Answer:
what e said
Explanation:
Which of the substances have polar interactions (dipole–dipole forces) between molecules?
A. Cl2
B. F2
C. ClF
D. NF3
Answer:
F2 and Cl2 are non-polar because both contains same atom and they have same electronegativity.
ClF and NF3 have polar interactions because there is electronegativity difference between atoms.
Explanation:
The covalent bond is the chemical bond between atoms where electrons are shared, forming a molecule. Covalent bonds are established between non-metallic elements, such as hydrogen H, oxygen O and chlorine Cl. These elements have many electrons in their outermost level (valence electrons) and have a tendency to gain electrons to acquire the stability of the electronic structure of noble gas. The shared electron pair is common to the two atoms and holds them together.
Electronegativity is defined as the ability of an element to attract the electrons that link it to another element.
The covalent bond between two atoms can be polar or nonpolar.
When two atoms have different electronegativities, the one with the highest electronegativity will attract the electrons towards each other, giving rise to two opposite charges on the bond. That is, this generates that in a polar molecule there is separation between positive and negative charges. The bonds will be all the more polar the greater the difference in electronegativity between the bound atoms.
On the other hand, the non-polar covalent bond occurs between atoms of the same element or between atoms with very little electronegativity difference. It is thus characterized to molecules or bonds that do not exhibit any polarity.
A molecule is a dipole when there is an asymmetric distribution of electrons because the molecule is made up of atoms of different electronegativity. That is, dipole is formed when the molecule is polar.
So, dipole-dipole forces are forces of attraction between polar molecules. These molecules attract when the positive end of one of them is close to the negative of the other.
Given the above, F₂ and Cl₂ are non-polar molecules and ClF and NF₃ are polar molecules. Then ClF and NF₃ have polar interactions (dipole-dipole forces). -Brainly user
Hope this helps!What are the oxidation numbers of the atoms in this reaction?
Check all that apply.
Mg(s) + 2HCl(aq) → MgCl2(aq) + H2(g)
0 for Mg in Mg and MgCl2
0 for Mg(s) and H in H2
+1 for H in HCl
-1 for Cl in HCl
+2 for Mg in MgCl2
Answer:
2-5
Explanation:
I just did it.
The oxidation numbers of the atoms in this reaction are 0 for Mg(s) and H in H₂, -1 for Cl in HCl, +1 for H in HCl and +2 for Mg in MgCl₂
What is oxidation number?An oxidation number is a number assigned to atoms in molecules to show the general distribution of the electrons.
Oxidation state or number helps us describe the transfer of electrons.
The oxidation number/state is also used to determine the changes that occur in redox reactions.
Overall, the oxidation number of an atom in a molecule is the charge that the atom would have if all polar covalent and ionic bonds resulted in a complete transfer of electrons from the less electronegative atom to the more electronegative one.
Therefore, The oxidation numbers of the atoms in this reaction are 0 for Mg(s) and H in H₂, -1 for Cl in HCl, +1 for H in HCl and +2 for Mg in MgCl₂
Learn more about Oxidation number, here:
https://brainly.com/question/29263066
#SPJ2
A sample is found to contain 2.98x10^-10 g of salt. Express this quantity in nanograms.
This quantity = 0.298 nanograms(ng)
Further explanationMass is one of the principal quantities, which is related to the matter in the object
The main mass unit consists of 7 units of other than other units of mass such as quintals, tons, pounds, ounces:
Kilogram, kg
Hectogram, hg
Decagram, dag
gram, g
Desigram, with
centigram, cg
milligram, mg
Each unit descends then multiplied by 10, and if one unit increases then divided by 10
Conversion of other mass units:
10⁻³ g ⇒mg-milligrams
10³ g ⇒kg-kilograms
10⁻⁶ g ⇒µg-micrograms (mcg)
10⁶ g ⇒Mg-megagrams (tons)
10⁻⁹ g ⇒ng-nanograms
10⁹ g ⇒Gg-gigagram
10⁻¹² g ⇒pg-pikogram
2.98 x 10⁻¹⁰ g to nanograms(ng)
[tex]\tt 2.98\times 10^{-10}\times 10^9=0.298~ng[/tex]
trioxocarbonate iv acid
Answer:
Trioxocarbonate (iv) are salts derived from trioxocarbonate (iv) acid when it reacts with metals and metallic oxides. All trioxocarbonate (iv) salts of Sodium (Na), Potassium (K) and Ammonium(NH4+) are soluble while all others are insoluble.
