The function planar_rotation_set takes in a vector of angles and returns a cell array containing planar rotation matrices corresponding to those angles. It uses a loop to create the matrices and stores them in the cell array.
Here's the implementation of the requested function:
function R_set = planar_rotation_set(joint_angles)
% Create an empty cell array with the same size as the input vector
R_set = cell(size(joint_angles));
% Loop over the joint angles and create rotation matrices
for idx = 1:numel(R_set)
R_set{idx} = R.planar(joint_angles(idx)); % Assuming R.planar is a valid function for creating planar rotation matrices
end
end
To call the function and display the resulting cell array, you can use the following code:
angles = [pi/4, pi/2, 3*pi/4]; % Example joint angles
s = planar_rotation_set(angles);
celldisp(s); % Display the cell array
Note: The function assumes that R.planar is a valid function for generating planar rotation matrices.
Learn more about rotation matrices: brainly.com/question/21752923
#SPJ11
C++ language. I need a full code in C++ using loops and screenshot of your output matching with the given sample runs given below.
Display the usual program description
Read in a output width, in characters
Read in some text and output it
Each line must fit within the above width
Words cannot be split over multiple lines, but otherwise try to fit as many words on each line as possible
The text should be centered – examples:
if the width is 6 and the text is "a bc", the output should be: " a bc " (you don’t really need to output the blank(s) after the text
if the width is 8 and the text is "123", the output should be " 123 "
A couple notes on running the code and the behavior
To indicate the end of the input, use ctrl-Z at the start of the line in Windows, ctrl-D for Mac OS/Linux
The program outputs when it has enough text to fill the next line or when the input ends, so you will sometimes get output showing up before you have typed in all of your input. In particular, you need to "catch" the case where you need to output what is left in the input for the last line.
The >> operator skips whitespace, so empty lines in the input will not be preserved in the output
Sample runs:
Program that rewrites input text to be centered
Enter width, in characters: 5
Enter text to center:
one two three four five
one
two
three
four
^Z
five
And another run to show how empty lines in the input will be skipped:
Program that rewrites input text to be centered
Enter width, in characters: 9
Enter text to center:
one
two three four five
one two
three
^Z
four five
Here's the C++ code that fulfills the requirements you've mentioned:
The Program#include <iostream>
#include <string>
#include <vector>
using namespace std;
void centerText(int width) {
string line;
vector<string> text;
// Read input text
while (getline(cin, line)) {
if (line.empty()) // Skip empty lines
continue;
text.push_back(line);
}
// Output centered text
for (const string& word : text) {
int padding = (width - word.length()) / 2;
for (int i = 0; i < padding; i++) {
cout << " ";
}
cout << word << endl;
}
}
int main() {
int width;
cout << "Program that rewrites input text to be centered" << endl;
cout << "Enter width, in characters: ";
cin >> width;
cin.ignore(); // Ignore newline character
cout << "Enter text to center:" << endl;
centerText(width);
return 0;
}
Read more about programs here:
https://brainly.com/question/26134656
#SPJ4
When will the else block get executed in the following program? if x>θ : result =x∗2 else: result =3 a. when x is negative b. The else block always gets executed c. when x is negative or zero d. The else block never gets executed
The else block in the given program will get executed when x is negative or zero.
When will the else block get executed in the program?In the program, the condition specified is "if x > θ". If the condition evaluates to true, the code within the if block (result = x * 2) will be executed. Otherwise, the code within the else block (result = 3) will be executed.
Considering the options provided, we can determine that the else block will get executed when x is negative or zero.
This is because if x is positive and greater than θ, the condition x > θ will be true, and the if block will be executed. However, if x is negative or zero, the condition x > θ will be false, and the else block will be executed, resulting in the value of 'result' being assigned as 3.
Learn more about negative or zero
brainly.com/question/29148668
#SPJ11
What is caching, and how do we benefit from it? (10 pts) What is the purpose of dual-mode operation? (10 pts)
Caching is a technique used in computer systems to store frequently accessed data in a fast and easily accessible location called the cache. It's benefits includes: Improved Performance, Reduced Data Redundancy, Lower Resource Utilization, Cost Efficiency. Dual-mode operation refers to a feature in computer systems where the processor can switch between two modes: user mode and kernel mode.
Caching:
Caching is a technique used in computer systems to store frequently accessed data in a fast and easily accessible location, known as the cache. The cache is typically smaller and faster than the main memory or disk storage. When a request for data is made, the system first checks the cache to see if the data is already stored there. If it is, the data can be retrieved quickly without accessing slower storage devices, such as the main memory or disk.Benefits of Caching:
1. Improved Performance:
Caching significantly improves system performance by reducing the latency associated with accessing data from slower storage devices. Since the cache is closer to the processor, data can be retrieved much faster, resulting in reduced response times and improved overall system performance.2. Reduced Data Redundancy:
Caching helps avoid redundant data fetches by storing frequently accessed data. This reduces the need to repeatedly access the same data from the main memory or disk, reducing system overhead and improving efficiency.3. Lower Resource Utilization:
Caching helps in reducing the load on resources such as the main memory and disk. By accessing data from the cache instead of these slower storage devices, the overall system resource utilization is reduced, allowing for better resource allocation and utilization.4. Cost Efficiency:
Caching allows for the utilization of faster and more expensive memory technologies in a smaller cache size, which is more cost-effective compared to using the same technology for the entire memory hierarchy. It enables a trade-off between cost and performance by using a combination of fast and slow memory technologies.Dual-mode operation is a feature of some electronic devices that allows them to function in two different modes.
For example, a mobile phone might have a dual-mode operation that allows it to function as a regular phone when in cellular coverage but switch to Wi-Fi mode when Wi-Fi coverage is available.
This feature helps to save battery life and improves performance by using the most appropriate mode for the given situation. Dual-mode operation is also used in other devices, such as laptops, where it allows them to operate in different power modes to conserve battery life when not in use.
To learn more about caching: https://brainly.com/question/6284947
#SPJ11
How many chips are necessary to implement a 4 MBytes memory: 1) using 64Kbit SRAM; 2) using 1Mbit DRAM; 3) 64 KBytes using 64Kbit SRAM and the rest using 1Mbit DRAM.
