Programming problem the C code is: In the given programming problem, the C code that is used to solve the programming problem is:Algorithm to solve this problem is: Step 1: Ask the user for input, the user's birthday (consisting of the month, day and year).
Step 2: Ask the user for input, the current day (consisting of the month, day and year). Step 3: Subtract the current date from the birthdate and divide the result by 365.25 to obtain the age of the individual. Step 4: Calculate the maximum heart rate of the individual using the formula 220 - age in years. Step 5: Calculate the range of target heart rates for the individual using the formula 50 - 85% of the maximum heart rate. Step 6: Display the age of the individual, the maximum heart rate and the target heart rate range to the user.
The program calculates the maximum heart rate of the person using the formula 220 - age in years. It then calculates the target heart rate range for the individual using the formula 50 - 85% of the maximum heart rate. The program then displays the age of the individual, the maximum heart rate and the target heart rate range to the user. The output of the above code is:Enter your birth date (dd/mm/yyyy): 12/12/1990Enter the current date (dd/mm/yyyy): 05/07/2021Your age is 30.Your maximum heart rate is 190.00 bpm.Your target heart rate range is 95.00 bpm to 161.50 bpm.
To know more about Algorithm visit:
https://brainly.com/question/33344655
#SPJ11
Use C++ to code a simple game outlined below.
Each PLAYER has:
- a name
- an ability level (0, 1, or 2)
- a player status (0: normal ; 1: captain)
- a score
Each TEAM has:
- a name
- a group of players
- a total team score
- exactly one captain Whenever a player has a turn, they get a random score:
- ability level 0: score is equally likely to be 0, 1, 2, or 3
- ability level 1: score is equally likely to be 2, 3, 4, or 5
- ability level 2: score is equally likely to be 4, 5, 6, or 7
Whenever a TEAM has a turn
- every "normal" player on the team gets a turn
- the captain gets two turns. A competition goes as follows:
- players are created
- two teams are created
- a draft is conducted in which each team picks players
- the competition has 5 rounds
- during each round, each team gets a turn (see above)
- at the end, team with the highest score wins
You should write the classes for player and team so that all three test cases work.
For best results, start small. Get "player" to work, then team, then the game.
Likewise, for "player", start with the constructor and then work up from three
Test as you go. Note:
min + (rand() % (int)(max - min + 1))
... generates a random integer between min and max, inclusive
Feel free to add other helper functions or features or whatever if that helps.
The "vector" data type in C++ can be very helpful here.
Starter code can be found below. Base the code off of the provided work.
File: play_game.cpp
#include
#include "player.cpp" #include "team.cpp"
using namespace std;
void test_case_1();
void test_case_2();
void test_case_3();
int main(){
// pick a test case to run, or create your own
test_case_1();
test_case_2();
test_case_3();
return 0;
} // Test ability to create players
void test_case_1(){
cout << "********** Test Case 1 **********" << endl;
// create a player
player alice("Alice Adams");
// reset player's score to zero
alice.reset_score();
// set player's ability (0, 1, or 2)
alice.set_ability(0); // player gets a single turn (score is incremented by a random number)
alice.play_turn();
// return the player's score
int score = alice.get_score();
// display the player's name and total score
alice.display();
cout << endl;
}
// Test ability to create teams
void test_case_2(){ cout << "********** Test Case 2 **********" << endl;
// create players by specifying name and skill level
player* alice = new player("Alice Adams" , 0);
player* brett = new player("Brett Booth" , 2);
player* cecil = new player("Cecil Cinder" , 1);
// create team
team the_dragons("The Dragons");
// assign players to teams, set Brett as the captainthe_dragons.add_player(alice , 0);
the_dragons.add_player(brett , 1);
the_dragons.add_player(cecil , 0);
// play five turns
for (int i = 0 ; i<5 ; i++)
the_dragons.play_turn();
// display total result cout << the_dragons.get_name() << " scored " << the_dragons.get_score() << endl;
// destroy the players!
delete alice, brett, cecil;
cout << endl;
}
// Play a sample game
void test_case_3(){
cout << "********** Test Case 3 **********" << endl; // step 1 create players
// this time I'll use a loop to make it easier. We'll make 20 players.
// to make things easier we'll assign them all the same ability level
player* player_list[20];
for (int i = 0 ; i<20 ; i++)
player_list[i] = new player("Generic Name" , 2);
// step 2 create teams
team the_dragons("The Dragons");
team the_knights("The Knights"); // step 3 pick teams (the draft)
the_dragons.add_player(player_list[0] , 1); // team 1 gets a captain
for (int i = 1 ; i < 10 ; i++)
the_dragons.add_player(player_list[i],0); // team 1 gets nine normal players
the_knights.add_player(player_list[10] , 1); // team 2 gets a captain
for (int i = 11 ; i < 20 ; i++)
the_knights.add_player(player_list[i],0); // team 2 gets nine normal players
// step 4 - play the game! 5 rounds:
for (int i = 0 ; i < 5 ; i++){
the_dragons.play_turn();
the_knights.play_turn();
} // step 5 - pick the winner
if (the_dragons.get_score() > the_knights.get_score() )
cout << the_dragons.get_name() << " win!" << endl;
else if (the_knights.get_score() > the_dragons.get_score() )
cout << the_knights.get_name() << " win!" << endl;
else
cout << "its a tie!" << endl;
cout << endl; File: player.cpp
#ifndef _PLAYER_
#define _PLAYER_
class player{
private:
public:
};
#endif
File: team.cpp
#ifndef _TEAM_
#define _TEAM_
#include "player.cpp"
class team{
private:
public:
};
#endif
}
The use of a C++ to code a simple game outlined is given based on the code below. The one below serves as a continuation of the code above.
What is the C++ programIn terms of File: player.cpp
cpp
#ifndef _PLAYER_
#define _PLAYER_
#include <iostream>
#include <cstdlib>
#include <ctime>
class Player {
private:
std::string name;
int abilityLevel;
int playerStatus;
int score;
public:
Player(const std::string& playerName) {
name = playerName;
abilityLevel = 0;
playerStatus = 0;
score = 0;
}
void resetScore() {
score = 0;
}
void setAbility(int level) {
if (level >= 0 && level <= 2) {
abilityLevel = level;
}
}
void playTurn() {
int minScore, maxScore;
if (abilityLevel == 0) {
minScore = 0;
maxScore = 3;
} else if (abilityLevel == 1) {
minScore = 2;
maxScore = 5;
} else {
minScore = 4;
maxScore = 7;
}
score += minScore + (rand() % (maxScore - minScore + 1));
}
int getScore() const {
return score;
}
void display() const {
std::cout << "Player: " << name << ", Score: " << score << std::endl;
}
};
#endif
Read more about C++ program here:
https://brainly.com/question/28959658
#SPJ4
Ask the user for a student id and print the output by using the dictionary that you made in Question 1. Student \{first name\} got \{Mark\} in the course \{Course name\} Example: Student James got 65 in the course MPM2D Database = [["1001", "Tom", "MCR3U", 89], ["1002", "Alex", "ICS3U", 76] ["1003", "Ellen", "MHF4U", 90] ["1004", "Jenifgr", "MCV4U", 50] ["1005", "Peter", "ICS4U", 45] ["1006", "John", "ICS20", 100] ["1007","James", "MPM2D", 65]] Question 1: Write a python code to change the above data structure to a dictionary with the general form : Discuss in a group Data Structure: School data ={ "student id" : (" first_name", "Course name", Mark ) } Question 2: Ask the user for a student id and print the output by using the dictionary that you made in Question 1. Student \{first_name\} got \{Mark\} in the course \{Course_name\} Example: Student James got 65 in the course MPM2D
Python program, the user is asked for a student ID, and the program retrieves the corresponding information from a dictionary, displaying the student's name, mark, and course.
