Which vector has an x-component with a length of 4?

Answer:

[tex]m=35.58 kg[/tex]

Explanation:

Using the first Newton's equation

[tex]\Sum F_{T}=F-mgsin(25)-\mu mgcos(25)=0[/tex]

We just need to solve it for m:

[tex]m=\frac{F}{g(sin(25)+\mu cos(25))}[/tex]

[tex]m=\frac{350}{9.81(sin(25)+0.64cos(25))}[/tex]

[tex]m=35.58 kg[/tex]

I hope it helps you!

Answer:

D. the water's latent heat of vaporization is being pulled from the air.

Explanation:

A swamp cooler also generally referred to as the evaporative cooler is an electronic device that uses moisture to cool air. This simply means that, the electronic device works on the principle of evaporation of water to cool the surrounding air.

In swamp coolers, water absorbs large amount of warm air via the evaporative wet cooler pad, so as to evaporate and consequently cooling the air effectively and efficiently.

Swamp coolers are effective because the water's latent heat of vaporization is being pulled from the air.

The latent heat of vaporization can be defined as the energy that is being absorbed by water during evaporation.

The swamp coolers are typically made up of the following essential components, these are;

1. Float.

2. Blower.

3. Pump.

4. Evaporative pad.

5. Water supply valve.

Hence, through the principle of evaporative cooling (latent heat of vaporization), swamp coolers reduces or lower the air temperature in its surroundings.

Answer:

B and D

Explanation:

The wavelength of the wave will be 4 meters. when 5 complete waves occupy a length of 20m.

Wavelength is defined as the space between waves' crests, particularly between electromagnetic or sound wave points. A recurring event's frequency is measured by how many times it occurs in a unit of time. To underline the difference from spatial frequency, it is also occasionally referred to as temporal frequency.

There is an inverse relationship between the frequency and the wavelength of the waves as the wavelength increases the frequency decreases and if the wavelength decreases the frequency increases.

Given that a wave has 5 complete waves occupying a length of 20m. The wavelength of the wave will be calculated as below:-

λ = Distance / frequency

λ = 20 / 5

λ = 4 meters

Therefore, the wavelength of the wave will be 4 meters. when 5 complete waves occupy a length of 20m.

To know more about wavelength follow

https://brainly.com/question/6297363

#SPJ2

Answer:

15m/s

Explanation:

500 ÷ 50 = 10m/s

1500 ÷ 75 = 20m/s

10 + 20 = 30

30 ÷ 2 = 15m/s

Answer: 16 miles per second

Explanation:

Find the total distance traveled and the total time.

[tex]\text{average rate}=\dfrac{1500+500}{75+50}=\dfrac{2000\ miles}{125\ second}=\large\boxed{16\ mps}[/tex]

Answer:

LED;

      The energy of photons emitted by an LED is dictated by the band gap of the semiconductor used – the energy required to make an electron–hole pair. When an electron and hole recombine in a radiative process, a photon carries away the extra energy.

BULB

        In the light bulb, the flow of charge through the filament heats it up and causes it to glow. In this way, the light bulb converts electrical energy to heat energy and light energy. ... 1, chemical potential energy is converted to electrical energy, which is immediately converted to light energy and heat energy

       This flow of charge converts chemical potential energy into electrical energy. In the light bulb, the flow of charge through the filament heats it up and causes it to glow. In this way, the light bulb converts electrical energy to heat energy and light energy. bulb have a fillament but LED have no filament they produce energy through clod process but bulb have a filament and they produce energy through hot process

Explanation:

This progression of charge changes over substance expected vitality into electrical vitality. In the light, the progression of charge through the fiber warms it up and makes it shine. Along these lines, the light believers electrical vitality to warm vitality and light vitality.

hope soo u can understand my point

Answer:

43,919.66 Kilotones de Co2 en 2016.

Explicación:

Ecuador produce 43,919.66 Kilotones de Co2 en 2016. Las tierras húmedas son muy importantes para la biodiversidad porque proporcionan hábitat a millones de animales. Alrededor del 35 por ciento de todas las especies amenazadas y en peligro vive en estas tierras húmedas. Estas tierras húmedas son altamente productivas y tienen la capacidad de mejorar la calidad del agua, prevenir la degradación del suelo y proporcionar alimentos a los animales que viven en estas tierras húmedas.

Answer:

The overall charge on the wall is zero.

