Answer:
the changes are physical changes
10. What is the mass number, symbol, and
charge of an ion that contains 87 protons,
136 neutrons and 86 electrons?
Explanation:
mass number = sum of protons and neutrons
= 87 + 136
= 223
chemical symbol = Fr
ion charge = +1 (because it has one more proton than electron)
atomic mass number = sum of protons and neutrons
= 87 + 136
= 223
chemical symbol = Fr, ion charge = +1 (because it has one more proton than electron)
What is atomic mass ?Atoms are the basic and smaller units of elements which cannot be broken down further chemically, atoms and elements are organized and represented onto a display called the periodic table.
Atoms are composed of protons, neutrons, and electrons, where protons and neutrons present at the nucleus center of the atom where as electron surrounds the nucleus.
The center of the atom makes up most of the mass of the atom as this is made up of protons and neutrons. Protons are positively charged particle and neutrons have neutral charge, respectively, and each are have a mass of 1 atomic mass unit (amu).
Electrons are negatively charged particle and Amu's are units of measurement for atomic mass, proton and neutron are both equal to 1 amu.
Atomic mass units are based on the masses of protons and neutrons band one carbon atom has only six protons and usually six neutrons in the nucleus.
For more details regarding atomic mass, visit
https://brainly.com/question/17067547
#SPJ2
in a paper chromatogram why is substance impure
Answer:
Chromatography is used to see if substance is pure or to identify the subtances in a mixture. Components of a mixture are identified by the relative distance travelled compare to the distance travelled by the solventExplanation:
I hope it helpsJerry designed a coat that he thinks could keep people dry during a thunderstorm. He created a prototype that looks just like his drawing. What should Jerry do next?
Answer:
The next step is prototype testing
Explanation:
The stages of the design process are;
1) Situation analysis
Paper based research is conducted on the situation to obtain the situation parameters
2) Brief writing
With the situation analysis developed above, the brief of the current situation is put down on paper
3) Problem research
The problem is researched and experimented on with the development of a paper based proof of the possible concept
4) Specification writing
The specifications of the problem are outlined
5) List the possible solutions
The possible solutions are brainstormed and listed
6) Preferred solution selection
The preferred solution is selected based on the constraints in the situation
7) Create working drawing/plan
The working design drawing of the selected solution or concept is completed and evaluated for applicability
8) Building of a prototype
The design is converted into a prototype which is a model of the actual solution
9) Testing of the prototype
The prototype is tested for functionality, for ability to work in the intended situation and/or in the intended system
10) Report writing
A report is made on the outcome of the tests for review before production
Therefore, after the prototype is created, stage 8, the next step is the testing of the prototype stage 9.
What is a strong base
how many grams of C are in 500g or NaHCO3
Answer: 71.43g
Explanation: The RMM of NaHCO3 is
23+1+12+16(3)=84.
There is one carbon in NaHCO3 thus there are 1×12g of C in NaHCO3.
Thus
85gNaHCO3-----12g C
500gNaHCO3---- xgram
(500×12)÷84= 71.43
Plz answer fasttt
There are several ways to model a compound. One type of model is shown.
4 C's are connected in a line by 3 black lines. The C on the left has 3 H's attached to it each by a black line. The next C has 1 H attached by a black line and 1 O attached by 2 black lines. The next C has 2 H's attached to it by 1 black line each. The last C has 2 H's attached to it by 1 black line each and 1 O attached by a single black line. That O has an H attached to it by 1 black line.
What is the chemical formula for the molecule represented by the model?
CHO
C4H9O2
C4H8O
C3H8O2
Answer:
I believe the answer would be C4H9O2.
someone help asap its due in 10 mins
Answer:
A. Species
Explanation:
The order from least to most specific is:
Kingdom
Phylum
Class
Order
Family
Genus
Species
HOW TO DO THIS QUESTION PLEASE
Answer:
solid
Explanation:
lithium is a solid so it would still be solid since it is at 100 degrees and has not yet gotten to 180 degrees which is when it melts
Is cannabinol soluble in 1-octanol?
Why or why not?
Answer: Uhmmmm this is what i got...-
Explanation:
It is a matter of fact that the hydrophobic (water-hating) oily compounds of cannabinoids such as CBD, THC and others are not water soluble. The term "water soluble" refers to materials which dissolve in water in a homogenous manner by becoming molecules or ions (such as sugar, alcohol, and salt).
Why is energy released when intermolecular bonds form?