Here's a Python code that implements the requested functionality:
# Dictionary creation (Question 1)
database = {
"1001": ("Tom", "MCR3U", 89),
"1002": ("Alex", "ICS3U", 76),
"1003": ("Ellen", "MHF4U", 90),
"1004": ("Jennifer", "MCV4U", 50),
"1005": ("Peter", "ICS4U", 45),
"1006": ("John", "ICS20", 100),
"1007": ("James", "MPM2D", 65)
}
# User input and output (Question 2)
student_id = input("Enter a student ID: ")
if student_id in database:
student_info = database[student_id]
first_name, course_name, mark = student_info
print(f"Student {first_name} got {mark} in the course {course_name}")
else:
print("Invalid student ID. Please try again.")
The dictionary database is created according to the provided data structure, where each student ID maps to a tuple containing the first name, course name, and mark.
The program prompts the user to enter a student ID.
If the entered student ID exists in the database, the corresponding information is retrieved and assigned to the variables first_name, course_name, and mark.
The program then prints the output in the desired format, including the student's first name, mark, and course name.
If the entered student ID is not found in the database, an error message is displayed.
Learn more about Python program: brainly.com/question/26497128
#SPJ11
(RCRA) Where in RCRA is the administrator required to establish criteria for MSWLFS? (ref only)
Question 8 (CERCLA) What is the difference between a "removal" and a "remedial action" relative to a hazardous substance release? (SHORT answer and refs)
RCRA (Resource Conservation and Recovery Act) is a federal law that provides the framework for the management of hazardous and non-hazardous solid waste, including municipal solid waste landfills (MSWLFS). The administrator is required to establish criteria for MSWLFS in Subtitle D of RCRA (Solid Waste Disposal)
The administrator is required to establish criteria for MSWLFS in Subtitle D of RCRA (Solid Waste Disposal). RCRA also provides a framework for the management of hazardous waste from the time it is generated to its ultimate disposal.CERCLA (Comprehensive Environmental Response, Compensation, and Liability Act) is a federal law that provides a framework for cleaning up hazardous waste sites. A "removal" is an immediate or short-term response to address a hazardous substance release that poses an imminent threat to human health or the environment
. A "remedial action" is a long-term response to address the contamination of a hazardous waste site that poses a significant threat to human health or the environment.The key differences between removal and remedial action are the time required to complete the response, the resources needed to complete the response, and the outcome of the response. Removal actions are typically completed in a matter of weeks or months and often involve emergency response activities, such as containing a hazardous substance release. Remedial actions, on the other hand, are typically completed over a period of years and involve a range of activities.
To know more about administrator visit:
https://brainly.com/question/1733513
#SPJ11
The following gives an English sentence and a number of candidate logical expressions in First Order Logic. For each of the logical expressions, state whether it (1) correctly expresses the English sentence; (2) is syntactically invalid and therefore meaningless; or (3) is syntactically valid but does not express the meaning of the English sentence: Every bird loves its mother or father. 1. VæBird(a) = Loves(x, Mother(x) V Father(x)) 2. Væ-Bird(x) V Loves(x, Mother(x)) v Loves(x, Father(x)) 3. VæBird(x) ^ (Loves(x, Mother(x)) V Loves(x, Father(x)))
Option 1 correctly expresses the English sentence.
Does option 1 correctly express the English sentence "Every bird loves its mother or father"?Option 1, "VæBird(a) = Loves(x, Mother(x) V Father(x))," correctly expresses the English sentence "Every bird loves its mother or father." The logical expression uses the universal quantifier "VæBird(a)" to indicate that the statement applies to all birds. It further states that every bird "Loves(x)" either its mother "Mother(x)" or its father "Father(x)" through the use of the disjunction operator "V" (OR). Thus, option 1 accurately captures the intended meaning of the English sentence.
Learn more about: expresses
brainly.com/question/28170201
#SPJ11
he function below takes two string arguments: word and text. Complete the function to return whichever of the strings is shorter. You don't have to worry about the case where the strings are the same length. student.py 1 - def shorter_string(word, text):
The function below takes two string arguments: word and text. Complete the function to return whichever of the strings is shorter. You don't have to worry about the case where the strings are the same length.student.py1- def shorter_string(word, text):
Here is a possible solution to the problem:```python# Define the function that takes in two stringsdef shorter_string(word, text): # Check which of the two strings is shorterif len(word) < len(text): return wordelif len(text) < len(word): return text```. In the above code, the `shorter_string` function takes two arguments: `word` and `text`.
It then checks the length of each of the two strings using the `len()` function. It returns the `word` string if it is shorter and the `text` string if it is shorter. If the two strings have the same length, the function will return `None`.
To know more about string visit:
brainly.com/question/15841654
#SPJ11
A ______ is designed to correct a known bug or fix a known vulnerability in a piece of software.
A) tap
B) patch
C) fix
A patch is designed to correct a known bug or fix a known vulnerability in a piece of software. The answer to the given question is B) Patch.
A patch is a code-correction applied to a software application to resolve bugs, vulnerabilities, or other issues with the app's performance.
A patch is a type of modification applied to an application to repair or upgrade it. Patching is the process of repairing or enhancing a software system.
Patches have the following characteristics: It's possible to install or reverse them. They are typically simple to use.
To know more about software visit:
https://brainly.com/question/32393976
#SPJ11
a nonpipelined processor has a clock rate of 2.5 ghz and an average cpi (cycles per instruction) of 4. an upgrade to the processor introduces a five-stage pipeline. however, due to internal pipeline delays, such as latch delay, the clock rate of the new processor has to be reduced to 2 ghz. a. what is the speedup achieved for a typical program? b. what is the mips rate for each processor?
a) The speedup achieved for a typical program is 1.25.
b) The MIPS rate for the old processor is 625 MIPS,and the MIPS rate for the new processor is 500 MIPS.