How many grams of methionine (MW = 149.21) are needed to make 20 mL of a 150 mM solution?
Answer:
0.45 g
Explanation:
Step 1: Given data
Molar mass of methionine (M): 149.21 g/molVolume of the solution (V): 20 mLConcentration of the solution (C): 150 mMStep 2: Calculate the moles of methionine (n)
We will use the following expression.
n = C × V
n = 150 × 10⁻³ mol/L × 20 × 10⁻³ L
n = 3.0 × 10⁻³ mol
Step 3: Calculate the mass of methionine (m)
We will use the following expression.
m = n × M
m = 3.0 × 10⁻³ mol × 149.21 g/mol
m = 0.45 g
0.954 mol bromine is added to 1 L reaction vessel that contains 1.22 mole of hydrogen and 1 mole of HBr at 1500K. What is the partial pressure of hydrogen, bromine and HBr at equilibrium?
Answer:
Partial pressure of H₂ → 149.9 atm
Partial pressure of Br₂ → 117.2 atm
Partial pressure of HBr → 112.8 atm
Explanation:
The problem can be solved by the Ideal Gases Law.
In a mixture of gases we know that the sum of partial pressures values the total pressure in the vessel. And the total pressure in the vessel is generated by the total moles which are presennt.
Total moles = 0.954 moles + 1.22 moles + 1 mol = 3.174 moles
Let's apply the Law to determine the total pressure.
P . 1 L = 3.174 moles . 0.082 . 1500 K
P = 390.4 atm
Now we apply the mole fraction concept
Mole fraction (1) → moles of gas / total moles
Mole fraction (2) → partial pressure of gas / total pressure
In conclussion 1 = 2
Partial pressure of H₂ → (1.22 / 3.174) . 390.4 atm = 149.9 atm
Partial pressure of Br₂ → (0.954 / 3.174) . 390.4 atm = 117.2 atm
Partial pressure of HBr → (1 / 3.174) . 390.4 atm = 112.8 atm
Please help me I. Eg you
Answer:
fehrf beviubeibchvbiscv kie v sjb rlj jsrubw
Explanation:
In an aqueous solution, a 0.100 M solution of glucose is prepared with a total volume of 0.150 Liters. If the molar mass of glucose is 180.16 g/mol how many grams must the solution contain?
Answer:
2.70 g of glucose.
Explanation:
The following data were obtained from the question:
Molarity of the glucose solution = 0.1 M
Volume of solution = 0.15 L
Molar mass of glucose = 180.16 g/mol
Mass of glucose =.?
Next, we shall determine the number of mole of glucose in the solution. This can be obtained as follow:
Molarity of the glucose solution = 0.1 M
Volume of solution = 0.15 L
Mole glucose =?
Molarity = mole /Volume
0.1 = Mole of glucose /0.15
Cross multiply
Mole of glucose = 0.1 × 0.15
Mole of glucose = 0.015 mole
Finally, we shall determine the mass of glucose in the solution as follow:
Mole of glucose = 0.015 mole
Molar mass of glucose = 180.16 g/mol
Mass of glucose =.?
Mole = mass /molar mass
0.015 = mass of glucose /180.16
Cross multiply
Mass of glucose = 0.015 × 180.16
Mass of glucose = 2.70 g
Therefore, the solution contains 2.70 g of glucose.
The grams that the solution must contain is :
- 2.70 g of glucose.
