Grasses can grow where they could not earlier because the soil conditions, water volume, or rate of sunlight have evolved.
Each species of plant requires specific conditions to thrive. These conditions include:
Nutrients from the soil.SunlightSpecific amount of water.This implies that if the conditions for a specific species are not provided in terms of sunlight, radiation, and water, the plant will not grow in that specific zone. In the same way, if the conditions of a zone change and they are not suitable for a plant species the plant will grow even if this was not possible before.
This key idea is the reason why some plants including grasses can now grow in zones where they did not exist before. Some of the factors that have contributed to this are:
Fertilization: This provides soils with necessary nutrients.Climate change: This has affected climate patterns, and therefore it can increase or decrease radiation.Irrigation: This increases the amount of water available for plants.Learn more about grass in: https://brainly.com/question/3671945
PLEASE HELP!!!
ILL MARK AS BRAINIEST AND GIVE YOU 30 POINTS!!!
Answer:
did u get it yet
Explanation:
Explain what happens to water during electrolysis. Is this a chemical reaction or phase change?
By definition, electrolysis is the use of an electric current to cause a chemical reaction which wouldn't otherwise happen. In a chemical change, bonds are either broken or formed. Electrolysis is a chemical change because, in the process of electrolysis, bonds are broken or formed.
Formulate a hypothesis based on something recently observed.
And How could this hypothesis be tested?
Answer:
If garlic repels fleas, then a dog that is given garlic every day will not get fleas. Bacterial growth may be affected by moisture levels in the air. If sugar causes cavities, then people who eat a lot of candy may be more prone to cavities.
Explanation:
what is a “ medium” in regards to waves ?
Part A
Before you design your model village, write down the problems you observed in task 1. What were the largest risks to the community? What happened to the homes?
The largest risks while designing a model to withstand a village include that the model does not mitigate the effects of the tsunami or only mitigates the effects partially, which would cause damages to the homes.
Designing a model to withstand the effect of any natural phenomenon such as an earthquake, fire or tsunami is not an easy task and will require the following cycle:
Designing the model.Testing the model.Making changes or designing a new model.In the case of a model for tsunamis, it is likely the following problems occur:
The model does not protect the houses from tsunamis.The model does not protect the houses completely.This would lead to negative effects such as:
Damages in the houses.Dead or injured people.Destruction of infrastrcture.Note: This question is incomplete because the context is missing; here is the missing part.
Protecting Your Model Village from Tsunamis this task, you will design a model village to withstand the effects of a tsunami.
Learn more about tsunami in: https://brainly.com/question/1126317
The particles in a metal are held together by strong __________ bonds. What word describes the type of bond to complete this sentence?
Answer:
metallic
Explanation:
The dislocated electrons moving around the protons create opposite charges with electrostatic attraction between them that are very strong, and are called metallic bonds.
The particles in a metal are held together by strong metallic bonds . The metals forms crystalline solids with highly ordered lattice structure.
What are metals?Metals are electropositive elements. They are rich in electrons and easily donate their electrons with non-metals to form ionic bonds. Metals gain positive charge by losing electrons.
Metals in periodic table are classified as s block elements that are alkali metals and alkaline earth metals and d-block elements that are transition metals.
Metals forms highly ordered crystal lattice 3 D structures in which metal ions negative ions or electrons are bonded by strong intermolecular force called metallic bonds and the free electrons are located in the interstices.
These electrons can delocalize and conduct thermally and electrically.Hence, the bond which hold the particles in a metal is called metallic bond.
To find more on metallic bonds, refer here:
https://brainly.com/question/16026653
#SPJ2
Helppppp asaapppppp plzzzzzz
Answer:
Alright the very first thing you need to do is balance the equation:
2HCl + Na2CO3 -----> 2NaCl + CO2 + H2O
Now we need to find the limiting reactant by converting the volume to moles of both HCl and Na2CO3.