How is this so?To calculate the speedup achieved for a typical program and the MIPS rate for each processor, we can use the following formulas -
a) Speedup = Clock Rate of Old Processor / Clock Rate of New Processor
b) MIPS Rate = Clock Rate / (CPI * 10⁶)
Given -
- Clock rate of the old processor = 2.5 GHz
- Average CPI of the old processor = 4
- Clock rate of the new processor = 2 GHz
a) Speedup = 2.5 GHz / 2 GHz = 1.25
The new processor achieves a speedup of 1.25 for a typical program.
b) MIPS Rate for the old processor = (2.5 GHz) / (4 * 10⁶) = 625 MIPS
MIPS Rate for the new processor = (2 GHz) / (4 * 10⁶) = 500 MIPS
The old processor has a MIPS rate of 625 MIPS, while the new processor has a MIPSrate of 500 MIPS.
Learn more about processor at:
https://brainly.com/question/31055068
#SPJ4
hi i already have java code now i need test cases only. thanks.
Case study was given below. From case study by using eclipse IDE
1. Create and implement test cases to demonstrate that the software system have achieved the required functionalities.
Case study: Individual income tax rates
These income tax rates show the amount of tax payable in every dollar for each income tax bracket depending on your circumstances.
Find out about the tax rates for individual taxpayers who are:
Residents
Foreign residents
Children
Working holiday makers
Residents
These rates apply to individuals who are Australian residents for tax purposes.
Resident tax rates 2022–23
Resident tax rates 2022–23
Taxable income
Tax on this income
0 – $18,200
Nil
$18,201 – $45,000
19 cents for each $1 over $18,200
$45,001 – $120,000
$5,092 plus 32.5 cents for each $1 over $45,000
$120,001 – $180,000
$29,467 plus 37 cents for each $1 over $120,000
$180,001 and over
$51,667 plus 45 cents for each $1 over $180,000
The above rates do not include the Medicare levy of 2%.
Resident tax rates 2021–22
Resident tax rates 2021–22
Taxable income
Tax on this income
0 – $18,200
Nil
$18,201 – $45,000
19 cents for each $1 over $18,200
$45,001 – $120,000
$5,092 plus 32.5 cents for each $1 over $45,000
$120,001 – $180,000
$29,467 plus 37 cents for each $1 over $120,000
$180,001 and over
$51,667 plus 45 cents for each $1 over $180,000
The above rates do not include the Medicare levy of 2%.
Foreign residents
These rates apply to individuals who are foreign residents for tax purposes.
Foreign resident tax rates 2022–23
Foreign resident tax rates 2022–23
Taxable income
Tax on this income
0 – $120,000
32.5 cents for each $1
$120,001 – $180,000
$39,000 plus 37 cents for each $1 over $120,000
$180,001 and over
$61,200 plus 45 cents for each $1 over $180,000
Foreign resident tax rates 2021–22
Foreign resident tax rates 2021–22
Taxable income
Tax on this income
0 – $120,000
32.5 cents for each $1
$120,001 – $180,000
$39,000 plus 37 cents for each $1 over $120,000
$180,001 and over
$61,200 plus 45 cents for each $1 over $180,000
The given case study presents the income tax rates for different categories of individual taxpayers, including residents, foreign residents, children, and working holiday makers. It outlines the tax brackets and rates applicable to each category. The main purpose is to calculate the amount of tax payable based on the taxable income. This involves considering different income ranges and applying the corresponding tax rates.
1. Residents:
For individuals who are Australian residents for tax purposes.Tax rates for the 2022-23 and 2021-22 financial years are provided.Medicare levy of 2% is not included in the above rates.The tax brackets and rates are as follows:
Taxable income 0 – $18,200: No tax payable.Taxable income $18,201 – $45,000: Taxed at 19 cents for each dollar over $18,200.Taxable income $45,001 – $120,000: Taxed at $5,092 plus 32.5 cents for each dollar over $45,000.Taxable income $120,001 – $180,000: Taxed at $29,467 plus 37 cents for each dollar over $120,000.Taxable income $180,001 and over: Taxed at $51,667 plus 45 cents for each dollar over $180,000.2. Foreign residents:
Applicable to individuals who are foreign residents for tax purposes.Tax rates for the 2022-23 and 2021-22 financial years are provided.The tax brackets and rates are as follows:
Taxable income 0 – $120,000: Taxed at 32.5 cents for each dollar.Taxable income $120,001 – $180,000: Taxed at $39,000 plus 37 cents for each dollar over $120,000.Taxable income $180,001 and over: Taxed at $61,200 plus 45 cents for each dollar over $180,000.3. Children and working holiday makers:
The case study does not provide specific tax rates for children and working holiday makers.Additional research or information would be needed to determine the applicable rates for these categories.The given case study offers information on income tax rates for different categories of individual taxpayers, such as residents and foreign residents. It allows for the calculation of tax payable based on the taxable income within specific income brackets. The rates provided can be utilized to accurately determine the amount of tax owed by individuals falling within the respective categories. However, specific tax rates for children and working holiday makers are not included in the given information, necessitating further investigation to determine the applicable rates for these groups.
Learn more about Tax Rates :
https://brainly.com/question/29998903
#SPJ11
____ is the way to position an element box that removes box from flow and specifies exact coordinates with respect to its browser window
The CSS property to position an element box that removes the box from the flow and specifies exact coordinates with respect to its browser window is the position property.
This CSS property can take on several values, including absolute, fixed, relative, and static.
An absolute position: An element is absolutely positioned when it's taken out of the flow of the document and placed at a specific position on the web page.
It is positioned relative to the nearest positioned ancestor or the browser window. When an element is positioned absolutely, it is no longer in the flow of the page, and it is removed from the normal layout.
The position property is a CSS property that allows you to position an element box and remove it from the flow of the page while specifying its exact coordinates with respect to its browser window.
To know more about browser, visit:
https://brainly.com/question/19561587
#SPJ11
What is the first step of the DAX Calculation Process?
A. Check the filters of any CALCULATE function.
B. Evaluate the arithmetic.
C. Detect pivot coordinates.
D. Manually calculate the desired measure.
The first step of the DAX calculation process is to check the filters of any CALCULATE function.
The correct answer to the given question is option 3.
The DAX calculation process is a set of steps that are followed to calculate the desired measures or values. It is essential to understand these steps to achieve the correct results in the calculations of complex data models.The first step of the DAX calculation process is to evaluate the filters of any CALCULATE function that is applied to the query. This is because CALCULATE is the most frequently used function in DAX, and it allows you to manipulate the filter context of a query.
The filters are applied to the tables to create a set of rows that will be used in the calculation of the expression. These filters can be defined in different ways, including the use of filter expressions, table names, or columns.The second step of the DAX calculation process is to detect the pivot coordinates. This involves determining the values of the rows, columns, and slicers that are used in the query.
The pivot coordinates are used to define the current filter context and to determine the values that should be returned in the query.The third step of the DAX calculation process is to evaluate the arithmetic. This involves performing the calculations on the values that are retrieved from the tables using the pivot coordinates. This step can involve the use of different functions and operators to create complex expressions that can be used to generate the desired results.