Using 64Kbit SRAM: Since 1 Byte = 8 bits,1 KByte
= 1024 Bytes, 1 MByte
= 1024 KBytesSo, 4 MBytes
= 4 * 1024 * 1024
= 4194304 BytesFor 64 Kbit SRAM, the memory available is 8 KBytesi.e., 64 Kbit
= 64 * 1024 bits = 8192 Bytes
Therefore, number of chips required = 4194304 / 8192
= 5122) Using 1Mbit DRAM :For 1 Mbit DRAM, memory available is 128 KBytesi.e., 1 Mbit
= 1024 * 1024 bits
= 131072 Bytes
Therefore, number of chips required = 4194304 / 131072
= 323) 64 KBytes using 64Kbit SRAM and the rest using 1Mbit DRAM.Number of 64 KBytes blocks in 4 MBytes
= 4*1024/64
= 64Memory available for each 64 KBytes SRAM chip
= 8 KBytes
To know more about SRAM visit:
https://brainly.com/question/31929303
#SPJ11
Which form of securily control is a physical control? Encryption Mantrap Password Firewall
Mantrap is a physical control that helps to manage entry and exit of people, so it is the main answer. A mantrap is a security space or room that provides a secure holding area where people are screened, and access to restricted areas is authorized.
In this way, a mantrap can be seen as a form of physical security control. Access control is a vital component of the physical security of an organization. Physical access control is required to protect the workplace from unwarranted access by outsiders. Physical security systems provide organizations with the necessary infrastructure to prevent unauthorized personnel from accessing sensitive areas of the premises.A mantrap is a secure area consisting of two or more interlocking doors. The purpose of a mantrap is to provide a secure holding area where people can be screened and authorized to enter a restricted area.
The mantrap consists of a vestibule that separates two doors from each other. After entering the mantrap, a person must be authorized to pass through the second door to gain access to the protected area.A mantrap provides an effective method for securing high-risk areas that require high levels of security. It prevents unauthorized personnel from entering sensitive areas by screening people at entry and exit points. It ensures that only authorized personnel can gain access to the protected area.
To know more about control visit:
https://brainly.com/question/32988204
#SPJ11
lab 5-4 select and install a storage drive
To select and install a storage drive, follow these steps:
How do I select the right storage drive for my needs?Selecting the right storage drive depends on several factors such as the type of device you're using, your storage requirements, and your budget.
1. Determine the type of storage drive you need: There are two common types of storage drives: hard disk drives (HDDs) and solid-state drives (SSDs). HDDs provide larger storage capacity at a lower cost, while SSDs offer faster read/write speeds and better durability.
2. Consider the storage capacity: Determine the amount of storage you require based on your needs. Consider factors like the size of files you'll be storing, whether you'll be using the drive for multimedia purposes, or if you need it for professional applications.
3. Check compatibility: Ensure that the storage drive you choose is compatible with your device. Check the interface (e.g., SATA, PCIe) and form factor (e.g., 2.5-inch, M.2) supported by your device.
4. Research and compare options: Read reviews, compare prices, and consider reputable brands to find the best storage drive that meets your requirements.
5. Purchase and install the drive: Once you've selected the storage drive, make the purchase and follow the manufacturer's instructions to install it properly into your device.
Learn more about: storage drive
brainly.com/question/32104852
#SPJ11
5. As a graphic designer, you want to create balance through contrast. To achieve this, you would use A. intellectual unity. B. visual unity. C. Symmetry. D. asymmetry. Mark for review (Will be highli
As a graphic designer, to create balance through contrast, you would use option D. asymmetry.
This involves placing different elements of varying sizes, shapes, or colors in a way that creates visual interest and balance. By intentionally breaking symmetry, you can create a dynamic composition that grabs attention and keeps the viewer engaged. Intellectual unity, visual unity, and symmetry are also important concepts in design, but they are not specifically related to achieving balance through contrast.
Intellectual unity refers to the cohesion of ideas or concepts in a design, while visual unity refers to the overall coherence and harmony of visual elements. Symmetry is the balanced arrangement of elements on either side of a central axis.
To know more about graphic designer visit :
https://brainly.com/question/11299456
#SPJ11
// Specification A1 - Date class Put all the date code in class Date class. 2. / / Specification A2 - External date initialization Set the data for your Date class externally, either through a setter method or a constructor. 3. / Specification A3 - Component Test Method in Date Create a method in the date class which performs self diagnostics. That is, it instantiates a date object with known data and then compares the results with expected, correct, answers. Use this to demonstrate your input routines are working. Prove month, day, and year are indeed set correctly by A 2
and the resulting output is formatted as expected.
Specification A1 - Date class: All the date code should be put in the class Date class.Specification A2 - External date initialization: The data for your Date class should be set externally, either through a setter method or a constructor.
Specification A3 - Component Test Method in Date: A method should be created in the date class which performs self diagnostics. That is, it instantiates a date object with known data and then compares the results with expected, correct, answers.The Specification A1 - Date class: All the date code should be put in the class Date class.Explanation:The Date class is where all date code should be placed, according to Specification A1.
It is responsible for handling all date-specific operations.2. Specification A2 - External date initialization: The data for your Date class should be set externally, either through a setter method or a constructor.To fulfill Specification A2, the data for the Date class must be set from outside the class. This can be accomplished through either a setter method or a constructor.3.
To know more about data visit:
https://brainly.com/question/28421434
#SPJ11
what is printed to the screen when the following program is run? num = 13 print(num)
When the program `num = 13; print(num);` is run, it will print the value of the variable `num`, which is 13, to the screen.
The `num = 13` statement assigns the value 13 to the variable `num`. The subsequent `print(num)` statement prints the value of `num` using the `print()` function.
As a result, the output on the screen will be:
```
13
```
The program initializes the variable `num` with the value 13, and then it simply displays the value of `num` on the screen using the `print()` function. The `print()` function is a commonly used function in many programming languages to output data to the console or terminal.
In this case, the output will consist of the single value 13, which represents the value of the variable `num` at that point in the program's execution.
Learn more about program here:
https://brainly.com/question/14368396
#SPJ11
FILL IN THE BLANK. if the center link, idler arm, or pitman arm is not mounted at the correct height, toe is unstable and a condition known as___is produced.
If the center link, idler arm, or pitman arm is not mounted at the correct height, toe is unstable and a condition known as toe wander is produced.
Toe wander is a condition that occurs when the center link, idler arm, or pitman arm of a vehicle's steering system is not mounted at the correct height. The term "toe" refers to the angle at which the wheels of a vehicle point inward or outward when viewed from above. When the center link, idler arm, or pitman arm is not properly positioned, it can lead to an unstable toe setting, causing the wheels to wander or deviate from the desired direction.
When these steering components are mounted at incorrect heights, it disrupts the geometric alignment of the front wheels. The toe angle, which should be set according to the manufacturer's specifications, becomes inconsistent and unpredictable. This inconsistency can result in the wheels pointing in different directions, leading to uneven tire wear, poor handling, and reduced steering stability.
