Answer:
A. If motion starts and stop at the same location, then the displacement is zero
C. Distance is always greater than or equal to the magnitude of the displacement
Explanation:
The displacement of a body is a vector quantity that gives the shortest (straight line) distance moved by an object in motion, from its initial position to its final position. The displacement can also be described as the final position relative to the initial position of an object, such that the displacement vector, 's', is given as follows;
[tex]s = x_f - x _i[/tex]
The displacement gives the direct length between two points, with regards to the direction of motion between the points. It can only be described by both the magnitude and the direction
Therefore, displacement can be positive (forward motion), negative (backward motion), or zero (where there is motion that stops at the starting point)
Therefore, a correct options is; If motion starts and stop at the same location, then the displacement is zero
Displacement, being a vector quantity will have both magnitude and direction
Distance, however, is a scalar quantity, it specifies only magnitude, but does not specify direction
Distance, describes the length of the path taken from one point to the other. Distance gives the total movement a body makes, without regards to the direction of the motion
Therefore, distance is always positive or zero (here only the object is stationary)
Therefore, a correct option is; Distance is always greater than or equal to the magnitude of the displacement
Therefore, the correct options are;
If motion starts and stop at the same location, then the displacement is zero
A foot is 1/3 of a yard. What part of a meter is a millimeter?
1/2
1/5
1/100
1/1000
Answer:
Explanation:
1/1000
If a foot is 1/3 of a yard the 1/1000 part of a meter is a millimeter, therefore the correct answer is option D.
What is a unit of measurement?A unit of measurement is a specified magnitude of a quantity that is established and used as a standard for measuring other quantities of the same kind. It is determined by convention or regulation.
Any additional quantity of that type can be stated as a multiple of the measurement unit.
As given in the problem a foot is 1/3 of a yard then we have to find out what part of a meter is a millimeter,
1 meter = 100 centimeters
1 centimeters = 10 millimeters
1 meter = 100×10 millimeters
1 meter = 1000 millimeters
1 millimeters = 1/1000 meter
Thus, the 1/1000 part of a meter is a millimeter, therefore the correct answer is option D.
Learn more about the unit of measurement from here;
brainly.com/question/12629581
#SPJ6
a machine lifts a 35-kg object 20.0 m in 2.0s. How much power is produced bu the machine to lift the object?
The power is produced by the machine to lift the object is 3430 Watts.
What is power?Power in physics is the quantity of energy that is transported or transformed per unit of time. The watt, or one joule per second, is the unit of power in the International System of Units. Power is also referred to as activity in ancient writings. A scalar quantity is power.
Given parameters:
Mass of the object = 35 kg.
Height: h = 20.0 s.
Time taken = 2.0 s.
work done by the machine = mgh = 35 ×9.8 × 20.0 joule = 6860 joule.
Hence, power of the machine = work done/time = 6860/2.0 Watts = 3430 Watts.
Learn more about power here:
https://brainly.com/question/29575208
#SPJ2
Please help ASAP -multiple choice- will give brainliest
Answer:
C. An article written by a scientist
Explanation:
Research-based original articles written by a scientist can act as a primary source of information. Textbooks, dictionaries and encyclopedias are generally classified as secondary sources and are rarely primary sources.
describe what happens in terms of energy when you blow up a ballon and release it without trying its neck
Answer:
The answer is below
Explanation:
When a gallon is blown the air energy is saved as potential energy which is compressed inside the balloon. However, when the balloon is released without trying its neck, the air energy quickly turned to kinetic energy, in which the air energy keeps moving as the balloon float around the space.
Hence, in short, what happens in terms of energy when you blow up a balloon and release it without trying its neck is that the air energy moves from potential energy to kinetic energy.
Which of the following produces massive amounts of energy from atoms?
Fission.
Fusion.
Neither.
Both
Answer:
d, both
Explanation:
fission is the process of electrons from atoms coliding into other atoms which releases more electrons and when done right releases lots of energy.
fusion is the process of using intense heat and electromagnetic forces to force electrons to bind to atoms which releases lots of energy
Which resource would be the best choice to learn more information about studying martial arts?
I think videos help more than books when it comes to martial arts. You can get it on YouTu.be if your teacher doesn't teach you online, in this pandemic.
Answer:
The answer is A.) Dance studio.
Explanation:
See screenshot below
Hope this helps! :D
(Can you mark me brainliest?)
- ❤ 7272033Alt ❤
A velocity-time graph is plotted showing the motion of a car. If the graph is a curved line, it means that
(a) The car started at rest
(b) Acceleration was constant
(c) Velocity is increasing uniformly
(d) Velocity is changing non uniformly
If the velocity time graph is curved, it then means that the velocity is changing non uniformly.
What is the velocity time graph?The velocity time graph is used to describe the changes in the velocity of a body with time. The slope of the graph is known as the acceleration of the motion.
If the velocity time graph is curved, it then means that the velocity is changing non uniformly.
