Answer:
When the waves reflected from the inner and outer surface combine they will interfere with each other, removing or reinforcing some parts of white light by destructive or constructive interference. ... This results in color.
Explanation:
this is what we studied
so basically there is like a surface
and 2 different waves coming out of the same source
they will combine and start removing parts of the white light (which originally consists of 6 to 7 colors)
results in showing these colors
Two identical spheres (of equal mass) a distance of 10 meters apart exert a force of gravity of 0.00050 N on each other. What are their masses?
Answer:
The gravitational force between two objects is written as:
F = G*m1*m2/r^2
Where:
G = 6.67*10^(-11) m^3/kg*s
m1 and m2 are the masses of the objects.
r is the distance between the objects.
In this case, we know that:
F = 0.0005 N
r = 10m
and because the two spheres are identical, we have that:
m1 = m2 = M
then we have the equation:
0.0005 N = (6.67*10^(-11) m^3/kg*s)*(M^2/(10m)^2)
0.0005 N*(10m)^2/(6.67*10^(-11) m^3/kg*s) = M^2
√( 0.0005 N*(10m)^2/(6.67*10^(-11) m^3/kg*s) ) = M = 27,379.3 kg
The mass of each sphere is 27,379.3 kg
Phich instrument can be used to give a direct measurement of the mass of a rock on moon
Answer:
you can use a balance
Explanation:
when you tend to measure something you are using your brain so why dont you use your brain dimwitt
The input work done on a machine is 9.63 × 103 joules, and the output work is 3.0 × 103 joules. What is the percentage efficiency of the machine?
Answer:
31.15%
Explanation:
The formula used was
((Work output)/(Work input))×100
Answer:
C. 31.1 percent
Put them in order to smallest to largest: centimeter, femtometer, kilometer, light year, meter, nanometer
The block in the drawing has dimensions L0×2L0×3L0,where L0 =0.5 m. The block has a thermal conductivity of 300 J/(s·m·C˚). In drawings A, B, and C, heat is conducted through the block in three different directions; in each case the temperature of the warmer surface is 37 ˚C and that of the cooler surface is 8 ˚C Determine the heat that flows in 3 s for each case.
The drawing showing the block is missing, so i have attached it.
Answer:
Q_p = 19575 J
Q_o = 8700 J
Q_g = 78300 J
Explanation:
We are given L0 = 0.5 m
From the image, we can see that;
Length; L = 3L0 = 3 × 0.5 = 1.5 m
Width; W = L0 = 0.5 m
Height; H = 2L0 = 2 × 0.5 = 1 m
Temperature of warmer surface; T_h = 37 ˚C
Temperature of cooler surface; T_l = 8 ˚C
thermal conductivity; k = 300 J/(s·m·C˚)
Time for which the heat flows; t = 3 s
Now, from Fourier's law of conduction, the rate of heat flow is given by;
Q/t = kA(dT/dx)
Where;
A is area
dt is change in temperature = 37 - 8 = 29°C
dx is perpendicular distance
Now, for the amount heat flow perpendicular to the pink surface, from the image dx will be the height 1 m.
Thus;
Q_p/3 = 300 × (1.5 × 0.5) × (29/1)
Q_p/3 = 6525
Q_p = 3 × 6525
Q_p = 19575 J
for the amount heat flow perpendicular to the orange surface, from the image dx will be the length 1.5 m.
Thus;
Q_o/3 = 300 × (1 × 0.5) × (29/1.5)
Q_o/3 = 2900
Q_o = 2900 × 3
Q_o = 8700 J
for the amount heat flow perpendicular to the green surface, from the image dx will be the width 0.5 m.
Thus;
Q_g/3 = 300 × (1 × 1.5) × (29/0.5)
Q_g/3 = 26100
Q_g = 26100 × 3
Q_g = 78300 J
i need help this is due to day!! i will give brainliest
Answer:
One arm row: Latissmus Dorsi (Lat)
Dumbell flys: Shoulders
Machine back press: pectorals
Push downs: Triceps
Explanation:
gsjsjsjjshsjds
Why is it hard to respond with action at times?
4. A car, initially traveling east with a speed of
5.0 m/s, is accelerated uniformly at 2.0 m/s2 east for
10 s along a straight line. During this 10 s
interval the car travels a total distance of
A. 50 m
B. 60 m
C. 100 m
✓ D. 150 m
Answer:
150 m
Explanation:
Given,
u=5m/s
a=2m/s2
t=10s
v=?
s=?
