Answer:
The force exerted by the brakes is 14,400,000 N
Explanation:
Initial kinetic energy of truck = 72 MJ
Work done by the breaks, W = Force exerted by the brakes × Distance, D, the truck came to stop
The distance, D, in which the truck came to a stop is given as 5 meters
Given that the initial kinetic energy, KE of the truck that was reduced by the breaks = The work done by the brakes
We have;
W = ΔKE = Change in kinetic energy
ΔKE = Initial kinetic energy - Final Kinetic Energy
Initial kinetic energy, KE = 72 MJ
Final Kinetic Energy = 0 J (Truck stopped)
ΔKE = 72 - 0 = 72 MJ
Therefore we have;
Force exerted by the breaks = W/D = 72 MJ/5 = 14.4 MN. = 14,400,000 N.
Using the free-body diagram, calculate the net force acting on the sled. Is the sled in a state of dynamic equilibrium?
The net force acting on the sled is zero. The sled is in a state of dynamic equilibrium.
Explanation:
The two vertical forces, Fg and Fn, cancel each other out, but I choose to "ignore" them in my explenation, although they remain present at all times.
Since the net force acting on the sled is zero, the sled is in some state of equilibrium...
Whether the sled or a stationary equilibrium or in a dynamic equilibrium, depends on the the motion of the object. If the object is moving then it is a dynamic equilibrium and if the object is not moving, then there is a stationary equilibrium.
Look closely at the picture of the sled and the dogs, and try to find out if the sled is standing still or if the sled is moving with a constant speed.
From the movement of snow around the dogs, you can tell, the sled is moving. It clearly is not stationary or left standing still.
So in this case it must be a dynamic equilibrium. The combined pull of all dogs is shown by Ft = 225 N.
Apparently, the friction is displayed as an opposite force shown as Ff = - 225 N. These two horizontal forces cancel each other out.
Strangely enough, this can be compared with a situation like a "tug of war", in which both sides pull with equal force. Although there can be an enormous tension in the cord, nothing moves.... The same is true here although the sled is moving with a constant speed...
EXTRA
Given is that the sled is moving with a constant speed.
No imagine two situations and try to predict what will happen.... Here we go...
Situation 1 The friction force remains Ff = - 225 N but the dogs suddenly start to pull harder, say with a force of 275 N.
Now the net Force will be greater then zero. In that case it will be 275 - 225 = 50 N in favour of the dogs, which would result in an exeleration of the sled, and thus an increase of the speed...
Situation 2 The friction force becomes greater Ff = - 300 N, but the dogs pull with the same force of 225 N.
Now the net Force will be less then zero. In that case it will be 225 - 300 = -75 N in favour of the friction Force, which would result in slowing down the sled. Perhaps the sled operator applied the brake on the sled, which caused a deceleration of the sled, and thus the speed decreases.
Answer:
yes
Explanation:
edg 2020
Two identical long wires of radius a = 2.80 mm are parallel and carry identical currents of i = 5.00 A in opposite directions. Their center-to-center separation is W = 19.0 cm. Neglect the flux within the wires but consider the flux in the region between the wires. What is the inductance per unit length of the wires?
Answer:
Inductance per unit length, [tex]\frac{L}{l} = 7.02 * 10^{-7} H/m[/tex]
Explanation:
Radius of the wire, a = 2.80 mm
Currents carried by each of the wires, i = 5.00 A
Center-to-Center Separation, W = 19.0 cm
The flux in the wires is given by the equation, ∅ = Li
The Net flux of the region between the wires is given by the equation:
[tex]\phi = \frac{l \mu_0 i}{\pi} ln(\frac{W-a}{a})[/tex]
Divide both sides by l to get the net flux per unit length
[tex]\phi/l = \frac{ \mu_0 i}{\pi} ln(\frac{W-a}{a})\\\phi/l = \frac{ 4 \pi * 10^{-7} i}{\pi} ln(\frac{0.019-0.0028}{0.0028})\\\phi/l = 7.02 * 10^{-7} i\\\frac{Li}{l} = 7.02 * 10^{-7} i\\\frac{L}{l} = 7.02 * 10^{-7} H/m[/tex]
why is urbanization a contribution to pollution?
