Which substance would most likely form sedimentary rock?

Answer:

79%

Explanation:

Data obtained from the question include the following:

Input temperature = 100°C

Output temperature = 22°C

Efficiency =.?

Next, we shall convert celsius temperature to Kelvin temperature.

This is illustrated below:

T(K) = T (°C) + 273

Input temperature = 100°C

Input temperature in Kelvin = 100°C + 273 = 373K

Output temperature = 22°C

Output temperature in Kelvin = 22°C + 273 = 295K

Finally, we shall determine the efficiency of the locomotive as follow:

Efficiency = output /input x 100

Output = 295K

Input = 373K

Efficiency =?

Efficiency = output /input x 100

Efficiency = 295/373 x 100

Efficiency = 79%

Therefore, the efficiency of the locomotive is 79%.

Answer:

The answer is .209

Explanation:

I am unable to show the work for this as I did it online but I can assure you it is correct

Simple harmonic motion is important area of study because it provides information about model oscillations.

Simple harmonic motion refers to a periodic motion of a point along a straight line in which the acceleration is always towards a fixed point and is proportional to its distance from that point.

Simple harmonic motion is important in model oscillations such as wind turbines and vibrations in car suspensions.

So we can conclude that simple harmonic motion is important are of study because it provides information about model oscillations.

Learn more about motion here: https://brainly.com/question/453639

Answer:

v = 3.24 m/s

Explanation:

Since we don't have time, we can use the formula;

(Final distance - initial distance)/time = (initial velocity + final velocity)/2

Thus;

(x_f - x_i)/t = ½(v_xi + v_xf)

We are given;

x_i = 0 m

x_f = 5 m

v_xi = 0 m/s

v_xf = 5 m/s

Thus, plugging in the relevant values;

(5 - 0)/t = (0 + 5)/2

5/t = 5/2

t = 2 s

Using Newton's first law of motion, we can find the acceleration.

v = u + at

Applying to this question;

5 = 0 + a(2)

5 = 2a

a = 5/2

a = 2.5 m/s²

To get the speed, in m/s, of the block when it had traveled only 2.1 m from the top, we will use the formula;

v² = u² + 2as

v² = 0² + 2(2.5 × 2.1)

v² = 10.5

v = √10.5

v = 3.24 m/s

Answer:

[tex]2ax=v_{2}^{2}-v_{1}^{2}\\2a(\frac{65}{100})=230^{2}-0^{2}\\a=40692\frac{4}{13}m/s^{2}\\\\x=\frac{1}{2} at^{2}\\\frac{65}{100}=\frac{1}{2}(40692\frac{4}{13})t^{2}\\t=0.0101896s[/tex]

I've written all the needed equations for you. All you have to do is some replacements.

Please do not hesitate to ask further questions.

160 km

Hope this helps....

Answer:

t= 1,56 s ,   x= 124,8 m , v = (80 i^ - 15,288 j ) m/s

Explanation:

Este es un ejercicio de lanzamiento proyectiles, comencemos por encontrar el tiempo que tarda en llegar al piso

        y = y₀ + [tex]v_{oy}[/tex] t – ½ g t²

en este caso la altura inicial es y₀= 12 m y llega a y=0 , como es lanzado horizontalmente la velocidad vertical es cero (v_{oy}=0)

       0 = y₀ – ½ g t²

       t= √ (2 y₀/g)

calculemos

       t= √ ( 2 12 / 9,8)

       t= 1,56 s

El alcance del proyectil es la distancia horizontal recorrida  

        x = v₀ₓ t

        x = 80 1,56

        x= 124,8 m

La velocidad de impacto cuando toca el suelo

        vx = v₀ₓ = 80 ms

        [tex]v_{y}[/tex] = v_{oy} – gt

        v_{y} = - 9,8 1,56

        v_{y} = - 15,288 m/s

la velocidad es

       v = (80 i^ - 15,288 j ) m/s

Traducttion  

This is a projectile launching exercise, let's start by finding the time it takes to reach the ground

        y = y₀ + v_{oy} t - ½ g t²

in this case the initial height is i = 12 m and it reaches y = 0, as it is thrown horizontally the vertical speed is zero ([tex]v_{oy}[/tex] = 0)

       0 =y₀I - ½ g t²

       t = √ (2y₀ / g)

let's calculate

       t = √ (2 12 / 9.8)

       t = 1.56 s

Projectile range is the horizontal distance traveled

        x = v₀ₓ t

        x = 80 1.56

        x = 124.8 m

Impact speed when it hits the ground

        vₓ = v₀ₓ = 80 ms

        v_{y} = v_{oy} - gt

        v_{y} = - 9.8 1.56

        v_{y} = - 15,288 m / s

the speed is

       v = (80 i ^ - 15,288 j) m / s

The two resistors in parallel behave like 3 ohms.

