Which type of bonding forms due to electrical attractions between oppositely charged elements

Answer:

The s-, p-, and d-block elements of the periodic table are arranged into 18 numbered columns, or groups. The elements in each group have the same number of valence electrons. As a result, elements in the same group often display similar properties and reactivity.

Explanation:

On the periodic table, a group refers to a vertical column of elements that share similar chemical properties.

For the main groups, the characteristic do the elements have in common is valence electron configuration and chemical reactivity.

On the periodic table, a group refers to a vertical column of elements that share similar chemical properties. These elements are arranged in such a way that they have the same number of valence electrons, which are the electrons in the outermost energy level (shell) of their atoms. The number of valence electrons is a critical factor in determining the chemical behavior and reactivity of elements, as it governs their ability to form chemical bonds with other elements.

Main group elements, also known as representative elements, are located in the s-block and p-block of the periodic table. These elements are found in Groups 1, 2, and 13 to 18. Each main group is labeled with a number from 1 to 18.

Here are the main characteristics that elements in the same main group (vertical column) have in common:

1. Valence Electron Configuration: Elements in the same main group have identical valence electron configurations. For example, elements in Group 1 (alkali metals) all have one valence electron in their outermost energy level (ns¹), while elements in Group 18 (noble gases) have a full outermost energy level.

2. Chemical Reactivity: Due to their identical valence electron configuration, elements in the same group show similar chemical reactivity. They tend to form similar types of chemical bonds and react similarly with other elements to achieve a more stable electron configuration.

3. Periodic Trends: Main group elements within a group exhibit predictable trends in their physical and chemical properties as you move from the top to the bottom of the group. For example, the atomic radius tends to increase, ionization energy tends to decrease, and metallic character tends to increase as you go down a group.

To know more about periodic table here

https://brainly.com/question/28747247

#SPJ2

Answer:

An example of elevation is a plane flying at 36,000 feet above the ground. An example of elevation is a pope being raised to the position of saint. An example of elevation is a ballet dancer leaping three feet in the air. ... At 8,850 m (29,028 ft), the summit of Mount Everest is the highest elevation on Earth.

Explanation:

please mark me brainly!

Answer:

I think the heat on the surface or the fire under the dish cost evaporation coz when the water got heat tge water evaporate or go to the upper part of dish and cool down then back to the bottom.

Explanation:

Plss correct me if im wrong

Explanation:

First Question

Group 18 elements. This is because the noble elements do not conduct electricity.

Second Question

Chewing in the mouth breaks food into small pieces

Third Question

How many atoms of each element are present in the molecule?

7 carbon atoms, 14 Hydrogen atoms and 1 oxygen atom

Answer:

True

Explanation:

Microscope is an instrument which is used to observe small objects. There are many types of microscope with a different magnitude.

Answer: It takes more energy to break the bonds of the reactants than is released when the  bonds in the products are formed

Explanation:

Endothermic reactions are defined as the reactions in which energy of the product is greater than the energy of the reactants. The total energy is absorbed in the form of heat. Thus it takes more energy to break the bonds of the reactants than is released when the  bonds in the products are formed

Exothermic reactions are defined as the reactions in which energy of the product is lesser than the energy of the reactants. The total energy is released in the form of heat. Thus More energy is released when the bonds in the products are formed than is used to  break the bonds in the reactants

Answer:

xdyd jdkdudktvko?ñhixiskrsjdjuxguxhicjovyx bhfoggu vohudixiyd siydyoxoyxyoxyixhoxiyxys ztiziyxyoxoyzyizitztixtx no se

hkgkfu

Explanation:

iyxyx yo gkxtuztizyidtiztizigxigxkhxhk. jvkgxitxoyfihciyxyixihxoyxyodyidtistusdtidti lo siento

Answer:

1.5

Explanation:

0.75M=Moles/2L

Answer:

D

Explanation:

The goal in this set up is to make sure all units cancel each other.

Since we need to go from grams to atoms, our final unit should be atoms.

Using method of elimination, let's see why other options are wrong.

A - Although 'g' is cancelled out, we are left with moles^2 / atoms

B - Although 'g' is cancelled out, we are left with moles^2 / atoms

C - Although 'mol' is cancelled out, we are left with g^2 / atoms

Answer: The answer is 4320

Explanation:

I got the answer correct

Answer:

in 4 liters of solution

MgSO4) are dissolved in 0.965 L of a 0.0575 M solution? Molar Mass Mg: 24.30 g/mol Molar Mass S: 32.06 g/mol Molar Mass O: 16.00 g/

Answer:

6.68

Explanation:

i did it and got it right

Answer:

Area of rectangular poster = [tex]\frac{3}{16}[/tex] yard²

Explanation:

P.S - The exact question is -

Given - A rectangular poster is [tex]\frac{1}{4}[/tex] yard wide and [tex]\frac{3}{4}[/tex] yard tall.

