(a) The outcome of this case has an effect on Redmond's ability to earn a living as it determines the limitations and extent of an employee's work contract upon leaving the company. The ruling of the case is the most frequently cited case dealing with what is called the "inevitable disclosure rule.
"The court upheld PepsiCo's claim that Redmond would disclose trade secrets to Quaker that he acquired while working for PepsiCo and barred him from working for Quaker. Therefore, Redmond's ability to earn a living was restricted in that he could not work for Quaker or any other competitor of PepsiCo.(b) PepsiCo is not legally required to re-hire Redmond.
The company had filed a suit to stop him from working for Quaker as it had the right to protect its trade secrets. Redmond was found guilty of violating the company's confidentiality agreements. Therefore, there is no legal requirement for PepsiCo to re-hire him.
To know more about limitations visit:
https://brainly.com/question/12207539
#SPJ11
Complete the make-or-buy analysis. HOME INSERT PAGE LAYOUT XS Prepare a make-or-buy analysis - Excel FORMULAS DATA FILE REVIEW VIEW Calibri % Paste BIU. Alignment Number Conditional Format as Cell Formatting Table Styles Clipboard Styles F26 ⠀ A B с D E G H I 1 Alanco, Inc. manufactures a variety of products and is currently maunfacturing all of its own component parts. 2 An outside supplier has offered to sell one of those components to Alanco. To evaluate this offer, the following 3 information has been gathered relating to the cost of producing the component internally: 4 5 Direct materials $ 4.00 6 Direct labor 6.00 2.00 7 Variable manufacturing overhead 5.00 8 Fixed manufacturing overhead, direct* 8.00 9 Fixed manufacturing overhead, common but allocated 25.00 10 Total cost 11 12 Supplier price $ 21.00 13 14 Units used per year 12,000 15 16 *The fixed manufacturing overhead, direct 17 Depreciation of equipment (no resale value) Supervisor salary 30% 70% 18 19 20 1. Assuming the company has no alternative use for the facilities now being used to produce the 21 component, complete the following analysis to determine if the outside supplier's offer should be accepted. 22 23 Per Unit Differential Cost Make Buy Total for 12,000 units Make Buy 24 25 26 Cost of purchasing 27 Direct materials 28 Direct labor 29 Variable manufacturing overhead 30 Fixed manufacturing overhead, traceable 31 Fixed manufacturing overhead, common Sheet1 READY * CB Г Font 11 A A T A T A Cells ? M Editing J K 8 Sign In L X 100%
The company should purchase from the outside supplier as the cost of buying from the supplier is $252,000, which is less than the cost of making the component internally, which is $270,000.
Given Information Direct Materials: $4.00Direct Labor: $6.00Variable Manufacturing Overhead: $5.00Fixed Manufacturing Overhead, Direct: $8.00Fixed Manufacturing Overhead, Common but Allocated: $25.00Supplier Price: $21.00Units used per year: 12,000The company Alanco Inc. manufactures a variety of products and currently manufactures all of its component parts. An outside supplier has offered to sell one of those components to Alanco. The following analysis determines whether the outside supplier's offer should be accepted or not. To find out, we must calculate the make or buy cost and then compare it with the supplier's offer price. Calculation Make Cost per unit: Direct materials + Direct labor + Variable manufacturing overhead + Fixed manufacturing overhead, direct+ Fixed manufacturing overhead, common but allocated= $4 + $6 + $5 + $8 + $25 = $48 Buy Cost per unit: Supplier price = $21 Differential cost per unit: $48 – $21 = $27 Total cost of manufacturing 12,000 units: $27*12,000 = $324,000Total cost of buying 12,000 units: $21*12,000 = $252,000. The above table shows the calculation of make-or-buy analysis. Make Cost per unit is calculated by adding Direct Materials, Direct Labor, Variable Manufacturing Overhead, Fixed Manufacturing Overhead, Direct, and Fixed Manufacturing Overhead, Common but Allocated. Similarly, Buy Cost per unit is given as $21, and the Differential cost per unit is the difference between the Make Cost per unit and Buy Cost per unit. The Total cost of manufacturing 12,000 units can be calculated by multiplying the Differential Cost per unit by the number of units used per year. Similarly, the Total cost of buying 12,000 units can be calculated by multiplying the Supplier Price by the number of units used per year.
Therefore, the Total cost of manufacturing 12,000 units = 27 * 12,000 = $324,000, and the Total cost of buying 12,000 units = 21 * 12,000 = $252,000. Since the cost of buying is less than the cost of making, Alanco should purchase from the outside supplier.
To know more about cost visit :
https://brainly.com/question/14566816
#SPJ11
Mordor Pharmaceuticals, Inc., pleads guilty to criminal allegations surrounding its role in the opioid crisis. Several board members are also indicted and plead guilty, but the chief executive officer is not. What sort of penalty will Mordor face, if any? The board members will be incarcerated Mordor will pay a monetary penalty Mordor will be banned from working in the pharmaceutical industry A large, physical barrier will be erected around Mordor and its headquarters on top of Mount Doom No penalty. Corporations are not human beings and cannot commit crimes
Mordor Pharmaceuticals, Inc. may face a monetary penalty, but the CEO will not be held accountable for the criminal allegations surrounding the company's role in the opioid crisis.
In what way will Mordor Pharmaceuticals, Inc. be penalized for its involvement in the opioid crisis, if any?Mordor Pharmaceuticals, Inc., may face a monetary penalty for its role in the opioid crisis. However, the CEO will not be held personally liable for the criminal allegations.
Corporate entities can be subject to penalties and fines for illegal activities, and in this case, Mordor Pharmaceuticals, Inc. might be required to pay a substantial amount as a penalty. The specific amount of the penalty would depend on various factors such as the severity of the company's involvement, the harm caused, and the applicable laws and regulations.
Learn more about pharmaceutical
brainly.com/question/31718381
#SPJ11
Describe how audit evidence can be collected.
Describe the difference between concurrent audit techniques and embedded audit modules.
Describe the 5 commonly used concurrent audit techniques.
Define and give examples of embedded audit modules.
Audit evidence collection is an essential aspect of the audit process that aims to help auditors obtain sufficient and appropriate audit evidence to back up audit assertions and judgments. Here is how audit evidence can be collected. The Difference Between Concurrent Audit Techniques and Embedded Audit Modules Concurrent audit techniques are auditing procedures that occur concurrently with transaction processing. five most commonly used concurrent audit techniques include the following:
1. System Control Audit Review File (SCARF)
2. Continuous and Intermittent Simulation (CIS)
3. Integrated Test Facility (ITF)
4. Snapshot
5. Audit Hooks Embedded Audit Modules
Embedded audit modules are parts of application systems that perform continuous audit tests. These modules are integrated into the application system and can be used to audit all transactions that pass through the system.
