beta-plus decay sodium protons and neutrons
Answer:
(β-decay) is a type of radioactive decay in which a beta particle (fast energetic electron or positron) is emitted from an atomic nucleus, transforming the original nuclide to an isobar of that nuclide. For example, beta decay of a neutron transforms it into a proton by the emission of an electron accompanied by an antineutrino; or, conversely a proton is converted into a neutron by the emission of a positron with a neutrino in so-called positron emission.
Explanation:
Answer:
Beta decay occurs when, in a nucleus with too many protons or too many neutrons, one of the protons or neutrons is transformed into the other. ... In beta plus decay, a proton decays into a neutron, a positron, and a neutrino: p Æ n + e+ +n.
Explanation:
2.(06.01 MC)
The graph compares the kinetic energies of the molecules in four gas samples. Each graph shows a normal distribution, so the average is the center.
Fraction of Molecules
Kinetic Energy
Which sample is likely to have the lowest temperature? (1 point)
Answer:
The gas A is likely to have the lowest temperature
Explanation:
In a gas, the kinetic energy is directly proportional to the temperature under constant pressure and volume.
As you can see in the problem, the average of A has a low kinetic energy. But the average is increasing between B, C and D.
As the gas A has the lowest average kinetic energy:
The gas A is likely to have the lowest temperature Write the electronic configuration of the following element or ion and circle on their valance electrons
A.27 Al =
13
B. 31p-3
15
please answer my question now ! I will give you a Brinalist
1s2,2s2,2p6
Explanation:
electron arrangements
do we need nuclear energy to stop climate change?
Answer:
Hey mate......
Explanation:
This is ur answer.....
To combat climate change, the world must rapidly reduce its dependency on fossil fuels to reduce greenhouse gas emissions. Nuclear energy is low-carbon and can be deployed on a large scale in the time frame required, supplying the world with clean and affordable electricity.
Hope it helps!
Brainliest pls!
Follow me! :)
Which is closer to the Sun—Neptune or the Earth?
O A.
The distance from the Earth to the Sun cannot be determined.
OB.
The Earth is closer to the Sun than Neptune is.
OC. They are the same distance from the Sun.
OD.
Neptune is closer to the Sun than the Earth is.
Answer: The earth is closer to the sun than neptune is
Explanation:
Answer:
The Earth is closer to the Sun than Neptune is.
Explanation:
pov
Which is more likely to melt a cup of ice - a spoonful of boiling water, or a cup of room-temperature
Answer:
boiling water
Explanation:
its hotter
What is the role of the producer in any food chain?
Question 1 options:
Producers turn light energy into food energy
Producers make the food that consumers eat
Without producers, consumers would starve
All of these answers are correct
Answer:
All of these answers are correct.
Explanation:
They are all correct because producers make their food(energy) through photosynthesis, they provide food to herbivores and therefore the rest of the food chain, and without them, the food chain would collapse and all the consumers would starve.
(C) The silver carp is another species native to Asia that was introduced to aquaculture operations and sewage treatment ponds in the Mississippi River valley to control excess algae
accumulation. The species escaped from these operations into the Mississippi River and its tributaries and has the potential to invade the Great Lakes. Scientists are concerned that this
species is having severe negative impacts on these areas.
() Propose a potential solution, other than physically removing the carp from the rivers, to manage the problem of the invasive silver carp in the United States.
Answer:
Introducing predator of silver carp or an invasive species that can feed upon silver carp
Explanation:
The solution is attached
why do solids not diffuse
Answer:
This is because of diffusion , the movement of particles from an area of high concentration to an area of low concentration. ... This means that diffusion does not happen in solids – the particles in a solid can only vibrate and cannot move from place to place.
Answer:
Solids cannot diffuse each other because they are tightly packed and they are rigid and do not have fluidity.
What is a decay series?
a series of reactions that never ends
a different form of chemical bonding
a chain of decays that results in a stable nucleus
a series of chemical reactions that ends with a decay\
HELPPPPPP
Answer:
a chain of decays that result in a stable nucleus
Explanation:
Decay series is a series of decay in which radioactive element is decomposed in different elements until it produces one stable atom.