Answer:
people in urban areas strip the soil of nutrition and makes it difficult to grow crops. people of urban areas consume more energy,food,and water. people in urban areas remove minerals and metals from the ground so, urbanization is a contribution to pollution .
Explanation:
it may help you and give me brainliest
Answer:
pollution and loss of trees not to mention how much electricity we use which doesnt benefit the world.
Explanation: because when we urbanize things we get rid of natural resources around us
A boy of mass 45kg sits 109cm to the left of seesaw. Another boy of mass 29000g wants to balance the seesaw. At what distance he needs to sit?
Answer:
[tex]d_{2}[/tex] = 169 cm
Explanation:
Mass 1 = 45 kg => Force = 450 N
Mass 2 = 29 kg => Force = 290 N
According to principle of moments:
=> [tex]F_{1}d_{1} = F_{2}d_{2}[/tex]
Where [tex]F_{1}[/tex] = 450 N, [tex]d_{1}[/tex] = 109 cm and [tex]F_{2}[/tex] = 290 N
=> (450)(109) = 290[tex]d_{2}[/tex]
=> 49050 = 290[tex]d_{2}[/tex]
Dividing both sides by 290
=> [tex]d_{2}[/tex] = 169 cm
Swamp coolers are effective because _____.
A. the water is colder than the air.
B. the water pulls heat from the room to undergo a phase change.
C. the thermal energy of the water is decreasing.
D. the water's latent heat of vaporization is being pulled from the air.
Answer:
D. the water's latent heat of vaporization is being pulled from the air.
Explanation:
A swamp cooler also generally referred to as the evaporative cooler is an electronic device that uses moisture to cool air. This simply means that, the electronic device works on the principle of evaporation of water to cool the surrounding air.
In swamp coolers, water absorbs large amount of warm air via the evaporative wet cooler pad, so as to evaporate and consequently cooling the air effectively and efficiently.
Swamp coolers are effective because the water's latent heat of vaporization is being pulled from the air.
The latent heat of vaporization can be defined as the energy that is being absorbed by water during evaporation.
The swamp coolers are typically made up of the following essential components, these are;
1. Float.
2. Blower.
3. Pump.
4. Evaporative pad.
5. Water supply valve.
Hence, through the principle of evaporative cooling (latent heat of vaporization), swamp coolers reduces or lower the air temperature in its surroundings.
Answer:
B and D
Explanation:
Differences Between light year and astronomical unit in two points .
Answer:
A light year is the distance light travels in a year. ... And an astronomical unit is the average distance between the earth and the sun. So the distance to the sun is by definition one AU. A parsec is the distance at which one astronomical unit subtends an angle of one second of arc.
Answer: A light year is the distance light travels in a year. ... And an astronomical unit is the average distance between the earth and the sun. So the distance to the sun is by definition one AU. A parsec is the distance at which one astronomical unit subtends an angle of one second of arc
Explanation:
N2 + O2 → 2NO N-N triple bond: 941 kJ/mol O-O double bond: 495 kJ/mol N-O bond: 201 kJ/mol
Answer:
[tex]\large \boxed{\text{761 kJ}}[/tex]
Explanation:
You calculate the energy required to break all the bonds in the reactants.
Then you subtract the energy needed to break all the bonds in the products.
N₂ + O₂ ⟶ 2NO
N≡N + O=O ⟶ 2O-N=O
Bonds: 2N≡N 1O=O 2N-O + 2N=O
D/kJ·mol⁻¹: 941 495 201 607
[tex]\begin{array}{rcl}\Delta H & = & \sum{D_{\text{reactants}}} - \sum{D_{\text{products}}}\\& = & 2 \times 941 +1 \times 495 - (2 \times 201 + 2\times 607)\\&=& 2377 - 1616\\&=&\textbf{761 kJ}\\\end{array}\\\text{The enthalpy of reaction is $\large \boxed{\textbf{761 kJ}}$}.[/tex]
Consider a transition at 5000 Å with a width of 1 Å and a cavity 2 cm3 in volume. How many electromagnetic modes exist in this frequency band for this cavity?