I = V / R

Current = 12/3 = 4 Amps

Given that,

Mass of satellite = 500 kg

Gravitational force = 3000 N

We need to calculate the radius of the circular orbit

Using formula of gravitational force

[tex]F_{g}=\dfrac{GMm}{(R+h)^2}[/tex]

Where, G = gravitational constant

R = radius of earth

h = radius of the circular orbit

M = mass of earth

m = mass of satellite

Put the value into the formula

[tex]3000=\dfrac{6.67\times10^{-11}\times500\times6\times10^{24}}{(6.4\times10^{6})^2+h^2}[/tex]

[tex]h^2=\dfrac{6.67\times10^{-11}\times500\times6\times10^{24}-3000\times(6.4\times10^{6})^2}{3000}[/tex]

[tex]h=\sqrt{\dfrac{6.67\times10^{-11}\times500\times6\times10^{24}-3000\times(6.4\times10^{6})^2}{3000}}[/tex]

[tex]h=5073460.35\ m[/tex]

[tex]h=5.1\times10^{6}\ m[/tex]

(II). We need to calculate the speed of the satellite

Using formula of velocity

[tex]v=\sqrt{\dfrac{GM}{r}}[/tex]

Put the value into the formula

[tex]v=\sqrt{\dfrac{6.67\times10^{-11}\times6\times10^{24}}{5.1\times10^{6}}}[/tex]

[tex]v=8858.36\ m/s[/tex]

[tex]v=8.8\times10^{3}\ m/s[/tex]

[tex]v=8.8\ km/s[/tex]

(III). We need to calculate the period of the orbit

Using formula of  time period

[tex]T=2\pi\sqrt{\dfrac{r^3}{GM}}[/tex]

Put the value into the formula

[tex]T=2\pi\sqrt{\dfrac{(5.1\times10^{6})^3}{6.67\times10^{-11}\times6\times10^{24}}}[/tex]

[tex]T=3617.40\ sec[/tex]

[tex]T=1.00\ hr[/tex]

Hence, (I). The radius of the circular orbit is [tex]5.1\times10^{6}\ m[/tex]

(II). The speed of the satellite is 8.8 km/s.

(III). The period of the orbit is 1.00 hr.

Answer: C.) Neptune

Explanation:

The Gravitational Potential Energy (GPE) of a body is calculated using the formula :

GPE = mgh

Where m = mass of the body

g = acceleration due to gravity

h = distance above a surface

Mass = 10kg

h = 2m

Using the formula :

GPE of lamp on Earth: g = 9.8

GPE = 10 × 9.8 × 2 = 71.8J

GPE of lamp on Mercury: g = 3.59

GPE = 10 × 3.59 × 2 = 196J

GPE of lamp on Mars: g = 3.7

GPE = 10 × 3.7 × 2 = 74J

GPE of lamp on Neptune: g = 14.07

GPE = 10 × 14.07 × 2 = 281.4J

GPE of lamp on Uranus: g = 9

GPE = 10 × 9 × 2 = 180J

GPE of lamp on Pluto: g = 0.42

GPE = 10 × 0.42 × 2 = 8.4J

Neptune has the highest gravitational potential energy as the value of acceleration due to gravity acting on objects is highest on Neptune.

Answer:

The correct option is;

C) Neptune

Explanation:

The force of gravity is given by the equation;

[tex]F_g = G\dfrac{m_1m_2}{r^2} = m_2 \times g[/tex]

Where:

m₁ = Mass of the planet

m₂ = Mass of the body = 10 kg

r = The distance between the body and the planet = 2 m

g = Gravitational acceleration on the planet

G = Gravitational constant

Given that the potential energy, PE = m × g × h

We have that,

[tex]PE = m_2 \times g \times (r + 2) = G\dfrac{m_1m_2}{r^2} \times (r + 2) \approx G\dfrac{m_1m_2}{r^2} \times r = G\dfrac{m_1m_2}{r}[/tex]

Therefore, the gravitational potential energy is directly proportional to the acceleration of gravity, such that the body will have the most gravitational potential energy in the planet with the highest acceleration due to gravity which is Neptune with acceleration due to gravity of 14.07 m/s².

Answer:

this is because mercury is more dense than iron nail, while water is less dense than the nail.

Explanation:

Answer:

Density

Explanation:

This is because of difference in densities of iron nail, mercury and water. Iron nail is less dense than mercury so it floats on mercury while it is more dense than water so it sinks!

