Answer:
The attractive forces between the dust particles and Television Screen is due to static electricity. The free dust particles have some residual charge due to force of friction from air or colliding dust particles while the television screen has an opposite charge. They attract and dust settles on it.If a polythene rod is rubbed with cloth, the rod can lift small pieces of paper. This can be explained by stating that the rod becomes charged. A charged object will attract a neutral object until it touches and then it is repelled.Explanation:
What is the kinetic energy of a 25kg object moving at a velocity of 2.5 m/s
Answer:
78j
Explanation:
78.125J to be exact
The position of an object in simple harmonic motion is described by the following equation: y=(0.50 m)cos(pi/2)t. What is the amplitude of vibration?
A. 0.75 m
B. 0.25 m
C. 0.50 m
D. 1.0 m
Answer:
C. 0.50 m
Explanation:
mark me as brainliest
The amplitude of the vibration with the given equation, y = (0.50) cos (π/2 ×t) is 0.50 m. Thus, option C is correct.
What is Simple Harmonic Motion?Simple Harmonic motion is defined as the periodic motion of the body resulting from the dynamic equilibrium. It is defined as the motion in which the restoring force is directly proportional to the displacement of the body.
Simple Harmonic Motion is defined as the repetitive back-and-forth motion of the central displacement. The maximum displacement of one side is equal to the maximum displacement of the other side.
The simple harmonic motion. F ∝ -x or a ∝ -x, where F is force and a is the acceleration of the body, and x is the displacement. The maximum displacement of the body is called the amplitude of the motion.
The energy is purely kinetic at its mean positions whereas the energy is purely potential at its extreme ends. The harmonic motion is also called oscillatory motion.
From the given, SHM equation, y = A sin(ωt) where A is the amplitude of the wave and ω is the angular frequency of the wave. In the cosine function, y = A cos(ωt + Ф) where Ф is the phase change.
Thus, the amplitude of the vibration is 0.50 m. Hence, the correct option is C.
To learn more about Simple Harmonic Motion:
https://brainly.com/question/30404816
#SPJ2
Determine Average Speed.
Total distance = 800 mi
Total time = 10 hr
Explanation:
Average Speed.=Total distance/Total time=800/10=80m/hour
What type of reaction feels cold to the touch? A. Endothermic, because energy is being released into the surroundings B. Endothermic, because energy is being absorbed from the surroundings C. Exothermic, because energy is being released into the surroundings D. Exothermic, because energy is being absorbed from the surroundings
Answer:
D. Exothermic, because energy is being absorbed from the surroundings
Explanation:
This is true about the Exothemic reaction due to the fact that, the reaction occurs outside the body. During this reaction, the energy being absorbed from the surrounding environment will hit the body surface thereby creating the coldness due to the heat given out from the body being minimal.
Answer:
Endothermic, because energy is being absorbed from the surroundings.
Explanation:
Which of the following has the most kinetic energy?
A. stretching a rubber band
B. a jet flying through the air
C. throwing a paper airplane
D. pitching a baseball
HELPPPPP!
which of the following is a human action that could lead to decreased amounts of greenhouse gases found in the atmosphere, such as carbon dioxide?
A ) Generating energy by burning coal
B ) Deforestation
C ) Driving automobiles
D ) Planting trees
Which of the following areas of the sun is where energy is transferred very slowly, sometimes taking up to 100,000 years, by electromagnetic radiation?
A. the radiation zone
B. the core
C. the convection zone
D. the solar flares
What is angle between the vectors 2i -3j +K
and 3i +2j
?
a. 90°
C. 60°
b. 0°
d. 120°
Answer:
the answer is B
Explanation:
edg 2020
When more energy is released when new bonds are formed. Which bonds are stronger. Please add why
1. The bonds that are formed
2. The bonds that are broken
Answer:
the bonds that are formed
Explanation:
Energy is absorbed in order to break bonds. Energy is released when new bonds are formed. Bond-making is a process of exothermic. Whether the reaction is endothermic or exothermic refers to the difference between the energy needed to break bonds and the energy released when new bonds are formed.
If you are in a car that is being pulled down a 56 m path with a force of 12.5
N, what is the work being done?
Answer:
answer is 700 joules
Explanation:
work is equal to force into displacement
W=12.5*56
700 joules
A crate moves DOWN an inclined plane below with a
diagram for the crate?
Answer:
The answer should be the one on the top in the picture.
Explanation:
Friction is opposing the downward movement of the crate therefore the friction force is pointing upwards. that is why the answer should be the one on the top of the picture.