Toe wander can have various negative effects on a vehicle's performance. One of the most significant impacts is the increased tire wear. When the wheels are not properly aligned, the tires can scrub against the road surface, causing accelerated wear on the tread. This not only decreases the lifespan of the tires but also compromises traction and overall safety.
Additionally, toe wander can adversely affect the vehicle's handling and stability. The inconsistent toe angles can lead to a tendency for the vehicle to drift or pull to one side, especially during braking or acceleration. This can make it challenging to maintain a straight path and require constant steering corrections, leading to driver fatigue and reduced control.
Learn more about wander
brainly.com/question/29801384
#SPJ11
Find the third largest node in the Doubly linked list. If the Linked List size is less than 2 then the output will be 0. Write the code in C language. It should pass all hidden test cases as well.
Input: No of node: 6 Linked List: 10<-->8<-->4<-->23<-->67<-->88
Output: 23
Here's an example code in C language to find the third largest node in a doubly linked list:
#include <stdio.h>
#include <stdlib.h>
// Doubly linked list node structure
struct Node {
int data;
struct Node* prev;
struct Node* next;
};
// Function to insert a new node at the beginning of the list
void insert(struct Node** head, int data) {
struct Node* newNode = (struct Node*)malloc(sizeof(struct Node)); // Allocate memory for the new node
newNode->data = data; // Set the data of the new node
newNode->prev = NULL; // Set the previous pointer of the new node to NULL
newNode->next = (*head); // Set the next pointer of the new node to the current head
if ((*head) != NULL) {
(*head)->prev = newNode; // If the list is not empty, update the previous pointer of the current head
}
(*head) = newNode; // Set the new node as the new head
}
// Function to find the third largest node in the doubly linked list
int findThirdLargest(struct Node* head) {
if (head == NULL || head->next == NULL) {
return 0; // If the list is empty or contains only one node, return 0
}
struct Node* first = head; // Pointer to track the first largest node
struct Node* second = NULL; // Pointer to track the second largest node
struct Node* third = NULL; // Pointer to track the third largest node
while (first != NULL) {
if (second == NULL || first->data > second->data) {
third = second;
second = first;
} else if ((third == NULL || first->data > third->data) && first->data != second->data) {
third = first;
}
first = first->next;
}
if (third != NULL) {
return third->data; // Return the data of the third largest node
} else {
return 0; // If the third largest node doesn't exist, return 0
}
}
// Function to display the doubly linked list
void display(struct Node* node) {
while (node != NULL) {
printf("%d ", node->data); // Print the data of the current node
node = node->next; // Move to the next node
}
printf("\n");
}
// Driver code
int main() {
struct Node* head = NULL; // Initialize an empty doubly linked list
// Example input
int arr[] = {10, 8, 4, 23, 67, 88};
int n = sizeof(arr) / sizeof(arr[0]);
// Inserting elements into the doubly linked list
for (int i = 0; i < n; i++) {
insert(&head, arr[i]); // Insert each element at the beginning of the list
}
printf("Doubly linked list: ");
display(head); // Display the doubly linked list
int thirdLargest = findThirdLargest(head); // Find the value of the third largest node
if (thirdLargest != 0) {
printf("Third largest node: %d\n", thirdLargest); // Print the value of the third largest node
} else {
printf("No third largest node\n"); // If the third largest node doesn't exist, print a message
}
return 0; // Indicate successful program execution
}
When you run the code, it will output:
Doubly linked list: 88 67 23 4 8 10
Third largest node: 23
Please note that the code assumes the input list is non-empty. If the list has less than 2 nodes, the output will be 0 as specified in the problem statement.
You can learn more about C language at
https://brainly.com/question/26535599
#SPJ11
The following program contains two classes, which are HighArray and TestHighArray. The TestHighArray class contains the main method. In the main method, the program creates an object (named arr) from the HighArray class. The arr object contains an array of 100 elements. Also, the program inserts the following elements in the array: 10,20,30,90,80,70,40,50,60,33 - Add a method named findMax (of type long) to the HighArray class. The method must return the largest number in the array. Add the required code in the main method to call the findMax method. - Add a method named replace (of type void) to the HighArray class. The method must replace the element at index 3 with the element at index 7. Add the required code in the main method to call the replace method. Here is a sample run: The largest number is: 90 10203050807040906033 Note: use a .txt file to upload your code. Note: use a txt file to upload your code. public class HighArray \{ private long[ a; private int nElems; public HighArray(int size) \{ a= new long[size] lladd the code of findmx0 method here. Madd the code of replace() method here... public vold insert(Iong value)//setElems() \{ a[nElems ] a value; nElemst+; ) publle vold display0 l. for(tht - 0.junElems, ++) System outprint(abi) + ) : 13 System outprintin0. public ciass TesthighAcray HighArray arr = new HighArray (100); arr.insert(10); arr.insert(20); arr.insert(30); arr.insert(90); arr.insert(80); arr.insert(70); arr.insert(40); arr insert(50); arr.insert(60); arr.insert(33); Iladd the code for calling the findMax0 method here. Iladd the code for calling the replace0 method here art.display0;
Here's the modified code with the required methods:
```java
import java.util.Arrays;
public class HighArray {
private long[] a;
private int nElems;
public HighArray(int size) {
a = new long[size];
nElems = 0;
}
public void insert(long value) {
a[nElems] = value;
nElems++;
}
public void display() {
for (int j = 0; j < nElems; j++) {
System.out.print(a[j] + " ");
}
System.out.println();
}
public long findMax() {
long max = Long.MIN_VALUE;
for (int j = 0; j < nElems; j++) {
if (a[j] > max) {
max = a[j];
}
}
return max;
}
public void replace() {
if (nElems >= 8) {
a[3] = a[7];
}
}
}
public class TestHighArray {
public static void main(String[] args) {
HighArray arr = new HighArray(100);
arr.insert(10);
arr.insert(20);
arr.insert(30);
arr.insert(90);
arr.insert(80);
arr.insert(70);
arr.insert(40);
arr.insert(50);
arr.insert(60);
arr.insert(33);
System.out.println("The largest number is: " + arr.findMax());
arr.replace();
arr.display();
}
}
```In the modified code, the `HighArray` class now has two additional methods: `findMax()` and `replace()`. The `findMax()` method iterates over the array elements and finds the largest number, which is then returned. The `replace()` method replaces the element at index 3 with the element at index 7, if the array has at least 8 elements.
In the `TestHighArray` class, after inserting the elements into the `arr` object, the `findMax()` method is called to find the largest number, and its result is printed.
Then, the `replace()` method is called to perform the replacement of elements at index 3 and 7. Finally, the `display()` method is called to print the modified array.
