In the book "The 100 Cupboards" by N.D. Wilson, the person who comes to look for Henry and faces Frank in Grandfather's bedroom is d. Eli FitzFaeren option(D) .
Eli FitzFaeren is a character introduced in the series as an experienced traveler between worlds. He possesses a magical compass that allows him to navigate through the different cupboards and their portals.
Eli FitzFaeren's arrival in Grandfather's bedroom brings a new level of mystery and intrigue to the story. He is aware of the existence of the cupboards and their powers, and his appearance signifies that Henry and Frank are not the only ones who know about this hidden world.
Eli FitzFaeren's presence adds depth to the narrative as he becomes a mentor figure for Henry, guiding him in understanding the secrets and dangers associated with the cupboards. He possesses knowledge that Henry and Frank do not yet possess, and his arrival propels the story forward, leading the characters on a journey of discovery and adventure.
Overall, Eli FitzFaeren's entrance into Grandfather's bedroom marks a turning point in the story, introducing a new character with significant knowledge of the cupboards and their significance in the larger narrative.
For more questions on compass, click on:
https://brainly.com/question/924374
#SPJ8
boundary layer forms over a flat surface. At a location sufficiently far downstream, the boundary layer will transition from laminar to turbulent. At this location, the shear stresses on the flat surface will.. Increase decrease 5
The shear stresses on the flat surface will increase when the boundary layer transitions from laminar to turbulent at a location sufficiently far downstream.
What is a boundary layer?The boundary layer refers to the flow region that is present in the immediate vicinity of the surface of an object when an object moves through a fluid. The boundary layer consists of thin layers of fluid that form near the object's surface. The boundary layer is separated into two types: laminar and turbulent.
Laminar boundary layer: This type of boundary layer is smooth and orderly, with fluid flowing parallel to the surface.
Turbulent boundary layer: This type of boundary layer is irregular and chaotic, with fluid flowing in a random manner. A flat surface's boundary layer will transition from laminar to turbulent at a location sufficiently far downstream. At this location, the shear stresses on the flat surface will increase.
Learn more about boundary layer Here.
https://brainly.com/question/31420938
#SPJ11
When the measured elevation of Point A is 255.48 ft and the error of closure is -0.05 ft, determined the corrected elevation of Point A when the cumulative distance to Point A is 1012.45 ft and the total loop distance is 1250.97 ft. a) 255.45 ft Ob) 255.44 ft c) None of the given answers d) 255.51 ft e) 255.52 ft
The corrected elevation of Point A is 255.45 ft (option a).
To determine the corrected elevation of Point A, we need to account for the error of closure and adjust the measured elevation. The corrected elevation can be calculated using the formula:
Corrected Elevation = Measured Elevation + (Error of Closure * (Cumulative Distance to Point A / Total Loop Distance))
Given that the measured elevation of Point A is 255.48 ft, the error of closure is -0.05 ft, the cumulative distance to Point A is 1012.45 ft, and the total loop distance is 1250.97 ft, we can substitute these values into the formula:
Corrected Elevation = 255.48 + (-0.05 * (1012.45 / 1250.97))
Calculating the expression, we get:
Corrected Elevation = 255.48 + (-0.05 * 0.809)
Corrected Elevation = 255.48 - 0.04045
Corrected Elevation = 255.43955
Rounding the value to two decimal places, the corrected elevation of Point A is 255.45 ft. Therefore, the correct answer is option a) 255.45 ft.
Learn more about Error here: https://brainly.com/question/30759250
#SPJ11
Design a column with an effective length of 22 ft to
support a dead load of 65 klb, a live load of 110 klb, and a wind
load of 144 klb. Select the lightest W14 made of steel.
Jack C. McCormac book pro
The lightest W14 steel column would be suitable to support the given loads of 65 klb dead load, 110 klb live load, and 144 klb wind load for an effective length of 22 ft.
To determine the lightest W14 steel column that can support the given loads, we need to consider the column's capacity based on the axial load and buckling strength. Using the design provisions outlined in Jack C. McCormac's book, we can calculate the required section modulus and moment of inertia for the column based on the applied loads and effective length. Then, we can refer to steel section tables to find the lightest W14 shape that satisfies these requirements.