Answer:
total number of modes is 8
Explanation:
attached here is the calculations
Indicar tipo de unión química que presentan los siguientes compuestos. Realizar a representación de Lewis, molecular o iónica, según corresponda: a-CH4 b-SrO c-HBr d-NH3 e-Cl2O f-Li2O g-CO2 h-MgCl2
Answer:
Explanation:
a. CH₄- Covalent bonding(ligação covalente)
b. SrO- ionic bonding (ligação iônica)
c. HBr- Polar Covalent bonding (ligação covalente polar)
d. NH₃ - covalent bonding(ligação covalente)
e. Cl₂O - Covalent bonding (ligação covalente)
f. Li₂O- ionic bonding (ligação iônica)
g. CO₂ - double covalent bonding (ligação covalente dupla)
h. MgCl₂- ionic bonding(ligação iônica)
A projectile is fired with an initial speed of 60.3 m/s at an angle of 34.2 above the horizontal on a long flat firing range.
Part A: Determine the maximum height reached by the projectile.
Part B: Determine the total time in the air.
Part C: Determine the total horizontal distance covered (this is, the range).
Part D: Determine the speed of the projectile 1.20 s after firing.
Part E: Determine the direction of the projectile 1.20 s after firing.
Answer:
A.) H = 58.6 m
B.) T = 6.92 s
C.) 345.12 m
D.) V = 22.13 m/s
E.) Ø = 32.1 degree
Explanation:
Given that the
initial speed U = 60.3 m/s
Angle Ø = 34.2 degree
A.) At maximum height, final velocity V is equal to zero.
Using the third equation of motion under gravity.
V^2 = U sin Ø^2 - 2gH
Substitute for U and g. Where g = 9.8 m/s^2
0 = (60.3 sin 34.2)^2 - 2 × 9.8 × H
1148.78 = 19.6 H
H = 1148.78/19.6
H = 58.6 m
B.) To Determine the total time in the air, let us use the formula
V = UsinØ - gt
At maximum height, V = 0
t = UsinØ/g
Total time T = 2t
Therefore, T = 2UsinØ/g
T = (2 × 60.3 × sin 34.2)/9.8
T = 67.79/9.8
T = 6.92 s
C.) To determine the total horizontal distance covered which is the range, we will use second equation of motion.
S = UcosØT - 1/2gt^2
Where S = range R
g = 0, since the range is not a vertical distance
T = total time
Substitute all the parameters into the formula
R = 60.3 cos 34.2 × 6.92
R = 345.12 m
D.) After 1.2 s firing,
V = UsinØ - gt
Where t = 1.2 s
Substitute into the formula
V = 60.3 × sin34.2 - 9.8 × 1.2
V = 33.89 - 11.76
V = 22.13 m/s
Therefore the speed of the projectile 1.20 s after firing is 22.13 m/s
E.) The direction will be determined by using the formula
t = VsinØ/ g
Cross multiply
VsinØ = gt
Make SinØ the subject of formula
SinØ = gt/V
SinØ = (9.8×1.2)/22.13
Sin Ø = 11.76/22.13
Sin Ø = 0.53
Ø = sin^-1( 0.53 )
Ø = 32.1 degree
Two straight, parallel wires a and b carry currents in opposite directions, and are separated by a distance d. The magnitude of the force exerted by each wire on a segment of length L of the other wire is F. The vector sum of these forces is
Answer:
Zero
Explanation:
The magnetic field due to the first wire on the second wire with current i₁ in the first wire at a distance d from the second wire is B₁ = μ₀i₁/2πd.
The magnetic force due to this field on the second wire of length segment, L and current i₂ is F₁ = Bi₂L = (μ₀i₁/2πd)i₂L = μ₀i₁i₂L/2πd = F
The magnetic field due to the second wire on the first wire with current i₂ in the first wire at a distance d from the second wire is B₂ = μ₀i₂/2πd.
The magnetic force due to this field on the first wire of length segment, L and current i₁ is F₂ = Bi₁L = (μ₀i₂/2πd)i₁L = μ₀i₁i₂L/2πd = F
Since their magnetic fields are in opposite directions, according to the right hand rule, their forces would also be in opposite directions.
So F₁ = F and F₂ = -F
So their vector sum F₁ + F₂ = F +(-F) = F - F = 0
The speed of an electromagnetic wave is a constant, 3.0 × 108 m/s. The wavelength of a wave is 0.6 meters. What is the frequency?