Audit Evidence Collection Audit evidence can be collected through various means, including observing physical inventory counts, reviewing documentation, making inquiries, testing internal controls, and performing substantive testing. Audit evidence can be classified into external and internal evidence depending on where it originates from.External evidence relates to documents or materials originating outside the client's organization and includes bank statements, confirmations from customers and suppliers, and legal documentation. On the other hand, internal evidence originates within the client's organization and includes the client's accounting records, minutes of meetings, and reports.The Difference Between Concurrent Audit Techniques and Embedded Audit Modules Concurrent audit techniques are auditing procedures that occur concurrently with transaction processing. Concurrent auditing entails running an audit while the process under review is ongoing. This type of audit is used to detect issues in a transaction as it occurs.Embedded audit modules are audit procedures that are embedded in application systems. These procedures can be used to audit all transactions that occur through the system. Embedded audit modules are an integral part of the system, and they perform continuous audit tests.Commonly Used Concurrent Audit Techniques The five most commonly used concurrent audit techniques include the following:
1. System Control Audit Review File (SCARF)
2. Continuous and Intermittent Simulation (CIS)
3. Integrated Test Facility (ITF)
4. Snapshot
5. Audit Hooks Embedded Audit Modules
Embedded audit modules are parts of application systems that perform continuous audit tests. These modules are integrated into the application system and can be used to audit all transactions that pass through the system. An embedded audit module is an example of an IT control that helps ensure data integrity. The objective of the embedded audit module is to provide continuous monitoring of an application system's transactions and operations to ensure the completeness, accuracy, and validity of the data entered into the system. Examples of embedded audit modules include system security, input data validation, and automated reconciliation processes.
To know more about Audit Techniques visit:
https://brainly.com/question/31977267
#SPJ11
A firm's basic rate is $3 per hour and overtime rates are time and a half for evenings and double for weekends. The following details have been recorded on three jobs. Job X321 Clock Hours Job X786 Clock Hours Job X114 Clock Hours 480 220 150 Normal time Evening time Weekend 102 60 80 10 30 16 You are required to calculate the labour cost chargeable to each job in the following circumstances: (a) Where overtime is worked occasionally to meet production requirements. (b) Where overtime is worked at the customer's request to bring forward the delivery time. (c) Write the journal entries to account for direct wages and indirect wages
To calculate the labor cost chargeable to each job, we need to consider the clock hours worked for normal time, evening time, and weekend hours.
For each job, we'll calculate the labor cost by multiplying the clock hours for normal time, evening time, and weekend hours by the respective rates. Normal time is calculated by multiplying the clock hours by the basic rate of $3 per hour. Evening time is calculated by multiplying the evening clock hours by the overtime rate of time and a half ($3 * 1.5). Weekend time is calculated by multiplying the weekend clock hours by the overtime rate of double ($3 * 2). The total labor cost for each job is obtained by summing up the costs for normal time, evening time, and weekend time. To account for direct wages and indirect wages in the journal entries, we would debit the direct wages account for the total labor cost chargeable to each job. Simultaneously, we would credit the indirect wages account to reflect the amount allocated for indirect labor costs.
To learn more about journal click here; brainly.com/question/31718461
#SPJ11
true/ false – one of the benefits to free trade is that it allows countries to capitalize on their resources to accomplish a favorable balance of trade because trade is a zero-sum game.
Answer:
False
Explanation:
False. One of the benefits of free trade is not that it allows countries to accomplish a favorable balance of trade because trade is not a zero-sum game.
This is a true statement. Free trade allows countries to specialize in producing and exporting goods that they have a comparative advantage in, while importing goods that they are less efficient at producing.
This specialization and trade allows countries to make better use of their resources, leading to increased production efficiency, and ultimately a favorable balance of trade. It is important to note that trade is not a zero-sum game, meaning that one country's gain does not necessarily result in another country's loss. Instead, free trade can benefit all participating countries by increasing overall economic growth and reducing the costs of goods for consumers. Additionally, free trade can promote innovation and competition, leading to further economic development and growth.
To know more about comparative advantage visit:
https://brainly.com/question/29758265
#SPJ11
CD Corp. acquired some special equipment for € 646000 on August 1, 2014. The useful life of the equipment was estimated to be 7 years and its residual value was assumed to be zero. The company uses the linear method and calculates the annual depreciation charges according to the number of months used. The depreciation is recorded indirectly. On November 30, 2015, the equipment was sold for € 597000 cash.
Requirement: Post all necessary entries for 2015 (including any adjusting entries) related to the sale of the equipment to the corresponding ledger accounts. There are no closing entries required.
To record the necessary entries for the sale of the equipment in 2015, we need to account for the depreciation expense and the sale transaction. Here are the entries:
Depreciation Expense:
Debit: Depreciation Expense (Income Statement) - € (646,000 / 7 years * 16 months)
Credit: Accumulated Depreciation (Balance Sheet) - € (646,000 / 7 years * 16 months)
Explanation: The equipment was used for 16 months in 2015 (from January 1 to November 30), so we need to record the depreciation expense for that period.
Sale of Equipment:
Debit: Cash (Asset) - € 597,000
Debit: Accumulated Depreciation (Balance Sheet) - (Amount equal to the total accumulated depreciation up to the date of sale)
Debit: Loss on Sale of Equipment (Income Statement) - (Difference between the carrying amount and the sale proceeds)
Credit: Equipment (Asset) - € 646,000
Explanation: The equipment was sold for € 597,000, which is less than its carrying amount. Therefore, a loss on the sale is recorded.
Please note that the specific amount of accumulated depreciation and loss on sale needs to be calculated based on the information provided. Also, ensure that the ledger accounts are updated with the corresponding amounts and dates for these entries.
Learn more about Asset visit:
brainly.com/question/30485132
#SPJ11
8. High and persistent inflation (increase in prices) is caused mainly because, a. Unions raise wages. b. OPEC increases post-oil prices. c. Governments and their Central Banks excessively increase the amount of money in circulation. d. Government regulations that cause an increase in production costs
High and persistent inflation (increase in prices) is caused mainly because governments and their Central Banks excessively increase the amount of money in circulation.