The selection of the W14 shape will depend on its properties, such as weight per foot and moment of inertia. By comparing different available W14 shapes, considering their weights and meeting the calculated requirements, the lightest W14 section that satisfies the load conditions can be determined. It's important to note that specific steel section tables or design codes should be consulted for accurate calculations and section selection, as they may vary depending on the country and design standards being used.
Learn more about inertia here: https://brainly.com/question/29259718
#SPJ11
Identify the processing required for each of the waste types. This must include C&I, C&D and the segregated wastes within MSW. Q.2 Design a processing center. Q.3 Identify the resources that can be recovered annually.
Q.1: Processing Required for Each Waste Type:
C&I Waste (Commercial and Industrial Waste):
Sorting and Segregation: Separate recyclable materials from non-recyclable waste.
Recycling: Process recyclable materials into new products.
Waste-to-Energy: Convert non-recyclable waste into energy through incineration or gasification.
C&D Waste (Construction and Demolition Waste):
Sorting and Segregation: Separate recyclable materials like concrete, wood, metals, and bricks from mixed waste.
Recycling: Process recyclable materials into new construction products.
Landfilling: Dispose of non-recyclable waste in a landfill, minimizing it as much as possible.
Segregated Wastes within MSW (Municipal Solid Waste):
Organic Waste: Composting or anaerobic digestion to produce compost or biogas.
Paper and Cardboard: Recycling through sorting, pulping, and reprocessing.
Plastics: Sorting, cleaning, and reprocessing into recycled plastic materials.
Glass: Sorting, crushing, and melting to create new glass products.
Metals: Sorting, melting, and processing into new metal products.
Q.2: Designing a Processing Center:
A processing center could include:
Material Recovery Facility (MRF) for sorting and recovering recyclable materials.
Composting facility for processing organic waste into compost.
Recycling facilities for specific materials (paper, plastics, glass, metals).
Anaerobic digestion plant for converting organic waste into biogas.
Waste-to-Energy plant for generating energy from non-recyclable waste.
Landfill area for disposing of non-recyclable and non-recoverable waste.
Q.3: Resources Recovered Annually:
The resources that can be recovered annually depend on the waste management infrastructure. Potential resources include:
Recyclable Materials: Paper, plastics, glass, metals, etc., recovered and processed into new products.
Compost: Organic waste converted into nutrient-rich compost for soil enhancement.
Biogas: Produced from anaerobic digestion of organic waste, used for energy generation.
Energy: Waste-to-Energy plants convert non-recyclable waste into electricity or heat.
Landfill Gas: Methane gas captured from landfills for energy production.
Learm more about Segregation here
brainly.com/question/14330237
#SPJ11
write an introductory paragraph essay for similarities and
differences (compare and contrast) between municipal and biomedical
waste management in India.
Municipal waste management and biomedical waste management in India share similarities and differences in terms of their processes, regulations, and challenges.
Municipal waste management and biomedical waste management are both critical aspects of maintaining a clean and healthy environment in India. Similarities between the two include the need for proper collection, transportation, treatment, and disposal methods to prevent environmental pollution and public health risks.
Both types of waste management also require adherence to specific regulations and guidelines set by the government to ensure safe and effective practices. However, there are notable differences as well. Biomedical waste management involves handling hazardous waste materials generated from healthcare facilities, such as hospitals and clinics, which require specialized treatment and disposal methods to minimize the risk of infections and contamination.
Municipal waste management, on the other hand, deals with general waste generated by households, commercial establishments, and public spaces, focusing on waste reduction, segregation, recycling, and proper landfill management.
Challenges faced in municipal waste management include the sheer volume of waste generated, inadequate infrastructure, and limited public awareness, whereas biomedical waste management faces challenges related to segregation, proper storage, and training of healthcare personnel.