Answer:
C
Explanation:
took test Edg
calculate the atomic mass of gallium if gallium has two naturally occurring isotopes with the following massess and natural abundances Ga-69 68.9256 amu 60.11% Ga-71 70.9247 amu 39.89
Answer: Atomic mass of gallium = 69.72304093 amu
Explanation:
We calculate the atomic mass of Gallium by using the Relative abundance of the isotopes.
Atomic mass =mass x Natural Abundance of Isotope 1 +mass x Natural Abundance of Isotope 2
(60.11/100 x 68.9256) + (39.89/100 x 70.9247)
= 41.43117816 + 28.29186283 = 69.72304093 amu
Two groups of students were given the same test. One group of students studied for 2 hours and the other group of students did not study at all. The group of students who studied achieved higher grades on the test. What is the DEPENDENT variable?
Answer:
Grade achieved is the dependent variable in the study.
Explanation:
A variable in any research or study is any property, characteristic, number, or a quantity which shows variability or change in its value i.e. it increases or decreases over time, depending on the treatment conditions.
There are two types of variables: Dependent variable and Independent variable.
An independent variable does not depent on any factor for its value or result, rather, a change units value brings about a change in the dependent variable.
A dependent variable is the variable which depends on some factor which the researcher controls. Any change made on the factor by the researcher would bring about a change on the dependent variable.
For example, in the given example above, studying habit affects academic performance. If a student studies more, his/her academic performance will improve as they will achieve higher grades. On the other hand, if a student fails to study, their academic performance will not show any improvement when compared to the group of students who studied. Thus, grade improvement depends on studying habit.
Therefore, grade obtained is the dependent variable in the study.
A 50,000 g septic tank reading reports that methane gas bubbles are present with a concentration of 17 ppm
Answer:
[tex]m_{solute}=0.85g[/tex]
Explanation:
Hello there!
In this case, according to the given information for the parts per million of methane in this solution, it is possible for us to first write the equation for this unit of concentration as shown below:
[tex]ppm=\frac{m_{solute}}{m_{solvent}} *1x10^6[/tex]
In such a way, since the septic tank has a mass of 50,000 g, the mass of methane into it is calculated as shown below:
[tex]m_{solute}=\frac{ppm*m_{solvent}}{1x10^6}[/tex]
Now, we plug in the numbers to obtain:
[tex]m_{solute}=\frac{17*50000g}{1x10^6}\\\\m_{solute}=0.85g[/tex]
Regards!
Which sequence of words is in order of being able to carry the MOST electric
current to the LEAST? *
Resistor, insulator, conductor
Insulator, conductor, resistor
Conductor, insulator, resistor
Conductor, resistor, insulator
Answer: The order of being able to carry the MOST electric
current to the LEAST is Conductor, resistor, insulator
Explanation:
Resistor is a device which partially prevents the flow of electric current through it.
Insulator is a device which completely prevents the flow of electric current through it.
Conductor is a device which allows the flow of electric current through it.
Thus the sequence of words in order of being able to carry the MOST electric
current to the LEAST is Conductor , Resistor , Insulator.
HELP ASAP
Explain the factors that affect the sounds we hear. Support your response with evidence and scientific reasoning including relationship between wave properties and sound characteristics you explored in this . In your response you should each of the following terms:
Loudness/Volume Pitch Frequency Amplitude
Answer:
The loudness of sound is determined, in turn, by the intensity, or amount of energy, in sound waves. The unit of intensity is the decibel (dB) Intensity of sound results from two factors: the amplitude of the sound waves and how far they have traveled from the source of the sound.
Explanation:
WHAT MEASURING EQUIPMENT DID LEANNE USE TO GET HER RESULTS
Answer:
Thietbi od
Explanation:
C2H, (g)+ 502 (g) 3C02(g) + 4H2O(g)
Define Acid and alkalis
Answer:
mark me brainliest
Explanation:
An acid is a substance that has a pH lower than 7. For example, hydrochloric acid, sulphuric acid, citric acid, ethanoic acid (vinegar). A base is a substance that neutralises an acid – those that dissolve in water are called alkalis. An alkali is a soluble substance with a pH higher than 7.
Answer:
The chemical which give hydrogen ion when dissolve in water is called acid.for example:HCL,HNO3,H2SO4 etc.
The bases that dissolve in water and produce hydroxyl ions are called alkalis.for example:NaOH,KOH etc.