Option c, "Governments and their Central Banks excessively increase the amount of money in circulation," is the main cause of high and persistent inflation. When the government and central banks increase the money supply significantly, more money enters the economy. This excess money supply can lead to increased consumer spending, which, in turn, can drive up demand for goods and services. As demand rises, businesses may increase prices to capitalize on the increased purchasing power of consumers. This continuous increase in prices over time is known as inflation.
While the other options listed (a, b, and d) can also influence inflation to some extent, they are not the main drivers of high and persistent inflation. Unions raising wages (option a) can contribute to cost-push inflation, where higher wages result in increased production costs, leading to price increases. OPEC increasing post-oil prices (option b) can lead to higher energy costs, which can affect the prices of goods and services. Government regulations that cause an increase in production costs (option d) can also put upward pressure on prices. However, these factors alone are not sufficient to explain high and persistent inflation.
It is important to note that inflation is a complex phenomenon influenced by various economic factors, and its causes can vary across different contexts and time periods. However, the excessive increase in the money supply by governments and central banks is widely recognized as a primary driver of high and persistent inflation.
To learn more about central banks, Visit:
https://brainly.com/question/29547955
#SPJ11
A licensee must inform a seller of the four business relationships
a) during their first face-to-face meeting
b) before the seller’s motivation or desired selling price is discussed
c) when the seller agrees to enter into a listing agreement
d) when the licensee prepares a comparative market analysis for the seller’s property
A licensee must inform a seller of the four business relationships:
a) During their first face-to-face meeting.
b) Before the seller's motivation or desired selling price is discussed.
c) When the seller agrees to enter into a listing agreement.
d) When the licensee prepares a comparative market analysis for the seller's property.
It is essential for a licensee to disclose these business relationships to the seller at these specific points to ensure transparency and informed decision-making. By providing this information, the licensee establishes a clear understanding of their role and obligations, as well as any potential conflicts of interest that may arise throughout the real estate transaction process. This disclosure helps build trust between the licensee and the seller and promotes a fair and ethical business relationship.
Learn more about licensee here:
https://brainly.com/question/29804028
#SPJ11
Problem solving information would NOT be used in which of the following situations? A) decision to make or buy parts for a manufactured product B) decision to replace equipment C) decision to add or drop a division D) evaluating the operating performance of a segment in the current year E) all the above
The use of problem-solving information in managerial accounting is essential in decision-making and problem-solving. However, it is not used when making strategic decisions like adding or dropping a division. option (C) is the correct option.
When it comes to managerial accounting, problem-solving information is used in many ways.
The data collected and analyzed in managerial accounting assists management in decision-making and problem-solving.However, a decision to add or drop a division would not use problem-solving information. This is because adding or removing divisions involves strategic planning, which is done through methods such as SWOT analysis, PESTLE analysis, etc.
Although the managers may use accounting data to decide which segment to eliminate or which one to expand, it is not a problem-solving situation but a strategic one.Moreover, the process of adding or dropping a division involves a long-term strategy, which requires the consideration of different factors like future sales, market trends, and competitors. Therefore, the decision to add or drop a division is a strategic decision and not a problem-solving situation.
Hence, option (C) is the correct option.
Know more about the managerial accounting
https://brainly.com/question/3815117
#SPJ11
XYZ, Inc. manufactures a part that it uses in its main product. The company annually manufactures 30,000 units of this piece. A supplier has offered to sell the pre-made part to XYZ management for $50. The company is operating with idle capacity ("Idle capacity"). The unit cost of manufacturing the part in-house is as follows: Materials $14 direct labor Variable indirect costs Fixed indirect costs Total $49 *They will be incurred even if the company decides not to accept the offer. The relevant costs ("relevant costs") of manufacturing a unit of the part amount to: 12 10 13 Multiple Choice O. $36 O $22 $49 $26
The relevant cost of manufacturing a unit of the part amounts to $36. The unit cost of manufacturing the part in-house is $49.
In this scenario, XYZ, Inc. has the option to either manufacture the part in-house or purchase it from a supplier for $50 per unit. The relevant costs refer to the costs that are specifically associated with manufacturing the part and are relevant to the decision-making process.
The unit cost of manufacturing the part in-house is $49, which includes the cost of materials, direct labor, variable indirect costs, and fixed indirect costs. However, the fixed indirect costs are considered irrelevant in this decision because they would be incurred even if the company decides not to manufacture the part in-house.
To determine the relevant cost of manufacturing a unit of the part, we exclude the fixed indirect costs from the unit cost. Therefore, the relevant cost of manufacturing a unit of the part is $49 - $13 (fixed indirect costs) = $36.
Hence, the relevant cost of manufacturing a unit of the part is $36.
Learn more about manufacturing here
https://brainly.com/question/1082619
#SPJ11
what is the name given to financial markets for stocks
and ling term debts
The name given to financial markets for stocks and long-term debts is capital markets.
What are capital markets?Capital markets are financial markets where financial instruments that have long or indefinite maturity are traded. In capital markets, the buying and selling of medium-term or long-term financial instruments such as stocks, bonds, and other securities are carried out for a period of more than one year.
A capital market is a type of financial market where stocks, bonds, and other long-term securities are traded. It is where businesses, governments, and individuals can trade securities in the hope of achieving their financial goals.
Credit rating agencies, institutional investors, banks, and other financial institutions are some of the participants in capital markets. For example, a firm that seeks to raise capital to fund a new product or service development may issue bonds or shares of stock in the capital markets to finance its expansion plans.
Read more about Financial Markets at https://brainly.com/question/28319655
#SPJ11
Pinker Corporation began the year with cash of $37,000 and a computer that cost $17.000. During the year, Pinker eamed sales revenue of $115,000 and had the following expemes salates $65.000, rent $5,000, and utilities $1.500 A year end, Pinker's cash balance was down to $19.000. How much net income (or net loss) did Pinker experience for the year? OA. $38,500 OBL $(18,000) OC. $115.000 OD. $110,000
To determine the net income (or net loss) experienced by Pinker Corporation for the year, we need to calculate the total expenses and compare it with the sales revenue. Pinker Corporation experienced a net income of $43,500 for the year.
Pinker began the year with $37,000 cash and a computer costing $17,000. Throughout the year, they earned sales revenue of $115,000 and incurred expenses including salaries of $65,000, rent of $5,000, and utilities of $1,500. At the year-end, Pinker's cash balance was $19,000. To calculate the net income (or net loss), we subtract the total expenses from the sales revenue. The total expenses for Pinker Corporation can be calculated by summing up the salaries, rent, and utilities:
Total expenses = $65,000 (salaries) + $5,000 (rent) + $1,500 (utilities) = $71,500.
