Answer:
1. Ferric sulfate - Fe2(SO4)3
2. Strontium oxalate – SrC2O4
3. Chromic acid – CrO3
4. Nickel (III) carbonate – NiCO3
5. Silver bromate – AgBrO3
6. Dinitrogen difluoride - N2H2
7. Magnesium molybdate – MgMoO4
8. Sodium hydrogen phosphate - Na2PO4
A 136 g sample of an unknown substance was heated from 20.0 °C to 40.0 °C. In the process the substance absorbed 2440 J of energy. What is the specific heat of the substance? Identify the substance among those listed in Table 2.
A. the specific heat is 0.897 J/g.C, The Substance is aluminum
B. the specific heat is -0.897 J/g.C, The Substance is aluminum
C. the specific heat is 4.184 J/g.C, The Substance is water
D. there's not enough information to determine which is the substance.
Answer:
Option A. The specific heat is 0.897 J/gºC, The Substance is aluminum.
Explanation:
We'll begin by calculating the change in temperature of the substance. This can be obtained as follow:
Initial temperature (T₁) = 20.0 °C
Final temperature (T₂) = 40.0 °C
Change in temperature (ΔT) =?
ΔT = T₂ – T₁
ΔT = 40 – 20
ΔT = 20 °C
Finally, we shall determine the specific heat capacity of the substance. This can be obtained as follow:
Mass (M) = 136 g
Change in temperature (ΔT) = 20 °C
Heat (Q) absorbed = 2440 J
Specific heat capacity (C) =?
Q = MCΔT
2440 = 136 × C × 20
2440 = 2720 × C
Divide both side by 2720
C = 2440 / 2720
C = 0.897 J/gºC
Comparing the specific heat capacity (i.e 0.897 J/gºC) of the substance with those in the table above, the substance is Aluminum.
Thus, option A gives the correct answer to the question.
A chemical bond formed when two atoms share three pairs of electrons is a ________ bond; it is best described as ________.
Answer:
Explanation:
A chemical bond formed when two atoms share three pairs of electrons is a triple bond; it is best described as covalent.
Hydration of alkynes gives good yields of single compounds only with symmetrical or terminal alkynes. Draw the major organic product(s) formed when 3-methylcyclodecyne undergoes hydration in the presence of HgSO4 and H2SO4.
Answer:
Following are the solution to the given choice:
Explanation:
Hex-2-yne is just not alkyne symmetric, therefore two things respectively hexan-3-one and hexan-2-one are to be given.
The attached file it displayed the response along with the mechanism, please find the.
THIS NOT MY WORK. its for my sister. HELP HER
Answer:
Your answer will be b(molten material from the outer core makes its way to the surface of earth)
Explanation:
Answer:
C
Explanation:
I'm pretty sure molten material comes from the inner core. I think you can search up this though, try to find where molten material comes from. Goodluck!
About how long did it take for this population to reach the carrying capacity of this habitat
Answer:100
Explanation:
Which piece of glassware shown below is used to hold and dispense a solution of known concentration during a titration?
Answer:
Answer C
Explanation:
Got it off of q**zlet ;)
Answer
Its C confirmed
Explanation:
Just did the test
Look at the reaction below. Upper H subscript 2 upper S upper O subscript 4 (a q) plus upper C a (upper O upper H) subscript 2 (a q) right arrow upper C a upper S upper O subscript 4 (a q) plus 2 upper H subscript 2 upper O (l). Which substance is the base in the reaction? A. 2H2O (l) B. H2SO4 (aq) C. CaSO4 (aq) D. Ca(OH)2 (aq)
Answer:
Its D
Explanation:
Did it on edge
According to the reaction: H₂S0₄ + Ca(OH)₂ → CaSO₄+ 2H₂O, the base is Ca(OH)₂.
What is a base?Base is defined as a substance which can accept protons or any chemical compound that yields hydroxide ions (OH-) in solution.
Generally, base are substances that produces hydroxide ion when dissolve in water.