Explanation:
Why is this conveyor important for Earth?
Answer:
.
Explanation:
Answer:
The great ocean conveyor plays a highly significant part in the climate of the planet. It transports heat to the Polar Regions, for example. In doing so, the amount of ice that can be formed in these regions is limited.
2Fe +3S= Fe2S3 how many grams of sulfur are involved in this reaction if 95 grams of iron are needed to react with sulfur
Answer:
83 g
Explanation:
Step 1: Write the balanced equation
2 Fe + 3 S ⇒ Fe₂S₃
Step 2: Calculate the moles corresponding to 95 g of Fe
The molar mass of Fe is 55.85 g/mol.
95 g × 1 mol/55.85 g = 1.7 mol
Step 3: Calculate the moles of S needed to react with 1.7 moles of Fe
The molar ratio of Fe to S is 2:3. The moles of S needed are 3/2 × 1.7 mol = 2.6 mol
Step 4: Calculate the mass corresponding to 2.6 moles of S
The molar mass of S is 32.07 g/mol.
2.6 mol × 32.07 g/mol = 83 g
what is the mass of a sample of sulfur with a volume of 5.0 cm3
Answer:
0.00714 g
Explanation:
We know that the volume of one mole of a substance is 22400 cm^3
Thus;
1 mole of sulphur occupies 22400 cm^3
x moles of sulphur occupies 5.0 cm3
x = 5.0 cm3 * 1 mole/22400 cm^3
x = 2.23 * 10^-4 moles
Molar mass of sulphur = 32 g/mol
Mass of sulphur = 2.23 * 10^-4 moles * 32 g/mol
Mass of sulphur = 0.00714 g
What are the two kinds of ways matter changes?
Balance the following chemical equation by providing the correct coefficients
Answer:
2FeBr₃ + 3Na₂S → 1Fe₂S₃ + 6NaBr
Explanation:
SOLUTION :-
Balance the equation by hit & trial method , and you'll get the answer :-
2FeBr₃ + 3Na₂S → 1Fe₂S₃ + 6NaBr
VERIFICATION :-
In the reactant side of the equation :-
Number of Fe atoms = 2×1 = 2Number of Br atoms = 2×3 = 6Number of Na atoms = 3×2 = 6Number of S atoms = 3×1 = 3In the product side of the equation :-
Number of Fe atoms = 1×2 = 2Number of S atoms = 1×3 = 3Number of Na atoms = 6×1 = 6Number of Br atoms = 6×1 = 6Number of atoms of all elements are same in both reactant & product side of the equation. Hence , the equation is balanced.
PLEASEEEE HELP :')
''If 5.6 mole of calcium metal is reacted, how many grams of calcium phosphide will form?'
Answer:
340 grams Ca₃P₂ (2 sig. figs.)
Explanation:
3Ca + 2P => Ca₃P₂
5.6 mole + excess => ? grams
Convert the 'known' to a coefficient of 1 by dividing all coefficients by 3.
=> Ca + 2/3P => 1/3Ca₃P₂
From the above, 1 mole of Ca => 1/3 mole Ca₃P₂
∴ 5.6 mole Ca in an excess of P => 1/3(5.6 mole) Ca₃P₂
=> 1.8666 mol Ca₃P₂ (calculator answer) ≅ 1.9 mol Ca₃P₂
=> 1.9 mole x 182 g Ca₃P₂/mol Ca₃P₂ = 339.73333 grams Ca₃P₂
≅ 340 grams Ca₃P₂ (2 sig. figs.)
1.00 mole of an ideal gas occupies a volume of 22.4 L at 0 C and 760 mmHg (STP). It is cooled to -41 C while the pressure is increased to 805 mmHg. What is the new volume of the gas in liters?
Answer:
[tex]V_2=18.0L[/tex]
Explanation:
Hello there!
In this case, according to the given information, we infer that we need the combined gas law in order to solve this problem:
[tex]\frac{P_2V_2}{T_2}} =\frac{P_1V_1}{T_1}}[/tex]
Thus, by suing the temperatures in Kelvins, we can solve for the final volume as shown below:
[tex]V_2 =\frac{P_1V_1T_2}{T_1P_2}}\\\\V_2 =\frac{(760mmHg)(22.4L)(232K)}{(273K)(805mmHg)} \\\\V_2=18.0L[/tex]
Regards!