Mole ConceptGiven:
Molarity of the glucose solution = 0.1 M
Volume of solution = 0.15 L
Molar mass of glucose = 180.16 g/mole
Molarity of the glucose solution = 0.1 M
Volume of solution = 0.15 L
Molarity = mole /Volume
0.1 = Mole of glucose /0.15
Mole of glucose = 0.1 × 0.15
Mole of glucose = 0.015 mole
Mole of glucose = 0.015 mole
Molar mass of glucose = 180.16 g/mol
Mass of glucose =.?
Mole = mass /molar mass
0.015 = mass of glucose /180.16
Mass of glucose = 0.015 × 180.16
Mass of glucose = 2.70 g
The solution contains 2.70 g of glucose.
Learn more about "Mole":
https://brainly.com/question/1269011?referrer=searchResults
________________naturally helps cold-blooded animals warm up so that they can function.
Question 5 options:
Radiation
Convection
Warm Water
Heating pad
Answer:
Warm Water
Explanation:
In warm temperatures, cold-blooded animals are more active and can travel more quickly. This occurs because heat activated reactions provide energy to move muscles. In the absence of heat the animal becomes slow and sluggish. So they are usually inactive and rest when it is cold. As they do not need to feed much, they spend less time looking for food, so this life strategy works for them.
Brainliest?
Answer warm water Explanation:i have the same question
A geologist studies rocks. Which of Earth's spheres would a geologist be most interested in?
Answer:
Lithosphere
Explanation:
Answer:
ether the crust or lithosphere
Explanation:
What volume, in L, of a 6.3 M K2SO4 solution contains 44.1 g of K2SO4?
20 POINTS!!
1. 14.07g of solid sucrose (C12H22O11) are dissolved in 0.35 L of water. What is the molarity of the solution?
2. What is the molarity of a sucrose solution with a concentration of 4.5 ppm (mg/L)?
3. What is the molarity of the same sucrose solution if you dilute 40 mL of it into a 500 mL volumetric flask?
Answer:
1. molarity is = 0.1174
2. molarity is = 9.3
3. molarity is =0.009392
Explanation:
Q#1.
mass of sucrose is 14.07g
molar mass of sucrose is 342 3g/mol
so, 14.07x1/342.3 = 0.0411
now the volume is of water is 0.35
so, 0.0411/0.35 = 0.1174
Q#2.
concentration is 4.5
so, 4.5x1/1000= 0.0045
then, 0.0411/0.0045 = 9.13
Q#3.
M1M1=M2M2
molarity of the same sucrose is 0.1174
so, diluted in 40mL
and the volumetric flask is 500mL
so, 0.1174x40/500= 0.009392
1.) A laser emits light of frequency 3.72 x 1014 /s. What is the wavelength of the light in m?
2.) Calculate the energy, in joules, of a single photon associated with frequency of 4.00x105/s
3.) Determine the frequency and energy of a photon whose wavelength is 2.57x10-7 m
explanation and work needed please
Answer:
1. λ = 806nm
2. E = 2.6504 × 10^-28J
3. a) f = 1.167 × 10^15 Hz
b) E = 7.73 × 10^-19J
Explanation:
1) The wavelength denoted by λ can be calculated using the formula:
λ = v / f
Where;
v = speed of light (3×10^8m/s)
f = frequency of light (Hz)
λ = 3 × 10^8/3.72 x 1014
λ = 0.80645 × 10^(8-14)
λ = 0.80645 × 10^-6
λ = 8.06 × 10^-7m
λ = 806nm
2) The energy (J) of a photon is calculated thus;
E = hf
Where;
h = Planck's constant (6.626 × 10^-34J/s)
f = frequency (4.00x10^5/s)
E = 6.626 × 10^-34 × 4.00x10^5
E = 26.504 × 10^(-34+5)
E = 26.504 × 10^-29
E = 2.6504 × 10^-28J
3. λ = v / f
2.57x10^-7 = 3 × 10^8 ÷ f
f = 3 × 10^8/2.57x10^-7
f = 1.167 × 10^(8+7)
f = 1.167 × 10^15 Hz
b) E = hf
E = 6.626 × 10^-34 × 1.167 × 10^15
E = 7.7325 × 10^(-34+15)
E = 7.73 × 10^-19J
the illustration shows how sonar can be used to study the deep ocean which type of waves does sonar use
Answer:
d
Explanation:
If 8.500 g CH is burned and the heat produced from the burning is added to 5691 g of water at 21 °C, what is the final
temperature of the water?