The last step of the DAX calculation process is to manually calculate the desired measure. This involves applying the calculated expressions to the data in the tables to produce the desired results. It is important to ensure that the calculations are accurate and that the correct values are returned in the query.
For more such questions on DAX calculation, click on:
https://brainly.com/question/30395140
#SPJ8
Include statements #include > #include using namespace std; // Main function int main() \{ cout ≪ "Here are some approximations of PI:" ≪ endl; // Archimedes 225BC cout ≪22/7="≪22/7≪ endl; I/ zu Chongzhi 480AD cout ≪355/113="≪355/113≪ end1; // Indiana law 1897AD cout ≪"16/5="≪16/5≪ endl; // c++ math library cout ≪ "M_PI ="≪ MPPI ≪ endl; return 0 ; \} Step 1: Copy and paste the C ++
program above into your C ++
editor and compile the program. Hopefully you will not get any error messages. Step 2: When you run the program, you should see several lines of messages with different approximations of PI. The good news is that your program has output. The bad news is that all of your approximation for PI are all equal to 3 , which is not what we expected or intended. Step 3: C++ performs two types of division. If you have x/y and both numbers x and y are integers, then C ++
will do integer division, and return an integer result. On the other hand if you have x/y and either number is floating point C ++
will do floating point division and give you a floating point result. Edit your program and change "22/7" into "22.0/7.0" and recompile and run your program. Now your program should output "3.14286". Step 4: Edit your program again and convert the other integer divisions into floating point divisions. Recompile and run your program to see what it outputs. Hopefully you will see that Zu Chongzhi was a little closer to the true value of PI than the Indiana law in 1897. Step 5: By default, the "cout" command prints floating point numbers with up to 5 digits of accuracy. This is much less than the accuracy of most computers. Fortunately, the C ++
"setprecision" command can be used to output more accurate results. Edit your program and add the line "#include in the include section at the top of the file, and add the line "cout ≪ setprecision(10);" as the first line of code in the main function. Recompile and run your program. Now you should see much better results. Step 6: As you know, C ++
floats are stored in 32-bits of memory, and C ++
doubles are stored in 64-bits of memory. Naturally, it is impossible to store an infinite length floating point value in a finite length variable. Edit your program and change "setprecision(10)" to "setprecision (40) " and recompile and run your program. If you look closely at the answers you will see that they are longer but some of the digits after the 16th digit are incorrect. For example, the true value of 22.0/7.0 is 3.142857142857142857… where the 142857 pattern repeats forever. Notice that your output is incorrect after the third "2". Similarly, 16.0/5.0 should be all zeros after the 3.2 but we have random looking digits after 14 zeros. Step 7: Since 64-bit doubles only give us 15 digits of accuracy, it is misleading to output values that are longer than 15 digits long. Edit your program one final time and change "setprecision(40)" to "setprecision(15)". When you recompile and run your program you should see that the printed values of 22.0/7.0 and 16.0/5.0 are correct and the constant M_PI is printed accurately. Step 8: Once you think your program is working correctly, upload your final program into the auto grader by following the the instructions below.
The provided C++ program approximates PI and is improved by using floating-point division and increasing precision.
The provided C++ program demonstrates the approximation of the mathematical constant PI using different methods. However, due to the nature of integer division in C++, the initial results were inaccurate. Here are the steps to correct and improve the program:
Step 1: Copy the given C++ program into your editor and compile it. Ensure that no error messages appear during compilation.
Step 2: When running the program, you will notice that all the approximations for PI are equal to 3, which is incorrect. This is because integer division is used, which truncates the fractional part.
Step 3: To resolve this, modify the program by changing "22/7" to "22.0/7.0" to perform floating-point division. Recompile and run the program. Now, the output for "22.0/7.0" should be "3.14286".
Step 4: Further improve the program by converting all the integer divisions to floating-point divisions. Recompile and run the program again. You should observe that the approximation by Zu Chongzhi (355/113) is closer to the true value of PI than the Indiana law approximation (16/5).
Step 5: By default, the "cout" command prints floating-point numbers with up to 5 digits of accuracy. To increase the precision, include the header file <iomanip> at the top of the program and add the line "cout << setprecision(10);" as the first line inside the main function. Recompile and run the program to observe more accurate results.
Step 6: Note that floating-point values have limitations due to the finite memory allocated for storage. To demonstrate this, change "setprecision(10)" to "setprecision(40)". Recompile and run the program again. Although the results have more digits, some of the digits after the 16th digit may be incorrect due to the limitations of 64-bit doubles.
Step 7: Adjust the precision to a more realistic level by changing "setprecision(40)" to "setprecision(15)". Recompile and run the program to observe that the printed values for "22.0/7.0" and "16.0/5.0" are correct, along with the constant M_PI.
Step 8: Once you are satisfied with the program's correctness, upload the final version to the auto grader as per the given instructions.
In summary, by incorporating floating-point division, increasing precision, and being aware of the limitations of floating-point representations, we can obtain more accurate approximations of the mathematical constant PI in C++.
Learn more about Approximating PI.
brainly.com/question/31233430
#SPJ11
Stored Procedures: (Choose all correct answers) allow us to embed complex program logic allow us to handle exceptions better allow us to handle user inputs better allow us to have multiple execution paths based on user input none of these
Stored procedures enable us to incorporate complex program logic and better handle exceptions. As a result, the correct answers include the following: allow us to incorporate complex program logic and better handle exceptions.
A stored procedure is a collection of SQL statements that can be stored in the server and executed several times. As a result, stored procedures enable reuse, allow us to encapsulate complex logic on the database side, and have a better performance.
This is because the server caches the execution plan and it's less expensive to execute a stored procedure than individual statements. Additionally, stored procedures can improve security by limiting direct access to the tables.
You can learn more about SQL statements at: brainly.com/question/32322885
#SPJ11
Write a Java program which prompts user for at least two input values. Then write a method which gets those input values as parameters and does some calculation/manipulation with those values. The method then should return a result of the calculation/manipulation. The program should prompt user, call the method, and then print a meaningful message along with the value returned from the method.
The provided Java program prompts the user for two input values, performs a calculation by adding them together and multiplying the sum by 2, and then displays the result.
Here is a Java program that prompts the user for two input values, calls a method that does some calculation/manipulation with the values, and prints a meaningful message with the value returned from the method:
```
import java.util.Scanner;
public class CalculationManipulation {
public static void main(String[] args) {
Scanner input = new Scanner(System.in);
System.out.println("Please enter two values:");
int value1 = input.nextInt();
int value2 = input.nextInt();
int result = calculationManipulation(value1, value2);
System.out.println("The result of the calculation/manipulation is: " + result);
}
public static int calculationManipulation(int value1, int value2) {
int result = (value1 + value2) * 2;
return result;
}
}
```
In this program, we prompt the user for two input values using a `Scanner`. We then call a method called `calculationManipulation()` with these values as parameters.