Answer:
Forming bonds requires energy
Explanation:
Creating a bond is bringing 2+ atoms into a more stable position.
You travel 35 meters in 26 seconds, what is your average speed?
Answer:
1.346 meters per second
Explanation:
You traveled 35 meters in 26 seconds
35 / 26 = avg speed.
35 / 26 = 1.346...
Suggest a procedure for separating iron shavings from sawdust. Explain why this procedure would work.
Dont send a file i will report you if you do
Answer:
Magnetic separation
Sawdust is a non-magnetic material whereas iron shavings are magnetic. When a magnet is brought near a mixture of iron shavings and sawdust, the iron shavings will be attracted to the magnet while the sawdust will not. Thus, the iron shavings will be separated from the sawdust.
Explanation:
Separation techniques makes use of the differences in the properties of components of mixtures to separate theses components, one from another.
In a moxturemof iron shavings and sawdust, a suitable separation technique would be the use of magnetic separation.
The use of this separation technique is abasednonnthe principle that when a magnetnis brought near to a mixture containing magnetic and non-magnetic materials, the magnetic materials will be separated from the non-magnetic materials due to their attraction to the magnet. Sawdust is a non-magnetic material whereas iron shavings are magnetic. When a magnet is brought near a mixture of iron shavings and sawdust, the iron shavings will be attracted to the magnet while the sawdust will not. Thus, the iron shavings will be separated from the sawdust.
1) HA + H2O <--> H3O+ + A- ....what is HA considered?
O
Acid
Base
Conjugate Acid
Conjugate Base
3. Why are fossils so rare?
the conditions needed to form the
fossil are rare
most organisms die when eaten by
others
all organisms form fossils when
they die, we just have not found them
yet
Answer:
fossils are rare bc most dead organisms get decayed by environmental change and decomposers,most fossils are parts of bones and mostly found indry areas like deserts
Describe what and how solids look like
the lower the kinetic energy of the solute particles:
Answer:
the higher the kinetic energy
Explanation:
because their will be easy movement of particles.
A large dam was constructed across a river to create a reservoir on one side. This led to the sinking of nearby forests, which
impacted plants and animals and caused a decrease in biodiversity, Trees were also cut down to construct the dam, which led to
increased soil erosion and reduced soil fertility.
A scientist wants to reduce the impact of the dam's construction and improve the biodiversity of the ecosystem. Which solution
should the scientist choose?
A. relocating people to live in the area around the dam
B. planting trees around the reservoir to decrease soil erosion
c. using synthetic fertilizers to improve soil fertility
OD. building a small series of dams on nearby streams
Answer:
B
Explanation:
One of the main problems is the soil erosion reducing the fertitlity of the soil, thus reducing it's chances of the soil helping plant growth, thus reducing biodiversity. The other selections worsen the problem.
If nitrogen at 130 kPa is allowed to expand at constant temperature until its pressure is 145.5 kPa, how much larger will the volume become?
Answer:
0.89 times
Explanation:
Let the initial volume of the tank be V.
Finally, we shall determine how much larger the final volume of the gas will be. This is illustrated below:
Initial pressure (P₁) = 130 kPa
Initial volume (V₁) = V
Final pressure (P₂) = 145.5 kPa
Final volume (V₂) =?
P₁V₁ = P₂V₂
130 × V = 145.5 × V₂
130V = 145.5 × V₂
Divide both side by 145.5
V₂ = 130V / 145.5
V₂ = 0.89V
Therefore, the final volume of gas will be 0.89 times the initial volume.
Calcular las fracciones molares de los componentes de una disolución formada por: 250 g de agua, 50 g de ácido acético y 25 g de cloruro de sodio.
The question is: Calculate the molar fractions of the components of a solution made up of: 250 g of water, 50 g of acetic acid and 25 g of sodium chloride.
Answer: The mole fraction of water, acetic acid and sodium chloride is 0.916, 0.054, and 0.028.
Explanation:
As number of moles is the mass of substance divided by its molar mass.
Therefore, moles of given species are calculated as follows.
The number of moles of water (molar mass = 18 g/mol):
[tex]Moles = \frac{mass}{molar mass}\\= \frac{250 g}{18 g/mol}\\= 13.88 mol[/tex]
The number of moles of acetic acid (molar mass = 60.052 g/mol):
[tex]Moles = \frac{mass}{molar mass}\\= \frac{50 g}{60.052 g/mol}\\= 0.832 mol[/tex]
The number of moles of sodium chloride (molar mass = 58.44 g/mol):
[tex]Moles = \frac{mass}{molar mass}\\= \frac{25 g}{58.44 g/mol}\\= 0.427 mol[/tex]
Therefore, mole fraction of each component is calculated as follows.