Why does matter increase in volume when it heats up?
Answer:All three states of matter (solid, liquid and gas) expand when heated. ... Heat causes the molecules to move faster, (heat energy is converted to kinetic energy ) which means that the volume of a gas increases more than the volume of a solid or liquid.
Explanation:well I tried lol she just copied and pasted faster than I could
The moon has a smaller mass than the Earth. If
you were to travel to the moon your weight would
A. Increase
B. Decrease
C. Stay the same
D. Vary with day and night
A force acting toward the center of a curved
or circular path is called
A. Balanced forces
B. Net force
C. Centripetal force
D. Gravity
If dropped from the same height, how would
each ball hit the ground?
Wood Plastic Metal
A. Metal first, then plastic, then wood
B. Wood first, then plastic, then metal
C. Plastic first, then metal, then wood
D. They will all hit at the same time
Answer:
Decrease
Explanation:
If you were on the Moon, which has significantly less mass than the Earth, your weight would: decrease
The point that seemed to be giving me a complicated time was being able to distinguish the difference and meaning of weight and mass and being able to apply that to a problem. I kept mixing up the definitions. For example in homework 3.1, one question asked:
If you were on the moon, which has significantly less mass than the earth, your mass would:
a. increase
b. decrease
c. stay the same
d. become zero
The definition of mass is the amount of matter in an object. The definition of weight is the amount or unit of force. For me, I just had to remember that when it asked about weight, it wasn’t referring how heavy an object is. After I was able to recognize that when it came to weight, questions became easier.
The final and correct answer was decreasing. The answer is because the Moon’s mass is less. This means the gravitational force is less on your body, therefore, your mass is going to be lighter
Which of the following is a valid unit of power?
Kg.m2/s
Kg.m2/ s3
J
Kg2.m2/ s3
Answer:
kg•m^2/s^3
Explanation:
Here, we want to get the valid unit for power
Mathematically, power is time rate of doing work
Work is the product of force and distance
Unit for force is;
kg•ms^-2
work is;
Kg•ms^-2 • s
= kg•m^2•s^-2
Divide through by the s for time;
we have ;
kg•m^2•s^-2/s
kg•m^2•s^-3
And that is;
kg•m^2/s^3
Can someone pls help me. WILL MARK U BRAINLIEST!!!
A bullet of mass 50 g travelling with a speed of 15ms penetrates into a
bag of sand and is uniformly brought to rest in 0.05s.
Find
(a) How for the bullet will penetrate into the bag of sand?
(b) The Average force exerted by the sand ?
Answer:
a) The bullet will penetrate 0.375 meters into the bag of sand.
b) The average force exerted by the sand is 15 newtons.
Explanation:
The statement is incorrectly written. The correct form is presented below:
A bullet of mass 50 grams travelling with a speed of 15 meters per second penetrates into a bag of sand and is uniformly brought to rest in 0.05 second.
a) How far the bullet will penetrate into the bag of sand?
b) The average force exerted by the sand?
b) The average force exerted by the sand on the bullet ([tex]F[/tex]), measured in newtons, is determined by Principle of Linear Momentum Conservation and Impulse Theorem:
[tex]F = \frac{m\cdot (v_{f}-v_{o})}{\Delta t}[/tex] (1)
Where:
[tex]m[/tex] - Mass of the bullet, measured in kilograms.
[tex]v_{o}[/tex], [tex]v_{f}[/tex] - Initial and final speeds of the bullet, measured in meter per second.
[tex]\Delta t[/tex] - Impact time, measured in seconds.
If we know that [tex]m = 0.05\,kg[/tex], [tex]v_{o} = 15\,\frac{m}{s}[/tex], [tex]v_{f} = 0\,\frac{m}{s}[/tex] and [tex]\Delta t = 0.05\,s[/tex], then the average force exerted by the sand is:
[tex]F = \frac{(0.05\,kg)\cdot \left(0\,\frac{m}{s}-15\,\frac{m}{s} \right)}{0.05\,s}[/tex]
[tex]F = -15\,N[/tex]
The average force exerted by the sand is 15 newtons.
a) The distance travelled by the bullet ([tex]\Delta s[/tex]), measured in meters, is determined by application of Principle of Energy Conservation and Work-Energy Theorem:
[tex]\Delta s = \frac{m\cdot (v_{f}^{2}-v_{o}^{2})}{2\cdot F }[/tex] (2)
If we know that [tex]m = 0.05\,kg[/tex], [tex]v_{o} = 15\,\frac{m}{s}[/tex], [tex]v_{f} = 0\,\frac{m}{s}[/tex] and [tex]F = -15\,N[/tex], then the distance travelled by the bullet is:
[tex]\Delta s = \frac{(0.05\,kg)\cdot \left[\left(0\,\frac{m}{s} \right)^{2}-\left(15\,\frac{m}{s} \right)^{2}\right]}{2\cdot (-15\,N)}[/tex]
[tex]\Delta s = 0.375\,m[/tex]
The bullet will penetrate 0.375 meters into the bag of sand.