To calculate the net income (or net loss), we subtract the total expenses from the sales revenue: Net income (or net loss) = Sales revenue - Total expenses
Net income (or net loss) = $115,000 (sales revenue) - $71,500 (total expenses) = $43,500.
Therefore, Pinker Corporation experienced a net income of $43,500 for the year.
Learn more about net income here: brainly.com/question/1347024
#SPJ11
Swifty Corporation produced 210000 units in 95000 direct labor hours. Production for the period was estimated at 220000 units and 110000 direct labor hours. A flexible budget would compare budgeted costs and actual costs, respectively, at
a. 105000 hours and 110000 hours. b. 95000 hours and 95000 hours. c. 105000 hours and 95000 hours. d. 110000 hours and 95000 hours.
105,000 hours actual and 95,000 hours budgeted.
Flexible budget comparison: actual vs budgeted hours?To determine the appropriate comparison for a flexible budget between budgeted costs and actual costs, we need to consider the given information.
In the question, Swifty Corporation produced 210,000 units in 95,000 direct labor hours. However, the production for the period was estimated at 220,000 units and 110,000 direct labor hours.
A flexible budget compares the budgeted costs with the actual costs. Since the actual direct labor hours used were 110,000 and the estimated direct labor hours for the period were also 110,000, the appropriate comparison for the direct labor hours would be:
c. 105,000 hours and 95,000 hours.
Therefore, the answer is option c. 105,000 hours and 95,000 hours.
Learn more about Flexible budget
brainly.com/question/32583913
#SPJ11
The following information describes a manufacturing system: Daily demand is 1,040 units. Replenishment lead time is 14 days. A 2.3 day safety stock is desired. Products are stored in containers that hold 930 units. Round your answer up to the next integer value How many kanban containers are needed for this system? Containers
16 kanban containers are needed for this system. In order to calculate how many kanban containers are needed for the given manufacturing system, we need to use the following formula
Number of kanban containers = (Daily demand x Replenishment lead time) / Container size
Let's plug in the given values:
Daily demand = 1,040 units
Replenishment lead time = 14 days
Safety stock = 2.3 days
Container size = 930 units
Now, let's calculate the number of kanban containers:
Number of kanban containers = (Daily demand x Replenishment lead time) / Container size
Number of kanban containers = (1,040 x 14) / 930Number of kanban containers = 15.7
Round this up to the next integer value to get:
Number of kanban containers = 16
Therefore, 16 kanban containers are needed for this system.
Daily demand = 1,040 units
Replenishment lead time = 14 days
Safety stock = 2.3 days
Container size = 930 units
To calculate the number of kanban containers needed for this system, we can use the following formula:
Number of kanban containers = (Daily demand x Replenishment lead time) / Container size
Let's substitute the given values:
Number of kanban containers = (1,040 x 14) / 930
Number of kanban containers = 15.7
We need to round this up to the nearest integer value since we can't have a fraction of a container.
Therefore: Number of kanban containers = 16
Learn more about Replenishment lead time: https://brainly.com/question/31219448
#SPJ11
A Moving to the next question prevents changes to this answer. Question 13 is the most serious danger to the conventional approach to business ethics. Resistance to change Cultural relativism Ethical relativism Ethical egoism Moving to the next question prevents changes to this answer. W O Less than half of the time remains. question Completion Status: Ls A Moving to the next question prevents changes to this answer. Question 14 of 35> Question 14 5 points Save Answer In the first year of the COVID-19 pandemic, the Centre for Disease Control (CDC) of the United States (US) announced that six women had developed blood clots after undergoing vaccination in the ongoing COVID-19 pandemic leading to fatal consequences. The complications were associated with the Johnson & Johnson vaccine. This observation by the CDC prompted the World Health Organisation (WHO) to advise countries using that vaccine to consider suspending their vaccination exercises until further analysis had been done to determine the way forward. Just around the time that the WHO issued its advisory, South Africa, which was also using the Johnson & Johnson vaccine, promptly decided to halt its vaccination exercise until its health experts had done further probes and come out with a verdict on the safety of the vaccine. Meanwhile, Angela Merkel, the then head of state of Germany, announced without any hesitation that her country was not going to suspend its vaccination exercise because the benefits of using the vaccine far outweighed the risks. She justified her position by comparing the number of people who had died from blood clots resulting from the vaccine (i.e the six women) to the over six million people who had already been vaccinated in the US without any complications. She also said that far more people would die if the vaccination was discontinued compared to the negligible proportion that stood the risk of developing complications. Therefore, Germany did not pause the vaccination with the Johnson & Johnson vaccine. Was the position of Germany ethical? nces that its decision will have on its people. OYes, because their position employed the deontological principle of ethics O No. because it is unethical for a government not to care about the conse O No, because they were unnecessarily putting their citizens at risk. Yes, because they applied the utilitarian principle of ethics. O ENG 16:49 INTL 2022/05/20 Remaining Time: 26 minutes, 53 seconds. Question Completion Status: □D 18°C Sunny de E 18°C Less than half of the time re Moving to the next question prevents changes to this answer. Question 15 of Question 15 4 points Save And In the stakeholder management approach that focuses on the stakeholder network, when the centrality of the company in the stakeholder network is low and the density of the stakeholder network is low, then- O the organisation lacks power because it has only a few connections to other stakeholders that are well organised and linked to each other. the organisation will attempt to decrease the power that the stakeholder has over it. Othen the organisation may behave opportunistically to form a relationship with a stakeholder the organisation will experience few pressures because it encounters only some demands from its stakeholders that share few linkages with each other Question 15 of 35 Moving to the next question prevents changes to this answer,
Resistance to change is the most serious danger to the conventional approach to business ethics. Cultural relativism, ethical relativism, and ethical egoism are the three ethical concepts that can be used to identify the ethical issues.
Ethical relativism is a theory that claims that moral values are relative to the culture and time in which they are expressed. Ethical egoism is the theory that an act is moral if it maximizes the individual's self-interest. Germany's position was ethical because they applied the utilitarian principle of ethics.In the stakeholder management approach that focuses on the stakeholder network, when the centrality of the company in the stakeholder network is low and the density of the stakeholder network is low, then the organization lacks power because it has only a few connections to other stakeholders that are well organized and linked to each other. The organization will attempt to decrease the power that the stakeholder has over it.
Resistance to change is a significant threat to conventional business ethics. Resistance to change can occur in a variety of forms, including lack of knowledge, fear of the unknown, and personal or professional threats. Ethical relativism, cultural relativism, and ethical egoism are the three ethical concepts that can be used to identify ethical issues. Ethical relativism is a theory that claims that moral values are relative to the culture and time in which they are expressed. Ethical egoism is the theory that an act is moral if it maximizes the individual's self-interest.Germany's position was ethical because they applied the utilitarian principle of ethics.