Base are substances that reacts with acid to produce salt and water. Example of base includes sodium hydroxide, potassium hydroxide, magnesium hydroxide, calcium hydroxide etc.
Therefore, according to the reaction:
H₂S0₄ + Ca(OH)₂ → CaSO₄+ 2H₂O
The base is Ca(OH)₂.
learn more on chemical reaction here: https://brainly.com/question/14575718
What will be produced at the cathode during the electrolysis of an aqueous solution of magnesium iodide, MgI2
Answer:
At the cathode during the electrolysis of an aqueous solution of magnesium iodide, MgI2 , 2I−(aq) is produced
Explanation:
At cathode, reduction reaction takes place.
The dissociation of MgI2 in aqueous solution is Mg2+(aq) and 2I−(aq)
Here, the Iodine reduces to 2I−(aq) from state of 0 (MgI2) to state of -1 (2I−(aq))
Hence, at the cathode during the electrolysis of an aqueous solution of magnesium iodide, MgI2 , 2I−(aq) is produced
Answer:
During electrolysis of an aqueous solution of magnesium iodide, MgI2 , 2I−(aq) is produced at the cathode
Explanation:
Electrolysis is a process whereby ionic compound is broken down or degraded into smaller substances when electric current flow through it.
During electrolysis of magnesium iodide, At the cathode reduction reaction occur .
MgI2 is dissociated to is Mg2+(aq) and 2I−(aq)
Then Iodine is reduced to 2I−(aq) which is 0 in (MgI2) then change to -1 (2I−(aq))
Therefore;
During electrolysis of an aqueous solution of magnesium iodide, MgI2 , 2I−(aq) is produced at the cathode.
PLEASE HELP ME!!!!
TRUE or FALSE: When sperm and egg cells combine in fertilization, the
offspring ends up with the same number of chromosomes as their
parents.
Answer: False
Explanation:
Hope this help
Answer:
True.
Explanation:
Every child will contain the same number of chromosomes as the parents (otherwise they wouldn't be considered the same species). Additionally, animals can only mate with a species containing the same number of chromosomes as themselves. This means if the offspring of the parents had a different number fo chromosomes the offspring would be unable to mate with animals of it's own species.
How do isotopes of the same atom react chemically? How do isotopes of the same atom compare in size?
Atoms of the same elements differing in the number of neutrons in their nuclei are known as isotopes. Thus, isotopes of an element have the same atomic number but different atomic mass number. Isotopes of an element have similar chemical properties but different physical properties.
Consider the reaction 4FeS2 + 11O2 → 2Fe2O3 + 8SO2. If 8 moles of FeS2 react with 15 moles of O2, what is the limiting reactant? (3 points)
SO2
O2
Fe2O3
FeS2
Answer:
O2
Explanation:
for find the limiting reactant you must calculate the moles of the reactants from the amount that you have and from the MM:
MM FeS2 = 120n = 26.2g / 120g/mol = 0,218 mol
MM O2 = 32n = 5,44g/32g/mol = 0,17 mol
The limiting reactant is
O2
Based on this chart, which of the following statements describes sources of
energy in the United States?
Sources of Energy
Petroleum
3796
Other
91%
Natural Gas
24%
Renewable
Energy
7%
Coal
2396
*Nuclear
Electric Power
8%
A. Most energy comes from nuclear power and renewable sources.
B. Most energy comes from nonrenewable energy sources.
C. Most energy comes from sources in the solid phase.
D. Most energy comes from greenhouse gases.
Answer:
B. Most energy comes from non-renewable sources
Explanation:
A P E X
In United States Most energy comes from non-renewable energy sources, as petroleum coal and others has the highest consumption in the given chart
What is the energy source in US?In the given chart, the energy consumption in US is based on Petroleum, coal and others the highest consumption pattern as compared to other energy sources
Hence, most energy in the US is from non-renewable energy sources
Learn about renewable energy sources.
https://brainly.com/question/4038933
#SPJ2
The MO diagram of CN is similar to N2. Based on the molecular orbital energy-level diagram of CN, which of the following statements are correct?
i. The CN bond order is 2.
ii. CN is diamagnetic.
iii. The bond enthalpy in CN- ion is higher than CN.
iv. CN has longer bond length than CN-
answer choices:
a. ii, iv
b. iii, iv
c. i, iii
d. i, ii
e. i, iv
Answer:
Nitrogen molecule (N2)
The electronic configuration of nitrogen (Z=7) = 1s2 2s2 2px12py12pz1.