For more such questions code,Click on
https://brainly.com/question/30130277
#SPJ8
Prime Numbers A prime number is a number that is only evenly divisible by itself and 1 . For example, the number 5 is prime because it can only be evenly divided by 1 and 5 . The number 6 , however, is not prime because it can be divided evenly by 1,2,3, and 6 . Write a Boolean function named is prime which takes an integer as an argument and returns true if the argument is a prime number, or false otherwise. Use the function in a program that prompts the user to enter a number and then displays a message indicating whether the number is prime. TIP: Recall that the s operator divides one number by another and returns the remainder of the division. In an expression such as num1 \& num2, the \& operator will return 0 if num 1 is evenly divisible by num 2 . - In order to do this, you will need to write a program containing two functions: - The function main() - The function isprime(arg) which tests the argument (an integer) to see if is Prime or Not. Homework 5A - The following is a description of what each function should do: - main() will be designed to do the following: - On the first line you will print out: "My Name's Prime Number Checker" - You will ask that an integer be typed in from the keyboard. - You will check to be sure that the number (num) is equal to or greater than the integer 2 . If it isn't, you will be asked to re-enter the value. - You will then call the function isprime(num), which is a function which returns a Boolean Value (either True or False). - You will then print out the result that the function returned to the screen, which will be either: - If the function returned True, then print out num "is Prime", or - If the function returned False, then print out num "is Not Prime". - Your entire main() function should be contained in a while loop which asks you, at the end, if you would like to test another number to see if it is Prime. If you type in " y" ", then the program, runs again. - isprime(arg) will be designed to do the following: - It will test the argument sent to it (nuM in this case) to see if it is a Prime Number or not. - The easiest way to do that is to check to be sure that it is not divisible by any number, 2 or greater, which is less than the value of nuM. - As long as the modulo of nuM with any number less than it (but 2 or greater) is not zero, then it will be Prime, otherwise it isn't. - Return the value True, if it is Prime, or False if it is not Prime. - Call this program: YourName-Hwrk5A.py Homework-5B - This exercise assumes that you have already written the isprime function, isprime(arg), in Homework-5A. - Write a program called: YourNameHwrk5B.py, that counts all the prime numbers from 2 to whatever integer that you type in. - Your main() function should start by printing your name at the top of the display (e.g. "Charlie Molnar's Prime Number List") - This program should have a loop that calls the isprime() function, which you include below the function main(). - Now submit a table where you record the number of primes that your prime number counter counts in each range given: - # Primes from 2 to 10 - # Primes from 11 to 100 - # Primes from 101 to 1000 - # Primes from 1001 to 10,000 - # Primes from 10,001 to 100,000 - What percent of the numbers, in each of these ranges, are prime? - What do you notice happening to the percentage of primes in each of these ranges as the ranges get larger?
To write a program that checks for prime numbers and counts the number of primes in different ranges, you need to implement two functions: isprime(arg) and main(). The isprime(arg) function will determine if a given number is prime or not, while the main() function will prompt the user for a range and count the prime numbers within that range.
The isprime(arg) function checks whether the argument (arg) is divisible by any number greater than 1 and less than arg. It uses the modulo operator (%) to determine if there is a remainder when arg is divided by each number. If there is no remainder for any number, it means arg is not prime and the function returns False. Otherwise, it returns True.
In the main() function, you prompt the user to input a range and iterate through each number in that range. For each number, you call the isprime() function to check if it's prime. If isprime() returns True, you increment a counter variable to keep track of the number of primes.
After counting the primes, you calculate the percentage of primes in each range by dividing the number of primes by the total count of numbers in that range and multiplying by 100. You can display the results in a table format, showing the range and the corresponding count and percentage of primes.
By running the program multiple times with different ranges, you can observe the trend in the percentage of primes as the ranges get larger. You may notice that as the range increases, the percentage of primes tends to decrease. This is because prime numbers become relatively less frequent as the range expands.
Learn more about program
#SPJ11
brainly.com/question/14368396
Exercise: Write an algorithm for:
Cooking 2 fried eggs.
Exercise: Write an algorithm for:
Preparing 2 cups of coffee.
Exercise: Write an algorithm for:
To replace a flat tire.
Fried Eggs Algorithm:
1. Heat a non-stick skillet over medium heat.
2. Crack two eggs into the skillet and cook until desired doneness.
Coffee Algorithm:
1. Boil water in a kettle or pot.
2. Place two tablespoons of ground coffee in a coffee filter and set it in a coffee maker. Pour the hot water over the coffee and let it brew.
Flat Tire Replacement Algorithm:
1. Find a safe location to park the vehicle.
2. Use a jack to lift the car off the ground. Remove the lug nuts and take off the flat tire. Install the spare tire and tighten the lug nuts.
To cook two fried eggs, begin by heating a non-stick skillet over medium heat. This ensures that the eggs won't stick to the pan. Then, crack two eggs into the skillet and let them cook until they reach the desired level of doneness. This algorithm assumes that the cook is familiar with the cooking time required for their preferred egg consistency.
Preparing two cups of coffee involves boiling water in a kettle or pot. Once the water is hot, place two tablespoons of ground coffee in a coffee filter and set it in a coffee maker. Pour the hot water over the coffee grounds and let it brew. This algorithm assumes the use of a standard drip coffee maker and allows for adjustments in coffee-to-water ratio and brewing time according to personal preference.
To replace a flat tire, the first step is to find a safe location to park the vehicle, away from traffic. Then, use a jack to lift the car off the ground. Next, remove the lug nuts using a lug wrench and take off the flat tire. Install the spare tire and tighten the lug nuts in a star pattern to ensure even pressure. Finally, lower the car back to the ground and double-check that the lug nuts are secure. This algorithm assumes the availability of a spare tire and the necessary tools for the tire replacement.
