Answer:
The idle speed of a running compression should be between 50-75 PSI and that is about half of the static compression.
Explanation:
The Running or Dynamic compression is used to determine how well the cylinder in an engine is absorbing air, reserving it for the proper length of time, and releasing it to the exhaust. The static or cranking compression test is used to check the sealing of the cylinder. Before performing the running compression test, the static compression test is first performed to rule out other issues like bent valves.
The standard value for the static compression is given by;
Compression ratio * 14.7 = Manufacturers Specification
The running compression should always be half of the static compression.
1.3. If the surface tension coefficient of a fluid is 0,07 N/m and the radius
of the droplet is 2,5 mm. calculate:
1.3.1 surface tension force
(2)
1.3.2 difference in pressure of the droplet
(1)
Answer:
A) F = 0.011 N
B) ΔP = 5.6 N/m²
Explanation:
We are given;
surface tension coefficient; S = 0.07 N/m
Radius; r = 2.5 mm = 0.025 m
A) Formula to find the surface tension force(F) is given by;
F = SL
Where L is effective length = 2πr
F = 0.07 × 2π × 0.025
F = 0.011 N
B) Formula for difference in pressure droplet is;
ΔP = 2S/r
Thus;
ΔP = (2 × 0.07)/0.025
ΔP = 5.6 N/m²
yall know what this is called?
Answer:
oof no bro
Explanation:
Can someone help me plz!!! It’s 23 points
Answer:
0.00695 A
Explanation:
µ represents [tex]10^{-6}[/tex]. Multiply this by 6,950.