The final temperature = 36 °C
Further explanationThe balanced combustion reaction for C₆H₆
2C₆H₆(l)+15O₂(g)⇒ 12CO₂(g)+6H₂O(l) +6542 kJ
MW C₆H₆ : 78.11 g/mol
mol C₆H₆ :
[tex]\tt \dfrac{8.5}{78.11}=0.109[/tex]
Heat released for 2 mol C₆H₆ =6542 kJ, so for 1 mol
[tex]\tt \dfrac{0.109}{2}\times 6542=356.539~kJ/mol[/tex]
Heat transferred to water :
Q=m.c.ΔT
[tex]\tt 356.539=5.691~kg\times 4.18~kj/kg^oC\times (t_2-21)\\\\t_2-21=15\rightarrow t_2=36^oC[/tex]
11) Nitrogen oxides undergo many interesting reactions in the environment and in industry. Given the following information, calculate H for the overall equation:
2 NO2(g) + 1/2 O2(g) N2O5(s).
N2O5(s) 2 NO(g) + 3/2 O2(g), deltaH = 223.7 kJ
NO2(g) NO(g) + 1/2 O2(g), delataH = 57.1 kJ
delataH = ______kJ
12))))Write all coefficients, even if they are fractions or 1.)
(a) (Apply fractions as needed.)
______ _____(s) + ______ ______ (g) 5 NaCl(s)
(b) (Use the lowest possible coefficients.)
_______ _____ (s) + ______ _____(g) _____CaCl2(s)
(c) (Apply fractions as needed.)
_____ _____(g) _____O3(g)
(d) (Apply fractions as needed.)
______Mg(s) + _____ ______(s) + _____ ____(g) _____Mg3(PO4)2(s)
Answer:
one more time
Explanation:
shpuld i go
What two subatomic particles add up to make the mass?
what are 4 ways a mineral can form
Answer:
The four main categories of mineral formation are: (1) igneous, or magmatic, in which minerals crystallize from a melt, (2) sedimentary, in which minerals are the result of sedimentation, a process whose raw materials are particles from other rocks that have undergone weathering or erosion, (3) metamorphic, in which new minerals form at the expense of earlier ones owing to the effects of changing—usually increasing—temperature or pressure or both on some existing rock type, and (4) hydrothermal, in which minerals are chemically precipitated from hot solutions within Earth.
The mineral can be formed from volcanic gases, oxidation, crystallization from magma, sediment formation, or deposition from a saline fluid.
What is a mineral?A rock can be described as a collection of minerals. A rock that becomes so hot it melts and many minerals come out in liquids that are hot enough to melt rocks.
Magma can be defined as a melted rock inside Earth, a molten mixture of substances that can be hot to more than 1,000°C. When the magma cools slowly inside the earth, which provides mineral crystals time to grow large enough.
Granite is a rock that produces from slowly cooled magma, consisting of the minerals quartz, plagioclase feldspar which is shiny white, pink potassium feldspar, and black biotite.
When magma will erupt onto the surface of the Earth, it is known as lava. Lava cools more rapidly than magma when it is below the surface and mineral crystals do not have time to form. But the chemical composition remains the same as if the magma cooled slowly.
The mineral can be formed through hydrothermal processes, weathering, and metamorphic and igneous environments.
Learn more about minerals, here:
https://brainly.com/question/1333886
#SPJ2
Suppose that you are a scientist who studies climate changes. While examining the rings of tree trunks, you notice several very large tree rings. What can you conclude about the climate during those years?
