Which statement is true?

A.Temperature measures the average kinetic energy of particles.
B.Temperature equivalents indicate the same thermal energy.
C.Temperature depends on the density of the substance.
D.Temperature measures the thermal energy of object.

Answers

Answer 1
A.

When temperature increases the motion of particles also increases.

Related Questions

Jamal has Started all season as a safety. Last season,he was making a backup salary, which is 67% of what starters make. If Jamal is able to renegotiate his contract to the starter rate from the $400,000 he's currently making, what will his next salary be?round to the nearest whole number.

Answers

Answer: $597015

Explanation:

Let the salary of the starter be x.

Since Jamal earns $400,000 and makes 67% of what starters make, then this can be written mathematically as:

67% of x = $400000

67% × x = $400,000

67/100 × x = $400,000

0.67 × x = $400,000

0.67x = $400,000

x = $400,000 / 0.67

x = $597014.93

x = $597015

His next salary will be $597015

An example of a good electrical conductor is?

Answers

The answer is cooper!!

) Chain drive ratio is a the ratio between the rotational speeds of the input and output _________ of a roller chain drive system.

Answers

Answer:

Sprockets.

Explanation:

A chain drive is an efficient technique used for the transmission of mechanical power from one point to another. For example, it is used for transmitting power to the wheels of a bicycle, motorcycle, motor vehicle and other machineries such as chain saw etc.

Chain drive ratio is the ratio between the rotational speeds of the input and output sprockets of a roller chain drive system. This ultimately implies that, chain drive ratio is the ratio of the number of teeth on the driving sprocket (T1) divided to the number of teeth on the driven sprocket (T2).

Also, the chain drive ratio can be calculated by dividing the number of teeth on the large sprocket by the number of teeth on the small sprocket.

Additionally, the rotational speed of a sprocket is measured in revolutions per minute (RPM).

One of the issues with the roller chain is that, as the roller chain moves round the sprocket link by link, it affects its speed (surge) due to the change in acceleration and deceleration i.e the rise and fall of its pitch line.

What are some advantages of the nano ceramic coating for cars with explication

Answers

Answer:

Ceramic coating offers good protection to the car's surface. The nano-coating can protect the car from most scratches, dirt and chemical contaminants. Ceramic coating also doesn't have any side-effects to the original paint. Ceramic coating also lasts longer than regular paint.

Hope the helps..

Technician A says that the most effective way to diagnose wheel speed sensor circuit faults is to utilize the live data function of your scan tool. Technician B says that once you have identified the affected circuit, the next step is to test at the sensor with a graphing multi-meter or an oscilloscope. Who is correct

Answers

Answer:

Both Technicians A & B are correct

Explanation:

In diagnosing wheel systems, both steps said by technicians A & B are correct because it's the normal procedure to diagnose wheel speed sensor circuit faults.

Briefly describe an idea for a new product while thinking mainly about it cost analysis to depict what kinds of direct and indirect cost will be involved in its creation

Answers

can you give more of an explanation to what the product need sti be

Is a compass a analog or a digital sensor?

Answers

A compass is a analog sensor

What is the purpose of the graphic language?

Answers

Answer:

enables the representation, analysis and communication of various aspects of an information system. These aspects correspond to varying and incomplete views of information systems and the processes therein.

Stucco will shrink as it hardens and cures.
A. true
B. false

Answers

It’s true hope this helps you

Coving is a curved edge between a floor and a wall.
O True
O False

Answers

Uhmmmmmmm it’s True..

Answer:

True.

Explanation:

PLEASE HELP ASAP!!!!!!!!!!!!!!!!!!!!!!!!

Which of the following describe what the material of an object can impact?


achievements and failures

geometric shapes and figures

sustainability and durability

durability and achievement

Answers

Answer:

geometric shapes and figures

Answer:

Sustainability and durability

Explanation:

You are driving on a multi-lane road, and are following the vehicle in front of you at a safe distance. But then a car changes lanes into the gap in front of you, and slows down because the gap in front o them is too small. You should

A.Honk your horn, and then gradually drop back further behind the slowing car.

B.Quickly try to change lanes, and pass the slowing car if you can.

C.Slow down and drop back to a safe following distance behind the slowing car.​

Answers

Answer:

C. Slow down and drop back to a safe following distance behind the slowing car.​

Explanation:

the highway code contains the rules and regulations guiding the conduct of road users on a motorable roads. It is very important that a driver concentrates on the situation on the road whenever he/she is driving to reduce the event of avoidable accidents.

In the given scenario, since the car that changed lanes slows down due to small gap at its front, the appropriate thing to do is to slow down and follow by keeping a safe distance behind the slowing car.