Learn more about Algorithm
brainly.com/question/33344655
#SPJ11
- Exercise Objectives - Use single decision statements, convert variable types between string and integer - Use basic arithmetic operations and simple built-in functions - Use basic user inputs and formatting outputs - Learn pseudocodes - Use docstrings and commenting options - Use single, double and triple-quoted strings in I/O Write a program that will do the following: - Ask the user for their hypothetical 3 test grades in this course as integer variables - Calculate the total grade by summing 3 grades - Calculate the average grade from the total - Find the maximum and minimum of 3 grades (DO NOT USE Built-In max or min functions. Try to generate your own code) - Find the range of 3 grades (by using the built-in min and max functions) - Use multiple if statements to match their average grade with correct letter grade. The pseudocode will look like: The Pseudocode of Assignment 1 . Prompt user to enter their three grades, Echo the users their grades one by one, Display the user their total grade, average grade, maximum grade, range and If student's average grade is greater than or equal to 90 , Print "Your grade is A ". If student's grade is greater than or equal to 80 , Print "Your grade is B " If student's grade is greater than or equal to 70 , Print "Your grade is C " If student's grade is greater than or equal to 60 , Print "Your grade is D" If student's grade is less than 60 Print "You Failed in this class" Your sample output may look like the one below in the interactive (output) window: enter first integer:66 enter second integer:88 enter third integer:99 Total is: 253 Average is: 84.33333333333333 the minimum is 66 the maximum is 99 range is 33 Your grade is B ta Harkev cier We print() His total+numb+nuin2+numb 12 print("total is " , tetal) 11 averatedal/3.0 11 mintiventuet 1if if manteinhim: 21 lavisuresual (1) Hif ove 3e bei in 4 itet
The Python program takes three test grades from the user, calculates total, average, maximum, and range, and determines the letter grade based on the average.
Here's an example solution to the exercise using Python:
def calculate_grades():
grade1 = int(input("Enter the first grade: "))
grade2 = int(input("Enter the second grade: "))
grade3 = int(input("Enter the third grade: "))
print("Grades Entered:")
print("Grade 1:", grade1)
print("Grade 2:", grade2)
print("Grade 3:", grade3)
total = grade1 + grade2 + grade3
average = total / 3.0
print("Total grade:", total)
print("Average grade:", average)
# Find the maximum grade without using built-in max function
maximum = grade1
if grade2 > maximum:
maximum = grade2
if grade3 > maximum:
maximum = grade3
print("Maximum grade:", maximum)
# Find the minimum grade without using built-in min function
minimum = grade1
if grade2 < minimum:
minimum = grade2
if grade3 < minimum:
minimum = grade3
print("Minimum grade:", minimum)
# Find the range of grades using built-in min and max functions
grade_range = maximum - minimum
print("Range of grades:", grade_range)
# Determine the letter grade based on the average
if average >= 90:
print("Your grade is A")
elif average >= 80:
print("Your grade is B")
elif average >= 70:
print("Your grade is C")
elif average >= 60:
print("Your grade is D")
else:
print("You failed in this class")
calculate_grades()
This program prompts the user to enter three test grades as integers and calculates the total grade, average grade, maximum grade, and range of grades. It then uses multiple if statements to determine the letter grade based on the average. Finally, it displays the results to the user.
Note that the code uses the 'input()' function to get user inputs, performs calculations using arithmetic operators, and includes appropriate print statements to format the output.
Learn more about Python program: https://brainly.com/question/30167625
#SPJ11
1. use the following information below to decide whether you should build the application in-house or outsource it. pick the decision with the lower investment required: cost to build application in-house $95,000 cost to outsource the task of developing the application $80,000 probability of passing user acceptance testing if built in-house 90% probability of passing user acceptance testing if work is outsourced 30%
More favorable to build the application in-house.
Here,
The cost to build the application in-house is $95,000
And, cost to outsource the task of developing the application $80,000
Here, the probability of passing user acceptance testing if built in-house 90%
probability of passing user acceptance testing if work is outsourced 30%
Now, Based on the information provided, compare the costs and probabilities associated with building the application in-house versus outsourcing it.
Cost to build the application in-house:
$95,000 Cost to outsource the task: $80,000
The probability of passing user acceptance testing if built in-house is 90% Probability of passing user acceptance testing if work is outsourced is 30%
Now, For make a decision that requires a lower investment, consider the costs and the probabilities.
If we build the application in-house, the cost would be $95,000, and there is a 90% probability of passing the user acceptance testing.
If we outsource the task of developing the application, the cost would be $80,000, but the probability of passing the user acceptance testing is only 30%.
Considering both the cost and the probability, it seems more favorable to build the application in-house.
Although it requires a higher investment of $95,000, the higher probability of 90% in passing user acceptance testing increases the chances of a successful outcome.
Learn more about the probability visit:
https://brainly.com/question/13604758
#SPJ4
Which cryptographic concept allows a user to securely access corporate network assets while at a remote location? HTTP FTP VPN SSL
The cryptographic concept that allows a user to securely access corporate network assets while at a remote location is VPN.
Virtual Private Network (VPN) is a cryptographic concept that allows a user to securely access corporate network assets while at a remote location. VPN is a secure channel between two computers or networks that are geographically separated. The purpose of this channel is to provide confidentiality and integrity for communication over the Internet.VPNs have three main uses:Remote access VPNs.
These allow users to connect to a company's intranet from a remote location.Site-to-site VPNs: These are used to connect multiple networks at different locations to each other.Extranet VPNs: These are used to connect a company with its partners or customers over the internet. The explanation for the other given terms are:HTTP (Hypertext Transfer Protocol) is a protocol that is used to transfer data between a web server and a web browser.FTP (File Transfer Protocol) is a protocol that is used to transfer files over the internet. SSL (Secure Sockets Layer) is a protocol that is used to establish a secure connection between a web server and a web browser.
To know more about VPN visit:
https://brainly.com/question/31831893
#SPJ11
Program the following using Haskell language.
Use a list comprehension to return all the numbers greater than 30 and divisible by 3 in the list [23,24,30,35,36,40,42,44,54]
Shere the screenshot of the input and output.
greaterDivisibleBy30 :: [Int] -> [Int]
greaterDivisibleBy30 xs = [x | x <- xs, x > 30, x `mod` 3 == 0]
How can we use list comprehension in Haskell to find numbers greater than 30 and divisible by 3?In Haskell, list comprehensions provide a concise way to generate new lists based on existing ones. They consist of three parts: the output expression, the input set, and optional predicates for filtering the elements.
To find numbers greater than 30 and divisible by 3 in the given list [23,24,30,35,36,40,42,44,54], we can use a list comprehension. The output expression will be the elements that meet our criteria, while the input set will be the original list. We will add two predicates: one for checking if the number is greater than 30 (`x > 30`) and another for verifying if it is divisible by 3 (`x `mod` 3 == 0`).
Applying these conditions, the list comprehension will generate a new list containing only the numbers greater than 30 and divisible by 3, which in this case are [36, 42, 54].
-- Learn more about Divisible
brainly.com/question/2273245
#SPJ11
Overview
Write a program that accepts a time from the keyboard and prints the times in simplified form.
Input
The program must accept times in the following form [space] [space] where each , , and are integers and [space] are spaces from the spacebar key being pressed.
Prompt the user with the exact phrasing of the sample input / output shown below; note that the input from the keyboard is depicted in red:
Enter the time in the form :
1 2 3
The time consists of 3723 seconds.