Answer:
The answer to this should be: 5.0 x 10⁸ Hz
Explanation:
The speed, s, of a wave, equals the product of its frequency, ν, times its wavelength, λ:
s = νλ.
As the question states, the speed of an electromagnetic wave is a constant, c, equal to 3.0 × 10⁸ m/s.
Substituting this constant in the equation for the speed of the wave, you get:
c = νλ.
From that equation, you can solve for the frequency to show the inverse realation of frequency and wavelength:
ν = c / λ
Now, you just have to substitute values and compute, leaving you with:
5.0 x 10⁸ Hz
How is it possible to blow a balloon?
Explanation:
To blow up a balloon, start by pinching the neck of the balloon with your index finger and thumb. Then, take a deep breath and put the opening of the balloon in between your lips. When you're ready, loosen your grip on the neck and blow into the balloon opening so the balloon starts to fill with air.May
What is the overall charge of the wall?
Answer:
The overall charge on the wall is zero.
Explanation:
Because the atoms making the wall are neutral i.e. number of positive charges are equal to number of negative charges.
What is the function of the uterus during embryo development?
Answer:
The uterus plays a significant part in the pregnancy, menstruation, zygote implantation, conception, labor, and delivery of the baby along with other essential reproductive system organs.
Explanation:
The uterus is a female reproductive organ that is pare shaped and situated between the urinary bladder and the rectum ins the pelvis. The placenta develops links with the uterine blood vessels that provide the embryo with nutrition through an umbilical cord. When this happens, the uterus delivers signals to the brain to adjust the secretion of the hormone such that releases of more eggs (i.e. ovulation) are halted and the menstrual cycle momentarily stops, thereby verifying the pregnancy. In pregnancy the uterus provides the space and an adequate atmosphere for the fetus to develop safely, it provides feedback to the brain which regulates hormones release. The uterus forms a link between the mother and the baby through the placenta and umbilical cord not only to provide the requisite nutrients and oxygen but also to extract the waste products and purify the blood of the fetus before the fetal organs take over.
Wood has chemical energy which can be used to generate thermal and radiant energy when burned in a fire place which best explains what happens to the total amount of energy in this scenario
Answer:
c i took the test
Explanation:
The total amount of energy in this scenario is transformed into other forms of energy because of the burning process of the wood.
What happens to the total amount of energy in this scenario?The energy present in the wood change into other forms of energy such as heat and radiant energy. We know that during a reaction, matter is transformed into another form with the release of different types of energy.
So we can conclude that he total amount of energy in this scenario is transformed into other forms of energy because of the burning process of the wood.
Learn more about energy here: https://brainly.com/question/13881533
Please someone to help me with this will be very grateful In a light bulb, how is electrical energy transformed into light? and in an LED, will it be the same?
Answer:
LED;
The energy of photons emitted by an LED is dictated by the band gap of the semiconductor used – the energy required to make an electron–hole pair. When an electron and hole recombine in a radiative process, a photon carries away the extra energy.
BULB
In the light bulb, the flow of charge through the filament heats it up and causes it to glow. In this way, the light bulb converts electrical energy to heat energy and light energy. ... 1, chemical potential energy is converted to electrical energy, which is immediately converted to light energy and heat energy
This flow of charge converts chemical potential energy into electrical energy. In the light bulb, the flow of charge through the filament heats it up and causes it to glow. In this way, the light bulb converts electrical energy to heat energy and light energy. bulb have a fillament but LED have no filament they produce energy through clod process but bulb have a filament and they produce energy through hot process
Explanation:
This progression of charge changes over substance expected vitality into electrical vitality. In the light, the progression of charge through the fiber warms it up and makes it shine. Along these lines, the light believers electrical vitality to warm vitality and light vitality.
hope soo u can understand my point
Which vector has an x-component with a length of 4?
Answer:
C.) vector C
Explanation:
From the graph provided:
Four vectors are present :
Vectors a, b, c and d.
The x-component of the vector is its magnitude along the x-axis.