A 2-cm tall object is located 10 cm in front of a concave lens that has a focal length of -20 cm. Calculate the image distance and the image size. (Describe the image) *
Answer:
image distance =-6.6 7cm
image size=1.3cm
Explanation:
5. If an object has an acceleration of 0 m/s2, then one can be sure that the object is not ____.
a. moving
b. changing position
c. changing velocity
6. If car A passes car B, then car A must be ____.
a. accelerating.
b. accelerating at a greater rate than car B.
c. moving faster than car B and accelerating more than car B.
d. moving faster than car B, but not necessarily accelerating.
7. Which one of the following is NOT consistent with a car which is accelerating?
a. A car is moving with an increasing speed.
b. A car is moving with a decreasing speed.
c. A car is moving at a high speed.
d. A car is changing direction.
8. A fullback is running down the football field in a straight line. He starts at the 0-yard line at 0 seconds. At 1 second, he is on the 10-yard line; at 2 seconds, he is on the 20-yard line; at 3 seconds, he is on the 30-yard line; and at 4 seconds, he is on the 40-yard line. This is evidence that
a. he is accelerating
b. he is covering a greater distance in each consecutive second.
c. he is moving with a constant speed (on average).
Answer: c
Explanation: for #5 it can still be moving, just at a constant speed; therefore, it will be c.
If an object has an acceleration of 0 m/s2, then one can be sure that the object is not changing velocity.
If car A passes car B, then car A must be moving faster than car B, but not necessarily accelerating.
The not consistent with a car that is accelerating is a car is moving at a high speed.
A fullback is running down the football field in a straight line. He starts at the 0-yard line at 0 seconds. At 1 second, he is on the 10-yard line; at 2 seconds, he is on the 20-yard line; at 3 seconds, he is on the 30-yard line; and at 4 seconds, he is on the 40-yard line. This is evidence that he is moving with a constant speed (on average).
What is Acceleration?Acceleration is the rate of change of the velocity of an object with respect to time. Accelerations are vector quantities (in that they have magnitude and direction). Speed is the distance covered in a unit of time while acceleration is the rate of change in speed. The unit of speed in the metric system is meters per second (m/s) while that of acceleration is meters per second squared (m/s2). Speed is a scalar quantity while acceleration is a vector quantity.To learn more about acceleration and speed, refer to: https://brainly.com/question/25086037
#SPJ2
A minibus drives with a constant speed of 32 km/h. How long will it take to travel a distance of 48 kilometers?
Distance covered = (speed) x (time)
Time = (Distance covered) / (speed)
Time = (48 km) / (32 km/hr)
Time = (48/32) hr
Time = 1.5 hrs (1 hour 30 minutes)
Please HELP ME If the motion of an object changes, what must be true about the forces acting on that object?
Answer:
If there is a net force acting on an object, the object will have an acceleration and the object's velocity will change. ... Newton's second law states that for a particular force, the acceleration of an object is proportional to the net force and inversely proportional to the mass of the object.
Explanation:
If the motion of an object changes, the net force on the object is greater than zero or the forces acting on the object is unbalanced.
According to Newton's second law of motion, the force applied to an object is directly proportional to the product of mass and acceleration of the object. The object will move in the direction of the applied force.
When the net force on an object is zero, the object will be remain at rest.
However, when the net force on object is greater than zero, the object will move in the direction of the greater force.
Thus, we can conclude that if the motion of an object changes, the net force on the object is greater than zero or the forces acting on the object is unbalanced.
Learn more here:https://brainly.com/question/19887955
According to Newton’s second law of motion, what is force equal to?
Answer:
Force is equal to Mass Multiplied by Acceleration
F = M x A
Answer:
Newton's second law of motion is F = ma, or force is equal to mass times acceleration.
ILL GIVE BRAINLIEST !!!!!!!!!!! Do some research, and look up the difference between the zinc-carbon battery described on the
previous page, and the alkaline battery (shown at the left), which is another common dry cell that we
use every day. What are the electrodes made of in the alkaline battery? The electrolyte? Does one type
have an advantage over the other?