Learn more about: Biomedical waste
brainly.com/question/32318495
#SPJ11
1. What was the reaction of most Americans to the outbreak of World War I in Europe?
A, The U.S. sought to develop stronger ties with Germany
B. There was very little reaction in the U.S.
C. To ensure that the United States would not become involved
D. There was an overwhelming push to declare war on Germany
2. What was President Wilson trying to accomplish with the Fourteen Points?
Was he successful? Explain.
3. The United States never ratified The Versailles Treaty because
A. The House of Representatives was opposed to it
B. The Senate believed the war should continue
C. The Senate supported U.S. membership in the League of Nations
D. Republican leaders opposed provisions related to the League of Nations
4.Which action kept the United States from joining the League of Nations?
A. Veto by President Wilson
B. opposition in the Senate
C. Massive public protests
D. Continued revisions of the treaty
5. In World War I, African Americans were primarily
A. subjected to little discrimination at home
B. refusing to participate in the war effort
C. participating in non-violent protest
D. treated with respect in Europe
6. Wilson's main objective at Versailles was to
A. Punish Germany for having started the war
B. Secure peace in the western hemisphere
C. Prevent future wars through the establishment of an international organization
D. Reconstruct war-torn Europe
1. Most Americans reacted to the outbreak of World War I in Europe by seeking to ensure that the United States would not become involved.
2. President Wilson's main objective with the Fourteen Points was to secure peace and prevent future wars through the establishment of an international organization. Whether he was successful is a matter of debate and interpretation.
3. The United States never ratified the Versailles Treaty because Republican leaders opposed provisions related to the League of Nations.
1. The outbreak of World War I in Europe triggered a cautious response from most Americans. The United States had a policy of neutrality and sought to avoid entanglement in the conflict. There was a sentiment among the majority of Americans to ensure that the United States would not become involved in the war. This was fueled by a desire to avoid the devastating impact of the war and its consequences.
2. President Wilson's Fourteen Points were a set of principles outlined to guide the post-war peace negotiations and promote lasting peace. The objectives of the Fourteen Points included self-determination for nations, reduction of armaments, open diplomacy, and the establishment of the League of Nations. While Wilson's vision for a more just and stable world order resonated with many, the ultimate success of the Fourteen Points is debated. Some argue that they laid the groundwork for future peace efforts and influenced the creation of international institutions. Others point to the limitations and compromises made during the peace negotiations, particularly with the signing of the Versailles Treaty, which led to unresolved tensions and contributed to future conflicts.
3. The United States did not ratify the Versailles Treaty primarily because Republican leaders opposed provisions related to the League of Nations. Many Republicans were skeptical of the League's potential impact on U.S. sovereignty and believed it could lead to entanglement in future conflicts. Additionally, there were concerns about the treaty's perceived harsh treatment of Germany and its potential economic consequences for the United States. As a result, the U.S. Senate rejected the treaty, and the United States never officially joined the League of Nations.
Learn more about World War I
brainly.com/question/2864054
#SPJ11
Read the following passage:
I knew how to act and the right things to say, but I felt like a phony. I really cared about Lilly and I wanted her parents to like me, but this world was so different from mine. I wasn't comfortable in these clothes or around their friends. I felt like they could see right through me - like they knew where I came from and who my parents were. I decided to reveal my insecurities to Lilly, and she quickly put my mind at ease. She explained how much her family admired me and wanted to me to be a part of them.
Which statement describes the aesthetic impact the author most likely intends the resolution to have on the reader?
A. The author wants readers to gain a sense of relief and satisfaction.
B. The author wants readers to consider the purpose of family conflicts.
C. The author wants readers to feel disappointment and sadness.
D. The author wants readers to question the reliability of the narrator.
The statement that describes the aesthetic impact the author most likely intends the resolution to have on the reader is "The author wants readers to gain a sense of relief and satisfaction. Option A is the correct answer.
In the given passage, the narrator feels like a phony and has insecurities regarding her dress and friends circle in the new world. However, when she decides to reveal her insecurities to Lilly, her friend puts her mind at ease and explains how much her family admired her. This revelation gives a sense of relief and satisfaction to the narrator. The passage focuses on the resolution of the conflict in the narrator's mind, which is resolved through Lilly's reassurance.