Answer:
The climate was wet and cold
Explanation:
Answer:
The large tree rings allow you to conclude that the climate was either very warm or wet during those growing seasons, because greater than normal growth occurred.
Explanation: It is the edge sample response
How does the number of atoms or molecules in a system affect its thermal energy?
A. A system with fewer atoms and molecules has more thermal energy.
B. A system with more atoms and molecules has more thermal energy.
C. The number of atoms or molecules does not affect the thermal energy of a system.
D. Thermal energy increases as the atoms and molecules in a system move more.
Answer:
D. Thermal energy increases as the atoms and molecules in a system move more.
Explanation:
Thermal energy is a form of kinetic energy possessed by molecules of a system. The measure of this kinetic energy in an atom is called heat.
The average kinetic energy of a system is the temperature.
According to the kinetic theory, the more the particles move, the more their thermal energy. Thermal energy is often predicated on the velocity of the particles of the medium.An open flask sitting in a lab fridge looks empty, but it is filled with a mixture of gases called air. Calculate the number of molecules of gas the flask contains if the flask volume is 2.50 L , and the air is at standard temperature and pressure (STP).
Answer: The number of molecules of gas the flask contains is [tex]0.674\times 10^{23}[/tex]
Explanation:
According to ideal gas equation:
[tex]PV=nRT[/tex]
P = pressure of gas = 1 atm (STP)
V = Volume of gas = 2.50 L
n = number of moles = ?
R = gas constant =[tex]0.0821Latm/Kmol[/tex]
T =temperature = 273K (STP)
[tex]n=\frac{PV}{RT}[/tex]
[tex]n=\frac{1atm\times 2.50L}{0.0821 L atm/K mol\times 273K}=0.112moles[/tex]
According to Avogadro's law:
1 mole of gas at STP contains =[tex]6.023\times 10^{23}[/tex] molecules
Thus 0.112moles of gas at STP contains = [tex]\frac{6.023\times 10^{23}}{1}\times 0.112=0.674\times 10^{23}[/tex] molecules
The number of molecules of gas the flask contains is [tex]0.674\times 10^{23}[/tex]
The definition of having to do with the physical properties and terrain of an area refers to the
term
environmental
forecasting
meticulous
topographical
adjacent
Answer:
Topographical
Explanation:
When it comes to questions such as this one, the thing that could help you the most is a dictionary. A dictionary is an alphabetically arranged listing of words that contains various information about those words, such as their definitions, examples, origin, pronunciation, etc.
The term the given definition refers to is topographical. Topography is the study of the forms and features of land surfaces. The topography of an area refers to its physical properties and terrain or their description (e.g. how they're shown on a map).
Please help. Will give brainliest.
Answer:
B.
Explanation:
i think its B
The density of a substance is 1.63 grams per milliliter. What is the volume, in ml, of a sample of the substance with a mass of 5.40Kg? 1000 g = 1 kg
Answer:
############################
Explanation:
Weathering refers to the effects of exposure to A) insults B)pressure C)weather
Determine the volume (mL) of 15.0 M sulfuric acid needed to react with 45.0 g of
aluminum to produce aluminum sulfate.
Answer:
167 mL.
Explanation:
We'll begin by calculating the number of moles in 45 g of aluminum (Al). This can be obtained as follow:
Mass of Al = 45 g
Molar mass of Al = 27 g/mol
Mole of Al =?
Mole = mass /Molar mass
Mole of Al = 45/27
Mole of Al = 1.67 moles
Next, the balanced equation for the reaction. This is given below:
2Al + 3H2SO4 → Al2(SO4)3 + 3H2
From the balanced equation above,
2 moles of Al reacted with 3 moles of H2SO4.
Next, we shall determine the number of mole of H2SO4 needed to react with 45 g (i.e 1.67 moles) of Al. This can be obtained as:
From the balanced equation above,
2 moles of Al reacted with 3 moles of H2SO4.
Therefore, 1.67 moles of Al will react with = (1.67 × 3)/2 = 2.505 moles of H2SO4.
