why does it make sense for the valence electrons to increase going across a period?

[tex]▪▪▪▪▪▪▪▪▪▪▪▪▪  {\huge\mathfrak{Answer}}▪▪▪▪▪▪▪▪▪▪▪▪▪▪[/tex]

Here's the procedure to Crack an egg ~

Step 1 ~

Step 2 ~

Step 3 ~

Answer:

The Brazilian Santos Dumont

Explanation:

Santos Dumont created the 14 Bis airplane, the first airplane to perform a flight through 200 meters im Paris, France, in 23 October 1906

Orville and Wilbur Wright were the first two to actually invent the aeroplane. These American brothers also designed and flew their first creation after making it in their bicycle shop in December 17, 1903.

I hope this helps! :)

it is a 0 degrees on the Kelvin scale

it is also the lowest on the thermometer

also the particles stop moving and all disorder disappears.

Answer:

Gunpowder was discovered somewhat inadvertently by Chinese alchemists, who were trying to develop an elixir of immortality. If you're not aware, there are three primary components to gunpowder: saltpeter (potassium nitrate), sulfur, and charcoal. ... The use of sulfur by the Chinese is also ancient.

Explanation:

Answer:

wait what?

Explanation:

brainliest pls

Answer:

{B}

Explanation:

Answer:

inclined plane, a simple machine consisting of a sloping surface, used for raising heavy bodies. The force required to move an object up the incline is less than the weight being raised, discounting friction

Explanation:

The steeper the slope, or incline, the more nearly the required force approaches the actual weight. The steeper the slope, or incline, the more nearly the required force approaches the actual weight.

Answer:

yes because on the left side 4 hydrogen in right side 4 hydrogen on the left side 2 oxygen in the right side 2 oxygen

Answer:

The Law of Conservation of Mass states that the mass of the system must remain constant over time as the system's mass cannot change because energy is not created nor destroyed. To tell if a chemical equation meets this law, check to see if the number of atoms is the same on both sides of the chemical equation.

Reactant Side:

Product Side:

Remember, when counting the atoms in a equation the subscript is the number that represents the quantity of that specific atom. Subscripts are numbers that come after a symbol and below. If an element does not have a subscript, then it is understood that the subscript is 1.  The coefficent represents the quantity of molecules, the coefficient multiplies everything in the formula.

Answer:

Carbon dioxide, when present in sufficient amounts, will bind with water to form carbonic acid, which is capable of dissociating into bicarbonate and hydrogen ions.

Explanation:

With the help of carbonic anhydrase which further catalyzes the reaction to convert carbonic acid back into carbon dioxide and water. The carbon dioxide is then expelled from the lungs.

Answer:

4.6 grams CuCl2

Explanation:

Since molarity is a representation of moles per liter, we first want to convert 450. mL to liters:

450. mL * 1 L/1000 mL = 0.450 L

Now, we can use this number and the molarity to figure out the answer:

0.075 M means that for every liter, there is 0.075 moles of CuCl2.  Thus, we can multiply the amount of moles per liter by the number of liters of solution.

0.075 moles/1 L * 0.450 L = 0.03375 moles

Then, we need to round this to the appropriate number of significant figures, which gives us:  

0.034 moles CuCl2

Next, we can find the grams of CuCl2.  To do this, we first need to find the molar mass of CuCl2.  The molar mass of Cu is 63.546 g/mol and the molar mass of Cl is 35.453 g/mol, so the molar mass of CuCl2 is as follows:

(1 Cu * 63.546) + (2 Cl * 35.453) = 134.45 g/mol CuCl2

Now, we can multiply the grams per mole by the number of moles of CuCl2 in our solution:

134.45 g/mol * 0.034 moles = 4.5713 grams = 4.6 grams CuCl2, rounded to the appropriate significant figures.

The molality of the solution is 1.4 moles per kilogram (molal).

The molality of the solution is equal to the number of moles of sugar (solute) divided by the number of kilograms of water (solvent). Hence, the molality is determined below:

[tex]m = \frac{3.5\,mol}{2.5\,kg}[/tex]

[tex]m = 1.4\,\frac{mol}{kg}[/tex]

The molality of the solution is 1.4 moles per kilogram (molal).

We kindly invite to check this question on molality: https://brainly.com/question/4580605

Answer:

(iii):

Reaction 1: Addition

[ We added chlorine to 2-propene ]

Reaction 2: Substitution

[ We substituted hydroxyl ion with chloride ion ]

Reaction 3: Oxidation

[ Acidified permanganate solution is a strong oxidizing agent. So we oxidized propanol to propanoic acid ]

Reaction 4: Acid - base

[ A base (Sodium hydroxide) is added to an acid (propanoic acid) to form a neutral salt ( Sodium propanoate ) ]

The final temperature of the cup may be less than accurate thereby affecting the entire results of the experiment carried out using the cup.