The total number of electrons present in the nitrogen molecule (N2) is 14.
In order to maximize energy, these 14 electrons can be accommodated in the different molecular orbitals.
N2: KK'(σ2s)2 (σ*2s)2 (π2Px)2 (π2py)2 (σ2pz)2
Here (σ1s)2 (σ*1s)2 part of the configuration is abbreviated as KK’, which denotes the K shells of the two atoms. In calculating bond order, we can ignore KK’, as it includes two bonding and two antibonding electrons.
The bond order of N2can be calculated as follows:
Here, Nb = 10 and Na = 4
Bond order = (Nb−Na) /2
B.O = (10−4)/2
B.O = 3
So your answer should be C3.
Calculate the volume of 0.07216 M AgNO3 needed to react exactly with 0.3572 g of pure Na2CO3 to produce solid Ag2CO3.
Answer:
93.4 mL
Explanation:
Let's state the reaction:
2AgNO₃ + Na₂CO₃ → Ag₂CO₃ + 2NaNO₃
We determine the moles of sodium carbonate:
0.3572 g . 1mol / 105.98g = 3.37×10⁻³ moles
Ratio is 1:2. We say:
1 mol of sodium carbonate react to 2 moles of silver nitrate
Then, our 3.37×10⁻³ moles of carbonate may react to: 3.37×10⁻³ . 2
= 6.74×10⁻³ moles
If we convert to mmoles → 6.74×10⁻³ mol . 1000 mmol / mol = 6.74 mmol
Molarity is mol/L but we can use mmol /mL
6.74 mol / volume in mL = 0.07216 M
6.74 mol / 0.07216 M = volume in mL → 93.4 mL
Which of these is NOT a producer in the coral reef ecosystem? *
1. phytoplankton
2. sea grass
3. microalgae
4. coral
Answer:
option number 4. 'coral'
Explanation:
-
Given 32.0 g of water, if we see a temperature change from 25.0°C to 20.0°C, then how much heat energy (q) is transferred from the water?
(The specific heat of water is 4.184 J/g°C )
Answer:
Q = 669.44 J
Explanation:
Given that,
Mass of water, m = 32 g
The temperature change from 25.0°C to 20.0°C.
We need to find the amount of heat energy transferred. Let it is Q. We know that,
[tex]Q=mc\Delta T[/tex]
Where
c is the specific heat of water
Put all the values,
[tex]Q=32\times 4.184 \times (20-25)\\Q=669.44\ J[/tex]
So, 669.44 J of heat energy is transferred from the water.
Can someone help me with a bio organic questions??♀️
In which substance are molecules moving the fastest? The options are, a. Solid water (ice) b. Liquid water c. Water vapor (gas)
Answer:
The answer is C
Explanation:
The more space the molecules have the faster they will move, solid doesn't allow movement at all, when it gets to liquid they are free to move around because it's more space, when a gas they can move all around in the air.
Look at the table of dissociation constants for some acids.
Acid Ka Acetic acid 18 x 10-6 1.2 x 10-2 Chlorous acid Nitrous acid 4.0 x 10 -4 Propionic acid 1.3 x 10-5
Which of these is the strongest acid?
acetic acid
chlorous acid
nitrous acid
propionic acid
*Answer is B*
Answer:
chlorous acid
Explanation:
The acidic equilibrium of weak acids, HX, occurs as follows:
HX ⇄ H+ + X-
Where Ka is written as:
Ka = [H+] [X-] / [HX]
The strongest acid is the acid that produce more H+. The acid with the higher Ka is the acid that produce more [H+] and is, thus, the strongest acid.