Taking the coordinate of each vector:
Vector a = (1,4) : length of x- component = 1
Vector b = (1, 1) : length of x- component = 1
Vector c = (4, -4) : length of x- component = 4
Vector d = (-3, 4) : length of x- component = - 3
Therefore, vector c has an x-component length of 4
The leaning tower of Pisa is about 56 meters tall. A ball released from the top takes 3.4 seconds to reach the ground. The final velocity of the ball before it hits the ground is 33 meters/second. Assuming that the ball experienced a constant acceleration throughout this descent, calculate the magnitude of the acceleration. A. 0.24 g
Answer:
Magnitude of the acceleration(g) = 9.7 meters/second²
Explanation:
Given:
Height of tower = 56 meter
Time taken = 3.4 second
Final velocity (v) = 33 meters/second
Initial velocity (u) = 0 meters/second
Find:
Magnitude of the acceleration(g)
Computation:
Using first equation of motion:
v = u + at
Magnitude of the acceleration(g)
v = u + gt
33 = 0 + g(3.4)
g = 33 / 3.4
g = 9.7 meters/second²
Magnitude of the acceleration(g) = 9.7 meters/second²
alculate the potential difference if 20J of energy are transferred by 8C of charge.
Answer:
V = 2.5 J/C
Explanation:
Given:
Energy = E = 20 J
Charge = Q = 8 C
Required:
Potential Difference = V = ?
Formula:
V = [tex]\frac{E}{Q}[/tex]
Solution:
V = 20/8
V = 2.5 J/C
Answer:
Given :
✧ Energy transferred = 20J ✧ Charge = 8CTo Find :
✧ Potential differenceUsing Formula :
We know that the electric potential difference is also known as voltage (v).
[tex]{\star{\small{\underline{\boxed{\sf{\red{ V =\dfrac{E}{Q}}}}}}}}[/tex]
✧ Potential difference ✧ E = Energy transferred✧ Q = ChargeSolution :
Substituting the given values in the formula to find potential difference :
[tex]{\dashrightarrow{\small{\pmb{\sf{ V =\dfrac{E}{Q}}}}}}[/tex]
[tex]{\dashrightarrow{\small{\sf{ V =\dfrac{20}{8}}}}}[/tex]
[tex]{\dashrightarrow{\small{\sf{ V = \cancel{\dfrac{20}{8}}}}}}[/tex]
[tex]{\dashrightarrow{\small{\sf{ V = {\dfrac{10}{4}}}}}}[/tex]
[tex]{\dashrightarrow{\small{\sf{ V = \cancel{\dfrac{10}{4}}}}}}[/tex]
[tex]{\dashrightarrow{\small{\sf{\underline{\underline{\purple{V = 2.25}}}}}}}[/tex]
Hence, the potential difference is 2.25V.
[tex]\underline{\rule{220pt}{3pt}}[/tex]
A box is dragged across a floor by pulling on a rope attached to the crate and inclined 25 o above the horizontal. If the coefficient of static friction is 0.64, it requires a force of 350 N to just start it moving. What is the mass of the box
Answer:
[tex]m=35.58 kg[/tex]
Explanation:
Using the first Newton's equation
[tex]\Sum F_{T}=F-mgsin(25)-\mu mgcos(25)=0[/tex]
We just need to solve it for m:
[tex]m=\frac{F}{g(sin(25)+\mu cos(25))}[/tex]
[tex]m=\frac{350}{9.81(sin(25)+0.64cos(25))}[/tex]
[tex]m=35.58 kg[/tex]
I hope it helps you!
Please!!! I need some help!!! I will give Brainliest To anyone who truly helps.
Determine the net force charge acting at q1 (+ 2.0 × 10-5C), caused by q2 (-4.0 × 10-5 C) and q3 (-4.0 × 10-5 C). Be sure to include a free body diagram representing the force acting at q1 in your solution. Determine the net electric field acting at q1.
Answer:
Please INCLUDE a picture.
Explanation:
You did not include a picture, so there is no way to tell how the charges will interact with each other.
Please INCLUDE a picture.
The net force acting on q1 is 3.2 N to the right.