Volume x Concentration/molarity = moles
0.235L x 0.6 M = 0.141 moles / molar ratio of 2 = 0.0705 moles of HCl
0.094L x 0.75 M = 0.0705 moles /molar ratio of 1 = 0.0705 moles of Na2CO3
Since both of the moles are equal, it means the entire reaction is complete (while the identification of limiting reactant may seem like an unnecessary step, it's quite essential in stoichiometry, so keep an eye out) and there is no excess of any reactant.
Now we know that the product we want to calculate is aqueous so, following the law of conservation of mass, we should add both volumes together to calculate how much volume we could get for NaCl.
0.235 + 0.094 = 0.329L of NaCl
Now we apply the C1V1 = C2V2 equation using the concentration and volume of Na2CO3 because it's molar ratio is one to one to NaCl (You can also use HCL, but you have to divide their moles by 2 for the molar ratio) and the volume we just calculated for NaCl.
(0.75M) x (0.094L) = C2 x (0.329L)
Rearrange equation to solve for C2:
(0.75M) x (0.094L) = C2
(0.329L)
C2 = 0.214 M (Rounded)
When the reaction is finished, the NaCl solution will have a molarity concentration of 0.214 M.
A sample of a certain gas has a volume of 452 mL at 711 mmHg and 26 degrees C. What would be the volume of this same sample of gas if it were measured at STP
The volume of this same sample of gas if it were measured at STP is 386.09mL
HOW TO CALCULATE VOLUME:
The new volume of a gas sample can be calculated using the following expression:
P1V1/T1 = P2V2/T2
Where;
P1 = initial pressureP2 = final pressureV1 = initial volumeV2 = final volumeT1 = initial temperatureT2 = final temperatureAccording to this question, a sample of a certain gas has a volume of 452 mL at 711 mmHg and 26°C (299K).
(711 × 452)/299 = 760 × V2/273
1074.82 = 2.78V2
V2 = 1074.82 ÷ 2.78
V2 = 386.09mL
Therefore, the volume of this same sample of gas if it were measured at STP is 386.09mL.
Learn more about volume at: https://brainly.com/question/754925?referrer=searchResults
What is the pH of a substance that has [H+] = 0.0081?
8.1
-1.09
-8.1
1.09
What is the mass of air in room
Answer:
the mass of the air in the room is 4.96512 kg ( in 0°C)
Which model of the atom is thought to be true?
A. Protons, electrons, and neutrons are evenly distributed throughout the volume of the atom.
B. The nucleus is made of protons, electrons, and neutrons.
C. Electrons are distributed around the nucleus and occupy almost all the volume of the atom.
D. The nucleus is made of electrons and protons.
Answer:
Hi the answer should be B or 2
Explanation:
Hope this helps!
Knowing that the solubility of a salt at 80°C is 45g/100 g of H,O, calculate the mass of water required for dissolve 250 g of this salt at 80º C.
The mass of water required will be approximately [tex] \bf = 555.6\: g [/tex].
To solve this question, just make a simple rule of three between the amount of salt dissolved at 80ºC and the mass of water:[tex]\qquad[/tex] 45g of salt [tex] \sf \longrightarrow[/tex] 100g of H₂O
[tex]\qquad[/tex] 250g of salt [tex] \sf \longrightarrow[/tex] x g of H₂O
[tex]\qquad[/tex] [tex]\red{\twoheadrightarrow\bf45\times x = 250\times 100}[/tex]
[tex]\qquad[/tex] [tex]\twoheadrightarrow\sf45x=25000[/tex]
[tex]\qquad[/tex] [tex]\twoheadrightarrow\sf x=\cancel{\dfrac{25000}{45}}[/tex]
[tex]\qquad[/tex] [tex]\red{\twoheadrightarrow\bf x = 555.6\:g}[/tex]
Therefore, knowing that the solubility of a salt at 80ºC is 45g/100g of water (H₂O), the mass of water needed to dissolve 250g of this salt at 80ºC will be [tex] \red{\bf = 555.6\: g }[/tex]__________________________________________________
How many molecules are present in this formula? 3H2 (SO)4
Molecules are formed when two or more atoms chemically bond together. In 3H₂(SO)₄, three molecules are present.