The author intends the readers to feel relieved and satisfied about the narrator's insecurities being resolved. Thus, option A is correct. The passage does not mention any family conflicts; thus, option B is incorrect. The passage does not evoke disappointment or sadness; thus, option C is incorrect. Finally, the passage does not present any doubts regarding the reliability of the narrator.
For more questions on narrator
https://brainly.com/question/1150203
#SPJ8
This is an excerpt from- Sexual selection and special design authored by Steven W Gangestad, in the Annals New York academy of Science. Answer the questions based on the excerpt provided below. "…..Women claim men’s scent importantly affects their attraction to them. Moreover, evidence suggests that women’s olfaction changes across menstrual cycle. For instance, women tend to rate androstenone, a steroid found in men’s sweat, more positively near ovulation than during non-fertile phases.
In an initial study, we asked 41 men to wear T-shirt for two consecutive nights. During the two-day period, they were to wash only with unscented soap, not to wear any fragrances or colognes, not eat certain strong foods, and not to sleep with another person. They dropped shirts off at our lab on a designated morning. Later that same morning and throughout the next day, women came in, smelled each T-shirt and rated its attractiveness (a composite of two ratings: pleasantness and sexiness). For each woman, we regressed her rating on men’s symmetry to yield "a preference for symmetry" score (the regression slope, a measure of the change in rating as a function of a change in symmetry). We then examined the correlation of these preference scores with women’s estimated fertility based on their self-reported day of the cycle and actuarial data on probability of conception for each day. Across 28 normally ovulating women the correlation was 0.54, p<0.001. Examination of the bivariate plot revealed that when women’s fertility was near zero (very early and late in the cycle), they had no systematic preference for the scent of either symmetrical or asymmetrical men. As their fertility increased, however, they increasingly preferred the scent of symmetrical men.
A subsequent study replicated and extended that result in a larger sample of about 50 normally ovulating women and 80 men. Women’s preference for symmetry correlated 0.42 with their fertility based on the day of their cycle, p<0.001. We asked men how many times they showered and whether they wore any fragrances. The number of times men showered predicted the attractiveness of their scent. When this variable was partialled out and all men who wore fragrances were eliminated from the analysis, the correlation between women’s symmetry and their fertility actually increased, r=0.48, p<0.001. In a third study in our lab, this result was once again replicated, r=0.26, p<0.05. When data from all three studies were pooled, the correlation between women’s preference for symmetry and the fertile phase of their cycle was r=0.40, p<0.0001." [Note: p values reported here means that correlation r is statistically significant]
From this scenario, the immune systems of humans should be exceptionally high. Yet, there is a rising incidence of autoimmune diseases and lack thereof immunity. What form of selection do you think is at play here? Explain.
Autoimmune diseases are rising despite the fact that humans should have exceptionally high immune systems. This can be explained by the fact that sexual selection is at play, leading to a reduction in immune function.
The excerpt explains the correlation between women's preference for symmetry and their fertile phase of their cycle. It is observed that women tend to prefer the scent of symmetrical men as their fertility increases. This indicates that women use scent as a factor in determining mating partners, which is an example of sexual selection.Sexual selection is a special type of natural selection in which individuals with certain traits are more likely than others to obtain mates.
This leads to traits that improve an individual's ability to secure a mate being favored, while traits that do not aid in mate selection are not favored.As a result, it is suggested that sexual selection may have favored traits that lower immune function in order to signal traits related to mate quality. This could explain the rising incidence of autoimmune diseases despite the fact that humans should have exceptionally high immune systems.
To know more about Autoimmune diseases visit:
https://brainly.com/question/14766876
#SPJ11
In traffic engineering, define space mean speed, time mean
speed, and journey speed.
Space mean speed ( ¯ vs) is defined as the harmonic mean of speeds passing a point during a period of time. It also equals the average speeds over a length of roadway.
It includes the study of traffic flow, traffic signals, pedestrian crossings, and other related areas. Space mean speed, time mean speed, and journey speed are three important concepts in traffic engineering. Space mean speed refers to the average speed of all the vehicles that pass a point in a given period of time. This is often used to determine the level of congestion on a road or highway. It is calculated by dividing the total distance traveled by all vehicles by the total time taken by all vehicles.