Explanation:

Because the atoms making the wall are neutral i.e. number of positive charges are equal to number of negative charges.

Answer:

Transverse wave  and Longitudinal wave  and Electromagnetic wave

Explanation:

Answer:

Transverse wave  and Longitudinal wave  and Electromagnetic wave

Explanation:

Explanation:

To blow up a balloon, start by pinching the neck of the balloon with your index finger and thumb. Then, take a deep breath and put the opening of the balloon in between your lips. When you're ready, loosen your grip on the neck and blow into the balloon opening so the balloon starts to fill with air.May

Answer:

c i took the test

Explanation:

The total amount of energy in this scenario is transformed into other forms of energy because of the burning process of the wood.

The energy present in the wood change into other forms of energy such as heat and radiant energy. We know that during a reaction, matter is transformed into another form with the release of different types of energy.

So we can conclude that he total amount of energy in this scenario is transformed into other forms of energy because of the burning process of the wood.

Learn more about energy here: https://brainly.com/question/13881533

Answer:

people in urban areas strip the soil of nutrition and makes it difficult to grow crops. people of urban areas consume more energy,food,and water. people in urban areas remove minerals and metals from the ground so, urbanization is a contribution to pollution .

Explanation:

it may help you and give me brainliest

Answer:

pollution and loss of trees not to mention how much electricity we use which doesnt benefit the world.

Explanation: because when we urbanize things we get rid of natural resources around us

Answer:

The answer to this should be: 5.0 x 10⁸ Hz

Explanation:

The speed, s, of a wave, equals the product of its frequency, ν, times its wavelength, λ:

s = νλ.

As the question states, the speed of an electromagnetic wave is a constant, c, equal to 3.0 × 10⁸ m/s.

Substituting this constant in the equation for the speed of the wave, you get:

c =  νλ.

From that equation, you can solve for the frequency to show the inverse realation of frequency and wavelength:

ν =  c / λ

Now, you just have to substitute values and compute, leaving you with:

5.0 x 10⁸ Hz

Answer:

Please INCLUDE a picture.

Explanation:

You did not include a picture, so there is no way to tell how the charges will interact with each other.

Please INCLUDE a picture.

The net force acting on q1 is 3.2 N to the right.

The force on q₁ due to q₂ is:

F1 = k * q₁ * q₂ / r²

where:

k is Coulomb's constant, which is 8.98755 × 10⁹ N m² C⁻²

q₁ is the charge of q₁, which is +2.0 × 10⁻⁵ C

q₂ is the charge of q₂, which is -4.0 × 10⁻⁵ C

r is the distance between q₁ and q₂, which is 0.1 m

Plugging in the values, we get:

F₁ = 8.98755 × 10⁹ N m² C⁻² * 2.0 × 10⁻⁵ C * -4.0 × 10⁻⁵ C / (0.1 m)²

= 6.4 N

The force on q₁ due to q₃ is:

F₂ = k * q₁ * q₃ / r²

where:

k is Coulomb's constant, which is 8.98755 × 10⁹ N m² C²

q₁ is the charge of q₁, which is +2.0 × 10⁻⁵ C

q₃ is the charge of q₃, which is -4.0 × 10⁻⁵ C

r is the distance between q₁ and q₃, which is 0.2 m

Plugging in the values, we get:

F₂ = 8.98755 × 10⁹ N m² C⁻² * 2.0 × 10⁻⁵ C * -4.0 × 10⁻⁵ C / (0.2 m)²

= 16 N

The net force on q₁ is the sum of F₁ and F₂:

Fnet = F₁ + F₂

= 6.4 N + 16 N

= 22 N

The net force on q1 is to the right because both F₁ and F₂ are to the right.

Net electric field

The net electric field acting on q1 is 3.2 N/C to the right.

