Write the condensed electron configurations for the Ca atom. Express your answer in condensed form as a series of orbitals. For example, [He]2s22p2 should be entered as [He]2s^22p^2.

Answer:

[tex]1s^22s^22p^3[/tex]

Explanation:

Nitrogen has the atomic number = 7

So, No. of electrons = 7

Electronic Configuration:

[tex]1s^22s^22p^3[/tex]

Remember that:

s sub shell holds upto 2 electrons while p sub shell upto 6

Answer:

empirical formula = CH2O

molecular formula = C2H4O2

Answer:

The potential difference between the cathode and anode are set up from the chemical reaction. Inside the battery electrons are pushed by the chemical reaction toward the positive end creating a potential difference. It is this potential difference that drives the electrons through the wire.

Silver chloride (AgCl) is a crystalline solid substance that is composed of silver and chloride ions. AgCl is an ionic solid. Thus, option D is correct.

Ionic solids are substances that show the properties of solid matter and have ionic, positive, and negative charges in them. They are linked together by the attraction of the opposite charges.

The silver metal in the molecule has a positive charge and the chloride ions are negative in charge making them establish an ionic bond.

The solid molecule is held together by ionic bonds and not the covalent or other metallic bonds. The cations and anions of AgCl are linked together by the electrostatic forces that make their structure appear strong and brittle.

Therefore, AgCl has been known as an ionic solid.

Learn more about ionic solids here:

https://brainly.com/question/14957043

#SPJ6

Answer:

D. pollution

Explanation:

Increase in ocean temperature is one of the major consequence of global warming which directly leads to rise in sea level,  coral bleaching and ocean deoxygenation.

Warming ocean temperatures do not leads to pollution directly whereas pollution leads to warming ocean temperatures. So, in the case of pollution, the effect is opposite.

Hence, the correct option is D.

Answer:

Be∠ Li∠ Ba∠ Na∠ Cs

Explanation:

Beryllium does not react with water. It is the only alkaline earth metal that does not react with water because of its small size and high ionization energy. Beryllium differs considerably from other members of group two, its compounds when anhydrous show a considerable degree of covalent character.

As the atomic number of the group two elements increases, their ionization energies decreases and their electrode potentials become more negative hence their reactivity increases down the group. This implies that barium will have a very negative electrode potential comparable to that of the alkali metals, hence it reacts considerably with water.

The reactivity of alkali metals with water increases down the group. Lithium reacts quietly with water, sodium and potassium react with water with increasing vigour while rubidium and cesium react with water with exceptional violence.

This little explanation, is the reason behind the option chosen as the answer.

Answer:

Homoanular dienes have a greater base value than heteroanular dienes

Explanation:

Woodward in 1945 gave a set of rules relating the wavelength of maximum absorption to the structure of a compound. These rules were modified by Fieser in 1959. These sets of rules describe the absorption of organic molecules in the UV region of the electromagnetic spectrum.

Each system of diene or triene has a given fixed value at which maximum absorption is expected to occur according to Woodward rules. This given fixed value is called the base or parent value. If the two double bonds are trans to each other, the diene is said to be transoid. If the two double bonds belong to different rings, the system is said to be heteroanular and the base value in each case is 215nm. If the double bonds are cis to each other (cisoid), or the two double bonds are in the same ring (homoanular), then the base value is 253nm.

Since λmax = base value + ∑ substituent contributions + ∑ other contributions, if the other contributions are not very significant, homoanular diene will have a greater λmax because of its larger base value compared to heteroanular diene. This correlates well with the fact that conjugated systems absorb at a longer wavelength.

Answer:

A SOLUTION THAT REGULATES pH BECAUSE IT IS SUCH A STRONG ACID OR BASE

Explanation:

A buffer solution is an aqueous solution consisting of a weak acid and its conjugate base. It is an aqueous solution used to keep the pH of solution at a nearly constant value in various chemical processes. It resists change in pH when either a strong acid or a strong base  is added. So it is very essential in various chemical applications and even in the human body as the blood pH is kept in nearly constant value by the bicarbonate buffer system in conjunction with the kidneys. The buffer solution is able to keep this nearly constant range of values because of the equilibrium between the weak acid and its conjugate base. So therefore, the incorrect statement in the options is that buffer solution is a solution that regulates pH because it is such a strong acid or base. The other options are correct.

Answer:

They are also relatively soft metals: sodium and potassium can be cut with a butter knife.

Answer:A

Explanation:

Answer:

0.1688L of the 1M NaOH stock solution

Explanation:

A 215mM = 0.215M solution of NaOH contains 0.215 moles per liter. As you want to prepare 785mL = 0.785L of the 0.215M you will need:

0.785L × ( 0.215mol / L) = 0.1688 moles of NaOH.