This method does some calculation/manipulation with the values, which in this case is adding them together and multiplying the sum by 2. Finally, we print a meaningful message with the value returned from the method.
Learn more about Java program: brainly.com/question/26789430
#SPJ11
What is the purpose of Virtualization technology? Write the benefits of Virtualization technology. Question 2: Explain the advantages and disadvantages of an embedded OS. List three examples of systems with embedded OS. Question 3: What is the purpose of TinyOS? Write the benefits of TinyOS. Write the difference of TinyOS in comparison to the tradition OS Write TinyOS Goals Write TinyOS Components
What is the purpose of Virtualization technology? Write the benefits of Virtualization technology.Virtualization technology refers to the method of creating a virtual representation of anything, including software, storage, server, and network resources.
Its primary objective is to create a virtualization layer that abstracts underlying resources and presents them to users in a way that is independent of the underlying infrastructure. By doing so, virtualization makes it possible to run multiple operating systems and applications on a single physical server simultaneously. Furthermore, virtualization offers the following benefits:It helps to optimize the utilization of server resources.
It lowers the cost of acquiring hardware resourcesIt can assist in the testing and development of new applications and operating systemsIt enhances the flexibility and scalability of IT environments.
To know more about Virtualization technology visit:
https://brainly.com/question/32142789
#SPJ11
In MATLAB using SimuLink do the following
1. The block of a counter subsystem, which consists of two variants: ascending and descending.
The block must be able to start counting at a value determined by an input.
The step (eg 1 in 1, 2 in 2, etc.) of the count is determined by another input.
The counter runs indefinitely until the simulation time runs out
The counting algorithm must be done in code in a MATLAB-function block, blocks that perform preset functions are not allowed.
Hint: They most likely require the "Unit Delay (1/z)" block.
A counter subsystem can be created in MATLAB using Simu Link. The subsystem has two options: ascending and descending.
The following conditions must be met by the block:1. The block must be able to start counting at a value determined by an input.2. of the count is determined by another input.3. The counter runs indefinitely until the simulation time runs out.4. The counting algorithm must be done in code in a MATLAB-function block. Blocks that perform preset functions are not allowed.5.
They most likely require the "Unit Delay (1/z)" block. The Unit Delay (1/z) block is used to perform this action. It holds the input signal value for a specified period of time and then produces it as an output signal after that time has passed. This is accomplished using a variable delay or a discrete-time delay block. The following is the main answer with a detailed explanation of the procedure .
To know more about simu link visit:
https://brainly.com/question/33636383
#SPJ11
Your script should allow users to specify replacement directories for the default directories ∼/ dailyingest, ∼/ shortvideos, and ∼/ badfiles; if no replacements are specified as arguments, the defaults will be used. Your script should check that the target directories exist and can be written to. If a particular directory (such as ∼ /shortvideos/byReporter/Anne) doesn't exist yet, your script must create it first.
The script provides functionality for users to define alternative directories for the default directories ∼/dailyingest, ∼/shortvideos, and ∼/badfiles.
What happens when there is no replacement?If no replacement directories are specified as arguments, the script falls back to using the default directories. It performs a check to ensure that the target directories exist and have write permissions.
If a specific directory, such as ∼/shortvideos/byReporter/Anne, doesn't already exist, the script takes care of creating it before proceeding. This ensures that the required directory structure is in place for proper file organization and storage.
By offering flexibility in directory selection and handling directory creation when needed, the script streamlines the process of managing and organizing files.
Read more about directory files here:
https://brainly.com/question/31933248
#SPJ4
write reports on ASCII, EBCDIC AND UNICODE
ASCII, EBCDIC, and Unicode are character encoding standards used to represent text in computers and communication systems.
ASCII (American Standard Code for Information Interchange) is a widely used character encoding standard that assigns unique numeric codes to represent characters in the English alphabet, digits, punctuation marks, and control characters. It uses 7 bits to represent each character, allowing a total of 128 different characters.
EBCDIC (Extended Binary Coded Decimal Interchange Code) is another character encoding standard primarily used on IBM mainframe computers. Unlike ASCII, which uses 7 bits, EBCDIC uses 8 bits to represent each character, allowing a total of 256 different characters. EBCDIC includes additional characters and symbols compared to ASCII, making it suitable for handling data in various languages and alphabets.
Unicode is a universal character encoding standard designed to support text in all languages and writing systems. It uses a variable-length encoding scheme, with each character represented by a unique code point.
Unicode can represent a vast range of characters, including those from various scripts, symbols, emojis, and special characters. It supports multiple encoding formats, such as UTF-8 and UTF-16, which determine how the Unicode characters are stored in computer memory.
Learn more about Communication
brainly.com/question/29811467
#SPJ11
//Complete the following console program:
import java.util.ArrayList;
import java.io.*;
import java.util.Scanner;
class Student
{
private int id;
private String name;
private int age;
public Student () { }
public Student (int id, String name, int age) { }
public void setId( int s ) { }
public int getId() { }
public void setName(String s) { }
public String getName() { }
public void setAge( int a ) { }
public int getAge()
{ }
//compare based on id
public boolean equals(Object obj) {
}
//compare based on id
public int compareTo(Student stu) {
}
public String toString()
{
}
}
public class StudentDB
{ private static Scanner keyboard=new Scanner(System.in);
//Desc: Maintains a database of Student records. The database is stored in binary file Student.data
//Input: User enters commands from keyboard to manipulate database.
//Output:Database updated as directed by user.
public static void main(String[] args) throws IOException
{
ArrayList v=new ArrayList();
File s=new File("Student.data");
if (s.exists()) loadStudent(v);
int choice=5; do {
System.out.println("\t1. Add a Student record"); System.out.println("\t2. Remove a Student record"); System.out.println("\t3. Print a Student record"); System.out.println("\t4. Print all Student records"); System.out.println("\t5. Quit"); choice= keyboard.nextInt();
keyboard.nextLine();
switch (choice) {
case 1: addStudent(v); break; case 2: removeStudent(v); break; case 3: printStudent(v); break; case 4: printAllStudent(v); break; default: break; }
} while (choice!=5);
storeStudent(v); }
//Input: user enters an integer (id), a string (name), an integer (age) from the // keyboard all on separate lines
//Post: The input record added to v if id does not exist
//Output: various prompts as well as "Student added" or "Add failed: Student already exists" // printed on the screen accordingly
public static void addStudent(ArrayList v) {
}
//Input: user enters an integer (id) from the keyboard //Post: The record in v whose id field matches the input removed from v.
//Output: various prompts as well as "Student removed" or "Remove failed: Student does not // exist" printed on the screen accordingly
public static void removeStudent(ArrayList v) {
}
//Input: user enters an integer (id) from the keyboard //Output: various prompts as well as the record in v whose id field matches the input printed on the // screen or "Print failed: Student does not exist" printed on the screen accordingly
public static void printStudent(ArrayList v) {
}
//Output: All records in v printed on the screen.
public static void printAllStudent(ArrayList v) {
}
//Input: Binary file Student.data must exist and contains student records.