The higher Ka is the Ka of chlorus acid = 1.2x10-2
Right answer is:
chlorous acidAnswer:
chlorous acid :)
Explanation:
please help me quickly ????
Calculate the equilibrium solubility of silver arsenate
(Ksp = 6 * 10-23) in a solution that buffered to a pH of :
a) 3
b) 6
c) 9
For H3ASO4
Ka1 = 5 * 10-3
Ka2 = 1.1 * 10-7
Ka3 = 3.2 * 10-12
Answer:
sorry don't know the answer!!!
The student kicks the soccer ball three times and I shouldn’t record the distance the amount of time the ball travels and the average speed in the table shown below soccer ball girl how many seconds did it take for the ball to travel 30 m during kick three
Answer: D it’s is 2.0 s
i think..
Explanation:
Which is the same as moving the decimal point 3 places to the left in a decimal
number?
Multiplying the number by 100
Dividing the number by 1,000
Multiplying the number by 1,000
Dividing the number by 100
Answer:
B. Dividing the number by 1,000
Explanation:
Every time you move the decimal ,add a zero.Since the decimal is moved three times ,there are three zeroes. When you move left ,the number is getting smaller so it is division.
How many moles of O2 did you produce the 8.31 moles of H2O
the equation is not present.
What is the total mass of products formed when 64.18 grams of CH4 is burned with excess oxygen?
Given the reaction: N2 + O2 = 2NO for which the Keq at 2273 K is 1.2 x 10-4
a. Write the equilibrium constant expression for the reaction.
b. Write the equation that would allow you solve for the concentration of NO.
c. What is the concentration of NO if [NZ] = 0.166M and [02] = 0.145M?
Answer:
(a): The expression of equilibrium constant is [tex]K_{eq}=\frac{[NO]^2}{[N_2][O_2]}[/tex]
(b): The equation to solve the concentration of NO is [tex][NO]=\sqrt{K_{eq}\times [N_2]\times [O_2]}[/tex]
(c): The concentration of NO is 0.0017 M.
Explanation:
The equilibrium constant is defined as the ratio of the concentration of products to the concentration of reactants raised to the power of the stoichiometric coefficient of each. It is represented by the term [tex]K_{eq}[/tex]
(a):
The given chemical equation follows:
[tex]N_2+O_2\rightarrow 2NO[/tex]
The expression for equilbrium constant will be:
[tex]K_{eq}=\frac{[NO]^2}{[N_2][O_2]}[/tex]
(b):
The equation to solve the concentration of NO follows:
[tex][NO]=\sqrt{K_{eq}\times [N_2]\times [O_2]}[/tex] ......(1)
(c):
Given values:
[tex]K_{eq}=1.2\times 10^{-4}[/tex]
[tex][N_2]_{eq}=0.166M[/tex]
[tex][O_2]_{eq}=0.145M[/tex]
Plugging values in equation 1, we get:
[tex][NO]=\sqrt{(1.2\times 10^{-4})\times 0.166\times 0.145}[/tex]
[tex][NO]=\sqrt{2.88\times 10^{-6}}[/tex]
[tex][NO]=0.0017 M[/tex]
Hence, the concentration of NO is 0.0017 M.
Give two examples of each of the following:
1.) Physical systems designed by people.
2.) Naturally occurring physical systems.
3.) Social systems that you are a part of.
4.) Naturally occurring social system.
A potted plant is placed under a grow lamp, which provides 6,400 J of energy to the plant and the soil over the course of an hour. The specific heat capacity of the soil is about 0.840 J/g°C and the temperature goes up by 9.25°C of soil. How many grams of soil are there?