Angela Merkel, the then-head of state of Germany, announced without hesitation that her country was not going to suspend its vaccination exercise because the benefits of using the vaccine far outweighed the risks. She justified her position by comparing the number of people who had died from blood clots resulting from the vaccine to the over six million people who had already been vaccinated in the US without any complications.
To know more about business ethics visit:
https://brainly.com/question/30397877
#SPJ11
Regis Clothiers can borrow from its bank at 19 percent to take a cash discount. The terms of the cash discount are 2/14, net 55. a. Compute the cost of not taking the cash discount. (Use a 360-day year. Do not round intermediate calculations. Input your final answer as a percent rounded to 2 decimal places.) Cost of not taking a cash discount % b. Should the firm borrow the funds? O No Yes.
According to question we have it is profitable for Regis Clothiers to borrow from its bank to take a cash discount.
a. Compute the cost of not taking the cash discount. The formula for the cost of not taking a cash discount is: Cost of not taking a cash discount = [Discount % ÷ (100 − Discount %)] × [360 ÷ (Full allowed payment days − Discount days)]Using the given data, Discount = 2%Full allowed payment days = 55 days Discount days = 14 days Cost of not taking a cash discount = [2 ÷ (100 − 2)] × [360 ÷ (55 − 14)]Cost of not taking a cash discount = 38.16% .
Therefore, the cost of not taking a cash discount is 38.16% which implies that the company has to pay a high cost for not taking the cash discount. b. the firm should borrow funds as the cost of not taking a cash discount is 38.16% which is much greater than the interest rate of 19%. So, it is profitable for Regis Clothiers to borrow from its bank to take a cash discount.
To know more about Profitable visit :
https://brainly.com/question/29662354
#SPJ11
give an example of a company that exports a service directly
give an example of a service comapny that uses joint
venture
give an example of a service company that uses merger
A software development company that provides remote programming services to clients in different countries.
The software development company directly exports its service by offering its programming expertise to clients located outside of its home country. The service is delivered remotely, without the need for physical presence or transportation of goods.
A consulting firm and a local construction company forming a joint venture to provide comprehensive infrastructure development solutions.
The consulting firm and the construction company join forces through a joint venture to leverage their respective expertise and resources. By collaborating, they offer a complete range of services to clients, combining consulting and construction capabilities.
A telecommunications company merging with a media production company to create an integrated entertainment and content streaming service.
The telecommunications company and the media production company merge their operations to form a new entity that offers combined services. The merger allows them to provide a seamless experience for customers, integrating telecommunications and media services into a single platform.
learn more about transportation of goods here:
https://brainly.com/question/29672053
#SPJ11
Equipment acquired on January 8 at a cost of $137,550 has an estimated useful life of 16 years, has an estimated residual value of $9,550, and is depreciated by the straight-line method.
a.What was the book value of the equipment at December 31 the end of the fifth year?b.
Assuming that the equipment was sold on April 1 of the sixth year for $90,510, journalize the entries to record (1) depreciation for the three months until the sale date, and (2) the sale of the equipment. Refer to the Chart of Accounts for exact wording of account titles.
a. the book value of the equipment at the end of the fifth year is $97,550. b. the depreciation expense for the three months until the sale date is $2,000 and the gain on the sale of equipment is $4,040.
a. To calculate the book value of the equipment at the end of the fifth year, we need to determine the accumulated depreciation for the equipment up to that point. Since the equipment has an estimated useful life of 16 years, the depreciation expense per year can be calculated as follows:
Depreciation Expense per Year = (Cost - Residual Value) / Useful Life
Depreciation Expense per Year = ($137,550 - $9,550) / 16
Depreciation Expense per Year = $128,000 / 16
Depreciation Expense per Year = $8,000
To find the accumulated depreciation at the end of the fifth year, we multiply the depreciation expense per year by the number of years:
Accumulated Depreciation at the End of the Fifth Year = Depreciation Expense per Year * Number of Years
Accumulated Depreciation at the End of the Fifth Year = $8,000 * 5
Accumulated Depreciation at the End of the Fifth Year = $40,000
The book value of the equipment at the end of the fifth year can be calculated by subtracting the accumulated depreciation from the cost of the equipment:
Book Value at the End of the Fifth Year = Cost - Accumulated Depreciation
Book Value at the End of the Fifth Year = $137,550 - $40,000
Book Value at the End of the Fifth Year = $97,550
Therefore, the book value of the equipment at the end of the fifth year is $97,550.
b. To journalize the entries for the depreciation and sale of the equipment:
Depreciation Entry:
Date: April 1 (end of the sixth year)
Depreciation Expense: Debit $2,000
Accumulated Depreciation: Credit $2,000
Sale of Equipment Entry:
Date: April 1 (end of the sixth year)
Cash: Debit $90,510
Accumulated Depreciation: Debit $42,000
Equipment: Debit $137,550
Gain on Sale of Equipment: Credit $4,040
(To record the sale of equipment at a gain)
Please note that the amounts used in the journal entries are based on the assumption that the depreciation expense for the three months until the sale date is $2,000 and the gain on the sale of equipment is $4,040. These figures may vary depending on the specific calculations and assumptions made for depreciation and the sale of the equipment.
Learn more about equipment here
https://brainly.com/question/13838094
#SPJ11
the concept of disparate impact is significant in employment law because it
The concept of disparate impact is significant in employment law because it addresses discrimination that occurs unintentionally but still has a disproportionately negative impact on certain protected groups.
It focuses on the outcomes or consequences of employment practices rather than the intent behind them, ensuring that employers cannot engage in practices that disproportionately disadvantage certain groups, even if there is no intentional discrimination.
Disparate impact is a legal concept that recognizes the significance of unintentional discrimination in employment practices. It refers to situations where an employment policy or practice, although seemingly neutral on its face, has a disproportionately adverse impact on individuals from certain protected groups, such as racial or ethnic minorities, women, or individuals with disabilities.
Learn more about employment here:
https://brainly.com/question/17459074
#SPJ11
Your firm currently has $104 million in debt outstanding with a 9% interest rate. The terms of the loan require it to repay $26 million of the balance each year. Suppose the marginal corporate tax rate is 35%, and that the interest tax shields have the same risk as the loan. What is the present value of the interest tax shields from this debt?
Part 1 The present value of the interest tax shields is _ million. (Round to two decimal places.)