Learn more about velocity time graph:https://brainly.com/question/11290682
#SPJ6
Qual seria o consumo mensal de energia elétrica de um chuveiro de potência de 7000W quel funciona cerca de 10 minutos por dia??
Answer:
Monthly cost = 35.7
Explanation:
Given the following data;
Power = 7000 Watts
Time = 10 minutes
Number of days = 30 days
Conversion:
60 minutes = 1 hour
10 minutes = 10/60 = 0.17 hours
To find the monthly cost of electricity;
Energy = power * time
Energy consumption = 7000 * 0.17
Energy consumption = 1190 Watt-hour = 1.19 KWh (1 Kilowatts is equal to 1000 watts).
Next, to find cost of monthly energy consumption;
Cost = 1.19 * 30
Cost = 35.7
An athlete runs 600 m in 2 minutes and the next 1000 m in 1 minute on the same straight
path. What is his average speed and average velocity?
Answer:
Explanation:
Average speed is found by adding together the total distances traveled by the athlete and divide that total by the total time it took.
Average velocity is vector, which means it includes direction. If the athlete heads one way and then turns around, his displacement might actually be negative! Yikes! Let's look at speed first:
[tex]s=\frac{600+1000}{2+1}=\frac{1600}{3}=533\frac{1}{3}\frac{m}{min}[/tex]
Velocity is the displacements added together divided by the total amount of time it took. The displacement is the same as the distance here, since the athlete did not veer off his straight-path and didn't turn around.
Average velocity = average speed = 533.3 m/min
what is speed of light
[tex] {?} [/tex]
Answer:
[tex]3 \times {10}^{8} m {s}^{ - 1} [/tex]
299 792 458 m / s
Answer:
faster than u
Explanation:
Which of the following is a part of a constitutional republic
Laws are written by a king
People must obey the president.
People vote for representatives.
People cannot affect the government.
What is one characteristic of the organization of the Periodic Table?
Atoms of elements with the same electron configuration are organized in columns.
Elements are organized in alphabetical order.
Atoms of elements with the same atomic number are organized in diagonals.
Atoms of elements with the same volume are organized in columns.
Answer:
Atoms of elements with the same electons in the outer most shell they are put in the same group on the periodic table
How are plants propagated using
leaf and leaf-bud cuttings?
What is the speed of the car relative to the speed of the bicycle
Answer:
The highest speed officially recorded for a bicycle ridden in a conventional upright position under fully faired conditions was 100 km/h (62 mph) by Alale (be mola) over 200 m.
Explanation:
1. A 2.5 kg led projector is launched as a projectile off a tall building. At one point, as it
is flying through the air it has a velocity of 24 m/s and a height of 14 m.
a) Find the potential energy
b) Find the kinetic energy
c) Find the total mechanical energy
d) Find the potential energy at a height of 8.7 m
e) Find the kinetic energy at that same height. (Hint – the total energy is always the same
as in part c)
f) Find the velocity at that height
g) Find the velocity at a height of 11.6 m
h) At what height would the velocity be 26 m/s?
i) What is the velocity just before it smashes into the ground?
See
Answer:
Explanation:
I got everything but i. Don't know why but it's eluding me. So let's do everything but that.
a. PE = mgh so
PE = (2.5)(98)(14) and
PE = 340 J
b. [tex]KE=\frac{1}{2}mv^2[/tex] so
[tex]KE=\frac{1}{2}(2.5)(14)^2[/tex] and
KE = 250 J
c. TE = KE + PE so
TE = 340 + 250 and
TE = 590 J
d. PE at 8.7 m:
PE = (2.5)(9.8)(8.7) and
PE = 210 J
e. The KE at the same height:
TE = KE + PE and
590 = KE + 210 so
KE = 380 J
f. The velocity at that height:
[tex]380=\frac{1}{2}(2.5)v^2[/tex] and
[tex]v=\sqrt{\frac{2(380)}{2.5} }[/tex] so
v = 17 m/s
g. The velocity at a height of 11.6 m (these get a bit more involed as we move forward!). First we need to find the PE at that height and then use it in the TE equation to solve for KE, then use the value for KE in the KE equation to solve for velocity:
590 = KE + PE and
PE = (2.5)(9.8)(11.6) so
PE = 280 then
590 = KE + 280 so
KE = 310 then
[tex]310=\frac{1}{2}(2.5)v^2[/tex] and
[tex]v=\sqrt{\frac{2(310)}{2.5} }[/tex] so
v = 16 m/s
h. This one is a one-dimensional problem not using the TE. This one uses parabolic motion equations. We know that the initial velocity of this object was 0 since it started from the launcher. That allows us to find the time at which the object was at a velocity of 26 m/s. Let's do that first:
[tex]v=v_0+at[/tex] and
26 = 0 + 9.8t and
26 = 9.8t so the time at 26 m/s is
t = 2.7 seconds. Now we use that in the equation for displacement:
Δx = [tex]v_0t+\frac{1}{2}at^2[/tex] and filling in the time the object was at 26 m/s:
Δx = 0t + [tex]\frac{1}{2}(-9.8)2.7)^2[/tex] so
Δx = 36 m
i. ??? In order to find the velocity at which the object hits the ground we would need to know the initial height so we could find the time it takes to hit the ground, and then from there, sub all that in to find final velocity. In my estimations, we have 2 unknowns and I can't seem to see my way around that connundrum.