What are molecules?Molecules are the smallest unit present in any compound and are formed by a group of atoms. A number denoted in front of the chemical species is the coefficient that represents the number of molecules.
The coefficient present in front of the reactant or the product in a chemical reaction gives the number of the molecules present in a compound. As three is denoted in front of the sulphuric acid, hence will be the number of the molecules.
Therefore, there are three molecules present in sulphuric acid.
Learn more about molecules here:
https://brainly.com/question/22055640
#SPJ1
True or false pls sue tmrps
Answer:
5. False
Explanation:
Drinking contaminated water causes jaundice
can somebody please help me here ? i wanna make sure of my answer..
Answer:
[Unfortunately] Answer is A
Explanation:
You should know that 'liquid' is a state of matter and aqueous means that there is water present.
-It is mentioned that barium chloride is a solution. So you can cut off the C option.
-Barium sulfate is a salt which means it's a solid, so you can cut off the D option.
We now have A and B as the only options remaining.
-Dilute sulfuric acid is definitely not a liquid because water is present. (dilute indicates that there is a greater proportion of water)
The answer should be A.
13. A natural flow of groundwater that has
reached the surface is a(n)
a. spring.
c. aquifer.
b. well.
d. travertine.
A natural flow of ground water that has reached surface level is call a spring.
Water moves underground downward and sideways, in great quantities, due to gravity and pressure.
A spring is the result of an aquifer being filled to the point that the water overflows onto the land surface. They come in different sizes, from intermittent seeps, which flow only after much rain, to huge pools flowing hundreds of millions of gallons daily.
Learn more:
https://brainly.com/question/2375655
Pls help if you only know the correct answer! Thanks! :)
18. the blank should be "[tex]CO_{2}[/tex]"
19. the question seems to be answered.
20. [tex]CH_{3}[/tex]
which describes an attribute of nonrenewable resources
Answer:
atributes of nonrenewable recources are things you cant re use after 1 use like gas
Explanation:
Answer: the answer is b. Are unlimited
Explanation:
how much water will you need to add to your working solution to get to a 100 ml total volume of a 0.03m nacl solution?
Answer:
The solution is made by adding 4.38 g NaCl to a 250-mL volumetric flask. About 100 mL of water are added and when all the NaCl dissolves water is added up ...
An endothermic reaction occurs when water and ammonium nitrate are combined. Which of the following statements correctly
describes the energy changes in the reaction?
OA. Energy is released because the reactants have more chemical energy than the products.
OB. Energy is absorbed because the reactants have more chemical energy than the products,
OC. Energy is absorbed because the products have more chemical energy than the reactants.
OD. Energy is released because the products have more chemical energy than the reactants.
Answer:
C.Energy is absorbed because the products have more chemical energy than the reactants.
Explanation:
What has a larger mass, a mole of oxygen gas or a mole of neon gas?
Answer:
1 mole ozone gas
Explanation:
Since atomicity of Ozone (3) is maximum so, it will contain maximum number of atoms.
When the equation for the reaction represented below is balanced and all coefficients are reduced to lowest whole-number terms, the coefficient for Al(s) is __ Al(s) + __ O2(g) __ Al2O3(s)
This question is asking for the correct balanced reaction, when solid aluminum reacts with gaseous oxygen to form solid aluminum oxide, according to the law of conservation of mass, which demands us to have the same number of atoms of each element on both sides of the equation.
In such a way, we can start by knowing there is one aluminum atom on the left and two on the right whereas there are two oxygen atoms on the left and three on the right side of the equation.
The aforementioned means we must balance oxygen first by putting a 2 on aluminum oxide and a 3 on oxygen in order to cross multiply and obtain six oxygen atoms on both sides of the equation.
Moreover, the 2 on the aluminum oxide makes four aluminum atoms on the right, which means we must put a 4 on the left-handed aluminum in order to get the correct balance, and therefore, write the following balanced equation:
4Al(s) + 3O₂(g) ⇒ 2Al₂O₃(s)
Hence, the coefficient for Al, as asked, is 4.
