the theoretical density is 19.30 g/ml, what is the volume of the gold sample?
FILL IN THE BLANK. A __ reaction is a process in which a covalent or ionic bond is broken or formed.
A chemical reaction is a process in which a covalent or ionic bond is broken or formed.
A chemical reaction is a process that converts one or more compounds, known as reactants, to one or more distinct substances, known as products. Chemical elements or compounds are examples of substances.
A chemical reaction equation specifies the reactants and products, whereas a balanced chemical reaction equation specifies the reactants and products' mole relationships. The quantity of energy involved in the reaction is frequently mentioned. Reaction stoichiometry is the study of the quantitative aspects of chemical processes.
Synthesis (anabolic), decomposition (catabolic), and exchange are the t
Three primary types of chemical reactions involved in human physiology.
For more information on chemical reactions kindly visit to
https://brainly.com/question/29039149
#SPJ4
Help on 1.15 please!!
In this case, multiplying 0.35 by 55 gives us the number 19. 25.2 m squared plus three squares is a match. This is equivalent to the third square of 20 by 25.4.
What is significant numbers?We will use the least number of decimal places for addition and subtraction of important values supplied 20 0.9 kg minus 12.90 kg divided by 10 liters thus far. So there are two decimal places in this. Then, 8.0 kg divided by 100 gallons will equal 20.99 install 0.90 sequel to eight point and apologize. Therefore, take note that the least amount of significance you have is three significant numbers. As a result, this is likewise equivalent to 0.8 kg each item. We need to divide 45.82 g by three cm, 0.64 g by 0.859 cm, and 0.64 g by three cm for a letter B. Therefore, we must first solve for the parenthesis in this case. so 27 cm divided by 45.82 g. Q.divided by 0.634 cm, my nose weighs 0.64 g. Do the math with two. The division is then distributed when we are ready to resolve it. This therefore amounts to 1.7 g per centimeter. We have 1.7 gram cm Q divided by two, or Q miners 6.0 times 10 to the negative three g per centimeter cube. This is the same as 0.9 grams per centimeter. Finally, we have 0.35 m times 1.5 m, or the final 25.2 m squared, for literacy. In this case, multiplying 0.35 by 55 gives us the number 19. 25.2 m squared plus three squares is a match. This is equivalent to the third square of 20 by 25.4.To learn more about significant numbers refer to:
https://brainly.com/question/24491627
#SPJ1
Why do elements not have a numerical value for standard heats of formation and Free energies of formation but do have a numerical value for standard molar entropies?
Because it takes no energy to generate a naturally occurring compound, the enthalpy of formation for an element in its elemental state will always be 0.
What do you mean by formation standard free energies?The free energy shift that happens when 1 mole of a material is created from its component elements in their standard states is referred to as the standard free energy of formation. The standard free energy of production of a pure element in its standard state is zero.
The distinction between Gibbs free energy and standard free energy is that the former is dependent on the experimental circumstances, whilst the latter describes the Gibbs free energy for reactants and products in their standard state.
learn more about standard free energy
https://brainly.com/question/14415025
#SPJ1
a student places a drop of food coloring into two water samples. her observations are shown in the table. which statement best explains the observations in the table? (1 point)
The statement that best explains the observations in the table is - the water molecules of sample 1 are moving faster.
The temperature has an influence on the molecules of water. An increase in temperature is can make the water molecules to have more energy and therefore move at a faster rate.
When this happens the water molecules are said to move far apart and there will be an increase in the volume of water.
When water is heated, it has the tendency to expand and increase in volume, thereby becoming less dense.
The food coloring will spread into the water molecules by the phenomenon of diffusion. In hot water, food coloring will diffuse faster.
To know more about food coloring here
https://brainly.com/question/18706707
#SPJ4
energy an ecosystem, whereas chemical elements . answer unselected is burned in; are wasted unselected flows through; cycle within it unselected is lost in; are created unselected cannot be created nor destroyed in; disappear unselected is recycled in; flow through it unselected i don't know yet
In contrast to the worldwide recycling of chemical elements, energy travels via ecosystems.
An ecosystem is a region where a bubble of life is created by plants, animals, and other organisms interacting with the weather, environment, and other factors. Abiotic variables, or nonliving components, coexist with biotic components in ecosystems.
The food chain and food web are used to transfer energy. Plants, who are the primary energy providers in the ecosystem, use their chloroplasts to collect sunlight, which is then partially converted into chemical energy during photosynthesis.
Joules or calories are used to measure the energy input, or the energy that enters the environment. As a result, the energy flow is sometimes referred to as the calorific flow.
To know about ecosystem
https://brainly.com/question/13979184
#SPJ4
WILL MAKE BRAINLIEST!! Show steps!
1.) A chemist needs to prepare 4.00 L of a 0.50 M solution of potassium permanganate (KMnO4). What mass of KMnO4 does she need to make the solution? This problem is similar to Sample Problem 16.3.
Show your work (4 Points) (Answer: 316.08 g)
2.) What volume of a 1.50 M solution of KCl needs to be diluted in order to prepare 2.40 L of a 0.0750 M solution? This problem is similar to Sample Problem 16.4. Show your work. (4Points) (Answer: 0.12 L)
3.) Determine the molality of a solution prepared by dissolving 20 g of sodium chloride (NaCl) in 150. g of water. This problem is similar to Sample Problem 16.5. Show your work. (4 Points) (Answer: 2.3 mol/Kg)
1.) Chemist needs 79.02 g of KMnO4 to make 4.00 L of a 0.50 M solution. 2.) You will need to use 0.12 L of 1.50 M solution to make 2.40 L of 0.0750 M solution. 3.) Solution has a molality of 0.00229 mol/kg.
What is molality?Molality is defined as a measure of number of moles of solute in a solution corresponding to 1 kg or 1000 g of solvent.
1.) As, mass = moles x molar mass
Molar mass of KMnO4 is 158.03 g/mol
So, mass = 0.50 mol x 158.03 g/mol = 79.02 g
Therefore, the chemist needs 79.02 g of KMnO4 to make 4.00 L of a 0.50 M solution.
2.)As , C1V1 = C2V2
Here C1 is initial concentration, V1 is initial volume, C2 is final concentration and V2 is the final volume.
1.50 M x V1 = 0.0750 M x 2.40 L
Now, V1 = (0.0750 M x 2.40 L) / 1.50 M
So, V1 = 0.12 L
You will need to use 0.12 L of the 1.50 M solution to make 2.40 L of the 0.0750 M solution.
3.) Formula for molality is: m = (moles of solute) / (kg of solvent)
As, moles = (mass of solute) / (molar mass of solute)
= (20 g) / (58.44 g/mol) = 0.344 mol
m = (0.344 mol) / (150 g / 1000 g/kg) = 0.00229 mol/kg
So, the solution has a molality of 0.00229 mol/kg.
To know more about molality, refer
https://brainly.com/question/1370684
#SPJ1
What is the formula for iron(II) phosphide?
(Fe2P)
The formula for iron(II) phosphide is Fe₂P.
What is a Chemical formula?This is a term used in chemistry which is used to identify each constituent element by its chemical symbol and indicates the proportionate number of atoms of each element.
In this scenario, the chemical compound of iron and phosphorus, with a formula of Fe₂P and it has a physical appearance is grey, hexagonal needles which is formed from the reaction between the elements Iron and phosphorus at an elevated or high temperature and the product which is formed is a phosphorylated molecule thereby making it the most correct choice.
Read more about Iron phosphide here https://brainly.com/question/1995376
#SPJ1