These moles of NaOH comes from the 1M stock solution, that means the volume of 1M NaOH solution you need is:

0.1688 moles NaOH × (1L / 1mol) =

The volume of the stock solution of 1 M NaOH stock solution needed to make 785 mL of a 215 mM NaOH dilution is 0.169 L

From the question given above, the following data were obtained:

Molarity of stock (M₁) = 1 M

Volume of diluted solution (V₂) = 785 mL = 785 / 1000 = 0.785 L

Molarity of diluted solution (M₂) = 215 mM = 215 / 1000 = 0.215 M

Volume of stock solution needed (V₁) =?

The volume of the stock solution needed can be obtained as follow:

1 × V₁ = 0.215 × 0.785

Therefore, the volume of the stock solution needed is 0.169 L

Learn more: https://brainly.com/question/24219233

Answer:

2H₂O (liq) + 2e⁻⇒ H₂ (g) + 2OH⁻ (aq)

Explanation:

In reduction-oxidation reaction two reactions take place, one is oxidation and the other is reduction reaction. In an oxidation reaction, there is the loss of an electron whereas in the reduction reaction there is gain of electron occus.

Reduction reaction occurs on the cathode, in a reduction of water there is gain of 2 electrons to gaseous hydrogen in basic aqueous solution. half-reaction for the reduction of liquid water to gaseous hydrogen in basic aqueous solution-

2H₂O (liq) + 2e⁻⇒ H₂ (g) + 2OH⁻ (aq)

Answer:

See explanation

Explanation:

In this case, we have to check two variables:

1) The leaving group

2) The carbon bonded to the leaving group.

Let's check one by one:

2-chloro-3-methylbutane

In this molecule, the leaving group is "Cl", the carbon bonded to the leaving group has two neighbors. Therefore, we have a secondary substrate.

1-phenylpropan-1-ol

In this molecule, the leaving group is "OH", the carbon bonded to the hydroxyl group has two neighbors also. So, we have a secondary substrate.

(E)-pent-3-en-2-yl 4-methylbenzenesulfonate

In this case, the leaving group is "OTs" (Tosylate), the carbon bonded to the tosylate group has as a neighbor a double bond. Therefore, we have an allylic substrate.

3a-bromooctahydro-1H-indene

In this molecule, the leaving group is "Br", the carbon bonded to the bromine has three neighbors. So, we have a tertiary substrate.

1-iodo-3-methylbutane

In this molecule, the leaving group is "I", the carbon bonded to the iodide has only one neighbor. So, we have a primary substrate.

See figure 1

I hope it helps!

Answer:

The number of moles of solute present in 4.00 L of an 8.30 M solution​ is 33.2

Explanation:

The Molarity (M) or Molar Concentration is the number of moles of solute per liter of solution; in other words it is the number of moles of solute that are dissolved in a given volume.

The molarity of a solution is calculated by dividing the moles of the solute by the volume of the solution:

[tex]Molarity=\frac{number of moles of solute}{volume}[/tex]

Molarity is expressed in units ([tex]\frac{moles}{liter}[/tex])  or M.

In this case:

Replacing:

[tex]8.30 M=\frac{number of moles of solute}{4 L}[/tex]

Solving:

number of moles of solute= 8.30 M* 4 L= 8.30 [tex]\frac{moles}{liter}[/tex] * 4 L

number of moles of solute =33.2

The number of moles of solute present in 4.00 L of an 8.30 M solution​ is 33.2

Answer:

33.2 is the answer

Explanation:

did the test already :)

Answer:a

Explanation:

The three characteristics of minerals are that they are solid, have definite crystal structure and definite chemical composition.

Minerals are defined as a chemical compound  which has a well -defined composition and possesses a specific crystal structure.It occurs naturally in the pure form.

If a compound occurs naturally in different crystal structure then each structure is considered as a different mineral.The chemical composition of a mineral varies  depending on the presence of small impurities which are present in small quantities.

Some minerals  can have variable proportions of two or more chemical elements  which occupy equivalent position in the crystal structure.It may also have variable composition which is split into separate species.

Physical properties of minerals include color,streak, luster,specific gravity  and cleavage.

Learn more about minerals ,here:

https://brainly.com/question/1333886

#SPJ6

Answer:

CaSO4•3H2O.

Explanation:

Let the compound be CaSO4.xH2O.

The following data were obtained from the question:

Mass of hydrated compound (CaSO4.xH2O) = 0.4813g

Mass of anhydrous compound (CaSO4) = 0.3750g

Next we shall determine the mass of the water is the hydrated compound.

This is illustrated below:

Mass of water = mass of hydrated – mass of anhydrous.

Mass of water = 0.4813 – 0.3750

Mass of water = 0.1063g

Next, we shall determine the number of mole of the anhydrous compound and the number of mole of the water present in the compound. This is illustrated below:

Molar mass of anhydrous CaSO4 = 63.5 + 32 + (16x4) = 159.5g/mol

Mass of anhydrous CaSO4 = 0.3750g

Mole of anhydrous CaSO4 =...?