Learn more:
https://brainly.com/question/11322377 https://brainly.com/question/71815482. Is the following sentence true or false? Most earthquakes generate
tsunamis.
Which of the following giant covalent structures does not have a high melting and boiling
point?
a) Polythene
b) Graphite
c) Silicon dioxide
d) Diamond
Answer:
Polythene has the lowest melting/boiling point from all the other covalent structures mentioned in this question.
Answer:
Polythene (polyethene according the IUPAC nomenclature.)
Explanation:
Consider the structure of each option:
Polythene: long chains of atoms that are able to rotate along the bonding axis. Graphite: layers of (hexagonal) carbon sheets; each individual sheet is rigid (allows no rotation.) Silicon dioxide: three-dimensional (tetrahedral) network of carbon and oxygen atoms; the entire network very rigid (allows no rotation.)Diamond: three-dimensional (tetrahedral) network of carbon atoms; likewise, the entire tetrahedral network is very rigid.Melting each structure requires overcoming the forces that hold the structure rigid:
In polythene, van der Waal forces hold the chains together and prevents rotations.Deshaping graphite requires bending the layers; doing so would require overcoming the covalent bonds within the hexagonal sheets.In silicon dioxide and diamond, deshaping the tetrahedral network also requires overcoming covalent bonds.Van der Waal forces are much easier to break than covalent bonds.
Hence, the melting point of polythene would be the lowest among the options.
Which of the following compounds has the general formula X3Y2?Which of the following compounds has the general formula X3Y2?
There are no above options to choose from so I am giving an example of a X3Y2 formula which is Magnesium nitride, the formula is Mg3N2.
15) The chemical formula of a compound indicates the
A) relative proportions of the elements in the compound
B) identity of the elements in the compound only
C) type and arrangement of the bonds in the compound
D) three-dimensional structure of the compound
Could someone help me with this?
Solving part-1 only
#1
KMnO_4
Transition metal is Manganese (Mn)#2
Actually it's the oxidation number of Mn
Let's find how?
[tex]\\ \tt\Rrightarrow x+1+4(-2)=0[/tex]
[tex]\\ \tt\Rrightarrow x+1-8=0[/tex]
[tex]\\ \tt\Rrightarrow x-7=0[/tex]
[tex]\\ \tt\Rrightarrow x=+7[/tex]
x is the oxidation number#3
Purple as per the color of potassium permanganate#4
[tex]\boxed{\begin{array}{c|c|c}\boxed{\bf Tube} &\boxed{\bf Charge} &\boxed{\bf No\:of\; electrons\: loss}\\ \sf 2 &\sf +6 &\sf 6e^-\\ \sf 3& \sf +2 &\sf 2e- \\ \sf 4 &\sf 4 &\sf 4e^-\end{array}}[/tex]
what is the oxidation number of oxygen in most compounds
Answer:
2-
Explanation:
Oxygen always act with an oxidation number of 2- unless we're talking of peroxide such as H2O2, where oxygen acts with an oxidation number of 1-
look at the picture
Answer:
The strong electric force.
Explanation:
Trust me. If its wrong, comment on this, don't delete it. If someone else answers with the wrong question than other students might get the answer wrong. So if its right, say that it is, if its wrong, tell others what the real answer is.
Helppp plzzzz!!!!!!1Asappppp
Answer:
0.178M
Explanation:
The question can immediately be understood as comparing two states.
- The initial state M1 , V1.
- The Final state M2 , V2.
M - Molarity.
V - Volume (in mili liters/ml/ in this case).
The formula is stated as:
M1 * V1 = M2 * V2
Given- Required
M1 = 0.125M V1 = 265ml M2 = ?
V2 = 186ml
Plug these values into the formula above and divide V2 to get M2.rearranged formula - M2 = M1 * V1 / V2 = 0.125M * 265ml / 186ml
= 0.178091397 M ~ ~ 0.178M.