Answer:

Índice de refracción entre los dos medios = 1,43

Refractive index between the two media = 1.43

Explanation:

El índice de refracción entre dos medios se explica mejor entendiendo primero la refracción.

Cuando las olas se mueven de un medio a otro, a menudo experimentan un cambio de dirección con respecto al medio en el que viajan.

Por lo tanto, el índice de refracción se expresa como el seno del ángulo de incidencia dividido por el seno del ángulo de refracción.

El seno del ángulo de incidencia y la refracción utilizados en esta fórmula de índice de refracción se miden respectivamente con respecto a la vertical.

En esta pregunta Ángulo de incidencia = 35° a la horizontal = (90° - 35°) a la vertical = 55° a la vertical.

Ángulo de refracción = 35°

Índice de refracción entre los dos medios

= (Sin 55°) ÷ (Sin 35°)

= 0.8192 ÷ 0.5736

= 1.428 = 1.43 a 2 d.p.

¡¡¡Espero que esto ayude!!!

English Translation

The light passes from medium A to medium B at an angle of 35 ° with the horizontal border between the two. If the angle of refraction is also 35 °, what is the relative refractive index between the two media?

Solution

The refractive index between two media is best explained by first understanding refraction.

When waves move from one medium to another, they often experience a change in direction with respect to the medium in which they are travelling.

Hence, refractive index is expressed as the sine of angle of incidence dibided by the sine of angle of refraction.

The sine of angle of incidence and refraction used in this refractive index formula are both respectively measured with respect to the vertical.

In this question,

Angle of incidence = 35° to the horizontal = (90° - 35°) to the vertical = 55° to the vertical.

Angle of refraction = 35°

Refractive index between the two media

= (Sin 55°) ÷ (Sin 35°)

= 0.8192 ÷ 0.5736

= 1.428 = 1.43 to 2 d.p.

Hope this Helps!!!

Each infrared photon carries more energy than any microwave photon.

(If this statement is not one of the choices, then it's really sad that you couldn't show us the list of choices to select from.)

Answer:

The energy of infrared waves is more than that of microwaves.

Explanation: Just completed on Edmentum

Answer:

The apparent weight of a freely falling body is zero. When a body falls freely, it is falling with an acceleration =g. Thus the entire gravitational force acting on it is utilized in accelerating it and hence its weight is not felt.

Answer:

amongst the properties that makes aluminium a metal is that it is malleable and ductile...and it has high melting and boiling points

I hope that helps

Explanation:

properties of metals include

1. high melting and boiling points

2 high densities

3 malleability and ductility

Answer:

Writing of a story that ends with the character becoming poor with no friends.

Explanation:

There was a young girl who believed that all things revolve around her. She had the money, the power, the family, and the beauty to ensure she was the center of attention. She would always be the main focus, everywhere she goes.

But there came a time when she had a major misfortune. Her family had come upon unfortunate times. They are going to lose their money and may even be jailed for embezzlement. It was true that she had no idea what her parents had done but she was also so familiar with the 'princess' lifestyle that she did not know how to downgrade her lifestyle. And so, when this misfortune happened, she was unsure how to react. She also assumed that her friends will be there for her. Little did she know everyone was just after her wealth and influence and had nothing to do with genuine friendship.

In a few months, their family position moved from top to bottom, which everyone found hard to accept. She had to maintain her status while at the same time try to live up with that without losing her circle. But as rumors spread fast and she wasn't able to spend the way she would normally send, she eventually experienced a dwindled friend circle. And in about a year, she had lost all of her friends, couldn't even convince someone to stay with her faithfully and worse of all, she was also poor, the very status she had degradingly taunted other people with.

Answer:

A)   Wn = 90J

B)   W1 = 100J

     W2 = 10J

Explanation:

A) The net work done on the box is calculated by using the following formula:

[tex]W_n=(F_1-F_2)d[/tex]     (1)

F1 = 100N

F2 = 10N

d: distance on which the box is moved = 1m

You replace the values of the parameters in the equation (1):

[tex]W_n=(100N-10N)(1m)=90J[/tex]

The net work on the box is 90J

B) The total work done by each force is:

[tex]W_1=F_1d=(100N)(1m)=100J\\\\W_2=F_2d=(10N)(1m)=10J[/tex]

The first box does a work of 100J and the second force does a force of 10J

Answer:

The heat of formation of the products of the heating of sugar, which is caramel is higher and due to the new complexes formed such there is increased change in free energy between the products and the reactants of the sucrose decomposition by heating, making the reaction is irreversible

Explanation:

Sugar, also known as sucrose, C₁₂H₂₂O₁₁, is a disaccharide made up two monosaccharides, fructose, C₆H₁₂O₆, and glucose, C₆H₁₂O₆ joined together by a glycosidic covalent bond as such the molecule of sugar has one less molecule of H₂O than the fructose and the glucose it is made of which on heating the sugar the glycosidic bonds break and due to deficiency in the amount of H₂O the fructose and glucose combine with themselves to form caramel which has a much lower hydrogen and oxygen proportion such as C₂₄H₂₆O₁₃, which is darker and contains free radicals making caramel sticky.