Answer:

C.Slow down and drop back to a safe following distance behind the slowing car.​

Explanation:

I got this correct

Multiple Choice
Which option best characterizes Reese's choice of less-than-optimal materials in the following scenario?
Reese has just designed a vándshield for an extremely lightweidot car that can be transported by the military via helicopter. The engineers
wanted to use a specially formulated glass that is lighter than ordinary glass, but the cost was far above the budgeted amount for the
project's materials. Reese decides to use a plastic windshield instead.
Economic considerations should never be placed above safety when designing a model
Economic considerations can endanger the safety of a model.
Economic considerations must be considered vihen designing a model
Economic considerations are the most important factor vihen designing a model

Answers

Answer:

Economic considerations must be considered when designing a model.

Explanation:

The engineers wanted to use a specially formulated glass which was lighter than ordinary glass for the design requirement of light weight and portability with helicopter. However the cost was very high than the budgeted amount for the material to be used in the project. The alternative was to use a plastic wind shield. In design perspective considering the weight and portability criteria, this will still work .In the economic perspective, the budget will fit. This concludes that economic considerations must be considered when designing a model. Though this factor might not be the most important one , but it helps in ensuring projects budgets are within expected margins.

Answer:

"The client will use the information gathered from the original design and modify the vehicle."

Explanation:

Help me with this for brainiest:)

Answers

gsvshhenejwnbbwbdbdhebwn

Technician A states that a pressure bleeder may be needed to bleed EBC system hydraulic circuits. Technician B states that once the scan tool indicates that the HCU is bled, it may direct you to bleed the brakes manually to remove any remaining air from the system. Who is correct

Answers

Answer:

Both Technician A and Technician B

Explanation:

ABS modulators such as the Ford EBC310 version which are not equipped with bleeders are to have there valves cycled and their pumps activated to enable the bleeding out areas which are not easily bled by the wheel based bleeding

The brakes can be either pressure bled or bled manually, however, the HCU will require additional processes to completely bleed out the system, such as the use of a scan tool

where has the process of nuclear fusion been occurring for over four billion years

Answers

Answer:

Inside the Sun.

Explanation:

Inside the Sun, this process begins with protons (which is simply a lone hydrogen nucleus) and through a series of steps, these protons fuse together and are turned into helium. This fusion process occurs inside the core of the Sun, and the transformation results in a release of energy that keeps the sun hot.

Other Questions
Which of the following statements which does not express a value from the story of Odysseus and the Cyclops? Select all the correct following.A. Odysseus went to the island of the Cyclops because he wanted his men to prove their bravery.B. Odysseus expected the Cyclops to give them provisions because strangers were supposed to be treated kindly and given gifts.C. The Cyclops invited Odysseus into the cave because he wanted to share the warmth of his fire with his guests. A car is traveling 60 miles per hour. How long will it take to travel 240 miles? Determine the energy lost, due to friction, as an 8000 N car that skids to a stop, if its initial velocity was 12 m/s. Which of these electron configurations is not possible? Read the following lines from the poem. The poet includes these lines most likely to suggest that the speaker A does not wish to be pushed on a swing B wants to deal with the situation alone C does not often receive help from othersD is not physically strong What is the equation, in point intercept form, for a line that goes through (2, -6) and has a slope of -3/4The answers are in the photo.Oh and ignore the highlighted answer I mistakenly hit it.I will give Brainlyist!!! The 2014 balance sheet of Steelo, Inc., showed current assets of $3,135 and current liabilities of $1,545. The 2015 balance sheet showed current assets of $3,100 and current liabilities of $1,545.What was the companys 2015 change in net working capital, or NWC? (Do not round intermediate calculations. Negative amount should be indicated by a minus sign.)Net working capital$ XX=Female XY=Male.your best friend has five children and they are all boys. They are expecting their 6th child. What would be the probability for their 6th child to be a girl? Why Evaluate15/r when r=5 you can't even be able to describe the brainly community.its like we're nice...but then again we're toxic as helI.DangGGG Graph -5 1/4 on the number line. Click on the number line to identify the number's location. help me ples 20 point For an object to have potential energy it must be...?A) At restB) Light weightC) MovingD) Elevated (height)Please I need help, thank you! Please help me I beg! THIS IS URGENT, PLEASE ANSWER ASAP!In an isosceles trapezoid, how do you prove the base angles are congruent? What is 9m + 6 = 87please help im desperate fwhe Personification can be defined as:A)the process of giving an abstract or inanimate object human characteristicsB)the formation of mental images, figures, or likenesses of things, a collection of imagesC) the focus of poetic intent on thoroughly describing one particular aspect of somethingD) two or more stressed syllables that have the same consonant sound or sound group Fill in the blanks. Remember to spell correctly. The ocean north of Canada is the ______ Ocean, and to the east is the ______ Ocean. What is the product of 12 and 5 decreased by 17 Solve for s.72=27+9sHow do you solve for s?