Which statement best explains what causes the phase change from solid ice to liquid water?
Answer:
The melting point is the temperature at which a solid changes into a liquid. The melting point of a solid is the same as the freezing point of the liquid. At that temperature, the solid and liquid states of the substance are in equilibrium. For water, this equilibrium occurs at 0°C.
Explanation:
Answer: Heat or pressure causes the phase change from solid ice to liquid water.
Giving Bainliest!!!!!
In 2-3 sentences, describe the basic properties of waves including frequency, amplitude, wavelength, and speed.
Answer:
frequency: This is the number of oscillations in one second or number of complete wavelengths produced in one second.Amplitude: This is the maximum displacement of a particle from its mean position.Wavelength: This is the distance between one crest and another or one trough and another.Speed: This is the distance a wave travels in a given amount of time.What is the oil refining process?
Answer:
"the chemical engineering processes and other facilities used in petroleum refineries to transform crude oil into useful products such as liquefied petroleum gas, gasoline or petrol, kerosene, jet fuel, diesel oil and fuel oils"
-wikipedia
Explanation:
[tex]\huge{\textbf{\textsf{{\color{pink}{An}}{\red{sw}}{\orange{er}} {\color{yellow}{:}}}}}[/tex]
An oil refinery or petroleum refinery is an industrial process plant where crude oil is transformed and refined into useful products such as petroleum naphtha, gasoline, diesel fuel, asphalt base, heating oil, kerosene, liquefied petroleum gas, jet fuel and fuel oils.
Thanks Hope it helps.What mass of LiOH would need to be dissolved in water to make 300.0 mL of a solution with a pH of 11.33?
Execute Order 66________________
The mass of LiOH needed to make a 300 mL of a solution with a pH of 11.33 is 0.015 g
We'll begin by calculating the pOH of the solution.
pH = 11.33
pOH =?
pH + pOH = 14
11.33 + pOH = 14
Collect like terms
pOH = 14 – 11.33
pOH = 2.67 Next, we shall determine the concentration of hydroxide ion, OH⁻pOH = 2.67
Concentration of hydroxide ion [OH⁻] = ?pOH = –Log [OH⁻]
2.67 = –Log [OH⁻]
–2.67 = Log [OH⁻]
Take the as antilog of –2.67
[OH⁻] = antilog (–2.67)
[OH⁻] = 0.0021 MNext, we shall determine the concentration of LiOH.LiOH(aq) —> Li⁺(aq) + OH⁻(aq)
From the balanced equation above,
1 mole of LiOH contains 1 mole of OH⁻
Therefore,
0.0021 M LiOH will also contain 0.0021 M OH⁻.
Next, we shall determine the mole of LiOH in the solution.Molarity of LiOH = 0.0021 M
Volume = 300 mL = 300 / 1000 = 0.3 L
Mole of LiOH =?Mole = Molarity × volume
Mole of LiOH = 0.0021 × 0.3
Mole of LiOH = 0.00063 moleFinally, we shall determine the mass of LiOH needed to prepare the solution.Mole of LiOH = 0.00063 mole
Molar mass of LiOH = 7 + 16 + 1 = 24 g/mol
Mass of LiOH = ?Mass = mole × molar mass
Mass of LiOH = 0.00063 × 24
Mass of LiOH = 0.015 gTherefore, the mass of LiOH needed to prepare the solution is 0.015 g
Learn more: https://brainly.com/question/5851093
What volume of solution would be needed to deliver 3.0 mg of a drug if the concentration of the drug in the solution was 3.5% (m/v)?
Show work please
Answer:
The correct answer is "85.71 mg".
Explanation:
The given values are:
Mass of drug,
= 3.0 mg
Mass percentage,
= 3.5%
As we know,
⇒ [tex]Mass \ percent = \frac{Mass \ of \ drug}{Mass \ of \ solution}\times 100[/tex]
Or,
⇒ [tex]Mass \ of \ solution = \frac{Mass \ of \ drug}{Mass \ percent}\times 100[/tex]
On substituting the values, we get
⇒ [tex]=\frac{3.0}{3.5}\times 100[/tex]
⇒ [tex]=0.8571\times 100[/tex]
⇒ [tex]=85.71 \ mg[/tex]