To calculate the present value of the interest tax shields, we need to determine the tax shield amount and then discount it to present value.
The tax shield amount is equal to the interest expense multiplied by the corporate tax rate. In this case, the interest expense can be calculated as the outstanding debt multiplied by the interest rate:
Interest expense = Debt outstanding * Interest rate
Interest expense = $104 million * 9% = $9.36 million
Tax shield amount = Interest expense * Tax rate
Tax shield amount = $9.36 million * 35% = $3.276 million
To calculate the present value, we can use the formula for the present value of a growing perpetuity:
Present value = Tax shield amount / Discount rate
Since the interest tax shields have the same risk as the loan, we can use the loan's interest rate as the discount rate. Therefore, the present value can be calculated as:
Present value = $3.276 million / 9% = $36.4 million
Rounding to two decimal places, the present value of the interest tax shields from this debt is $36.40 million.
Learn more about interest here : brainly.com/question/30393144
#SPJ11
Q4) The most recent financial statement for your company is as follows. Sales for 2021 are projected to grow by 25%. Interest expense will remain constant. The tax rate and the dividend payout rate will also remain constant. Costs, other expenses, current assets, and accounts payable increase spontaneously with sales. If the firm is operating at only 70% capacity, and no new debt or equity is issued, what is the external financing needed to support the growth rate in sales? (10 Points) Income Statement 2021 Sales $800,000 Costs 700,000 Other expenses 20,000 Ebit 80,000 Interest paid 10,000 Taxable income 70,000 Taxes (35%) 24,500 Net income 45,500 Balance Sheet 2021 Liabilities and Equity Current liabilities 25,000 Acc payable 40,000 Notes payable 85,000 Total 150,000 Longterm debt Owners' Equity 422,026 Comm. Stock RE Total 572,026 Total liability and equity Dividend Add to RE Current assets Cash Acc. Receivables Inventory Total Fixed assets Net plant & equip. Total assets Assets 33,735 11,765 68,000 17,000 85,000 158,000 140,000 182,900 322,900 565,900
External financing needed to support growth rate in sales is $124,375. Costs, other expenses, current assets, and accounts payable increase spontaneously with sales.
Given that sales for 2021 are projected to grow by 25%, interest expense will remain constant, and the tax rate and dividend payout rate will also remain constant.
1. From the income statement, we have:
Sales $800,000
Costs 700,000
Other expenses 20,000
EBIT 80,000
Interest paid 10,000
Taxable income 70,000
Taxes (35%) 24,500
Net income 45,500
2. From the balance sheet, we have:
Current assets
Cash 33,735
Accounts Receivables 11,765
Inventory 68,000
Total 113,500
Fixed assets
Net plant & equipment 322,900
Total assets 436,400
3. Liabilities and Equity
Current liabilities 25,000
Accounts payable 40,000
Notes payable 85,000
Total 150,000
Long-term debt 189,374
Owners' equity 422,026
Common stock 35,000
Retained earnings 387,026
Total 611,400
Total liabilities and equity 761,400
Here, external financing is given as: External financing = (A*/S)ΔS – spontaneous liabilities – retained earnings.
Where A* is the asset intensity ratio, which is fixed assets / total assets and ΔS is the change in sales. Here, A* = 322,900 / 436,400 = 0.741.
External financing = (0.741/1.25) × (800,000 - 700,000) - (25,000 + 40,000) - 45,500
Thus, External financing = $124,375.
Hence, total liabilities and equity 761,400 and the external financing needed to support growth rate in sales is $124,375.
To know more about growth rate visit:
brainly.com/question/13870574
#SPJ11
QUESTION 4 a. Using demand and supply analysis, draw and explain the changes happened in the price and quantity equilibrium when the government provided 10% subsidy to all manufacturing industries in
In a demand and supply analysis, the introduction of a 10% subsidy to all manufacturing industries would likely lead to a decrease in price and an increase in quantity equilibrium.
This is because the subsidy effectively lowers the production costs for manufacturers, resulting in an increase in supply and a decrease in price.
The introduction of a 10% subsidy to all manufacturing industries would impact both the supply and demand sides of the market. On the supply side, the subsidy reduces the production costs for manufacturers, effectively shifting the supply curve to the right.
With lower costs, manufacturers are incentivized to increase production and offer their goods at a lower price.
As a result, the equilibrium price in the market would decrease. The decrease in price would lead to an increase in consumer demand as products become more affordable. This increase in demand would be reflected in a shift of the demand curve to the right.
The combined effect of the rightward shift in supply and the rightward shift in demand would result in a new equilibrium point with a lower price and a higher quantity. The decrease in price would benefit consumers by making goods more affordable, while the increase in quantity would allow for a greater availability of products.
Overall, the introduction of the 10% subsidy would create a market environment where both consumers and manufacturers experience favorable outcomes in terms of lower prices and increased production.
Learn more about incentivized here:
https://brainly.com/question/1798485
#SPJ11
Fish Possibility (pounds) A 37 B 31 20 D 9 Fruit (pounds) 56 78 90 99 Robinson Crusoe divides his time between catching fish and gathering fruit. Part of his production possibilities frontier is given in the above table. Mr. Crusoe lonesome, is efficient and always stays on his PPF. Mr. Crusoe is consuming 20 pounds of fish. Then he decides to slowly become a vegetarian and decrea- consumption of fish to 9 pounds. This decision means that Mr. Crusoe will O A. incur an opportunity cost of 9 pounds of fish. O B. be able to enjoy a gain of 9 pounds of fruit. OC. incur an opportunity cost of 20 pounds of fish. OD. incur an opportunity cost of 9 pounds of fruit O E. incur an opportunity cost of 99 pounds of fruit
When Mr. Crusoe decides to decrease his consumption of fish from 20 pounds to 9 pounds, he is making a trade-off between fish and fruit.
The concept of opportunity cost helps us understand the implications of his decision.
Opportunity cost refers to the value of the next best alternative foregone when making a choice. In this case, the opportunity cost of reducing fish consumption is the value of the alternative good, which is fruit.
Looking at the table, when Mr. Crusoe is consuming 20 pounds of fish, he can gather 78 pounds of fruit. However, when he decides to decrease fish consumption to 9 pounds, he can only gather 90 pounds of fruit.
Therefore, the opportunity cost of reducing fish consumption from 20 to 9 pounds is 9 pounds of fruit. This means that Mr. Crusoe is giving up the opportunity to enjoy an additional 9 pounds of fruit by choosing to consume less fish.
Hence, the correct answer is option D: incur an opportunity cost of 9 pounds of fruit.
Learn more about pounds here
https://brainly.com/question/30946101
#SPJ11
consider the density of states (dos) of an infinite 3d potential well. mark the correct statement.
The correct statement regarding the density of states (DOS) of an infinite 3D potential well is that it increases with the increase in energy.
The density of states (DOS) refers to the number of states per unit of energy. The DOS of a system gives information regarding the number of states accessible for a particle with a particular energy.
The density of states (DOS) of an infinite 3D potential well is given as:
D(E) = 4πV √(2m) E^(1/2)/h^3
Here
,V is the volume of the well, m is the mass of the particle, h is Planck's constant, and E is the energy of the particle.
Now, let's see how the DOS varies with the energy E. The energy of a particle is given by E = (n_x^2 + n_y^2 + n_z^2)h^2/8mL^2where nx, ny, and nz are the quantum numbers and L is the length of the well.
Therefore, we have E ∝ n^2
where n^2 = nx^2 + ny^2 + nz^2 is the total number of nodes or the square of the magnitude of the wave vector k.
Now, D(E) ∝ E^(1/2) ∝ n
Therefore, the density of states increases with the increase in energy. Thus, the correct statement regarding the density of states (DOS) of an infinite 3D potential well is that it increases with the increase in energy.
Learn more about density of states (DOS) : https://brainly.com/question/31986389
#SPJ11
Kirkland is currently an all-equity firm that has 40,000 shares outstanding with a market price of $40 a share. The current cost of equity is 11% and the tax rate is 30%. Kirkland is considering adding$1.8 million of debt with a coupon rate of 8% to her capital structure. The debt will be sold at par value. What is the levered value of the equity?
a. $220,000
b. $340,000
c. $640,000
d. $1,840,000
With 40,000 shares outstanding at a market price of $40 per share, the current equity value is $1,600,000. By adding $1.8 million of debt, the levered value of equity is reduced by the amount of the added debt, resulting in a final answer of $640,000.
To calculate the levered value of equity, we start with the current equity value of the all-equity firm, which is determined by multiplying the number of shares outstanding by the market price per share. In this case, the current equity value is 40,000 shares * $40 per share = $1,600,000.
When debt is added to the capital structure, the levered value of equity is affected. The value of the added debt is $1.8 million, which will be subtracted from the total firm value to determine the levered value of equity.
Therefore, the levered value of equity is $1,600,000 - $1,800,000 = -$200,000. However, it is important to note that negative values do not make sense in this context, so we take the absolute value of the levered value of equity, resulting in $200,000.
Learn more about capital here : brainly.com/question/32408251
#SPJ11
The following are the results of Larry Inc., a company that sells bobblehead dolls: Expected Sales 5.000 Units $350,000 Sales Total variable costs Contribution margin Total fixed costs Operating income $245,000 $105.000 $30,000 $75,000 Using the above information answer the following questions. What is the contribution margin ratio? HINT: remember the entry rules for percentages. What is the break-even in sales dollars? What is the margin of safety in sales dollars? What is the degree of operating leverage? Entry rules: enter your answer rounded to 2 decimal places. If sales increase by 15%, by what percentage will the operating income increase? HINT: remember the entry rules for percentages.
The contribution margin ratio is 8.6%. The break-even point in sales dollars is $872,093. The margin of safety in sales dollars is -$522,093
The contribution margin ratio is the contribution margin divided by sales. In this case, the contribution margin is $30,000 and sales are $350,000. So the contribution margin ratio is 30,000/350,000 = 0.086 or 8.6% (rounded to 1 decimal place).
The break-even point is the point where the company’s revenue equals its total costs. In this case, we can calculate the break-even point in sales dollars by dividing the total fixed costs by the contribution margin ratio. The total fixed costs are $75,000 and the contribution margin ratio is 0.086 or 8.6%. So the break-even point in sales dollars is $75,000/0.086 = $872,093 (rounded to the nearest dollar).
The margin of safety is the difference between actual sales and break-even sales. In this case, actual sales are $350,000 and break-even sales are $872,093. So the margin of safety in sales dollars is $350,000 - $872,093 = -$522,093 (rounded to the nearest dollar). Since this number is negative it means that Larry Inc. is not making any profit.
The degree of operating leverage (DOL) measures how sensitive operating income is to changes in sales volume. It can be calculated as contribution margin divided by operating income. In this case, contribution margin is $30,000 and operating income is $245,000. So DOL = 30,000/245,000 = 0.122 or 12.2% (rounded to 1 decimal place).
If sales increase by 15%, we can calculate the new operating income as follows:
New operating income = Operating income + (Contribution margin x Sales increase percentage)
New operating income = $245,000 + ($30,000 x 0.15) = $249,500
So the percentage increase in operating income would be:
Percentage increase in operating income = (New operating income - Old operating income) / Old operating income x 100%
Percentage increase in operating income = ($249,500 - $245,000) / $245,000 x 100% = 1.84% (rounded to 2 decimal places).
To know more about operating income
https://brainly.com/question/25895372
#SPJ11
what is consolidated net income for the parent and subsidiary for the year ended december 31, 2021?
The consolidated net income is the sum of the net income of a parent company and its subsidiaries. When a parent company has a controlling interest in one or more subsidiaries, it is required to prepare consolidated financial statements that reflect the financial performance of the entire group rather than just the parent company.
This process involves combining the financial statements of the parent and subsidiaries and eliminating any intercompany transactions to avoid double-counting. The resulting financial statements show the overall financial health of the entire group, including the consolidated net income for the year.
To know more about consolidated net income visit:-
https://brainly.com/question/30281899
#SPJ11
Lockheed Martin has $2,977 (million) worth of Inventory and their COGS are $39,830 (million). Their average holding cost per unit per year is $91.97. What is the average Inventory cost per unit for Lockheed Martin? Instruction: Round your answer to the nearest $0.01. The average Inventory cost per unit :
The average inventory cost per unit for Lockheed Martin can be calculated using the formula: average inventory cost per unit = (average holding cost per unit per year × value of inventory) / cost of goods sold.
Given the values, where the value of inventory is $2,977 million, the cost of goods sold is $39,830 million, and the average holding cost per unit per year is $91.97, we can substitute these values into the formula.
So, the calculation would be: average inventory cost per unit = (91.97 × 2,977) / 39,830. Simplifying this equation gives us a result of approximately $6.85.
Therefore, the average inventory cost per unit for Lockheed Martin is $6.85, rounded to the nearest $0.01.
This calculation provides insights into the cost associated with holding inventory for the company and can be useful for evaluating inventory management strategies and financial performance.
Read more about average inventory cost
https://brainly.com/question/30610659
#SPJ11
The average Inventory cost per unit for Lockheed Martin is $9,060.45.
Is the average cost per unit of Lockheed Martin's Inventory $9,060.45?The average Inventory cost per unit for Lockheed Martin is calculated by dividing their total inventory value of $2,977 million by their cost of goods sold (COGS) of $39,830 million. This calculation yields an average cost per unit of approximately $9,060.45.
Inventory cost per unit is an important metric for evaluating the financial impact of inventory management. It helps companies assess the efficiency and effectiveness of their inventory practices. By understanding the average cost per unit, businesses can make informed decisions about procurement, storage, and sales strategies to optimize their profitability.
Learn more about Inventory cost per unit
brainly.com/question/32604840
#SPJ11
n February 22, Triangle Corporation acquired 9,100 shares of the 200,000 outstanding common stock of Jupiter Co. at $38 plus commission charges of $165. On June 1, a cash dividend of $2.15 per share was received. On November 12, 2,900 shares were sold at $48 less commission charges of $200. At the end of the accounting period on December 31, the fair value of the remaining 6,200 shares of Jupiter Company’s stock was $38.52 per share. Required: Using the cost method, journalize the entries for (a) the purchase of stock, (b) the receipt of dividends, (c) the sale of 2,900 shares, and (d) the change in fair value. Refer to the chart of accounts for the exact wording of the account titles. CNOW journals do not use lines for journal explanations. Every line on a journal page is used for debit or credit entries. CNOW journals will automatically indent a credit entry when a credit amount is entered. In your computations, round per share amounts to two decimal places. When required, round final answers to the nearest dollar.
CHART OF ACCOUNTS
Triangle Corporation
General Ledger
ASSETS
110 Cash
111 Petty Cash
120 Accounts Receivable
121 Allowance for Doubtful Accounts
131 Notes Receivable
132 Interest Receivable
141 Merchandise Inventory
145 Office Supplies
146 Store Supplies
151 Prepaid Insurance
161 Investments-Jupiter Co. Stock
165 Valuation Allowance for Equity Investments
166 Valuation Allowance for Available-for-Sale Investments
181 Land
191 Store Equipment
192 Accumulated Depreciation-Store Equipment
193 Office Equipment
194 Accumulated Depreciation-Office Equipment
LIABILITIES
210 Accounts Payable
221 Notes Payable
231 Interest Payable
241 Salaries Payable
251 Sales Tax Payable
EQUITY
311 Common Stock
312 Paid-In Capital in Excess of Par-Common Stock
321 Preferred Stock
322 Paid-In Capital in Excess of Par-Preferred Stock
331 Treasury Stock
332 Paid-In Capital from Sale of Treasury Stock
340 Retained Earnings
350 Unrealized Gain on Equity Investments
351 Cash Dividends
352 Stock Dividends REVENUE
410 Sales
611 Interest Revenue
612 Dividend Revenue
621 Income of Jupiter Co.
631 Gain on Sale of Investments
641 Unrealized Gain on Trading Investments
EXPENSES
511 Cost of Merchandise Sold
512 Bad Debt Expense
515 Credit Card Expense
516 Cash Short and Over
520 Salaries Expense
531 Advertising Expense
532 Delivery Expense
533 Repairs Expense
534 Selling Expenses
535 Rent Expense
536 Insurance Expense
537 Office Supplies Expense
538 Store Supplies Expense
561 Depreciation Expense-Store Equipment
562 Depreciation Expense-Office Equipment
590 Miscellaneous Expense
710 Interest Expense
721 Loss of Jupiter Co.
731 Loss on Sale of Investments
741 Unrealized Loss on Trading Investments
This journal entry assumes that the investments in Jupiter Co. stock are accounted for using the cost method, which means the investments are initially recorded at cost and subsequent changes in fair value are not recognized.
The dividends received are recorded as dividend revenue. The sale of shares results in a loss on sale, and the change in fair value is recorded through adjusting entries for the valuation allowance and unrealized gain on equity investments. Purchase of Stock: Date: February 22 Debit: Cash: 138,800.00 Commission Expense: 200.00 Loss on Sale of Investments: 11,300.00 Investments - Jupiter Co. Stock: 159,500.00.
learn more about:- Triangle Corporation here
https://brainly.com/question/4427163
#SPJ11
1) a.
Current ratio = Current assets / Current liabilities
= 460/395 = 1.16
Working capital = current assets - current liabilities = 460 -
395 = 65
Net profit margin = Net income / Revenue
= Net prof
Consolidated statements of financial position (in millions of Canadian dollars) ASSETS Cash and cash equivalents Restricted cash Trade and other receivables Other current financial assets Other curren
The current ratio is calculated by dividing current assets by current liabilities, resulting in a ratio of 1.16. The working capital is $65 million. The net profit margin is determined by dividing net income by revenue.
The current ratio is a financial metric that assesses a company's ability to cover its short-term obligations with its current assets. In this case, the current assets amount to $460 million, while the current liabilities amount to $395 million, resulting in a current ratio of 1.16. This indicates that the company has $1.16 of current assets for every $1 of current liabilities, suggesting a relatively healthy liquidity position.
Working capital is calculated by subtracting current liabilities from current assets, yielding $65 million in this scenario. This represents the amount of capital available for day-to-day operations and can be an indicator of a company's short-term financial health.
The net profit margin measures the profitability of a company by comparing net income to revenue. By dividing net income by revenue, this ratio reveals the percentage of revenue that translates into profit. However, without specific figures for net income and revenue, it's difficult to further analyze the net profit margin in this context.
Learn more about net income here:
https://brainly.com/question/14126418
#SPJ11
Current ratio = Current assets / Current liabilities
= 460/395 = 1.16
Working capital = current assets - current liabilities = 460 - 395 = 65
Net profit margin = Net income / Revenue
= Net profit / sales * 100
Debt to assets ratio = Total debt / Total assets = 220/ 5,751 = 0.03
b. For each of the ratios calculated in Part a, calculate the percentage change from prior year. Have they improved or declined?
c. Calculate the following ratios for your company using the financial statements for the current year only: - Fixed Asset Turnover - Return on Equity SHOW ALL WORK and include an analysis for each calculation (explained in Part a).
d. Are net cash flows from operating activities considered healthy or unhealthy in the current year? Why?
e. Briefly skim the annual report provided to you (do not read the entire report – simply skim through the material) and state ONE interesting fact that you learned about the company from the annual report.