To know more about distance refer :
https://brainly.com/question/1851893
#SPJ11
Written communication is very important in the business world, and the best way to hone one’s written business communication skills is by practicing. This assignment gives students the opportunity to show their written communication skills in the creation of an informal, analytical report style business document while also showing that they are able to analyze and evaluate business communication issues and recommend solutions. This assessment will be used to assess student learning of SLO4: At least 70% of students will be able to identify cultural, social, and ethical issues that impact business communication at least 70% of the time. Instructions: For this assignment you will create an informal, analytical report that 1. discusses at least 5 examples of how cultural, ethical, or social issues have impacted business communication in the past and 2. includes suggestions for how each of the 5 examples could be fixed or overcome. Your examples can come from a variety of sources including news articles, personal experience, experience of friends/family members, or examples included in textbooks (for this or other classes). Within the report you need to provide an analysis of the situation that discusses what happened and why it happened as well as your suggestion for how to keep the issue from happening again. If your example is from a text or the Internet make sure to include a link to the source or include it in an appropriately formatted References page
In the business world, written communication is crucial, and the best way to improve one's written business communication skills is by practice. This assignment provides students with the opportunity to display their written communication skills in the creation of an informal, analytical report style business document while also showing that they can examine and assess business communication problems and offer solutions.
The goal of this evaluation is to assess student learning of SLO4: At least 70% of students can recognize cultural, social, and ethical issues that impact business communication at least 70% of the time. The report should include a discussion of at least five cases where cultural, ethical, or social issues have influenced business communication in the past, as well as suggestions for how each of the five examples can be repaired or overcome. The examples can come from various sources, including news articles, personal experiences, experiences of friends or family members, or examples from textbooks (for this or other classes).
Within the report, an analysis of the situation should be included, discussing what happened and why it happened, as well as suggestions for how to prevent the problem from recurring. If the example is from a text or the Internet, be sure to include a link to the source or include it in a properly formatted References page.The following are the examples of how cultural, ethical, or social issues have impacted business communication in the past:Ethical Issues: A lack of ethics and values in the workplace has been a serious issue for businesses. Ethical issues arise when companies focus solely on profits and disregard the well-being of their employees, customers, or suppliers.
Businesses may deal with these concerns by adopting a more ethical approach, providing ethics training to their employees, and establishing an ethics hotline for reporting misconduct. Cultural Issues: Businesses can experience cultural problems when they operate in different countries. Employees may be unfamiliar with the culture, customs, and language of the nation in which they are working, which may lead to misunderstandings and poor communication.
Companies should provide language and cultural instruction to their employees, or partner with a local organization to provide assistance. Social Issues: Social problems can arise in the workplace when employees engage in inappropriate behavior. Examples of this may include sexual harassment, bullying, or other kinds of discriminatory conduct. The company should develop a strict code of conduct and provide training on appropriate workplace behavior to deal with these problems.
For more such questions on communication, click on:
https://brainly.com/question/28153246
#SPJ8
The continuous flow in a horizontal, frictionless rectangular open channel is subcritical. A smooth step-up bed is built downstream on the channel floor. As the height of the step-up bed is increased, choked condition is attained. With further increase in the height of the step-up bed, the water surface over the step-up bed will decrease to the extent that it will be above the critical depth. flow will stop. upstream will increase to the extent that it will create supercritical flow over the step-up bed. over the step-up bed will decrease to the extent that it will be below the critical depth.
With further increase in the height of the step-up bed in a subcritical flow, the water surface over the step-up bed will decrease to the extent that it will be below the critical depth.
This will cause the flow to transition from subcritical to supercritical over the step-up bed. The upstream water level will increase to the extent that it will create supercritical flow over the step-up bed, leading to increased velocities and changes in flow behavior.