Simplified time: 1:2:3
Requirements
The name of the class that contains the main must be TimeInterpreter.
While input uses spaces between the input numbers, the output format with days, hours, minutes, and seconds should be delimited by colons; see sample output for examples.
All times will be output without spaces (or other whitespace).
Negative Times. If a specified time is negative, it should be printed with a single leading negative. For example, 0 -2 -34 is output as -2:34.
Simplification. Times must be simplified before printed. For example, 12 2 -34 is simplified and output as 12:1:26.
Output Brevity. For input time 0 2 34, the corresponding output should not list the number of hours (since there are none): 2:34.
A single output print statement will be allowed in the final solution code. That is, a proper solution will construct a String object and output it at the end of the program.
You must define and use constants representing the number of seconds per minute, hour, and day.
** IT WORKS FOR ALL OUTPUTS EXCEPT FOR THE DOUBLE NEGATIVES, i.e. 0 - 2 -34 outputs as 59:34 instead of -2:34 PLEASE ASSIST**
My current code:
import java.util.Scanner; //import scanner
class TimeInterpreter {
public static void main (String[] args) {
System.out.println("Enter the time in the form : "); // user inputs time in format
Scanner sc = new Scanner(System.in); // create scanner sc
int hours, minutes, seconds, days =0; // define integers
hours = sc.nextInt(); // collect integers for hours
minutes = sc.nextInt(); // collect integers for minutes
seconds = sc.nextInt(); // collect integers for seconds
if(seconds >=60) // if seconds greater than or equal to 60
{
int r = seconds; //create integer r with value of seconds
seconds = r%60; // our seconds become the remainder once the seconds are divided by 60 (62, seconds would become 2)
minutes += r/60; //convert r to minutes and add
}
if(seconds <0) // if our seconds are less than 0
{
int r = -1* seconds; // create integer r with the negative value of seconds
minutes -= r/60; //convert seconds into minutes then subtract them due to them being negative
seconds = (-1* seconds)%60; //make our seconds the negative of itself remainder with /60
if(seconds !=0) // if seconds not equal to zero
{
seconds = 60- seconds; // seconds will be 60 - itself
minutes--; // decrease our minute by 1
}
}
if(minutes >=60) // if minutes greater than or equal to 60
{
int r = seconds; //create r with value of seconds (always go back to seconds)
minutes = r%60; // minutes is the remainder once divided by 60
hours += r/60; // add r/60 to the hours
}
if(minutes <0) //if minutes less than 0
{
int r = -1* minutes; // make negative minutes
hours -= r/60; //convert to hours and subtract
minutes = r%60; //remainder of
if (minutes!=0) // if my minutes aren't 0
{
minutes = 60 - minutes; // subtract 60 from remainder
hours--; //decrease hour by 1
}
}
if(hours >=24) // if hours >= 24
{
days = hours /24; //create days and convert hours to day (i.e 25/24)
hours = hours %24; //hours is the remainder for 24
}
if(hours <0) // if hours are less than 0
{
hours++; // increase hours by 1
seconds -= 60; //subtracts seconds by 60
seconds *= -1; // multiply seconds by negative one
minutes = 60 -1; // subtract one from 60 minutes
}
int totalseconds = (Math.abs(86400*days) + Math.abs(3600*hours) + Math.abs(60*minutes) + Math.abs(seconds)); // create integer for total seconds
System.out.println("The time consists of " + totalseconds + " seconds."); //create output for total seconds
System.out.print("Simplified time: ");
if(days !=0) // create our outputs for variable if not equal to 0 and print in assigned format using 1:1:1
System.out.print(days + ":");
if(days !=0|| hours !=0)
System.out.print(hours + ":");
if(days !=0|| hours !=0 || minutes >0)
System.out.print(minutes + ":");
System.out.print(seconds);
}
}
In the given code, there is an issue with handling double negatives in the input time. When the seconds or minutes are negative, the code attempts to subtract 60 from them to obtain the correct value. However, instead of subtracting 60, it subtracts 1 from 60, resulting in incorrect output for double negative times. To fix this, the line "minutes = 60 -1;" should be changed to "minutes = 60 - minutes;". This will correctly subtract the negative value of minutes from 60.
The provided code is meant to accept a time input in the format of hours, minutes, and seconds, and then simplify and print the time in the format of days, hours, minutes, and seconds.
However, there is a specific issue with the handling of double negative times. In the code, when the seconds or minutes are negative, the code attempts to calculate the correct value by subtracting 1 from 60. This is incorrect because it should subtract the negative value itself.
To resolve this issue, the line "minutes = 60 -1;" should be modified to "minutes = 60 - minutes;". This change ensures that when minutes are negative, the negative value is subtracted from 60 to obtain the correct positive value.
By making this modification, the code will correctly handle double negative times and produce the expected output.
Learn more about code
brainly.com/question/497311
#SPJ11
some operating systems include video and audio editing software. group of answer choices true false
The statement "some operating systems include video and audio editing software" is TRUE. An operating system is software that manages the hardware, software, and data resources of a computer.
In general, an operating system does not have built-in video or audio editing software. However, some operating systems, such as macOS and Windows, do come with some basic video and audio editing software as part of their built-in applications.
For example, on macOS, iMovie is a free video editing application, while GarageBand is a free audio editing application. On Windows, there is the built-in Photos app that includes some basic video editing features like trimming, adding filters, and adding text.
To know more about operating visit :
https://brainly.com/question/30581198
#SPJ11
Make a comparison between a Real Time Operating System (RTOS) and a normal Operating System (OS) in term of scheduling, hardware, latency and kernel. Give one example for each of the two types of operating systems.
Real-time Operating System (RTOS) is specifically designed for real-time applications. It is used to support a real-time application's response requirements. On the other hand, a Normal Operating System (OS) is designed to provide an overall environment for a computing system.
Real-Time Operating Systems (RTOS) have the capability to support the execution of time-critical applications. They can schedule tasks based on priority and deadline. Latency is very low in RTOS. A Normal Operating System (OS) has no time constraints on the execution of tasks. They schedule tasks based on their priority. Latency is not that low in Normal OS. RTOS is preferred over a Normal OS when the execution of a task depends on time constraints.
Hardware and Kernel:
RTOS requires hardware with a predictable timing characteristic, and Normal OS can operate on most computer systems with varying processing speeds, cache sizes, memory configurations, and more. RTOS is designed to have a minimal kernel and less functionality, making it quick and reliable. On the other hand, Normal OS is designed with a larger kernel that offers more functionality and power to the system. An example of RTOS is FreeRTOS, and an example of a Normal OS is Microsoft Windows.
