Answer:
Writing of a story that ends with the character becoming poor with no friends.
Explanation:
There was a young girl who believed that all things revolve around her. She had the money, the power, the family, and the beauty to ensure she was the center of attention. She would always be the main focus, everywhere she goes.
But there came a time when she had a major misfortune. Her family had come upon unfortunate times. They are going to lose their money and may even be jailed for embezzlement. It was true that she had no idea what her parents had done but she was also so familiar with the 'princess' lifestyle that she did not know how to downgrade her lifestyle. And so, when this misfortune happened, she was unsure how to react. She also assumed that her friends will be there for her. Little did she know everyone was just after her wealth and influence and had nothing to do with genuine friendship.
In a few months, their family position moved from top to bottom, which everyone found hard to accept. She had to maintain her status while at the same time try to live up with that without losing her circle. But as rumors spread fast and she wasn't able to spend the way she would normally send, she eventually experienced a dwindled friend circle. And in about a year, she had lost all of her friends, couldn't even convince someone to stay with her faithfully and worse of all, she was also poor, the very status she had degradingly taunted other people with.
A box is dragged across a floor by pulling on a rope attached to the crate and inclined 25 o above the horizontal. If the coefficient of static friction is 0.64, it requires a force of 350 N to just start it moving. What is the mass of the box
Answer:
[tex]m=35.58 kg[/tex]
Explanation:
Using the first Newton's equation
[tex]\Sum F_{T}=F-mgsin(25)-\mu mgcos(25)=0[/tex]
We just need to solve it for m:
[tex]m=\frac{F}{g(sin(25)+\mu cos(25))}[/tex]
[tex]m=\frac{350}{9.81(sin(25)+0.64cos(25))}[/tex]
[tex]m=35.58 kg[/tex]
I hope it helps you!
A car of mass 800 kg is moving at a uniform velocity of 72 km/hr. Find its
momentum.
[Ans: 16000 kgm/s)
A body of mass 5 kg has momentum of 125 kg m/s. Find the velocity of the body
in motion.
[Ans: 25 mls)
Answer:
hope its helpful to uh...
What is the overall charge of the wall?
Answer:
The overall charge on the wall is zero.
Explanation:
Because the atoms making the wall are neutral i.e. number of positive charges are equal to number of negative charges.
Two straight, parallel wires a and b carry currents in opposite directions, and are separated by a distance d. The magnitude of the force exerted by each wire on a segment of length L of the other wire is F. The vector sum of these forces is
Answer:
Zero
Explanation:
The magnetic field due to the first wire on the second wire with current i₁ in the first wire at a distance d from the second wire is B₁ = μ₀i₁/2πd.
The magnetic force due to this field on the second wire of length segment, L and current i₂ is F₁ = Bi₂L = (μ₀i₁/2πd)i₂L = μ₀i₁i₂L/2πd = F
The magnetic field due to the second wire on the first wire with current i₂ in the first wire at a distance d from the second wire is B₂ = μ₀i₂/2πd.
The magnetic force due to this field on the first wire of length segment, L and current i₁ is F₂ = Bi₁L = (μ₀i₂/2πd)i₁L = μ₀i₁i₂L/2πd = F
Since their magnetic fields are in opposite directions, according to the right hand rule, their forces would also be in opposite directions.
So F₁ = F and F₂ = -F
So their vector sum F₁ + F₂ = F +(-F) = F - F = 0
Three 15.0-W resistors are connected in parallel across a 30.0-V battery. Please show all work.
a) Find the current through each branch of the circuit.
b) Find the equivalent resistance of the circuit.
c) Find the current through the battery.
Answer:
Part A)
Since all of the resistors have equal resistance, hence for finding even only 1 branch It will be fine because current will be the same for all branches.
=> [tex]I = \frac{V}{R_{1} }[/tex]
=> [tex]I = \frac{30}{15}[/tex]
=> I = 2 A
Part B)
Equivalent resistance for parallel circuits is the sum of reciprocals of each resistor.