//Post: All records in Student.data loaded into ArrayList v.
public static void loadStudent(ArrayList v) throws IOException
{
}
//Output: All records in v written to binary file Student.data.
public static void storeStudent(ArrayList v) throws IOException
{
}
}
/*
Hint:
• Methods such as remove, get, and indexOf of class ArrayList are useful.
Usage: public int indexOf (Object obj)
Return: The index of the first occurrence of obj in this ArrayList object as determined by the equals method of obj; -1 if obj is not in the ArrayList.
Usage: public boolean remove(Object obj)
Post: If obj is in this ArrayList object as determined by the equals method of obj, the first occurrence of obj in this ArrayList object is removed. Each component in this ArrayList object with an index greater or equal to obj's index is shifted downward to have an index one smaller than the value it had previously; size is decreased by 1.
Return: true if obj is in this ArrayList object; false otherwise.
Usage: public T get(int index)
Pre: index >= 0 && index < size()
Return: The element at index in this ArrayList.
*/
The code that has been given is an implementation of ArrayList in Java. An ArrayList is a resizable array in Java that can store elements of different data types. An ArrayList contains many useful methods for manipulation of its elements.
Here, the program allows the user to maintain a database of student records in the form of a binary file that is read and written using the loadStudent() and storeStudent() methods respectively. An ArrayList named 'v' is created which holds all the records of students. Each record is stored in an object of the class Student. In order to add a record to the list, the addStudent() method is used, which asks for the user to input the id, name, and age of the student. The program also checks if a student with the same id already exists. If it does not exist, the program adds the student record to the list, else it prints "Add failed: Student already exists". In order to remove a record, the user is asked to input the id of the student whose record is to be removed. The program then searches the list for the student record using the indexOf() method, and removes the record using the remove() method. If a student with the given id does not exist, the program prints "Remove failed: Student does not exist". In order to print a single record, the user is again asked to input the id of the student whose record is to be printed. The program then searches for the record using the indexOf() method and prints the record using the toString() method of the Student class. If a student with the given id does not exist, the program prints "Print failed: Student does not exist". The printAllStudent() method prints all the records in the ArrayList by looping through it.
To know more about implementation, visit:
https://brainly.com/question/32181414
#SPJ11
Question 5 0/2 pts How many major Scopes does JavaScript have? 1 4+ 2 3
JavaScript has three major Scopes.
In JavaScript, scope refers to the accessibility or visibility of variables, functions, and objects in some particular part of your code during runtime. JavaScript has three major types of scopes: global scope, function scope, and block scope.
1. Global Scope: Variables declared outside any function or block have global scope. They can be accessed from anywhere in the code, including inside functions or blocks. Global variables are accessible throughout the entire program.
2. Function Scope: Variables declared inside a function have function scope. They are only accessible within that specific function and its nested functions. Function scope provides a level of encapsulation, allowing variables to be isolated and not interfere with other parts of the code.
3. Block Scope: Introduced in ES6 (ECMAScript 2015), block scope allows variables to be scoped to individual blocks, such as if statements or loops, using the `let` and `const` keywords. Variables declared with `let` and `const` are only accessible within the block where they are defined. Block scope helps prevent variable leaks and enhances code clarity.
In summary, JavaScript has three major scopes: global scope, function scope, and block scope. Each scope has its own set of rules regarding variable accessibility and lifetime.
Learn more about JavaScript
brainly.com/question/30031474
#SPJ11
Complete the following Programming Assignment using Recursion. Use good programming style and all the concepts previously covered. Submit the .java files electronically through Canvas as an upload file by the above due date (in a Windows zip file). This also includes the Pseudo-Code and UML (Word format). 9. Ackermann's Function Ackermann's function is a recursive mathematical algorithm that can be used to test how well a computer performs recursion. Write a method ackermann (m,n), which solves Ackermann's function. Use the following logic in your method: If m=0 then return n+1 If n=0 then return ackermann (m−1,1) Otherwise, return ackermann(m - 1, ackermann(m, m−1) ) Test your method in a program that displays the return values of the following method calls: ackermann(0,0)ackermann(0,1)ackermann(1,1)ackermann(1,2) ackermann(1,3)ackermann(2,2)ackermann(3,2) . Use Java and also provide the pseudo code
Ackermann's function is a notable example of a recursive algorithm that showcases the capabilities of recursion in solving complex mathematical problems.
public class AckermannFunction {
public static int ackermann(int m, int n) {
if (m == 0)
return n + 1;
else if (n == 0)
return ackermann(m - 1, 1);
else
return ackermann(m - 1, ackermann(m, n - 1));
}
public static void main(String[] args) {
System.out.println(ackermann(0, 0));
System.out.println(ackermann(0, 1));
System.out.println(ackermann(1, 1));
System.out.println(ackermann(1, 2));
System.out.println(ackermann(1, 3));
System.out.println(ackermann(2, 2));
System.out.println(ackermann(3, 2));
}
}
The provided code demonstrates the implementation of Ackermann's function in Java. The ackermann method takes two parameters, m and n, and recursively calculates the result based on the given logic. If m is 0, it returns n + 1. If n is 0, it recursively calls ackermann with m - 1 and 1. Otherwise, it recursively calls ackermann with m - 1 and the result of ackermann(m, n - 1).
The main method tests the ackermann function by calling it with different input values and printing the return values.
The recursive nature of Ackermann's function demonstrates the power and performance of recursive algorithms.
The provided code successfully implements Ackermann's function using recursion in Java. The function is tested with various input values to verify its correctness. Ackermann's function is a notable example of a recursive algorithm that showcases the capabilities of recursion in solving complex mathematical problems.
Learn more about recursion here:
brainly.com/question/32344376
#SPJ11
Which three of the following are commonly associated with laptop computers?
Portability, Battery Power, Built-in Display and Keyboard are commonly associated with laptop computers
Three of the following commonly associated with laptop computers are:
1. Portability: One of the key features of a laptop computer is its portability. Laptops are designed to be compact and lightweight, allowing users to carry them easily and use them in various locations.
2. Battery Power: Unlike desktop computers that require a constant power source, laptops are equipped with rechargeable batteries. This allows users to use their laptops even when they are not connected to a power outlet, providing flexibility and mobility.
3. Built-in Display and Keyboard: Laptops have a built-in display screen and keyboard, eliminating the need for external monitors and keyboards. These components are integrated into the laptop's design, making it a self-contained device.
Other options like "Higher Processing Power," "Expandable Hardware Components," and "Large Storage Capacity" are not exclusive to laptops and can be found in both laptops and desktop computers.
learn more about computers here:
https://brainly.com/question/32297640
#SPJ11
add a new class, "Adder" that adds numbers. The constructor should take the numbers as arguments, then there should be an add()method that returns the sum. Modify the main program so that it uses this new class in order to calculate the sum that it shows the user.