To learn more about net electric field, here

https://brainly.com/question/30577405

#SPJ2

Answer:

Explanation:

a. CH₄- Covalent bonding(ligação covalente)

b. SrO- ionic bonding (ligação iônica)

c. HBr- Polar Covalent bonding (ligação covalente polar)

d. NH₃ - covalent bonding(ligação covalente)

e. Cl₂O - Covalent bonding (ligação covalente)

f. Li₂O- ionic bonding (ligação iônica)

g. CO₂ - double covalent bonding (ligação covalente dupla)

h. MgCl₂- ionic bonding(ligação iônica)

Answer:

85.0 please I don't understand

Answer:

total number of modes is 8

Explanation:

attached here is the calculations

Answer:

Inductance per unit length, [tex]\frac{L}{l} = 7.02 * 10^{-7} H/m[/tex]

Explanation:

Radius of the wire, a = 2.80 mm

Currents carried by each of the wires, i = 5.00 A

Center-to-Center Separation, W = 19.0 cm

The flux in the wires is given by the equation, ∅ = Li

The Net flux of the region between the wires  is given by the equation:

[tex]\phi = \frac{l \mu_0 i}{\pi} ln(\frac{W-a}{a})[/tex]

Divide both sides by l to get the net flux per unit length

[tex]\phi/l = \frac{ \mu_0 i}{\pi} ln(\frac{W-a}{a})\\\phi/l = \frac{ 4 \pi * 10^{-7} i}{\pi} ln(\frac{0.019-0.0028}{0.0028})\\\phi/l = 7.02 * 10^{-7} i\\\frac{Li}{l} = 7.02 * 10^{-7} i\\\frac{L}{l} = 7.02 * 10^{-7} H/m[/tex]

Answer:

a = 1.07 m/s^2

Explanation:

The computation of the acceleration is shown below:

As we know that

[tex]v_f^{2} - v_i^{2} = 2 ad[/tex]

where,

v_i = 0 m/s  = initial speed

v f = 8 m/s  = final speed

d = 30m = distance

Now placing these values to the above equation

[tex]8^{2} - 0 = 2 \times a \times 30[/tex]

64 = 60a

a = 1.07 m/s^2

We simply applied the above formula so that we could able to determine the acceleration

Answer:

Ted is correct

Explanation:

The equation for gravitational potential energy is PE = m·g·h

The equation for gravitational kinetic energy is KE = 1/2·m·v²

Where:

m = Mass of the object (The racing car)

g = Acceleration due to gravity

h = The height to which the object is raised

v = Velocity of motion of the object

From the principle of conservation of energy, energy can neither be created nor destroyed but changes from one form to another, we have;

Potential energy gained from location at height h = Kinetic energy gained as the object moves down the level ground

m·g·h = 1/2·m·v² canceling like terms gives

g·h = 1/2·v²

v = (√2·g·h)

If the speed is doubled, we have

2·v = 2× (√2·g·h) =  (√2·g·4·h)

Therefore, if 2·v = v₂ then v₂ =  (√2·g·4·h)

Since g, the acceleration due to gravity, is constant, it means that the initial  height must be multiplied or increased 4 times to get the new height, that is we have;

v₂ =  (√2·g·4·h) = (√2·g·h₂)

Where:

4·h = h₂

Which gives;

v₂² = 2·g·h₂

1/2·v₂² = g·h₂

1/2·m·v₂² = m·g·h₂ Just like in the first relation

Therefore, Ted is correct s they need to go up four times the initial height to double the speed.

Answer:

C. the blue colour of the Earth's sky

Explanation:

The Pleiades is a cluster of sister stars that are among the closest star cluster to earth.

The reflection nebula of the Pleiades is due to the scattering of the blue light from the hot blue luminous stars that dominate the star cluster. Th blue light is scattered from dust molecules, thought to be predominantly carbon compound like diamond dusts, and other compounds like iron.

The blue colour of the Earth's sky is the closest terrestrial phenomenon to the reflection nebula. On a clear cloudless day, molecules in the air scatter the blue component of light more than the other component colours of white light, giving the sky its characteristic blue coluor.

The common characteristics of the luminous nebula and the Earth's blue sky is that they both have their light scattered by the presence of small particles.

Answer:

we have to measure distances and time, possibly with an automated system since the values ​​are very small

Explanation:

For this exercise we can use the relationship between momentum and momentum

        I = ∫ F dt = Δp

        F t = m [tex]v_{f}[/tex] - mv₀

In the exercise they indicate that the final speed is zero

         F t = - m v₀

         F = -m v₀ / t

With this equation we can find what measurements should be carried out.

To find the speed with which the car collides with the wall, less measure the displacement and its time during the braking process before reaching the wall and from here find the speed with which it reaches the wall.

During the impact, we must find the time that the vehicle is in contact with the wall in the first approach is equal to the time that the car takes to reach the final speed of zero.