To find - What is its area ?

Proof -

We know that ,

The area of rectangle = Length × Breadth

Here,

Given that,

Length of rectangle = [tex]\frac{3}{4}[/tex] yard

Breadth of rectangle = [tex]\frac{1}{4}[/tex] yard

∴ we get

Area of rectangular poster = [tex]\frac{3}{4}[/tex] × [tex]\frac{1}{4}[/tex]  yard²

                                          = [tex]\frac{3}{16}[/tex] yard²

⇒Area of rectangular poster = [tex]\frac{3}{16}[/tex] yard²

Answer: no

Explanation: because silicon cannot share over 3 bonds

Answer:

a)82.5 g

Explanation:

To solve this problem we will use Avogadro's number, which states the number of formula units per mole.

Then we convert 1.41 moles of NaCl to grams, using its molar mass:

The closest answer is option a).

Answer:

Percent yield = 7.1%

Explanation:

The general reaction of the problem is:

Ca(OH)₂ + CO₂ → H₂O + CaCO₃

To solve this question we need to find theoretical yield using the amount of carbon dioxide added because:

Percent yield = Actual yield (3.22g) / Theoretical yield * 100

Theoretical yield is the maximum amount of product that could be obtained. To find it we need to convert the mass of CO₂ to moles. The moles of CO₂ = Moles of CaCO₃:

Moles CO₂ -Molar mass: 44.01g/mol):

20.0g * (1mol / 44.01g) = 0.454 moles CO₂ = Moles of CaCO₃ produced

Mass CaCO₃ = Theoretical yield -Molar mass: 100.09g/mol-:

0.454 moles * (100.09g / mol) = 45.5g of CaCO₃ = Theoretical yield.

Replacing:

Percent yield = 3.22g / 45.5g * 100

Answer:

The gas will occupy a volume of 1.702 liters.

Explanation:

Let suppose that the gas behaves ideally. The equation of state for ideal gas is:

[tex]P\cdot V = n\cdot R_{u}\cdot T[/tex] (1)

Where:

[tex]P[/tex] - Pressure, measured in kilopascals.

[tex]V[/tex] - Volume, measured in liters.

[tex]n[/tex] - Molar quantity, measured in moles.

[tex]T[/tex] - Temperature, measured in Kelvin.

[tex]R_{u}[/tex] - Ideal gas constant, measured in kilopascal-liters per mole-Kelvin.

We can simplify the equation by constructing the following relationship:

[tex]\frac{P_{1}\cdot V_{1}}{T_{1}} = \frac{P_{2}\cdot V_{2}}{T_{2}}[/tex] (2)

Where:

[tex]P_{1}[/tex], [tex]P_{2}[/tex] - Initial and final pressure, measured in kilopascals.

[tex]V_{1}[/tex], [tex]V_{2}[/tex] - Initial and final volume, measured in liters.

[tex]T_{1}[/tex], [tex]T_{2}[/tex] - Initial and final temperature, measured in Kelvin.

If we know that [tex]P_{1} = 121\,kPa[/tex], [tex]P_{2} = 202\,kPa[/tex], [tex]V_{1} = 2.7\,L[/tex], [tex]T_{1} = 288\,K[/tex] and [tex]T_{2} = 303\,K[/tex], the final volume of the gas is:

[tex]V_{2} = \left(\frac{T_{2}}{T_{1}} \right)\cdot \left(\frac{P_{1}}{P_{2}} \right)\cdot V_{1}[/tex]

[tex]V_{2} = 1.702\,L[/tex]

The gas will occupy a volume of 1.702 liters.

Answer:

then it is 5

Explanation:

because i said it is

Answer:

pH = 3.69

Explanation:

HCl is a strong acid. It will disscociates completely into dissoluted ions such that,

[tex][H^+]=2\times 10^{-4}\ M[/tex]

The formula for pH is given by :

[tex]pH=-log[H^+]\\\\pH=-log(2\times 10^{-4})\\\\pH=3.69[/tex]

So, the pH of the solution is 3.69.

The answer to your question is 4.

Answer:Calcium carbonate (CaCO3), essentially, is an ionic compound having the bivalent calcium and carbonate ions. But the carbonate anion is a polyatomic species. The carbon atom is bonded to all the three oxygen atoms by covalent bonds - two carbon-oxygen single bonds and one carbon-oxygen double bond.

Explanation:So it's ionic hope this helps u. Btw may i have brainlist plz.

Answer:

This involves negatively charged particles (electrons) jumping to positively charged objects. When you rub the balloons against the fabric they become negatively charged. They take some of the electrons from the fabric and leave them positively charged.

Explanation:

Negative charges attract to positive charges. If a balloon is not rubbed with the wool cloth, it has an equal amount of negative to positive charges, so it will attract to a rubbed balloon. When both balloons are rubbed with the wool cloth, the both receive negative charges, so they will repel each other.