Thus 2.505 moles of H2SO4 is needed for the reaction.
Next, we shall determine the volume of H2SO4 needed for the reaction. This can be obtained as follow:
Molarity of H2SO4 = 15.0 M
Mole of H2SO4 = 2.505 moles
Volume =?
Molarity = mole /Volume
15 = 2.505 / volume
Cross multiply
15 × volume = 2.505
Divide both side by 15
Volume = 2.505/15
Volume = 0.167 L
Finally, we shall convert 0.167 L to mL. This can be obtained as follow:
1 L = 1000 mL
Therefore,
0.167 L = 0.167 L × 1000 mL / 1 L
0.167 L = 167 mL
Thus, 0.167 L is equivalent to 167 mL.
Therefore, 167 mL H2SO4 is needed for the reaction.
What is laughing gas?
Answer:
Nitrous oxide, commonly known as laughing gas or nitrous, is a chemical compound, an oxide of nitrogen with the formula N ₂O. At room temperature, it is a colourless non-flammable gas, with a slight metallic scent and taste. At elevated temperatures, nitrous oxide is a powerful oxidiser similar to molecular oxygen.
Explanation:
HURRY PLEASE HELP
Four students are discussing the benefits and problems associated with using nuclear energy as alternative energy source. Which student has the strongest argument about using nuclear energy?
A. Nuclear power plants pollute the environment and causes cancer in populations that use nuclear energy instead of traditional electricity.
B. Nuclear power plants provide more energy than traditional coal plants; however, nuclear power plants also produce more greenhouse gases.
C. Nuclear power plants run a high risk of nuclear meltdown killing all the organisms in a 20 mile radius.
D. Nuclear power plants provide more energy than traditional coal plants and these plants do not produce greenhouse gases.
Answer:
A
Explanation:
its A
facts o.o
Nuclear power plants pollute the environment and causes cancer in populations that use nuclear energy instead of traditional electricity. Hence option A is correct.
What is nuclear power plant?Nuclear power plant is defined as a particular kind of power plant that produces electricity by nuclear fission. Nuclear power plants use the heat generated by nuclear fission to transform water into steam in a controlled environment, which then powers generators to produce electricity. Low-enriched uranium fuel is used in nuclear power plants to generate electricity through a process known as fission, which involves breaking uranium atoms in a nuclear reactor.
A clean energy source with no emissions is nuclear. It produces energy by fission, which is the splitting of uranium atoms to release energy. Without the toxic consequences that come from burning fossil fuels, electricity is produced using the heat from fission to produce steam, which turns a turbine.
Thus, nuclear power plants pollute the environment and causes cancer in populations that use nuclear energy instead of traditional electricity. Hence option A is correct.
To learn more about nuclear power plant, refer to the link below:
https://brainly.com/question/424603
#SPJ2
How many mL (to the nearest mL) of 0.140-M KF solution should be added to 400. mL of 0.212-M HF to prepare a pH
Answer:
205mL of 0.140M KF solution
Explanation:
pH = 2.70 solution.
It is possible to obtain the pH of the buffer of HF-KF using the H-H equation:
pH = pKa + log [KF] / [HF]
Where pH is desire pH = 2.70
pKa is pKa of HF = 3.17
[KF] could be taken as moles of KF
And [HF] moles of HF: 400.0mL = 0.4L * (0.212mol/L) = 0.0848 moles of HF
Replacing:
2.70 = 3.17 + log [KF] / [0.0848 moles HF]
-0.47 = log [KF] / [0.0848 moles HF]
0.3388 = [KF] / [0.0848 moles HF]
[KF] = 0.02873 moles of KF must be added.
In mL using concentration of KF (0.140M):
0.02873 moles KF * (1L / 0.140 mol) = 0.205L =
205mL of 0.140M KF solution9.
Which of the following molecules has (have) polar bonds?
a water
b carbon dioxide
c formaldehyde
d two of the above
Answer:
two of the above
Explanation:
cK-12 Bond Polarity