Now,
v=u+at
=5+2×10
=5+20
=25m/s
So,
s=u+v/2×t
=5+25/2×10
=30/2×10
=15×10
=150m
can anyone help me with this
Answer:
earth is 4.54 billion years old
for an organism to survive they would have to change ( mutate )
A mutation is any permenant change in dna of a gene or chromosome
some mutations are bad and some can be good
Explanation:
Please explain the different ways offense can score and how many points each way is worth? Answer in complete sentences.
Answer:
what sport bruh
Explanation:
Answer:
in wat sport exactly
Explanation:
in eat sport
PLEASE HELP 100 POINTS!!!!!
Study this image of the process of photosynthesis. What’s wrong with the image?
A. Sun rays are shown on the right side of the image.
B. Carbon dioxide is shown as an input.
C. Oxygen is shown as an input.
D. Water is shown as an input.
Answer:
C
Explanation:
Carbon dioxide should be the input, and oxygen should be the output.
Answer:
c
Explanation:
i got it right :D
What is the pigment in the leaves called?
1.Chloroplasts
2.Green
3.Stroma
4.Chlorophyll
Answer: D: Chloroplasts
Explanation:
Answer: d
Explanation:
I have been trying to do number 2 and I just don’t know what the answer is if you can help me thank you so mush
Answer:
Strong Positive Linear Line Correlation
Explanation:
According to the diagram, there is a strong positive linear line correlation between velocity and distance of galaxies. Hubble showed that galaxies are receding away from people with a velocity that is proportional to their distance from people more distant galaxies recede faster than nearby galaxies.
About the diagram: Velocity is the distance relation among extra-galactic nebulae. Radial velocities is corrected for solar motion, are plotted against distances estimated from involved stars and mean luminosities of nebulae in a cluster. The black discs and full line represent the solution for solar motion by using the nebulae individually; the circles and broken line represent the solution combining the nebulae into groups; the cross represents the mean velocity corresponding to the mean distance of 22 nebulae whose distances could not be estimated individually.
what is the process of subduction
Answer:
Subduction is a geological process that takes place at convergent boundaries of tectonic plates where one plate moves under another and is forced to sink due to high gravitational potential energy into the mantle. Regions where this process occurs are known as subduction zones.
A rock is thrown horizontally from a building at 15 m/s. It hits the ground 45 m from the base of the building. How high was the building?
Answer:
Explanation:
hope this helps!
A spacecraft orbiting Earth is both moving forward and
a. at terminal velocity
b. experiencing resistance
c. weightless
d. towards earth
Answer: (A) At terminal velocity ...
Explanation:
A map of earthquakes and volcanoes on Earth shows that they do not occur in evenly distributed areas, but they also do not occur randomly over Earth's surface. Describe what GPS measurements show about the distribution of locations where earthquakes and volcanoes occur.
A bus approaches red traffic light, and slows down from a speed of 15
m/s to rest in 3 seconds. What is the average acceleration (in m/s)?
Answer:
-5
Explanation:
-15/3
Which object is most efficient?
a. A heat engine that produces 30 J of work for 60 J of input energy.
b. A heat engine that produces 15 J of work for 30 J of input energy.
c. A heat engine that produces 20 J of work for 60 J of input energy.
d. A heat engine that produces 40 J of work for 50 J of input energy.
Answer:
It is b
Explanation:
Bicycle A with mass 40 Kg is traveling with a velocity of 4 m/s and Bicycle B with mass 20 Kg is traveling with a velocity of 2m/s. The two bicycles have kinetic energy
Calculate it and state which bicycle has higher energy and why?
Answer:
bicycle A has a greater K.E.
Explanation:
K.E = 1/2mv²
bicycle A = 1/2 × 40 × 4² = 320J
bicycle B = 1/2 × 20 × 2² = 100J
bicycle A has a greater K.E. because it has bigger mass and moves with faster velocity
How long does it take for light to travel 1m? and a 1mm?
Answer:
Hi. U should do like this
Answer:
3.335641 nanoseconds for meters
3. What are the forces present on the rope?
Answer:
The pulling force that acts along a stretched flexible connector, such as a rope or cable, is called tension, T. When a rope supports the weight of an object that is at rest, the tension in the rope is equal to the weight of the object: T = mg.
Which of the following is strenuous?
Atraining for an athletic competition
Bsharing a candy bar with a friend
Creading an exciting mystery
Dforgetting to complete your homework
Answer:
I think it c
Explanation:
Answer:
Atraining for an athletic competition