A tea kettle is warmed on an electric stove. After a while, water vapor builds inside the kettle and causes a whistle in the lid to make a sound. How does this demonstrate the first law of thermodynamics?
Answer:
The first law of thermodynamics states that the change in the internal energy of a system equals the net heat transfer into the system minus the net work done by the system. This is another way of saying that energy can neither be created nor destroyed, but it can be converted from one form to another form.
A tea kettle that is warmed on an electric stove is receiving heat energy, this heat energy increases the kinetic energy of the water particles in the kettle and makes them to move faster. As time goes on, the water begins to turn into vapors. The heat energy that is released into the system is been used to carry out the work of evaporation and the whistling of the kettle.
Explanation:
If you copy and paste it will give you full credit :)
Determine la inercia rotacional de una varilla de 4 m de largo y 2 Kg de mesa si su eje de rotación esta situado a la mitad de la varilla.
Answer:
I = 2.667 kg m²
Explanation:
The moment of inertia of a body can be calculated by the expression
I = ∫ L² dm
For high symmetry bodies the expressions of the moment of inertia are tabulated, for a rod with its axis of rotation at its midpoint it is
I = [tex]\frac{1}{12}[/tex] m L²
let's calculate
I = [tex]\frac{1}{12}[/tex] 2 4²
I = 2.667 kg m²
What color would my greenish blue fish look like if I had a light blue RGB light tank color?
Answer:
it would look greenish blueish
Explanation:
What is biomass energy?
a. Energy harvested from plant material
b. Energy harvested from recycled petroleum O c. Energy harvested from synthetic oil
d. Energy harvested from wind
Answer:
A.
Explanation:
Biomass energy can be harvested from plants, wood, waste, and living or once living organisms.
~ LadyBrain
Saturn's rings come from its ______
Answer:
Saturn's rings are thought to be pieces of comets, asteroids or shattered moons that broke up before they reached the planet, they are made of billions of small chunks of ice and rock coated with another material such as dust.
Explanation:
They are brought in by Saturn's powerful gravity :)
how can the movement of energy can be tracked by observing the changes the energy causes to matter
What the effect positively charged objects and negatively charged objects have on each other
Answer:
often Positive and negative charges balance each other which gives an overall neutral charge. if they are unbalanced then it will result in static electricity.
What current flows through a hair dryer plugged into a 110 Volt circuit if it has a resistance of 25 ohms?
Answer:
Ohm's Law says
V=I⋅R.
A bit of algebra says
I=VR So V= 110V 25 Ω=4.4VΩ=A
I hope this helps,
Explanation:
Your bike starts with an initial velocity of 1 m/s and you accelerate to 4 m/s in 6 seconds. How far did you travel while accelerating?
Answer:
78 m
Explanation:
Initial v = 1 m/s
a = 4 m/s²
t = 6s
[tex]x = v_{i} t + \frac{1}{2}at^{2} \\x = (1)(6) + \frac{1}{2} (4)(6)^{2} \\x = 6 + 72\\x = 78[/tex]
what are thedisadvantages of using alcohol instead of mercury in a thermometer?
Answer:
Disadvantages. It is less durable because alcohol evaporates faster than mercury. It cannot measure high temperature because of a low boiling point. It wets the walls of the thermometer, which can adversely impact the accuracy of readings.
What is formula for Electrical Power?! (with resistance included in it)
Answer:
V = I × R and the power law equation (formula): P = I × V. P = power
A ticker timer 50dots per second. When a body is pulled by a tap through the timer, the distance between the third and fourth dot is 3cm and the distance between fourth and fifth dot is 4cm.What is the acceleration of the body?
Answer:
Explanation:
Time for one dot = 1 /50 = .02 s
Distance between 3 rd and fourth dot is 3 cm and time taken to travel this distance is .02 s
velocity = 3 cm / .02 = 150 cm /s
Distance between 4 th and 5 th dot is 4 cm and time taken to travel this distance is .02 s
velocity = 4 cm / .02 = 200 cm /s
change in velocity = 200 cm/s - 150cm/s = 50 cm /s
Time taken = .02 s
Acceleration = 50 / .02 cm/s²
= 2500 cm/s²
Before the car launches, which objects have stored energy?
Answer:
maybeeeeeeeee launcherrr im not sureee hehe
Which of these is true of all simple machines?
A.Input force is always less than output force.
B.Work input is always greater than work output.
C.Work output is always greater than work input.
D.Output force is always less than input force.
Please help, if u can. i linked the picture down below :)
Answer:
For Parent #1 missing box it's t and for Parent #2 missing box is t