=> [tex]\frac{1}{R} = \frac{1}{R_{1}}+\frac{1}{R_{2}} +\frac{1}{R_{3}}[/tex]
=> [tex]\frac{1}{R} = \frac{1}{15}+ \frac{1}{15}+\frac{1}{15}[/tex]
=> [tex]\frac{1}{R} = \frac{3}{15}[/tex]
=> R = 15/3
=> R = 5 ohms
Part C)
I = V/R
Where I is current, V is voltage and R is the equivalent resistance
=> I = 30/5
=> I = 6 A
A vehicle traveling on wet or slick roads can begin to _________ as water forms a barrier between the road and the tires and traction is lost as the wheels start to ride on top of the water and not the road surface. a) skid b) hydroplane c) lose traction d) splash water on to the engine
Answer: B.) HYDROPLANE
Explanation: The term hydroplane can be used to refer to a condition which usually occur during a downpour or on surfaces covered by water. It occurs when water forms a barrier or comes in between the frictional grip which occurs between the road surface and the car tyres. The contact between the car tyres and the road surface is supposed to give adequate frictional support which prevents the car from skidding or skidding uncontrollably on the road surface. However, when water comes invetween the surface, traction is lost and skidding results due to very low Coefficient of friction between the road and Tyre which was supposed to provide a firm grip between the tyres and the road surface.
When a vehicle is traveling on wet or slick roads, hydroplaning can occur. The correct answer is b) hydroplane.
When a vehicle is traveling on wet or slick roads, hydroplaning can occur. Hydroplaning happens when a layer of water builds up between the tires of the vehicle and the road surface, leading to a loss of traction.
This loss of traction can cause the vehicle to skid or slide, making it difficult to control. The tires ride on top of the water rather than maintaining contact with the road, resulting in reduced traction and control of the vehicle.
Therefore, When a vehicle is traveling on wet or slick roads, hydroplaning can occur. The correct answer is b) hydroplane.
To know more about hydroplaning:
https://brainly.com/question/33723980
#SPJ6
Before beginning an experiment, Mrs. Wilson warns her science class not to drop the bar magnets on the floor. What is the most likely reason for Mrs. Wilson’s warning?
Answer:
we should not drop a magnet on the floor because the magnets tend to lose magnetism gradually and become weak over a period of time if they are not stored properly.
Answer:
Well depending on the floor like say if it was a wooden floor the magnet might lose it magnetism, if concrete floor the magnetic brake and still lose it magnetism, if a metal floor the magnet would stick not sure if it wood lose it magnetism or not but the possibilities still there, basically what I'm saying is the magnet would lose its magnetism if it were to interact with the floor maybe temporary or maybe permanently.
for those with with a learning disability it's a
Explanation:
as a motorcycle takes a sharp turn the type of motion that occurs is called ——— motion
Answer:
circular motion
Explanation:
hope this helps you :)
Answer:
Centripetal motion
Explanation:
As a motorcycle takes a sharp turn the type of motion that occurs is called centripetal motion
De acuerdo al calendario ecológico 2020, escriba cuanto CO2 produce el Ecuador y en un resumen máximo de 7 líneas, determine porque son importante los humedales en la biodiversidad.
Answer:
43,919.66 Kilotones de Co2 en 2016.
Explicación:
Ecuador produce 43,919.66 Kilotones de Co2 en 2016. Las tierras húmedas son muy importantes para la biodiversidad porque proporcionan hábitat a millones de animales. Alrededor del 35 por ciento de todas las especies amenazadas y en peligro vive en estas tierras húmedas. Estas tierras húmedas son altamente productivas y tienen la capacidad de mejorar la calidad del agua, prevenir la degradación del suelo y proporcionar alimentos a los animales que viven en estas tierras húmedas.
Newton’s third law of motion says that for every action there is a(n) and opposite reaction.
Answer:
for every action thete is an equal and opposite reaction
Answer:
Newton’s third law of motion says that for every action there is a(n)
equal and opposite reaction.