The force on q₁ due to q₂ is:
F1 = k * q₁ * q₂ / r²
where:
k is Coulomb's constant, which is 8.98755 × 10⁹ N m² C⁻²
q₁ is the charge of q₁, which is +2.0 × 10⁻⁵ C
q₂ is the charge of q₂, which is -4.0 × 10⁻⁵ C
r is the distance between q₁ and q₂, which is 0.1 m
Plugging in the values, we get:
F₁ = 8.98755 × 10⁹ N m² C⁻² * 2.0 × 10⁻⁵ C * -4.0 × 10⁻⁵ C / (0.1 m)²
= 6.4 N
The force on q₁ due to q₃ is:
F₂ = k * q₁ * q₃ / r²
where:
k is Coulomb's constant, which is 8.98755 × 10⁹ N m² C²
q₁ is the charge of q₁, which is +2.0 × 10⁻⁵ C
q₃ is the charge of q₃, which is -4.0 × 10⁻⁵ C
r is the distance between q₁ and q₃, which is 0.2 m
Plugging in the values, we get:
F₂ = 8.98755 × 10⁹ N m² C⁻² * 2.0 × 10⁻⁵ C * -4.0 × 10⁻⁵ C / (0.2 m)²
= 16 N
The net force on q₁ is the sum of F₁ and F₂:
Fnet = F₁ + F₂
= 6.4 N + 16 N
= 22 N
The net force on q1 is to the right because both F₁ and F₂ are to the right.
Net electric field
The net electric field acting on q1 is 3.2 N/C to the right.
To learn more about net electric field, here
https://brainly.com/question/30577405
#SPJ2
water is a nonpolar molecule true or false
Answer:
Water is non-polar molecule False
Water is polar molecule because the electronegativity of Oxygen is much greater than electronegativity of hydrogen and it has also a bend shape that is why it is polar molecule.
Explanation:
I hope this will help you :)
False. Water is a polar molecule.
About waterWater (H2O) consists of two hydrogen atoms and one oxygen atom. The oxygen atom has a higher electronegativity, meaning it attracts electrons more strongly than hydrogen.
As a result, the shared electrons in the covalent bonds between hydrogen and oxygen are pulled closer to the oxygen atom, creating an uneven distribution of charge.
This leads to a partial negative charge (δ-) on the oxygen atom and partial positive charges (δ+) on the hydrogen atoms, making water a polar molecule.
More on polarity of water can be found here: https://brainly.com/question/30530422
#SPJ6
What is the magnitude of these two vectors: 101 m 60.0 degrees 85.0 m
Answer:
85.0 please I don't understand
A friend of yours who has not taken an astronomy class looks at your textbook and really likes the picture of the Pleiades, a cluster of stars surrounded by a bluish reflection nebula. She wants to know what causes that beautiful blue glow. To explain it to her, you want to compare the process that causes the blue glow to something that is in your friend's everyday experience. Which of the following terrestrial phenomena is the result of the same type of process that makes a reflection nebula in space?
A. the blueish glow of the flame on a gas stove
B. the blue light you see reflected from a blue sweater
C. the blue colour of the Earth's sky
D. the blue-white colour of the hottest stars
E. the blue feeling you get when you don't do well on an astronomy exam
Answer:
C. the blue colour of the Earth's sky
Explanation:
The Pleiades is a cluster of sister stars that are among the closest star cluster to earth.
The reflection nebula of the Pleiades is due to the scattering of the blue light from the hot blue luminous stars that dominate the star cluster. Th blue light is scattered from dust molecules, thought to be predominantly carbon compound like diamond dusts, and other compounds like iron.
The blue colour of the Earth's sky is the closest terrestrial phenomenon to the reflection nebula. On a clear cloudless day, molecules in the air scatter the blue component of light more than the other component colours of white light, giving the sky its characteristic blue coluor.
The common characteristics of the luminous nebula and the Earth's blue sky is that they both have their light scattered by the presence of small particles.
A test car is driving toward a solid crash-test barrier with a speed of 46 mi/h. Two seconds prior to impact, the car begins to brake, but it is still moving when it hits the wall. After the collision with the wall, the car crumples somewhat and comes to a complete stop. In order to estimate the average force exerted by the wall on the car, what information would you need to collect?
Answer:
we have to measure distances and time, possibly with an automated system since the values are very small
Explanation:
For this exercise we can use the relationship between momentum and momentum
I = ∫ F dt = Δp
F t = m [tex]v_{f}[/tex] - mv₀
In the exercise they indicate that the final speed is zero
F t = - m v₀
F = -m v₀ / t
With this equation we can find what measurements should be carried out.