A class called "Adder" with a constructor that takes numbers as arguments and an add() method that returns their sum, and then it uses this class to calculate and display the sum to the user.
We define a new class called "Adder" that adds numbers. The constructor (__init__ method) takes the numbers as arguments and stores them in the "self.numbers" attribute. The add() method calculates the sum of the numbers using the built-in sum() function and returns the result.
To use this new class, we create an instance of the Adder class called "add_obj" and pass the numbers to be added as arguments using the * operator to unpack the list. Then, we call the add() method on the add_obj instance to calculate the sum and store the result in the "sum_result" variable.
Finally, we print the sum to the user by displaying the message "The sum is:" followed by the value of "sum_result".
class Adder:
def __init__(self, *args):
self.numbers = args
def add(self):
return sum(self.numbers)
numbers = [2, 4, 6, 8, 10]
add_obj = Adder(*numbers)
sum_result = add_obj.add()
print("The sum is:", sum_result)
Learn more about Adder class
brainly.com/question/31464682
#SPJ11
which of the following is generated after a site survey and shows the wi-fi signal strength throughout the building?
Heatmap is generated after a site survey and shows the wi-fi signal strength throughout the building
After conducting a site survey, a heatmap is generated to display the Wi-Fi signal strength throughout the building. A heatmap provides a visual representation of the wireless signal coverage, indicating areas of strong signal and areas with potential signal weaknesses or dead zones. This information is valuable for optimizing the placement of Wi-Fi access points and ensuring adequate coverage throughout the building.
The heatmap uses color gradients to indicate the signal strength levels. Areas with strong signal strength are usually represented with warmer colors such as red or orange, while areas with weak or no signal may be represented with cooler colors such as blue or green.
By analyzing the heatmap, network administrators or engineers can identify areas with poor Wi-Fi coverage or areas experiencing interference. This information helps in optimizing the placement of access points, adjusting power levels, or making other changes to improve the overall Wi-Fi performance and coverage in the building.
learn more about Wi-Fi here:
https://brainly.com/question/32802512
#SPJ11
Write a function called char count, which counts the occurrences of char1 in C-string str1. Note: you may not use any library functions (e.g. strlen, strcmp, etc. ) // Count the number of occurrences of charl in C−string str1 int char count(char str1[], char char1) \{ //YOUR CODE HERE // Example of using function char count() to find how many times character ' d ' occurs in string "hello world". int main (void) \{ char my str trmp[]= "hello world"; char my char tmp = ' ′
; : int my count = 0
; my count = char count (my str tmp, my, char trop); printf ("8s. has fo od times \n ′′
, my str, tmp, my, char, tmp, my count) \}
The function called char count, which counts the occurrences of char1 in C-string str1 is given by the following code:
#include
using namespace std;
int char_count(char str1[], char char1) {
int count = 0;
for(int i = 0; str1[i] != '\0'; ++i) {
if(char1 == str1[i])
++count;
}
return count;
}
int main () {
char my_str[] = "hello world";
char my_char = 'd';
int my_count = 0;
my_count = char_count(my_str, my_char);
cout << my_str << " has " << my_count << " times " << my_char << endl;
return 0;
}
So, the answer to the given question is, "The function called char count, which counts the occurrences of char1 in C-string str1 is given by the above code. The function char count counts the number of occurrences of charl in C−string str1. Also, the function uses a for loop to iterate over the string and checks if the current character is equal to the desired character. If so, the count variable is incremented. At last, the function returns the final count of the desired character in the string. Thus, the conclusion is that this function is used to find the count of a specific character in a string."
To know more about for loop, visit:
https://brainly.com/question/19116016
#SPJ11
In the DAX Calculation Process, what is the purpose of "applying the filters to the tables in the Power Pivot data tables?"
A. It will recalculate the measure in the Measure Area.
B. It will apply these filters to the PivotTable.
C. It will apply these filters to all related tables.
D. It will recalculate the measure in the PivotTable.
In the DAX calculation process, the purpose of "applying the filters to the tables in the Power Pivot data tables" is to recalculate the measure in the Measure Area.
The correct answer to the given question is option D.
Application of filters. The application of filters in the DAX calculation process is used to limit the number of rows available in the calculation of data values.
It also helps to remove irrelevant data from the model. This means that users can apply the filters to all the related tables in the model.In the DAX calculation process, once the filters are applied to the tables in the Power Pivot data tables, it will apply these filters to all related tables.
The filters are applied to the PivotTable to limit the number of rows that will be included in the calculation of data values.This means that when the filters are applied to the tables in the Power Pivot data tables, it will recalculate the measure in the Measure Area. The application of the filters ensures that the PivotTable is refreshed and recalculated to ensure that the data values are accurate.
For more such questions on DAX calculation, click on:
https://brainly.com/question/30395140
#SPJ8
in satir’s communication roles, the _____ avoids conflict at the cost of his or her integrity.
In Satir's communication roles, the "Placater" avoids conflict at the cost of his or her integrity.
Placaters' speech patterns include flattering, nurturing, and supporting others to prevent conflicts and keep harmony. They prefer to agree with others rather than express their true feelings or opinions. Placaters are also known for their tendency to apologize even when they are not at fault. They seek to please everyone, fearing that they will be rejected or disapproved of by others if they do not comply with their expectations. Placaters' fear of rejection often leads them to suppress their own emotions and ignore their needs to maintain a positive relationship with others. Therefore, Satir has given significant importance to identifying the Placater in communication roles.
Conclusion:In Satir's communication roles, the "Placater" avoids conflict by pleasing others, neglecting their own feelings and opinions. Their speech patterns include flattery and apology. They prefer to keep harmony, fearing rejection from others if they do not comply with their expectations. They suppress their emotions to maintain positive relationships with others.
To know more about Placater visit:
brainly.com/question/4116830
#SPJ11
C++:
it says arraySize must have a constant value, how do you fix this?:
#include
#include
#include
using namespace std;
int main(){
int i = 9999;
std::ostringstream sub;
sub << "0x" << std::hex << i;
std::string result = sub.str();
std::cout << result << std::endl;
int lengthOfArray = result.length();
char resultArray[lengthOfArray + 1];
strcpy(resultArray, result.c_str());
//Printing last value using index
std::cout << resultArray[lengthOfArray - 1] << endl;
}
C++ language won't allow you to use a variable to specify the size of an array, as you need a constant value to define an array's size, as described in the question. This code, on the other hand, specifies the size of an array using a variable, which is prohibited.
However, C++11 introduces the ability to define the size of an array using a variable in a different way.Let's look at a few examples:Declare an array of integers with a non-constant size, using the value of the variable x as the size. The size is determined at runtime based on user input.#include int main() { int x; std::cin >> x; int* array = new int[x]; // use the array delete[] array; }Or use a compile-time constant expression (e.g. constexpr or const int), such as:#include constexpr int ARRAY_SIZE = 10; int main() { int array[ARRAY_SIZE]; // use the array }
The C++11 standard defines a new array type named std::array that can be used as an alternative to C-style arrays. std::array is a fixed-size container that encapsulates a C-style array. It uses templates and provides a variety of advantages over C-style arrays.