Learn more about transition here:
https://brainly.com/question/18089035
#SPJ11
Study the influence of k and EI on the track responses such as rail deflection, bending moment and rail seat load for a two-axel bogie, wheel base distance 2,0 m, for the same axle load Q i. Study the effect of increasing the track modulus (k) on bending moment, rail deflection and rail seat load for the two axle load. (k, 2k, 4k, etc) ii. Study the effect of increasing the rail bending stiffness (EI) on bending moment, rail deflection and rail seat load for the two axle load. (EI, 2EI, 4EI).
The rail deflection, bending moment, and rail seat load are influenced by the track responses. The effect is as: Bending moment reduces. Rail deflection is reduced. Rail seat load reduces.
To study the effect of k and EI on the track responses, such as rail deflection, bending moment, and rail seat load for a two-axle bogie, we use the following information. The wheelbase distance is 2.0 m, and the same axle load is Qi. Effect of increasing the track modulus (k) on bending moment, rail deflection and rail seat load for the two axle load
When we increase the track modulus (k), bending moment and rail deflection decrease. Rail seat load increases when track modulus (k) is increased. Thus, when track modulus (k) is increased to 2k, 4k, and so on, the effect is as follows:Bending moment reduces. Rail deflection is reduced. Rail seat load increases. Effect of increasing the rail bending stiffness (EI) on bending moment, rail deflection and rail seat load for the two axle load
The rail deflection, bending moment, and rail seat load are influenced by an increase in the rail bending stiffness (EI). When the rail bending stiffness (EI) is increased, the bending moment reduces and the rail deflection reduces. When the rail bending stiffness (EI) is increased to 2EI, 4EI, and so on, the effect is as follows: Bending moment reduces. Rail deflection is reduced. Rail seat load reduces.
More on track responses: https://brainly.com/question/28234834
#SPJ11
Flow occurs over a spillway of constant section where depth of flow in the upstream is (1000+ x) mm, and depth of flow in the downstream is (50+x) mm, where x is the last two digits of your student ID. Calculate the resultant horizontal force (in Newton) on the spillway if the width of the spillway is 102 meter. Assume there is no head loss. Scan your A4 pages of solution and upload the scanned pages in vUWS as a single pdf file. Do not email it to the Lecturer/Tutor
Given data:Depth of flow in the upstream = (1000 + x) mmDepth of flow in the downstream = (50 + x) mmWidth of the spillway = 102 mFrictional head loss = 0 (Assuming)Here, x is the last two digits of the student ID.To determine the horizontal force (in Newton) on the spillway, use the following formula:Force (F) = γ × A × h_c × (C_d + C_o)
Where,γ = Specific weight of water = 9.81 kN/m³A = Cross-sectional area of the flowh_c = Distance of the centroid of the flow from the bottom of the spillway.C_d = Coefficient of dischargeC_o = Coefficient of contractionHere,As the given section is a constant section, the area of flow in the upstream and downstream will be equal.The cross-sectional area of flow = A = (1000 + x) × b and (50 + x) × b = (1000 + x) b = (50 + x) b∴ (1000 + x) b = (50 + x) b∴ b = 1.92 mSince the width of the spillway is 102 m, the length of the flow = 102 m.
Distance of the centroid of the flow from the bottom of the spillway = h_c = ((1000 + x) + (50 + x))/2 - 50= 475 + x/2 mmTo convert mm into meter, divide by 1000∴ h_c = (475 + x/2)/1000 mNow, substituting the given values in the above equation, we get: Force (F) = γ × A × h_c × (C_d + C_o)= 9.81 × 1.92 × (475 + x/2)/1000 × (1 + 0.6)= 14.40 × (475 + x/2) = 6840 + 7.2x N [Approximately]Therefore, the horizontal force (in Newton) on the spillway is 6840 + 7.2x N (Approximately).