A styrofoam cup is an insulated material. A styrofoam cup prevents heat gain or looses from the cup. Heat is gained by the water inside the styrofoam cup. The cup prevents exchange of energy with the environment.

When water is lost from the styrofoam cup, the final temperature of the cup may be less than accurate thereby affecting the entire results of the experiment carried out using the cup.

Learn more:  https://brainly.com/question/8646601

Answer:

320 gm

Explanation:

4 Fe + 3 O2 ----> 2 Fe2O3 How many moles of iron(III) oxide, Fe2O3 , will be produced if 4 moles of iron, Fe, are consumed

for every 4 moles of Fe, 2 moles of Fe2O3 are produced.

Fe2O3 has a molar mass of (56 X 2) + (16 X 3) = 112 + 48 =160

160 X 2 =320 gm

Answer:

The answer is the first one.

Explanation:

The lower a pH level the higher the the number hydrogen ions present in the acid's container.

ph = - log(H)

4 = - log(H)

- 4 = log(h)

10^-4 = H+

1 * 10^-4 = H +

ph = - log(H)

ph = 2

- 2 = log(H)

10^-2 = H

1*10^-2 = h

Something the power - 2 is 100 times greater than something with the power of -4

Answer:

the guy above is correct

Explanation:

[tex] \large \text{Answer} \\ \\ \\ \\ \\ \\ \\ \\ \\ \\ \\ \\ \\ [/tex]

Boiling points,conductivity and colours contain only physical properties

Bad , fad is the answer check

Answer:

Nitrogen

Explanation:

Pure sugar is sucrose C12H22011

Since intermolecular forces is stronger in a solid than a liquid, then NaCl has stronger intermolecular forces than H2O.

Intermolecular forces exists between molecules of the same or different kinds. Water has a dipole moment hence it can interact effectively with the ions in NaCl. This leads to an ion dipole interaction that results in the dissolution of NaCl in H2O.

NaCl is a solid and water is a liquid. Since intermolecular forces is stronger in a solid than a liquid, then NaCl has stronger intermolecular forces than H2O.

Hence, the best argument that compares the intermolecular interactions in water and NaCl is; salt is a solid and water is a liquid, so water has stronger intramolecular forces.

Learn more: https://brainly.com/question/12108425

D or A im not fully sure about my answer on that

Answer:

1. weak acid

2. weak base

3. weak acid

4. neutral

5. acidic

6. weak base

Explanation:

You can use a pH level scale like the one I attached, to determine each solution.

Answer:

The cause of the color "white" in wine is because the grape's skin is removed before fermentation.

The cause of the color "red" in wine is because the grape's skin is still intact while fermentation

Considering the definition of ideal gas law, the volume of the Krypton gas is 3840 mL.

An ideal gas is a theoretical gas that is considered to be composed of point particles that move randomly and do not interact with each other. Gases in general are ideal when they are at high temperatures and low pressures.

The pressure, P, the temperature, T, and the volume, V, of an ideal gas, are related by a simple formula called the ideal gas law:  

P×V = n×R×T

where P is the gas pressure, V is the volume that occupies, T is its temperature, R is the ideal gas constant, and n is the number of moles of the gas. The universal constant of ideal gases R has the same value for all gaseous substances.

Now, taking into account this law, and isolating the pressure variable (P), you get:

[tex]V=\frac{nxRxT}{P}[/tex]

In this case, you know:

Replacing in the ideal gas law:

[tex]V=\frac{0.119 molesx0.082 \frac{atmL}{moleK}x298K}{0.756579 atm}[/tex]

Solving:

V=3.84 L= 3840 mL (being 1 L=1000 mL)

Finally, the volume of the Krypton gas is 3840 mL.

Learn more:

https://brainly.com/question/4147359?referrer=searchResults

Answer:

C

Explanation:

[tex]▪▪▪▪▪▪▪▪▪▪▪▪▪  {\huge\mathfrak{Answer}}▪▪▪▪▪▪▪▪▪▪▪▪▪▪[/tex]

Blank # 1 - keep safe distance from the burner

Blank # 2 - Place the equipments on the right place after use

Blank # 3 - perform experiments with proper lab equipment and safety tools

Blank # 4 - Don't break any test tube or lab equipment

(maybe it can be hazardous)

Answer:

4 enzymes responsible for digestion:

1. Salivary amylase ---- substrate: Starch ---- end-product: Maltose  

2. Lipase  ---- substrate: Lipids (fats and oils) ---- end-product: Fatty acids and glycerol

3. Maltase ---- substrate: Maltose ---- end-product: Glucose

4. Protease ---- substrate: Protein ---- end-product: Amino acids

Answer:

Electrical Bonding Investigation Data Quick Check

Explanation:

B. Heat energy is added to the substance, weakening the electrica attraction between molecules.

C. Both the melting point and boiling point are lower

C. The lone pairs of electrons in the oxygen atom causes the molecule to be bent; the oxygen atom has a particle negative charge, while the hydrogen atom have particle positive charges

D. Phase change

C. At each plateau