Explanation:
just got it right edg 1928
I NEED HELP PLEASE, THANKS! :)
Generate an explanation for the following formula: P = I²R . Explain.
Answer:
P = VI = (IR)I = I2R
Explanation:
What the equation means is that if you double the current you end up with 4 times the power loss. It's like the area of carpet you need for a room - if you make the room twice as long and twice as wide you need 4x as much carpet. The physical explanation is that the voltage difference along a wire depends on the current - more current flowing with a resistance means more voltage (pressure of electricity if you like) is built up.
This extra voltage means more power. So if you double the current your would double the power, but you also double the voltage which doubles the power again = 4x as much power. P = VI = (IR)I = I2R
I hope this helps you out, if I'm wrong, just tell me.
As I mentioned earlier, Ohm's law gives us the formula P = IV, where V is the voltage ( also known as the electrical potential difference ) and I is the current. It is confusing that P = I²R and P = IV are one in the same - so I want to go a bit deeper on that.
We have three formulas, P = IV, P = I²R, and P = V² / R. Each are considered the same. The two formulas P = I²R, and P = V² / R are derived from the statement that P = IV, under the condition V = IR. Substitute the value of V from this second condition V = IR into P = IV. You would get the following -
P = I( IR ),
P = I²R
That is how one can derive the formula P = I²R, and how P = IV and P = I²R are thought to be one in the same. If you would like, take a look at how to get the formula " P = V² / R, "
V = IR, P = IV
I = V / R, P = IV
P = ( V / R )V,
P = V² / R
Hope that helps!
What is the magnitude of these two vectors: 101 m 60.0 degrees 85.0 m
Answer:
85.0 please I don't understand
a body starts from rest and gains the velocity of 5 metre per second into second is it of uniform velocity explain
Answer:
It is not a uniform velocity, because his velocity increases for 5 m every second (acceleration = 5m/s2), meaning his velocity always changes.
When he starts at rest, his velocity is 0 m/s. But in 1 second later, his velocity is already 5m/s. At 2 seconds, his velocity will be 10 m/s.
The speed of an electromagnetic wave is a constant, 3.0 × 108 m/s. The wavelength of a wave is 0.6 meters. What is the frequency?
Answer:
The answer to this should be: 5.0 x 10⁸ Hz
Explanation:
The speed, s, of a wave, equals the product of its frequency, ν, times its wavelength, λ:
s = νλ.
As the question states, the speed of an electromagnetic wave is a constant, c, equal to 3.0 × 10⁸ m/s.
Substituting this constant in the equation for the speed of the wave, you get:
c = νλ.
From that equation, you can solve for the frequency to show the inverse realation of frequency and wavelength:
ν = c / λ
Now, you just have to substitute values and compute, leaving you with:
5.0 x 10⁸ Hz
Q- A body is acted upon by two forces 30N due east and 40N due North. Calculate
resultant and its direction.
Answer:
the following image will make you understand
Explanation:
Swamp coolers are effective because _____.
A. the water is colder than the air.
B. the water pulls heat from the room to undergo a phase change.
C. the thermal energy of the water is decreasing.
D. the water's latent heat of vaporization is being pulled from the air.
Answer:
D. the water's latent heat of vaporization is being pulled from the air.
Explanation:
A swamp cooler also generally referred to as the evaporative cooler is an electronic device that uses moisture to cool air. This simply means that, the electronic device works on the principle of evaporation of water to cool the surrounding air.
In swamp coolers, water absorbs large amount of warm air via the evaporative wet cooler pad, so as to evaporate and consequently cooling the air effectively and efficiently.
Swamp coolers are effective because the water's latent heat of vaporization is being pulled from the air.
The latent heat of vaporization can be defined as the energy that is being absorbed by water during evaporation.
The swamp coolers are typically made up of the following essential components, these are;
1. Float.
2. Blower.
3. Pump.
4. Evaporative pad.
5. Water supply valve.
Hence, through the principle of evaporative cooling (latent heat of vaporization), swamp coolers reduces or lower the air temperature in its surroundings.
Answer:
B and D
Explanation: