1.) Chemist needs 79.02 g of KMnO4 to make 4.00 L of a 0.50 M solution. 2.) You will need to use 0.12 L of 1.50 M solution to make 2.40 L of 0.0750 M solution. 3.) Solution has a molality of 0.00229 mol/kg.
What is molality?Molality is defined as a measure of number of moles of solute in a solution corresponding to 1 kg or 1000 g of solvent.
1.) As, mass = moles x molar mass
Molar mass of KMnO4 is 158.03 g/mol
So, mass = 0.50 mol x 158.03 g/mol = 79.02 g
Therefore, the chemist needs 79.02 g of KMnO4 to make 4.00 L of a 0.50 M solution.
2.)As , C1V1 = C2V2
Here C1 is initial concentration, V1 is initial volume, C2 is final concentration and V2 is the final volume.
1.50 M x V1 = 0.0750 M x 2.40 L
Now, V1 = (0.0750 M x 2.40 L) / 1.50 M
So, V1 = 0.12 L
You will need to use 0.12 L of the 1.50 M solution to make 2.40 L of the 0.0750 M solution.
3.) Formula for molality is: m = (moles of solute) / (kg of solvent)
As, moles = (mass of solute) / (molar mass of solute)
= (20 g) / (58.44 g/mol) = 0.344 mol
m = (0.344 mol) / (150 g / 1000 g/kg) = 0.00229 mol/kg
So, the solution has a molality of 0.00229 mol/kg.
To know more about molality, refer
https://brainly.com/question/1370684
#SPJ1
The following redox reaction occurs betwen the dichromate ion and ethanol:
3CH3CH2OH + 2CrO7^2- + 16H+ => 3CH3COOH + 4Cr^3+ + 11H2O
A chemist uses 26.25 mL of 0.500 M CrO7^2- to titrate a 10.0 mL sample of wine to the equivalence point.
a) What is the [CH3CH2OH] in the wine?
b) The concentration of ethanol in alcoholic beverages is expressed as percent by volume. If a wine is 10% alcohol, it means that there are 10 mL of ethanol for every 100mL of the beverage. The density of ethanol is 0.789 g/mL. Convert your answer in part (a) into percent by volume
Answer:
a) 1,69 M
b)11.55%
Explanation:
a) To determine the [CH3CH2OH] in the wine, we can use the stoichiometry of the balanced equation provided. Since the ratio of CrO7^2- to CH3CH2OH is 2:3, for every 2 moles of CrO7^2- that are consumed, 3 moles of CH3CH2OH are produced. Therefore, we can use the volume and molarity of the CrO7^2- solution to determine the number of moles of CH3CH2OH present in the wine sample.
The number of moles of CrO7^2- used in the titration is (26.25 mL)(0.500 M) = 13.125 moles. Therefore, the number of moles of CH3CH2OH present in the wine sample is (3/2)(13.125 moles) = 19.69 moles
Since the original volume of wine sample was 10.0 mL, the [CH3CH2OH] in the wine is (19.69 moles) / (0.01 L) = 1.969 M
b) To convert the answer in part (a) into percent by volume, we can use the density of ethanol and the conversion factor of 100mL/1L.
The density of ethanol is 0.789 g/mL, so the mass of ethanol in the sample is (19.69 moles) x (46.07 g/mol) = 910.1 g
The mass of ethanol in 100ml is (910.1g) x (100mL/1L) = 91.01 g/100mL
The volume of ethanol in the sample is (91.01 g/100mL) / (0.789 g/mL) =115.5 mL/L or 11.55% by volume.
• Your patient receives Lanoxin 0.075 mg PO daily for cardiac arrhythmia. Available is Lanoxin elixir 50. mcg/mL. How many È mLs will you administer with each dose?
Your patient receives Lanoxin 0.075 mg PO daily for cardiac arrhythmia. Available is Lanoxin elixir 50. mcg/mL. 1.5mls administer with each dose.
What is cardiac arrhythmia ?An arrhythmia of the heart is an irregular heartbeat. When the electrical signals that coordinate the heart's beats fail to function properly, heart rhythm problems occur. Because of the faulty signaling, the heart beats too quickly,too slowly , or irregularly.
Patient receives lanoxin 0.075mg .
Available is 50mcg/ml.
0.075mg = 75mcg
Availanle = 50mcg/ml
50mcg = 1ml
1mcg = 1 ÷ 50ml
75 mcg = 1 ÷ 50 × 75ml
= 1.5ml
Patient receives 1.5mls with each dose.
Thus, Your patient receives Lanoxin 0.075 mg PO daily for cardiac arrhythmia. Available is Lanoxin elixir 50. mcg/mL. 1.5mls administer with each dose.
To learn more about cardiac arrhythmia, follow the link;
https://brainly.com/question/5609708
#SPJ1
directions: each of the following questions or incomplete statements is accompanied by five suggested answers or completions. select the one that best answers the question or completes the statement.
A: The biodiversity of the pond has decreased.
B: The species richness
What is BiodiversityBiodiversity is all life on this earth including plants, animals, fungi and microorganisms as well as the various genetic materials they contain and the diversity of the ecological systems in which they live. This includes the relative abundance and genetic diversity of organisms from all habitats, whether on land, sea or other aquatic systems.
Biodiversity can be classified into three levels:
a. Species diversity
Species or types have the meaning, individuals who have morphological, anatomical, physiological similarities and are able to interbreed with each other (inter-hybridization) which produce fertile offspring to continue their generation.
Another example is the diversity of species in coconut trees, palm trees, areca palm trees and also in palm trees.
b. Genetic diversity
Gene diversity is the diversity of individuals within one type of living thing. Gene diversity results in variations between individuals of the same kind. Examples of diversity at this gene level are white roses, red roses, and yellow roses which have differences, namely different in terms of flower color.
c. Ecosystem diversity
Ecosystem can be interpreted as a relationship or mutual interaction between one living thing and another living thing and also between living things and their environment. Every living thing will only grow and develop in a suitable environment.
Your question is incomplete but most probably your full question was:
Directions: Each of the questions or incomplete statements below is followed by five suggested answers or completions. Select the one that is best in each case.
A) A one-hectare pond is sampled in early September. The sample yields 1 small catfish as well as 17 benthic invertebrates that represent 10 species. If the pond is resampled a year later, which of the following would best indicate that the pond had been adversely affected by adjacent development?
B) A one-hectare pond is sampled in early September. The sample yields 1 small catfish as well as 17 benthic invertebrates that represent 10 species. Which of the following can be estimated from the sample for the invertebrates in the pond?
Learn more about incomplete & complete question at
https://brainly.com/question/1494510.
#SPJ4
The percent of O in Li3PO4 is___% O. (Round to 2 decimal places).
PLEASE HELP
The mass percent of oxygen in the compound lithium phosphate Li₃PO₄ is its ratio of mass to the total mass i.e., 56 %.
What is mass percent ?Mass percent is a common term used to express the composition and concentration of a compound. The mass percent of an element in a compound is the ratio of its mass in that compound to the total mass of the compound multiplied by 100.
The molar mass of the compound Li₃PO₄ = 113 g
(P = 31 g/mol, Li= 6 g/mol, O= 16 g/mol .)
Atomic mass of O = 16 g/mol
mass of 4 oxygen = 64 g.
Mass percent of O in the compound = mass of 4 O/total mass
mass % = 64 g/113 g × 100 = 56%.
Therefore, the mass percent of oxygen in the compound is 56%.
Find more on mass percent :
https://brainly.com/question/9904990
#SPJ1
The compound below exhibits one lone pair. Identify the type of atomic orbital that the lone pair occupies. O ap orbital O an sp3 hybridized atomic orbitalO an sp hybridized atomic orbital O an s orbital O an sp2 hybridized atomic orbital
The type of atomic orbital that the lone pair occupies is an sp² hybridization atomic orbital.
When two atomic orbitals join to generate a hybrid orbital in a molecule, the energy of the individual atoms' orbitals is redistributed to give orbitals of equivalent energy. We refer to this process as hybridization. The atomic orbitals with equivalent energies are mixed together during the hybridization process, which primarily involves the fusion of two s orbitals, two p orbitals, or the mixing of a s orbital with a p orbital or a d orbital. Hybrid orbitals are the new orbitals that are created in this way. More importantly, hybrid orbitals are very helpful in describing the characteristics of atomic bonds and molecular geometry.
sp hybridization
One s and one p orbital in the same main shell of an atom combine to generate two new equivalent orbitals, which is known as sp hybridization. The newly created orbitals are known as sp hybridised orbitals.
It produces 180° angled linear molecules.To create a new hybrid orbital known as a sp hybridised orbital, one's' orbital and one 'p' orbital of equal energy are mixed together in this sort of hybridization.Diagonal hybridization is another name for sp hybridization.Half of each sp hybridised orbital is made up of s and half of it is made up of p.sp² hybridization
Trigonal hybridization is another name for sp2 hybridization.To create the new hybrid orbital known as sp2, one's' orbital and two 'p' orbitals of equal energy are mixed together.Trigonal symmetry was used to generate a mixture of s and p orbitals, which are kept at 1200.The three hybrid orbitals remain in the same plane and are perpendicular to one another by 120 degrees. Each hybrid orbital produced has an's' character of 33.33% and a 'p' character of 66.66%.The triangular planar molecules have a centre atom that is linked to three other atoms and is sp2 hybridised.sp³ hybridization
These form an angle of 109°28' with one another and are pointed at the four corners of a conventional tetrahedron.The sp3 hybrid orbitals are at an angle of 109.280 degrees.25% s character and 75% p character make up each sp3 hybrid orbital.
Ethane (C2H6) and methane are two examples of sp3 hybridization.Learn more about hybridization here :
brainly.com/question/29510593
#SPJ4
which of the following substituents are meta directors? select all that apply. group of answer choices co2et h nh2 no2 oh cl ch3 cf3
The substituents that are meta directors are NO₂, Cl and CF₃.
In electrophilic substitution reactions in aromatic compounds, the position of the substituent on the ring can affect the rate and outcome of the reaction. Substituents can be classified as ortho, meta, or para directors, depending on their ability to direct the electrophile to specific positions on the ring. Substituents that are meta directors, like NO₂, Cl, and CF₃, have a moderate effect on directing electrophiles to the meta position (the position adjacent to the substituent) on the ring. They have a weaker effect than ortho-para directors but stronger than ortho directors.
To learn more about electrophiles visit: https://brainly.com/question/14803468
#SPJ4
if the flask is open to the atmosphere, the mercury levels are equal. for each of the following situations where a gas is contained in the flask, calculate the pressure in the flask in torr, atmospheres, and pascals.
The pressure in the flask in torr is 642 torr, the pressure in atmosphere is 0.845 atm and the pressure on pascals is 8.56 × 10⁴ pa.
Given that :
Atmospheric pressure = 760 mmHg
The difference in h = 118 mm
The pressure in the tank = 760 mmHg - 118 mmHg
The pressure in the tank = 642 mmHg
The pressure in torr = 642 mmHg ( 760 torr / 760 mmHg )
= 642 torr
The pressure in atmosphere = 642 mmHg ( 1 atm / 760 mmHg)
= 0.845 atm
The pressure in pascals = 642 mmHg ( 101325 pa / 760 mmHg )
The pressure in pascals = 8.56 × 10⁴ pa.
To learn more about pressure here
https://brainly.com/question/14281594
#SPJ4
How to calculate and express my answer in one decimal place
The temperature of the object as it is given in the other unit is 105.1 °F.
What is temperature?Temperature is a measure of the amount of thermal energy or heat in a system.
Now we know that to convert from the Celsius to the Fahrenheit temperature that we have to be able to use the formula;
(T°C × 9/5) + 32 = T°F
Then we have that;
T°C = 40.6
Thus we now have that;
(40.6 × 9/5) + 32 =
= 105.1 °F
Thus the object that we have in the farm is going to have a new temperature that we obtain as 105.1 °F
Learn more about temperature:https://brainly.com/question/11464844
#SPJ1
Which particle will complete this reaction
The particle that will complete this reaction is an isotope of zinc with 30 protons and 64 neutrons.
What is an isotope?Isotopes are described as two or more types of atoms that have the same atomic number and position in the periodic table, and that differ in nucleon numbers due to different numbers of neutrons in their nuclei.
There are two main types of isotopes and they include:
stable isotopes and unstable (radioactive) isotopes.In conclusion, there are 254 known stable isotopes.
Learn more about isotopes at: https://brainly.com/question/24698773
#SPJ1
A force of 90n is applied to each cart below which one will accelerate the fastest
The cart with the fastest acceleration is 5 kg cart because its mass is the smallest.
What is mass?Mass can be experimentally defined as a measure of the body's inertia, meaning the resistance to acceleration when a net force is applied.
The parameters given include;
applied force, F_ = 90 N
mass of cart: 5kg, 6kg, 8 kg, 9 kg
According to Newton's second law of motion, the force applied to an object is directly proportional to the product of mass and acceleration of the object.
F_ = ma
The acceleration of the 5 kg cart is calculated as follows;
a = f_ /mass
a = 90/5
a= 18m/s²
The acceleration of the 6 kg cart is 15 m/s² (using Newton's second law)
The acceleration of the 8 kg cart is 11/25 m/s² (using Newton's second law)
The acceleration of the 9 kg cart is 10m/s² (using Newton's second law)
Therefore, the cart with the fastest acceleration is 5 kg cart because its mass is the smallest.
Learn more about mass at: here: https://brainly.com/question/19385703
#SPJ1
Complete question:
A force of 90N is applied to each cart below, which one will accelerate the fastest?
Mass: 5 kg
Mass: 6 kg
mass: 8 kg
Mass: 9 kg
Convert 320 mmHg to kPa
Answer: 42 2/3 kPa
Explanation: To get the approximate answer, divide by 7.5
320/7.5 = 42.66666... = 42 6/9 = 42 2/3 kPa
Which of these is an example of a chemical property?
A. A banana will oxidize quickly in a paper bag.
B. Sodium has a boiling point of 97.79⁰ Celsius.
C. Water has a melting point of 0° Celsius.
D. Titanium has the same density at 3g as it does at 5g.
Answer:
A. A banana will oxidize quickly in a paper bag.
on the website, the contributors all agreed that the average molecular kinetic energy is the same for both he and sf6. which of the following changes would best correct the distribution curve for sf6?
A change in the distribution curve for SF₆ will be observed and the curve will depict a much slower average speed and the shift on the curve will be to the left.
The Maxwell-Boltzmann equation tells about the kinetic theory of gases. It basically defines the distribution of the speeds for a gas at a particular temperature. From this distribution, we can derive the the average speed, most probable speed, and the root-mean-square speed.
The distribution depends mainly on two factors which are the mass and the temperature. Among He and SF₆, SF₆ has a higher mass and shows a shift on the curve. It shows a much slower average speed and the shift on the curve is observed to be towards the left.
To know more about Maxwell-Boltzmann equation here
https://brainly.com/question/26540076
#SPJ4
t question at position 9 which of the following is true concerning the motifs and domains of proteins?
The true statement concerning the motifs and domains of proteins is Separate proteins with similar domains are likely to have a similar function. The correct answe is C.
The biological activity of a protein can occasionally be anticipated by looking for existing proteins with comparable amino acid sequences since proteins with similar structures typically have similar activities.
Finding motifs and domains is a crucial part of biological sequence characterisation. Because freshly acquired protein sequences frequently lack significant similarity with database sequences of known functions over their entire length, making functional assignment challenging, it is crucial to identify unknown protein activities.
In this instance, the identification of brief consensus sequences linked to known functions can help researchers understand how the protein acts. The name "motifs" refers to these consensus sequence patterns.
Your question is incomplete but most probably your full question was
Which of the following is true concerning the motifs and domains of proteins?
Many domains make up a motif.
Every polypeptide chain is limited to one domain.
Separate proteins with similar domains are likely to have a similar function.
All domains of a protein have the same function.
None of the above are true
Learn more about motifs and domain at https://brainly.com/question/2005375
#SPJ4
the potential danger involved with ingesting certain compounds is associated with their solubility in the body's aqueous environment. which of the following would be most soluble in water?
A. It is advisable to base answers to questions on the physical characteristics of organic compounds on general chemistry concepts, particularly those pertaining to bonds polarity and molecular interactions.
It's vital to keep in mind that "likes dissolve likes" while discussing solubility. We are therefore seeking a molecule that most closely resembles the polar makeup of water. The greatest intermolecular force in which water molecules engage is hydrogen bonding; hence, the most soluble molecule should be comparable. Alcohols can also engage in hydrogen bonding, although this capacity declines as the alkyl component of the alcohol molecule grows larger because the hydrogen bonding network is disrupted by the more nonpolar alkyl group. Since ethanol (option (A)) has a smaller alkyl group than propanol (option (B)), it is more capable of forming hydrogen bonds and will thus be more soluble in water.The molecules in choices (C) and (D), a ketone and an ether, respectively, are less soluble in water because, although having polar carbon-oxygen bonds, they lack hydrogen atoms bound to electronegative (FON) atoms, which are necessary for hydrogen bonding. Answer option (A) is the right selection.
(B) Deformation The carbon chain of this molecule is one carbon longer than that of ethanol, despite the fact that the OH group may make hydrogen bonds. As a result, it is less soluble in water.
(C) Deformation Although ketones are capable of forming hydrogen bonds, they lack a dipole moment.
D) distortion Ethers are somewhat polar, but since they cannot form hydrogen bonds, they are not very water-soluble.
Learn more about Bonds here:
https://brainly.com/question/10777799
#SPJ4
The complete question is:
The potential danger involved with ingesting certain compounds is associated with their solubility in the body's aqueous environment. Which of the following would be most soluble in water?
A.CH3CH2OH
B. CH3CH2CH2OH
C. CH3OCH2CH3
Sharla finds a container labeled tungsten. She removes the metal and weighs it and determines the mass is 377.64 grams of tungsten. How many moles of tungsten did she find?
The number of moles in 377.64 grams of tungsten is 2.005 moles.
How to calculate number of moles?The number of moles in a substance can be calculated by dividing the mass of the substance by its molar mass as follows:
no of moles = mass ÷ molar mass
According to this question, Sharla finds a container labeled tungsten. She removes the metal and weighs it and determines the mass is 377.64 grams of tungsten.
Molar mass of tungsten = 183.84g/mol
moles = 377.64g ÷ 183.84g/mol
moles = 2.005 moles
Therefore, 2.005 moles is the number of moles in 377.64g of tungsten.
Learn more about moles at: https://brainly.com/question/26416088
#SPJ1
the nadh generated during glycolysis and the citric acid cycle feeds its high-energy electrons to which of the following?
The NADH generated during glycolysis and the citric acid cycle feeds its high-energy electrons to the electron transport chain (ETC) also known as the oxidative phosphorylation.
The ETC is a series of protein complexes and electron carriers that transfer electrons from NADH and FADH2 to oxygen, creating a flow of electrons through the chain. During glycolysis, the glucose molecule is broken down into two molecules of pyruvate, generating two molecules of NADH in the process. In the citric acid cycle, also known as the Krebs cycle, the pyruvate molecules are further metabolized, generating additional NADH and FADH2 molecules. The NADH and FADH2 molecules are high-energy electron carriers because they have a surplus of electrons. These high-energy electrons are then transferred to the electron transport chain.
learn more about glycolysis here:
brainly.com/question/29604117
#SPJ4
Move to the safety shower if you spill hazardous chemicals on your ________Stand under the shower and _________ the lever. Remove clothing and continue flushing the area for _________
Move to the safety shower if you spill hazardous chemicals on your skin. Stand under the shower and pull the lever. Remove clothing and continue flushing the area for at least 20 minutes.
If you get hazardous chemicals on your skin, you should go to the nearest safety shower right away.
In the event of a spill, the safety shower is a device that is specifically designed to flush chemicals from the skin and clothing.
When you reach the safety shower, stand beneath it and pull the lever to turn on the water flow.
It is critical to remove any contaminated clothing while showering to ensure that all of the chemicals are washed away.
Flush the affected area for at least 20 minutes to ensure that all chemicals have been removed. It is critical to follow these procedures to reduce the risk of injury or chemical exposure.
To know more about Hazardous chemicals,
https://brainly.com/question/30156449
#SPJ4
Question 12 of 25
Most scientists use scientific methods in which of the following orders?
Answer:
Observation and description of a phenomenon or group of phenomena
Formulation of a hypothesis to explain the phenomena
Use of experimentation and/or other forms of data collection to test the hypothesis
Analysis and interpretation of the data collected
Development of a theory or revision of the hypothesis based on the evidence
Repeat the experiment to ensure the results are consistent
Communicate the results to other scientists to have them verify the results.
Explanation:
select the processes that need to occur in order to release all three carbon atoms from pyruvate (once it has been produced by glycolysis) in the form of carbon dioxide.
After glycolysis produces pyruvate, the following procedures must take place in order to release all three carbon atoms from pyruvate in the form of carbon dioxide.
What is pyruvate?A crucial stage in the metabolism of carbohydrates and lipids is the three-carbon molecule pyruvate. It is the result of the glycolysis process, which breaks down glucose to produce ATP, which is a kind of energy.
Pyruvate decarboxylation, which happens first, is the process by which pyruvate is transformed into acetyl-CoA. A sequence of processes take place in the citric acid cycle, commonly referred to as the Krebs cycle or the TCA cycle, where the acetyl-CoA is further degraded.
Enzymes work to convert acetyl-CoA to CO2 during the citric acid cycle, releasing high-energy electrons that are then used to create ATP.
The final step is oxidative phosphorylation, which takes place in the mitochondria's inner membrane. Here, electrons are transferred to the electron transport chain so that the ATP synthase enzyme can pump protons and produce ATP.
The CO2 that is released into the atmosphere is the end result.
To know more about pyruvates, visit:
brainly.com/question/13024735
#SPJ4
choose the one best response for why you discard clean broken glassware, melting point capillaries, pipets or glass test tubes in the broken glass box and not in the regular trash can.
If the shattered glassware is not noticed, there could be potential injury to the janitorial crew. So, clean broken glassware, melting point capillaries, pipets or glass test tubes should always be discarded in the broken glass box. So, option C is correct.
This lab safety advice aims to prevent and/or reduce accidents from broken glass when handling lab glassware.
It is acceptable to collect broken glass that is not contaminated with chemicals, infectious elements, or other dangerous items in certified broken glass bins or 5-gallon buckets with covers.
To reduce the chance of getting hurt, always pick up shattered glass with a brush and dustpan, tongs, or forceps and put it into a receptacle meant for throwing away broken glass. Broken glass must never be handled with care and must never be disposed of in regular trash. There are numerous vendors who sell glass disposal boxes. These containers include a plastic liner for disposing of wet glasses and a lid with a built-in cardboard flap to close the container when it is full.
To know more about lab safety advice
brainly.com/question/28323945
#SPJ4
The complete question is:
Choose the one best response for why you discard clean broken glassware, melting point capillaries, pipets or glass test tubes in the broken glass box and not in the regular trash can.
a) Glassware could still have chemical residues that need to be properly disposed of.
b) If shattered glass is thrown away with regular trash, the stockroom cannot charge for it.
c) If the shattered glassware is not noticed, there could be potential injury to the janitorial crew.
d) Glasses could still contain chemical traces that need to be properly disposed of.
The pressure gauge on a compressed air tank reads 43.2 mmHg. What is the pressure in atm? atm
80 points
The pressure gauge on a compressed air tank reads 43.2 mmHg. 2.94 atmosphere is the pressure.
What is pressure ?The term pressure is defined as the amount of force exerted per area.
Pressure in compressed air tank reads 43.2 pounds per square inch (lb/in),
Then, convert pressure to atmosphere (atm)
Recall that 1 atm = 14.695964 lb/in
Thus, let Z = 43.2 lb/in
To get the value of Z, cross multiply
43.2 lb/in x 1 atm = 14.695964 lb/in x Z
43.2 lb/in atm = 14.695964 lb/in x Z
Z = 43.2 lb/in atm / 14.695964 lb/in
Z = 2.94 atm
Thus, the pressure of the compressed air tank reads 2.94 atmosphere.
To learn more about the pressure, follow the link:
https://brainly.com/question/12971272
#SPJ1
complete combustion of a 1.05 gram sample of the compound witht he soichiometric amound of oxygen gas
The pressure of the gas mixture when it is contained in a 3.00 liter flask at 127˚C is 0.926 atm.
To calculate the pressure of the gas mixture produced by the combustion of the compound, we can use the ideal gas law PV = nRT.
Given:
P : ?V : 3.00 Ln : moles of gas producedR : 0.08206 L atm K-1 mole-1T : 127 + 273 = 400KWe can calculate the moles of gas produced by the combustion reaction by using the balanced equation for the combustion of the compound with oxygen.
CxHy + (x+y/4) O2 → x CO2 + (y/2) H2OGiven that 1 mole of CO2 and 2 moles of H2O is produced.
Moles of CO2 produced = 1.05 / 44.01 = 0.024 moleMoles of H2O produced = 0.048 moleTotal moles of gas produced = 0.024 + 0.048 = 0.072 moles
Plugging in the values we get:
P = (n * R * T) / V P = (0.072 * 0.08206 * 400) / 3.00 P = 0.926 atmSo, the pressure of the gas mixture when it is contained in a 3.00 liter flask at 127˚C is 0.926 atm.
This question is incomplete and should be provided as:
Complete combustion of a 1.05 gram sample of the compound with the stoichiometric amount of oxygen gas produces a mixture of H2O(g) and CO2(g). What is the pressure of this gas mixture when it is contained in a 3.00 liter flask at 127˚C?Learn more about combustion reaction here: brainly.com/question/13251946
#SPJ4
an air bubble of 5 cm3 volume is at the bottom of a lake 35 m deep, where the temperature is 4oc. the bubble rises to the surface, which is at a temperature of 20oc. take the temperature of the bubble to be the same as that of the surrounding water and find its volume just before it reaches the surface. you can treat the air in the bubble as an ideal gas.
The bubble's volume right before it reaches the surface is 23.6 cm³, and let's assume that its temperature is the same as the surrounding water's. You can think of the bubble's air as an ideal gas.
n=p₁V₁/RT₁=(p₀+ρgd)V₁/RT₁
p₁/RT₁=p₂V₂/RT₂
∴V₂=p₁V₁T₂/p₂T₁=(p₀+ρgh)V₁T₂/p₀T₁
= (1.01×10⁵+10³×10×35)(5)(273+20)/1.01×10⁵(273+4)
=23.6 cm³
A theoretical gas called an ideal gas is one that has lots of point particles flying around arbitrarily and not being affected by other particles. The ideal gas notion is advantageous because it complies with the ideal gas law, a condensed equation of state, and is amenable to statistical mechanics analysis. It is frequently possible to loosen the need for zero interaction, for instance, if the interaction is totally elastic or is thought of as point-like collisions.
Many real gases behave qualitatively like an ideal gas, where the gas molecules (or atoms for monatomic gases) take on the function of the ideal particles, under varied conditions of temperature and pressure. Numerous gases, including air mixes and heavier gases including carbon dioxide, nitrogen, oxygen, and hydrogen.
Learn more about ideal gas here:
https://brainly.com/question/8711877
#SPJ4
Zahara Noor wants to create a presentation of different molecules that helped change the world, but she needs help in naming them, so that anyone is able to understand the molecules that she is talking about. Provide the name of the molecule described here:NaCl: Used in cooking and purification purposes.
Answer:
NaCl = sodium chloride
Explanation:
Sodium chloride (NaCl) - used in cooking and water purification for its flavor enhancement and cleansing properties.
The molecule described here is sodium chloride, commonly known as table salt. NaCl is a compound composed of one sodium (Na) atom and one chlorine (Cl) atom bonded together by an ionic bond. It is widely used in cooking to enhance the flavor of various dishes. Salt is also an essential part of our diet as it contains sodium, which is necessary for various bodily functions.
Additionally, sodium chloride is widely used for purification purposes. It is commonly used in water treatment plants to purify water for consumption. The process of adding salt to water helps to remove impurities and contaminants, making it safer to drink. Furthermore, NaCl is used as a preservative for food products to extend their shelf life.
Overall, sodium chloride plays a crucial role in various aspects of our daily lives, including culinary applications and water purification, making it a molecule that has changed the world in many positive ways.
To learn more about sodium chloride here
https://brainly.com/question/33807215
#SPJ2
rank the following compounds in order of decreasing boiling point: potassium bromide ( kbr k b r ), acetylene ( c2h2 c 2 h 2 ), and iodomethane ( ch3i c h 3 i )
1. Potassium bromide (KBr)
2. Iodomethane (CH3I)
3. Acetylene (C2H2)
The boiling point of a compound is determined by the strength of the intermolecular forces between its molecules. Potassium bromide has the strongest intermolecular forces, as it is an ionic compound composed of positively charged potassium ions and negatively charged bromide ions. These ions are held together by electrostatic forces, which are stronger than the other types of intermolecular forces.
Iodomethane has a higher boiling point than acetylene because it has a polar covalent bond and can form dipole-dipole interactions between its molecules. Acetylene, on the other hand, is a nonpolar compound and only experiences London dispersion forces between its molecules. These forces are weaker than the dipole-dipole interactions in iodomethane.
To learn more about compounds:
https://brainly.com/question/26487468
#SPJ4
How many grams of O2 will be formed from 28.9 moles of KCiO3
Answer:
28.9 moles of KClO3 x (3 moles O2 / 2 moles KClO3) = 43.35 moles of O2
To convert moles to grams, you'll need to use the molar mass of O2, which is 32 g/mol.
43.35 moles x 32 g/mol = 1387.2 g of O2
So from 28.9 moles of KCiO3 , 1387.2 grams of O2 will be formed.
Which of the following are correct statements regarding applications of the gas laws and kinetic-molecular theory to the Earth's atmosphere? Select all that apply.A. The gases in the atmosphere behave nearly ideally, so that volume percent equals mole percent.B. The pressure of the atmosphere increases as altitude decreases, and Avogadro's law states that gases are compressible as pressure increases.C. Charles's law helps explain air convection patterns in the lower atmosphere.D. Because of the low density of particles in the thermosphere, the transfer of kinetic energy is very slow and temperatures are very low.
The correct statements viewing applications of the gas laws and kinetic-molecular theory to the Earth's atmosphere are the gases in the atmosphere behave nearly ideally, so that volume percent equals mole percent and Charles's law aids explain air convection patterns in the lower atmosphere.
The gas laws are a bunch of laws that govern the behavior of gases by fitting out associations between the following: the volume inhabited by a gas, the pressure put forth by a gas on the partitions of its container, the absolute temperature of the gas, and the quantity of gaseous substance (or) the number of moles of gas. The five gas laws are Boyle's Law, Charles's Law, Gay-Lussac's Law, Avogadro's Law, and The Combined Gas Law (or the Ideal Gas Law). Under standard situations, all gases exhibit analogous behavior.
To learn more about the gas laws visit here:
https://brainly.com/question/12400719
#SPJ4
A chemical property can be identified _____ changing the composition of a substance. with and without. without. with or without. only by
D) only by changing the composition of a substance, a chemical property can be identified.
What constitutes as a chemical property?An characteristic of a specific material that can be observed during a chemical reaction is called a chemical property. Main chemical properties include chemical stability, flammability, toxicity, heat of combustion, pH value, and rates of radioactive decay.
How can you determine what a substance is made of?The arrangement, ratio, and kind of atoms in chemical substance molecules are referred to as chemical composition. The molar mass of a mixture can be utilized to identify some of its chemical components. You can always just write down the chemical formulae and then multiply the atomic weight of each element by the amount of atoms that comprise each molecule. You can then verify the molar mass you get as a result with the sample's actual mass.
Learn more about chemical property here:
/brainly.com/question/13562531
#SPJ4
A chemical property can be identified _____ changing the composition of a substance.
A)with and without.
B)without.
C)with or without.
D)only by
Give the IUPAC name for this compound pleaseee
The IUPAC name for the compound given in the diagram above is 2,4-dimethylhexane
How do I determine the IUPAC name for the compound?The IUPAC naming of organic compounds follows certain defined principles. These principles includes:
Locate the longest continuous carbon chain. This inturn gives the parent name of the compound.Identify the substituent groups attached to the compound.Give the substituents groups the lowest count by considering their location.Combine the above to generate the name of the compound.Now, let us determine the IUPAC name for the compound using the above principle.
The longest continuous carbon chain is 6. Thus, the parent name is hexaneThe substituent group attached is methylThere are two methyl groups. one is located at carbon 2, and the other at carbon 4Thus, the IUPAC name for the compound is:
2,4-dimethylhexane
Learn more about IUPAC name:
https://brainly.com/question/16180944
#SPJ1