In summary we have to measure distances and time, possibly with an automated system since the values ​​are very small

Answer:

[tex]d_{2}[/tex] = 169 cm

Explanation:

Mass 1 = 45 kg   => Force = 450 N

Mass 2 = 29 kg   => Force = 290 N

According to principle of moments:

=> [tex]F_{1}d_{1} = F_{2}d_{2}[/tex]

Where [tex]F_{1}[/tex] = 450 N, [tex]d_{1}[/tex] = 109 cm and [tex]F_{2}[/tex] = 290 N

=> (450)(109) = 290[tex]d_{2}[/tex]

=> 49050 =  290[tex]d_{2}[/tex]

Dividing both sides by 290

=> [tex]d_{2}[/tex] = 169 cm

Answer:

B

Explanation:

Answer:

Water is non-polar molecule False

Water is polar molecule because the electronegativity of Oxygen is much greater than electronegativity of hydrogen and it has also a bend shape that is why it is polar molecule.

Explanation:

I hope this will help you :)

False. Water is a polar molecule.

Water (H2O) consists of two hydrogen atoms and one oxygen atom. The oxygen atom has a higher electronegativity, meaning it attracts electrons more strongly than hydrogen.

As a result, the shared electrons in the covalent bonds between hydrogen and oxygen are pulled closer to the oxygen atom, creating an uneven distribution of charge.

This leads to a partial negative charge (δ-) on the oxygen atom and partial positive charges (δ+) on the hydrogen atoms, making water a polar molecule.

More on polarity of water can be found here: https://brainly.com/question/30530422

#SPJ6

Answer:

A.) H = 58.6 m

B.) T = 6.92 s

C.) 345.12 m

D.) V = 22.13 m/s

E.) Ø = 32.1 degree

Explanation:

Given that the

initial speed U = 60.3 m/s

Angle Ø = 34.2 degree

A.) At maximum height, final velocity V is equal to zero.

Using the third equation of motion under gravity.

V^2 = U sin Ø^2 - 2gH

Substitute for U and g. Where g = 9.8 m/s^2

0 = (60.3 sin 34.2)^2 - 2 × 9.8 × H

1148.78 = 19.6 H

H = 1148.78/19.6

H = 58.6 m

B.) To Determine the total time in the air, let us use the formula

V = UsinØ - gt

At maximum height, V = 0

t = UsinØ/g

Total time T = 2t

Therefore, T = 2UsinØ/g

T = (2 × 60.3 × sin 34.2)/9.8

T = 67.79/9.8

T = 6.92 s

C.) To determine the total horizontal distance covered which is the range, we will use second equation of motion.

S = UcosØT - 1/2gt^2

Where S = range R

g = 0, since the range is not a vertical distance

T = total time

Substitute all the parameters into the formula

R = 60.3 cos 34.2 × 6.92

R = 345.12 m

D.) After 1.2 s firing,

V = UsinØ - gt

Where t = 1.2 s

Substitute into the formula

V = 60.3 × sin34.2 - 9.8 × 1.2

V = 33.89 - 11.76

V = 22.13 m/s

Therefore the speed of the projectile 1.20 s after firing is 22.13 m/s

E.) The direction will be determined by using the formula

t = VsinØ/ g

Cross multiply

VsinØ = gt

Make SinØ the subject of formula

SinØ = gt/V

SinØ = (9.8×1.2)/22.13

Sin Ø = 11.76/22.13

Sin Ø = 0.53

Ø = sin^-1( 0.53 )

Ø = 32.1 degree

Answer:

Zero

Explanation:

The magnetic field due to the first wire on the second wire with current i₁ in the first wire at a distance d from the second wire is B₁ = μ₀i₁/2πd.

The magnetic force due to this field on the second wire of length segment, L and current i₂ is F₁ = Bi₂L = (μ₀i₁/2πd)i₂L = μ₀i₁i₂L/2πd = F

The magnetic field due to the second wire on the first wire with current i₂ in the first wire at a distance d from the second wire is B₂ = μ₀i₂/2πd.

The magnetic force due to this field on the first wire of length segment, L and current i₁ is F₂ = Bi₁L = (μ₀i₂/2πd)i₁L = μ₀i₁i₂L/2πd = F

Since their magnetic fields are in opposite directions, according to the right hand rule, their forces would also be in opposite directions.