Answer:
823.7g
Explanation:
Using the formula as follows:
Q = m × c × ∆T
Where;
Q = amount of heat (J)
m = mass of substance (g)
c = specific heat capacity (J/g°C)
∆T = change in temperature (°C)
Using the information given in this question as follows:
Q = 6,400 J
m = ?
c of soil = 0.840 J/g°C
∆T = 9.25°C
Using Q = mc∆T
m = Q ÷ c∆T
m = 6,400 ÷ (0.840 × 9.25)
m = 6400 ÷ 7.77
m = 823.7g
Answer:
There are 823.68 grams.
Explanation:
Calorimetry is responsible for measuring the amount of heat generated or lost in certain physical or chemical processes.
Between heat and temperature there is a relationship of direct proportionality. The constant of proportionality depends on the substance that constitutes the body and its mass, and is the product of the specific heat by the mass of the body. In summary, the amount of heat Q that receives or transmits a mass m of a substance with specific heat C to raise its temperature from T1 to T2 is given by the formula:
Q= C*m* (T2- T1) = C*m* ΔT
In this case:
Q= 6400 JC= 0.840 [tex]\frac{J}{g*C}[/tex]m= ?ΔT= 9.25 CReplacing:
6400J= 0.840 [tex]\frac{J}{g*C}[/tex] *m* 9.25 C
Solving:
[tex]m=\frac{6400 J}{0.840 \frac{J}{g*C} *9.25 C}[/tex]
m=823.68 grams
There are 823.68 grams.
What would the IUPAC name be?
Answer:
methyl ethanoate
Explanation:
To name the compound given above, the following must be obtained:
1. Determine the functional group of the compound.
In this case, the functional group is R–COOR' where R and R' are alkyl groups. Thus, the compound is an ester.
2. Determine the longest chain before the functional group and the compound after the functional group.
In this case, the longest chain before the functional group is carbon 2 i.e ethane and the compound after the functional group is methyl.
3. Name the compound by naming the compound after the functional group first, followed by the compound before the functional group and ending it with –oate.
This is illustrated below:
After the functional group => methyl
Before the functional group => ethane
Name of the compound => methyl ethanoate
hello HELP ME pLS ANYONE with this question I will give u 18 points pls I need real help here:((
Answer:
Boiling - The process of a liquid changing to gas.
Boiling point - The temperature at which a liquid boils.
Condensing - The process of a gas changing to a liquid.
Distillate - The liquid collect from the condenser.
Residue - The liquid left behind in the distillation flask.
Vapour - Another name for gas.
Hope it helps :)
Silver nitrate, AgNO3, reacts with ferric chloride, FeCl3, to give silver chloride, AgCl, and ferric nitrate, Fe(NO3)3. In a particular experiment, it was planned to mix a solution containing 25.0 g of AgNO3 with another solution containing 45.0 grams of FeCl3. Write the chemical equation for the reaction.
Answer:
[tex]\mathbf{FeCl_3 + AgNO_3 \to 3 AgCl+Fe(NO_3)_3}[/tex]
Explanation:
From the given question,
The chemical equation is:
[tex]\mathbf{FeCl_3 + AgNO_3 \to 3 AgCl+Fe(NO_3)_3}[/tex]
We are given that:
mass of [tex]FeCl_3[/tex] = 45 g
number of moles of [tex]FeCl_3[/tex] = 45 g/162.2 g/mol
= 0.28 mol
mass of [tex]AgNO_3[/tex] = 25g
number of moles of [tex]AgNO_3[/tex] = 25/169.87
= 0.147 mol
From the given equation 1 mole of [tex]FeCl_3[/tex] is required to make 3 mole of [tex]AgNO_3[/tex]
0.28 mole of [tex]FeCl_3[/tex] = 0.28 × 3 = 0.84 mol of [tex]AgNO_3[/tex]
Here [tex]AgNO_3[/tex] is the limiting reagent.
Thus,
3 mole of [tex]AgNO_3[/tex] = 3 moles of AgCl
0.147 mole of [tex]AgNO_3[/tex] = 0.147 mole of AgCl produced.