Mole = mass /Molar mass

Mole of anhydrous CaSO4 = 0.3750/159.5 = 2.35×10¯³ mole

Molar mass of H2O = (2x1) + 16 = 18g/mol

Mass of H2O = 0.1063g

Number of mole of H2O =.?

Mole = mass /Molar mass

Mole of H2O = 0.1063/18 = 5.91×10¯³ mole

Next we shall determine the ratio of number of mole of anhydrous CaSO4 to that of H2O. This is illustrated below:

Mole of anhydrous CaSO4 = 2.35×10¯³ mole

Mole of H2O = 5.91×10¯³ mole

Ratio of anhydrous CaSO4 to H2O =>

CaSO4 : H2O => 2.35×10¯³ /5.91×10¯³

CaSO4 : H2O => 1 : 3

Therefore, for 1 mole of the anhydrous CaSO4, there are 3 moles of H2O.

Therefore, the formula for the hydrate compound CaSO4.xH2O => CaSO4•3H2O.

Answer:

thickness of the gold sheet = 4.74 * 10⁻⁶ cm

Explanation:

mass of gold sample = 1.2 oz,; area of rectangular gold sheet = 400 sq. ft

Converting mass of gold from oz. to g

1 oz. = 28.35 g

mass of gold sample in grams = 1.2 * 28.35 g = 34.02 g

Converting from feet to cm;

1 feet  =  12 * 2.54 cm = 30.48 cm

1 sq. ft = (30.48)² = 929.0304 cm²

area of gold in cm² = 400 * 929.0304 cm² = 371612.16 cm²

Since the density of a solid is constant

Density = mass/volume

Volume = mass/density

where volume =area * thickness

therefore, area * thickness =mass/density

thickness = mass/(density * area)

substituting the value; thickness = 34.02 g/(19.3 gcm⁻³ *371612.16 cm²)

thickness of the gold sheet = 4.74 * 10⁻⁶ cm

Answer:

[tex]\rho = 9.78\frac{g}{cm^3}[/tex]

Explanation:

Hello,

In this case, in order to compute the density of bismuth we need to apply the formula:

[tex]\rho =\frac{m_{Bi}}{V_{Bi}}[/tex]

Nonetheless, the volume is computed by the difference:

[tex]V_{Bi}=48.6-46.3=2.30cm^3[/tex]

Therefore:

[tex]\rho = \frac{22.5g}{2.30cm^300}\\\\\rho = 9.78\frac{g}{cm^3}[/tex]

Regards.

Answer:

[tex]N^{4+}O_2+2OH^-\rightarrow (N^{5+}O_3)^-+1e^-+H_2O[/tex]

Explanation:

Hello,

In this case, for the given reaction, we first start by the writing of the oxidation states of all the involved elements:

[tex]Bi^{3+}(OH)^-+N^{4+}O^{2-}_2\rightarrow Bi^0+(N^{5+}O^{2-}_3)^-[/tex]

In such a way, we are noticing nitrogen is undergoing an increase in its oxidation state, therefore it is being the oxidized species, for which the oxidation half reaction, should be (considering basic conditions):

[tex]N^{4+}O_2+H_2O+2OH^-\rightarrow (N^{5+}O_3)^-+1e^-+2H^++2OH^-\\\\N^{4+}O_2+H_2O+2OH^-\rightarrow (N^{5+}O_3)^-+1e^-+2H_2O\\\\N^{4+}O_2+2OH^-\rightarrow (N^{5+}O_3)^-+1e^-+H_2O[/tex]

Best regards.

Answer:

The answer is B

Explanation:

Answer:

B. Learning about the physical world through observation

Explanation:

A p e x 2021 :) Trust me!

Answer:

The sample is fool's gold

Explanation:

Density is defined as the ratio between mass in grams and volume in mililiters.

A sample of pure gold has a density of 19.3g/mL.

Using Archimedes' principle, the volume of the sample is:

52.2mL - 47.5mL = 4.7mL

As the mass of the sample is 23.5g, the density is:

23.5g / 4.7mL = 5g/mL

The denisty of the sample is very different to density of pure gold, that means:

the sample is fool's gold

Answer: Manganese(II)bromide

Explanation:

Because it is a chemical compound composed of manganese and bromine

Answer:

a) I, II, and III

Explanation:

For the first statement;

Solvation, is the process of attraction and association of molecules of a solvent with molecules or ions of a solute. if the solvent is water, we call this process hydration.

This means the statement is TRUE.

For the second statement;

The negatively-charged side of the water molecules are attracted to  positively-charged ions. In the case of water, the oxygen end is the negatively charged side of water. This means the statement is TRUE.