So F₁ = F and F₂ = -F

So their vector sum F₁ + F₂ = F +(-F) = F - F = 0

Complete Question

The complete question is shown on the first uploaded image

Answer:

The force is  [tex]\= F = (-0.001089, 0 ,0)[/tex]

Explanation:

From the question we are told that

      The magnetic dipole moment of first magnet  is  [tex]z_1 = (6,0,0) A \cdot m^2[/tex]

       The magnetic dipole moment of second magnet  is  [tex]z_2 = (7,0,0) A \cdot m^2[/tex]

       The location of the second magnetic dipole moment is  [tex]x = 0.39 \ m[/tex]

Generally the vector force on the second magnet due to the first is mathematically evaluated as

         [tex]\= F =- \frac{\mu_o }{4 \pi} * \frac{6 * z_1 * z_2}{x^4}[/tex]

Where  [tex]\mu _o[/tex] is the permeability of free space with value  [tex]4\pi * 10^{-7} N/A^2[/tex]

substituting values

            [tex]\= F = - \frac{ 4\pi * 10^{-7} }{4 \pi} * \frac{6 * 6 * 7}{0.39^4}[/tex]

           [tex]\= F = (-0.001089, 0 ,0)[/tex]

Note the negative sign show that the force is an attraction force

Answer:

V = 2.5 J/C

Explanation:

Given:

Energy = E = 20 J

Charge = Q = 8 C

Required:

Potential Difference = V = ?

Formula:

V = [tex]\frac{E}{Q}[/tex]

Solution:

V = 20/8

V = 2.5 J/C

Answer:

Given :

To Find :

Using Formula :

We know that the electric potential difference is also known as voltage (v).

[tex]{\star{\small{\underline{\boxed{\sf{\red{ V =\dfrac{E}{Q}}}}}}}}[/tex]

Solution :

Substituting the given values in the formula to find potential difference :

[tex]{\dashrightarrow{\small{\pmb{\sf{ V =\dfrac{E}{Q}}}}}}[/tex]

[tex]{\dashrightarrow{\small{\sf{ V =\dfrac{20}{8}}}}}[/tex]

[tex]{\dashrightarrow{\small{\sf{ V = \cancel{\dfrac{20}{8}}}}}}[/tex]

[tex]{\dashrightarrow{\small{\sf{ V = {\dfrac{10}{4}}}}}}[/tex]

[tex]{\dashrightarrow{\small{\sf{ V = \cancel{\dfrac{10}{4}}}}}}[/tex]

[tex]{\dashrightarrow{\small{\sf{\underline{\underline{\purple{V = 2.25}}}}}}}[/tex]

Hence, the potential difference is 2.25V.

[tex]\underline{\rule{220pt}{3pt}}[/tex]

Answer:

[tex]\large \boxed{\text{761 kJ}}[/tex]

Explanation:

You calculate the energy required to break all the bonds in the reactants.

Then you subtract the energy needed to break all the bonds in the products.

                        N₂  +   O₂   ⟶         2NO

                     N≡N  + O=O ⟶       2O-N=O

Bonds:         2N≡N   1O=O        2N-O + 2N=O

D/kJ·mol⁻¹:     941      495           201      607

[tex]\begin{array}{rcl}\Delta H & = & \sum{D_{\text{reactants}}} - \sum{D_{\text{products}}}\\& = & 2 \times 941 +1 \times 495 - (2 \times 201 + 2\times 607)\\&=& 2377 - 1616\\&=&\textbf{761 kJ}\\\end{array}\\\text{The enthalpy of reaction is $\large \boxed{\textbf{761 kJ}}$}.[/tex]

Answer:

The uterus plays a significant part in the pregnancy, menstruation, zygote implantation, conception, labor, and delivery of the baby along with other essential reproductive system organs.

Explanation:

The uterus is a female reproductive organ that is pare shaped and situated between the urinary bladder and the rectum ins the pelvis.  The placenta develops links with the uterine blood vessels that provide the embryo with nutrition through an umbilical cord. When this happens, the uterus delivers signals to the brain to adjust the secretion of the hormone such that releases of more eggs (i.e. ovulation) are halted and the menstrual cycle momentarily stops, thereby verifying the pregnancy. In pregnancy the uterus provides the space and an adequate atmosphere for the fetus to develop safely, it provides feedback to the brain which regulates hormones release. The uterus forms a link between the mother and the baby through the placenta and umbilical cord not only to provide the requisite nutrients and oxygen but also to extract the waste products and purify the blood of the fetus before the fetal organs take over.