Therefore, the heat of formation of the caramel is higher and due to the formation of the complexes there is increased change in free energy between the products than the reactants of the decomposition of sugar by heating, therefore, the reaction is irreversible.

Answer:

-1.25 m/s²

Explanation:

Use the formula a=(v-u)/t,

acceleration a = unknown

final velocity v= 0 m/s (rest)

initial velocity u = 10m/s

time t = 8s

a = (0-10)/8

a = -1.25 m/s²

Answer:

Take a look at the attachment below.

Explanation:

Current for each branch of the circuit is 2A and equivalent resistance of the circuit will be 5 ohms. The current through the battery is 6A.

An electric current is defined as a stream of charged particles, such as electrons or ions, moving through an electrical conductor or space, which is described as the flow of electric charge through a surface or in a control volume.

Current is expressed as:

I=V/R

Where, I is the current

V is the voltage

R is the resistance

For above given information,

Since all resistors have the same resistance, it would be fine to find only 1 branch as the current would be the same for all branches.

[tex]I=V/R_1[/tex]

I= 30/15= 2 A

Equivalent resistance for parallel circuits is the sum of reciprocals of each resistor.

[tex]1/R= 1/R_1+ 1/R_2+ 1/R_3[/tex]

1/R= 1/15+ 1/15 + 1/15

1/R=3/15

R = 15/3= 5 ohms

I = V/R

Where I is current, V is voltage and R is the equivalent resistance

=> I = 30/5

=> I = 6 A

Thus, current for each branch of the circuit is 2A and equivalent resistance of the circuit will be 5 ohms. The current through the battery is 6A.

Learn more about Current, here:

https://brainly.com/question/16979805

#SPJ2

Answer:

37.5m/s

Explanation:

a=(v-u)/t

0.5 = (v - 31) / 12.5

v - 31 = 0.5 x 12.5

v - 31 = 6.25

V = 6.25 + 31

v = 37.25m/s

Answer:

A) OA, AB, BC

B) 25m/s^2

C) see explanation

D) 25

E) Rest

Explanation:

From the Velocity time graph shown:

The positive slope = OA ; This is positive because, it is the point of uniform acceleration on the graph.

Constant slope = AB, the slope here is constant because, AB on the graph is the point of constant velocity.

-ve slope = BC

B) Acceleration of body in path OA.

Acceleration = change in Velocity / time

Acceleration = (150 - 0) / 6

Acceleration = 150/6 = 25m/s^2

C) Path AB is Parallel to the because it marks the period of constant velocity (that is Velocity does not increase or decrease during the time interval).

D) Length of BC

BC corresponds to the distance moved, that velocity / time

Velocity = 150 ; time = 6

Therefore Distance (BC) = 150/6 = 25

E.) Velocity =0 ; Hence body is at rest

Answer:

the ability of data to be duplicated well described reproducibility

Explanation:

Reproducibitity of a data is the ability of a data to be produced in multiple times using the same procedure. It is used to test how precise a data is and it's usually known as standard deviation

Reproducibility is the closeness of the understanding between the consequences of measurements of the equivalent measurand did with a similar procedure depicted in the relating logical proof (for example a distribution in a companion surveyed diary).

Answer:

the ability of data to be duplicated well described reproducibility

Answer:

The impacts of modern communication in our socio economic life includes;

a) Staying connected

b) Carrying out business transaction

c) Exceeding boundaries

d) Overcoming weakness and disability

e) Reaching out to a wider audience

2. It is possible to make long distant call to our relatives in other part of the country by direct distance dialing (DDD)

Explanation:

The telecommunication service called direct distance dialing allows a caller to make a call to a location outside the area where they are calling without the assistance of an operator. To make a direct dialing call, a subscriber or caller will be required to include extra prefix digits to the original number than for numbers within hers or his particular local area code.

