Answer:
number
Explanation:
2 is right
Pls help I’m failing
This is probably something you learned in elementary school: Rivers almost never flow in a straight line. Instead, they twist and turn along serpentine paths
-------
curved
I'm sorry for asking so many questions this assignment is past due and I need it done NOW
Answer:
7N to the right
Explanation:
Which of the following statements is
incorrect about heat and
temperature?
this is when an organism like insects or plants become trapped in amber
thats very nice lol, things stuck in amber are very cool
What is the difference between a dominant and recessive trait?
Answer: Dominant traits are always expressed when the connected allele is dominant, even if only one copy of the dominant trait exists. Recessive traits are expressed only if both the connected alleles are recessive. hope this helps
Explanation:
When a dominant trait is present it will always show. For example long tails are dominant. (Ll and LL will both result in long tails). For recessive traits you need two of them for the trait to show. For example short tails are recessive. (You HAVE to get ll for the short tail trait to show in the offspring.
Can someone help me with the rest of the questions pls
Answer:
2. About 138 g of KI will dissolve in 100 g of water at 10°C
3. 34.5 g of KI will dissolve in 25 g of water
4. The solution is not saturated but is unsaturated
Explanation:
From the graph:
1. KI is more soluble than KCl at 10°C because approximately 138g of KI dissolves at 10°C compared to 30 g of KCl per 100 g of water
2. About 138 g of KI will dissolve in 100 g of water at 10°C
3. 138 g of KI dissolves in 100 g of water at 10°C
In 25 g of water which is 1/4 × 100 g of water, 138/4 g = 34.5 g of KI will dissolve
Therefore, 34.5 g of KI will dissolve in 25 g of water
4.At 20 °C, a saturated solution of NaNO₃ will contain about 88 g of NaNO₃ in 100 g of water.
The solution prepared by the chemist contains 45 g of NaNO₃ in 100 g of water at 20 °C. The amount of solute present in the solution is less thanthe solvent can dissolve at that temperature, therefore, the solution is not saturated.
The upper part of the mantle is
Hard
OR
Soft
Answer: Hard
Explanation:
The upper part of the mantle is hard as it contains thick rock layers. The mantle's upper layer and the crust make up a brittle and rigid rock that's referred to as the Lithosphere.
The upper mantle starts below the Earth crust and then stops at the start of the lower mantle. We should note that the upper mantle results in the movement of the tectonic plates.
how does carbon apply to real life
Answer: This is the magic element for everything on Earth. All life on Earth depends on carbon (C). It is in nearly every biological compound that makes up our bodies, systems, organs, cells, and organelles. When you breathe out, there is a lot of carbon dioxide (CO2).
Explanation:
Answer:
Like Carbon dioxide? or just like carbon? well anyway we breath in oxygen and breath out carbon the carbon goes into the air and gets re-cleaned turned into oxygen again. And also thousands of cars that run everyday going places let out tons of carbon into the the air every minute. (aka which is bad for human society, considering there's probably more carbon in the air then there is oxygen.)
Explanation:
So yes carbon does apply in everyday life. By the way the other person is right too. :)
sugar cannot be separated from sugar solution by filtering explain why?
Answer:
The sugar particles are so small that they have dissolved in the water, and can easily pass through the filter.
Answer:
Sugar can not be separated due it has very fine particles.
Explanation:
When we use to separate sugar with salt they both are dissolved with the water.
Which of the statements below are TRUE, knowing what we know about forces and motion?
Choose ANY that are TRUE.
A. Objects at rest need a force to keep them at rest.
B. A net force causes objects to accelerate.
C. If forces acting on an object are balanced, the object can change its velocity.
D.Inertia means that an object will keep its same state of motion.
Mass and weight are the same thing and are both forces.
Answer:
b
Explanation:
if there is a net force acting on an object, the object will have an acceleration and the objects velocity will change
Weathering and erosion can turn metamorphic rock into sediment. Which of the following processes would turn that sediment into sedimentary rock? * 10 points weathering and erosion compaction and cementation heat and pressure melting
Answer:
compaction and cementation
Explanation:
sedimentary rock is layered rock, in order to become sedimentary it most be compacted to form layers and cemented to become hard. This is what i think. Hope i can help :)
An object accelerates at 8 m/s2 when a force of 40 N is applied to it. What is the mass of the object
Answer:
f=ma
40=m*8
m=5kg
another object of same mass is added
=>m=5+5=10kg
f=10*8=80N
Explanation:
What is the best way to ask out a girl you really like but your afraid to ask her out
Answer:
I would say try hinting it to her, not in an obvious way but kind of flirt. Make sure to be yourself!
How many atoms are in 0.35 moles of carbon (SHOW WORK)
Answer:
2.108x10²³ atoms
Explanation:
In order to convert from moles (of any substance) to atoms (or molecules), we need to use Avogadro's number: It is the number of units in one mol.
In one mol there are 6.023x10²³ atoms.
0.35 mol * 6.023x10²³ atoms/mol = 2.108x10²³ atoms
Thus, in 0.35 moles of carbon there are 2.108x10²³ atoms.
Explain why carbon dioxide is a gas, water
is a liquid, and salt is solid at room temperature based on how the particles
are held together.
Answer:
Carbon dioxide is a gas because the particles surrounding it are more spread out and free from each other. Water is a liquid because the particles are partially spread out and have a medium space to move around. And due to the room temperature, salt's particles can either be hot and move rapidly, or be cold and not move rapidly.