Mole fraction of water:
[tex]Mole fraction = \frac{moles of water}{Total moles}\\= \frac{13.88}{13.88 + 0.832 + 0.427}\\= \frac{13.88}{15.139}\\= 0.916[/tex]
Mole fraction of acetic acid:
[tex]Mole fraction = \frac{moles of water}{Total moles}\\= \frac{0.832}{13.88 + 0.832 + 0.427}\\= \frac{0.832}{15.139}\\= 0.054[/tex]
Mole fraction of NaCl:
[tex]Mole fraction = \frac{moles of water}{Total moles}\\= \frac{0.427}{13.88 + 0.832 + 0.427}\\= \frac{0.427}{15.139}\\= 0.028[/tex]
Thus, we can conclude that mole fraction of water, acetic acid and sodium chloride is 0.916, 0.054, and 0.028.
pls can someone mention 5 example of fine chemicals
7. Buffalo were moved from Yellowstone National Park because
they carried a serious disease
they had killed other animals
they were no longer protected there
the herd had grown too large
Answer:
they had killed other animals
I believe your answer is carried a serious disease.
Explanation: Buffalo are known to carry a disease called brucellosis, which can spread to livestock a kill other animals/
i am boréd wanna chàt
yeah same I'm bóred too -,-
Answer:
sure hi ...............................
What is the percent composition of YAG (Yttrium Aluminum Garnet). The formula for
YAG is (Y3A15012).
Answer: Y 21.38 % , Al 32.44 % and O 46.16 %
Explanation: Molar mass of YAl5O12 is 88.91 + 5·26.98+12·16
= 415.81 g/mol
m-% ( Y) = 88.91 / 415.81 = 21.38 % , m-% (Al) = 5·26.98 / 415.81 =
32.44 % , rest is Oxygen
the highest concentration of life extorts in the top 200 meters of ocean water what is the most important factor that influences this concentration of life
You guys are working hard on this school work... You guys deserve to take a break, come hang out with me.
Answer:
hggggggggggggggggggggggggggggggggggggsssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssss
Explanation:
jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj
How many atoms of oxygen does the chemical formula show?
Al(HSO4)3
Answer:
This formula contains 12 oxygen atoms.
(1-6) Which of the electron movements shown below (A, B, C, or D) will emit the highest energy light?
A
B
с
D
na3
ng
n=5
n=6
ОА
OB
Ос
OD
Answer:
I would say D (not sure tho)
Explanation:
What type of reaction is Fe+H2O=Fe3O4+H2
Answer:
single replacement
Explanation:
it's when one element starts out by itself, then replaces another element in a compound, kicking it out
Answer: This is a chemical reaction
Explanation: Hope this helps:)))
→
1. A + 2B→→→→D
The rate of formation of D in the above reaction is found experimentally to be
independent of the concentration of B
and to quadruple when the
concentration of A is doubled.
Write the rate law for the reaction
Answer:
[A]²
Explanation:
Since the formation is independent of D, D is 0 order.
Since a quadruples when it is doubled it can be written as
2A^X= 4
To find the unknown power we can assume A= 1 to make the math simple. So When a = 2 (Because you doubled it) raised to X power it will equal 4
so the unknown power is 2
Making the rate law
[a]²[b]⁰
or simply just
[A]²
Rutherford used his gold foil experiment as evidence for a new atomic model. He suggested that the atom contained a small
positively charged nulceus surrounded by a large void filled with only a few electrons orbiting the nucleus.
What other experiment or evidence assisted in the creation of this model?
A)
Electrons in orbit would be captured by a nucleus.
B)
The precise location of an electron is impossible to acertain.
o
The plum pudding model of the atom agreed with the nuclear model
D)
Thomson discovered the atom contained negatively charged electrons.
Nature of Science
SC6N22) New Evidence
ID:7495
Answer:
The plum pudding model of the atom agreed with the nuclear model
Explanation:
Answer:
D) Thomson discovered the atom contained negatively charged electrons.
Explanation:
Without previous discoveries such as the electron, Rutherford would not have generated his nuclear model. So, Thomson had to discover the atom contained negatively charged electrons first.
Hope this helps :)