Answer:

(a)   m1/m2 = 1/3

(b)   a = 0.75m/s^2

Explanation:

You have the following relations:

For an object of mass m1:

[tex]F_1=m_1a_1=m_1(3.00m/s^2)[/tex]       (1)

For an object of mass m2:

[tex]F_2=m_2a_2=m_2(1.00m/s^2)[/tex]        (2)

(a) In order to calculate the quotient m1/m2 you use the fact that F1=F2=F.

You divide the equation (1) into the equation (2):

[tex]\frac{F_1}{F_2}=\frac{F}{F}=1=\frac{m_1(3.00m/s^2)}{m_2(1.00m/s^2)}\\\\1=3.00\frac{m_1}{m_2}\\\\\frac{m_1}{m_2}=\frac{1}{3}[/tex]

The quotient m1/m2 = 1/3

(b) For the case of a mass of m1+m2, you have:

[tex]F=(m_1+m_2)a[/tex]         (3)

To find the values of the acceleration you divide the previous equation into the equation (2):

[tex]\frac{F}{F}=1=\frac{(m_1+m_2)a}{m_2(1.00)}\\\\1=\frac{m_1}{m_2}a+\frac{m_2}{m_2}a=\frac{1}{3}a+a\\\\1=\frac{4}{3}a\\\\a=\frac{3}{4}[/tex]

The new acceleratio for an object of mass m1+m2 is 3/4m/s^2 = 0.75m/s^2

Answer:

The correct option is;

Hire an environmental company to study the wetland and give recommendations of how to prevent flooding

Explanation:

Due to the environmental importance of wetlands which are important plant and animal habitats and a source of filtration of reserve of water moving into other surface water bodies and underground aquifers, serving also as a buffer zone to prevent erosion and flooding during heavy rain storms, proper, detailed and well informed environmental considerations are required

As such an environmental consultant services is needed for site analysis, appraisal and recommendation will be required to fast track the process of obtaining a permit.

Answer:

A

Explanation:

Answer:

Sound travels fastest through solids. This is because molecules in a solid medium are much closer together than those in a liquid or gas, allowing sound waves to travel more quickly through it. In fact, sound waves travel over 17 times faster through steel than through air.

Answer:

A) F_g = 8.9278 × 10^(-30)

B) F_e = 1.6 × 10^(-17) N upwards

C) F_m = 6.8 × 10^(-17) N downwards

Explanation:

A) Formula for gravitational force is;

F_g = m_e × g

m_e is mass of electron = 9.11 x 10^(-31) kg

F_g = 9.11 x 10^(-31) × 9.8

F_g = 8.9278 × 10^(-30) N downwards

B) Formula for Electric force is;

F_e = qe

q is charge on electron = 1.6 × 10^(-19) C

E is electric field = 100 N/C

F_e = 1.6 × 10^(-19) × 100

F_e = 1.6 × 10^(-17) N upwards

C) Magnetic force is given by the formula;

F_m = qVB

q is charge on electron = 1.6 × 10^(-19) C

V is velocity given as 8.50 × 10^(6) m/s

B is magnetic field = 50.0 μT = 50 × 10^(-6) T

F_m = 1.6 × 10^(-19) × 8.50 × 10^(6) × 50 × 10^(-6)

F_m = 6.8 × 10^(-17) N downwards

Answer:

The weight of barbell acting on a weight lifter is 80N.

Explanation:

Answer:

Horizontal component = 241 N

Vertical component =  287 N

Explanation:

Given:

Force =  F = 375 N

Referring to diagram attached, the force F is making an angle

theta = 20+30 = 50 with the horizontal.

Horizontal component = F*cos(theta) = 375*0.64278 = 241 N

Vertical component = F*sin(theta) = 375*0.76604 = 287 N

The vertical component of the force is  187.5 N  and the horizontal component of the force is  324.8 N.

A vector is a any quantity that has both magnitude and direction. We can resolve any vector into its vertical and horizontal components. The vertical component of a vector such as force is F sin θ while the horizontal component of the force is F cos θ.

Given the following information from the question;

F =  375 N

θ = 30.0°

Vertical component(Fy) = 375 N sin 30.0° = 187.5 N

Horizontal component (Fx) = 375 N cos 30.0° = 324.8 N

Learn more: https://brainly.com/question/13322477

Answer: 3.75 m/s

Explanation:

Average speed is distance covered per time taken.

If the time interval is from t = 2 to t = 10s

Then, the time taken will be

t = 10 - 2 = 8s

Given that the distance covered are 10 + 8 - 2 + 10

Since distance is a scalar quantity, we will only consider the magnitude and not the direction.

Total distance = 10 + 8 + 2 + 10 = 30m

Average speed = total distance/time

Substitute total distance and time into the formula

Average speed = 30/8

Average speed = 3.75 m/s