To find the speed with which the car collides with the wall, less measure the displacement and its time during the braking process before reaching the wall and from here find the speed with which it reaches the wall.
During the impact, we must find the time that the vehicle is in contact with the wall in the first approach is equal to the time that the car takes to reach the final speed of zero.
In summary we have to measure distances and time, possibly with an automated system since the values are very small
calculate the wavelength of a wave if 5 complete waves occupy a length of 20m
The wavelength of the wave will be 4 meters. when 5 complete waves occupy a length of 20m.
What is wavelength?Wavelength is defined as the space between waves' crests, particularly between electromagnetic or sound wave points. A recurring event's frequency is measured by how many times it occurs in a unit of time. To underline the difference from spatial frequency, it is also occasionally referred to as temporal frequency.
There is an inverse relationship between the frequency and the wavelength of the waves as the wavelength increases the frequency decreases and if the wavelength decreases the frequency increases.
Given that a wave has 5 complete waves occupying a length of 20m. The wavelength of the wave will be calculated as below:-
λ = Distance / frequency
λ = 20 / 5
λ = 4 meters
Therefore, the wavelength of the wave will be 4 meters. when 5 complete waves occupy a length of 20m.
To know more about wavelength follow
https://brainly.com/question/6297363
#SPJ2
The standard wave format for any wave is wave. When depicting wave in standard wave format, the direction of motion must be rotated by 90 degrees. Only one of two waves is shown at a time when placing wave in standard wave format.
Answer:
Transverse wave and Longitudinal wave and Electromagnetic wave
Explanation:
An inverted wave is a wave in which the vibrations of the particles are perpendicular to the direction of wave motion. Longitudinal waves, on the other hand, are waves in which the vibrations of the particles are parallel to the direction of wave motion. Electromagnetic waves are waves that do not require medium media for transmission, including radio waves, microwaves, UV lights, etc. Most electromagnetic waves are transverse in nature.Answer:
Transverse wave and Longitudinal wave and Electromagnetic wave
Explanation:
De acuerdo al calendario ecológico 2020, escriba cuanto CO2 produce el Ecuador y en un resumen máximo de 7 líneas, determine porque son importante los humedales en la biodiversidad.
Answer:
43,919.66 Kilotones de Co2 en 2016.
Explicación:
Ecuador produce 43,919.66 Kilotones de Co2 en 2016. Las tierras húmedas son muy importantes para la biodiversidad porque proporcionan hábitat a millones de animales. Alrededor del 35 por ciento de todas las especies amenazadas y en peligro vive en estas tierras húmedas. Estas tierras húmedas son altamente productivas y tienen la capacidad de mejorar la calidad del agua, prevenir la degradación del suelo y proporcionar alimentos a los animales que viven en estas tierras húmedas.
The center of a bar magnet whose magnetic dipole moment is <6,0,0> A·m2 is located at the origin. A second bar magnet whose magnetic dipole moment is <7, 0, 0> A·m2 is located at 0.23 m. What is the vector force on the second magnet due to the first magnet? (Express your answer in vector form.)
Complete Question
The complete question is shown on the first uploaded image
Answer:
The force is [tex]\= F = (-0.001089, 0 ,0)[/tex]
Explanation:
From the question we are told that
The magnetic dipole moment of first magnet is [tex]z_1 = (6,0,0) A \cdot m^2[/tex]
The magnetic dipole moment of second magnet is [tex]z_2 = (7,0,0) A \cdot m^2[/tex]
The location of the second magnetic dipole moment is [tex]x = 0.39 \ m[/tex]
Generally the vector force on the second magnet due to the first is mathematically evaluated as
[tex]\= F =- \frac{\mu_o }{4 \pi} * \frac{6 * z_1 * z_2}{x^4}[/tex]
Where [tex]\mu _o[/tex] is the permeability of free space with value [tex]4\pi * 10^{-7} N/A^2[/tex]
substituting values
[tex]\= F = - \frac{ 4\pi * 10^{-7} }{4 \pi} * \frac{6 * 6 * 7}{0.39^4}[/tex]
[tex]\= F = (-0.001089, 0 ,0)[/tex]
Note the negative sign show that the force is an attraction force