Explanation:
In humans, genetic material in the cell is organized into
A. 46 pairs of chromosomes.
B. 23 pairs of chromosomes.
C. 23 chromosomes.
D. 32 chromosomes.
PLEASE HELP IMMEDIATELY
Answer:
Ability to move
Must be able to eat
grow and develop
reproduce
respond to environment
taking in food
Explanation:
Hope this helped! Have a good day!
What contribution did Niels Bohr make to atomic theory?
O A. He made a model of the atom called the plum-pudding model.
B. He performed an experiment that determined the charge of the
electron.
C. He made a model of the atom, with electrons circling the nucleus.
D. He discovered that the photoelectric effect was caused by light
shining on metal.
Answer:
C
Explanation
His greatest contribution is the atomic model
what is the only thing in nature that can be a solid,liquid,or gas?
A.water
B.hydrogen
C.helium
D.oxygen
pls answer will give brainliest
Answer:
A. Water
Explanation:
Virtually every known substance can be referred to as MATTER, as long as it has weight and occupies space. Matter can exists in three different forms namely: solid, liquid and gaseous states.
However, each state of matter has its own unique property that characterizes it. WATER is the only matter that can exists in the three different states as follows:
- LIQUID - WATER
- SOLID - ICE
- GASEOUS - STEAM OR VAPOUR.
(P) has two isotopes : P -31 and P - 32 . Let's say that the percent abundance of P - 31 is 75\% and for P-32 it is 25 %. What is the average atomic mass of phosphorus?
Answer: 2.3% :)
............................
Answer: 34%
Explanation:
How could the age be interpreted in a rock in which the blocking temperature has been reached?
Enter your answer in the provided box.
A gas initially at 5.48 L, 1.34 atm, and 61 °C undergoes a change so that its final volume and temperature are 1.32 L and 31 °C. What is its final pressure? Assume the number of moles remains unchanged.
atm
Answer:
5.06atm
Explanation:
Using the combined gas law equation;
P1V1/T1 = P2V2/T2
Where;
P1 = initial pressure (atm)
P2 = final pressure (atm)
V1 = initial volume (Litres)
V2 = final volume (Litres)
T1 = initial temperature (K)
T2 = final temperature (K)
According to the information provided in this question;
P1 = 1.34 atm
P2 = ?
V1 = 5.48 L
V2 = 1.32 L
T1 = 61 °C = 61 + 273 = 334K
T2 = 31 °C = 31 + 273 = 304K
Using P1V1/T1 = P2V2/T2
1.34 × 5.48/334 = P2 × 1.32/304
7.34/334 = 1.32P2/304
Cross multiply
334 × 1.32P2 = 304 × 7.34
440.88P2 = 2231.36
P2 = 2231.36/440.88
P2 = 5.06
The final pressure is 5.06atm
You have a 9.51 mol sample of an
unknown element. If the sample has a mass
of 1157.9376 g, what element is this?
Answer:
Antimony
Explanation:
Number of moles = 9.51 mol
Mass= 1157.9376 g
The identity of an element is obtained from it's Molar mass.
This is given by the equation;
Molar mass = Mass / Number of moles
Molar mass = 1157.9376 g / 9.51 mol
Molar mass = 121.76
The only element with molar mass of 121.76 is Antimony
Energy is transferred from an organism to the physical environment through __________.
A. respiration
B. heat loss
C. photosynthesis
D. consumption
CHEMISTRY HELP PLEASE
how do you determine what unit to put k in (rate law)?
I think the first option
Explanation:
Sorry If I was wrong.
The molar mass for this compound is 102.1 g/mol.
The molecular formula for this compound is
what are three disadvantages of making and using plastic?
What was the niche of the lion king
Answer:
Known as the "king of the jungle" or the "king of beasts," lions are at the top of the food chain, and they hunt and eat other animals to survive. Their niche in the ecosystem allows them to help with other animal population control and prevent the spread of disease.
Explanation:
Which of the following is an indication of a chemical reaction?
freezing
melting
release of heat
all of the above
Answer:
C
Explanation:
A chemical reaction is usually accompanied by easily observed physical effects, such as the emission of heat and light, the formation of a precipitate, the evolution of gas, or a color change.
copper(II) carbonate undergoes thermal decomposition. One of the pro
al decomposition is copper(II)oxide.
State the colour change of the solid seen during the reaction
start colour
end colour
Write a chemical equation for the thermal decomposition of copper(II) carbona
Answer: The green copper (II) carbonate [tex](CuCO_3)[/tex] changes to black copper oxide [tex](CuO)[/tex]
[tex]CuCO_3(s)\stackrel{\Delta }\rightarrow CaO(s)+CO_2(g)[/tex]
Explanation:
Decomposition is defined as the chemical reaction in which a single compound gives two or more simple substances. It requires energy to break the bonds between reactants, thus is an endothermic process.
Thermal decomposition uses heat for decomposition.
The chemical equation for thermal decomposition of copper (II) carbonate is:
[tex]CuCO_3(s)\stackrel{\Delta }\rightarrow CaO(s)+CO_2(g)[/tex]
The green copper (II) carbonate [tex](CuCO_3)[/tex] changes to black copper oxide [tex](CuO)[/tex]