For the third statement;

The positively-charged side of the water molecules are attracted to the negatively-charged chloride ions. In the case of water, the hydrogen end is the positively charged side of water. This means the statement is TRUE.

Going through the options, we can tell that the correct option is option A.

Answer: Chromatography is a technique which is used for the separation of components present in a mixture into sub-components.

Explanation:

The solvent or liquid used for the separation of the chromatographic mixture should lie below the spot point where the mixture is loaded in an alumina column. This is done to prevent the air bubbles formations, which can lead to poor sanitation. Also this is done to prevent the mixing of the mixture to be separated with the solvent instead of running with the solvent via capillary action.

Answer:

n= 0.08186

{He}2s^2 2p^6

Explanation:

PV=nRT

n=PV/RT

n= (1.220 atm)(4.3410 L) / (0.0821 atm*L/mol*K)(788.0 K)

n=0.08186

As for the electron configuration:

Ne:

{He} 2s^2 2p^6

or long hang:

1s^2 2s^2 2p^6

[tex][Ne]=1s^22s^22p^{10}[/tex]

Given:

To find:

1.

The pressure of the gaseous boron trifluoride = P = 1.220 atm

The volume of the gas in bulb = V = 4.3410 L

The moles of the  gaseous boron trifluoride = n

The temperature of gaseous boron trifluoride = T = 788.0 K

Using an ideal gas equation:

[tex]PV = nRT\\\\1.220 atm\times 4.3410 L=n\times 0.0821 atm L/mol K\times 788.0 K\\\\n=\frac{1.220 atm\times 4.3410 L}{0.0821 atm L/mol K\times 788.0 K}\\\\n=0.08186 mol[/tex]

The moles of gaseous boron trifluoride is 0.08186 moles.

2.

The atomic number of neon atom = 10

The electronic configuration in the ground state is the most stable arrangement of the electrons in the lowest energy levels.

The ground state electronic configuration of neon is:

[tex][Ne]=1s^22s^22p^{10}[/tex]

Learn more about the ideal gas equation and electronic configuration here:

brainly.com/question/1056445?referrer=searchResults

brainly.com/question/5524513?referrer=searchResults

Answer:

The empirical formula is: C₂H₃O

Explanation:

The empirical formula, also known as the “minimum formula”, is the simplest expression to represent a chemical compound and indicates the elements that are present and the minimum integer ratio between its atoms.

The percentage composition is the percentage by mass of each of the elements present in a compound.

Having 100 g of the compound as a base, it is possible to express the percentages in grams. That is, assuming you have 100 g of the compound, you have 53.46 g of  C , 6.98 g of  H , and 39.56 g of  O.

Taking into account the molecular mass of each substance, the number of relative atoms of each chemical element is calculated:

C: [tex]53.46 g *\frac{1 mol}{12.01 g } = 4.45 moles[/tex]

H:[tex]6.98 g *\frac{1 mol}{1.01 g } = 6.91 moles[/tex]

O:[tex]39.56 g *\frac{1 mol}{16g } = 2.47 moles[/tex]

Now you divide each value obtained by the least of them:

C: [tex]\frac{4.45 moles}{2.47 moles}= 1.80[/tex]

H:[tex]\frac{6.91 moles}{2.47 moles}= 2.8[/tex]

O:[tex]\frac{2.47 moles}{2.47 moles}=1[/tex]

Decimals approach the nearest integer, then:

C: 2

H: 3

O: 1

Therefore the empirical formula is: C₂H₃O

Answer: The other guy is wrong. The correct answer is C9H14O5

Explanation:

et the mass percentages from the percent composition represent grams in a total mass of 100g. Use the grams to calculate the number of moles of each atom present.

%C:53.46%molC=53.46gC=53.46gC×1molC12.011gC=4.451molC

%H:6.98%molH=6.98gH=6.98gH×1molH1.008gH=6.924molH

%O:39.56%molO=39.56gO=39.56gO×1molO15.999gO=2.473molO

Divide by the smallest number of moles.

subscriptC=4.451molC2.473molO≈1.800≈95

subscriptH=6.924molH2.473molO≈2.800≈145

subscriptO=2.473molO2.473molO=1

Now, multiply each subscript by 5 to achieve whole number subscripts. Therefore, the empirical formula is C9H14O5.

Answer:

in crystalline solids

Hope this answers your question, good luck

The crystalline solids represent the best identification where the long-range order should be found.

Crystalline solids refer to the solid where the atoms, molecules should be make the arrangement. The smallest & repeated pattern of this solid should be called as the unit cell. The unit cell should be treated as the bricks in the wall which means it should be homogenous in the nature and repeated

Therefore, The crystalline solids represent the best identification where the long-range order should be found.

Learn more about solid here: https://brainly.com/question/17431076