To know more about upstream visit:-
https://brainly.com/question/30845324
#SPJ11
A N 450 E back tangent line intersects a S 850E forward tangent line at point "PI." The BC and the EC are located at stations 25+00, and 31+00. respectively. a) What is the stationing of the PI? (10 pts) b) What is the deflection angle to station 26+00? (10 pts) c) What is the chord distance to station 26+00 from BC? (10 pts) d) What is the bearing from BC to Radius Point? (10 pts) e) What is the bearing of the long chord from BC to EC? (10 pts) 2- A N 450 * E back tangent line intersects a S 850 * E forward tangent line at point "PI." The BC and the EC are located at stations 25+00, and 31+00. respectively. a) What is the stationing of the PI? (10 pts) b) What is the deflection angle to station 26+00? (10 pts) c) What is the chord distance to station 26+00 from BC? (10 pts) d) What is the bearing from BC to Radius Point? (10 pts) e) What is the bearing of the long chord from BC to EC?
Given the intersection of a N 450 E back tangent line and a S 850 E forward tangent line at point "PI," and the locations of BC and EC at stations 25+00 and 31+00, respectively, we can determine various measurements. The stationing of point PI, the deflection angle to station 26+00, the chord distance to station 26+00 from BC, the bearing from BC to the Radius Point, and the bearing of the long chord from BC to EC can all be calculated.
a) To determine the stationing of point PI, we subtract the station of BC (25+00) from the station of EC (31+00). The resulting difference gives us the stationing of point PI.
b) The deflection angle to station 26+00 can be calculated using the formula: deflection angle = (chord distance / radius) * (180 / π). By subtracting the station of BC from the given station (26+00), we obtain the chord distance. The radius can be determined based on the given tangents and the intersection angle.
c) The chord distance to station 26+00 from BC is obtained by subtracting the station of BC (25+00) from the given station (26+00).
d) The bearing from BC to the Radius Point can be determined by taking the bearing of the back tangent line (N 450 E) and adding the intersection angle at point PI.
e) The bearing of the long chord from BC to EC can be calculated by taking the bearing of the back tangent line (N 450 E) and adding 90 degrees.
By applying the appropriate calculations and substituting the given values, the stationing of PI, deflection angle, chord distance, and bearings can be obtained for the provided problem.
Learn more about tangent here: https://brainly.com/question/22756277
#SPJ11
Write 2 paragraphs around 400 words each for, What are the differences between "immoral", "moral", and "amoral"? Gives examples. The paragraphs should be what is immoral and moral and the differences and the pther paragraph what is amoral and how is immoral/moral different from amoral.
The concepts of what is considered moral and immoral vary greatly across different societies and cultures. Generally, morality is thought to refer to what is socially acceptable behavior that benefits individuals, societies, the environment, etc.
Immoral behavior is considered to be that which is unethical, dangerous, and typically not accepted by any group of people. Examples of immoral behavior include murder, theft, animal cruelty, and lying. Moral behavior, on the other hand, is considered to comply with the accepted norms of society and is typically thought of as positive and beneficial for everyone involved.
Examples of moral behavior include respecting the privacy of others, keeping promises, obeying traffic laws, truthfulness, and treating animals with kindness and respect. While there is some overlap between what is considered moral and immoral, also it is important to note that what is considered moral can change over time as social norms shifts over the course of time.
The concept of being amoral is quite different from both moral and immoral. Amoral generally refers to a behavior or attitude that lacks moral perspective and is not guided by any ethical considerations.
know more about about environment here
https://brainly.com/question/5511643#
#SPJ11
What is the tolerance assuming the third order surveying when the closed loop distance is 1821 ft? a) 2.13 ft b) 1.68 ft O c) 0.23 ft d) None of the given answers O e) 0.29 ft Of) 0.03 ft g) 0.02 ft
The tolerance when the closed-loop distance is 1821 ft in third-order surveying is 0.23 ft. Therefore, option c) 0.23 ft is the correct answer.
Third order surveying is also known as a Class III survey, which means a highly precise survey of engineering works, construction projects, or property boundaries with significant horizontal and vertical control.
However, we can calculate the tolerance by using the following formula: Tolerance = K√(L)where K is the constant value and L is the length of the line measured .Let's plug the values of K and L into the formula: Tolerance = 0.01 x √1821Tolerance ≈ 0.23 ft Hence, the tolerance assuming third-order surveying when the closed-loop distance is 1821 ft is 0.23 ft.
To know more about tolerance visit :-
https://brainly.com/question/30478622
#SPJ11