Create a few paragraph essay describing your findings to your teacher.
Answer:
The alkaline battery gets its name because it has an alkaline electrolyte of potassium hydroxide instead of the acidic ammonium chloride or zinc chloride electrolyte of the zinc-carbon batteries. An electrolyte is a substance that produces an electrically conducting solution when dissolved in a polar solvent, such as water. The dissolved electrolyte separates into cations and anions, which disperse uniformly through the solvent. Electrically, such a solution is neutral.Advantages. One of the advantages of alkaline batteries over other primary batteries and rechargeable batteries is that it has higher energy density. It has longer shelf life than batteries with chloride-type electrolyte. It could last to up to seven years unused, losing about five percent of its energy every year.
Explanation:
If 20 N force does 400 J
of work to move an
object, how far does the
object move?
Answer:
20
Explanation:
W = F*d
400 = 20*d
d = 20
Variables in physics often include a subscript. What are subscripts used for in physics?
A.) As a numerical coefficient used in multiplication
B.) To accurately juxtapose two congruent terms.
C.) To indicate different versions of the same variable.
D.) To indicate multiplication of the variable.
Answer:
C.) To indicate different versions of the same variable.
Explanation:
Variables in physics often include a subscript. These subscripts are used for indicating different versions of the same variable in physics.
Basically, subscripts are used to represent the beginning (initial) and ending (final) position or point of a variable in physics.
For example, we would look at Gay Lussac' Law of gases.
Gay Lussac law states that when the volume of an ideal gas is kept constant, the pressure of the gas is directly proportional to the absolute temperature of the gas.
Mathematically, Gay Lussac's law is given by;
[tex] PT = K[/tex]
[tex] \frac{P1}{T1} = \frac{P_{2}}{T_{2}}[/tex]
Where;
[tex] T_{1} [/tex] represents the initial temperature.
[tex] T_{2} [/tex] represents the initial temperature.
[tex] P_{1} [/tex] represents the initial pressure.
[tex] P_{2} [/tex] represents the initial pressure.
Note: 1 and 2 are the subscript while T and P are the variables.
What will be the value of both charges if they are 5 cm apart and suffer a
attraction force of 5.2 N.
Answer:
[tex] \boxed{q = 1.2 \times {10}^{ - 6} C}[/tex]
Explanation:
[tex]f_e = \frac{{q}^{2}k }{ {r}^{2} } \\ q = \sqrt{ \frac{f_e( {r}^{2} )}{k} } = \sqrt{ \frac{5.2(5 \times {10}^{ - 2} )^{2} }{9 \times {10}^{9} } } \\ q =\sqrt{ \frac{5.2(5 \times {10}^{ - 2} )^{2} }{9 \times {10}^{9} } } = \sqrt{ \frac{0.013}{9 \times {10}^{9} } } \\ q = 1.2 \times {10}^{ - 6} [/tex]
HELPP!! what is not true about mitosis??
A. The chromosomes in the daughter cells half the number from the parent cell.
B. The chromosomes in the daughter cells are the same number as the parents cell.
C. Each nuclei is identical to the parent nucleus.
D. The four main stages are prophase,metaphase,anaphase, and telophase.
Answer:
I think its A
Explanation:
Which has a larger acceleration, a car or a person running?
Answer:
A car
Explanation:
Which is not an Ultimate Frisbee rule?
Draw the position vs. time graph for a person walking at a constant speed of 1m/s for 10 seconds. On the same axes, draw graph for a person running at a constant speed of 4m/s
Plot a graph, constant speed of movements represented as straight lines. Time on X axis (seconds) and position on Y axis (metres) , calculated by moving, e.g 4metres in a second.
A phonograph record 0.15 m in its radius rotates 18 times per 90 seconds what is the frequency?
Answer:
The frequency of the phonograph record is 0.2 Hz
Explanation:
The frequency of an object moving in uniform circular motion is the number of completed cycles the object makes in a specified time period
The given parameters of the phonograph record are;
The radius of the record = 0.15 m
The number of times the phonograph record rotates, n = 18 times
The time it takes the phonograph record to rotate the 18 times, t = 90 seconds
The frequency of the phonograph record, f = (The number of times the phonograph record rotates) ÷ (The time it takes the phonograph record to rotate the 18 times)
∴ The frequency of the phonograph record, f = n/t = 18/(90 s) = 0.2 Hz
The frequency of the phonograph record = 0.2 Hz.