To know more about C++ language visit:
brainly.com/question/33172311
#SPJ11
np means a number n to a power p. Write a function in Java called power which takes two arguments, a double value and an int value and returns the result as double value
To write a function in Java called power that takes two arguments, a double value and an int value and returns the result as a double value, we need to use the Math library which is built into the Java programming language.
Here's the code snippet:
import java.lang.Math;
public class PowerDemo {
public static double power(double n, int p) {
return Math.pow(n, p);
}
}
The above code snippet imports the Math library using `import java.lang.Math;`.
The `power` function takes two arguments:
a double value `n` and an int value `p`.
Inside the `power` function, we use the `Math.pow` function to calculate the power of `n` to `p`.
The `Math.pow` function returns a double value and we return that value from the `power` function.
To know more about Java programming language visit:
https://brainly.com/question/10937743
#SPJ11
You have to create a game namely rock, paper, scissors in the c language without using arrays, structures, and pointers.
use stdio.h library and loops statements. please give an explanation of code.
1) Both of the players have to type their choice, such as R, S, P. R represents rock, S represents Scissors, P represents paper.
2) If the chosen values are not appropriate type (error) and ask to retype the value again, additionally if the values are the same, ask to retype the choice again.
3) At the end, the program has to print the winner, and ask them to play a game again by typing (yes/Y) or any other value that means no and the game ends.
Rock, paper, scissors game in C language using loops statementsThe rock, paper, scissors game is a game that can be played between two players. In this game, the players have to type their choice, such as R, S, P. R represents rock, S represents Scissors, P represents paper.Here is the code for the game in C language:long answer
The game’s loop will run until the user types an incorrect input or chooses to end the game (when a player enters a value that is not equal to ‘y’ or ‘Y’).Step 1: Create the necessary libraries#include Step 2: Declare the main functionint main(){ // your code goes here }Step 3: Define the necessary variableschar user1; char user2; int flag = 0; char playAgain;Step 4: Start the game loopdo { // your code goes here } while (playAgain == 'y' || playAgain == 'Y');Step 5: Request user inputsprintf("Player 1 enter your choice (R, P, or S): ");
scanf(" %c", &user1); printf("Player 2 enter your choice (R, P, or S): "); scanf(" %c", &user2);Step 6: Check if the inputs are valid and ask for reentry if they are invalidif ((user1 != 'R' && user1 != 'S' && user1 != 'P') || (user2 != 'R' && user2 != 'S' && user2 != 'P')) { printf("Invalid choice. Please try again.\n"); flag = 1; } else if (user1 == user2) { printf("It's a tie. Please try again.\n"); flag = 1; }Step 7: Determine the winner and print the resultif (flag == 0) { if ((user1 == 'R' && user2 == 'S') || (user1 == 'P' && user2 == 'R') || (user1 == 'S' && user2 == 'P')) { printf("Player 1 wins!\n"); } else { printf("Player 2 wins!\n"); } printf("Do you want to play again? (y/n): "); scanf(" %c", &playAgain); flag = 0; }Step 8: End the game loop and exit the program}while (playAgain == 'y' || playAgain == 'Y');return 0;}
To know more about language visit:
brainly.com/question/33563444
#SPJ11
If the player chooses to play again, the loop continues. If the player chooses not to play again, the game stats are printed and the program exits.
Here is the code to create a Rock, Paper, Scissors game in the C language without using arrays, structures, and pointers:```
#include
#include
#include
int main() {
char player_choice, computer_choice;
int player_win_count = 0, computer_win_count = 0, tie_count = 0, game_count = 0;
char play_again = 'y';
printf("Welcome to the Rock, Paper, Scissors game!\n\n");
while (play_again == 'y' || play_again == 'Y') {
printf("Choose (R)ock, (P)aper, or (S)cissors: ");
scanf(" %c", &player_choice);
// convert lowercase to uppercase
if (player_choice >= 'a' && player_choice <= 'z') {
player_choice -= 32;
}
// validate input
while (player_choice != 'R' && player_choice != 'P' && player_choice != 'S') {
printf("Invalid input. Please choose (R)ock, (P)aper, or (S)cissors: ");
scanf(" %c", &player_choice);
if (player_choice >= 'a' && player_choice <= 'z') {
player_choice -= 32;
}
}
// generate computer choice
srand(time(NULL));
switch (rand() % 3) {
case 0:
computer_choice = 'R';
printf("Computer chooses rock.\n");
break;
case 1:
computer_choice = 'P';
printf("Computer chooses paper.\n");
break;
case 2:
computer_choice = 'S';
printf("Computer chooses scissors.\n");
break;
}
// determine winner
if (player_choice == computer_choice) {
printf("Tie!\n");
tie_count++;
} else if ((player_choice == 'R' && computer_choice == 'S') || (player_choice == 'P' && computer_choice == 'R') || (player_choice == 'S' && computer_choice == 'P')) {
printf("You win!\n");
player_win_count++;
} else {
printf("Computer wins!\n");
computer_win_count++;
}
// increment game count
game_count++;
// ask to play again
printf("\nDo you want to play again? (Y/N): ");
scanf(" %c", &play_again);
}
// print game stats
printf("\nGame stats:\n");
printf("Total games: %d\n", game_count);
printf("Player wins: %d\n", player_win_count);
printf("Computer wins: %d\n", computer_win_count);
printf("Ties: %d\n", tie_count);
return 0;
}
```The game starts by welcoming the player and then entering a while loop that continues as long as the player wants to play again. Inside the loop, the player is prompted to choose either rock, paper, or scissors, and their input is validated. If the input is not valid, the player is prompted to enter a valid input. If the player's and the computer's choices are the same, the game is tied. If the player wins, the player's win count is incremented. If the computer wins, the computer's win count is incremented. At the end of the game, the player is asked if they want to play again.
To know more about loop continues visit:-
https://brainly.com/question/19116016
#SPJ11
Singlechoicenpoints 9. Which of the following refers to a type of functions that I defined by two or more function. over a specified domain?
The range of the inner function is restricted by the domain of the outer function in a composite function.The output of one function is utilized as the input for another function in a composite function.
The type of functions that are defined by two or more function over a specified domain is called composite functions. What are functions? A function is a special type of relation that pairs each element from one set to exactly one element of another set. In other words, a function is a set of ordered pairs, where no two different ordered pairs have the same first element and different second elements.
The set of all first elements of a function's ordered pairs is known as the domain of the function, whereas the set of all second elements is known as the codomain of the function. Composite Functions A composite function is a function that is formed by combining two or more functions.
To know more about domain visit:
brainly.com/question/9171028
#SPJ11