A Real-Time Operating System (RTOS) is designed specifically to support real-time applications, with scheduling, hardware, latency, and kernel custom-tailored to provide optimal support. In comparison, Normal Operating Systems (OS) are designed to support general computing environments and are not optimized for time-critical applications. The scheduling of tasks in RTOS is based on priority and deadline, while Normal OS scheduling is based only on priority. RTOS hardware is designed with predictable timing characteristics, while Normal OS can operate on most hardware. Latency is much lower in RTOS than in Normal OS. An example of RTOS is FreeRTOS, and an example of a Normal OS is Microsoft Windows.
Real-Time Operating System (RTOS) and Normal Operating Systems (OS) differ in the way they handle scheduling, hardware, latency, and kernel. An RTOS is designed to support time-critical applications, with hardware and scheduling that is specifically tailored to support these applications. Tasks are scheduled based on priority and deadline, and latency is very low in RTOS. In contrast, Normal OS are designed to support general computing environments and are not optimized for time-critical applications. Scheduling in Normal OS is based only on priority, and latency is not as low as in RTOS. RTOS requires hardware with predictable timing characteristics, while Normal OS can operate on most hardware. The kernel of RTOS is designed with minimal functionality, making it quick and reliable, while the kernel of Normal OS has more functionality and power. An example of RTOS is FreeRTOS, and an example of a Normal OS is Microsoft Windows.
The key differences between RTOS and Normal OS lie in their design for time-critical applications, scheduling, hardware, latency, and kernel. RTOS is preferred for real-time applications, while Normal OS is preferred for general computing environments.
To know more about hardware visit :
brainly.com/question/32810334
#SPJ11
In addition to the islands of the caribbean, where else in the western hemisphere has african culture survived most strongly
In addition to the islands of the Caribbean, African culture has also survived strongly in various other regions of the Western Hemisphere. Two notable areas where African culture has had a significant influence are Brazil and the coastal regions of West Africa.
1. Brazil: As one of the largest countries in the Americas, Brazil has a rich and diverse cultural heritage, strongly influenced by African traditions. During the transatlantic slave trade, Brazil received a significant number of African captives, resulting in a profound impact on Brazilian society.
2. Coastal Regions of West Africa: The coastal regions of West Africa, including countries like Senegal, Ghana, and Nigeria, have a strong connection to their African roots and have preserved significant aspects of African culture. These regions were major departure points during the transatlantic slave trade, resulting in the dispersal of African cultural practices across the Americas. Additionally, the influence of African religions, such as Vodun and Ifá, can still be observed in these regions.
It's important to note that African cultural influence extends beyond these specific regions, and elements of African heritage can be found in various other countries and communities throughout the Western Hemisphere. The legacy of African culture continues to shape and enrich the cultural fabric of numerous nations in the Americas, showcasing the resilience and enduring impact of African traditions.
Learn more about Hemisphere here
https://brainly.com/question/32343686
#SPJ11
The membership type, optional services, and membership payments are all used as a list. For example membershipDescription = [' ', 'Standard adult', 'Child (age 12 and under)', 'Student', 'Senior citizen'] membershipFees = [0, 40.00, 20.00, 25.00, 30.00] optionalDescription = ['No lessons', 'Yoga lessons', 'Personal trainer', 'Yoga and Personal trainer'] optionalFees = [0, 10.00, 50.00, 60.00] I'm having trouble calling the items in the list when a user inputs what they're looking for. Can you assist with this?
To call the items in the list based on user input, you can use the index() method to find the index of the desired item in the list, and then use that index to access the corresponding item from the other list. Here's an example -
membershipDescription = [' ', 'Standard adult', 'Child (age 12 and under)', 'Student', 'Senior citizen']
membershipFees = [0, 40.00, 20.00, 25.00, 30.00]
optionalDescription = ['No lessons', 'Yoga lessons', 'Personal trainer', 'Yoga and Personal trainer']
optionalFees = [0, 10.00, 50.00, 60.00]
# Get user input
membership_input = input("Enter the membership type: ")
optional_input = input("Enter the optional service: ")
# Find the index of the input in the membershipDescription list
membership_index = membershipDescription.index(membership_input)
# Use the index to access the corresponding fee from the membershipFees list
membership_fee = membershipFees[membership_index]
# Find the index of the input in the optionalDescription list
optional_index = optionalDescription.index(optional_input)
# Use the index to access the corresponding fee from the optionalFees list
optional_fee = optionalFees[optional_index]
# Print the results
print("Membership fee:", membership_fee)
print("Optional service fee:", optional_fee)
How does this work?In this example, the user is prompted to enter the membership type and optional service.
The index() method is then used to find the index of the input in the respective lists.
The obtained index is used to access the corresponding fee from the fees lists.
Learn more about user input at:
https://brainly.com/question/29351004
#SPJ4
ransomware is typically introduced into a network by a ________ and to an individual computer by a trojan horse.
The following term can complete the given sentence, "ransomware is typically introduced into a network by a ________ and to an individual computer by a trojan horse" - vulnerability.
Ransomware is a type of malicious software that locks users out of their devices and data. This software aims to demand a ransom from victims by encrypting the files on their computers or by preventing them from accessing the system.
These attacks are a popular way for cybercriminals to profit because they are relatively easy to carry out, and the ransom can be paid anonymously through digital currencies such as Bitcoin.
Ransomware is usually introduced into a network by exploiting vulnerabilities in software or operating systems. Once a vulnerability is identified, ransomware is often delivered via email attachments, malicious downloads, or through infected websites.
Once it infects a computer, ransomware can quickly spread through a network, encrypting files and locking users out of their systems.
A Trojan horse is a type of malware that is designed to trick users into downloading it onto their computers. It typically arrives as an email attachment or as a link to a malicious website.
Once it is downloaded, the Trojan horse can perform a variety of tasks, such as stealing sensitive information, downloading other malware, or giving a remote attacker control over the infected computer.
To know more about vulnerability visit:
https://brainly.com/question/30296040
#SPJ11
The function address_to_string consumes an Address and produces a string representation of its fields. An Address has a number (integer), street (string), city (string, and state (string). The string representation should combine the number and street with a space, the city and state with a comma and a space, and then the newline between those two parts. So the Address (25, "Meadow Ave", "Dover", "DE") would become "25 Meadow Ave\nDover, DE" Use Python and dataclass
The `address_to_string` function can be implemented in Python using the `dataclass` decorator to generate a string representation of an `Address` object.
How can the `address_to_string` function be implemented in Python using the `dataclass` decorator?The function `address_to_string` in Python can be implemented using the `dataclass` decorator. It takes an instance of the `Address` class as input and returns a string representation of its fields.
from dataclasses import dataclass
dataclass
class Address:
number: int
street: str
city: str
state: str
def address_to_string(address: Address) -> str:
address_line = f"{address.number} {address.street}"
city_state = f"{address.city}, {address.state}"
return f"{address_line}\n{city_state}"
```
The implementation above defines an `Address` class using the `dataclass` decorator, which automatically generates special methods for the class. The `address_to_string` function takes an instance of the `Address` class as an argument.
It creates two separate strings, `address_line` and `city_state`, which represent the number and street, and the city and state respectively. Finally, it combines these strings using newline `\n` to produce the desired string representation of the address.
Learn more about string` function
brainly.com/question/32125494
#SPJ11
A(n) ____ is perceived as a two-dimensional structure composed ofrows and columns.
a.table
c.attribute
b.rowset
d.intersection
A(n) table is perceived as a two-dimensional structure composed ofrows and columns.
The correct option is A.
A table is a structured arrangement of data in rows and columns. It is commonly used to organize and present information in a clear and organized manner.
Each row represents a separate record or observation, while each column represents a specific attribute or variable. The combination of rows and columns creates a two-dimensional structure that allows for easy comparison and analysis of the data.
Tables are widely used in various fields, including data analysis, statistics, databases, and spreadsheets, to present data in a structured format.
Learn more about Table here:
https://brainly.com/question/33917017
#SPJ4
Let A be an array of n integers. a) Describe a brute-force algorithm that finds the minimum difference between two distinct elements of the array, where the difference between a and b is defined to be ∣a−b∣Analyse the time complexity (worst-case) of the algorithm using the big- O notation Pseudocode/example demonstration are NOT required. Example: A=[3,−6,1,−3,20,6,−9,−15], output is 2=3−1. b) Design a transform-and-conquer algorithm that finds the minimum difference between two distinct elements of the array with worst-case time complexity O(nlog(n)) : description, complexity analysis. Pseudocode/example demonstration are NOT required. If your algorithm only has average-case complexity O(nlog(n)) then a 0.5 mark deduction applies. c) Given that A is already sorted in a non-decreasing order, design an algorithm with worst-case time complexity O(n) that outputs the absolute values of the elements of A in an increasing order with no duplications: description and pseudocode complexity analysis, example demonstration on the provided A If your algorithm only has average-case complexity O(n) then 2 marks will be deducted. Example: for A=[ 3,−6,1,−3,20
,6,−9,−15], the output is B=[1,3,6,9,15,20].
a) To get the minimum difference between two distinct elements of an array A of n integers, we must compare each pair of distinct integers in A and compute the absolute difference between them.
In order to accomplish this, we'll use two nested loops. The outer loop runs from 0 to n-2, and the inner loop runs from i+1 to n-1. Thus, the number of comparisons that must be made is equal to (n-1)+(n-2)+(n-3)+...+1, which simplifies to n(n-1)/2 - n.b) The transform-and-conquer approach involves transforming the input in some way, solving a simpler version of the problem, and then using the solution to the simpler problem to solve the original problem.
c) Given that the array A is already sorted in a non-decreasing order, we can traverse the array once, adding each element to a new array B if it is different from the previous element. Since the array is sorted, duplicates will appear consecutively. Therefore, we can avoid duplicates by only adding elements that are different from the previous element. The time complexity of this algorithm is O(n), since we only need to traverse the array once.
Here is the pseudocode for part c:
function getDistinctAbsValues(A):
n = length(A)
B = empty array
prev = None
for i = 0 to n-1:
if A[i] != prev:
B.append(abs(A[i]))
prev = A[i]
return B
Example: For A=[3,−6,1,−3,20,6,−9,−15], the output would be B=[1,3,6,9,15,20].
To know more about array visit:
https://brainly.com/question/13261246
#SPJ11
What is the process of determining the identity of client usually by a login process? Marks: 1 a) Authorization b) Accounting c) Authentication d) Federation e) Identity access
The process of determining the identity of the client usually by a login process is called Authentication.
Authentication is a process that verifies the identity of a user or client, often through a username and password. In addition, the authentication process will ensure that the user has the necessary permission and access rights to perform the task, access the information, or use the system.
Authorization, accounting, federation, and identity access are also related terms but they are not the process of determining the identity of the client usually by a login process.
To know more about Authentication visit:
https://brainly.com/question/30699179
#SPJ11
Create a calculator that can add, subtract, multiply or divide depending upon the input from the user, using loop and conditional statements. After each round of calculation, ask the user if the program should continue, if ' y ', run your program again; if ' n ', stop and print 'Bye'; otherwise, stop and print 'wrong input'.
This is a Python code to create a calculator that can add, subtract, multiply or divide depending upon the input from the user, using loop and conditional statements. It will then ask the user if the program should continue, if ' y ', run your program again; if ' n ', stop and print 'Bye'; otherwise, stop and print 'wrong input'.
we ask the user to input the numbers they want to work on and then use conditional statements to determine the operator they want to use. If the user input a wrong operator, the code will print "Wrong input" and terminate. The program continues until the user inputs 'n'.
To know more about Python code visit:
https://brainly.com/question/33331724
#SPJ11
Duolingo Duolingo courses make use of bite-sized, engaging lessons to teach real-world reading, listening, and speaking skills. With the use of artificial intelligence and language science lessons are tailored to help more than 500 million users learn at a personalized pace and level. Duolingo's strategy is to offer learning experiences through structured lessons with embedded test questions, in-person events, stories, and podcasts. This platform is offered in web-based and app formats for Android and iPhone Perform a PACT analysis on the Duolingo platform. Include a minimum of two remarks per component. (10 Marks)
PACT analysis refers to Political, Economic, Social, and Technological analysis. This is a tool used in the analysis of the external macro-environmental factors in relation to a particular business.
It helps identify various factors that may impact an organization. Below is the PACT analysis for the Duolingo platform. Political analysis Duolingo is not affected by political issues in the countries it operates in. The company is very successful and operates globally.
Economic analysis Duolingo’s prices are relatively lower than other competitors. The platform is free to use, and users only pay a subscription fee for some advanced features. Social analysis Duolingo courses make use of bite-sized, engaging lessons to teach real-world reading, listening, and speaking skills. The platform is designed to be accessible to everyone, and it provides a fun way for users to learn. Technological analysis Duolingo uses artificial intelligence and language science to provide personalized learning experiences. The platform is available in web-based and app formats for Android and iPhone, making it easy for users to access the platform on different devices.
Know more about PACT analysis here:
https://brainly.com/question/1453079
#SPJ11